As the Nicolai Tesla and Thomas Edison war ragged on between the
adoption of DC versus AC for commercial power distribution, Edison was
said to have engaged in a large financed propaganda campaign call
Tesla's AC distribution method the currents of death. This included
graphic cartoons of the
--
Message: 5
Date: Tue, 10 Feb 2015 13:06:10 -0500
From: Tom W8JI w...@w8ji.com
To: topband@contesting.com, Ws9v w...@royell.net
Subject: Re: Topband: HVDC
Message-ID: 211423F3EBEA4A55869EB37C0B05EA04@MAIN
Content-Type: text/plain; format=flowed; charset=UTF-8;
Gents:
The shock one would get under such circumstances was one of the reasons
that early studies into the effects of HV AC lines were flawed. I believe even
Brodeur's work cited this erroneous work. Apparently, the studies included the
effects of HV fields on rabbits, kept in screened
I have never had any personal experience with HVDC but I do have a
personal experience with HVAC power lines that I will never forget.
I lived in Highland Indiana, about 1/2 mile south of I-80 and in
between there were HVAC power lines and there were no houses
underneath them and it was a
I think my message was sent prematurely..sorry.As I was saying, my DXers
dream location is located only 1/2 mile from the main 550kV line from the
nuclear plant on Lake Huron to London, ON. I have NE and S Beverages that
point right at it in the winter. The only time this power line gives
w8ji at w8ji.com
Wed Feb 4 11:32:18 EST 2015
I just twist my wires in a
coherent lump, flux it with liquid flux, and flood the twisted area with
solder. If I get really sophisticated, I slide a piece of copper pipe over
the twisted area, crimp it, and flood the whole inside with
You don't step off a combine when harvesting under HVAC lines. You learn to
jump off real quick.
I think it is capacitive coupling. The larger combines pack a real wallop
when under HVAC lines.
I lived near Portland Oregon for a long time. There was a 480 KV line about
a mile away. Fizz with a
Note... It's necessary to remove the space from that url. Thanks, though!
Jeff W6JK
On Wednesday, February 11, 2015 5:50 AM, K1FZ-Bruce k...@myfairpoint.net
wrote:
500 feet is too long for a low band BOG unless sitting upon an
insulating earth like sand.
For info see
500 feet is too long for a low band BOG unless sitting upon an
insulating earth like sand.
For info see www.qsl.net/k1fz/bogantennanotes/index.html
73
Bruce-K1FZ
On Wed, 11 Feb 2015 09:41:45 +, Larry via Topband
topband@contesting.com wrote:
Sent this before, and not sure it made it,
Hi James,
Thank you for the hint. I read the article, and I see t's a very good
solution. For the moment I can't install this elevated FCP.
I have to mention my soil is good, quite wet most of the winter.
73 Ady YO2NAA
-Original Message-
From: James Bennett [mailto:w6...@me.com]
Sent:
You didn't say how long the horizontal portion of your inverted-L was. If
we knew that, that would help us help you. :-)
FWIW, W1BB himself said that an inverted-L could have a vertical section of
only 25 feet, and still be worthwhile.
73, Mike
www.w0btu.com/160_meters.html#inv-l_antenna
On
I’ve also posted this on the RFI reflector.
I’m hearing a peculiar RFI tone on 160m and 80m. It’s two tones. One is a long
tone with a short OFF. The other is approximately 13 kc lower and is ON exactly
when the first tone is off. Sometimes the second tone appears plus and minus 13
kc from the
Since getting the new 630m band (472-479KHz) here in Canada, one of my
favorite ways of promoting interest in the new band has been 'crossband'
activity ... that is, transmitting on 630m while the other stations transmit
on a predetermined announced HF (QSX) frequency, usually on 80 or 160m.
I've been ham since 1969 and there has always been a issue with DQRM.
Mike N2MS
- Original Message -
From: Donald Chester k4...@hotmail.com
What does it say about the state of amateur radio to-day, that the term
DQRM has entered our jargon?
Yes, it has been with us a long time.
Sent this before, and not sure it made it, or perhaps it was not worth
responding to-
I have been contemplating listening antennas, and after hearing a
friend work station after station that I could hear only down in the
noise on my inverted Vee, while he was using a 500' Beverage on the
Mike Waters mikew...@gmail.com wrote:
You may have seen an old Wullenweber antenna array at one of those older
FCC sites. IIRC, one is (or was) on the east coast. AFAIK, the Wullenweber
is not used anymore by the FCC and is scheduled to be (or already has been)
replaced with a different
Those Hammy Hambone radial plates I have seen advertised are considerably
more expensive than a handful of silver brazing rods and a Mapp gas outfit.
Don,
All good points. A few weeks back, there was a discussion here about the
virtues of using MAPP gas or acetylene with silver brazing rods.
500 feet is too long for a low band BOG unless sitting upon an
insulating earth like sand.
For info see www.qsl.net/k1fz/ bogantennanotes/index.html
73
Bruce-K1FZ
On Wed, 11 Feb 2015 09:41:45 +, Larry via Topband
topband@contesting.com wrote:
Sent this before, and not sure it made it,
18 matches
Mail list logo