Hello Roger
Well, Monday night had very good conditions. There were hardly any
stations on, but those that were sounded great. I worked a DL station
who was QRP, and he was peaking at 559. Then ON4WW called me and said he
was running 1 watt. He was 559 also! He was over S9 when he ran his KW!
Test
NR1DX
--
Dave manu...@artekmanuals.com www.ArtekManuals.com
--
This email has been checked for viruses by Avast antivirus software.
https://www.avast.com/antivirus
_
Searchable Archives: http://www.contesting.com/_topband - Topband Reflector
I gather there's been a lot QRN across North America over the past week . .
.
But from QSOs and RBN reports it seems that conditions on 160 have improved
the last few days.
So hopefully we will see a lot more QSOs tomorrow night !
73 Roger G3YRO
_
Searchable Archives: http:/
Very interesting Andy. Please a little more information about the LOG. Is it
30m on each side, or 30m total length?
Wes N7WS
On 1/17/2022 10:16 PM, Andree DL8LAS via Topband wrote:
Hey gentlemen,today I campared my new LOG, it is 30m in the square,signals
from NA were weak here , but a g
On 1/18/2022 10:30 AM, David Harmon wrote:
even though I have a TS-890 I have not tried the preamp with the DXE amp
shutoff.
Why not? It's a button push.
Wes N7WS
_
Searchable Archives: http://www.contesting.com/_topband - Topband Reflector
I use a 6ft diameter 4-turn loop as my 160m DX Receive antenna . . .
If it's only used on receive, you can easily make a tiny transformer between
the Loop and the coax . . . so Common Mode pickup wouldn't be a problem.
I have a pre-amp in the shack on the Loop . . . that's set so that local
sig
My loop has an amp located at the loop but the sig at the radio was waaay
down.I added a DXE broadband amp at the operating desk to get the sigs back to
parity with my vertical.An internal preamp in a modern radio might do the trick
but even though I have a TS-890 I have not tried the preamp wi
Haven't seen much in the way of public replies to this, so hope that
you've got some private ones.
For a small mag loop, I'd use the preamp at the loop, especially if
your feed line is coax.
73
Nick
VE7DXR
At 15:09 2022-01-16, Chris Maness wrote:
Do preamps need to be close to electric
Date: Mon, 17 Jan 2022 20:18:52 + (UTC)
From: Mike Furrey
To: 'Kenny Silverman' , 'TopBand List'
Subject: Re: Topband: 1:2 UNUN
< Perhaps a "hair pin" match? I used a hair pin coil at the base of a
vertical that was 35 ohms.
<73, Mike WA5POK
## a simple helical hairpin is the r