to that signals were below average.
73 Henk PA5KT
Op 23-2-2023 om 10:21 schreef Roger Kennedy:
It's always fascinating how very localised DX Propagation can be on Top
Band, I noted how several Europeans said that propagation to NA was very
poor over the weekend, whereas I found it pretty good.
73
Hi,
I updated the article about by 160/80 vertical.
See:
https://www.pa5kt.com/index.php/projects/15-vertical-for-160m-80m
73 Henk PA5KT
_
Searchable Archives: http://www.contesting.com/_topband - Topband Reflector
to the east was 8 points.
73 Henk PA5KT
Op 16-3-2021 om 01:17 schreef List Mail:
Conditions were terrible here on the weekend. Storm static on Saturday night
and poor propagation, and continuing poor propagation on Sunday night but with
less storm static. I heard a few NA stations, but none
Hi,
I have a receiver running with FST4 on 160m.
Dial is on 1839.
I dont like digital (or SSB) qso's so will be receive only.
If I use my equipment for CW it will be switched off.
73 Henk PA5KT
_
Searchable Archives: http://www.contesting.com/_topband - Topband Reflector
It is USB, so that signal will be on 1841 kHz.
Henk PA5KT
Op 3-2-2021 om 12:00 schreef Roger Kennedy:
You guys feed audio into an SSB rig for these Computer modes, right?
So which sideband do you use on Top Band?
IE if you are on 1840kHz with a 1kHz tone, are you on 1839 or 1841?
Roger
I had the 18m spiderpole and now I am using the 22m spiderpole.
It is guyed with 4x2 guys.
It is a stable mast. I raise it by hand by extending the tubes one by one.
I would not place the mast over another tube. The tubes cannot handle
force from inside.
73 Henk PA5KT
Op 7-12-2020 om 13:01
That is because for some people it can be useful information if they
want to make contacts.
What is DX or not is up for the listener.
There is nothing different then with CW spots.
73 Henk PA5KT
Op 13-5-2020 om 01:58 schreef Roger Kennedy:
Why oh why do some people post on the DX Cluster
Hi,
I use a miniVNA pro with bluetooth Bluevna software to my Android
smartphone or tablet.
You can calibrate it with your feedline connected so you do real antenna
measurement.
73 Henk PA5KT
Op 3/27/2016 om 21:08 schreef dick.bingham:
Greetings All
I am getting fed up with multiple
in the
band.
I made 25 qso's last weekend and stayed away from 160m. Lot of other
nice things to do.
73 Henk PA5KT
Op 2/29/2016 om 17:01 schreef Roger Parsons via Topband:
Thank you for your comments Tom.
The NA band plan has phone at above 1840kHz. My proposal is for phone above
1817kHz
During contest when the band is full with CQ machines I used to listen
below 1810 to check out conditions. There are always stations active and
as that part is always clear it is very useful to check if I can hear NA.
It would be very effective to work split around 1810.
73 Henk PA5KT
Op 2/3
radial system.
I do not have experience with these commercial available antennas as I
have tree of that height which I use.
73 Henk PA5KT
Op 1/1/2016 om 5:16 PM schreef K4OWR:
Does anyone recall that I originally asked about this?
http://www.dxengineering.com/parts/dxe-160va-1?seid=dxese1
Hi,
I am connected to the chat almost all day.
I see most messages related to 160m. Did even not know it was also 40m.
Did that recently change?
Think 60% is 160m, 30% 80m, 9% general messages and 1% 40m.
73 Henk PA5KT
Op 12/6/2015 om 05:48 schreef Mike Waters:
Thanks, but that doesn't fix
Another website with a measurement tool:
http://www.technik.dhbw-ravensburg.de/~lau/gc.html
I did not yet try this or N6LF's system.
73 Henk PA5KT
Jorge Diez - CX6VM schreef op 4/22/2015 om 7:34 PM:
Thanks Jim
I will look at N6LF website, I want to measure my soil conditions
73,
Jorge
hunting.
73 Henk PA5KT
James Bennett schreef op 1/9/2015 om 6:50 PM:
Hi folks - I’m trying to complete my WAS on 160 and need a confirmed QSO with
anyone in the following five states: LA, MS, SC, WV, VT.
I run an Elecraft K3/KPA500 into an Inverted L with a K2AV-designed FCP under
it. Got
in the countryside was a good investment.
Hope to work more dx.
73 Henk PA5KT
_
Topband Reflector Archives - http://www.contesting.com/_topband
it on a regular 1/4 vertical and
where on a HF[6|9]V?
73 Henk PA5KT
jcjacob...@q.com schreef op 8/11/2014 9:34 PM:
How do,
The thread on ferrites has been most interesting, but it leaves a question or
two unanswered. Please be kind to an old timer.
The scenario: Butternut HF6V (or any hf vertical
stick to JT65.
73 Henk PA5KT
Mike Waters schreef op 3/3/2014 7:57 PM:
Since there has been recent discussions on this reflector about JT65 on
1838, I thought I would pass this on.
IMO, digital should go below 1810, AND it should preferably be a narrow
band mode such as the superior JT9 mode
Search for Feldkabel on ebay.de. Most sellers also ship to rest of Europe.
73 Henk PA5KT
Op 8/29/2013 7:28 PM, ct1...@sapo.pt schreef:
Hi
I am also interested in any european source :)
Very hard to find this wire
Filipe CT1ILT F4VPX
Quoting Neil G0JHC g0...@blueyonder.co.uk:
Those
pretty fast. Last dx at 07:33 with W0AIH.
I stopped at 07:45.
Sunday evening was the same, only EU no Asia, only some middle east
heard. (Not worked as too many stations only calling and not listening).
I did work 2 TX stations, but used to work more.
73 Henk PA5KT
Op 28-1-2013 1:45, Mike(W5UC
19 matches
Mail list logo
