Hi,
I intend to connect a K9AY antenna to socket 3 of an FTDX101D, this socket
being menu configured as Rx input. The problem is I measured about 1,5 V on
the K9AY coax loaded with 50 ohms with 100W forwarded to the Tx antenna and
I wonder if it is safe for the Rx part of the radio. With full
Hi,
FT8, JT65 and similar modes are just computer to computer "QSOs".
I expect DXCC CW and DXCC SSB will still be praised while DXCC DIGI or Mixed
will soon have no much value.
73, Mirek
SP5ENA
-
Original Message-
From: Topband [mailto:topband-boun...@contesting.com] On Behalf Of
Hi,
In my opinion, a high selectivity device at the front end will help
regarding noise and QRM only in case of relatively poor IM3 receiver.
73, Mirek
SP5ENA
-Original Message-
From: Topband [mailto:topband-boun...@contesting.com] On Behalf Of Matt
Murphy
Sent: Thursday, December 22,
