Yes.
On 3/21/2017 9:54 AM, Pete Rimmel N8PR wrote:
I keep reading about all the WSPR and other low power modes where one person
was heard all around the world. Well, maybe on a given night that can happen.
-23 on JT65 is 10 dB below the threshold where a CW signal can be copied by
ear...
I too am using something similar, if not less effective, a Butternut HF 2v
with a homebrew TBR160 coil installed on a pushup mast 25 feet from terrace
(2nd floor) level, with 2 radials for 80 and 40m squeezed into my tiny 1400
sq feet terrace perimeter sloping around. Max power I have is 100W. I
Hi all,
One of the locals here is very into the JT -modes, almost exclusively
on topband. He uses 100W into a single Inv-L with two 1/4-wave radials
and nothing for RX. I think he's about halfway to 160 DXCC in a
calendar year and reports working everything he hears barefoot -- but
again, no RX
The QRP guys will be miffed.
On 3/17/2017 12:48 PM, James Wolf wrote:
If I find someone on 160 in zone 23 that uses JT65/9 can someone give me a
reason we should not use 1000 watts?
Jim - KR9U
_
Topband Reflector Archives - http://www.contesting.com/_topband
BD0AAI is zone 23 and likes JT modes and cw.
JC
N4IS
-Original Message-
From: Topband [mailto:topband-boun...@contesting.com] On Behalf Of James
Wolf
Sent: Friday, March 17, 2017 3:49 PM
To: 'List-Topband' <topband@contesting.com>
Subject: Re: Topband: JT65 on 160
If I find s
If I find someone on 160 in zone 23 that uses JT65/9 can someone give me a
reason we should not use 1000 watts?
Jim - KR9U
_
Topband Reflector Archives - http://www.contesting.com/_topband
"Overloading everyone's RX front end" is not correct.
The problem is that these narrow digital modes are received using the full
bandwith of the SSB filter.
73, Mike
www.w0btu.com
On Mar 17, 2017 1:19 PM, "Wes Stewart" wrote:
Do you guys use lousy receivers for these
Do you guys use lousy receivers for these modes? Why would the mode affect the
abilities of a receiver?
Wes N7WS
On 3/17/2017 11:06 AM, Jim Jim wrote:
...if you use high power you are going to start overloading everyone RX front
end and you will be the only one able to use the band.
Hello Jim and others for the replies
Just getting information to do well and not disturb anyone.
73,
Jorge
CX6VM/CW5W
2017-03-17 15:06 GMT-03:00 Jim Jim :
> Jorge,
> I use only 35-50w on TB. A few years ago I worked VKs and Zls using only
> 35watts then went down the