like carbon film.
- Original Message - From: Tom W8JI w...@w8ji.com
To: Bruce k...@myfairpoint.net; topband@contesting.com
Sent: Tuesday, September 24, 2013 2:55 PM
Subject: Re: Topband: Beverage antenna terminations
What kind of resistors are you using?
They shouldn't do that if you use
After recent night time thunder storm activity, two Beverage antennas lost some
directivity. Termination resistors looked normal, but an ohmmeter checked
reviled they had each gone
hundreds of ohms higher. Replaced resistors and back to normal.
73
Bruce-K1FZ
What kind of resistors are you using?
They shouldn't do that if you use the right type.
- Original Message -
From: Bruce k...@myfairpoint.net
To: topband@contesting.com
Sent: Tuesday, September 24, 2013 8:50 PM
Subject: Topband: Beverage antenna terminations
After recent night time
terminations
What kind of resistors are you using?
They shouldn't do that if you use the right type.
- Original Message -
From: Bruce k...@myfairpoint.net
To: topband@contesting.com
Sent: Tuesday, September 24, 2013 8:50 PM
Subject: Topband: Beverage antenna terminations
After
carbon, but need to find something
better like carbon film.
- Original Message - From: Tom W8JI w...@w8ji.com
To: Bruce k...@myfairpoint.net; topband@contesting.com
Sent: Tuesday, September 24, 2013 2:55 PM
Subject: Re: Topband: Beverage antenna terminations
What kind of resistors
They were supposed to be non-inductive carbon, but need to find something
better like carbon film.
Any resistor except a big wire wound is non-inductive on a low frequency
like 160.
What you want is a composition type resistor, either metal or carbon, to
handle surges without changing
On 9/24/2013 6:05 PM, Tom W8JI wrote:
They were supposed to be non-inductive carbon, but need to find
something better like carbon film.
Any resistor except a big wire wound is non-inductive on a low
frequency like 160.
What you want is a composition type resistor, either metal or
Thanks for all the termination resistor replies. Will look for Ohmite OX and OY
series resistors.
The resistors I had were supposed to be Carbon composition, but must not have
been. Will discard remaining ones.
Thanks again,
73
Bruce-K1FZ
_
Topband Reflector
Here you go:
www.mouser.com/ProductDetail/Ohmite/OY471KE
I have never lost one of those to a nearby strike.
73, Mike
www.w0btu.com
_
Topband Reflector
: Tuesday, September 24, 2013 10:46 PM
To: Tom W8JI; topband@contesting.com
Subject: Re: Topband: Beverage antenna terminations
They were supposed to be non-inductive carbon, but need to find something
better like carbon film.
- Original Message -
From: Tom W8JI w...@w8ji.com
To: Bruce k
Cut one open and look at it. You can tell right away what they are.
- Original Message -
From: Bruce k...@myfairpoint.net
To: topband@contesting.com
Sent: Wednesday, September 25, 2013 12:40 AM
Subject: Topband: Beverage antenna terminations
Thanks for all the termination resistor
11 matches
Mail list logo