oxidant compound like Penetrox.
Mike N2MS
- Original Message -
From: Tim Shoppa tsho...@gmail.com
To: Paul Christensen w...@arrl.net, topBand List topband@contesting.com
Sent: Wed, 04 Feb 2015 15:31:59 - (UTC)
Subject: Re: Topband: Radial Plate Designs
A different idea than lug
A different idea than lug connections, is to use load-center style ground
bars bolted to the metal plate.
http://www.homedepot.com/p/Square-D-23-Terminal-Load-Center-Ground-Bar-Kit-PK23GTACP/100129430
I fully agree this is not up to Bellcore grounding standards. But seems
much more ham-amenable,
for a
radial system.
Robin
WA6CDR
- Original Message -
From: Gary Smith g...@ka1j.com
To: Topband@contesting.com
Sent: Wednesday, February 04, 2015 10:57
Subject: Re: Topband: Radial Plate Designs
I've never seen the dual hole lugs but they certainly would stop the
attachments from moving
I've long thought about designing a radial plate that addresses some
significant limitations with currently available product. Specially, every
commercially available radial plate uses single-hole lugs to attach a radial
wire to the plate. The problem is that with upwards of 60+ lugs in
A different idea than lug connections, is to use load-center style ground
bars bolted to the metal plate.
http://www.homedepot.com/p/Square-D-23-Terminal-Load-Center-Ground-Bar-Kit-PK23GTACP/100129430
I fully agree this is not up to Bellcore grounding standards. But seems
much more ham-amenable,
, February 04, 2015 10:57
Subject: Re: Topband: Radial Plate Designs
I've never seen the dual hole lugs but they certainly would stop the
attachments from moving. I like the idea.
I made my own radial plate from a 18 x 18 x 3/16 SS plate with a
square hole cut in the center for a butternut
