My opinion: the PCB scare is overblown, just like lead in paint,
asbestos, etc. If you are intelligent about it, taking prudent
precautions, PCB in caps and dummy loads should be fine. I'm sure
hand wringers will weigh in with all kinds of nanny state far fetched
what ifs, but I have PCBs
Here is the direct link to the group. https://groups.io/g/160Digital
Gentlemen..
W0MU
On 2/12/2020 7:18 PM, W0MU Mike Fatchett wrote:
Seems like a good time to plug this list again.
160digi...@groups.io was created for the peaceful discussions of FT/X
and other digital modes and
you ccan try CommScope F660BEF on eBay, les than 0.10/ft
Was recommended here before
73,
Jorge
CX6VM/CW5W
El jue., 13 feb. 2020 a las 21:55, Andreas Junge ()
escribió:
> Mike,
>
> What’s wrong with RG6? Or the DX Engineering version of it:
>
>
>
Or
The RF connection
.56/ foot
$45.00 100 feet
Reconnection.com
(That is 75 ohm Teflon coax)
Roy Morgan
K1LKY Western Mass
> On Feb 13, 2020, at 6:32 PM, W0MU Mike Fatchett wrote:
>
> I am looking for a good source for RG-179 coax to build some RX antennas. I
> tried an Ebay seller and
Mike,
What’s wrong with RG6? Or the DX Engineering version of it:
https://www.dxengineering.com/search/department/cable-and-connectors/product-line/dx-engineering-f6-75-ohm-bulk-coaxial-cable?autoview=SKU=rg6=BestKeywordMatch=Ascending
I am looking for a good source for RG-179 coax to build some RX
antennas. I tried an Ebay seller and got rg58!!
W0MU
_
Searchable Archives: http://www.contesting.com/_topband - Topband Reflector
Do web search for:
The Wireman
Roy Morgan
K1LKY Western Mass
> On Feb 13, 2020, at 6:32 PM, W0MU Mike Fatchett wrote:
>
> I am looking for a good source for RG-179 coax to build some RX antennas. I
> tried an Ebay seller and got rg58!!
>
> W0MU
> _
> Searchable
This is actually an excellent price.
The "usual suspects" like DigiKey and Pasternack
get quite a bit more. The cheapest miniature coax
is RG174 (polyethylene) and even that is not so
cheap, at least at the vendors above.
Rick N6RK
On 2/13/2020 4:21 PM, Roy Morgan wrote:
Or
The RF connection
Mike,
I bought some from ebay and also some connectors.
I made several chokes and some RX switching parts.
I'm out now and don't have access to my PC.
The cable seemed fine.
I'll put the info on here in tomorrow.
Fred KB4QZH
On 2/13/2020 6:31 PM, W0MU Mike Fatchett wrote:
I am looking
I am making some receive antennas and the coax will be for the choke
that goes through a torriod. The cores I have would not take rg6. This
is from the YCCC receive antenna array.
W0MU
On 2/13/2020 5:55 PM, Andreas Junge wrote:
Mike,
What’s wrong with RG6? Or the DX Engineering version of
Thanks for the heads up.
Just worked them on 160 with 100 watts and the inverted L.
S9 here in Nothern NJ.
Paul - W2NMI
- Original Message -
From: Carl Mannle
To: topband@contesting.com
Sent: Wed, 12 Feb 2020 22:19:38 -0500 (EST)
Subject: Topband: Fwd: [QRP-L] HU1DL German DXpedition
11 matches
Mail list logo
