You bet they're nasty and strong! I sure hope you're not trying to
manhandle those critters by yourself?!
Google 'raccoon damage' and click Images at the top. Besides showing how
destructive they can be to property, there's several photos there of people
with their noses either partially or
Hi Neil,
I will follow your guidelines tonight and get up at 02:00 for a couple
of hours.This may do the trick. As the CQWW starts tomorrow night,
this will probably be the last shot. I doubt they will be around on Monday
night and my body will be shot after CQWW even if I do not
I have uploaded a recording of EP6T signal last night at 0254Z. Go to:
www.vo1hp.ca DX Clips page
The signals peaked suddenly around that time and stayed strong until drop out
at their sunrise
Receiver Afedri SDR at remote oceanside site connected to Pixel Magnetic Loop.
The sugnal was
I'm pretty sure I made the Q with EP6T tonight. Some ass was keying
down with others chiding him on the Tx frequency so it was hard to
tell through their BS, sounded like my call coming back. I'll have to
see if it shows up in their log to know for sure.
There were some folks making the Q
Hi Eugene
I heard Toshi very well last year several days long path SSE/SSW around
11:30z. If you have a chance tell him to set some SSE/SSW RX antennas for
NA,
Regards
JC
N4IS
-Original Message-
From: Topband [mailto:topband-boun...@contesting.com] On Behalf Of Eugene
Popov /RA0FF/
Today XW8BM makes a call CQ-NA on 1812 (rx UP2 ) . It was after 22:00 UTC .
Earlier, I wrote it down signal in my archive .
http://www.qsl.net/ra0ff/160m/ears.html
Signal could be heard much better than the last visit to Laos.
Unfortunately, there is not a better RX in XW .
But he said that
I've used similar delay boxes for experimental RX work.
Ordinary toggle switches are used as can be easily seen.
These aren't anything great at RF, but should be fine
at 1.8 MHz. (It is possible that the switches actually
control relays, in which case there is no issue. However,
all the boxes
In my junk box I found two Mathey Video delay line passive control boxes
with BNC connectors which can provide a switchable signal delay of 10 to
350ns. Would these be of any value in phasing two RX antennas and would
they not perform at RF in the same manner that they do at video frequencies?
I han'nt contact with Toshi,
All info from XW8BM and JA8BMK accounts on QRZ.com
XW8BM will start operation on around Jan. 23( Friday) 2015 again on 160m band
if I am lucky
to get the license. I will operate for about 2 weeks. Please visit FaceBook,
