Yes, you have to distinguish between sunrise enhancements and this
so-called midnight peak.
The 17 November 1996 topband posting that I referenced from DJ8WL told of
XZ1N on 1825.5 KHz at 2130 UTC. XZ1N's sunrise would be around 2345 UTC on
Nov 17. That's 2 hrs 15 min before XZ sunrise. So this
K9AY Low Noise Receive antenna system; AS-AYL-4-RX - AYL-4 Controller with
Preamplifier (Control head and Relay box) In execellent condition (purchased
Oct 2008). Used to work first ever JA-VO QSO on 160M Nov 2008.
See Array Solutions for more deatils:
Bob,
Thanks for the feedback on the paint.
I have been using the 3 element HI-Z array
for several years now and although I
understand it is not as robust as the 8
element, it is far better than any Rx
antenna I have used thus far. I got the 8
element because I understand it is even
better
Me too, Bruce. I either work or at least hear and spot the same European
regulars. I've always associated it with European sunrise rather than
something to do with the midnight hour!
73,
Ken - K4XL
On Mon, Sep 19, 2016 at 1:30 PM, K1FZ-Bruce wrote:
>
>
> I often get a
Gary,
The Hi-Z's are said to be great receive ants. Let us know how
yours performs.
I cant offer anything on the preamp enclosure but I can
offer some info on the paint.
I used Krylons Camo spray paint on two verticals and it worked
very well. No RF issues.
Here is the stuff:
Hi Lee,
Thank you for those answers, that's what I
need to do then and I should be good to go
in a couple days after I remove all the
foliage that will be around the elements.
I'm looking forward to working D6 on 160
and know this will ]be a great help.
73,
Gary
KA1J
>
> Hello Gary,
>
Hello Gary,
Spray painting the elements is no problem. As far as mounting the amps to
the elements I would not recommend that. It likely could compromise
performance. It would be much better if you could take a steel post like a
piece of rebar and provide a second place for the amps to
I'm so close to being done with putting
this together. I have all 8 antennas made
@ 23' each the tip section is .5" and the
base is .850" I'm using a 3/4" fiberglass
rod as an insulator
doctorgary.net/Hi-Z-8-Pro-1.jpg
doctorgary.net/Hi-Z-8-Pro-2.jpg
I am having a conundrum with the
Over the years I have seen a few comments with respect to signal peaking
around local midnight. If you search on "midnight signal peaking" in the
topband archives, you should come up with four results. The one from DJ8WL
back in Nov 96 appears to be the only relevant one that I found.
I don't
How about DX Atlas? That works for me.
73, Mike
www.w0btu.com
On Mon, Sep 19, 2016 at 11:25 AM, Richard (Rick) Karlquist <
rich...@karlquist.com> wrote:
> We've all heard about sunrise and sunset peaks.
> Is anyone familiar with what Jan is talking
> about here? I've never noticed anything
>
We've all heard about sunrise and sunset peaks.
Is anyone familiar with what Jan is talking
about here? I've never noticed anything
special re: midnight.
Rick N6RK
On 9/19/2016 7:05 AM, Tree wrote:
QSPing a message from DL7JAN. Please respond to him directly.
*Gesendet:* Sonntag, 18.
QSPing a message from DL7JAN. Please respond to him directly.
*Gesendet:* Sonntag, 18. September 2016 um 21:51 Uhr
*Von:* "Jan Förderer"
*An:* topband@contesting.com
*Betreff:* Software Midnight peaks?
Hey all,
anybody knows a software or small programme out there which
Hi Rag,
the important is to look for carbon composition / ceramic composition
resistors
at 2W power rating at least. The Ohmite has their OY series / 2W for
example.
Mouser:
588-OY-470-E
http://eu.mouser.com/Search/ProductDetail.aspx?qs=K%2fk%252b2unYRtW4en7Bt3IFdQ%3d%3d
Farnell / Newark:
13 matches
Mail list logo