Hi Mark,
The sloping radials you're proposing to use also have the affect
of shortening the effective length of your vertical, just as if
you had raised the feed point.
73
Frank
W3LPL
- Original Message -
From: "Mark K3MSB"
To: "topBand List"
I've been doing some reading on elevated radials for Inverted-L antennas.
The existing literature seems to fall into two types; ground radials where
the feed point is very close the ground, and systems were the feed point
is elevated at the height of the radials.
My Inverted-L is 50 feet high
Gary:
The proper way to get a cable into an equipment box as you're proposing
is to install a conduit gland in the hole first, then feed the cable through
the rubber o-ring in the gland. Here's a link to a photo:
http://tinyurl.com/z2pbynr . Of course, the connectors cannot be put on the
Gary, I would provide a drainage hole at the lowest point of the box. A one
inch diameter hole covered with very fine screen wire. I would glue it in with
silicon-rubber glue. If the box is sealed completely, you will have a buildup
of condensation, been there and had it. I had a prop-pitch
Rather than invent a poorly designed
wheel, maybe someone here has already
successfully worked out a better solution
to waterproofing.
I am using a Sterilite 25" x 18" x 8"
container with secure snap on fasteners on
each side of the lid to house the outdoor
electronics for the 8 circle
Gary,
Sounds like a normal antenna raising day in the woods. Your antenna will
probably work fine now. Don't ask me how I know that...
73, Les W2LK
On 9/25/2016 1:22 AM, Gary Smith wrote:
A little follow-up with my life in the
fast lane...
I move slowly, all considering, kind of
like Ahab