Hi Piotr
Yes, the WF load the tower and if you use the same tower to transmits, like
I do, the voltage can me over 10KV. Also the transformer and resistor
should stand 900 joules or 1 KW for one second, 100 for 10 seconds, you font
want to burn the phasing system, and replaced it any time you
73 material is conductive. The holes are lined with insulation to prevent
the enamel coating on magnet wire from scraping off and shorting to the
core as it is being pulled through the holes.
Also, it is easier to get more turns in a winding using Teflon wire vs.
some other types. The latest
Enamel-insulated magnet wire easily gets knicked going around the sharp
corners of a core. Although the core isn't very ohmically conductive, a
knick at a corner is enough to affect the operation of the transformer.
I think the old Clifton Laboratories page had a little section of
measurements of
Minimize inter-winding capacitance.
73,
Gus Hansen
KB0YH
On 4/28/2017 7:14 AM, P H via Topband wrote:
I've noticed use of teflon tubing in a Flag family transformers.
Apart from low losses: is there another reason to use teflon coated wires?
Regards
Piotr, SP2BPD
_
Topband
I've noticed use of teflon tubing in a Flag family transformers.
Apart from low losses: is there another reason to use teflon coated wires?
Regards
Piotr, SP2BPD
_
Topband Reflector Archives - http://www.contesting.com/_topband
