opband' <topband@contesting.com>
Subject: Re: Topband: Twist a Flag into a Bowtie?
So, is the ground wire just left "floating", JC?No electrical
connection to the antenna itself?
Thanks and 73,
Nick
VE7DXR
At 11:23 13-12-16, JC wrote:
>Hi Nick
>
>The wire will reduc
gt;73's
>JC
>
>N4IS
>
>-Original Message-
>From: Topband [mailto:topband-boun...@contesting.com] On Behalf Of Don
>Kirk
>Sent: Sunday, December 11, 2016 10:13 AM
>To: D Michael <damich...@verizon.net>
>Cc: topband <topband@contesting.com>
>Subject
...@ieee.org]
Sent: Monday, December 12, 2016 10:59 PM
To: JC <n...@comcast.net>
Cc: 'topband' <topband@contesting.com>
Subject: Re: Topband: Twist a Flag into a Bowtie?
What kind of improvement in performance is observed by providing a better
ground, JC? And, where would a ground wire (
: Sunday, December 11, 2016 10:13 AM
To: D Michael <damich...@verizon.net>
Cc: topband <topband@contesting.com>
Subject: Re: Topband: Twist a Flag into a Bowtie?
Hi Mike,
Funny you should ask that.
A few months ago (September) I was looking at building a smaller size DHDL
using 4Nec2, an
[mailto:topband-boun...@contesting.com] On Behalf Of Don Kirk
Sent: Sunday, December 11, 2016 10:13 AM
To: D Michael <damich...@verizon.net>
Cc: topband <topband@contesting.com>
Subject: Re: Topband: Twist a Flag into a Bowtie?
Hi Mike,
Funny you should ask that.
A few months ago (September) I
Mike and Gang,
It was this project (terminated bowtie) that got me looking into the KD9SV
994 x5 preamp a few months ago (I published some info on this preamp a few
months ago). I think the KD9SV 994 x5 preamp sometimes called the KD9SV
VLN preamp (very low noise preamp) would be perfect for use
Hi Mike,
Funny you should ask that.
A few months ago (September) I was looking at building a smaller size DHDL
using 4Nec2, and there were a few things I saw that I thought needed
improvement (I saw things in the full size DHDL that I thought needed
improvement, it was not limited to the small
