Folks on FT-8 use a 2.5 khz ssb wide RX filter.FT-8 is supposed to be
good for 20 db below the noise floor.
I assume that means 20 db below the noise floor of the 2.5 khz RX filter ?
But a 250 hz cw filter would drop the noise floor by 10 db... vs the 2.5 khz
wider filter... if CW mode
Date: Wed, 20 Dec 2017 00:19:45 -0500
From: Nick Maslon - K1NZ
To: topband@contesting.com
Subject: Topband: Niceties
http://www.contesting.com/_topband
Date: Sun, 10 Jun 2018 22:28:11 +0800
From: Jeff Blaine
To: topband@contesting.com
Subject: Re: Topband: cutting coax stubs for 80 meter 4-square
http://www.contesting.com/_topband
Date: Tue, 12 Jun 2018 14:17:43 -0400
From: GEORGE WALLNER
To: David Cutter , David Cutter via Topband
, "'Roger Kennedy'"
Subject: Topband: Baker Island DXpedition on 160
>Hello TopBanders,
>KH1/KH7Z will be active on 160 from Baker Island from June 27 to July 6
>(note that dates are
Date: Mon, 11 Jun 2018 07:29:39 -0700
From: "Richard (Rick) Karlquist"
To: terry burge , topband@contesting.com
Subject: Re: Topband: cutting coax stubs for 80 meter 4-square
On 6/10/2018 8:01 PM, terry burge wrote:
> All's well that ends well I'm happy to report. K2AV, Guy suggested I check
>
Date: Sat, 23 Dec 2017 10:51:57 -0500
From: Brad Denison
To: topband@contesting.com
Subject: Topband: Detuning Relay Flyback Diode
http://w1nt.com>
## I call em back emf diodes.Use a single 1N5408 or 6A10 diode, reverse
connected across the 12 vdc winding. Heres
Date: Tue, 16 Jan 2018 22:41:05 +0800
From: Jeff Blaine
To: topband@contesting.com
Subject: Re: Topband: sdrWEB not going in my log
http://www.contesting.com/_topband
Date: Tue, 16 Jan 2018 08:17:41 -0500
From: "Joe Giacobello, K2XX"
To: a Topband COL
Cc: VE6WZ_Steve , Ron Spencer
, k...@dxer.com
Subject: Topband: Fwd: Re: VU2GSM webSDR use: A Clarification
Date: Wed, 17 Jan 2018 15:07:04 -0500
From:
To: "John Randall" ,
Cc: "MEZEY JIM" , "w1zc" ,
"W2WGK"
Subject: Re: Topband: Kostas' point
Date: Sun, 14 Jan 2018 15:48:04 +
From: Paul Mclaren
To: topband@contesting.com
Subject: Re: Topband: VU2GSM webSDR use
http://www.contesting.com/_topband
Date: Tue, 6 Feb 2018 14:16:15 -0500 (EST)
From: donov...@starpower.net
To: topband
Subject: Topband: FCC authorizes 1KW wireless power transmission
experimental station WJ2XGB on 160 meter band
Date: Mon, 12 Feb 2018 16:35:53 -0500
From: Brian Pease
To: topband@contesting.com
Subject: Re: Topband: FCC authorizes 1KW wireless power transmission
### With only 1 KW ERP, they are not about to put the local power
companies
vast outside plant of poles, HV
Date: Tue, 21 Aug 2018 22:49:49 -0400
From: "Paul Christensen"
To:
Subject: Re: Topband: OT - US Hams, WWV closure
http://www.contesting.com/_topband
Date: Mon, 20 Aug 2018 03:17:57 +
From: Charles Moizeau
To: "k...@radioprism.com" , Topband
Subject: Re: Topband: OT - US Hams, WWV closure
## David does not ..get it. WWV et all is both a Time AND Freq
station.I use the 20 mhz WWV to align the TCXOs in all 4 of my yaesu
Date: Thu, 30 Aug 2018 07:44:04 +0100 (IST)
From: MR TREVOR DUNNE
To: ''topband List'
Subject: Topband: Air Wound Coil
http://www.mfjenterprises.com/Product.php?productid=404-0669
I've had one on order from MFJ via a UK company for 4 months now and no sign of
it, I want to build a at
Date: Wed, 5 Sep 2018 06:13:21 -0400
From: Mark K3MSB
To: Mike Waters
Cc: ad4hk2...@yahoo.com, topband , Tree
Subject: Re: Topband: RE topband Leaving
http://www.contesting.com/_topband
-Original Message-
From: Richard (Rick) Karlquist
Sent: Thursday, August 30, 2018 5:44 PM
To: Guy Olinger K2AV ; Jim Thomson
Cc: TopBand List
Subject: Re: Topband: Air Wound Coil
On 8/30/2018 3:44 PM, Guy Olinger K2AV wrote:
You can also get the edge-wound (flat) 1/4 inch by 1/16
Date: Thu, 12 Jul 2018 22:19:07 -0400
From: GEORGE WALLNER
To: , ha...@tomisat.com
Subject: Topband: KH1/KH7Z TopBand Ops Brief
http://www.contesting.com/_topband
Date: Fri, 13 Jul 2018 10:23:19 +0300
From: uy0zg
To: GEORGE WALLNER
Cc: topband@contesting.com, ha...@tomisat.com
Subject: Re: Topband: KH1/KH7Z TopBand Ops Brief
"> and Ukrainian stations also logged. (Remember, this was in July!)"
>Hi George !
>UY5VA and US4EX - tven in winter and summer
Message-
From: Peter Voelpel
Sent: Friday, March 30, 2018 9:47 AM
To: 'Jim Thomson' ; topband@contesting.com
Subject: RE: Topband: 160M Balun
Why do you want it resonant?
73
Peter
-Original Message-
From: Topband [mailto:topband-boun...@contesting.com] On Behalf Of Jim
Thomson
Date: Fri, 30 Mar 2018 07:22:18 -0400
From: "N2TK, Tony"
To:
Subject: Topband: 160M Balun
http://www.contesting.com/_topband
Date: Sun, 1 Apr 2018 00:23:15 -0400 (EDT)
From: donov...@starpower.net
To: topband@contesting.com
Subject: Re: Topband: 160m polarization and elevation angles
www.arrl.org/news/storm-takes-down-amateur-radio-contest-club-towers-in-northern-europe
## Per the OH8X current website, they still
Date: Sat, 31 Mar 2018 23:15:00 +0800
From: "Steve Ireland"
To:
Subject: Re: Topband: 160m polarisation and elevation angles
http://www.contesting.com/_topband
-Original Message-
From: Richard (Rick) Karlquist
Sent: Friday, August 31, 2018 7:13 AM
To: Jim Thomson ; Guy Olinger K2AV
Cc: TopBand List
Subject: Re: Topband: Air Wound Coil
## What are you using to measure Q ?? I did discover one anomoly with
coils
and Q. XL increases
For you folks that have to de-tune your TX ant, so your dedicated RX ant
works correctly,
if you also operate qsk, how do you do it ? Are you using a sped up vac
relay to de-tune
the TX ant ? I don’t see any other way to accomplish that task. Or do you
use vox cw ?
Jim VE7RF
Date: Fri, 7 Dec 2018 15:05:28 -0500 (EST)
From: donov...@starpower.net
To: topband@contesting.com
Subject: Re: Topband: Rather use N-type (was Re: The answer to PL-259
soldering/reliability problems)
http://www.contesting.com/_topband - Topband Reflector
Date: Sat, 8 Dec 2018 11:57:07 -0800
From: "Richard (Rick) Karlquist"
To: terry burge , j...@johnjeanantiqueradio.com,
topband@contesting.com
http://www.contesting.com/_topband - Topband Reflector
Date: Wed, 21 Nov 2018 09:32:20 -0600
From: "Mike Cizek W0VTT"
To: "'Jean-Paul Albert'" ,
Subject: Re: Topband: ARRL DXCC - 160 Meters
<9. Station Location and Boundary:
http://www.contesting.com/_topband - Topband Reflector
version of the GH-1.
Jim VE7RF
-Original Message-
From: Richard (Rick) Karlquist
Sent: Wednesday, November 28, 2018 7:02 AM
To: jkaufm...@alum.mit.edu ; 'Jim Thomson' ; 'TopBand List'
Subject: Re: Topband: Detuning TX ant + QSK
On 11/28/2018 5:18 AM, John Kaufmann wrote:
Jim,
I use
Date: Wed, 5 Sep 2018 15:27:35 -0500
From: Rob Atkinson
To: topband@contesting.com
Subject: Re: Topband: Radial wire
http://www.contesting.com/_topband
Date: Sun, 16 Sep 2018 17:03:03 + (UTC)
From: N7DF
To: TopBand List
Subject: Topband: alternative to shunt fed tower
http://www.contesting.com/_topband
Date: Tue, 29 Jan 2019 21:12:43 -0400
From: "Mike Smith VE9AA"
To:
Subject: Re: Topband: CQ 160
http://www.contesting.com/_topband - Topband Reflector
Date: Sun, 6 Oct 2019 19:08:17 -0500
From: Rob Atkinson
To: topband@contesting.com
Subject: Re: Topband: spark gap construction ideas for 160m tower
https://www.radioworld.com/tech-and-gear/understanding-arc-gaps-for-am-systems
https://www.thebdr.net/articles/steel/twrs/LimitingStatic.pdf
Coil 3.77 is now available replaces coil 3.72
http://ham-radio.com/k6sti/coil.zip
Jim VE7RF
_
Searchable Archives: http://www.contesting.com/_topband - Topband Reflector
Date: Wed, 18 Dec 2019 23:46:56 +
From: Chuck Hutton
To: "topband@contesting.com"
Subject: Topband: Measuring Common Mode Chokes
https://www.mfjenterprises.com/Product.php?productid=MFJ-854 Switchable In
5 ranges.
Jim VE7RF
_
Searchable Archives:
Date: Tue, 18 Feb 2020 08:04:55 -0800
From: Grant Saviers
To: topband@contesting.com
Subject: Re: Topband: Dacron & varmits
http://synthetictextilesinc.com/supportham.html
https://www.kf7p.com/KF7P/Welcome.html
is one helluva lot stronger than the textile industries version. And
a
Date: Fri, 10 Jan 2020 14:38:03 -0400
From: Herbert Schoenbohm
To: TopBand List ,
topband-ow...@contesting.com
Subject: Topband: FT-8 Contest would be great for Topband
http://www.contesting.com/_topband - Topband Reflector
Date: Wed, 15 Jan 2020 15:58:57 + (UTC)
From: Roger Parsons
To: topband@contesting.com
Subject: Re: Topband: Topband resource
http://www.contesting.com/_topband - Topband Reflector
Date: Thu, 12 Mar 2020 20:25:16 -0700
From: Jim Brown
To: topband@contesting.com
Subject: Re: Topband: Hi Z amplifiers for 160m
http://www.contesting.com/_topband - Topband Reflector
Strength of red thread locker...but the ease of removal, of blue thread
locker.
This may well be the ultimate solution for some applications involving high
vibration.
Made by Permatex.
Date: Tue, 30 Jun 2020 14:12:20 -0500
From: Cecil
To: Mark Lunday
Cc: "topband@contesting.com"
Subject: Re: Topband: Some experiments with a short beverage, not
succeeding very well
http://www.contesting.com/_topband - Topband Reflector
You folks using CW have a HUGE advantage over the SSB operator.
And folks using a remote RX have a bigger advantage over everybody.
And hams, who live on 5-10 acres out in the bushhave a huge advantage
over us mere mortals on postage stamp sized city lots, surrounded by noise in
all
42 matches
Mail list logo