hcanning wrote:
Thanks, I tried it and it worked a treat :) However:
My system is as follows:
Squeezebox Touch Audiolab 8200DQ Meridian 557 power amps (balanced)
I also have an Onkyo AV amp hooked up to an analogue input on the
Audiolab.
With the USB cable attached between
JohnSwenson wrote:
I would do some tests to try and narrow things down. Does the the whine
happen just when music is playing or all the time? Does it happen when
the Touch's power is unplugged? Does unplugging the USB cable from the
Touch make a difference?
I'm thinking it might be a
JohnSwenson wrote:
I'm thinking it might be a ground loop (I was involved in one recently
that went through a USB cable, so it CAN happen).
John S..
It's a ground loop, and you can hear SMPS oscillation breaking through
it
Chris :)
Hello,
EDO ver0.8 USB is working with TEAC UD-501 at 192/24.
I used kernel updater and selected kernel #12
teac corporation teac ud-501 at usb-fsl-ehci.0-1, high speed : usb
audio
playback:
status: running
interface = 1
altset = 1
urbs = 3 [ 6 6 7 ]
packet size = 1024
momentary freq = 192015
I have the same problem... revived an old Touch after awhile not using
it.
Not finding any way to re-enable the status bar at the bottom.
I.e. walking over to the Touch screen there is no way to pause the
music, or any power off button.
Can't find it under settings-screen- anywhere
cotchon wrote:
Hello,
EDO ver0.8 USB is working with TEAC UD-501 at 192/24.
I used kernel updater and selected kernel #12
...
Was using for a while EDO COAX output but never tried USB ...
Thank you so much Triode !
Where can I find the Kernel Updater? I have EDO installed but can't
