Could you try kernel #6 again? I think it is working now with 192k
playback.
--
Triode
Triode's Profile: http://forums.slimdevices.com/member.php?userid=17
View this thread: http://forums.slimdevices.com/showthread.php?t
, and that this might
stop the hub from working properly (it's powered, yes?). I'm not very
technical with this kind of thing, as you might have guessed!
Yep that's another good reason for doing it that way round. Just
wanted to reasure you it worked...
--
Triode
to listening
more...
--
Triode
Triode's Profile: http://forums.slimdevices.com/member.php?userid=17
View this thread: http://forums.slimdevices.com/showthread.php?t=93310
that the Lakewest code will support more data sent
less frequently, but this then causes the buffer fill variation you see
(or at least the bar graph goes up and down a lot). Dominik seemed
happy with the hack though in terms of his code would work with it.
--
Triode
a couple of people test with normal and usb dacs.
[The new applet will automatically install this kernel to make it
simpler for people to install hopefully making it several less steps.
I want to make sure the kernel is ok first though.]
--
Triode
indypants;698778 Wrote:
Just tried kernel#6 with the MDAC and CDQ and I'm not getting anything
from the USB. 192K is working OK from optical and coax though.
Reloaded kernel#5 and everything is working again.
With the hub? It should be the same - I need to look at it again :(
--
Triode
indypants;698597 Wrote:
I used this one http://electronicsshop.dk/?id=1038
Same isolator I have and I think you our ordering the Hama hub - I can
confirm this combination is working for me. As John says, connect the
hub to the player and the isolator between it and the dac.
--
Triode
gh0st;698666 Wrote:
another field report...
setup:
MDAC (latest beta firmware)
SBT with TT3.0
source material 16/44.1 24/96 flac and 320k spotify (thanks Triode,
highly superior to the official plugin :)
results:
Kernel #1: works fine provided the buffer in TT3.0 is set to 5000. I
been some debate on
pink fish about whether they are needed - but some people have reported
improvements.
--
Triode
Triode's Profile: http://forums.slimdevices.com/member.php?userid=17
View this thread: http
is considered harmful
:)). It will mean you need to run 7.8 builds though.
--
Triode
Triode's Profile: http://forums.slimdevices.com/member.php?userid=17
View this thread: http://forums.slimdevices.com/showthread.php?t=93310
Triode;697101 Wrote:
I've tested again, 176/192 is broken on the internal dac (wrong speed),
but I believe works on the spdif output [which is what I was testing
with mostly and was my real target for this]. Please constrain testing
to the spdif output at present.
Looks like 176/192
TT does when it bypasses the plug
layer). In the case of SB internal devices they don't support 32k (or
don't look to have been configured for it), but some usb dacs may.
--
Triode
Triode's Profile: http
on the spdif output [which is what I was testing
with mostly and was my real target for this]. Please constrain testing
to the spdif output at present.
--
Triode
Triode's Profile: http://forums.slimdevices.com/member.php
then there is a good chance it
should work with kernels 3 onwards on SB Touch. Windows does not
include uac 2 drivers, but as long as the dac works with the native
driver for linux then there is a good chance it will work (can't
promise though)
--
Triode
MWelschenbach;696722 Wrote:
Triode, what exactly do you mean by reset the output device?
Go into the usb dac menu and set the output device back to default.
--
Triode
Triode's Profile: http://forums.slimdevices.com
ste1;696725 Wrote:
Hi Triode,
I have tried this with a Musical Fidelity V-Dac 2. This is an asynch
dac however I do not know if it is USB 1 or 2.
http://www.musicalfidelity.com/products/V-Series/V-PSU/v-psu.asp
I followed the instructions on page 1 of this thread last night and
both
menu for the dac?
--
Triode
Triode's Profile: http://forums.slimdevices.com/member.php?userid=17
View this thread: http://forums.slimdevices.com/showthread.php?t=93310
___
Touch
speed hub though as the touch has some hardware limitations - can
you try to use one and see?
--
Triode
Triode's Profile: http://forums.slimdevices.com/member.php?userid=17
View this thread: http://forums.slimdevices.com
alters the frequency by
100Hz or more between the go faster and go slower message. Your dac
appears do adjust on a more fine grain manner. However the bit that
matters is that it is updating.
--
Triode
Triode's Profile
back on the internal dac. So this is a
definate possiblity at present]
--
Triode
Triode's Profile: http://forums.slimdevices.com/member.php?userid=17
View this thread: http://forums.slimdevices.com/showthread.php?t
the stream. I
need to find a way to put back resampling on the server for this case.
(note 3) note by playing through the output separately, support of
sampling rates below 44.1 is removed, this may impact some internet
radio streams.
--
Triode
the request from the dac
and always using a more frequent interval to poll for frequency. I
will look at next weekend and try to do 1) as it seems more general -
please look out for an update.
--
Triode
Triode's Profile
(i.e. one
at a time).
--
Triode
Triode's Profile: http://forums.slimdevices.com/member.php?userid=17
View this thread: http://forums.slimdevices.com/showthread.php?t=93310
reboot
when you updated this? (otherwise it was possibly not valid json?)
Try setting the alsaPlaybackDevice=hw:CARD=DAC and alsaSampleSize=24
for your dac.
The plugin should do this automatically - but lets find our what your
dac needs first.
--
Triode
Likely that it needs a more specific card name - can you try aplay -l
from the command line and see what it lists as the options for devices?
--
Triode
Triode's Profile: http://forums.slimdevices.com/member.php?userid=17
are you using - try with kernel 4 + the manual
modifications.
--
Triode
Triode's Profile: http://forums.slimdevices.com/member.php?userid=17
View this thread: http://forums.slimdevices.com/showthread.php?t=93310
it wrong there - can you narrow down
which hardware params don't work?
--
Triode
Triode's Profile: http://forums.slimdevices.com/member.php?userid=17
View this thread: http://forums.slimdevices.com/showthread.php?t=93310
:824: cannot submit syncpipe for urb 2, error -27:
internal error
Do you get the same with kernel 1 or 2?
--
Triode
Triode's Profile: http://forums.slimdevices.com/member.php?userid=17
View this thread: http
jackocleebrown;696409 Wrote:
lsusb -v on my laptop returns:
Thanks - will look at this and get back to you.
--
Triode
Triode's Profile: http://forums.slimdevices.com/member.php?userid=17
View this thread: http
here.
--
Triode
Triode's Profile: http://forums.slimdevices.com/member.php?userid=17
View this thread: http://forums.slimdevices.com/showthread.php?t=93310
___
Touch mailing list
indicate async is working correctly.
--
Triode
Triode's Profile: http://forums.slimdevices.com/member.php?userid=17
View this thread: http://forums.slimdevices.com/showthread.php?t=93310
Mark - could you post the dmesg for when the audio stream is started?
(I'm not sure I enabled debug on that kernel, but would be useful to
see what it records). Do you know if the dac only supports S32_LE
format over uac 2?
--
Triode
the
binary to support S32_LE and let you have it to validate.
--
Triode
Triode's Profile: http://forums.slimdevices.com/member.php?userid=17
View this thread: http://forums.slimdevices.com/showthread.php?t=93310
RadBadMark;695955 Wrote:
Triode - thanks for the effort from you and John with this!
I have a couple of DACs that are class 2 capable - I'll try and give it
a test either tonight or over the weekend. Is there anything specific
that I can feedback that would be particularly useful? Are you
MWelschenbach;695327 Wrote:
Is someone here who tried the kernels provided by Triode with Eximus
DP1, or with any other USB audio class 2 dac?
I don't think anyone has posted about tests using an audio class 2 dac
yet - I'm awaiting with interest. [I was also holding off doing any
more
full speed port then that will work, but I suspect
this is not the case. In summary - I'm hopeful we can make it work,
but at present with no test cases can't be sure.
--
Triode
Triode's Profile: http://forums.slimdevices.com
trialing it with a high speed
device.
--
Triode
Triode's Profile: http://forums.slimdevices.com/member.php?userid=17
View this thread: http://forums.slimdevices.com/showthread.php?t=93310
have one install with an
option to support the no hub case at 44/48k for dacs which work with
it.
--
Triode
Triode's Profile: http://forums.slimdevices.com/member.php?userid=17
View this thread: http://forums.slimdevices.com
gaunaik;695027 Wrote:
M-DAC and Kernal *3 seems to work with 96/24 without the use of a hub.
This has already been reported by another tester.
Good news indeed or is is the MDAC being fooled into thinking this is
the case? Music plays flawlessly.
Thanks for your efforts Triode and John
DP 777.
Did you do any of these tests using the SBT USB output (as discussed on
this thread). If so can you confirm so we can record which dacs are
working. Very interested if any of these dacs are usb audio class 2.
--
Triode
(this is where any errors will be shown)
--
Triode
Triode's Profile: http://forums.slimdevices.com/member.php?userid=17
View this thread: http://forums.slimdevices.com/showthread.php?t=93310
realmadrid;693809 Wrote:
Hi Triode:
Look at:
http://www.qnktc.com/ab_11/
Works very well on Vortexbox
Regards
Juan
So if you have one - could you try it on Touch with my kernel and let
me know how you get on? I'm not looking to buy one, I was hoping
people here would have usb
, but if it works then I don't see any
reason for needing a hub as long as you only want to go to 48k.
--
Triode
Triode's Profile: http://forums.slimdevices.com/member.php?userid=17
View this thread: http://forums.slimdevices.com
debug.
--
Triode
Triode's Profile: http://forums.slimdevices.com/member.php?userid=17
View this thread: http://forums.slimdevices.com/showthread.php?t=93310
___
Touch mailing list
at this point.
John - the EMU-0404 code is definately there. Could you try with
kernel #4, this is the same code but with a couple of extra printks
added in the relavent quirk section and with the
CONFIG_SND_VERBOSE_PRINTK kernel option. What's the dmesg say?
--
Triode
something.
--
Triode
Triode's Profile: http://forums.slimdevices.com/member.php?userid=17
View this thread: http://forums.slimdevices.com/showthread.php?t=82110
___
Touch mailing list
? (Ideally
also try the new #3 kernel with the dac too so I know it supports these
dacs)
--
Triode
Triode's Profile: http://forums.slimdevices.com/member.php?userid=17
View this thread: http://forums.slimdevices.com
, but I've included what looked to be the
relavent patches]
As with kernel #2, if you have an async usb 1 device then you will need
an external hub.
Very interested in test results.
--
Triode
Triode's Profile: http
MWelschenbach;692575 Wrote:
Is it possible to install the new kernel over kernel #2?
Yes - just go to the Kernel Updater menu and select the new one.
--
Triode
Triode's Profile: http://forums.slimdevices.com/member.php
not a
consitent view across other cases.
--
Triode
Triode's Profile: http://forums.slimdevices.com/member.php?userid=17
View this thread: http://forums.slimdevices.com/showthread.php?t=93583
avoids getting to the low power state could
be expected to have an impact which may be positive... (or maybe not)
However I did reason it could have an impact one way or another.
Clearly in a perfect world it would have no impact.
--
Triode
cases of A and D. I would say from the existing data they do not. The
inference from this would be that cpu load does not have a significant
bearing on the audio quality, but I wonder whether now you know the
test cases whether people are able to hear any difference
--
Triode
some
interest in taking the test!
I should not have used the letters A B in two places... When Test
Case A and Test Case B are presented they are randomly chosen from
the four options [which are labled A, B, C, D but they do not
correspond]
--
Triode
overnight too? It definately won't support
this...
--
Triode
Triode's Profile: http://forums.slimdevices.com/member.php?userid=17
View this thread: http://forums.slimdevices.com/showthread.php?t=93310
, but a better approach would be to be
able to open the audio device when a new dac is detected. This is not
possible at present.
--
Triode
Triode's Profile: http://forums.slimdevices.com/member.php?userid=17
View
also possible to do it
with the toolbox installed?
Should be able to do the tests with it installed or not, though clearly
anything turning off the screen will impact the ability to run the
tests...
--
Triode
Triode's
with kernel #2 and the default kernel is the need for an
external hub to may async work as the silicon inside touch appears to
have a limitation which the hub fixes.
[I would like to get the 2 changes in kernel #2 into the standard
firmware, but am awaiting feedback from logitech]
--
Triode
if any
more results for test 2 show any significant results.
--
Triode
Triode's Profile: http://forums.slimdevices.com/member.php?userid=17
View this thread: http://forums.slimdevices.com/showthread.php?t=93583
.
Maybe a test of kernel #1 without hub vs kernel #2 with hub, but if the
hub works then this is the case where the dac is working as intended.
--
Triode
Triode's Profile: http://forums.slimdevices.com/member.php?userid=17
View
behause it won't stir after a
couple of hours in standby mode?
I've not experienced this - was the touch still connected to the server
in this case? (Standby mode really only means a different display
screen, so it would normally look the same from the server perspective)
--
Triode
- i.e. high speed. I don't think the
current kernels will support that. If it can be forced to operate as a
usb 1 dac then I suspect it will work. Otherwise it will probably need
some more kernel updates.
--
Triode
Triode's
available at present are unlikely to work.
--
Triode
Triode's Profile: http://forums.slimdevices.com/member.php?userid=17
View this thread: http://forums.slimdevices.com/showthread.php?t=93310
touch to some extend - you will still get the same bits
out of the output.
--
Triode
Triode's Profile: http://forums.slimdevices.com/member.php?userid=17
View this thread: http://forums.slimdevices.com/showthread.php?t=93583
can detect the
difference with buffer and priority tuning as its trying to
validate/dispel a theory related to this.)
--
Triode
Triode's Profile: http://forums.slimdevices.com/member.php?userid=17
View this thread: http
.
And as far as jitter - the theory with async usb is that the clock is
generated in the dac. As JohnW would say first order impact of jitter
is removed, but there's still scope for 2nd order things to mean
noise/RF couples from the SBT to the dac. You could try a usb
issolator to reduce this.
--
Triode
TheOctavist;690553 Wrote:
0 0 0
No supprise for that...
0, -1, 1, 0
Interesting - if you repeat the test do you reenforce the score? (i.e.
if you do it a second time or select the option to run more tests do the
same ones come out as preferred?)
--
Triode
the device with settings which work - else you get
the problem you have seen.
--
Triode
Triode's Profile: http://forums.slimdevices.com/member.php?userid=17
View this thread: http://forums.slimdevices.com/showthread.php?t=93310
Mnyb;690419 Wrote:
Play music of you own choice, if I understand triode here he have
changed something in the sound system settings in the Touch what it is
you are not suposed to know just try with whatever music you please :)
Exactly - you should play whatever music you like and see if you
to try now.
Note - you are probably likely to need an external high speed hub which
will cost 10 GBP. (See explination on experiment thread)
--
Triode
Triode's Profile: http://forums.slimdevices.com/member.php?userid=17
in a specific order.
--
Triode
Triode's Profile: http://forums.slimdevices.com/member.php?userid=17
View this thread: http://forums.slimdevices.com/showthread.php?t=93583
spollock;689998 Wrote:
Using the triode Spotify plugin, is there a way to make use of Library
Artists and Albums? They are all empty.
Thanks,
Steve
The library feature only shows what you store to the library from the
context menus (its not the same library which spotify use which
, glitches, and remote host resetting the
connection.
it's working perfectly for me.
If you use the Radio 3 menu in the BBC Radio applet or BBCiPlayer
plugin it should use this url anyway if you have aac streams selected.
This should give you 320k with live text.
--
Triode
(most 24 bit USB DACs, 3 bytes)
BTW the streamer II works fine with the normal kernel, just install the
USB Audio applet.
John S.
I've updated the Usb Audio Output applet to hopefully parse these
values and set the right bitdepth for 16 bit dacs. Please try and
report back.
--
Triode
at the mercy of the congestion at the spotify
end. I don't see any sign of spotify stopping support for hardware
players as it always generates revenue for them.
--
Triode
Triode's Profile: http://forums.slimdevices.com
the default
kernel. Its likely with dacs that don't also use HID that the default
kernel will work in place of kernel #2, they will get a divide by 0
backtrace in dmesg but I suspect they will work. Other dacs need one
of the other changes I've make for kernel #2
--
Triode
FredNowak;688699 Wrote:
I installed Kernal #2 and thought I would see what would happen without
a hub. It is so good I have not bothered to hook up a hub. I have not
heard any clicks or pops and will post again if they start.
Many thanks, Triode. I must also thank John Swenson for getting
size and output device name then reboot?
The USB Audio Applet is responsble for setting this - if you can find
the right things to parse out of /proc/asound/ to get the settings then
I will uptdate.
--
Triode
Triode's
but they are so far apart you don't
notice... If you had a hub in the way then I would expect the
momentary frequency to update.
--
Triode
Triode's Profile: http://forums.slimdevices.com/member.php?userid=17
View
. Interested in others trying.
Note the hub must be a high speed USB 2.0 hub. (So the very cheapest
ones around which are 1.1 are no good, but there are lots of cheap high
speed usb 2.0 ones around)
--
Triode
Triode's Profile
to Dominik of Lakewest for suggesting the hub approach.
Please test and post here if these work better for you
--
Triode
Triode's Profile: http://forums.slimdevices.com/member.php?userid=17
View this thread: http
to the instructions to hopefully make this clearer, but it would
be good to understand what you saw in more detail..
--
Triode
Triode's Profile: http://forums.slimdevices.com/member.php?userid=17
View this thread: http
via the Kernel Updater applet.
--
Triode
Triode's Profile: http://forums.slimdevices.com/member.php?userid=17
View this thread: http://forums.slimdevices.com/showthread.php?t=93310
JohnSwenson;674869 Wrote:
I have a little bit of news, Triode from these forums is now looking
into the issues as well, he's looking into the inner workings of the
low level USB driver which is where the issues seem to be coming from.
Say tuned this may eventually get resolved.
John S
, plugin tab at the bottom of the
page. Note also that the url text is compressed by this forum it
should be:
Code:
http://triodeapplets.googlecode.com/svn/trunk/usbtestrepo.xml
--
Triode
reports first though.
--
Triode
Triode's Profile: http://forums.slimdevices.com/member.php?userid=17
View this thread: http://forums.slimdevices.com/showthread.php?t=93310
of the nominal frequency.
--
Triode
Triode's Profile: http://forums.slimdevices.com/member.php?userid=17
View this thread: http://forums.slimdevices.com/showthread.php?t=93310
___
Touch
for the
last few lines while it is playing?
--
Triode
Triode's Profile: http://forums.slimdevices.com/member.php?userid=17
View this thread: http://forums.slimdevices.com/showthread.php?t=93310
That doesn't look right - could you capture the entire dmesg and post
here or mail to me?
--
Triode
Triode's Profile: http://forums.slimdevices.com/member.php?userid=17
View this thread: http://forums.slimdevices.com
/trunk/squeezeos/src/imx35/
--
Triode
Triode's Profile: http://forums.slimdevices.com/member.php?userid=17
View this thread: http://forums.slimdevices.com/showthread.php?t=82110
about getting one and looking at
the touch code. How frequent are the dropouts at present?
[John did you ever just build the image with a newer alsa - I was
thinking this may work for a usb only case?]
--
Triode
Triode's
several
years ago on classic) then it would be easier.
--
Triode
Triode's Profile: http://forums.slimdevices.com/member.php?userid=17
View this thread: http://forums.slimdevices.com/showthread.php?t=80402
for this?
--
Triode
Triode's Profile: http://forums.slimdevices.com/member.php?userid=17
View this thread: http://forums.slimdevices.com/showthread.php?t=79050
___
Touch mailing list
it, but would be
pleased for any feedback)
--
Triode
Triode's Profile: http://forums.slimdevices.com/member.php?userid=17
View this thread: http://forums.slimdevices.com/showthread.php?t=77505
recommending applets
they see as recommended... Any takers?
--
Triode
Triode's Profile: http://forums.slimdevices.com/member.php?userid=17
View this thread: http://forums.slimdevices.com/showthread.php?t=77505
scp and sftp are different - use scp as this should be available.
--
Triode
Triode's Profile: http://forums.slimdevices.com/member.php?userid=17
View this thread: http://forums.slimdevices.com/showthread.php?t=77491
scp and sftp are different - use scp as this should be available.
--
Triode
Triode's Profile: http://forums.slimdevices.com/member.php?userid=17
View this thread: http://forums.slimdevices.com/showthread.php?t=77491
low power cpu at the server end, the
current method is always going to be an approximation. I hope it does
provide some useful information though...
--
Triode
Triode's Profile: http://forums.slimdevices.com/member.php
how to
dump down the interface on this to make it less geeky. If it didn't
have any options but just showed a single display of how fast it could
go - similar to a broadband speed checker, would this be useful? Is
the history graph currently shown also useful?
--
Triode
now.
--
Triode
Triode's Profile: http://forums.slimdevices.com/member.php?userid=17
View this thread: http://forums.slimdevices.com/showthread.php?t=77349
___
Touch mailing list
301 - 399 of 399 matches
Mail list logo