Frankly I didn't remember this bug :) it's a machine in not using much
anymore but I think at some point the problem stopped happening.
--
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to xorg in Ubuntu.
https://bugs.launchpad.net
I solved this issue by
1) Not connecting to the internet while it installs
2) Not take any third party software in the process
other than that I followed the regular installation process, whipping my disk.
Took a lot of time for me to get the process working, but as far I can
understand most of
Public bug reported:
My pc is over temperature and the fun is going too fast. I have ASUS
Zenbook flip S UX270UA
ProblemType: Bug
DistroRelease: Ubuntu 20.04
Package: xorg (not installed)
Uname: Linux 4.20.0-042000-generic x86_64
ApportVersion: 2.20.11-0ubuntu27.6
Architecture: amd64
CasperMD5Che
Hi! Since this bugs continues to happen on my computer, I wonder if
there's anything I can do to confirm it and give you more information
about it...
--
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to pulseaudio in Ubuntu.
https:
Outputs of pacmd list-sinks before and after suspend:
=== before
==
2 sink(s) available.
* index: 0
name:
driver:
flags: HARDWARE DECIBEL_VOLUME LATENCY DYNAMIC_LATENCY
state: IDLE
Public bug reported:
Hi!
After a suspend/resume cycle with HDMI plugged in, it seems that
pulseaudio doesn't recognize anymore the internal analog device
(speakers/headphones) and I hear no sound. Before suspend I see two
audio sinks through "pacmd list-sinks" (internal analog and HDMI), and
afte
I have experienced this since a few days as well. For me, this also
seems to cause not being able to logout or switch users. I hope a fix
will be found soon.
--
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to dbus in Ubuntu.
http
Well, you could even enable ping capabilities by unpriviledged users
with the ICMP socket type:
# sysctl -w net.ipv4.ping_group_range='0 65536'
$ strace -esocket ping 127.0.0.1
socket(AF_INET, SOCK_DGRAM, IPPROTO_ICMP) = 3
Regards,
On Mon, Aug 6, 2018 at 10:30 PM Launchpad Bug Tracker
<1302...@bu
Upgrading libmm-glib0 1.6.8-2ubuntu1 to libmm-glib0 1.7.990-1ubuntu1
makes mobile broadband not working as well.
--
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to modemmanager in Ubuntu.
https://bugs.launchpad.net/bugs/106
Public bug reported:
modemmanager 1.7.990-1ubuntu1 not working in Cosmic. Need to downgrade
to modemmanager 1.6.8-2ubuntu1 to have mobile broadband working again.
** Affects: modemmanager (Ubuntu)
Importance: Undecided
Status: New
--
You received this bug notification because you
Public bug reported:
I was doing some tests with curl and libcurl and needed to change the ciphers
list.
I tried different ciphers as in the following example:
curl -v --ciphers AES256-SHA256 https://test.com
No matter what, ECDHE_RSA_AES_256_GCM_SHA384 was always used.
ProblemType: Bug
Distro
Same bug for me: /etc/resolv.conf was pointing to
/run/NetworkManager/resolv.conf rather than
../run/resolvconf/resolv.conf, as fixed by dpkg-reconfigure resolvconf.
Bug also confirmed by a bunch of other people: see
https://askubuntu.com/questions/966870/dns-not-working-after-
upgrade-17-04-to-17
I'm having this problem on a machine that doesn't have dbus-user-session
installed, nor it ever had it installed.
The problem started to appear after installing Google Chrome (although
it was quite fresh: I hadn't use it for anything else, apart from
opening Firefox to download Chrome).
Note: it
Public bug reported:
It seems that unsetting the environment variable TZ there is a huge
performance penalty calling some glibc functions, eg. time()
this has been documented here:
https://blog.packagecloud.io/eng/2017/02/21/set-environment-variable-
save-thousands-of-system-calls/
and I can co
Public bug reported:
On an Ubuntu Core system is impossible to delete an user from the
extrausers db:
root@localhost:/# userdel --extrausers alice
userdel: unrecognized option '--extrausers'
** Affects: shadow (Ubuntu)
Importance: Undecided
Status: New
--
You received this bug no
Le lundi 24 octobre 2016 03:20:40 EDT, vous avez écrit :
> taglib 1.11.1 has just be released, and fixes an ABI breakage, cf.
> https://bugs.debian.org/839767 I plan on uploading it in sid this week
Done last night, so you should be good to go!
--
You received this bug notification because you a
*** This bug is a duplicate of bug 1546373 ***
https://bugs.launchpad.net/bugs/1546373
** This bug has been marked a duplicate of bug 1546373
Please update to 1.11
--
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to taglib
taglib 1.11.1 has just be released, and fixes an ABI breakage, cf.
https://bugs.debian.org/839767
I plan on uploading it in sid this week, and I would recommend that you wait
for this version to sync in Ubuntu.
(And indeed, qmmp 1.1 should not have been packaged without taglib >=
1.10. qmmp 1.1.
Public bug reported:
When I'm at home and I turn on my own WiFi home network, I can connect
to it from my BQ Aquaris E5 without any problem. Sadly, I noticed that
when the phone darkens for a while and I turn on back the screen, the
WiFi connection has been lost. In order to restore the connection
Confirmed also for BQ Aquaris E5.
--
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to webbrowser-app in Ubuntu.
https://bugs.launchpad.net/bugs/1506723
Title:
Initial downward scroll using touchpad is too fast
Status in Oxide:
Nearby GPS positioning has got many problems. It is a very slow process
at phone start-up and it doesn't work very well in my opinion. I'm in
Italy, in Rome, and before to find the exact location, it takes always
at least 4/5 attempts: it's frustrating. My phone is a BQ Aquaris E5. I
have to tell a
I'm using a Toshiba laptop with a Qualcomm Atheros AR8152 network card
and the bug affects me too. It also happens if the connection is lost
abruptly or WiFi is turned off
--
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to networ
Public bug reported:
Sometimes the mouse pointer becomes invisible for a while; then -- and I
don't understand what triggers that -- it reappears. The mouse continues
working -- mouseover and clicking works, so the only problem is that the
pointer is invisible.
Happy to give you more details to h
: 2.20.1-0ubuntu2.1
Architecture: amd64
AudioDevicesInUse:
USERPID ACCESS COMMAND
/dev/snd/pcmC2D0c: matteo11398 F...m pulseaudio
/dev/snd/controlC2: matteo11398 F pulseaudio
/dev/snd/controlC0: matteo11398 F pulseaudio
/dev/snd/controlC1: matteo11398 F
This bug also affects my Toshiba Satellite C645 with a Qualcomm Atheros
WiFi card and happens even if the connection is lost abruptly, like when
there is a power outage and both the modem and the router shut down.
--
You received this bug notification because you are a member of Ubuntu
Touch seed
Nonny Moose I have the same problem of you (running Ubuntu Mate and gdb
v.7.11.1).
Actually I can't perform any application in debug due to the same segmentation
fault!
Did you solve the problem?
Thanks
Matteo
--
You received this bug notification because you are a member of Ubuntu
This also happens with newly downloaded files in Ubuntu 16.04
--
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to libunity in Ubuntu.
https://bugs.launchpad.net/bugs/1506744
Title:
Newly installed applications do not show in th
I'm seeing the same behavior on 16.04's evince.
--
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to ibus in Ubuntu.
https://bugs.launchpad.net/bugs/1421483
Title:
All keyboard input fails: "IBUS-WARNING **: Events queue growing
> Can you see if this solves the issue on your computers?
No luck here (Xubuntu 14.04), what actually did fix the issue was
installing the latest stable release of lightdm-gtk-indicator from the
upstream ppa. This caused a few hiccups with the Greybird theme, but at
least the ghost sessions are go
FYI, it's done... GLEW 1.13.0 is building right now on Debian's buildd
infrastructure.
Have a look at:
https://buildd.debian.org/status/package.php?p=glew
Cheers.
--
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to glew in Ub
I'm working on testing GLEW 1.13.0 against its 63 reverse dependencies
right now and I really hope to be able to upload it to Debian
unstable/sid within the end of this month. So probably Ubuntu 16.04
should ship 1.13.0 ;-)
--
You received this bug notification because you are a member of Ubuntu
It looks like that nobody is actually issuing the indicator-services-end
upstart signal, so the stop events of *all* indicators for lightdm
sessions never get fired. The other indicators just die because the
session bus disappears under their feet, but indicator-sound-service
keeps hanging around (
same here:
$ ll
/var/lib/apt/lists/partial/it.archive.ubuntu.com_ubuntu_dists_vivid-updates_universe_binary-amd64_Packages.bz2
-rw-r--r-- 1 root root 95G apr 25 14:37
/var/lib/apt/lists/partial/it.archive.ubuntu.com_ubuntu_dists_vivid-updates_universe_binary-amd64_Packages.bz2
--
You received
Actually I had to disable PA like this:
chmod -x /usr/bin/pulseaudio ; pkill pulse
--
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to pulseaudio in Ubuntu.
https://bugs.launchpad.net/bugs/1443202
Title:
applications hangs whi
Public bug reported:
Any application (plasma, mplayer, vlc, avidemux, etc) hangs when playing the
first sound.
Here is a strace log
lstat("/run", {st_mode=S_IFDIR|0755, st_size=800, ...}) = 0
lstat("/run/user", {st_mode=S_IFDIR|0755, st_size=100, ...}) = 0
lstat("/run/user/1000", {st_mode=S_IFDI
stemd-tmpfiles-setup.service
mar 23 16:20:25 matteo-adb-notebook systemd[1]: Starting Create Volatile Files
and Directories...
mar 23 16:20:25 matteo-adb-notebook systemd-tmpfiles[689]:
[/usr/lib/tmpfiles.d/var.conf:14] Duplicate line for path "/var/log", ignoring.
mar 23 16:20:26 matt
Public bug reported:
Service systemd-tmpfiles-setup.service fails to start because there are
two duplicate lines in /usr/lib/tmpfiles.d:
[/usr/lib/tmpfiles.d]# grep -r '^d /var/log ' *
00rsyslog.conf:d /var/log 0775 root syslog -
var.conf:d /var/log 0755 - - -
[/usr/lib/tmpfiles.d]# systemctl st
See also https://communities.vmware.com/thread/485583
--
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to xorg in Ubuntu.
https://bugs.launchpad.net/bugs/1314780
Title:
Full screen between xorg and VMWare-Workstation
Status in
I can confirm the same bug on WMWare Workstation 11 and Ubuntu 14.10.
--
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to xorg in Ubuntu.
https://bugs.launchpad.net/bugs/1314780
Title:
Full screen between xorg and VMWare-Workst
Reassigning to sysvinit to keep it in sync with the upstream issue.
Also, it makes more sense given that changes should happen in files shipped by
sysvinit-utils and sysv-rc.
** Package changed: systemd-shim (Debian) => sysvinit (Debian)
** Package changed: systemd-shim (Ubuntu) => sysvinit (Ubu
Public bug reported:
(forwarded from the relevant bug report raised in Debian BTS and adapted
for upstart as PID1)
Daemons which are not spawned via an upstart job (eg. those with
initscripts, ifupdown hooks and similar) are not detached from the
current logind session cgroups. This causes the se
I can confirm that software-properties 0.92.37.2 fixes the original
issue on trusty, leaving "verification-needed" as-is since I performed
only limited testing for the issue at hand.
--
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribe
@Tom:
I can just report that the package is in a "worksforme" status as far as the
issue is concerned, I'm in no way affiliated with Canonical or the SRU Team :-)
If at least another user could verify it and comment on the issue (per
https://wiki.ubuntu.com/QATeam/PerformingSRUVerification ) thin
As far as software-properties is concerned, the issue is being tracked
in lp:1350291 (perhaps this issue should be marked as a duplicate of
that one for software-properties and Invalid for ubuntu-cloud-archive).
The updated package is in trusty-proposed and I can confirm it works, it
only needs ve
Right now, the only way of getting Juno on 14.04 is by using the old
manual method (eg. install ubuntu-cloud-keyring and create a listfile in
/etc/apt/sources.list.d).
I'd wait for the greenlight from Canonical, though: the last upload
happened two days ago, so the archive might still not be ready
Public bug reported:
Internal speaker of my asus n750JK laptop doesn't work. Just the rear
speaker is working
** Affects: alsa-driver (Ubuntu)
Importance: Undecided
Status: New
** Description changed:
- Internal speaker of my asus n750JK laptot doesn't work
+ Internal speaker of m
same happens with 3.15.0 on Ubuntu 14.04 64 bit
Jul 11 12:43:41 localhost kernel: [42049.462542] [drm] stuck on render ring
Jul 11 12:43:41 localhost kernel: [42049.463330] [drm] GPU HANG: ecode
0:0x00ff, in chrome [2172], reason: Ring hung, action: reset
Jul 11 12:43:41 localhost kernel: [42
47 matches
Mail list logo
