[Touch-packages] [Bug 1694600] [NEW] package whoopsie 0.2.52.3 failed to install/upgrade: package is in a very bad inconsistent state; you should reinstall it before attempting configuration
Public bug reported: I ran "sudo apt-get install -f" on my terminal and selected "y" on prompt. After that, I got the following logs: (Reading database ... 305447 files and directories currently installed.) Preparing to unpack .../libwhoopsie0_0.2.52.3_amd64.deb ... Unpacking libwhoopsie0:amd64 (0.2.52.3) over (0.2.52.2) ... Processing triggers for libc-bin (2.23-0ubuntu7) ... Setting up libwhoopsie0:amd64 (0.2.52.3) ... dpkg: error processing package whoopsie (--configure): package is in a very bad inconsistent state; you should reinstall it before attempting configuration Processing triggers for libc-bin (2.23-0ubuntu7) ... Errors were encountered while processing: whoopsie E: Sub-process /usr/bin/dpkg returned an error code (1) ProblemType: Package DistroRelease: Ubuntu 16.04 Package: whoopsie 0.2.52.3 ProcVersionSignature: Ubuntu 4.4.0-78.99-generic 4.4.62 Uname: Linux 4.4.0-78-generic x86_64 ApportVersion: 2.20.1-0ubuntu2.5 AptOrdering: libwhoopsie0: Install libwhoopsie0: Configure whoopsie: Configure NULL: ConfigurePending Architecture: amd64 CrashReports: 640:1000:116:38189263:2017-05-30 11:10:06.496968406 +0530:2017-05-30 11:10:07.008974568 +0530:/var/crash/_usr_share_nylas-mail_nylas.1000.crash 640:1000:116:75985:2017-05-31 10:59:36.494395912 +0530:2017-05-31 10:59:36.710448121 +0530:/var/crash/_usr_bin_update-manager.1000.crash 600:0:116:416287:2017-05-31 11:00:14.342133998 +0530:2017-05-31 11:00:15.342133998 +0530:/var/crash/whoopsie.0.crash 640:1000:116:54173:2017-05-30 11:10:08.964998106 +0530:2017-05-30 11:10:09.201000946 +0530:/var/crash/_usr_share_apport_apport-gtk.1000.crash Date: Wed May 31 11:00:14 2017 DuplicateSignature: package:whoopsie:0.2.52.3 Setting up libwhoopsie0:amd64 (0.2.52.3) ... dpkg: error processing package whoopsie (--configure): package is in a very bad inconsistent state; you should ErrorMessage: package is in a very bad inconsistent state; you should reinstall it before attempting configuration InstallationDate: Installed on 2017-01-21 (129 days ago) InstallationMedia: Ubuntu 16.04.1 LTS "Xenial Xerus" - Release amd64 (20160719) RelatedPackageVersions: apport-noui N/A SourcePackage: whoopsie Title: package whoopsie 0.2.52.3 failed to install/upgrade: package is in a very bad inconsistent state; you should reinstall it before attempting configuration UpgradeStatus: No upgrade log present (probably fresh install) ** Affects: whoopsie (Ubuntu) Importance: Undecided Status: New ** Tags: amd64 apport-package autoreport-false need-duplicate-check xenial -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to whoopsie in Ubuntu. https://bugs.launchpad.net/bugs/1694600 Title: package whoopsie 0.2.52.3 failed to install/upgrade: package is in a very bad inconsistent state; you should reinstall it before attempting configuration Status in whoopsie package in Ubuntu: New Bug description: I ran "sudo apt-get install -f" on my terminal and selected "y" on prompt. After that, I got the following logs: (Reading database ... 305447 files and directories currently installed.) Preparing to unpack .../libwhoopsie0_0.2.52.3_amd64.deb ... Unpacking libwhoopsie0:amd64 (0.2.52.3) over (0.2.52.2) ... Processing triggers for libc-bin (2.23-0ubuntu7) ... Setting up libwhoopsie0:amd64 (0.2.52.3) ... dpkg: error processing package whoopsie (--configure): package is in a very bad inconsistent state; you should reinstall it before attempting configuration Processing triggers for libc-bin (2.23-0ubuntu7) ... Errors were encountered while processing: whoopsie E: Sub-process /usr/bin/dpkg returned an error code (1) ProblemType: Package DistroRelease: Ubuntu 16.04 Package: whoopsie 0.2.52.3 ProcVersionSignature: Ubuntu 4.4.0-78.99-generic 4.4.62 Uname: Linux 4.4.0-78-generic x86_64 ApportVersion: 2.20.1-0ubuntu2.5 AptOrdering: libwhoopsie0: Install libwhoopsie0: Configure whoopsie: Configure NULL: ConfigurePending Architecture: amd64 CrashReports: 640:1000:116:38189263:2017-05-30 11:10:06.496968406 +0530:2017-05-30 11:10:07.008974568 +0530:/var/crash/_usr_share_nylas-mail_nylas.1000.crash 640:1000:116:75985:2017-05-31 10:59:36.494395912 +0530:2017-05-31 10:59:36.710448121 +0530:/var/crash/_usr_bin_update-manager.1000.crash 600:0:116:416287:2017-05-31 11:00:14.342133998 +0530:2017-05-31 11:00:15.342133998 +0530:/var/crash/whoopsie.0.crash 640:1000:116:54173:2017-05-30 11:10:08.964998106 +0530:2017-05-30 11:10:09.201000946 +0530:/var/crash/_usr_share_apport_apport-gtk.1000.crash Date: Wed May 31 11:00:14 2017 DuplicateSignature: package:whoopsie:0.2.52.3 Setting up libwhoopsie0:amd64 (0.2.52.3) ... dpkg: error processing package whoopsie (--configure): package is in a very bad inconsistent state; you should ErrorMessage: package is in a very bad inconsistent state; you should
[Touch-packages] [Bug 1694595] [NEW] Bug with graphic carts
Public bug reported: no driver with graphic carts ProblemType: Bug DistroRelease: Ubuntu 16.04 Package: xorg 1:7.7+13ubuntu3 ProcVersionSignature: Ubuntu 4.4.0-78.99-generic 4.4.62 Uname: Linux 4.4.0-78-generic i686 .tmp.unity_support_test.1: ApportVersion: 2.20.1-0ubuntu2.6 Architecture: i386 CompizPlugins: No value set for `/apps/compiz-1/general/screen0/options/active_plugins' CompositorRunning: compiz CompositorUnredirectDriverBlacklist: '(nouveau|Intel).*Mesa 8.0' CompositorUnredirectFSW: true Date: Wed May 31 07:15:49 2017 DistUpgraded: Fresh install DistroCodename: xenial DistroVariant: ubuntu ExtraDebuggingInterest: Yes, if not too technical GraphicsCard: Advanced Micro Devices, Inc. [AMD/ATI] Cedar [Radeon HD 5000/6000/7350/8350 Series] [1002:68f9] (prog-if 00 [VGA controller]) Subsystem: ASUSTeK Computer Inc. Radeon HD 5450 [1043:0386] InstallationDate: Installed on 2017-05-21 (9 days ago) InstallationMedia: Ubuntu 16.04 LTS "Xenial Xerus" - Release i386 (20160420.1) MachineType: System manufacturer System Product Name ProcEnviron: LANGUAGE=fr_FR PATH=(custom, no user) LANG=fr_FR.UTF-8 SHELL=/bin/bash ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-4.4.0-78-generic root=UUID=58213a0b-ae70-4cbf-92f9-7f61e83b1926 ro nomodeset nopat plymouth:debug vesafb.invalid=1 drm.debug=0xe Renderer: Software SourcePackage: xorg UpgradeStatus: No upgrade log present (probably fresh install) dmi.bios.date: 09/11/2009 dmi.bios.vendor: American Megatrends Inc. dmi.bios.version: 0602 dmi.board.asset.tag: To Be Filled By O.E.M. dmi.board.name: P5KPL-AM SE dmi.board.vendor: ASUSTeK Computer INC. dmi.board.version: X.0x dmi.chassis.asset.tag: Asset-1234567890 dmi.chassis.type: 3 dmi.chassis.vendor: Chassis Manufacture dmi.chassis.version: Chassis Version dmi.modalias: dmi:bvnAmericanMegatrendsInc.:bvr0602:bd09/11/2009:svnSystemmanufacturer:pnSystemProductName:pvrSystemVersion:rvnASUSTeKComputerINC.:rnP5KPL-AMSE:rvrX.0x:cvnChassisManufacture:ct3:cvrChassisVersion: dmi.product.name: System Product Name dmi.product.version: System Version dmi.sys.vendor: System manufacturer version.compiz: compiz 1:0.9.12.2+16.04.20160823-0ubuntu1 version.libdrm2: libdrm2 2.4.80-0~x~padoka0 version.libgl1-mesa-dri: libgl1-mesa-dri 1:17.1.1-1~x~padoka0 version.libgl1-mesa-dri-experimental: libgl1-mesa-dri-experimental N/A version.libgl1-mesa-glx: libgl1-mesa-glx 1:17.1.1-1~x~padoka0 version.xserver-xorg-core: xserver-xorg-core 2:1.18.4-0ubuntu0.2 version.xserver-xorg-input-evdev: xserver-xorg-input-evdev 1:2.10.1-1ubuntu2 version.xserver-xorg-video-ati: xserver-xorg-video-ati 1:7.7.0-1 version.xserver-xorg-video-intel: xserver-xorg-video-intel 2:2.99.917+git20160325-1ubuntu1.2 version.xserver-xorg-video-nouveau: xserver-xorg-video-nouveau 1:1.0.12-1build2 xserver.bootTime: Wed May 31 06:51:42 2017 xserver.configfile: default xserver.devices: inputPower Button KEYBOARD, id 6 inputPower Button KEYBOARD, id 7 inputLITEON Technology USB Keyboard KEYBOARD, id 8 inputLITEON Technology USB Keyboard KEYBOARD, id 9 inputLogitech Optical USB Mouse MOUSE, id 10 xserver.logfile: /var/log/Xorg.0.log xserver.version: 2:1.18.4-0ubuntu0.2 ** Affects: xorg (Ubuntu) Importance: Undecided Status: New ** Tags: apport-bug compiz-0.9 i386 third-party-packages ubuntu xenial -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to xorg in Ubuntu. https://bugs.launchpad.net/bugs/1694595 Title: Bug with graphic carts Status in xorg package in Ubuntu: New Bug description: no driver with graphic carts ProblemType: Bug DistroRelease: Ubuntu 16.04 Package: xorg 1:7.7+13ubuntu3 ProcVersionSignature: Ubuntu 4.4.0-78.99-generic 4.4.62 Uname: Linux 4.4.0-78-generic i686 .tmp.unity_support_test.1: ApportVersion: 2.20.1-0ubuntu2.6 Architecture: i386 CompizPlugins: No value set for `/apps/compiz-1/general/screen0/options/active_plugins' CompositorRunning: compiz CompositorUnredirectDriverBlacklist: '(nouveau|Intel).*Mesa 8.0' CompositorUnredirectFSW: true Date: Wed May 31 07:15:49 2017 DistUpgraded: Fresh install DistroCodename: xenial DistroVariant: ubuntu ExtraDebuggingInterest: Yes, if not too technical GraphicsCard: Advanced Micro Devices, Inc. [AMD/ATI] Cedar [Radeon HD 5000/6000/7350/8350 Series] [1002:68f9] (prog-if 00 [VGA controller]) Subsystem: ASUSTeK Computer Inc. Radeon HD 5450 [1043:0386] InstallationDate: Installed on 2017-05-21 (9 days ago) InstallationMedia: Ubuntu 16.04 LTS "Xenial Xerus" - Release i386 (20160420.1) MachineType: System manufacturer System Product Name ProcEnviron: LANGUAGE=fr_FR PATH=(custom, no user) LANG=fr_FR.UTF-8 SHELL=/bin/bash ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-4.4.0-78-generic root=UUID=58213a0b-ae70-4cbf-92f9-7f61e83b1926 ro nomodeset nopat plymouth:debug vesafb.invalid=1 drm.debug=0xe
[Touch-packages] [Bug 1694587] [NEW] package libsamplerate0:i386 0.1.8-8 failed to install/upgrade: Paket libsamplerate0:i386 ist nicht bereit zur Konfiguration kann nicht konfiguriert werden (moment
Public bug reported: i try to install Gimp via Terminal. Doesnt work ProblemType: Package DistroRelease: Ubuntu 16.04 Package: libsamplerate0:i386 0.1.8-8 ProcVersionSignature: Ubuntu 4.8.0-53.56~16.04.1-generic 4.8.17 Uname: Linux 4.8.0-53-generic x86_64 NonfreeKernelModules: wl ApportVersion: 2.20.1-0ubuntu2.6 Architecture: amd64 Date: Wed May 31 06:12:20 2017 Dependencies: gcc-6-base 6.0.1-0ubuntu1 libc6 2.23-0ubuntu7 libgcc1 1:6.0.1-0ubuntu1 multiarch-support 2.23-0ubuntu7 ErrorMessage: Paket libsamplerate0:i386 ist nicht bereit zur Konfiguration kann nicht konfiguriert werden (momentaner Status »half-installed«) InstallationDate: Installed on 2017-05-25 (5 days ago) InstallationMedia: Ubuntu 16.04.2 LTS "Xenial Xerus" - Release amd64 (20170215.2) PackageArchitecture: i386 RelatedPackageVersions: dpkg 1.18.4ubuntu1.2 apt 1.2.20 SourcePackage: libsamplerate Title: package libsamplerate0:i386 0.1.8-8 failed to install/upgrade: Paket libsamplerate0:i386 ist nicht bereit zur Konfiguration kann nicht konfiguriert werden (momentaner Status »half-installed«) UpgradeStatus: No upgrade log present (probably fresh install) ** Affects: libsamplerate (Ubuntu) Importance: Undecided Status: New ** Tags: apport-package i386 xenial -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to libsamplerate in Ubuntu. https://bugs.launchpad.net/bugs/1694587 Title: package libsamplerate0:i386 0.1.8-8 failed to install/upgrade: Paket libsamplerate0:i386 ist nicht bereit zur Konfiguration kann nicht konfiguriert werden (momentaner Status »half-installed«) Status in libsamplerate package in Ubuntu: New Bug description: i try to install Gimp via Terminal. Doesnt work ProblemType: Package DistroRelease: Ubuntu 16.04 Package: libsamplerate0:i386 0.1.8-8 ProcVersionSignature: Ubuntu 4.8.0-53.56~16.04.1-generic 4.8.17 Uname: Linux 4.8.0-53-generic x86_64 NonfreeKernelModules: wl ApportVersion: 2.20.1-0ubuntu2.6 Architecture: amd64 Date: Wed May 31 06:12:20 2017 Dependencies: gcc-6-base 6.0.1-0ubuntu1 libc6 2.23-0ubuntu7 libgcc1 1:6.0.1-0ubuntu1 multiarch-support 2.23-0ubuntu7 ErrorMessage: Paket libsamplerate0:i386 ist nicht bereit zur Konfiguration kann nicht konfiguriert werden (momentaner Status »half-installed«) InstallationDate: Installed on 2017-05-25 (5 days ago) InstallationMedia: Ubuntu 16.04.2 LTS "Xenial Xerus" - Release amd64 (20170215.2) PackageArchitecture: i386 RelatedPackageVersions: dpkg 1.18.4ubuntu1.2 apt 1.2.20 SourcePackage: libsamplerate Title: package libsamplerate0:i386 0.1.8-8 failed to install/upgrade: Paket libsamplerate0:i386 ist nicht bereit zur Konfiguration kann nicht konfiguriert werden (momentaner Status »half-installed«) UpgradeStatus: No upgrade log present (probably fresh install) To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/libsamplerate/+bug/1694587/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1693756] Re: [Xenial][ DW5816e] to support qmi over mbim which needed for FCC authentication.
** Description changed: # issue: - * wwan card DW5816e[413c:81cc] couldn't be recognized by modemmanager 1.4.12-1ubuntu1 on xenial. - - but works well on on Yakkety. + * wwan card DW5816e[413c:81cc] couldn't be recognized by modemmanager 1.4.12-1ubuntu1 on xenial. + - but works well on on Yakkety. # investgation: - * in failed case, mmcli -L shows nothing on Xenial with DW5816. Then tried install followed packages from Yakkety ppa on Xenial and wwan card works on 1st boot but failed after 2nd boot sometimes. - - libmbim-glib4_1.14.0-1_amd64.deb - - libmbim-glib-dev_1.14.0-1_amd64.deb - - libmbim-proxy_1.14.0-1_amd64.deb - - libmbim-utils_1.14.0-1_amd64.deb - - libqmi-glib5_1.16.0-1_amd64.deb - - libqmi-proxy_1.16.0-1_amd64.deb + * in failed case, mmcli -L shows nothing on Xenial with DW5816. Then tried install followed packages from Yakkety ppa on Xenial and wwan card works on 1st boot but failed after 2nd boot sometimes. + - libmbim-glib4_1.14.0-1_amd64.deb + - libmbim-glib-dev_1.14.0-1_amd64.deb + - libmbim-proxy_1.14.0-1_amd64.deb + - libmbim-utils_1.14.0-1_amd64.deb + - libqmi-glib5_1.16.0-1_amd64.deb + - libqmi-proxy_1.16.0-1_amd64.deb - * different from ModemManager --debug -- In passed case, it received message from /dev/cdc-wdm1 after send "Read max control message size from descriptors file: 4096" , but not happens to failed case. So, it prints "[mm-port-probe.c:261] mm_port_probe_set_result_qcdm(): (tty/ttyS4) port is not QCDM-capable" in failed case. - - passed case: http://paste.ubuntu.com/24664908/ - - failed case: http://paste.ubuntu.com/24664910/ + * different from ModemManager --debug + - In passed case, it received message from /dev/cdc-wdm1 after send "Read max control message size from descriptors file: 4096" , but not happens to failed case. So, it prints "[mm-port-probe.c:261] mm_port_probe_set_result_qcdm(): (tty/ttyS4) port is not QCDM-capable" in failed case. + - passed case: http://paste.ubuntu.com/24664908/ + - failed case: http://paste.ubuntu.com/24664910/ # Plan: - * let the newer version packages could also works well on Xenial. - * find out needed patches on newer version packages. - * packport needed patches to older version packages on Xenial. + * let the newer version packages could also works well on Xenial. + * find out needed patches on newer version packages. + * packport needed patches to older version packages on Xenial. # environment information: - * modinfo cdc_mbim for original kernel module: http://paste.ubuntu.com/24662359/ - - the code /driver/net/usb/cdc_mbim.c is the same between xenial kernel 4.4.0 and yakkety kernel 4.8.0. + * modinfo cdc_mbim for original kernel module: http://paste.ubuntu.com/24662359/ + - the code /driver/net/usb/cdc_mbim.c is the same between xenial kernel 4.4.0 and yakkety kernel 4.8.0. - * uname -r: 4.4.0-73-generic + * uname -r: 4.4.0-73-generic - * lsusb -v: http://paste.ubuntu.com/24662332/ + * lsusb -v: http://paste.ubuntu.com/24662332/ + + FCC authentication reference: + * http://lists.infradead.org/pipermail/lede-dev/2016-August/002332.html + * https://lists.freedesktop.org/archives/libmbim-devel/2016-April/thread.html#704 -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to modemmanager in Ubuntu. https://bugs.launchpad.net/bugs/1693756 Title: [Xenial][ DW5816e] to support qmi over mbim which needed for FCC authentication. Status in modemmanager package in Ubuntu: New Bug description: # issue: * wwan card DW5816e[413c:81cc] couldn't be recognized by modemmanager 1.4.12-1ubuntu1 on xenial. - but works well on on Yakkety. # investgation: * in failed case, mmcli -L shows nothing on Xenial with DW5816. Then tried install followed packages from Yakkety ppa on Xenial and wwan card works on 1st boot but failed after 2nd boot sometimes. - libmbim-glib4_1.14.0-1_amd64.deb - libmbim-glib-dev_1.14.0-1_amd64.deb - libmbim-proxy_1.14.0-1_amd64.deb - libmbim-utils_1.14.0-1_amd64.deb - libqmi-glib5_1.16.0-1_amd64.deb - libqmi-proxy_1.16.0-1_amd64.deb * different from ModemManager --debug - In passed case, it received message from /dev/cdc-wdm1 after send "Read max control message size from descriptors file: 4096" , but not happens to failed case. So, it prints "[mm-port-probe.c:261] mm_port_probe_set_result_qcdm(): (tty/ttyS4) port is not QCDM-capable" in failed case. - passed case: http://paste.ubuntu.com/24664908/ - failed case: http://paste.ubuntu.com/24664910/ # Plan: * let the newer version packages could also works well on Xenial. * find out needed patches on newer version packages. * packport needed patches to older version packages on Xenial. # environment information: * modinfo cdc_mbim for original kernel module:
[Touch-packages] [Bug 1585084] Re: Volume notification keeps popping up constantly (the notify-OSD bubble on top-right corner)
OK, thanks for testing that. The bug is then Fix Released for current Ubuntu. As soon as we know /what/ fixed it, we can start thinking about getting that fix into 16.04 too. ** Changed in: pulseaudio (Ubuntu) Status: Incomplete => Fix Released -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to pulseaudio in Ubuntu. https://bugs.launchpad.net/bugs/1585084 Title: Volume notification keeps popping up constantly (the notify-OSD bubble on top-right corner) Status in pulseaudio package in Ubuntu: Fix Released Bug description: I upgraded to Ubuntu 16.04 yesterday, I did a clean install while preserving the home directory which is mounted in a separate partition. Even during the installation I had constant volume notification bubble appearing on the top-right corner of my screen, it would come and go about twice every minute. I just thought it was due to installing hardware drivers or something but the problem persisted even when I booted into the freshly installed system. I did some searching and two users reported the exact problem. And one more suggested this happens because constant disconnect and reconnect of the sound card which makes sense as the sound settings flashes briefly during every popup. Someone on IRC suggested to kill pulseaudio and thus restart it, that does not fix the issue. I also tried the Live environment thinking it might be due to some old config files in home partition (which was preserved during upgrade), but this problem happens in the live environment as well, which makes sense because it was present during installation as well. Users with the same issue: http://ubuntuforums.org/showthread.php?t=2323815 http://askubuntu.com/questions/773008/constant-volume-osd-in-16-04 http://askubuntu.com/questions/767466/sound-card-being-disconnected-reconnected-constantly Thanks. ProblemType: Bug DistroRelease: Ubuntu 16.04 Package: pulseaudio 1:8.0-0ubuntu3 ProcVersionSignature: Ubuntu 4.4.0-22.40-generic 4.4.8 Uname: Linux 4.4.0-22-generic x86_64 ApportVersion: 2.20.1-0ubuntu2 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC2: sidd 1651 F pulseaudio /dev/snd/controlC0: sidd 1651 F pulseaudio /dev/snd/controlC1: sidd 1651 F pulseaudio CurrentDesktop: Unity Date: Tue May 24 12:31:12 2016 InstallationDate: Installed on 2016-05-23 (0 days ago) InstallationMedia: Ubuntu 16.04 LTS "Xenial Xerus" - Release amd64 (20160420.1) SourcePackage: pulseaudio UpgradeStatus: No upgrade log present (probably fresh install) dmi.bios.date: 08/23/2011 dmi.bios.vendor: American Megatrends Inc. dmi.bios.version: 0705 dmi.board.asset.tag: To be filled by O.E.M. dmi.board.name: M5A97 EVO dmi.board.vendor: ASUSTeK Computer INC. dmi.board.version: Rev 1.xx dmi.chassis.asset.tag: To Be Filled By O.E.M. dmi.chassis.type: 3 dmi.chassis.vendor: To Be Filled By O.E.M. dmi.chassis.version: To Be Filled By O.E.M. dmi.modalias: dmi:bvnAmericanMegatrendsInc.:bvr0705:bd08/23/2011:svnTobefilledbyO.E.M.:pnTobefilledbyO.E.M.:pvrTobefilledbyO.E.M.:rvnASUSTeKComputerINC.:rnM5A97EVO:rvrRev1.xx:cvnToBeFilledByO.E.M.:ct3:cvrToBeFilledByO.E.M.: dmi.product.name: To be filled by O.E.M. dmi.product.version: To be filled by O.E.M. dmi.sys.vendor: To be filled by O.E.M. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/pulseaudio/+bug/1585084/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1546603] Re: Bluetooth mouse connects but doesn't work ("Unable to register GATT service")
Thanks. Sounds like it should be fixed by: http://www.bluez.org/release-of-bluez-5-42/ which means the fix entered Ubuntu in 17.04. -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to bluez in Ubuntu. https://bugs.launchpad.net/bugs/1546603 Title: Bluetooth mouse connects but doesn't work ("Unable to register GATT service") Status in bluez package in Ubuntu: Incomplete Bug description: I have a bluetooth mouse that I can get to connect via the gnome bluetooth settings panel, but even after it's connected it doesn't move the pointer or register any clicks. the following shows up in the journal : $ $ journalctl -b 0 |grep bluetooth Feb 17 07:18:22 spiny bluetoothd[1009]: Bluetooth daemon 5.36 Feb 17 07:18:22 spiny bluetoothd[1009]: Starting SDP server Feb 17 07:18:22 spiny bluetoothd[1009]: Bluetooth management interface 1.10 initialized Feb 17 07:18:22 spiny bluetoothd[1009]: Failed to obtain handles for "Service Changed" characteristic Feb 17 07:18:22 spiny bluetoothd[1009]: Not enough free handles to register service Feb 17 07:18:22 spiny bluetoothd[1009]: Error adding Link Loss service Feb 17 07:18:22 spiny bluetoothd[1009]: Not enough free handles to register service Feb 17 07:18:22 spiny bluetoothd[1009]: Not enough free handles to register service Feb 17 07:18:22 spiny bluetoothd[1009]: Not enough free handles to register service Feb 17 07:18:22 spiny bluetoothd[1009]: Current Time Service could not be registered Feb 17 07:18:22 spiny bluetoothd[1009]: gatt-time-server: Input/output error (5) Feb 17 07:18:22 spiny bluetoothd[1009]: Not enough free handles to register service Feb 17 07:18:22 spiny bluetoothd[1009]: Not enough free handles to register service Feb 17 07:18:22 spiny bluetoothd[1009]: Sap driver initialization failed. Feb 17 07:18:22 spiny bluetoothd[1009]: sap-server: Operation not permitted (1) Feb 17 07:18:22 spiny NetworkManager[1062]: Loaded device plugin: NMBluezManager (/usr/lib/x86_64-linux-gnu/NetworkManager/libnm-device-plugin-bluetooth.so) Feb 17 07:18:24 spiny bluetoothd[1009]: Endpoint registered: sender=:1.42 path=/MediaEndpoint/A2DPSource Feb 17 07:18:24 spiny bluetoothd[1009]: Endpoint registered: sender=:1.42 path=/MediaEndpoint/A2DPSink Feb 17 07:18:42 spiny bluetoothd[1009]: Endpoint registered: sender=:1.71 path=/MediaEndpoint/A2DPSource Feb 17 07:18:42 spiny bluetoothd[1009]: Endpoint registered: sender=:1.71 path=/MediaEndpoint/A2DPSink Feb 17 07:18:42 spiny bluetoothd[1009]: RFCOMM server failed for Headset Voice gateway: rfcomm_bind: Address already in use (98) Feb 17 07:18:52 spiny gnome-bluetooth-panel.desktop[2717]: ** (gnome-control-center.real:2717): WARNING **: Ignoring launcher gufw (missing desktop file) Feb 17 07:18:52 spiny gnome-bluetooth-panel.desktop[2717]: ** (gnome-control-center.real:2717): WARNING **: Ignoring launcher landscape-client-settings (missing desktop file) Feb 17 07:18:52 spiny gnome-bluetooth-panel.desktop[2717]: ** (gnome-control-center.real:2717): WARNING **: Ignoring launcher language-selector (missing desktop file) Feb 17 07:18:52 spiny gnome-bluetooth-panel.desktop[2717]: ** (gnome-control-center.real:2717): WARNING **: Ignoring launcher ubuntuone-installer (missing desktop file) Feb 17 07:19:00 spiny gnome-bluetooth-panel.desktop[2717]: (gnome-control-center.real:2717): GLib-CRITICAL **: g_ascii_strdown: assertion 'str != NULL' failed Feb 17 07:19:01 spiny bluetoothd[1009]: No cache for F2:3F:5C:A1:F9:F7 Feb 17 07:19:06 spiny bluetoothd[1009]: Unable to register GATT service with handle 0x000c for device F2:3F:5C:A1:F9:F7 Feb 17 07:19:06 spiny bluetoothd[1009]: Unable to register GATT service with handle 0x001b for device F2:3F:5C:A1:F9:F7 Feb 17 07:19:06 spiny bluetoothd[1009]: Unable to register GATT service with handle 0x003f for device F2:3F:5C:A1:F9:F7 Feb 17 07:19:06 spiny bluetoothd[1009]: Report Map read failed: Attribute requires authentication before read/write Feb 17 07:19:06 spiny bluetoothd[1009]: Protocol Mode characteristic read failed: Attribute requires authentication before read/write Feb 17 07:19:06 spiny bluetoothd[1009]: HID Information read failed: Attribute requires authentication before read/write Feb 17 07:19:06 spiny bluetoothd[1009]: Read Report Reference descriptor failed: Attribute requires authentication before read/write Feb 17 07:19:06 spiny bluetoothd[1009]: Read Report Reference descriptor failed: Attribute requires authentication before read/write Feb 17 07:19:06 spiny bluetoothd[1009]: Read Report Reference descriptor failed: Attribute requires authentication before read/write Feb 17 07:19:06 spiny bluetoothd[1009]: Read Report Reference descriptor failed: Attribute requires authentication before read/write Feb 17 07:19:08 spiny gnome-bluetooth-panel.desktop[2717]:
[Touch-packages] [Bug 1674258] Re: lscpu crashs when /dev/mem is not stable to read
This bug was fixed in the package util-linux - 2.29-1ubuntu3 --- util-linux (2.29-1ubuntu3) artful; urgency=medium * Cherrypick upstream fix to prevent lscpu crash on arm64 by accessing DMI in sysfs instead of /dev/mem. LP: #1674258 -- Ike PanhcThu, 18 May 2017 10:49:34 +0800 ** Changed in: util-linux (Ubuntu) Status: In Progress => Fix Released -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to util-linux in Ubuntu. https://bugs.launchpad.net/bugs/1674258 Title: lscpu crashs when /dev/mem is not stable to read Status in util-linux package in Ubuntu: Fix Released Status in util-linux source package in Xenial: In Progress Status in util-linux source package in Yakkety: In Progress Status in util-linux source package in Zesty: In Progress Bug description: [Impact] * Read from /dev/mem and scan DMI tables is dangerous, if /dev/mem is not stable to read, it will cause lscpu crash. [Test Case] * `sudo lscpu` shall not cause Segmentation fault (core dumped) [Regression Potential] * Reading from DMI tables is sysfs is more stable then reading from /dev/mem and if DMI tables is not available lscpu will use the old way to search in /dev/mem. I believe its low regression risk To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/util-linux/+bug/1674258/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1693900] Re: apt-get update should return exit code != 0 on error
Well, it's more like "this site is temporarily unavailable, please try again at a later time." -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to apt in Ubuntu. https://bugs.launchpad.net/bugs/1693900 Title: apt-get update should return exit code != 0 on error Status in apt package in Ubuntu: Triaged Bug description: When running 'apt-get update' (e.g. on a container install post- install script), apt-get return with exit code 0, even so it wasn't able to "update" properly. E.g.: + apt-get update Err:1 http://de.archive.ubuntu.com/ubuntu xenial InRelease Temporary failure resolving 'de.archive.ubuntu.com' Err:2 http://security.ubuntu.com/ubuntu xenial-security InRelease Temporary failure resolving 'security.ubuntu.com' Err:3 http://de.archive.ubuntu.com/ubuntu xenial-updates InRelease Temporary failure resolving 'de.archive.ubuntu.com' Reading package lists... Done W: Failed to fetch http://de.archive.ubuntu.com/ubuntu/dists/xenial/InRelease Temporary failure resolving 'de.archive.ubuntu.com' W: Failed to fetch http://de.archive.ubuntu.com/ubuntu/dists/xenial-updates/InRelease Temporary failure resolving 'de.archive.ubuntu.com' W: Failed to fetch http://security.ubuntu.com/ubuntu/dists/xenial-security/InRelease Temporary failure resolving 'security.ubuntu.com' W: Some index files failed to download. They have been ignored, or old ones used instead. It should be corrected to return useful exit code, so that scripts can take the appropriate actions ... To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/apt/+bug/1693900/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1659846] Re: /usr/bin/sudo:6:kill:main
And in fact this is covered by bug 1565332. -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to sudo in Ubuntu. https://bugs.launchpad.net/bugs/1659846 Title: /usr/bin/sudo:6:kill:main Status in sudo package in Ubuntu: New Bug description: The Ubuntu Error Tracker has been receiving reports about a problem regarding sudo. This problem was most recently seen with package version 1.8.19p1-1ubuntu1, the problem page at https://errors.ubuntu.com/problem/a4dd7ca4d793ba224f7d7369ba21e84fe667efd1 contains more details, including versions of packages affected, stacktrace or traceback, and individual crash reports. If you do not have access to the Ubuntu Error Tracker you can request it at http://forms.canonical.com/reports/. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/sudo/+bug/1659846/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1659846] Re: /usr/bin/sudo:6:kill:main
This is a false positive in sudo. What's happening is that sudo is taking an error from the program it executed and propagating out to the calling shell. Thus when a called application aborts (i.e. SIGABRT), it also triggers an abort for sudo. To demonstrate: $ sudo sh -c 'echo $$' results in the following in /var/crash: $ ls -l /var/crash/ total 164 -rw-r- 1 root whoopsie 29122 May 30 15:32 _bin_dash.0.crash -rw-r- 1 root whoopsie 133096 May 30 15:32 _usr_bin_sudo.0.crash -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to sudo in Ubuntu. https://bugs.launchpad.net/bugs/1659846 Title: /usr/bin/sudo:6:kill:main Status in sudo package in Ubuntu: New Bug description: The Ubuntu Error Tracker has been receiving reports about a problem regarding sudo. This problem was most recently seen with package version 1.8.19p1-1ubuntu1, the problem page at https://errors.ubuntu.com/problem/a4dd7ca4d793ba224f7d7369ba21e84fe667efd1 contains more details, including versions of packages affected, stacktrace or traceback, and individual crash reports. If you do not have access to the Ubuntu Error Tracker you can request it at http://forms.canonical.com/reports/. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/sudo/+bug/1659846/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1659846] Re: /usr/bin/sudo:6:kill:main
Durr, wrong copy-pasta, the actual command is: $ sudo sh -c 'kill -ABRT $$' -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to sudo in Ubuntu. https://bugs.launchpad.net/bugs/1659846 Title: /usr/bin/sudo:6:kill:main Status in sudo package in Ubuntu: New Bug description: The Ubuntu Error Tracker has been receiving reports about a problem regarding sudo. This problem was most recently seen with package version 1.8.19p1-1ubuntu1, the problem page at https://errors.ubuntu.com/problem/a4dd7ca4d793ba224f7d7369ba21e84fe667efd1 contains more details, including versions of packages affected, stacktrace or traceback, and individual crash reports. If you do not have access to the Ubuntu Error Tracker you can request it at http://forms.canonical.com/reports/. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/sudo/+bug/1659846/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1694367] Re: Screen tearing in 16.10 onwards
** Changed in: mesa Status: Unknown => Confirmed ** Changed in: mesa Importance: Unknown => Medium -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to mesa in Ubuntu. https://bugs.launchpad.net/bugs/1694367 Title: Screen tearing in 16.10 onwards Status in Mesa: Confirmed Status in kernel-package package in Ubuntu: New Status in mesa package in Ubuntu: New Bug description: In 16.10 onwards my laptop has always shown screen tearing globally, additionally GL applications will not v-sync despite attempting to, they appear to sync slightly off from the [integrated] display. This occurs with kernels 4.8 to 4.11 and mesa 12 to 17, so not entirely sure if it's a bug with either or a default miss- configuration in ubuntu... ubuntu-bug also appears to be broken... To manage notifications about this bug go to: https://bugs.launchpad.net/mesa/+bug/1694367/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
Re: [Touch-packages] [Bug 1565772] Re: [SRU] Allow plugins to decide which username to set on new accounts
Hello, Hans! I am sorry for not being more helpful, but I really do not have anything more to say than: If you think, it is covered, it is covered. If you think, it is all duplicates, then it will be the case, I trust. HG, PvdL -- Philipp von der Linden, M.A. OsloerStr.93 D-13359 Wedding eMail: "PvdL"On 30.05.2017 21:01, Hans Joachim Desserud wrote: > I've read through this now, but just to double-check: > There's various bug reports with package-conflicts for files in > '/etc/signon-ui/webkit-options.d/*' between account-plugins and > kaccounts-providers. (For instance bug 1617564) > >>From what I see, this issue will remove the conflicting files from the > account-plugins side and thus fix the issue. Does that mean that these > other issues should all be marked as duplicates of this one? > -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to gnome-control-center- signon in Ubuntu. https://bugs.launchpad.net/bugs/1565772 Title: [SRU] Allow plugins to decide which username to set on new accounts Status in Online Accounts: Account plugins: Fix Released Status in Canonical System Image: Fix Released Status in Online Accounts: GNOME Control Center: Fix Released Status in webapps-sprint: Fix Committed Status in account-plugins package in Ubuntu: Fix Released Status in gnome-control-center-signon package in Ubuntu: Fix Released Status in account-plugins source package in Xenial: Fix Committed Status in gnome-control-center-signon source package in Xenial: Fix Committed Status in account-plugins source package in Yakkety: Fix Released Status in gnome-control-center-signon source package in Yakkety: Fix Released Bug description: This bug is related to bug 1547647, even though it makes sense in any case. Currently, the ApOAuthPlugin class in libaccount-plugin gets the username from the SignonIdentity, which in turn gets it from signon- ui, which in the current WebKit1 implementation gets it from the DOM of the login webpage. This is a hack, it's fragile, not trivial to port to the Oxide web engine, and possibly against some providers' guidelines. We should retrieve the username using some REST API provided by the service, and in order to do so we need to extend libaccounts-plugin with some hooks which subclasses can use to get the username. Once we fix this we can also get rid of the files /etc/signon-ui /webkit-options.d/, which are conflicting with those installed by the KDE account plugins packages. SRU information === [Impact] The same file /etc/signon-ui/webkit- options.d/www.facebook.com.conf is installed by the account-plugin- facebook package (used by Unity) and by kaccount-providers (used by KDE). See this bug's duplicates to see actual bug reports. [Test Case] Install both account-plugin-facebook and kaccount- providers and you'll get the conflict. [Regression Potential] Users running KDE will be completely unaffected by this. Users running Unity might see a change when creating accounts in System Settings->Online Accounts: with this bugfix, the account's display name is obtained by making a REST API call to the remote service, rather than by scrapping the DOM of the server webpages (which is a hack, and prone to errors if the providers' webpage changes). The new way of retrieving the username is the proper one, and it's been tested to work reliably. In any case, the worst thing that might happen is that accounts get created with an empty display name, which is mostly an aesthetic problem (the display name is used only for UI purposes). To manage notifications about this bug go to: https://bugs.launchpad.net/account-plugins/+bug/1565772/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1694367] Re: Screen tearing in 16.10 onwards
** Bug watch added: freedesktop.org Bugzilla #101229 https://bugs.freedesktop.org/show_bug.cgi?id=101229 ** Also affects: mesa via https://bugs.freedesktop.org/show_bug.cgi?id=101229 Importance: Unknown Status: Unknown -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to mesa in Ubuntu. https://bugs.launchpad.net/bugs/1694367 Title: Screen tearing in 16.10 onwards Status in Mesa: Unknown Status in kernel-package package in Ubuntu: New Status in mesa package in Ubuntu: New Bug description: In 16.10 onwards my laptop has always shown screen tearing globally, additionally GL applications will not v-sync despite attempting to, they appear to sync slightly off from the [integrated] display. This occurs with kernels 4.8 to 4.11 and mesa 12 to 17, so not entirely sure if it's a bug with either or a default miss- configuration in ubuntu... ubuntu-bug also appears to be broken... To manage notifications about this bug go to: https://bugs.launchpad.net/mesa/+bug/1694367/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1694542] [NEW] can't get print to work
Public bug reported: i have a samsung m2070fw printer it will not respond ProblemType: Bug DistroRelease: Ubuntu 16.04 Package: xorg 1:7.7+13ubuntu3 ProcVersionSignature: Ubuntu 4.4.0-78.99-generic 4.4.62 Uname: Linux 4.4.0-78-generic i686 .tmp.unity_support_test.0: ApportVersion: 2.20.1-0ubuntu2.6 Architecture: i386 BootLog: [[0;1;31mFAILED[0m] Failed to start Automatic USB/Bluetooth printer setup (-devices-pci:00-:00:1d.7-usb2-2\x2d8-2\x2d8.2). See 'systemctl status "udev-configure-printer@-devices-pci:00-:00:1d.7-usb2-2\\x2d8-2\\x2d8.2.service"' for details. [[0;32m OK [0m] Started Network Manager Script Dispatcher Service. [[0;32m OK [0m] Started Modem Manager. CompizPlugins: No value set for `/apps/compiz-1/general/screen0/options/active_plugins' CompositorRunning: compiz CompositorUnredirectDriverBlacklist: '(nouveau|Intel).*Mesa 8.0' CompositorUnredirectFSW: true Date: Tue May 30 17:32:56 2017 DistUpgraded: 2016-08-03 21:03:22,827 DEBUG icon theme changed, re-reading DistroCodename: xenial DistroVariant: ubuntu ExtraDebuggingInterest: Yes, if not too technical GraphicsCard: Intel Corporation 82G33/G31 Express Integrated Graphics Controller [8086:29c2] (rev 02) (prog-if 00 [VGA controller]) Subsystem: Hewlett-Packard Company 82G33/G31 Express Integrated Graphics Controller [103c:2a6f] InstallationDate: Installed on 2014-11-25 (917 days ago) InstallationMedia: Ubuntu 14.04.1 LTS "Trusty Tahr" - Release i386 (20140722.2) MachineType: HP-Pavilion NC839AA-ABA a6838f ProcEnviron: LANGUAGE=en_US PATH=(custom, no user) LANG=en_US.UTF-8 SHELL=/bin/bash ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-4.4.0-78-generic root=UUID=8c58f378-744f-466b-8075-ce338c5307b9 ro quiet splash SourcePackage: xorg UpgradeStatus: Upgraded to xenial on 2016-08-04 (299 days ago) dmi.bios.date: 02/23/2009 dmi.bios.vendor: American Megatrends Inc. dmi.bios.version: 5.37 dmi.board.name: Benicia dmi.board.vendor: PEGATRON CORPORATION dmi.board.version: 1.01 dmi.chassis.asset.tag: Asset-1234567890 dmi.chassis.type: 3 dmi.chassis.vendor: Hewlett-Packard dmi.chassis.version: Chassis Version dmi.modalias: dmi:bvnAmericanMegatrendsInc.:bvr5.37:bd02/23/2009:svnHP-Pavilion:pnNC839AA-ABAa6838f:pvr:rvnPEGATRONCORPORATION:rnBenicia:rvr1.01:cvnHewlett-Packard:ct3:cvrChassisVersion: dmi.product.name: NC839AA-ABA a6838f dmi.sys.vendor: HP-Pavilion version.compiz: compiz 1:0.9.12.2+16.04.20160823-0ubuntu1 version.libdrm2: libdrm2 2.4.70-1~ubuntu16.04.1 version.libgl1-mesa-dri: libgl1-mesa-dri 12.0.6-0ubuntu0.16.04.1 version.libgl1-mesa-dri-experimental: libgl1-mesa-dri-experimental N/A version.libgl1-mesa-glx: libgl1-mesa-glx 12.0.6-0ubuntu0.16.04.1 version.xserver-xorg-core: xserver-xorg-core 2:1.18.4-0ubuntu0.2 version.xserver-xorg-input-evdev: xserver-xorg-input-evdev 1:2.10.1-1ubuntu2 version.xserver-xorg-video-ati: xserver-xorg-video-ati 1:7.7.0-1 version.xserver-xorg-video-intel: xserver-xorg-video-intel 2:2.99.917+git20160325-1ubuntu1.2 version.xserver-xorg-video-nouveau: xserver-xorg-video-nouveau 1:1.0.12-1build2 xserver.bootTime: Tue May 30 21:16:22 2017 xserver.configfile: default xserver.devices: inputPower Button KEYBOARD, id 6 inputPower Button KEYBOARD, id 7 inputMicrosoft Microsoft Wheel Mouse Optical® MOUSE, id 8 inputAT Translated Set 2 keyboard KEYBOARD, id 9 xserver.errors: xserver.logfile: /var/log/Xorg.0.log xserver.outputs: product id 44416 vendor ACR xserver.version: 2:1.18.4-0ubuntu0.2 ** Affects: xorg (Ubuntu) Importance: Undecided Status: New ** Tags: apport-bug compiz-0.9 i386 ubuntu xenial -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to xorg in Ubuntu. https://bugs.launchpad.net/bugs/1694542 Title: can't get print to work Status in xorg package in Ubuntu: New Bug description: i have a samsung m2070fw printer it will not respond ProblemType: Bug DistroRelease: Ubuntu 16.04 Package: xorg 1:7.7+13ubuntu3 ProcVersionSignature: Ubuntu 4.4.0-78.99-generic 4.4.62 Uname: Linux 4.4.0-78-generic i686 .tmp.unity_support_test.0: ApportVersion: 2.20.1-0ubuntu2.6 Architecture: i386 BootLog: [[0;1;31mFAILED[0m] Failed to start Automatic USB/Bluetooth printer setup (-devices-pci:00-:00:1d.7-usb2-2\x2d8-2\x2d8.2). See 'systemctl status "udev-configure-printer@-devices-pci:00-:00:1d.7-usb2-2\\x2d8-2\\x2d8.2.service"' for details. [[0;32m OK [0m] Started Network Manager Script Dispatcher Service. [[0;32m OK [0m] Started Modem Manager. CompizPlugins: No value set for `/apps/compiz-1/general/screen0/options/active_plugins' CompositorRunning: compiz CompositorUnredirectDriverBlacklist: '(nouveau|Intel).*Mesa 8.0' CompositorUnredirectFSW: true Date: Tue May 30 17:32:56 2017 DistUpgraded: 2016-08-03
[Touch-packages] [Bug 1585084] Re: Volume notification keeps popping up constantly (the notify-OSD bubble on top-right corner)
@vanvugt I tested 17.04 in a live USB environment all day. This bug never showed up. In 16.04 LTS this annoying bug pops up at least once in a couple of minutes so I assume it's fixed in Zesty at least. Thanks for looking into it. -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to pulseaudio in Ubuntu. https://bugs.launchpad.net/bugs/1585084 Title: Volume notification keeps popping up constantly (the notify-OSD bubble on top-right corner) Status in pulseaudio package in Ubuntu: Incomplete Bug description: I upgraded to Ubuntu 16.04 yesterday, I did a clean install while preserving the home directory which is mounted in a separate partition. Even during the installation I had constant volume notification bubble appearing on the top-right corner of my screen, it would come and go about twice every minute. I just thought it was due to installing hardware drivers or something but the problem persisted even when I booted into the freshly installed system. I did some searching and two users reported the exact problem. And one more suggested this happens because constant disconnect and reconnect of the sound card which makes sense as the sound settings flashes briefly during every popup. Someone on IRC suggested to kill pulseaudio and thus restart it, that does not fix the issue. I also tried the Live environment thinking it might be due to some old config files in home partition (which was preserved during upgrade), but this problem happens in the live environment as well, which makes sense because it was present during installation as well. Users with the same issue: http://ubuntuforums.org/showthread.php?t=2323815 http://askubuntu.com/questions/773008/constant-volume-osd-in-16-04 http://askubuntu.com/questions/767466/sound-card-being-disconnected-reconnected-constantly Thanks. ProblemType: Bug DistroRelease: Ubuntu 16.04 Package: pulseaudio 1:8.0-0ubuntu3 ProcVersionSignature: Ubuntu 4.4.0-22.40-generic 4.4.8 Uname: Linux 4.4.0-22-generic x86_64 ApportVersion: 2.20.1-0ubuntu2 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC2: sidd 1651 F pulseaudio /dev/snd/controlC0: sidd 1651 F pulseaudio /dev/snd/controlC1: sidd 1651 F pulseaudio CurrentDesktop: Unity Date: Tue May 24 12:31:12 2016 InstallationDate: Installed on 2016-05-23 (0 days ago) InstallationMedia: Ubuntu 16.04 LTS "Xenial Xerus" - Release amd64 (20160420.1) SourcePackage: pulseaudio UpgradeStatus: No upgrade log present (probably fresh install) dmi.bios.date: 08/23/2011 dmi.bios.vendor: American Megatrends Inc. dmi.bios.version: 0705 dmi.board.asset.tag: To be filled by O.E.M. dmi.board.name: M5A97 EVO dmi.board.vendor: ASUSTeK Computer INC. dmi.board.version: Rev 1.xx dmi.chassis.asset.tag: To Be Filled By O.E.M. dmi.chassis.type: 3 dmi.chassis.vendor: To Be Filled By O.E.M. dmi.chassis.version: To Be Filled By O.E.M. dmi.modalias: dmi:bvnAmericanMegatrendsInc.:bvr0705:bd08/23/2011:svnTobefilledbyO.E.M.:pnTobefilledbyO.E.M.:pvrTobefilledbyO.E.M.:rvnASUSTeKComputerINC.:rnM5A97EVO:rvrRev1.xx:cvnToBeFilledByO.E.M.:ct3:cvrToBeFilledByO.E.M.: dmi.product.name: To be filled by O.E.M. dmi.product.version: To be filled by O.E.M. dmi.sys.vendor: To be filled by O.E.M. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/pulseaudio/+bug/1585084/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1694331] Re: "internal error" popup on login
Andreas Fritiofson, to keep this report manageable, let us avoid discussing other computers, other colleagues computers, etc. and instead remain focused here in this report on the Asus UX32VD. One problem, per computer setup, per report. If you have an issue with a different computer, file a new bug report while using that different computer. Remaining focused on the Asus UX32VD, as per https://wiki.ubuntu.com/Releases Ubuntu 16.10 will be EoL'ing in a month. Hence, could you please upgrade to 17.04 and advise if Xorg crashes still from time to time? ** Description changed: - Sometimes (not very often), Ubuntu shows an error popup immediately - after login (after power-on) that says Xorg has crashed. No other ill - effects have been noticed, everything works normally after that. - - The automatic error reporting does not go through because of - "UnreportableReason: Invalid core dump: BFD: Warning - /tmp/apport_core_5n7s8i3d is truncated: expected core file size >= - 40902656, found: 21037056." - - I was asked by Christopher M. Penalver in Bug 1426596 to submit a new - bug using "ubuntu-bug xorg" when the error appeared. This is that - report, although the computer I used now to generate the report is not - the same as I mentioned in the original bug (I've seen the same issue on - more or less all computers I've used and IIRC from at least 16.04 to - 17.04). + My Asus UX32VD shows an Xorg crash from time to time (but not nearly at + every boot). ProblemType: Bug DistroRelease: Ubuntu 16.10 Package: xorg 1:7.7+13ubuntu4 ProcVersionSignature: Ubuntu 4.8.0-53.56-generic 4.8.17 Uname: Linux 4.8.0-53-generic x86_64 .tmp.unity_support_test.0: - + ApportVersion: 2.20.3-0ubuntu8.3 Architecture: amd64 CompizPlugins: [core,composite,opengl,compiztoolbox,decor,vpswitch,snap,mousepoll,resize,place,move,wall,grid,regex,imgpng,session,gnomecompat,animation,fade,unitymtgrabhandles,workarounds,scale,expo,ezoom,unityshell] CompositorRunning: compiz CompositorUnredirectDriverBlacklist: '(nouveau|Intel).*Mesa 8.0' CompositorUnredirectFSW: true CurrentDesktop: Unity Date: Mon May 29 22:31:18 2017 DistUpgraded: 2017-04-15 01:32:04,429 DEBUG /openCache(), new cache size 85680 DistroCodename: yakkety DistroVariant: ubuntu DkmsStatus: - bbswitch, 0.8, 4.8.0-52-generic, x86_64: installed - bbswitch, 0.8, 4.8.0-53-generic, x86_64: installed + bbswitch, 0.8, 4.8.0-52-generic, x86_64: installed + bbswitch, 0.8, 4.8.0-53-generic, x86_64: installed ExtraDebuggingInterest: Yes GraphicsCard: - Intel Corporation 3rd Gen Core processor Graphics Controller [8086:0166] (rev 09) (prog-if 00 [VGA controller]) -Subsystem: ASUSTeK Computer Inc. 3rd Gen Core processor Graphics Controller [1043:1507] + Intel Corporation 3rd Gen Core processor Graphics Controller [8086:0166] (rev 09) (prog-if 00 [VGA controller]) + Subsystem: ASUSTeK Computer Inc. 3rd Gen Core processor Graphics Controller [1043:1507] InstallationDate: Installed on 2014-04-18 (1137 days ago) InstallationMedia: Ubuntu 14.04 LTS "Trusty Tahr" - Release amd64 (20140417) MachineType: ASUSTeK COMPUTER INC. UX32VD ProcKernelCmdLine: BOOT_IMAGE=/@/boot/vmlinuz-4.8.0-53-generic.efi.signed root=UUID=959fa127-2d15-48a5-9fa0-70f918fab2ad ro rootflags=subvol=@ quiet splash pcie_aspm=force nmi_watchdog=0 vt.handoff=7 SourcePackage: xorg UpgradeStatus: Upgraded to yakkety on 2017-04-14 (44 days ago) dmi.bios.date: 01/29/2013 dmi.bios.vendor: American Megatrends Inc. dmi.bios.version: UX32VD.214 dmi.board.asset.tag: ATN12345678901234567 dmi.board.name: UX32VD dmi.board.vendor: ASUSTeK COMPUTER INC. dmi.board.version: 1.0 dmi.chassis.asset.tag: No Asset Tag dmi.chassis.type: 10 dmi.chassis.vendor: ASUSTeK COMPUTER INC. dmi.chassis.version: 1.0 dmi.modalias: dmi:bvnAmericanMegatrendsInc.:bvrUX32VD.214:bd01/29/2013:svnASUSTeKCOMPUTERINC.:pnUX32VD:pvr1.0:rvnASUSTeKCOMPUTERINC.:rnUX32VD:rvr1.0:cvnASUSTeKCOMPUTERINC.:ct10:cvr1.0: dmi.product.name: UX32VD dmi.product.version: 1.0 dmi.sys.vendor: ASUSTeK COMPUTER INC. version.compiz: compiz 1:0.9.13.0+16.10.20160818.2-0ubuntu2 version.ia32-libs: ia32-libs N/A version.libdrm2: libdrm2 2.4.70-1 version.libgl1-mesa-dri: libgl1-mesa-dri 12.0.6-0ubuntu0.16.10.1 version.libgl1-mesa-dri-experimental: libgl1-mesa-dri-experimental N/A version.libgl1-mesa-glx: libgl1-mesa-glx 12.0.6-0ubuntu0.16.10.1 version.xserver-xorg-core: xserver-xorg-core 2:1.18.4-1ubuntu6.1 version.xserver-xorg-input-evdev: xserver-xorg-input-evdev 1:2.10.2-1ubuntu1 version.xserver-xorg-video-ati: xserver-xorg-video-ati 1:7.7.1-1 version.xserver-xorg-video-intel: xserver-xorg-video-intel 2:2.99.917+git20160706-1ubuntu1 version.xserver-xorg-video-nouveau: xserver-xorg-video-nouveau 1:1.0.12-2 xserver.bootTime: Mon May 29 22:28:30 2017 xserver.configfile: default xserver.errors: - + xserver.logfile: /var/log/Xorg.0.log xserver.version:
[Touch-packages] [Bug 1676829] Re: Mic input volume always resets (to middle/low value) on resume or restart
Status changed to 'Confirmed' because the bug affects multiple users. ** Changed in: pulseaudio (Ubuntu) Status: New => Confirmed -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to pulseaudio in Ubuntu. https://bugs.launchpad.net/bugs/1676829 Title: Mic input volume always resets (to middle/low value) on resume or restart Status in pulseaudio package in Ubuntu: Confirmed Bug description: Sound card: CA0106/CA0111 Each time I start PC - mic input volume resets to some "default" value. This happens from 16.04 (maybe earlier). Now I have 17.04, still have it. Each time I run: 1) alsamixer 2) select input device, "Line In" 3) set it to max. (Or same actions in Ubuntu GUI) Then (after restart or suspend) the volume goes back to some middle value (low for me). I'm pissed off setting it back again and again. Does someone else have this problem? To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/pulseaudio/+bug/1676829/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1631782] Re: Volume and Mic controls grayed out and not working
Status changed to 'Confirmed' because the bug affects multiple users. ** Changed in: pulseaudio (Ubuntu) Status: New => Confirmed -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to pulseaudio in Ubuntu. https://bugs.launchpad.net/bugs/1631782 Title: Volume and Mic controls grayed out and not working Status in pulseaudio package in Ubuntu: Confirmed Bug description: Hallo testing Yakkety 08-10 buld on live session i have the controls of the volume locked and not working as shown in the attached screenshot. Even in sound setting I can-t set the desired volume, anyway it play sounds correctly. ProblemType: Bug DistroRelease: Ubuntu 16.10 Package: pulseaudio 1:9.0-2ubuntu2 ProcVersionSignature: Ubuntu 4.8.0-21.23-generic 4.8.0 Uname: Linux 4.8.0-21-generic x86_64 ApportVersion: 2.20.3-0ubuntu7 Architecture: amd64 CasperVersion: 1.379 CurrentDesktop: Unity Date: Sun Oct 9 17:53:10 2016 LiveMediaBuild: Ubuntu 16.10 "Yakkety Yak" - Alpha amd64 (20161008) ProcEnviron: TERM=xterm-256color PATH=(custom, no user) XDG_RUNTIME_DIR= LANG=en_US.UTF-8 SHELL=/bin/bash PulseList: Error: command ['pacmd', 'list'] failed with exit code 1: No PulseAudio daemon running, or not running as session daemon. SourcePackage: pulseaudio UpgradeStatus: No upgrade log present (probably fresh install) dmi.bios.date: 08/20/2010 dmi.bios.vendor: Award Software International, Inc. dmi.bios.version: F7 dmi.board.name: H55M-S2H dmi.board.vendor: Gigabyte Technology Co., Ltd. dmi.board.version: x.x dmi.chassis.type: 3 dmi.chassis.vendor: Gigabyte Technology Co., Ltd. dmi.modalias: dmi:bvnAwardSoftwareInternational,Inc.:bvrF7:bd08/20/2010:svnGigabyteTechnologyCo.,Ltd.:pnH55M-S2H:pvr:rvnGigabyteTechnologyCo.,Ltd.:rnH55M-S2H:rvrx.x:cvnGigabyteTechnologyCo.,Ltd.:ct3:cvr: dmi.product.name: H55M-S2H dmi.sys.vendor: Gigabyte Technology Co., Ltd. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/pulseaudio/+bug/1631782/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1694517] [NEW] Kernel crashes, task wpa_supplicant blocked for more than 120 seconds
Public bug reported: When using Gnome-Shell on Ubuntu 16.04, the Internet connection will suddenly drop off, even though the network connection icon will still indicate a connection. Attempting to run `sudo service network-manager restart` will hang indefinitely. Attempting to restart Gnome-Shell via alt+F2+r, will cause Gnome-Shell to hang indefinitely. Switching to a terminal, I inspecting `dmesg` and found several messages like: [178443.199324] INFO: task wpa_supplicant:1708 blocked for more than 120 seconds. [178443.199332] Tainted: G OE 4.4.0-78-generic #99-Ubuntu [178443.199335] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. [178443.199337] wpa_supplicant D 88085849ba38 0 1708 1 0x [178443.199345] 88085849ba38 88087f516e30 88001cd2da00 880853c35a00 [178443.199350] 88085849c000 81ef8184 880853c35a00 [178443.199354] 81ef8188 88085849ba50 8183c8f5 81ef8180 [178443.199358] Call Trace: [178443.199369] [] schedule+0x35/0x80 [178443.199374] [] schedule_preempt_disabled+0xe/0x10 [178443.199378] [] __mutex_lock_slowpath+0xb9/0x130 [178443.199386] [] mutex_lock+0x1f/0x30 [178443.199393] [] rtnl_lock+0x15/0x20 [178443.199422] [] nl80211_pre_doit+0xeb/0x180 [cfg80211] [178443.199429] [] genl_family_rcv_msg+0x1ad/0x3e0 [178443.199435] [] ? __wake_up_common+0x52/0x90 [178443.199441] [] ? genl_family_rcv_msg+0x3e0/0x3e0 [178443.199446] [] genl_rcv_msg+0x76/0xb0 [178443.199450] [] netlink_rcv_skb+0xa4/0xc0 [178443.199455] [] genl_rcv+0x28/0x40 [178443.199459] [] netlink_unicast+0x18a/0x240 [178443.199464] [] netlink_sendmsg+0x2fb/0x3a0 [178443.199470] [] ? aa_sock_msg_perm+0x61/0x150 [178443.199477] [] sock_sendmsg+0x38/0x50 [178443.199480] [] ___sys_sendmsg+0x281/0x290 [178443.199487] [] ? __fpu__restore_sig+0xa1/0x480 [178443.199491] [] __sys_sendmsg+0x51/0x90 [178443.199496] [] SyS_sendmsg+0x12/0x20 [178443.199501] [] entry_SYSCALL_64_fastpath+0x16/0x71 I see similar errors for other programs other than wpa_supplicant, so it might not be isolated to it, but I'm not sure where else to submit this error to. All other `sudo` commands hung, even after 15 minutes of waiting, leaving me no choice but to reboot. However, this has happened several times after a recent update, and the symptoms always manifest exactly the same. No Internet, then Gnome-Shell hangs, then all sudo commands hang. I managed to copy my dmesg log before the reboot, which I have attached. ProblemType: Bug DistroRelease: Ubuntu 16.04 Package: wpasupplicant 2.4-0ubuntu6 ProcVersionSignature: Ubuntu 4.4.0-78.99-generic 4.4.62 Uname: Linux 4.4.0-78-generic x86_64 ApportVersion: 2.20.1-0ubuntu2.6 Architecture: amd64 CurrentDesktop: GNOME Date: Tue May 30 14:56:58 2017 DistributionChannelDescriptor: # This is a distribution channel descriptor # For more information see http://wiki.ubuntu.com/DistributionChannelDescriptor canonical-oem-somerville-xenial-amd64-20160624-2 InstallationDate: Installed on 2017-03-09 (81 days ago) InstallationMedia: Ubuntu 16.04 "Xenial" - Build amd64 LIVE Binary 20160624-10:47 SourcePackage: wpa UpgradeStatus: No upgrade log present (probably fresh install) ** Affects: wpa (Ubuntu) Importance: Undecided Status: New ** Tags: amd64 apport-bug xenial ** Attachment added: "dmesg log just after system begun to hang" https://bugs.launchpad.net/bugs/1694517/+attachment/4886316/+files/dmesg.txt -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to wpa in Ubuntu. https://bugs.launchpad.net/bugs/1694517 Title: Kernel crashes, task wpa_supplicant blocked for more than 120 seconds Status in wpa package in Ubuntu: New Bug description: When using Gnome-Shell on Ubuntu 16.04, the Internet connection will suddenly drop off, even though the network connection icon will still indicate a connection. Attempting to run `sudo service network-manager restart` will hang indefinitely. Attempting to restart Gnome-Shell via alt+F2+r, will cause Gnome-Shell to hang indefinitely. Switching to a terminal, I inspecting `dmesg` and found several messages like: [178443.199324] INFO: task wpa_supplicant:1708 blocked for more than 120 seconds. [178443.199332] Tainted: G OE 4.4.0-78-generic #99-Ubuntu [178443.199335] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. [178443.199337] wpa_supplicant D 88085849ba38 0 1708 1 0x [178443.199345] 88085849ba38 88087f516e30 88001cd2da00 880853c35a00 [178443.199350] 88085849c000 81ef8184 880853c35a00 [178443.199354] 81ef8188
[Touch-packages] [Bug 1565772] Re: [SRU] Allow plugins to decide which username to set on new accounts
I've read through this now, but just to double-check: There's various bug reports with package-conflicts for files in '/etc/signon-ui/webkit-options.d/*' between account-plugins and kaccounts-providers. (For instance bug 1617564) >From what I see, this issue will remove the conflicting files from the account-plugins side and thus fix the issue. Does that mean that these other issues should all be marked as duplicates of this one? -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to gnome-control-center- signon in Ubuntu. https://bugs.launchpad.net/bugs/1565772 Title: [SRU] Allow plugins to decide which username to set on new accounts Status in Online Accounts: Account plugins: Fix Released Status in Canonical System Image: Fix Released Status in Online Accounts: GNOME Control Center: Fix Released Status in webapps-sprint: Fix Committed Status in account-plugins package in Ubuntu: Fix Released Status in gnome-control-center-signon package in Ubuntu: Fix Released Status in account-plugins source package in Xenial: Fix Committed Status in gnome-control-center-signon source package in Xenial: Fix Committed Status in account-plugins source package in Yakkety: Fix Released Status in gnome-control-center-signon source package in Yakkety: Fix Released Bug description: This bug is related to bug 1547647, even though it makes sense in any case. Currently, the ApOAuthPlugin class in libaccount-plugin gets the username from the SignonIdentity, which in turn gets it from signon- ui, which in the current WebKit1 implementation gets it from the DOM of the login webpage. This is a hack, it's fragile, not trivial to port to the Oxide web engine, and possibly against some providers' guidelines. We should retrieve the username using some REST API provided by the service, and in order to do so we need to extend libaccounts-plugin with some hooks which subclasses can use to get the username. Once we fix this we can also get rid of the files /etc/signon-ui /webkit-options.d/, which are conflicting with those installed by the KDE account plugins packages. SRU information === [Impact] The same file /etc/signon-ui/webkit- options.d/www.facebook.com.conf is installed by the account-plugin- facebook package (used by Unity) and by kaccount-providers (used by KDE). See this bug's duplicates to see actual bug reports. [Test Case] Install both account-plugin-facebook and kaccount- providers and you'll get the conflict. [Regression Potential] Users running KDE will be completely unaffected by this. Users running Unity might see a change when creating accounts in System Settings->Online Accounts: with this bugfix, the account's display name is obtained by making a REST API call to the remote service, rather than by scrapping the DOM of the server webpages (which is a hack, and prone to errors if the providers' webpage changes). The new way of retrieving the username is the proper one, and it's been tested to work reliably. In any case, the worst thing that might happen is that accounts get created with an empty display name, which is mostly an aesthetic problem (the display name is used only for UI purposes). To manage notifications about this bug go to: https://bugs.launchpad.net/account-plugins/+bug/1565772/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1428121] Re: Intel HDMI Audio not working with IOMMU enabled
I've now tested the patch myself by patching kernel 4.10.0.21.23. Unfortunately, it does not fix the problem. -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to alsa-driver in Ubuntu. https://bugs.launchpad.net/bugs/1428121 Title: Intel HDMI Audio not working with IOMMU enabled Status in ALSA driver: Unknown Status in alsa-driver package in Ubuntu: Confirmed Bug description: New ASRock Z97 Extreme 6 motherboard with an Intel i7 4790S and an Nvidia GTX 650. Host uses Intel IGD for video and HDMI audio out. When I pass kernel flags 'intel_iommu=on' or 'intel_iommu=on,igfx_on' HDMI audio no longer functions although the device and modules seem to load and I cannot locate any error messages. In this configuration IOMMU functions as expected and I can successfully pass the Nvidia card through to a KVM guest using VFIO. As per this (https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1223840) bug report and the linked bugzilla thread I attempted to use kernel flag 'intel_iommu=on,igfx_off'. This resolves the HDMI audio out but breaks IOMMU as in VGA pass through generates DMA errors. I'm running from a clean installation of 14.10 with no modifications to the kernel or kvm, qemu, libvirt or virt-manager. In either scenario above the analogue audio out continues to function, I haven't tested the optical out as I have no hardware to do so. ProblemType: Bug DistroRelease: Ubuntu 14.10 Package: linux-image-3.16.0-31-generic 3.16.0-31.41 ProcVersionSignature: Ubuntu 3.16.0-31.41-generic 3.16.7-ckt5 Uname: Linux 3.16.0-31-generic x86_64 ApportVersion: 2.14.7-0ubuntu8.2 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC2: kelvin 3468 F pulseaudio /dev/snd/controlC3: kelvin 3468 F pulseaudio /dev/snd/controlC0: kelvin 3468 F pulseaudio /dev/snd/controlC1: kelvin 3468 F pulseaudio CurrentDesktop: Unity Date: Wed Mar 4 12:53:17 2015 HibernationDevice: RESUME=UUID=4d35060a-85c4-45fd-9f8e-530491588931 InstallationDate: Installed on 2015-02-26 (5 days ago) InstallationMedia: Ubuntu-Server 14.10 "Utopic Unicorn" - Release amd64 (20141022.2) MachineType: To Be Filled By O.E.M. To Be Filled By O.E.M. ProcFB: 0 inteldrmfb ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.16.0-31-generic.efi.signed root=UUID=4914f227-6bb0-40bb-a781-9ad7111a996f ro intremap=no_x2apic_optout intel_iommu=on,forcedac pci-stub.ids=10de:11c8,10de:0e0b nomdmonddf nomdmonisw RelatedPackageVersions: linux-restricted-modules-3.16.0-31-generic N/A linux-backports-modules-3.16.0-31-generic N/A linux-firmware 1.138.1 RfKill: SourcePackage: linux UpgradeStatus: No upgrade log present (probably fresh install) dmi.bios.date: 12/17/2014 dmi.bios.vendor: American Megatrends Inc. dmi.bios.version: P1.70 dmi.board.name: Z97 Extreme6 dmi.board.vendor: ASRock dmi.chassis.asset.tag: To Be Filled By O.E.M. dmi.chassis.type: 3 dmi.chassis.vendor: To Be Filled By O.E.M. dmi.chassis.version: To Be Filled By O.E.M. dmi.modalias: dmi:bvnAmericanMegatrendsInc.:bvrP1.70:bd12/17/2014:svnToBeFilledByO.E.M.:pnToBeFilledByO.E.M.:pvrToBeFilledByO.E.M.:rvnASRock:rnZ97Extreme6:rvr:cvnToBeFilledByO.E.M.:ct3:cvrToBeFilledByO.E.M.: dmi.product.name: To Be Filled By O.E.M. dmi.product.version: To Be Filled By O.E.M. dmi.sys.vendor: To Be Filled By O.E.M. To manage notifications about this bug go to: https://bugs.launchpad.net/alsa-driver/+bug/1428121/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1686803] Re: sudo returns exit code 0 if child is killed with SIGTERM
** Tags added: artful -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to sudo in Ubuntu. https://bugs.launchpad.net/bugs/1686803 Title: sudo returns exit code 0 if child is killed with SIGTERM Status in sudo: Unknown Status in sudo package in Ubuntu: Triaged Bug description: Please backport upstream sudo changeset 10917:50b988d0c97f "The fix for Bug #722 contained a typo/thinko that resulted in the" to xenial, yakkety, and zesty versions of sudo. This will fix a regression documented by this upstream bug report: https://bugzilla.sudo.ws/show_bug.cgi?id=784 sudo 1.8.15 changeset 10229:153f016db8f1 "When the command sudo is running is killed by a signal, sudo will" introduced a regression where the exit status is always 0 when a command is killed by a signal other than SIGINT. https://www.sudo.ws/repos/sudo/rev/153f016db8f1 This will be fixed in sudo 1.8.20 with changeset 10917:50b988d0c97f "The fix for Bug #722 contained a typo/thinko that resulted in the". https://www.sudo.ws/repos/sudo/rev/50b988d0c97f trusty sudo is based off sudo 1.8.9 and is not affected. xenial sudo based off sudo 1.8.16, yaketty sudo based off sudo 1.8.16, and zesty sudo based off 1.8.19 need the fix. To manage notifications about this bug go to: https://bugs.launchpad.net/sudo/+bug/1686803/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1316873] Re: Left mouse button stops working
Never had it until a recent Mint Linux Mint 18.1 Serena update. However.. I installed OpenSuSE KDE Plasma and it exists there. I dropped kernel version back to 4.4.0-21 and it occurs much less than with new kernels, if it is of any help. Note that all mouse debugging tools result in the left click not recognized, nothing in the logs at all. All other keys, including mouse wheel and right click work fine. -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to xorg in Ubuntu. https://bugs.launchpad.net/bugs/1316873 Title: Left mouse button stops working Status in xorg package in Ubuntu: Confirmed Bug description: This problem has plagued me for a few years across different laptops and Ubuntu versions. Current I am experiencing this on a Dell Inspiron 15z running Ubuntu 14.04 LTS. It typically starts after I have used the chat or call feature in gmail, by clicking on the phone icon in the left chat margin. I am a Firefox user and have not tested this with chrome etc. It has not happened if i dont install google-talkplugin so it is quite possible that the plugin is to blame. Symptom === The left mouse button on all attached mice - USB , Trackpad and touch - will not do anything however the right mouse button continues to work. This happens to all applications and also to the desktop. The keyboard continues to function as normal. When this occurs , my solution is to Alt-F4 close all windows and log out of the X session. When I re-login the left mouse button works as normal. This is an irritant and work disruptor as I have to save all browser and desktop applications to safe state before I logout to reset the mouse. I will appreciate any soltion or workaround. ProblemType: Bug DistroRelease: Ubuntu 14.04 Package: xorg 1:7.7+1ubuntu8 ProcVersionSignature: Ubuntu 3.13.0-24.47-generic 3.13.9 Uname: Linux 3.13.0-24-generic x86_64 .tmp.unity.support.test.0: ApportVersion: 2.14.1-0ubuntu3 Architecture: amd64 CompizPlugins: No value set for `/apps/compiz-1/general/screen0/options/active_plugins' CompositorRunning: compiz CompositorUnredirectDriverBlacklist: '(nouveau|Intel).*Mesa 8.0' CompositorUnredirectFSW: true CurrentDesktop: Unity Date: Tue May 6 21:41:29 2014 DistUpgraded: Fresh install DistroCodename: trusty DistroVariant: ubuntu ExtraDebuggingInterest: Yes GraphicsCard: Intel Corporation 3rd Gen Core processor Graphics Controller [8086:0166] (rev 09) (prog-if 00 [VGA controller]) Subsystem: Dell Device [1028:058f] InstallationDate: Installed on 2014-04-17 (19 days ago) InstallationMedia: Ubuntu 14.04 LTS "Trusty Tahr" - Release amd64 (20140417) MachineType: Dell Inc. Inspiron 5523 ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.13.0-24-generic root=UUID=f5004b03-b37f-4733-88a8-51c6f3bd0a4d ro quiet splash vt.handoff=7 SourcePackage: xorg Symptom: display UpgradeStatus: No upgrade log present (probably fresh install) dmi.bios.date: 05/18/2013 dmi.bios.vendor: Dell Inc. dmi.bios.version: A05 dmi.board.name: 0GKGJG dmi.board.vendor: Dell Inc. dmi.board.version: A05 dmi.chassis.type: 8 dmi.chassis.vendor: Dell Inc. dmi.chassis.version: Not Specified dmi.modalias: dmi:bvnDellInc.:bvrA05:bd05/18/2013:svnDellInc.:pnInspiron5523:pvrNotSpecified:rvnDellInc.:rn0GKGJG:rvrA05:cvnDellInc.:ct8:cvrNotSpecified: dmi.product.name: Inspiron 5523 dmi.product.version: Not Specified dmi.sys.vendor: Dell Inc. version.compiz: compiz 1:0.9.11+14.04.20140423-0ubuntu1 version.ia32-libs: ia32-libs N/A version.libdrm2: libdrm2 2.4.52-1 version.libgl1-mesa-dri: libgl1-mesa-dri 10.1.0-4ubuntu5 version.libgl1-mesa-dri-experimental: libgl1-mesa-dri-experimental N/A version.libgl1-mesa-glx: libgl1-mesa-glx 10.1.0-4ubuntu5 version.xserver-xorg-core: xserver-xorg-core 2:1.15.1-0ubuntu2 version.xserver-xorg-input-evdev: xserver-xorg-input-evdev 1:2.8.2-1ubuntu2 version.xserver-xorg-video-ati: xserver-xorg-video-ati 1:7.3.0-1ubuntu3 version.xserver-xorg-video-intel: xserver-xorg-video-intel 2:2.99.910-0ubuntu1 version.xserver-xorg-video-nouveau: xserver-xorg-video-nouveau 1:1.0.10-1ubuntu2 xserver.bootTime: Tue May 6 21:20:40 2014 xserver.configfile: default xserver.errors: xserver.logfile: /var/log/Xorg.0.log xserver.outputs: product id5558 vendor CMN xserver.version: 2:1.15.1-0ubuntu2 To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/xorg/+bug/1316873/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1607666] Re: sudo fails with host netgroup returned from freeipa
As part of https://www.ubuntu.com/usn/usn-3304-1/ , the sudo in yakkety- proposed has been superceded by sudo 1.8.16-0ubuntu3.2 in yakkety- security. Please upload a new version to yakkety-proposed that incorporates the security fix from the update. Thanks! -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to sudo in Ubuntu. https://bugs.launchpad.net/bugs/1607666 Title: sudo fails with host netgroup returned from freeipa Status in sudo package in Ubuntu: Fix Released Status in sudo source package in Xenial: Fix Released Status in sudo source package in Yakkety: Fix Committed Bug description: [Impact] Sudo currently fails to validate netgroups against host netgroups returned from the sss plugin, see https://fedorahosted.org/freeipa/ticket/6139 for the glory details. This was fixed in sudo 1.8.17 (https://www.sudo.ws/repos/sudo/rev/2eab4070dcf7 to be exact), which I'd very much like to see backported to Ubuntu 16.04. If possible, updating sudo completely to 1.8.17 would be nice, since there have been quite a few improvements with regards to sss and freeipa and it would be a shame if we could not benefit from them given that 16.04 is LTS. [Test case] install the update, test that sudo works on a freeipa installation that uses netgroups [Regression potential] I looked at upstream commits to sssd.c, and there were no commits that touch this area, so chance of regressions should be slim To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/sudo/+bug/1607666/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1546603] Re: Bluetooth mouse connects but doesn't work ("Unable to register GATT service")
the workaround works. i haven't tried newer version w/out the workaround. -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to bluez in Ubuntu. https://bugs.launchpad.net/bugs/1546603 Title: Bluetooth mouse connects but doesn't work ("Unable to register GATT service") Status in bluez package in Ubuntu: Incomplete Bug description: I have a bluetooth mouse that I can get to connect via the gnome bluetooth settings panel, but even after it's connected it doesn't move the pointer or register any clicks. the following shows up in the journal : $ $ journalctl -b 0 |grep bluetooth Feb 17 07:18:22 spiny bluetoothd[1009]: Bluetooth daemon 5.36 Feb 17 07:18:22 spiny bluetoothd[1009]: Starting SDP server Feb 17 07:18:22 spiny bluetoothd[1009]: Bluetooth management interface 1.10 initialized Feb 17 07:18:22 spiny bluetoothd[1009]: Failed to obtain handles for "Service Changed" characteristic Feb 17 07:18:22 spiny bluetoothd[1009]: Not enough free handles to register service Feb 17 07:18:22 spiny bluetoothd[1009]: Error adding Link Loss service Feb 17 07:18:22 spiny bluetoothd[1009]: Not enough free handles to register service Feb 17 07:18:22 spiny bluetoothd[1009]: Not enough free handles to register service Feb 17 07:18:22 spiny bluetoothd[1009]: Not enough free handles to register service Feb 17 07:18:22 spiny bluetoothd[1009]: Current Time Service could not be registered Feb 17 07:18:22 spiny bluetoothd[1009]: gatt-time-server: Input/output error (5) Feb 17 07:18:22 spiny bluetoothd[1009]: Not enough free handles to register service Feb 17 07:18:22 spiny bluetoothd[1009]: Not enough free handles to register service Feb 17 07:18:22 spiny bluetoothd[1009]: Sap driver initialization failed. Feb 17 07:18:22 spiny bluetoothd[1009]: sap-server: Operation not permitted (1) Feb 17 07:18:22 spiny NetworkManager[1062]: Loaded device plugin: NMBluezManager (/usr/lib/x86_64-linux-gnu/NetworkManager/libnm-device-plugin-bluetooth.so) Feb 17 07:18:24 spiny bluetoothd[1009]: Endpoint registered: sender=:1.42 path=/MediaEndpoint/A2DPSource Feb 17 07:18:24 spiny bluetoothd[1009]: Endpoint registered: sender=:1.42 path=/MediaEndpoint/A2DPSink Feb 17 07:18:42 spiny bluetoothd[1009]: Endpoint registered: sender=:1.71 path=/MediaEndpoint/A2DPSource Feb 17 07:18:42 spiny bluetoothd[1009]: Endpoint registered: sender=:1.71 path=/MediaEndpoint/A2DPSink Feb 17 07:18:42 spiny bluetoothd[1009]: RFCOMM server failed for Headset Voice gateway: rfcomm_bind: Address already in use (98) Feb 17 07:18:52 spiny gnome-bluetooth-panel.desktop[2717]: ** (gnome-control-center.real:2717): WARNING **: Ignoring launcher gufw (missing desktop file) Feb 17 07:18:52 spiny gnome-bluetooth-panel.desktop[2717]: ** (gnome-control-center.real:2717): WARNING **: Ignoring launcher landscape-client-settings (missing desktop file) Feb 17 07:18:52 spiny gnome-bluetooth-panel.desktop[2717]: ** (gnome-control-center.real:2717): WARNING **: Ignoring launcher language-selector (missing desktop file) Feb 17 07:18:52 spiny gnome-bluetooth-panel.desktop[2717]: ** (gnome-control-center.real:2717): WARNING **: Ignoring launcher ubuntuone-installer (missing desktop file) Feb 17 07:19:00 spiny gnome-bluetooth-panel.desktop[2717]: (gnome-control-center.real:2717): GLib-CRITICAL **: g_ascii_strdown: assertion 'str != NULL' failed Feb 17 07:19:01 spiny bluetoothd[1009]: No cache for F2:3F:5C:A1:F9:F7 Feb 17 07:19:06 spiny bluetoothd[1009]: Unable to register GATT service with handle 0x000c for device F2:3F:5C:A1:F9:F7 Feb 17 07:19:06 spiny bluetoothd[1009]: Unable to register GATT service with handle 0x001b for device F2:3F:5C:A1:F9:F7 Feb 17 07:19:06 spiny bluetoothd[1009]: Unable to register GATT service with handle 0x003f for device F2:3F:5C:A1:F9:F7 Feb 17 07:19:06 spiny bluetoothd[1009]: Report Map read failed: Attribute requires authentication before read/write Feb 17 07:19:06 spiny bluetoothd[1009]: Protocol Mode characteristic read failed: Attribute requires authentication before read/write Feb 17 07:19:06 spiny bluetoothd[1009]: HID Information read failed: Attribute requires authentication before read/write Feb 17 07:19:06 spiny bluetoothd[1009]: Read Report Reference descriptor failed: Attribute requires authentication before read/write Feb 17 07:19:06 spiny bluetoothd[1009]: Read Report Reference descriptor failed: Attribute requires authentication before read/write Feb 17 07:19:06 spiny bluetoothd[1009]: Read Report Reference descriptor failed: Attribute requires authentication before read/write Feb 17 07:19:06 spiny bluetoothd[1009]: Read Report Reference descriptor failed: Attribute requires authentication before read/write Feb 17 07:19:08 spiny gnome-bluetooth-panel.desktop[2717]: (gnome-control-center.real:2717): GLib-CRITICAL **: g_ascii_strdown: assertion 'str
[Touch-packages] [Bug 1694083] Re: package gconf2-common 3.2.6-3ubuntu7 failed to install/upgrade: subprocess installed post-installation script returned error exit status 128
Perhaps this may be a regression? I'm seeing this in 17-04 Zesty. $ lsb_release -a No LSB modules are available. Distributor ID: Ubuntu Description:Ubuntu 17.04 Release:17.04 Codename: zesty -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to gconf in Ubuntu. https://bugs.launchpad.net/bugs/1694083 Title: package gconf2-common 3.2.6-3ubuntu7 failed to install/upgrade: subprocess installed post-installation script returned error exit status 128 Status in gconf package in Ubuntu: Confirmed Bug description: i stuck in ubuntu sofware center for downloading aplication ProblemType: Package DistroRelease: Ubuntu 17.04 Package: gconf2-common 3.2.6-3ubuntu7 ProcVersionSignature: Ubuntu 4.10.0-21.23-generic 4.10.11 Uname: Linux 4.10.0-21-generic x86_64 ApportVersion: 2.20.4-0ubuntu4.1 Architecture: amd64 Date: Sun May 28 06:28:38 2017 ErrorMessage: subprocess installed post-installation script returned error exit status 128 InstallationDate: Installed on 2017-05-23 (4 days ago) InstallationMedia: Ubuntu 17.04 "Zesty Zapus" - Release amd64 (20170412) PackageArchitecture: all RelatedPackageVersions: dpkg 1.18.10ubuntu2 apt 1.4 SourcePackage: gconf Title: package gconf2-common 3.2.6-3ubuntu7 failed to install/upgrade: subprocess installed post-installation script returned error exit status 128 UpgradeStatus: No upgrade log present (probably fresh install) To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/gconf/+bug/1694083/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1605798] Re: Unity + Skylake + Hyper-V xf86EnableIOPorts: failed to set IOPL for I/O (Operation not permitted)
Thanks for the update, Mark. Would you say this bug is resolved? ** Changed in: xorg (Ubuntu) Importance: Undecided => Medium -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to xorg in Ubuntu. https://bugs.launchpad.net/bugs/1605798 Title: Unity + Skylake + Hyper-V xf86EnableIOPorts: failed to set IOPL for I/O (Operation not permitted) Status in xorg package in Ubuntu: Confirmed Bug description: Customer using Lenovo P50 (Skylake) and Surface Book (Skylake) laptops tried to start unity in a guest VM on Hyper-V. Kernel 4.4.0-31 started as expected, Hyper-V drivers loaded as expected including the framebuffer driver, plenty of memory and vCPUs allocated, but x.org fails with xf86EnableIOPorts: failed to set IOPL for I/O (Operation not permitted), resulting in "no screens found". However, when customer used KDE (kubuntu 16.04 with similar kernel) on these same systems got a UI as expected. Customer also has no issues on non-skylake laptop. No unexpected messages seen in dmesg and syslog. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/xorg/+bug/1605798/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1644975] Re: Resume from disk (swapfile) fails
I can confirm that the following statement in https://help.ubuntu.com/community/SwapFaq#Why_do_I_need_swap.3F is wrong: > The hibernation implementation currently used in Ubuntu, swsusp, needs a swap or suspend partition. It cannot use a swap file on an active file system. In fact, swsusp supports offsets just fine, and so does initramfs-tools - mostly. The only thing blocking hibernation to a swap file from working is that check in /usr/share/initramfs-tools/scripts/local- premount/resume script. It calls wait-for-root which returns "ext4" because no offset has been passed in. So the script will just assume that no hibernation occurred and continue without resuming. While I opted for simply removing the check, I strongly suspect that Ryo's patch will fix the issue just as well. -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to initramfs-tools in Ubuntu. https://bugs.launchpad.net/bugs/1644975 Title: Resume from disk (swapfile) fails Status in initramfs-tools package in Ubuntu: Confirmed Bug description: Well, hibernation with swap file doesn't work while hibernation with swap partition works perfectly fine with the exactly same configuration and hardware. The reason is that when resuming from swap file, initramfs script can't correctly detect the machine are hibernated from the last shut down. And I investigated the issue and found this patch solved https://bugs.launchpad.net/ubuntu/+source/initramfs- tools/+bug/554009/+attachment/1366060/+files/resume.patch) for the hibernate to work. And it isn't applied to the package. I'd like to help this is really applied to the official package. In short, my setup is swapfile inside the system filesystem (LUKS + LVM2 + ext4). Also, I roughly followed this tutorial to prepare this configurartion that: https://ubuntuforums.org/showthread.php?t=1042946 I've opening this bug because the original bug report is closed and getting no response... To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/initramfs-tools/+bug/1644975/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1689825] Re: gnome-keyring not unlocked on boot
Same problem here: Google-chrome is affected. Skypeforlinux doesn't remember the password anymore UnityMail is affected -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to libgnome-keyring in Ubuntu. https://bugs.launchpad.net/bugs/1689825 Title: gnome-keyring not unlocked on boot Status in gnome-keyring package in Ubuntu: Confirmed Status in libgnome-keyring package in Ubuntu: Confirmed Bug description: 1) Release: 16.04.2 2) gnome-keyring: 3.18.3-0ubuntu2 3) Login. gnome-keyring unlocks "login" features including for google chrome 4) gnome-keyring is not unlocked, chrome takes 2 minutes to open and with no secure password features(sync) functioning. For the past couple days, chrome on Ubuntu 16.04 takes a REALLY long time (maybe 2 minutes) to start. Once chrome is started, I am not able to sync and any secure password features are broken. I found out this is due to gnome-keyring not being unlocked at login. There's also no way to unlock the "login" portion of the keyring from the running daemon by default. I have to kill the gnome-keyring process and start without "--login" as a parameter. Then the "login" section shows up which I'm able to unlock. From there chrome starts up instantly but asks the following: Enter password to unlock your login keyring The login keyring did not get unlocked when you logged into your computer After that, all of it's sync and secure features are functional. Starting google-chrome-stable from a command line at boot without running the above workaround shows the following error messages: Gkr-Message: secret service operation failed: Did not receive a reply. Possible causes include: the remote application did not send a reply, the message bus security policy blocked the reply, the reply timeout expired, or the network connection was broken. Gkr-Message: secret service operation failed: Did not receive a reply. Possible causes include: the remote application did not send a reply, the message bus security policy blocked the reply, the reply timeout expired, or the network connection was broken. [4364:4393:0510/100407.740292:ERROR:token_service_table.cc(130)] Failed to decrypt token for service AccountId-108842767310111573264 [4364:4445:0510/100407.740292:ERROR:gcm_store_impl.cc(929)] Failed to restore security token. ProblemType: Bug DistroRelease: Ubuntu 16.04 Package: gnome-keyring 3.18.3-0ubuntu2 ProcVersionSignature: Ubuntu 4.8.0-52.55~16.04.1-generic 4.8.17 Uname: Linux 4.8.0-52-generic x86_64 ApportVersion: 2.20.1-0ubuntu2.5 Architecture: amd64 CurrentDesktop: GNOME-Flashback:Unity Date: Wed May 10 09:43:37 2017 SourcePackage: gnome-keyring UpgradeStatus: No upgrade log present (probably fresh install) To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/gnome-keyring/+bug/1689825/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 91867] Re: [PATCH] allow resume from LUKS encrypted swap partition
By now (definitely xenial and above), this functionality has been implemented via the cryptsetup package. It will take care of unlocking resume devices so that one can simply use "resume=/dev/mapper/foo" for the parameter. -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to initramfs-tools in Ubuntu. https://bugs.launchpad.net/bugs/91867 Title: [PATCH] allow resume from LUKS encrypted swap partition Status in initramfs-tools package in Ubuntu: Incomplete Bug description: Binary package hint: initramfs-tools The attached patch allows to suspend and resume to a LUKS encrypted swap partition. This means that all data (including passwords) that would otherwise be written to disk in plain text will be encrypted. To make use of the patch, you must * create a LUKS encrypted partition * activate the device with cryptsetup luksOpen * run mkswap on it and enter it in fstab as swap * change your kernel's resume=* line to resume=LUKS=/name/of/harddiskpartition:devicemapper name (actual process depends on the bootloader used) For example resume=LUKS=/dev/hda3:cryptswap * then run update-initramfs to build a new initramfs. You will then be asked to provide the password for the swap partition upon boot and the script will try to resume from it. If it can't find swsuspend signatures, boot will continue. The script will also automatically setup correct suspend device for swsuspend. I have extensively tested this on Feisty. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/initramfs-tools/+bug/91867/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1694457] [NEW] Unable to Open Files With Totem After Upgrade to 17.04
Public bug reported: I can't open .mkv and .mp3 files with Totem. This behavior appeared after upgrade to 17.04. After I double click a file a loading indication in the title bar appears. After a few seconds it simply disappears and the player is not showing. If I start a Terminal and type "totem " the file is opened normally. >> lsb_release -rd Description:Ubuntu 17.04 Release:17.04 >> apt-cache policy totem totem: Installed: 3.24.0-0ubuntu1 Candidate: 3.24.0-0ubuntu1 Version table: *** 3.24.0-0ubuntu1 500 500 http://archive.ubuntu.com/ubuntu zesty/main amd64 Packages 100 /var/lib/dpkg/status ProblemType: Bug DistroRelease: Ubuntu 17.04 Package: libgstreamer1.0-0 1.10.4-1 ProcVersionSignature: Ubuntu 4.10.0-21.23-generic 4.10.11 Uname: Linux 4.10.0-21-generic x86_64 ApportVersion: 2.20.4-0ubuntu4.1 Architecture: amd64 CurrentDesktop: GNOME Date: Tue May 30 17:33:05 2017 InstallationDate: Installed on 2015-06-17 (713 days ago) InstallationMedia: Ubuntu-GNOME 15.04 "Vivid Vervet" - Release amd64 (20150422) SourcePackage: gstreamer1.0 UpgradeStatus: Upgraded to zesty on 2017-04-17 (42 days ago) ** Affects: gstreamer1.0 (Ubuntu) Importance: Undecided Status: New ** Tags: amd64 apport-bug third-party-packages zesty -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to gstreamer1.0 in Ubuntu. https://bugs.launchpad.net/bugs/1694457 Title: Unable to Open Files With Totem After Upgrade to 17.04 Status in gstreamer1.0 package in Ubuntu: New Bug description: I can't open .mkv and .mp3 files with Totem. This behavior appeared after upgrade to 17.04. After I double click a file a loading indication in the title bar appears. After a few seconds it simply disappears and the player is not showing. If I start a Terminal and type "totem " the file is opened normally. >> lsb_release -rd Description: Ubuntu 17.04 Release: 17.04 >> apt-cache policy totem totem: Installed: 3.24.0-0ubuntu1 Candidate: 3.24.0-0ubuntu1 Version table: *** 3.24.0-0ubuntu1 500 500 http://archive.ubuntu.com/ubuntu zesty/main amd64 Packages 100 /var/lib/dpkg/status ProblemType: Bug DistroRelease: Ubuntu 17.04 Package: libgstreamer1.0-0 1.10.4-1 ProcVersionSignature: Ubuntu 4.10.0-21.23-generic 4.10.11 Uname: Linux 4.10.0-21-generic x86_64 ApportVersion: 2.20.4-0ubuntu4.1 Architecture: amd64 CurrentDesktop: GNOME Date: Tue May 30 17:33:05 2017 InstallationDate: Installed on 2015-06-17 (713 days ago) InstallationMedia: Ubuntu-GNOME 15.04 "Vivid Vervet" - Release amd64 (20150422) SourcePackage: gstreamer1.0 UpgradeStatus: Upgraded to zesty on 2017-04-17 (42 days ago) To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/gstreamer1.0/+bug/1694457/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1693900] Re: apt-get update should return exit code != 0 on error
Hmmm, IMHO 'Err:' and 'W: Failed to fetch' indicate, that it was not able to update properly and thus the result of the operation is unreliable. So its like "your connection is secured, but may be not". I guess most people wouldn't do any financial transaction when reading this ... ;-) -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to apt in Ubuntu. https://bugs.launchpad.net/bugs/1693900 Title: apt-get update should return exit code != 0 on error Status in apt package in Ubuntu: Triaged Bug description: When running 'apt-get update' (e.g. on a container install post- install script), apt-get return with exit code 0, even so it wasn't able to "update" properly. E.g.: + apt-get update Err:1 http://de.archive.ubuntu.com/ubuntu xenial InRelease Temporary failure resolving 'de.archive.ubuntu.com' Err:2 http://security.ubuntu.com/ubuntu xenial-security InRelease Temporary failure resolving 'security.ubuntu.com' Err:3 http://de.archive.ubuntu.com/ubuntu xenial-updates InRelease Temporary failure resolving 'de.archive.ubuntu.com' Reading package lists... Done W: Failed to fetch http://de.archive.ubuntu.com/ubuntu/dists/xenial/InRelease Temporary failure resolving 'de.archive.ubuntu.com' W: Failed to fetch http://de.archive.ubuntu.com/ubuntu/dists/xenial-updates/InRelease Temporary failure resolving 'de.archive.ubuntu.com' W: Failed to fetch http://security.ubuntu.com/ubuntu/dists/xenial-security/InRelease Temporary failure resolving 'security.ubuntu.com' W: Some index files failed to download. They have been ignored, or old ones used instead. It should be corrected to return useful exit code, so that scripts can take the appropriate actions ... To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/apt/+bug/1693900/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1670036] Re: Misapplied patches in 4.0.6-2ubuntu0.1 break reading and writing JPEG compressed files
This bug was fixed in the package tiff - 4.0.3-7ubuntu0.7 --- tiff (4.0.3-7ubuntu0.7) trusty-security; urgency=medium * SECURITY REGRESSION: JPEG tiff read and write issue due to misapplied patches (LP: #1670036) - debian/patches/CVE-2016-9297_and_CVE-2016-9448_correct.patch: replace two previous patches with one that applies fix to correct location. - Thanks to John Cupitt and Even Rouault -- Marc DeslauriersMon, 29 May 2017 07:35:17 -0400 ** Changed in: tiff (Ubuntu Trusty) Status: Confirmed => Fix Released -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to tiff in Ubuntu. https://bugs.launchpad.net/bugs/1670036 Title: Misapplied patches in 4.0.6-2ubuntu0.1 break reading and writing JPEG compressed files Status in LibTIFF: New Status in tiff package in Ubuntu: Invalid Status in tiff source package in Trusty: Fix Released Status in tiff source package in Xenial: Fix Released Status in tiff source package in Yakkety: Fix Released Bug description: The patches applied to libtiff 4.0.6 in 4.0.6-2ubuntu01 seem to break JPEG tiff read and write. To reproduce: $ tiffcp -c jpeg k2a.tif x.tif (where k2a.tif is a simple uncompressed RGB strip tiff) appears to work. However, x.tif, the output, will now not read without warnings: $ tiffcp x.tif y.tif TIFFFetchNormalTag: Warning, ASCII value for tag "JPEGTables" does not end in null byte. Forcing it to be null. JPEGLib: Warning, Premature end of JPEG file. This was working fine until a couple of days ago, so I guess it's one of the most recent patches. Some packages using libtiff seem to be broken too. For example, openslide, which uses libtiff to load jp2k-compressed slide images, is no longer working: $ openslide-write-png CMU-1-Small-Region.svs 0 0 0 100 100 x.png TIFFFetchNormalTag: Warning, ASCII value for tag "JPEGTables" does not end in null byte. Forcing it to be null. TIFFFetchNormalTag: Warning, ASCII value for tag "JPEGTables" does not end in null byte. Forcing it ... repeats 8 more times openslide-write-png: Premature end of JPEG file and x.png is not a valid PNG image. The test .svs image may be downloaded here: http://openslide.cs.cmu.edu/download/openslide-testdata/Aperio/ To manage notifications about this bug go to: https://bugs.launchpad.net/libtiff/+bug/1670036/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1670036] Re: Misapplied patches in 4.0.6-2ubuntu0.1 break reading and writing JPEG compressed files
This bug was fixed in the package tiff - 4.0.6-2ubuntu0.2 --- tiff (4.0.6-2ubuntu0.2) yakkety-security; urgency=medium * SECURITY REGRESSION: JPEG tiff read and write issue due to misapplied patches (LP: #1670036) - debian/patches/CVE-2016-9297_and_CVE-2016-9448_correct.patch: replace two previous patches with one that applies fix to correct location. - Thanks to John Cupitt and Even Rouault -- Marc DeslauriersMon, 29 May 2017 07:29:06 -0400 ** Changed in: tiff (Ubuntu Yakkety) Status: Confirmed => Fix Released -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to tiff in Ubuntu. https://bugs.launchpad.net/bugs/1670036 Title: Misapplied patches in 4.0.6-2ubuntu0.1 break reading and writing JPEG compressed files Status in LibTIFF: New Status in tiff package in Ubuntu: Invalid Status in tiff source package in Trusty: Fix Released Status in tiff source package in Xenial: Fix Released Status in tiff source package in Yakkety: Fix Released Bug description: The patches applied to libtiff 4.0.6 in 4.0.6-2ubuntu01 seem to break JPEG tiff read and write. To reproduce: $ tiffcp -c jpeg k2a.tif x.tif (where k2a.tif is a simple uncompressed RGB strip tiff) appears to work. However, x.tif, the output, will now not read without warnings: $ tiffcp x.tif y.tif TIFFFetchNormalTag: Warning, ASCII value for tag "JPEGTables" does not end in null byte. Forcing it to be null. JPEGLib: Warning, Premature end of JPEG file. This was working fine until a couple of days ago, so I guess it's one of the most recent patches. Some packages using libtiff seem to be broken too. For example, openslide, which uses libtiff to load jp2k-compressed slide images, is no longer working: $ openslide-write-png CMU-1-Small-Region.svs 0 0 0 100 100 x.png TIFFFetchNormalTag: Warning, ASCII value for tag "JPEGTables" does not end in null byte. Forcing it to be null. TIFFFetchNormalTag: Warning, ASCII value for tag "JPEGTables" does not end in null byte. Forcing it ... repeats 8 more times openslide-write-png: Premature end of JPEG file and x.png is not a valid PNG image. The test .svs image may be downloaded here: http://openslide.cs.cmu.edu/download/openslide-testdata/Aperio/ To manage notifications about this bug go to: https://bugs.launchpad.net/libtiff/+bug/1670036/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1694439] Re: Nano corrupts its buffer when adding newlines
Marked this as invalid because it was my terminal that had gone crazy. ** Description changed: Steps to reproduce - 1) Open nano + 1) Open nano in a terminal (Ubuntu's default terminal) 2) Write, let's say, 10 lines of text. Content doesn't matter 3) Go to the beginning of, for example, line 5 and continue hitting enter What should happen: - New empty lines are added and the remaining lines are pushed down What happens instead: - Only a couple of new lines are added then the cursor just starts to move over the lines. Trying to add new lines now randomly sometimes works, sometimes doesn't. Usually the whole buffer gets messed up and also deleting lines does unexpected things ProblemType: Bug DistroRelease: Ubuntu 16.04 Package: nano 2.5.3-2ubuntu2 ProcVersionSignature: Ubuntu 4.4.0-65.86-generic 4.4.49 Uname: Linux 4.4.0-65-generic x86_64 ApportVersion: 2.20.1-0ubuntu2.5 Architecture: amd64 CurrentDesktop: Unity Date: Tue May 30 16:19:26 2017 InstallationDate: Installed on 2016-09-13 (259 days ago) InstallationMedia: Ubuntu 16.04.1 LTS "Xenial Xerus" - Release amd64 (20160719) SourcePackage: nano UpgradeStatus: No upgrade log present (probably fresh install) ** Changed in: nano (Ubuntu) Status: New => Invalid -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to nano in Ubuntu. https://bugs.launchpad.net/bugs/1694439 Title: Nano corrupts its buffer when adding newlines Status in nano package in Ubuntu: Invalid Bug description: Steps to reproduce 1) Open nano in a terminal (Ubuntu's default terminal) 2) Write, let's say, 10 lines of text. Content doesn't matter 3) Go to the beginning of, for example, line 5 and continue hitting enter What should happen: - New empty lines are added and the remaining lines are pushed down What happens instead: - Only a couple of new lines are added then the cursor just starts to move over the lines. Trying to add new lines now randomly sometimes works, sometimes doesn't. Usually the whole buffer gets messed up and also deleting lines does unexpected things ProblemType: Bug DistroRelease: Ubuntu 16.04 Package: nano 2.5.3-2ubuntu2 ProcVersionSignature: Ubuntu 4.4.0-65.86-generic 4.4.49 Uname: Linux 4.4.0-65-generic x86_64 ApportVersion: 2.20.1-0ubuntu2.5 Architecture: amd64 CurrentDesktop: Unity Date: Tue May 30 16:19:26 2017 InstallationDate: Installed on 2016-09-13 (259 days ago) InstallationMedia: Ubuntu 16.04.1 LTS "Xenial Xerus" - Release amd64 (20160719) SourcePackage: nano UpgradeStatus: No upgrade log present (probably fresh install) To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/nano/+bug/1694439/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1694438] Re: [16.04] Cannot download packages whilst offline - when using ifupdown
This also affects PackageKit 1.0.1-2 in Debian Jessie. -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to packagekit in Ubuntu. https://bugs.launchpad.net/bugs/1694438 Title: [16.04] Cannot download packages whilst offline - when using ifupdown Status in packagekit package in Ubuntu: Fix Released Status in packagekit source package in Xenial: New Bug description: I am using 16.04 with the main ethernet interface being managed by ifupdown, and others by NetworkManager. Apparently PK's pk_network_get_network_state() does not properly recognize this and thinks it is offline: # pkcon update Getting updates [=] [...] Fatal error: Cannot download packages whilst offline A workaround is to change /etc/NetworkManager/NetworkManager.conf [ifupdown] managed= from "false" to "true", then "eth0" appears in "nmcli d" and PackageKit is happy. In 17.04 this is no problem any more, PackageKit works out of the box with the same ifupdown configuration and managed=false. Interestingly, "nmcli d" shows eth0ethernet unmanaged -- there, while eth0 is entirely absent in 16.04. There doesn't seem to be an nmcli command to show what PackageKit looks at; the closest is "nmcli g" but in all three cases above that says STATE CONNECTIVITY WIFI-HW WIFI WWAN-HW WWAN connected full enabled enabled enabled enabled To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/packagekit/+bug/1694438/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1670036] Re: Misapplied patches in 4.0.6-2ubuntu0.1 break reading and writing JPEG compressed files
This bug was fixed in the package tiff - 4.0.6-1ubuntu0.2 --- tiff (4.0.6-1ubuntu0.2) xenial-security; urgency=medium * SECURITY REGRESSION: JPEG tiff read and write issue due to misapplied patches (LP: #1670036) - debian/patches/CVE-2016-9297_and_CVE-2016-9448_correct.patch: replace two previous patches with one that applies fix to correct location. - Thanks to John Cupitt and Even Rouault -- Marc DeslauriersMon, 29 May 2017 07:33:56 -0400 ** Changed in: tiff (Ubuntu Xenial) Status: Confirmed => Fix Released -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to tiff in Ubuntu. https://bugs.launchpad.net/bugs/1670036 Title: Misapplied patches in 4.0.6-2ubuntu0.1 break reading and writing JPEG compressed files Status in LibTIFF: New Status in tiff package in Ubuntu: Invalid Status in tiff source package in Trusty: Confirmed Status in tiff source package in Xenial: Fix Released Status in tiff source package in Yakkety: Confirmed Bug description: The patches applied to libtiff 4.0.6 in 4.0.6-2ubuntu01 seem to break JPEG tiff read and write. To reproduce: $ tiffcp -c jpeg k2a.tif x.tif (where k2a.tif is a simple uncompressed RGB strip tiff) appears to work. However, x.tif, the output, will now not read without warnings: $ tiffcp x.tif y.tif TIFFFetchNormalTag: Warning, ASCII value for tag "JPEGTables" does not end in null byte. Forcing it to be null. JPEGLib: Warning, Premature end of JPEG file. This was working fine until a couple of days ago, so I guess it's one of the most recent patches. Some packages using libtiff seem to be broken too. For example, openslide, which uses libtiff to load jp2k-compressed slide images, is no longer working: $ openslide-write-png CMU-1-Small-Region.svs 0 0 0 100 100 x.png TIFFFetchNormalTag: Warning, ASCII value for tag "JPEGTables" does not end in null byte. Forcing it to be null. TIFFFetchNormalTag: Warning, ASCII value for tag "JPEGTables" does not end in null byte. Forcing it ... repeats 8 more times openslide-write-png: Premature end of JPEG file and x.png is not a valid PNG image. The test .svs image may be downloaded here: http://openslide.cs.cmu.edu/download/openslide-testdata/Aperio/ To manage notifications about this bug go to: https://bugs.launchpad.net/libtiff/+bug/1670036/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1694438] [NEW] [16.04] Cannot download packages whilst offline - when using ifupdown
Public bug reported: I am using 16.04 with the main ethernet interface being managed by ifupdown, and others by NetworkManager. Apparently PK's pk_network_get_network_state() does not properly recognize this and thinks it is offline: # pkcon update Getting updates [=] [...] Fatal error: Cannot download packages whilst offline A workaround is to change /etc/NetworkManager/NetworkManager.conf [ifupdown] managed= from "false" to "true", then "eth0" appears in "nmcli d" and PackageKit is happy. In 17.04 this is no problem any more, PackageKit works out of the box with the same ifupdown configuration and managed=false. Interestingly, "nmcli d" shows eth0ethernet unmanaged -- there, while eth0 is entirely absent in 16.04. There doesn't seem to be an nmcli command to show what PackageKit looks at; the closest is "nmcli g" but in all three cases above that says STATE CONNECTIVITY WIFI-HW WIFI WWAN-HW WWAN connected full enabled enabled enabled enabled ** Affects: packagekit (Ubuntu) Importance: Undecided Status: Fix Released ** Affects: packagekit (Ubuntu Xenial) Importance: Undecided Status: New ** Also affects: packagekit (Ubuntu Xenial) Importance: Undecided Status: New ** Changed in: packagekit (Ubuntu) Status: New => Fix Released -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to packagekit in Ubuntu. https://bugs.launchpad.net/bugs/1694438 Title: [16.04] Cannot download packages whilst offline - when using ifupdown Status in packagekit package in Ubuntu: Fix Released Status in packagekit source package in Xenial: New Bug description: I am using 16.04 with the main ethernet interface being managed by ifupdown, and others by NetworkManager. Apparently PK's pk_network_get_network_state() does not properly recognize this and thinks it is offline: # pkcon update Getting updates [=] [...] Fatal error: Cannot download packages whilst offline A workaround is to change /etc/NetworkManager/NetworkManager.conf [ifupdown] managed= from "false" to "true", then "eth0" appears in "nmcli d" and PackageKit is happy. In 17.04 this is no problem any more, PackageKit works out of the box with the same ifupdown configuration and managed=false. Interestingly, "nmcli d" shows eth0ethernet unmanaged -- there, while eth0 is entirely absent in 16.04. There doesn't seem to be an nmcli command to show what PackageKit looks at; the closest is "nmcli g" but in all three cases above that says STATE CONNECTIVITY WIFI-HW WIFI WWAN-HW WWAN connected full enabled enabled enabled enabled To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/packagekit/+bug/1694438/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1694439] [NEW] Nano corrupts its buffer when adding newlines
Public bug reported: Steps to reproduce 1) Open nano 2) Write, let's say, 10 lines of text. Content doesn't matter 3) Go to the beginning of, for example, line 5 and continue hitting enter What should happen: - New empty lines are added and the remaining lines are pushed down What happens instead: - Only a couple of new lines are added then the cursor just starts to move over the lines. Trying to add new lines now randomly sometimes works, sometimes doesn't. Usually the whole buffer gets messed up and also deleting lines does unexpected things ProblemType: Bug DistroRelease: Ubuntu 16.04 Package: nano 2.5.3-2ubuntu2 ProcVersionSignature: Ubuntu 4.4.0-65.86-generic 4.4.49 Uname: Linux 4.4.0-65-generic x86_64 ApportVersion: 2.20.1-0ubuntu2.5 Architecture: amd64 CurrentDesktop: Unity Date: Tue May 30 16:19:26 2017 InstallationDate: Installed on 2016-09-13 (259 days ago) InstallationMedia: Ubuntu 16.04.1 LTS "Xenial Xerus" - Release amd64 (20160719) SourcePackage: nano UpgradeStatus: No upgrade log present (probably fresh install) ** Affects: nano (Ubuntu) Importance: Undecided Status: New ** Tags: amd64 apport-bug xenial -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to nano in Ubuntu. https://bugs.launchpad.net/bugs/1694439 Title: Nano corrupts its buffer when adding newlines Status in nano package in Ubuntu: New Bug description: Steps to reproduce 1) Open nano 2) Write, let's say, 10 lines of text. Content doesn't matter 3) Go to the beginning of, for example, line 5 and continue hitting enter What should happen: - New empty lines are added and the remaining lines are pushed down What happens instead: - Only a couple of new lines are added then the cursor just starts to move over the lines. Trying to add new lines now randomly sometimes works, sometimes doesn't. Usually the whole buffer gets messed up and also deleting lines does unexpected things ProblemType: Bug DistroRelease: Ubuntu 16.04 Package: nano 2.5.3-2ubuntu2 ProcVersionSignature: Ubuntu 4.4.0-65.86-generic 4.4.49 Uname: Linux 4.4.0-65-generic x86_64 ApportVersion: 2.20.1-0ubuntu2.5 Architecture: amd64 CurrentDesktop: Unity Date: Tue May 30 16:19:26 2017 InstallationDate: Installed on 2016-09-13 (259 days ago) InstallationMedia: Ubuntu 16.04.1 LTS "Xenial Xerus" - Release amd64 (20160719) SourcePackage: nano UpgradeStatus: No upgrade log present (probably fresh install) To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/nano/+bug/1694439/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1693900] Re: apt-get update should return exit code != 0 on error
Well, it did not fail, it re-used the existing information. Transient network errors do not cause the update to fail, because they are expected to be temporary. It's always been like this. I'm open to possibly changing this, but such a change could cause huge issues. ** Changed in: apt (Ubuntu) Importance: Undecided => Wishlist ** Changed in: apt (Ubuntu) Status: New => Triaged ** Changed in: apt (Ubuntu) Importance: Wishlist => Low ** Changed in: apt (Ubuntu) Importance: Low => Wishlist -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to apt in Ubuntu. https://bugs.launchpad.net/bugs/1693900 Title: apt-get update should return exit code != 0 on error Status in apt package in Ubuntu: Triaged Bug description: When running 'apt-get update' (e.g. on a container install post- install script), apt-get return with exit code 0, even so it wasn't able to "update" properly. E.g.: + apt-get update Err:1 http://de.archive.ubuntu.com/ubuntu xenial InRelease Temporary failure resolving 'de.archive.ubuntu.com' Err:2 http://security.ubuntu.com/ubuntu xenial-security InRelease Temporary failure resolving 'security.ubuntu.com' Err:3 http://de.archive.ubuntu.com/ubuntu xenial-updates InRelease Temporary failure resolving 'de.archive.ubuntu.com' Reading package lists... Done W: Failed to fetch http://de.archive.ubuntu.com/ubuntu/dists/xenial/InRelease Temporary failure resolving 'de.archive.ubuntu.com' W: Failed to fetch http://de.archive.ubuntu.com/ubuntu/dists/xenial-updates/InRelease Temporary failure resolving 'de.archive.ubuntu.com' W: Failed to fetch http://security.ubuntu.com/ubuntu/dists/xenial-security/InRelease Temporary failure resolving 'security.ubuntu.com' W: Some index files failed to download. They have been ignored, or old ones used instead. It should be corrected to return useful exit code, so that scripts can take the appropriate actions ... To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/apt/+bug/1693900/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1694331] Re: "internal error" popup on login
Christopher, I have since upgraded that Dell Precision to 17.04 and while I still often get the error popup on that computer I cannot confirm that it is actually Xorg that crashed, because now that I looked, the crash popup on 17.04 today was about some unrelated software (unity-settings-something) so I can't really be sure if I have ever seen Xorg crash on 17.04. It used to be Xorg when the Dell computer had 16.10, though. The UX32VD that still runs 16.10 continues to show the Xorg crash from time to time (but not nearly at every boot). Also I checked with my co-workers and those (2) who run 16.10 all regularly see an error popup but none can verify that it's still actually about Xorg (it happens frequently enough that no-one bothers to look anymore). A co-worker who's still on 16.04 says he hasn't seen the error. So in summary I can only definitely say that 16.10 shows that Xorg crash and that it has happened on more or less every computer I or my co- workers have used with 16.10. -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to xorg in Ubuntu. https://bugs.launchpad.net/bugs/1694331 Title: "internal error" popup on login Status in xorg package in Ubuntu: Incomplete Bug description: Sometimes (not very often), Ubuntu shows an error popup immediately after login (after power-on) that says Xorg has crashed. No other ill effects have been noticed, everything works normally after that. The automatic error reporting does not go through because of "UnreportableReason: Invalid core dump: BFD: Warning /tmp/apport_core_5n7s8i3d is truncated: expected core file size >= 40902656, found: 21037056." I was asked by Christopher M. Penalver in Bug 1426596 to submit a new bug using "ubuntu-bug xorg" when the error appeared. This is that report, although the computer I used now to generate the report is not the same as I mentioned in the original bug (I've seen the same issue on more or less all computers I've used and IIRC from at least 16.04 to 17.04). ProblemType: Bug DistroRelease: Ubuntu 16.10 Package: xorg 1:7.7+13ubuntu4 ProcVersionSignature: Ubuntu 4.8.0-53.56-generic 4.8.17 Uname: Linux 4.8.0-53-generic x86_64 .tmp.unity_support_test.0: ApportVersion: 2.20.3-0ubuntu8.3 Architecture: amd64 CompizPlugins: [core,composite,opengl,compiztoolbox,decor,vpswitch,snap,mousepoll,resize,place,move,wall,grid,regex,imgpng,session,gnomecompat,animation,fade,unitymtgrabhandles,workarounds,scale,expo,ezoom,unityshell] CompositorRunning: compiz CompositorUnredirectDriverBlacklist: '(nouveau|Intel).*Mesa 8.0' CompositorUnredirectFSW: true CurrentDesktop: Unity Date: Mon May 29 22:31:18 2017 DistUpgraded: 2017-04-15 01:32:04,429 DEBUG /openCache(), new cache size 85680 DistroCodename: yakkety DistroVariant: ubuntu DkmsStatus: bbswitch, 0.8, 4.8.0-52-generic, x86_64: installed bbswitch, 0.8, 4.8.0-53-generic, x86_64: installed ExtraDebuggingInterest: Yes GraphicsCard: Intel Corporation 3rd Gen Core processor Graphics Controller [8086:0166] (rev 09) (prog-if 00 [VGA controller]) Subsystem: ASUSTeK Computer Inc. 3rd Gen Core processor Graphics Controller [1043:1507] InstallationDate: Installed on 2014-04-18 (1137 days ago) InstallationMedia: Ubuntu 14.04 LTS "Trusty Tahr" - Release amd64 (20140417) MachineType: ASUSTeK COMPUTER INC. UX32VD ProcKernelCmdLine: BOOT_IMAGE=/@/boot/vmlinuz-4.8.0-53-generic.efi.signed root=UUID=959fa127-2d15-48a5-9fa0-70f918fab2ad ro rootflags=subvol=@ quiet splash pcie_aspm=force nmi_watchdog=0 vt.handoff=7 SourcePackage: xorg UpgradeStatus: Upgraded to yakkety on 2017-04-14 (44 days ago) dmi.bios.date: 01/29/2013 dmi.bios.vendor: American Megatrends Inc. dmi.bios.version: UX32VD.214 dmi.board.asset.tag: ATN12345678901234567 dmi.board.name: UX32VD dmi.board.vendor: ASUSTeK COMPUTER INC. dmi.board.version: 1.0 dmi.chassis.asset.tag: No Asset Tag dmi.chassis.type: 10 dmi.chassis.vendor: ASUSTeK COMPUTER INC. dmi.chassis.version: 1.0 dmi.modalias: dmi:bvnAmericanMegatrendsInc.:bvrUX32VD.214:bd01/29/2013:svnASUSTeKCOMPUTERINC.:pnUX32VD:pvr1.0:rvnASUSTeKCOMPUTERINC.:rnUX32VD:rvr1.0:cvnASUSTeKCOMPUTERINC.:ct10:cvr1.0: dmi.product.name: UX32VD dmi.product.version: 1.0 dmi.sys.vendor: ASUSTeK COMPUTER INC. version.compiz: compiz 1:0.9.13.0+16.10.20160818.2-0ubuntu2 version.ia32-libs: ia32-libs N/A version.libdrm2: libdrm2 2.4.70-1 version.libgl1-mesa-dri: libgl1-mesa-dri 12.0.6-0ubuntu0.16.10.1 version.libgl1-mesa-dri-experimental: libgl1-mesa-dri-experimental N/A version.libgl1-mesa-glx: libgl1-mesa-glx 12.0.6-0ubuntu0.16.10.1 version.xserver-xorg-core: xserver-xorg-core 2:1.18.4-1ubuntu6.1 version.xserver-xorg-input-evdev: xserver-xorg-input-evdev 1:2.10.2-1ubuntu1 version.xserver-xorg-video-ati: xserver-xorg-video-ati 1:7.7.1-1 version.xserver-xorg-video-intel:
[Touch-packages] [Bug 1691991] Re: Xorg Segmentation fault on Hisilicon D05 board (arm64)
For the mainline kernel (general kernel from Ubuntu 16.04.02 AM64) was not tested in case we are not supported for Hisilicon D05 board. We also do some basic fbdev and modesetting testing on this kerenl by pass Xserver, it seems works well and so we tend to think this is caused by Xorg or driver of Xorg. -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to xorg in Ubuntu. https://bugs.launchpad.net/bugs/1691991 Title: Xorg Segmentation fault on Hisilicon D05 board (arm64) Status in xorg package in Ubuntu: New Bug description: ubuntu@ubuntu:~$ sudo /usr/lib/xorg/Xorg [sudo] password for ubuntu: X.Org X Server 1.18.4 Release Date: 2016-07-19 X Protocol Version 11, Revision 0 Build Operating System: Linux 4.4.0-45-generic aarch64 Ubuntu Current Operating System: Linux ubuntu 4.10.0-20.22-generic #22+pearl.2-Ubuntu SMP Thu Apr 27 20:23:08 UTC 2017 aarch64 Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.10.0-20.22-generic root=UUID=eee681c5-04ce-4cd0-a004-cae6717961ce ro debug earlycon=pl011,mmio,0x602B console=tty0 Build Date: 02 November 2016 10:05:28PM xorg-server 2:1.18.4-0ubuntu0.2 (For technical support please see http://www.ubuntu.com/support) Current version of pixman: 0.33.6 Before reporting problems, check http://wiki.x.org to make sure that you have the latest version. Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. (==) Log file: "/var/log/Xorg.0.log", Time: Fri May 19 18:10:13 2017 (==) Using system config directory "/usr/share/X11/xorg.conf.d" pci id for fd 10: 19e5:1711, driver (null) EGL_MESA_drm_image required. (EE) (EE) Backtrace: (EE) 0: /usr/lib/xorg/Xorg (xorg_backtrace+0x58) [0xd7f1cc48] (EE) (EE) Segmentation fault at address 0xa0 (EE) Fatal server error: (EE) Caught signal 11 (Segmentation fault). Server aborting (EE) (EE) Please consult the The X.Org Foundation support at http://wiki.x.org for help. (EE) Please also check the log file at "/var/log/Xorg.0.log" for additional information. (EE) (EE) Server terminated with error (1). Closing log file. Aborted (core dumped) ubuntu@ubuntu:~$ To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/xorg/+bug/1691991/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1691991] Re: Xorg Segmentation fault on Hisilicon D05 board (arm64)
The below is testing after remove of "xserver-xorg-video-fbdev package" ubuntu@ubuntu:/usr/lib/xorg/modules/drivers$ sudo /usr/lib/xorg/Xorg X.Org X Server 1.18.4 Release Date: 2016-07-19 X Protocol Version 11, Revision 0 Build Operating System: Linux 4.4.0-45-generic aarch64 Ubuntu Current Operating System: Linux ubuntu 4.10.0-20.22-generic #22+pearl.2-Ubuntu SMP Thu Apr 27 20:23:08 UTC 2017 aarch64 Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.10.0-20.22-generic root=UUID=eee681c5-04ce-4cd0-a004-cae6717961ce ro debug earlycon=pl011,mmio,0x602B console=tty0 Build Date: 02 November 2016 10:05:28PM xorg-server 2:1.18.4-0ubuntu0.2 (For technical support please see http://www.ubuntu.com/support) Current version of pixman: 0.33.6 Before reporting problems, check http://wiki.x.org to make sure that you have the latest version. Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. (==) Log file: "/var/log/Xorg.0.log", Time: Tue May 30 17:45:40 2017 (==) Using system config directory "/usr/share/X11/xorg.conf.d" (EE) Fatal server error: (EE) no screens found(EE) (EE) Please consult the The X.Org Foundation support at http://wiki.x.org for help. (EE) Please also check the log file at "/var/log/Xorg.0.log" for additional information. (EE) (EE) Server terminated with error (1). Closing log file. ubuntu@ubuntu:/usr/lib/xorg/modules/drivers$ ubuntu@ubuntu:/usr/lib/xorg/modules/drivers$ less /var/log/Xorg.0.log [1029553.709] X.Org X Server 1.18.4 Release Date: 2016-07-19 [1029553.709] X Protocol Version 11, Revision 0 [1029553.709] Build Operating System: Linux 4.4.0-45-generic aarch64 Ubuntu [1029553.709] Current Operating System: Linux ubuntu 4.10.0-20.22-generic #22+pearl.2-Ubuntu SMP Thu Apr 27 20:23:08 UTC 2017 aarch64 [1029553.709] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.10.0-20.22-generic root=UUID=eee681c5-04ce-4cd0-a004-cae6717961ce ro debug earlycon=pl011,mmio,0x602B console=tty0 [1029553.709] Build Date: 02 November 2016 10:05:28PM [1029553.709] xorg-server 2:1.18.4-0ubuntu0.2 (For technical support please see http://www.ubuntu.com/support) [1029553.709] Current version of pixman: 0.33.6 [1029553.709] Before reporting problems, check http://wiki.x.org to make sure that you have the latest version. [1029553.709] Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. [1029553.709] (==) Log file: "/var/log/Xorg.0.log", Time: Tue May 30 17:45:40 2017 [1029553.709] (==) Using system config directory "/usr/share/X11/xorg.conf.d" [1029553.710] (==) No Layout section. Using the first Screen section. [1029553.710] (==) No screen section available. Using defaults. [1029553.710] (**) |-->Screen "Default Screen Section" (0) [1029553.710] (**) | |-->Monitor "" [1029553.710] (==) No monitor specified for screen "Default Screen Section". Using a default monitor configuration. [1029553.710] (==) Automatically adding devices [1029553.710] (==) Automatically enabling devices [1029553.710] (==) Automatically adding GPU devices [1029553.710] (==) Max clients allowed: 256, resource mask: 0x1f [1029553.710] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist. [1029553.710] Entry deleted from font path. [1029553.710] (WW) The directory "/usr/share/fonts/X11/100dpi/" does not exist. [1029553.710] Entry deleted from font path. [1029553.710] (WW) The directory "/usr/share/fonts/X11/75dpi/" does not exist. [1029553.710] Entry deleted from font path. [1029553.710] (WW) The directory "/usr/share/fonts/X11/100dpi" does not exist. [1029553.710] Entry deleted from font path. [1029553.710] (WW) The directory "/usr/share/fonts/X11/75dpi" does not exist. [1029553.710] Entry deleted from font path. [1029553.710] (==) FontPath set to: /usr/share/fonts/X11/misc, /usr/share/fonts/X11/Type1, built-ins les,/usr/lib/xorg/extra-modules,/usr/lib/xorg/modules" s. es. [1029553.710] (II) Loader magic: 0xb1d99d80 [1029553.710] (II) Module ABI versions: [1029553.710] X.Org ANSI C Emulation: 0.4 [1029553.710] X.Org Video Driver: 20.0 [1029553.710] X.Org XInput driver : 22.1 [1029553.710] X.Org Server Extension : 9.0 [1029553.711] (--) using VT number 3 ptty was not provided, disabling logind integration [1029553.712] (II) xfree86: Adding drm device (/dev/dri/card0) /33554432, 0x8ab00/2097152 [1029553.713] (II) LoadModule: "glx" [1029553.713] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so [1029553.714] (II) Module glx: vendor="X.Org Foundation" [1029553.714] compiled for 1.18.4, module version = 1.0.0 [1029553.714] ABI class: X.Org Server Extension, version 9.0 [1029553.714] (==) AIGLX enabled
[Touch-packages] [Bug 1691991] Re: Xorg Segmentation fault on Hisilicon D05 board (arm64)
Hi, What happens if you remove the fb driver - uninstall the xserver-xorg- video-fbdev package? Also, I'm not sure what (if any) changes have been made in the kernel version you're running - the 'pearl' version - but are you able to try against a mainline kernel? Regards, Daniel -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to xorg in Ubuntu. https://bugs.launchpad.net/bugs/1691991 Title: Xorg Segmentation fault on Hisilicon D05 board (arm64) Status in xorg package in Ubuntu: New Bug description: ubuntu@ubuntu:~$ sudo /usr/lib/xorg/Xorg [sudo] password for ubuntu: X.Org X Server 1.18.4 Release Date: 2016-07-19 X Protocol Version 11, Revision 0 Build Operating System: Linux 4.4.0-45-generic aarch64 Ubuntu Current Operating System: Linux ubuntu 4.10.0-20.22-generic #22+pearl.2-Ubuntu SMP Thu Apr 27 20:23:08 UTC 2017 aarch64 Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.10.0-20.22-generic root=UUID=eee681c5-04ce-4cd0-a004-cae6717961ce ro debug earlycon=pl011,mmio,0x602B console=tty0 Build Date: 02 November 2016 10:05:28PM xorg-server 2:1.18.4-0ubuntu0.2 (For technical support please see http://www.ubuntu.com/support) Current version of pixman: 0.33.6 Before reporting problems, check http://wiki.x.org to make sure that you have the latest version. Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. (==) Log file: "/var/log/Xorg.0.log", Time: Fri May 19 18:10:13 2017 (==) Using system config directory "/usr/share/X11/xorg.conf.d" pci id for fd 10: 19e5:1711, driver (null) EGL_MESA_drm_image required. (EE) (EE) Backtrace: (EE) 0: /usr/lib/xorg/Xorg (xorg_backtrace+0x58) [0xd7f1cc48] (EE) (EE) Segmentation fault at address 0xa0 (EE) Fatal server error: (EE) Caught signal 11 (Segmentation fault). Server aborting (EE) (EE) Please consult the The X.Org Foundation support at http://wiki.x.org for help. (EE) Please also check the log file at "/var/log/Xorg.0.log" for additional information. (EE) (EE) Server terminated with error (1). Closing log file. Aborted (core dumped) ubuntu@ubuntu:~$ To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/xorg/+bug/1691991/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 123920] Re: Bluetooth Logitech Dinovo Keyboard/Mouse don't work
** Changed in: bluez (Ubuntu) Status: Incomplete => Fix Released -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to bluez in Ubuntu. https://bugs.launchpad.net/bugs/123920 Title: Bluetooth Logitech Dinovo Keyboard/Mouse don't work Status in Bluez Utilities: New Status in Bluez-utils: New Status in Linux Mint: Invalid Status in Unity: Invalid Status in bluez package in Ubuntu: Fix Released Status in linux package in Ubuntu: Invalid Status in linux-source-2.6.22 package in Ubuntu: Won't Fix Status in udev package in Ubuntu: Invalid Bug description: Testing Gutsy Gibbon Tribe 2 LiveCD and bluetooth keyboard and mouse will work until Nautilus starts. After Nautilus starts the keyboard and mouse are unresponsive and do not work. I tried reconnecting the keyboard and mouse by using the discovery buttons on both the Bluetooth Dongle and Input device. The problem still persists. Using Intel P4 2.8 Ghz Processor, 3 GB ddr400 ram, Intel D875PBZ motherboard. Logitech Dinovo media keyboard and mx1000 laser bluetooth mouse, with logitech mini bluetooth receiver. To manage notifications about this bug go to: https://bugs.launchpad.net/bluez/+bug/123920/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1577197] Re: Pulseaudio bluez5-util.c: TryAcquire() failed - Operation Not Authorized
I suggest looking at the bugs tagged 'a2dp': https://bugs.launchpad.net/ubuntu/+source/pulseaudio/+bugs?field.tag=a2dp -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to bluez in Ubuntu. https://bugs.launchpad.net/bugs/1577197 Title: Pulseaudio bluez5-util.c: TryAcquire() failed - Operation Not Authorized Status in bluez package in Ubuntu: Incomplete Status in indicator-sound package in Ubuntu: Invalid Status in pulseaudio package in Ubuntu: Incomplete Bug description: Pulseaudio outright stops audio via Bluetooth after sleep or prolonged period of time. Only restart fixes the issue. This started early 2016 in 15.10. Issue is discussed here as well http://askubuntu.com/questions/763539/bluetooth-speaker-no-sound-in-ubuntu-16-04 and mentioned in other unrelated bugs. Ubuntu Xenial 16.04 LTS The log below: May 1 17:18:07 jalexoidmobile pulseaudio[2884]: [pulseaudio] module-bluez5-device.c: Default profile not connected, selecting off profile May 1 17:18:07 jalexoidmobile bluetoothd[7349]: /org/bluez/hci0/dev_00_02_3C_05_99_F2/fd4: fd(35) ready May 1 17:18:07 jalexoidmobile rtkit-daemon[1794]: Supervising 3 threads of 1 processes of 1 users. May 1 17:18:07 jalexoidmobile rtkit-daemon[1794]: Successfully made thread 10967 of process 2884 (n/a) owned by '1000' RT at priority 5. May 1 17:18:07 jalexoidmobile rtkit-daemon[1794]: Supervising 4 threads of 1 processes of 1 users. May 1 17:18:07 jalexoidmobile pulseaudio[2884]: [pulseaudio] bluez5-util.c: Transport TryAcquire() failed for transport /org/bluez/hci0/dev_00_02_3C_05_99_F2/fd4 (Operation Not Authorized) May 1 17:18:07 jalexoidmobile kernel: [20583.032442] input: 00:02:3C:05:99:F2 as /devices/virtual/input/input24 May 1 17:18:19 jalexoidmobile pulseaudio[2884]: [pulseaudio] sink-input.c: Failed to create sink input: sink is suspended. Bus 002 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 001 Device 006: ID 04f2:b2da Chicony Electronics Co., Ltd thinkpad t430s camera Bus 001 Device 008: ID 0a5c:21e6 Broadcom Corp. BCM20702 Bluetooth 4.0 [ThinkPad] Bus 001 Device 004: ID 147e:2020 Upek TouchChip Fingerprint Coprocessor (WBF advanced mode) Bus 001 Device 003: ID 17ef:1003 Lenovo Integrated Smart Card Reader Bus 001 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 004 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub [20388.983474] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready [20389.070114] usb 1-1.4: New USB device found, idVendor=0a5c, idProduct=21e6 [20389.070120] usb 1-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [20389.070122] usb 1-1.4: Product: BCM20702A0 [20389.070124] usb 1-1.4: Manufacturer: Broadcom Corp [20389.070126] usb 1-1.4: SerialNumber: 446D578686DD [20389.076232] Bluetooth: hci0: BCM: chip id 63 [20389.092220] Bluetooth: hci0: BCM20702A [20389.093225] Bluetooth: hci0: BCM20702A1 (001.002.014) build [20389.551476] wlan0: authenticate with a0:63:91:2f:3f:ed [20389.554391] wlan0: send auth to a0:63:91:2f:3f:ed (try 1/3) [20389.557790] wlan0: authenticated [20389.558339] wlan0: associate with a0:63:91:2f:3f:ed (try 1/3) [20389.562209] wlan0: RX AssocResp from a0:63:91:2f:3f:ed (capab=0x1411 status=0 aid=2) [20389.581260] wlan0: associated [20389.581369] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready [20389.830185] Bluetooth: hci0: BCM20702A1 (001.002.014) build 1669 [20389.846186] Bluetooth: hci0: Broadcom Bluetooth Device [20418.269466] input: 00:02:3C:05:99:F2 as /devices/virtual/input/input23 [20583.032442] input: 00:02:3C:05:99:F2 as /devices/virtual/input/input24 To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/bluez/+bug/1577197/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1694395] [NEW] ServerAlive and ClientAlive not working when using Tunnel=point-to-point
Public bug reported: The full IPv4 tunnel don't quit the ssh process when network connectivity fails, thus invalidating the potential benefit of Server/ClientAliveInterval and Server/ClientAliveCountMax. Here are some config file snippets. # cat /etc/ssh/sshd_config |uncomment GSSAPIAuthentication no ChallengeResponseAuthentication yes PermitRootLogin yes Port 22 Protocol 2 HostKey /etc/ssh/ssh_host_rsa_key HostKey /etc/ssh/ssh_host_ed25519_key UsePrivilegeSeparation yes KeyRegenerationInterval 3600 ServerKeyBits 1024 SyslogFacility AUTH LogLevel INFO LoginGraceTime 120 StrictModes yes RSAAuthentication yes PubkeyAuthentication yes IgnoreRhosts yes RhostsRSAAuthentication no HostbasedAuthentication no PermitEmptyPasswords no ChallengeResponseAuthentication no X11Forwarding yes X11DisplayOffset 10 PrintMotd no PrintLastLog yes TCPKeepAlive yes AcceptEnv LANG LC_* Subsystem sftp /usr/lib/openssh/sftp-server UsePAM yes PasswordAuthentication no UseDNS no PermitTunnel yes ClientAliveInterval 20 ClientAliveCountMax 3 Match User sshtun ForceCommand /bin/true # cat /etc/ssh/ssh_config |uncomment Host * SendEnv LANG LC_* HashKnownHosts yes GSSAPIAuthentication yes GSSAPIDelegateCredentials no ServerAliveInterval 20 ServerAliveCountMax 3 # grep sshtun /etc/passwd sshtun:x:1000:1000:,,,:/home/sshtun:/bin/false # grep sshtun /etc/shadow sshtun:!:17102:0:9:7::: # grep -A6 tun203 /etc/network/interfaces.d/tunnels.cfg auto tun203 iface tun203 inet manual pre-up /sbin/ifup venet0:0 >/dev/null 2>&1 || true pre-up /sbin/ip tuntap add $IFACE mode tun user sshtun pre-up /sbin/ip link set dev $IFACE up pre-up /sbin/ip address add 100.127.0.2/32 dev lo >/dev/null 2>&1 || true post-up /sbin/ip route add 100.127.0.3 dev $IFACE src 100.127.0.2 >/dev/null 2>&1 || true post-down /sbin/ip link del $IFACE The purpose of this configuration is to establish a full IPv4 tunnel between initiatorserver.example.com and w1.example.com using tun203 iface name on both side. Down below an ssh command that don't show any "client_input_global_request: rtype keepal...@openssh.com want_reply 1" at the end. sudo -u sshtun ssh -N -T -i /home/sshtun/.ssh/id_ed25519 -w 203:203 -o LogLevel=DEBUG3 -o ServerAliveInterval=30 -o ServerAliveCountMax=3 -o ConnectTimeout=10 -o ExitOnForwardFailure=yes -o Tunnel=point-to-point ssh...@w1.example.com debug1: Reading configuration data /home/sshtun/.ssh/config debug1: /home/sshtun/.ssh/config line 1: Applying options for *.example.com debug1: Reading configuration data /etc/ssh/ssh_config debug1: /etc/ssh/ssh_config line 19: Applying options for * debug2: ssh_connect: needpriv 0 debug1: Connecting to w1.example.com [203.0.113.1] port 22. debug2: fd 3 setting O_NONBLOCK debug1: fd 3 clearing O_NONBLOCK debug1: Connection established. debug3: timeout: 1 ms remain after connect debug1: identity file /home/sshtun/.ssh/id_ed25519 type 4 debug1: key_load_public: No such file or directory debug1: identity file /home/sshtun/.ssh/id_ed25519-cert type -1 debug1: Enabling compatibility mode for protocol 2.0 debug1: Local version string SSH-2.0-OpenSSH_6.7p1 Debian-5+deb8u3 debug1: Remote protocol version 2.0, remote software version OpenSSH_6.7p1 Debian-5+deb8u3 debug1: match: OpenSSH_6.7p1 Debian-5+deb8u3 pat OpenSSH* compat 0x0400 debug2: fd 3 setting O_NONBLOCK debug3: load_hostkeys: loading entries for host "w1.example.com" from file "/home/sshtun/.ssh/known_hosts" debug3: load_hostkeys: found key type ED25519 in file /home/sshtun/.ssh/known_hosts:5 debug3: load_hostkeys: loaded 1 keys debug3: order_hostkeyalgs: prefer hostkeyalgs: ssh-ed25519-cert-...@openssh.com,ssh-ed25519 debug1: SSH2_MSG_KEXINIT sent debug1: SSH2_MSG_KEXINIT received debug2: kex_parse_kexinit: curve25519-sha...@libssh.org,ecdh-sha2-nistp256,ecdh-sha2-nistp384,ecdh-sha2-nistp521,diffie-hellman-group-exchange-sha256,diffie-hellman-group14-sha1,diffie-hellman-group-exchange-sha1,diffie-hellman-group1-sha1 debug2: kex_parse_kexinit: ssh-ed25519-cert-...@openssh.com,ssh-ed25519,ecdsa-sha2-nistp256-cert-...@openssh.com,ecdsa-sha2-nistp384-cert-...@openssh.com,ecdsa-sha2-nistp521-cert-...@openssh.com,ssh-rsa-cert-...@openssh.com,ssh-dss-cert-...@openssh.com,ssh-rsa-cert-...@openssh.com,ssh-dss-cert-...@openssh.com,ecdsa-sha2-nistp256,ecdsa-sha2-nistp384,ecdsa-sha2-nistp521,ssh-rsa,ssh-dss debug2: kex_parse_kexinit: aes128-ctr,aes192-ctr,aes256-ctr,aes128-...@openssh.com,aes256-...@openssh.com,chacha20-poly1...@openssh.com,arcfour256,arcfour128,aes128-cbc,3des-cbc,blowfish-cbc,cast128-cbc,aes192-cbc,aes256-cbc,arcfour,rijndael-...@lysator.liu.se debug2: kex_parse_kexinit:
[Touch-packages] [Bug 1693895] Re: ubuntu budgie suspend to ram fails on Macbook Pro Ret
It means there's a bug on kernel driver with runtime power management enable. Runtime power management (RPM) is generally favorable because it can prolong your battery time. ** Also affects: linux (Ubuntu) Importance: Undecided Status: New -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to systemd in Ubuntu. https://bugs.launchpad.net/bugs/1693895 Title: ubuntu budgie suspend to ram fails on Macbook Pro Ret Status in linux package in Ubuntu: Confirmed Status in systemd package in Ubuntu: New Bug description: A default installation of Ubuntu Budgie fails to suspend to RAM. Workaround: sudo apt-get install pm-utils => Suspend works ProblemType: Bug DistroRelease: Ubuntu 17.04 Package: systemd 232-21ubuntu3 ProcVersionSignature: Ubuntu 4.10.0-21.23-generic 4.10.11 Uname: Linux 4.10.0-21-generic x86_64 NonfreeKernelModules: wl nvidia_uvm nvidia_drm nvidia_modeset nvidia ApportVersion: 2.20.4-0ubuntu4.1 Architecture: amd64 CurrentDesktop: Budgie:GNOME Date: Fri May 26 20:13:16 2017 InstallationDate: Installed on 2017-05-25 (0 days ago) InstallationMedia: Ubuntu-Budgie 17.04 "Zesty Zapus" - Release amd64 (20170412) MachineType: Apple Inc. MacBookPro10,1 ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-4.10.0-21-generic.efi.signed root=UUID=873566f9-4c01-4dae-8ca9-99c95dfbe269 ro quiet splash vt.handoff=7 SourcePackage: systemd UpgradeStatus: No upgrade log present (probably fresh install) dmi.bios.date: 12/21/2012 dmi.bios.vendor: Apple Inc. dmi.bios.version: MBP101.88Z.00EE.B03.1212211437 dmi.board.asset.tag: Base Board Asset Tag# dmi.board.name: Mac-C3EC7CD22292981F dmi.board.vendor: Apple Inc. dmi.board.version: MacBookPro10,1 dmi.chassis.type: 10 dmi.chassis.vendor: Apple Inc. dmi.chassis.version: Mac-C3EC7CD22292981F dmi.modalias: dmi:bvnAppleInc.:bvrMBP101.88Z.00EE.B03.1212211437:bd12/21/2012:svnAppleInc.:pnMacBookPro10,1:pvr1.0:rvnAppleInc.:rnMac-C3EC7CD22292981F:rvrMacBookPro10,1:cvnAppleInc.:ct10:cvrMac-C3EC7CD22292981F: dmi.product.name: MacBookPro10,1 dmi.product.version: 1.0 dmi.sys.vendor: Apple Inc. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1693895/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1693895] Status changed to Confirmed
This change was made by a bot. ** Changed in: linux (Ubuntu) Status: New => Confirmed -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to systemd in Ubuntu. https://bugs.launchpad.net/bugs/1693895 Title: ubuntu budgie suspend to ram fails on Macbook Pro Ret Status in linux package in Ubuntu: Confirmed Status in systemd package in Ubuntu: New Bug description: A default installation of Ubuntu Budgie fails to suspend to RAM. Workaround: sudo apt-get install pm-utils => Suspend works ProblemType: Bug DistroRelease: Ubuntu 17.04 Package: systemd 232-21ubuntu3 ProcVersionSignature: Ubuntu 4.10.0-21.23-generic 4.10.11 Uname: Linux 4.10.0-21-generic x86_64 NonfreeKernelModules: wl nvidia_uvm nvidia_drm nvidia_modeset nvidia ApportVersion: 2.20.4-0ubuntu4.1 Architecture: amd64 CurrentDesktop: Budgie:GNOME Date: Fri May 26 20:13:16 2017 InstallationDate: Installed on 2017-05-25 (0 days ago) InstallationMedia: Ubuntu-Budgie 17.04 "Zesty Zapus" - Release amd64 (20170412) MachineType: Apple Inc. MacBookPro10,1 ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-4.10.0-21-generic.efi.signed root=UUID=873566f9-4c01-4dae-8ca9-99c95dfbe269 ro quiet splash vt.handoff=7 SourcePackage: systemd UpgradeStatus: No upgrade log present (probably fresh install) dmi.bios.date: 12/21/2012 dmi.bios.vendor: Apple Inc. dmi.bios.version: MBP101.88Z.00EE.B03.1212211437 dmi.board.asset.tag: Base Board Asset Tag# dmi.board.name: Mac-C3EC7CD22292981F dmi.board.vendor: Apple Inc. dmi.board.version: MacBookPro10,1 dmi.chassis.type: 10 dmi.chassis.vendor: Apple Inc. dmi.chassis.version: Mac-C3EC7CD22292981F dmi.modalias: dmi:bvnAppleInc.:bvrMBP101.88Z.00EE.B03.1212211437:bd12/21/2012:svnAppleInc.:pnMacBookPro10,1:pvr1.0:rvnAppleInc.:rnMac-C3EC7CD22292981F:rvrMacBookPro10,1:cvnAppleInc.:ct10:cvrMac-C3EC7CD22292981F: dmi.product.name: MacBookPro10,1 dmi.product.version: 1.0 dmi.sys.vendor: Apple Inc. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1693895/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
Re: [Touch-packages] [Bug 123920] Re: Bluetooth Logitech Dinovo Keyboard/Mouse don't work
I'm sorry, I retract. Got stuck in the wrong bug. Everythings fine here! Daniel van Vugtschrieb am Di., 30. Mai 2017 um 03:49 Uhr: > Alex, what current Ubuntu release do you continue to have trouble in? > > -- > You received this bug notification because you are subscribed to a > duplicate bug report (872940). > https://bugs.launchpad.net/bugs/123920 > > Title: > Bluetooth Logitech Dinovo Keyboard/Mouse don't work > > To manage notifications about this bug go to: > https://bugs.launchpad.net/bluez/+bug/123920/+subscriptions > -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to bluez in Ubuntu. https://bugs.launchpad.net/bugs/123920 Title: Bluetooth Logitech Dinovo Keyboard/Mouse don't work Status in Bluez Utilities: New Status in Bluez-utils: New Status in Linux Mint: Invalid Status in Unity: Invalid Status in bluez package in Ubuntu: Incomplete Status in linux package in Ubuntu: Invalid Status in linux-source-2.6.22 package in Ubuntu: Won't Fix Status in udev package in Ubuntu: Invalid Bug description: Testing Gutsy Gibbon Tribe 2 LiveCD and bluetooth keyboard and mouse will work until Nautilus starts. After Nautilus starts the keyboard and mouse are unresponsive and do not work. I tried reconnecting the keyboard and mouse by using the discovery buttons on both the Bluetooth Dongle and Input device. The problem still persists. Using Intel P4 2.8 Ghz Processor, 3 GB ddr400 ram, Intel D875PBZ motherboard. Logitech Dinovo media keyboard and mx1000 laser bluetooth mouse, with logitech mini bluetooth receiver. To manage notifications about this bug go to: https://bugs.launchpad.net/bluez/+bug/123920/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1177823] Re: qdbus needs qtchooser dependency to work
Problem still exists in Zesty, confirming herophuong93 workaround works for me. -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to qt4-x11 in Ubuntu. https://bugs.launchpad.net/bugs/1177823 Title: qdbus needs qtchooser dependency to work Status in qt4-x11 package in Ubuntu: Confirmed Bug description: If the system does not have ubuntu-sdk installed, any qdbus command does not work, e.g. [10:49] [2372] [patola@nexus7 patola]% qdbus qdbus: could not find a Qt installation of '' [10:49] [2373] [patola@nexus7 patola]% qdbus --help qdbus: could not find a Qt installation of '' [10:50] [2374] [patola@nexus7 patola]% qdbus org.freedesktop.DBus qdbus: could not find a Qt installation of '' I am not sure if it is anything specific to qt5-default or its dependencies. I tried to install only qttools5-dev-tools and qt5-default so that it would use qtchooser as qdbus, but it didn't work. I had to install the whole ubuntu-sdk. Tested on a Nexus7 and Chromebook Series 3 with Chrubuntu, both armhf, but I guess this is also valid for the Intel architecture. LSB RELEASE: root@nexus7:~# lsb_release -rd Description:Ubuntu 13.04 Release:13.04 WHAT I EXPECTED TO HAPPEN: [11:09] [2388] [patola@nexus7 patola]% qdbus org.freedesktop.DBus / signal void org.freedesktop.DBus.NameAcquired(QString) signal void org.freedesktop.DBus.NameLost(QString) signal void org.freedesktop.DBus.NameOwnerChanged(QString, QString, QString) method void org.freedesktop.DBus.AddMatch(QString) method QByteArray org.freedesktop.DBus.GetAdtAuditSessionData(QString) method QByteArray org.freedesktop.DBus.GetConnectionSELinuxSecurityContext(QString) method uint org.freedesktop.DBus.GetConnectionUnixProcessID(QString) method uint org.freedesktop.DBus.GetConnectionUnixUser(QString) method QString org.freedesktop.DBus.GetId() method QString org.freedesktop.DBus.GetNameOwner(QString) method QString org.freedesktop.DBus.Hello() method QStringList org.freedesktop.DBus.ListActivatableNames() method QStringList org.freedesktop.DBus.ListNames() method QStringList org.freedesktop.DBus.ListQueuedOwners(QString) method bool org.freedesktop.DBus.NameHasOwner(QString) method uint org.freedesktop.DBus.ReleaseName(QString) method void org.freedesktop.DBus.ReloadConfig() method void org.freedesktop.DBus.RemoveMatch(QString) method uint org.freedesktop.DBus.RequestName(QString, uint) method uint org.freedesktop.DBus.StartServiceByName(QString, uint) ProblemType: Bug DistroRelease: Ubuntu 13.04 Package: qdbus 4:4.8.4+dfsg-0ubuntu9 Uname: Linux 3.1.10-10-nexus7 armv7l ApportVersion: 2.9.2-0ubuntu8 Architecture: armhf Date: Wed May 8 10:57:09 2013 InstallationDate: Installed on 2013-03-15 (54 days ago) InstallationMedia: Ubuntu Raring Ringtail (development branch) - armhf (20130314-15:12) MarkForUpload: True SourcePackage: qt4-x11 UpgradeStatus: No upgrade log present (probably fresh install) To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/qt4-x11/+bug/1177823/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1577197] Re: Pulseaudio bluez5-util.c: TryAcquire() failed - Operation Not Authorized
I am sorry, I just checked by launching "tail -f /var/log/syslog" and then switching on my bluetooth headset, here is what appears: May 30 08:15:21 desktop pulseaudio[1504]: [pulseaudio] module-bluez5-device.c: Default profile not connected, selecting off profile So I guess I have another issue. I know this is not the place, but if you happen to know where I should start looking for, I have no idea… Thanks -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to bluez in Ubuntu. https://bugs.launchpad.net/bugs/1577197 Title: Pulseaudio bluez5-util.c: TryAcquire() failed - Operation Not Authorized Status in bluez package in Ubuntu: Incomplete Status in indicator-sound package in Ubuntu: Invalid Status in pulseaudio package in Ubuntu: Incomplete Bug description: Pulseaudio outright stops audio via Bluetooth after sleep or prolonged period of time. Only restart fixes the issue. This started early 2016 in 15.10. Issue is discussed here as well http://askubuntu.com/questions/763539/bluetooth-speaker-no-sound-in-ubuntu-16-04 and mentioned in other unrelated bugs. Ubuntu Xenial 16.04 LTS The log below: May 1 17:18:07 jalexoidmobile pulseaudio[2884]: [pulseaudio] module-bluez5-device.c: Default profile not connected, selecting off profile May 1 17:18:07 jalexoidmobile bluetoothd[7349]: /org/bluez/hci0/dev_00_02_3C_05_99_F2/fd4: fd(35) ready May 1 17:18:07 jalexoidmobile rtkit-daemon[1794]: Supervising 3 threads of 1 processes of 1 users. May 1 17:18:07 jalexoidmobile rtkit-daemon[1794]: Successfully made thread 10967 of process 2884 (n/a) owned by '1000' RT at priority 5. May 1 17:18:07 jalexoidmobile rtkit-daemon[1794]: Supervising 4 threads of 1 processes of 1 users. May 1 17:18:07 jalexoidmobile pulseaudio[2884]: [pulseaudio] bluez5-util.c: Transport TryAcquire() failed for transport /org/bluez/hci0/dev_00_02_3C_05_99_F2/fd4 (Operation Not Authorized) May 1 17:18:07 jalexoidmobile kernel: [20583.032442] input: 00:02:3C:05:99:F2 as /devices/virtual/input/input24 May 1 17:18:19 jalexoidmobile pulseaudio[2884]: [pulseaudio] sink-input.c: Failed to create sink input: sink is suspended. Bus 002 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 001 Device 006: ID 04f2:b2da Chicony Electronics Co., Ltd thinkpad t430s camera Bus 001 Device 008: ID 0a5c:21e6 Broadcom Corp. BCM20702 Bluetooth 4.0 [ThinkPad] Bus 001 Device 004: ID 147e:2020 Upek TouchChip Fingerprint Coprocessor (WBF advanced mode) Bus 001 Device 003: ID 17ef:1003 Lenovo Integrated Smart Card Reader Bus 001 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 004 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub [20388.983474] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready [20389.070114] usb 1-1.4: New USB device found, idVendor=0a5c, idProduct=21e6 [20389.070120] usb 1-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [20389.070122] usb 1-1.4: Product: BCM20702A0 [20389.070124] usb 1-1.4: Manufacturer: Broadcom Corp [20389.070126] usb 1-1.4: SerialNumber: 446D578686DD [20389.076232] Bluetooth: hci0: BCM: chip id 63 [20389.092220] Bluetooth: hci0: BCM20702A [20389.093225] Bluetooth: hci0: BCM20702A1 (001.002.014) build [20389.551476] wlan0: authenticate with a0:63:91:2f:3f:ed [20389.554391] wlan0: send auth to a0:63:91:2f:3f:ed (try 1/3) [20389.557790] wlan0: authenticated [20389.558339] wlan0: associate with a0:63:91:2f:3f:ed (try 1/3) [20389.562209] wlan0: RX AssocResp from a0:63:91:2f:3f:ed (capab=0x1411 status=0 aid=2) [20389.581260] wlan0: associated [20389.581369] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready [20389.830185] Bluetooth: hci0: BCM20702A1 (001.002.014) build 1669 [20389.846186] Bluetooth: hci0: Broadcom Bluetooth Device [20418.269466] input: 00:02:3C:05:99:F2 as /devices/virtual/input/input23 [20583.032442] input: 00:02:3C:05:99:F2 as /devices/virtual/input/input24 To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/bluez/+bug/1577197/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1544627] Re: systemd-udevd crashed with SIGABRT in __open_nocancel()
Write ISO to USB using startup disc creator corrado@corrado-art-gnome:~$ inxi -Fx System:Host: corrado-art-gnome Kernel: 4.10.0-22-generic x86_64 (64 bit gcc: 6.3.0) Desktop: Gnome 3.24.2 (Gtk 3.22.15-0ubuntu1) Distro: Ubuntu Artful Aardvark (development branch) Machine: Device: desktop Mobo: Gigabyte model: H87M-D3H v: x.x UEFI: American Megatrends v: F3 date: 04/24/2013 CPU: Dual core Intel Core i3-4130 (-HT-MCP-) cache: 3072 KB flags: (lm nx sse sse2 sse3 sse4_1 sse4_2 ssse3 vmx) bmips: 13569 clock speeds: max: 3400 MHz 1: 3400 MHz 2: 3400 MHz 3: 3400 MHz 4: 3400 MHz Graphics: Card: Intel 4th Generation Core Processor Family Integrated Graphics Controller bus-ID: 00:02.0 Display Server: X.Org 1.19.3 driver: N/A Resolution: 1680x1050@59.88hz GLX Renderer: Mesa DRI Intel Haswell GLX Version: 3.0 Mesa 17.1.0 Direct Rendering: Yes Audio: Card-1 Intel 8 Series/C220 Series High Definition Audio Controller driver: snd_hda_intel bus-ID: 00:1b.0 Card-2 Intel Xeon E3-1200 v3/4th Gen Core Processor HD Audio Controller driver: snd_hda_intel bus-ID: 00:03.0 Sound: Advanced Linux Sound Architecture v: k4.10.0-22-generic Network: Card: Realtek RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller driver: r8169 v: 2.3LK-NAPI port: e000 bus-ID: 02:00.0 IF: enp2s0 state: up speed: 100 Mbps duplex: full mac: 94:de:80:7e:90:a7 Drives:HDD Total Size: 1000.2GB (13.1% used) ID-1: /dev/sda model: ST1000DM003 size: 1000.2GB temp: 33C Partition: ID-1: / size: 32G used: 5.9G (20%) fs: ext4 dev: /dev/sda8 ID-2: swap-1 size: 8.59GB used: 0.00GB (0%) fs: swap dev: /dev/sda2 RAID: No RAID devices: /proc/mdstat, md_mod kernel module present Sensors: System Temperatures: cpu: 29.8C mobo: 27.8C Fan Speeds (in rpm): cpu: N/A Info: Processes: 267 Uptime: 1:23 Memory: 1492.1/7861.1MB Init: systemd runlevel: 5 Gcc sys: 6.3.0 Client: Shell (bash 4.4.121) inxi: 2.3.8 corrado@corrado-art-gnome:~$ -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to systemd in Ubuntu. https://bugs.launchpad.net/bugs/1544627 Title: systemd-udevd crashed with SIGABRT in __open_nocancel() Status in systemd package in Ubuntu: Confirmed Bug description: The computer was one... I was not even using it... ProblemType: Crash DistroRelease: Ubuntu 16.04 Package: udev 228-5ubuntu3 ProcVersionSignature: Ubuntu 4.4.0-4.19-generic 4.4.1 Uname: Linux 4.4.0-4-generic x86_64 NonfreeKernelModules: nvidia_uvm nvidia ApportVersion: 2.19.4-0ubuntu2 Architecture: amd64 Date: Thu Feb 11 14:59:05 2016 ExecutablePath: /lib/systemd/systemd-udevd InstallationDate: Installed on 2016-02-03 (8 days ago) InstallationMedia: Ubuntu 16.04 LTS "Xenial Xerus" - Alpha amd64 (20160131) MachineType: HP HP ZBook Studio G3 ProcCmdline: /lib/systemd/systemd-udevd ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-4.4.0-4-generic root=UUID=a9634764-1439-45e7-a0ca-8c2d030238e6 ro quiet splash Signal: 6 SourcePackage: systemd StacktraceTop: __open_nocancel () at ../sysdeps/unix/syscall-template.S:81 ?? () ?? () ?? () ?? () Title: systemd-udevd crashed with SIGABRT in __open_nocancel() UpgradeStatus: No upgrade log present (probably fresh install) UserGroups: dmi.bios.date: 12/25/2015 dmi.bios.vendor: HP dmi.bios.version: N82 Ver. 01.03 dmi.board.name: 80D4 dmi.board.vendor: HP dmi.board.version: KBC Version 11.38 dmi.chassis.type: 10 dmi.chassis.vendor: HP dmi.modalias: dmi:bvnHP:bvrN82Ver.01.03:bd12/25/2015:svnHP:pnHPZBookStudioG3:pvr:rvnHP:rn80D4:rvrKBCVersion11.38:cvnHP:ct10:cvr: dmi.product.name: HP ZBook Studio G3 dmi.sys.vendor: HP To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/systemd/+bug/1544627/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1694379] [NEW] Crash with multi-screen
Public bug reported: XORG crash if I plug a second screen with the DVI input on my laptop. The bug appear after a recent update of Ubuntu 16.04 ProblemType: Bug DistroRelease: Ubuntu 16.04 Package: xorg 1:7.7+13ubuntu3 ProcVersionSignature: Ubuntu 4.4.0-78.99-generic 4.4.62 Uname: Linux 4.4.0-78-generic x86_64 NonfreeKernelModules: nvidia_uvm nvidia_drm nvidia_modeset nvidia .proc.driver.nvidia.gpus..02.00.0: Error: [Errno 21] est un dossier: '/proc/driver/nvidia/gpus/:02:00.0' .proc.driver.nvidia.registry: Binary: "" .proc.driver.nvidia.version: NVRM version: NVIDIA UNIX x86_64 Kernel Module 364.19 Tue Apr 19 14:44:55 PDT 2016 GCC version: gcc version 5.4.0 20160609 (Ubuntu 5.4.0-6ubuntu1~16.04.4) .tmp.unity_support_test.0: ApportVersion: 2.20.1-0ubuntu2.6 Architecture: amd64 CompizPlugins: No value set for `/apps/compiz-1/general/screen0/options/active_plugins' CompositorRunning: compiz CompositorUnredirectDriverBlacklist: '(nouveau|Intel).*Mesa 8.0' CompositorUnredirectFSW: true CurrentDesktop: Unity Date: Tue May 30 08:25:47 2017 DistUpgraded: Fresh install DistroCodename: xenial DistroVariant: ubuntu GraphicsCard: Intel Corporation 4th Gen Core Processor Integrated Graphics Controller [8086:0416] (rev 06) (prog-if 00 [VGA controller]) Subsystem: Lenovo 4th Gen Core Processor Integrated Graphics Controller [17aa:221d] NVIDIA Corporation GK208M [GeForce GT 730M] [10de:1290] (rev a1) (prog-if 00 [VGA controller]) Subsystem: Lenovo GK208M [GeForce GT 730M] [17aa:221d] InstallationDate: Installed on 2016-06-20 (343 days ago) InstallationMedia: Ubuntu 16.04 LTS "Xenial Xerus" - Release amd64 (20160420.1) MachineType: LENOVO 20AWS5H500 ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-4.4.0-78-generic root=UUID=3598049e-4f06-494b-82cc-d5a007b0e461 ro quiet splash "acpi=Windows 2013" vt.handoff=7 SourcePackage: xorg UpgradeStatus: No upgrade log present (probably fresh install) dmi.bios.date: 01/19/2016 dmi.bios.vendor: LENOVO dmi.bios.version: GLET82WW (2.36 ) dmi.board.asset.tag: Not Available dmi.board.name: 20AWS5H500 dmi.board.vendor: LENOVO dmi.board.version: Not Defined dmi.chassis.asset.tag: No Asset Information dmi.chassis.type: 10 dmi.chassis.vendor: LENOVO dmi.chassis.version: Not Available dmi.modalias: dmi:bvnLENOVO:bvrGLET82WW(2.36):bd01/19/2016:svnLENOVO:pn20AWS5H500:pvrThinkPadT440p:rvnLENOVO:rn20AWS5H500:rvrNotDefined:cvnLENOVO:ct10:cvrNotAvailable: dmi.product.name: 20AWS5H500 dmi.product.version: ThinkPad T440p dmi.sys.vendor: LENOVO version.compiz: compiz 1:0.9.12.2+16.04.20160823-0ubuntu1 version.ia32-libs: ia32-libs N/A version.libdrm2: libdrm2 2.4.70-1~ubuntu16.04.1 version.libgl1-mesa-dri: libgl1-mesa-dri 12.0.6-0ubuntu0.16.04.1 version.libgl1-mesa-dri-experimental: libgl1-mesa-dri-experimental N/A version.libgl1-mesa-glx: libgl1-mesa-glx 12.0.6-0ubuntu0.16.04.1 version.nvidia-graphics-drivers: nvidia-graphics-drivers-* N/A version.xserver-xorg-core: xserver-xorg-core 2:1.18.4-0ubuntu0.2 version.xserver-xorg-input-evdev: xserver-xorg-input-evdev 1:2.10.1-1ubuntu2 version.xserver-xorg-video-ati: xserver-xorg-video-ati 1:7.7.0-1 version.xserver-xorg-video-intel: xserver-xorg-video-intel 2:2.99.917+git20160325-1ubuntu1.2 version.xserver-xorg-video-nouveau: xserver-xorg-video-nouveau 1:1.0.12-1build2 xserver.bootTime: Tue May 30 08:18:29 2017 xserver.configfile: /etc/X11/xorg.conf xserver.errors: xserver.logfile: /var/log/Xorg.0.log xserver.version: 2:1.18.4-0ubuntu0.2 ** Affects: xorg (Ubuntu) Importance: Undecided Status: New ** Tags: amd64 apport-bug compiz-0.9 ubuntu xenial -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to xorg in Ubuntu. https://bugs.launchpad.net/bugs/1694379 Title: Crash with multi-screen Status in xorg package in Ubuntu: New Bug description: XORG crash if I plug a second screen with the DVI input on my laptop. The bug appear after a recent update of Ubuntu 16.04 ProblemType: Bug DistroRelease: Ubuntu 16.04 Package: xorg 1:7.7+13ubuntu3 ProcVersionSignature: Ubuntu 4.4.0-78.99-generic 4.4.62 Uname: Linux 4.4.0-78-generic x86_64 NonfreeKernelModules: nvidia_uvm nvidia_drm nvidia_modeset nvidia .proc.driver.nvidia.gpus..02.00.0: Error: [Errno 21] est un dossier: '/proc/driver/nvidia/gpus/:02:00.0' .proc.driver.nvidia.registry: Binary: "" .proc.driver.nvidia.version: NVRM version: NVIDIA UNIX x86_64 Kernel Module 364.19 Tue Apr 19 14:44:55 PDT 2016 GCC version: gcc version 5.4.0 20160609 (Ubuntu 5.4.0-6ubuntu1~16.04.4) .tmp.unity_support_test.0: ApportVersion: 2.20.1-0ubuntu2.6 Architecture: amd64 CompizPlugins: No value set for `/apps/compiz-1/general/screen0/options/active_plugins' CompositorRunning: compiz CompositorUnredirectDriverBlacklist: '(nouveau|Intel).*Mesa 8.0' CompositorUnredirectFSW: true CurrentDesktop: Unity Date: Tue May 30 08:25:47 2017 DistUpgraded: Fresh
[Touch-packages] [Bug 1694367] [NEW] Screen tearing in 16.10 onwards
Public bug reported: In 16.10 onwards my laptop has always shown screen tearing globally, additionally GL applications will not v-sync despite attempting to, they appear to sync slightly off from the [integrated] display. This occurs with kernels 4.8 to 4.11 and mesa 12 to 17, so not entirely sure if it's a bug with either or a default miss-configuration in ubuntu... ubuntu-bug also appears to be broken... ** Affects: kernel-package (Ubuntu) Importance: Undecided Status: New ** Affects: mesa (Ubuntu) Importance: Undecided Status: New ** Also affects: kernel-package (Ubuntu) Importance: Undecided Status: New -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to mesa in Ubuntu. https://bugs.launchpad.net/bugs/1694367 Title: Screen tearing in 16.10 onwards Status in kernel-package package in Ubuntu: New Status in mesa package in Ubuntu: New Bug description: In 16.10 onwards my laptop has always shown screen tearing globally, additionally GL applications will not v-sync despite attempting to, they appear to sync slightly off from the [integrated] display. This occurs with kernels 4.8 to 4.11 and mesa 12 to 17, so not entirely sure if it's a bug with either or a default miss- configuration in ubuntu... ubuntu-bug also appears to be broken... To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/kernel-package/+bug/1694367/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp