[Touch-packages] [Bug 1773897] Re: [regression] Logitech M337 mice are automatically disconnected after connected
As mentioned in the bug description, this bug only ever occurred on Intel 8265 with the M337 on bionic. All other issues should be discussed in other bugs. -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to bluez in Ubuntu. https://bugs.launchpad.net/bugs/1773897 Title: [regression] Logitech M337 mice are automatically disconnected after connected Status in Bluez Utilities: Confirmed Status in OEM Priority Project: Incomplete Status in bluez package in Ubuntu: Invalid Bug description: The BT 3.0 mouse is disconnected automatically after connected with the notebook. The fail rate is around 9/10. 1. The bug only occurs on the machine with intel 8265 module. I got three Dell XPS 13 (one is with Killer 1435, two are with intel 8265). This bug can not be reproduced on the machine with Killer 1435. 2. This bug can be reproduced since bluez 5.46. Using bluez 5.45, this bug can not be reproduced. Notebook: Dell XPS 13 Wi-Fi/BT module: intel 8265, 8087:0a2b bluez: 5.48 BT mouse: logitech M337 --- ApportVersion: 2.20.9-0ubuntu7 Architecture: amd64 CurrentDesktop: ubuntu:GNOME DistroRelease: Ubuntu 18.04 InstallationDate: Installed on 2018-05-29 (0 days ago) InstallationMedia: Ubuntu 18.04 LTS "Bionic Beaver" - Release amd64 (20180426) InterestingModules: rfcomm bnep btusb bluetooth Lsusb: Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub Bus 001 Device 003: ID 8087:0a2b Intel Corp. Bus 001 Device 002: ID 0bda:58f4 Realtek Semiconductor Corp. Bus 001 Device 004: ID 27c6:5385 Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub MachineType: Dell Inc. XPS 13 9370 Package: bluez 5.48-0ubuntu3 [origin: unknown] PackageArchitecture: amd64 ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-4.15.0-22-generic root=UUID=d6251f09-cbb5-4635-8f42-31e6c32f1c03 ro quiet splash vt.handoff=1 ProcVersionSignature: Ubuntu 4.15.0-22.24-generic 4.15.17 Tags: third-party-packages bionic Uname: Linux 4.15.0-22-generic x86_64 UnreportableReason: This is not an official Ubuntu package. Please remove any third party package and try again. UpgradeStatus: No upgrade log present (probably fresh install) UserGroups: adm cdrom dip lpadmin plugdev sambashare sudo _MarkForUpload: True dmi.bios.date: 11/03/2017 dmi.bios.vendor: Dell Inc. dmi.bios.version: 0.3.13 dmi.board.name: 0173S1 dmi.board.vendor: Dell Inc. dmi.board.version: A00 dmi.chassis.type: 9 dmi.chassis.vendor: Dell Inc. dmi.modalias: dmi:bvnDellInc.:bvr0.3.13:bd11/03/2017:svnDellInc.:pnXPS139370:pvr:rvnDellInc.:rn0173S1:rvrA00:cvnDellInc.:ct9:cvr: dmi.product.family: XPS dmi.product.name: XPS 13 9370 dmi.sys.vendor: Dell Inc. hciconfig: hci0:Type: Primary Bus: USB BD Address: D4:25:8B:4F:7E:D6 ACL MTU: 1021:4 SCO MTU: 96:6 UP RUNNING PSCAN ISCAN RX bytes:61781 acl:382 sco:0 events:536 errors:0 TX bytes:7985 acl:69 sco:0 commands:168 errors:0 To manage notifications about this bug go to: https://bugs.launchpad.net/bluez/+bug/1773897/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1773897] Re: [regression] Logitech M337 mice are automatically disconnected after connected
This bug is not about suspending and resuming. And I can't test resuming because my system becomes too unstable (for other reasons). As for system reboot, I have always had problems with some Bluetooth devices reconnecting on reboot. But that problem is not confined to mice. It happens with audio too. I think the mice fixes in comment #50 are worth having, but this is the wrong bug to discuss them in. -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to bluez in Ubuntu. https://bugs.launchpad.net/bugs/1773897 Title: [regression] Logitech M337 mice are automatically disconnected after connected Status in Bluez Utilities: Confirmed Status in OEM Priority Project: Incomplete Status in bluez package in Ubuntu: Invalid Bug description: The BT 3.0 mouse is disconnected automatically after connected with the notebook. The fail rate is around 9/10. 1. The bug only occurs on the machine with intel 8265 module. I got three Dell XPS 13 (one is with Killer 1435, two are with intel 8265). This bug can not be reproduced on the machine with Killer 1435. 2. This bug can be reproduced since bluez 5.46. Using bluez 5.45, this bug can not be reproduced. Notebook: Dell XPS 13 Wi-Fi/BT module: intel 8265, 8087:0a2b bluez: 5.48 BT mouse: logitech M337 --- ApportVersion: 2.20.9-0ubuntu7 Architecture: amd64 CurrentDesktop: ubuntu:GNOME DistroRelease: Ubuntu 18.04 InstallationDate: Installed on 2018-05-29 (0 days ago) InstallationMedia: Ubuntu 18.04 LTS "Bionic Beaver" - Release amd64 (20180426) InterestingModules: rfcomm bnep btusb bluetooth Lsusb: Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub Bus 001 Device 003: ID 8087:0a2b Intel Corp. Bus 001 Device 002: ID 0bda:58f4 Realtek Semiconductor Corp. Bus 001 Device 004: ID 27c6:5385 Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub MachineType: Dell Inc. XPS 13 9370 Package: bluez 5.48-0ubuntu3 [origin: unknown] PackageArchitecture: amd64 ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-4.15.0-22-generic root=UUID=d6251f09-cbb5-4635-8f42-31e6c32f1c03 ro quiet splash vt.handoff=1 ProcVersionSignature: Ubuntu 4.15.0-22.24-generic 4.15.17 Tags: third-party-packages bionic Uname: Linux 4.15.0-22-generic x86_64 UnreportableReason: This is not an official Ubuntu package. Please remove any third party package and try again. UpgradeStatus: No upgrade log present (probably fresh install) UserGroups: adm cdrom dip lpadmin plugdev sambashare sudo _MarkForUpload: True dmi.bios.date: 11/03/2017 dmi.bios.vendor: Dell Inc. dmi.bios.version: 0.3.13 dmi.board.name: 0173S1 dmi.board.vendor: Dell Inc. dmi.board.version: A00 dmi.chassis.type: 9 dmi.chassis.vendor: Dell Inc. dmi.modalias: dmi:bvnDellInc.:bvr0.3.13:bd11/03/2017:svnDellInc.:pnXPS139370:pvr:rvnDellInc.:rn0173S1:rvrA00:cvnDellInc.:ct9:cvr: dmi.product.family: XPS dmi.product.name: XPS 13 9370 dmi.sys.vendor: Dell Inc. hciconfig: hci0:Type: Primary Bus: USB BD Address: D4:25:8B:4F:7E:D6 ACL MTU: 1021:4 SCO MTU: 96:6 UP RUNNING PSCAN ISCAN RX bytes:61781 acl:382 sco:0 events:536 errors:0 TX bytes:7985 acl:69 sco:0 commands:168 errors:0 To manage notifications about this bug go to: https://bugs.launchpad.net/bluez/+bug/1773897/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1773897] Re: [regression] Logitech M337 mice are automatically disconnected after connected
No it's not specific to Intel 8265. Can your M337 reconnect automatically after system suspend or system reboot? -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to bluez in Ubuntu. https://bugs.launchpad.net/bugs/1773897 Title: [regression] Logitech M337 mice are automatically disconnected after connected Status in Bluez Utilities: Confirmed Status in OEM Priority Project: Incomplete Status in bluez package in Ubuntu: Invalid Bug description: The BT 3.0 mouse is disconnected automatically after connected with the notebook. The fail rate is around 9/10. 1. The bug only occurs on the machine with intel 8265 module. I got three Dell XPS 13 (one is with Killer 1435, two are with intel 8265). This bug can not be reproduced on the machine with Killer 1435. 2. This bug can be reproduced since bluez 5.46. Using bluez 5.45, this bug can not be reproduced. Notebook: Dell XPS 13 Wi-Fi/BT module: intel 8265, 8087:0a2b bluez: 5.48 BT mouse: logitech M337 --- ApportVersion: 2.20.9-0ubuntu7 Architecture: amd64 CurrentDesktop: ubuntu:GNOME DistroRelease: Ubuntu 18.04 InstallationDate: Installed on 2018-05-29 (0 days ago) InstallationMedia: Ubuntu 18.04 LTS "Bionic Beaver" - Release amd64 (20180426) InterestingModules: rfcomm bnep btusb bluetooth Lsusb: Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub Bus 001 Device 003: ID 8087:0a2b Intel Corp. Bus 001 Device 002: ID 0bda:58f4 Realtek Semiconductor Corp. Bus 001 Device 004: ID 27c6:5385 Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub MachineType: Dell Inc. XPS 13 9370 Package: bluez 5.48-0ubuntu3 [origin: unknown] PackageArchitecture: amd64 ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-4.15.0-22-generic root=UUID=d6251f09-cbb5-4635-8f42-31e6c32f1c03 ro quiet splash vt.handoff=1 ProcVersionSignature: Ubuntu 4.15.0-22.24-generic 4.15.17 Tags: third-party-packages bionic Uname: Linux 4.15.0-22-generic x86_64 UnreportableReason: This is not an official Ubuntu package. Please remove any third party package and try again. UpgradeStatus: No upgrade log present (probably fresh install) UserGroups: adm cdrom dip lpadmin plugdev sambashare sudo _MarkForUpload: True dmi.bios.date: 11/03/2017 dmi.bios.vendor: Dell Inc. dmi.bios.version: 0.3.13 dmi.board.name: 0173S1 dmi.board.vendor: Dell Inc. dmi.board.version: A00 dmi.chassis.type: 9 dmi.chassis.vendor: Dell Inc. dmi.modalias: dmi:bvnDellInc.:bvr0.3.13:bd11/03/2017:svnDellInc.:pnXPS139370:pvr:rvnDellInc.:rn0173S1:rvrA00:cvnDellInc.:ct9:cvr: dmi.product.family: XPS dmi.product.name: XPS 13 9370 dmi.sys.vendor: Dell Inc. hciconfig: hci0:Type: Primary Bus: USB BD Address: D4:25:8B:4F:7E:D6 ACL MTU: 1021:4 SCO MTU: 96:6 UP RUNNING PSCAN ISCAN RX bytes:61781 acl:382 sco:0 events:536 errors:0 TX bytes:7985 acl:69 sco:0 commands:168 errors:0 To manage notifications about this bug go to: https://bugs.launchpad.net/bluez/+bug/1773897/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1773897] Re: [regression] Logitech M337 mice are automatically disconnected after connected
I am using a Logitech M337 on Ubuntu 18.04 via Intel 8265 right now and cannot reproduce any bug. If the problem ever was specific to Intel 8265 then it might have been fixed in firmware updates already here: https://launchpad.net/ubuntu/+source/linux-firmware While comment #50 is interesting, I don't think it is relevant to this bug at all. And this bug doesn't seem to exist any more anyway. ** No longer affects: gnome-bluetooth (Ubuntu) ** Changed in: oem-priority Status: Confirmed => Incomplete -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to bluez in Ubuntu. https://bugs.launchpad.net/bugs/1773897 Title: [regression] Logitech M337 mice are automatically disconnected after connected Status in Bluez Utilities: Confirmed Status in OEM Priority Project: Incomplete Status in bluez package in Ubuntu: Invalid Bug description: The BT 3.0 mouse is disconnected automatically after connected with the notebook. The fail rate is around 9/10. 1. The bug only occurs on the machine with intel 8265 module. I got three Dell XPS 13 (one is with Killer 1435, two are with intel 8265). This bug can not be reproduced on the machine with Killer 1435. 2. This bug can be reproduced since bluez 5.46. Using bluez 5.45, this bug can not be reproduced. Notebook: Dell XPS 13 Wi-Fi/BT module: intel 8265, 8087:0a2b bluez: 5.48 BT mouse: logitech M337 --- ApportVersion: 2.20.9-0ubuntu7 Architecture: amd64 CurrentDesktop: ubuntu:GNOME DistroRelease: Ubuntu 18.04 InstallationDate: Installed on 2018-05-29 (0 days ago) InstallationMedia: Ubuntu 18.04 LTS "Bionic Beaver" - Release amd64 (20180426) InterestingModules: rfcomm bnep btusb bluetooth Lsusb: Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub Bus 001 Device 003: ID 8087:0a2b Intel Corp. Bus 001 Device 002: ID 0bda:58f4 Realtek Semiconductor Corp. Bus 001 Device 004: ID 27c6:5385 Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub MachineType: Dell Inc. XPS 13 9370 Package: bluez 5.48-0ubuntu3 [origin: unknown] PackageArchitecture: amd64 ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-4.15.0-22-generic root=UUID=d6251f09-cbb5-4635-8f42-31e6c32f1c03 ro quiet splash vt.handoff=1 ProcVersionSignature: Ubuntu 4.15.0-22.24-generic 4.15.17 Tags: third-party-packages bionic Uname: Linux 4.15.0-22-generic x86_64 UnreportableReason: This is not an official Ubuntu package. Please remove any third party package and try again. UpgradeStatus: No upgrade log present (probably fresh install) UserGroups: adm cdrom dip lpadmin plugdev sambashare sudo _MarkForUpload: True dmi.bios.date: 11/03/2017 dmi.bios.vendor: Dell Inc. dmi.bios.version: 0.3.13 dmi.board.name: 0173S1 dmi.board.vendor: Dell Inc. dmi.board.version: A00 dmi.chassis.type: 9 dmi.chassis.vendor: Dell Inc. dmi.modalias: dmi:bvnDellInc.:bvr0.3.13:bd11/03/2017:svnDellInc.:pnXPS139370:pvr:rvnDellInc.:rn0173S1:rvrA00:cvnDellInc.:ct9:cvr: dmi.product.family: XPS dmi.product.name: XPS 13 9370 dmi.sys.vendor: Dell Inc. hciconfig: hci0:Type: Primary Bus: USB BD Address: D4:25:8B:4F:7E:D6 ACL MTU: 1021:4 SCO MTU: 96:6 UP RUNNING PSCAN ISCAN RX bytes:61781 acl:382 sco:0 events:536 errors:0 TX bytes:7985 acl:69 sco:0 commands:168 errors:0 To manage notifications about this bug go to: https://bugs.launchpad.net/bluez/+bug/1773897/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1822184] Re: clear_console locks up video when X is running and you log out from a plain text console
** Changed in: xorg-server Status: Unknown => New -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to bash in Ubuntu. https://bugs.launchpad.net/bugs/1822184 Title: clear_console locks up video when X is running and you log out from a plain text console Status in X.Org X server: New Status in bash package in Ubuntu: Opinion Status in xorg-server package in Ubuntu: Confirmed Status in xorg package in Debian: New Status in xorg-server package in Debian: Confirmed Bug description: References: https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=810660 https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=866898 If X is running and you switch to a plain text console (ie ctrl-alt-f3), log in as a regular user, and then log out, the display switches back to the graphical login screen and locks up. The system is still functioning (can ssh in, etc) but the video output is frozen. The underlying cause is: https://gitlab.freedesktop.org/xorg/xserver/issues/492 However, the problem can at least be worked around by making clear_console switch to tty 6 and back instead of switching to 1 and back. This patch corrects the problem: --- bash-4.4.18.orig/debian/clear_console.c 2019-03-28 12:09:02.415907787 -0400 +++ bash-4.4.18/debian/clear_console.c 2019-03-28 12:08:11.984366858 -0400 @@ -205,7 +205,7 @@ #if defined(__linux__) num = vtstat.v_active; #endif - tmp_num = (num == 1 ? 2 : 1); + tmp_num = (num == 6 ? 5 : 6); /* switch vt to clear the scrollback buffer */ if (ioctl(fd, VT_ACTIVATE, tmp_num)) To manage notifications about this bug go to: https://bugs.launchpad.net/xorg-server/+bug/1822184/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1812918] Re: Bose QC35 bluetooth audio cuts out and is disjoined in 18.04
[Expired for bluez (Ubuntu) because there has been no activity for 60 days.] ** Changed in: bluez (Ubuntu) Status: Incomplete => Expired -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to bluez in Ubuntu. https://bugs.launchpad.net/bugs/1812918 Title: Bose QC35 bluetooth audio cuts out and is disjoined in 18.04 Status in bluez package in Ubuntu: Expired Status in pulseaudio package in Ubuntu: Expired Bug description: Since upgrade Ubuntu 16.04 to 18.04, my bluetooth did not work fine, sound is disjoined 1) Ubuntu 18.04.1 LTS 2) apt-cache policy pkgname N: Impossible de trouver le paquet pkgname 3) With Ubuntu 16.04, my headset ( Bose QC35 ) was working fine by bluetooth connection 4) Sound is disjoined with Ubuntu 18.04 ProblemType: Bug DistroRelease: Ubuntu 18.04 Package: bluez 5.48-0ubuntu3.1 ProcVersionSignature: Ubuntu 4.15.0-43.46-generic 4.15.18 Uname: Linux 4.15.0-43-generic x86_64 ApportVersion: 2.20.9-0ubuntu7.5 Architecture: amd64 CurrentDesktop: ubuntu:GNOME Date: Tue Jan 22 21:47:25 2019 InterestingModules: rfcomm bnep btusb bluetooth MachineType: Gigabyte Technology Co., Ltd. To be filled by O.E.M. ProcEnviron: TERM=xterm-256color PATH=(custom, no user) XDG_RUNTIME_DIR= LANG=fr_FR.UTF-8 SHELL=/bin/bash ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-4.15.0-43-generic root=UUID=53832273-15e8-4b92-b0a3-6b1f2cf57770 ro quiet splash vt.handoff=1 SourcePackage: bluez UpgradeStatus: No upgrade log present (probably fresh install) dmi.bios.date: 01/08/2014 dmi.bios.vendor: American Megatrends Inc. dmi.bios.version: F3 dmi.board.asset.tag: To be filled by O.E.M. dmi.board.name: F2A78M-DS2 dmi.board.vendor: Gigabyte Technology Co., Ltd. dmi.board.version: x.x dmi.chassis.asset.tag: To Be Filled By O.E.M. dmi.chassis.type: 3 dmi.chassis.vendor: Gigabyte Technology Co., Ltd. dmi.chassis.version: To Be Filled By O.E.M. dmi.modalias: dmi:bvnAmericanMegatrendsInc.:bvrF3:bd01/08/2014:svnGigabyteTechnologyCo.,Ltd.:pnTobefilledbyO.E.M.:pvrTobefilledbyO.E.M.:rvnGigabyteTechnologyCo.,Ltd.:rnF2A78M-DS2:rvrx.x:cvnGigabyteTechnologyCo.,Ltd.:ct3:cvrToBeFilledByO.E.M.: dmi.product.family: To be filled by O.E.M. dmi.product.name: To be filled by O.E.M. dmi.product.version: To be filled by O.E.M. dmi.sys.vendor: Gigabyte Technology Co., Ltd. hciconfig: hci0:Type: Primary Bus: USB BD Address: 00:1B:10:00:2A:EC ACL MTU: 1017:8 SCO MTU: 64:0 UP RUNNING PSCAN INQUIRY RX bytes:2620674 acl:357 sco:53942 events:1739 errors:0 TX bytes:3630646 acl:4536 sco:0 commands:218 errors:0 To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/bluez/+bug/1812918/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1812918] Re: Bose QC35 bluetooth audio cuts out and is disjoined in 18.04
[Expired for pulseaudio (Ubuntu) because there has been no activity for 60 days.] ** Changed in: pulseaudio (Ubuntu) Status: Incomplete => Expired -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to bluez in Ubuntu. https://bugs.launchpad.net/bugs/1812918 Title: Bose QC35 bluetooth audio cuts out and is disjoined in 18.04 Status in bluez package in Ubuntu: Expired Status in pulseaudio package in Ubuntu: Expired Bug description: Since upgrade Ubuntu 16.04 to 18.04, my bluetooth did not work fine, sound is disjoined 1) Ubuntu 18.04.1 LTS 2) apt-cache policy pkgname N: Impossible de trouver le paquet pkgname 3) With Ubuntu 16.04, my headset ( Bose QC35 ) was working fine by bluetooth connection 4) Sound is disjoined with Ubuntu 18.04 ProblemType: Bug DistroRelease: Ubuntu 18.04 Package: bluez 5.48-0ubuntu3.1 ProcVersionSignature: Ubuntu 4.15.0-43.46-generic 4.15.18 Uname: Linux 4.15.0-43-generic x86_64 ApportVersion: 2.20.9-0ubuntu7.5 Architecture: amd64 CurrentDesktop: ubuntu:GNOME Date: Tue Jan 22 21:47:25 2019 InterestingModules: rfcomm bnep btusb bluetooth MachineType: Gigabyte Technology Co., Ltd. To be filled by O.E.M. ProcEnviron: TERM=xterm-256color PATH=(custom, no user) XDG_RUNTIME_DIR= LANG=fr_FR.UTF-8 SHELL=/bin/bash ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-4.15.0-43-generic root=UUID=53832273-15e8-4b92-b0a3-6b1f2cf57770 ro quiet splash vt.handoff=1 SourcePackage: bluez UpgradeStatus: No upgrade log present (probably fresh install) dmi.bios.date: 01/08/2014 dmi.bios.vendor: American Megatrends Inc. dmi.bios.version: F3 dmi.board.asset.tag: To be filled by O.E.M. dmi.board.name: F2A78M-DS2 dmi.board.vendor: Gigabyte Technology Co., Ltd. dmi.board.version: x.x dmi.chassis.asset.tag: To Be Filled By O.E.M. dmi.chassis.type: 3 dmi.chassis.vendor: Gigabyte Technology Co., Ltd. dmi.chassis.version: To Be Filled By O.E.M. dmi.modalias: dmi:bvnAmericanMegatrendsInc.:bvrF3:bd01/08/2014:svnGigabyteTechnologyCo.,Ltd.:pnTobefilledbyO.E.M.:pvrTobefilledbyO.E.M.:rvnGigabyteTechnologyCo.,Ltd.:rnF2A78M-DS2:rvrx.x:cvnGigabyteTechnologyCo.,Ltd.:ct3:cvrToBeFilledByO.E.M.: dmi.product.family: To be filled by O.E.M. dmi.product.name: To be filled by O.E.M. dmi.product.version: To be filled by O.E.M. dmi.sys.vendor: Gigabyte Technology Co., Ltd. hciconfig: hci0:Type: Primary Bus: USB BD Address: 00:1B:10:00:2A:EC ACL MTU: 1017:8 SCO MTU: 64:0 UP RUNNING PSCAN INQUIRY RX bytes:2620674 acl:357 sco:53942 events:1739 errors:0 TX bytes:3630646 acl:4536 sco:0 commands:218 errors:0 To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/bluez/+bug/1812918/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1822184] Re: clear_console locks up video when X is running and you log out from a plain text console
** Changed in: xorg-server (Debian) Status: Unknown => Confirmed ** Changed in: xorg (Debian) Status: Unknown => New -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to bash in Ubuntu. https://bugs.launchpad.net/bugs/1822184 Title: clear_console locks up video when X is running and you log out from a plain text console Status in X.Org X server: Unknown Status in bash package in Ubuntu: Opinion Status in xorg-server package in Ubuntu: Confirmed Status in xorg package in Debian: New Status in xorg-server package in Debian: Confirmed Bug description: References: https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=810660 https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=866898 If X is running and you switch to a plain text console (ie ctrl-alt-f3), log in as a regular user, and then log out, the display switches back to the graphical login screen and locks up. The system is still functioning (can ssh in, etc) but the video output is frozen. The underlying cause is: https://gitlab.freedesktop.org/xorg/xserver/issues/492 However, the problem can at least be worked around by making clear_console switch to tty 6 and back instead of switching to 1 and back. This patch corrects the problem: --- bash-4.4.18.orig/debian/clear_console.c 2019-03-28 12:09:02.415907787 -0400 +++ bash-4.4.18/debian/clear_console.c 2019-03-28 12:08:11.984366858 -0400 @@ -205,7 +205,7 @@ #if defined(__linux__) num = vtstat.v_active; #endif - tmp_num = (num == 1 ? 2 : 1); + tmp_num = (num == 6 ? 5 : 6); /* switch vt to clear the scrollback buffer */ if (ioctl(fd, VT_ACTIVATE, tmp_num)) To manage notifications about this bug go to: https://bugs.launchpad.net/xorg-server/+bug/1822184/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1822184] Re: clear_console locks up video when X is running and you log out from a plain text console
** Bug watch added: Debian Bug tracker #866898 https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=866898 ** Also affects: xorg (Debian) via https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=866898 Importance: Unknown Status: Unknown ** Bug watch added: Debian Bug tracker #810660 https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=810660 ** Also affects: xorg-server (Debian) via https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=810660 Importance: Unknown Status: Unknown ** Bug watch added: gitlab.freedesktop.org/xorg/xserver/issues #492 https://gitlab.freedesktop.org/xorg/xserver/issues/492 ** Also affects: xorg-server via https://gitlab.freedesktop.org/xorg/xserver/issues/492 Importance: Unknown Status: Unknown ** Also affects: xorg-server (Ubuntu) Importance: Undecided Status: New ** Changed in: bash (Ubuntu) Status: Confirmed => Opinion ** Changed in: xorg-server (Ubuntu) Status: New => Confirmed -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to bash in Ubuntu. https://bugs.launchpad.net/bugs/1822184 Title: clear_console locks up video when X is running and you log out from a plain text console Status in X.Org X server: Unknown Status in bash package in Ubuntu: Opinion Status in xorg-server package in Ubuntu: Confirmed Status in xorg package in Debian: Unknown Status in xorg-server package in Debian: Unknown Bug description: References: https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=810660 https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=866898 If X is running and you switch to a plain text console (ie ctrl-alt-f3), log in as a regular user, and then log out, the display switches back to the graphical login screen and locks up. The system is still functioning (can ssh in, etc) but the video output is frozen. The underlying cause is: https://gitlab.freedesktop.org/xorg/xserver/issues/492 However, the problem can at least be worked around by making clear_console switch to tty 6 and back instead of switching to 1 and back. This patch corrects the problem: --- bash-4.4.18.orig/debian/clear_console.c 2019-03-28 12:09:02.415907787 -0400 +++ bash-4.4.18/debian/clear_console.c 2019-03-28 12:08:11.984366858 -0400 @@ -205,7 +205,7 @@ #if defined(__linux__) num = vtstat.v_active; #endif - tmp_num = (num == 1 ? 2 : 1); + tmp_num = (num == 6 ? 5 : 6); /* switch vt to clear the scrollback buffer */ if (ioctl(fd, VT_ACTIVATE, tmp_num)) To manage notifications about this bug go to: https://bugs.launchpad.net/xorg-server/+bug/1822184/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1822184] Re: clear_console locks up video when X is running and you log out from a plain text console
Status changed to 'Confirmed' because the bug affects multiple users. ** Changed in: bash (Ubuntu) Status: New => Confirmed -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to bash in Ubuntu. https://bugs.launchpad.net/bugs/1822184 Title: clear_console locks up video when X is running and you log out from a plain text console Status in bash package in Ubuntu: Confirmed Bug description: References: https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=810660 https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=866898 If X is running and you switch to a plain text console (ie ctrl-alt-f3), log in as a regular user, and then log out, the display switches back to the graphical login screen and locks up. The system is still functioning (can ssh in, etc) but the video output is frozen. The underlying cause is: https://gitlab.freedesktop.org/xorg/xserver/issues/492 However, the problem can at least be worked around by making clear_console switch to tty 6 and back instead of switching to 1 and back. This patch corrects the problem: --- bash-4.4.18.orig/debian/clear_console.c 2019-03-28 12:09:02.415907787 -0400 +++ bash-4.4.18/debian/clear_console.c 2019-03-28 12:08:11.984366858 -0400 @@ -205,7 +205,7 @@ #if defined(__linux__) num = vtstat.v_active; #endif - tmp_num = (num == 1 ? 2 : 1); + tmp_num = (num == 6 ? 5 : 6); /* switch vt to clear the scrollback buffer */ if (ioctl(fd, VT_ACTIVATE, tmp_num)) To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/bash/+bug/1822184/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1822179] Re: Resuming from sleep breaks desktop and lock screen background in GNOME
*** This bug is a duplicate of bug 1576859 *** https://bugs.launchpad.net/bugs/1576859 Thank you for taking the time to report this bug and helping to make Ubuntu better. This particular bug has already been reported and is a duplicate of bug 1576859, so it is being marked as such. Please look at the other bug report to see if there is any missing information that you can provide, or to see if there is a workaround for the bug. Additionally, any further discussion regarding the bug should occur in the other report. Feel free to continue to report any other bugs you may find. ** Package changed: xorg (Ubuntu) => gnome-shell (Ubuntu) ** This bug has been marked a duplicate of bug 1576859 [nvidia] Graphics corruption when resuming from suspend -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to xorg in Ubuntu. https://bugs.launchpad.net/bugs/1822179 Title: Resuming from sleep breaks desktop and lock screen background in GNOME Status in gnome-shell package in Ubuntu: New Bug description: CPU: AMD Ryzen 5 1600 MOBO: MSI B350M MORTAR GPU: NVIDIA GTX 1060 Ubuntu version: 19.04 Nvidia driver version: 418.56 The system is updated with the latest updates as today, 28 March 2019 As the title says, in Ubuntu 19.04 the GNOME lockscreen gets corrupted, and the GNOME desktop has blank background after resuming from standby/sleep To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/gnome-shell/+bug/1822179/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1822073] Re: Bluetooth headset profile forgotten after disconnection
I stand corrected. There is also ~/.config/pulse ** Also affects: pulseaudio (Ubuntu) Importance: Undecided Status: New ** Changed in: pulseaudio (Ubuntu) Status: New => Confirmed ** No longer affects: gnome-control-center (Ubuntu) -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to pulseaudio in Ubuntu. https://bugs.launchpad.net/bugs/1822073 Title: Bluetooth headset profile forgotten after disconnection Status in pulseaudio package in Ubuntu: Confirmed Bug description: Similar to bug 1283003, after connecting my Bluetooth headset (Sony WH-1000X M3) they appear in Gnome Control Centre's Sound tab but are not selectable. I've narrowed down the circumstances to reproduce the bug as follows: 1. Start with working sound through Bluetooth to headset 2. In pavucontrol's Configuration tab, note that headset is listed with A2DP profile 3. Disconnect (power off) the headset 4. Note that sound comes out of fallback device (as expected) 5. Power on the headset and reconnect to Bluetooth 6. Look in Gnome Control Centre and note the headset appears in Sound, but is not selectable (buggy) 7. In pavucontrol's Configuration tab, note headset is listed with "Off" 8. Manually switch to A2DP 9. At the point, we have to cycle the connection again (disconnect/reconnect) and then sound is once more routed to the headset. ProblemType: Bug DistroRelease: Ubuntu 18.04 Package: pulseaudio 1:11.1-1ubuntu7.2 ProcVersionSignature: Ubuntu 4.15.0-46.49-generic 4.15.18 Uname: Linux 4.15.0-46-generic x86_64 NonfreeKernelModules: zfs zunicode zavl icp zcommon znvpair nvidia_modeset nvidia ApportVersion: 2.20.9-0ubuntu7.6 Architecture: amd64 CurrentDesktop: ubuntu:GNOME Date: Thu Mar 28 10:33:37 2019 InstallationDate: Installed on 2015-07-04 (1363 days ago) InstallationMedia: Ubuntu 15.04 "Vivid Vervet" - Release amd64 (20150422) SourcePackage: pulseaudio UpgradeStatus: No upgrade log present (probably fresh install) dmi.bios.date: 12/23/2014 dmi.bios.vendor: American Megatrends Inc. dmi.bios.version: V1.9 dmi.board.asset.tag: To be filled by O.E.M. dmi.board.name: Z97 GAMING 5 (MS-7917) dmi.board.vendor: MSI dmi.board.version: 1.0 dmi.chassis.asset.tag: To be filled by O.E.M. dmi.chassis.type: 3 dmi.chassis.vendor: MSI dmi.chassis.version: 1.0 dmi.modalias: dmi:bvnAmericanMegatrendsInc.:bvrV1.9:bd12/23/2014:svnMSI:pnMS-7917:pvr1.0:rvnMSI:rnZ97GAMING5(MS-7917):rvr1.0:cvnMSI:ct3:cvr1.0: dmi.product.family: To be filled by O.E.M. dmi.product.name: MS-7917 dmi.product.version: 1.0 dmi.sys.vendor: MSI To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/pulseaudio/+bug/1822073/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1822073] Re: Bluetooth headset profile forgotten after disconnection
AFAIK, only gnome-control-center has any memory of user preferences. So reassigning there. ** Tags added: a2dp ** Package changed: pulseaudio (Ubuntu) => gnome-control-center (Ubuntu) -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to pulseaudio in Ubuntu. https://bugs.launchpad.net/bugs/1822073 Title: Bluetooth headset profile forgotten after disconnection Status in pulseaudio package in Ubuntu: Confirmed Bug description: Similar to bug 1283003, after connecting my Bluetooth headset (Sony WH-1000X M3) they appear in Gnome Control Centre's Sound tab but are not selectable. I've narrowed down the circumstances to reproduce the bug as follows: 1. Start with working sound through Bluetooth to headset 2. In pavucontrol's Configuration tab, note that headset is listed with A2DP profile 3. Disconnect (power off) the headset 4. Note that sound comes out of fallback device (as expected) 5. Power on the headset and reconnect to Bluetooth 6. Look in Gnome Control Centre and note the headset appears in Sound, but is not selectable (buggy) 7. In pavucontrol's Configuration tab, note headset is listed with "Off" 8. Manually switch to A2DP 9. At the point, we have to cycle the connection again (disconnect/reconnect) and then sound is once more routed to the headset. ProblemType: Bug DistroRelease: Ubuntu 18.04 Package: pulseaudio 1:11.1-1ubuntu7.2 ProcVersionSignature: Ubuntu 4.15.0-46.49-generic 4.15.18 Uname: Linux 4.15.0-46-generic x86_64 NonfreeKernelModules: zfs zunicode zavl icp zcommon znvpair nvidia_modeset nvidia ApportVersion: 2.20.9-0ubuntu7.6 Architecture: amd64 CurrentDesktop: ubuntu:GNOME Date: Thu Mar 28 10:33:37 2019 InstallationDate: Installed on 2015-07-04 (1363 days ago) InstallationMedia: Ubuntu 15.04 "Vivid Vervet" - Release amd64 (20150422) SourcePackage: pulseaudio UpgradeStatus: No upgrade log present (probably fresh install) dmi.bios.date: 12/23/2014 dmi.bios.vendor: American Megatrends Inc. dmi.bios.version: V1.9 dmi.board.asset.tag: To be filled by O.E.M. dmi.board.name: Z97 GAMING 5 (MS-7917) dmi.board.vendor: MSI dmi.board.version: 1.0 dmi.chassis.asset.tag: To be filled by O.E.M. dmi.chassis.type: 3 dmi.chassis.vendor: MSI dmi.chassis.version: 1.0 dmi.modalias: dmi:bvnAmericanMegatrendsInc.:bvrV1.9:bd12/23/2014:svnMSI:pnMS-7917:pvr1.0:rvnMSI:rnZ97GAMING5(MS-7917):rvr1.0:cvnMSI:ct3:cvr1.0: dmi.product.family: To be filled by O.E.M. dmi.product.name: MS-7917 dmi.product.version: 1.0 dmi.sys.vendor: MSI To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/pulseaudio/+bug/1822073/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1822075] Re: tooltips and combo boxes in webbrowsers are all garbage in xserver-xorg-video-radeon 1:19.0.0-1
** Summary changed: - tooltips and combo boxes in webbrowsers are all garbage + tooltips and combo boxes in webbrowsers are all garbage in xserver-xorg-video-radeon 1:19.0.0-1 -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to mesa in Ubuntu. https://bugs.launchpad.net/bugs/1822075 Title: tooltips and combo boxes in webbrowsers are all garbage in xserver- xorg-video-radeon 1:19.0.0-1 Status in gtk+3.0 package in Ubuntu: Invalid Status in mesa package in Ubuntu: Invalid Status in mutter package in Ubuntu: Invalid Status in xserver-xorg-video-ati package in Ubuntu: Triaged Bug description: Disco up to date With Chrome and Firefox tooltips and combo boxes are all garbage and make the browser unusable. Cf screenshots. Graphics card: Advanced Micro Devices, Inc. [AMD/ATI] Juniper XT [Radeon HD 5770] I tried gtk2 and gtk3 demos and the combo boxes are broken in the same way. I also tried FF as a snap and as a deb and the problem is the same. ProblemType: Bug DistroRelease: Ubuntu 19.04 Package: gnome-shell 3.32.0-1ubuntu1 ProcVersionSignature: Ubuntu 5.0.0-7.8-generic 5.0.0 Uname: Linux 5.0.0-7-generic x86_64 NonfreeKernelModules: zfs zunicode zavl icp zcommon znvpair ApportVersion: 2.20.10-0ubuntu23 Architecture: amd64 CurrentDesktop: ubuntu:GNOME Date: Thu Mar 28 11:51:41 2019 DisplayManager: gdm3 InstallationDate: Installed on 2014-07-15 (1717 days ago) InstallationMedia: Ubuntu 14.10 "Utopic Unicorn" - Alpha amd64 (20140520) SourcePackage: gnome-shell UpgradeStatus: Upgraded to disco on 2018-03-24 (368 days ago) To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/gtk+3.0/+bug/1822075/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1822047] Re: After install, cannot boot into system unless I use nomodeset kernel parameter (repeated kernel crashes in the nouveau driver)
*** This bug is a duplicate of bug 1822026 *** https://bugs.launchpad.net/bugs/1822026 ** Summary changed: - After install, cannot boot into system unless I use nomodeset kernel parameter + After install, cannot boot into system unless I use nomodeset kernel parameter (repeated kernel crashes in the nouveau driver) -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to xorg in Ubuntu. https://bugs.launchpad.net/bugs/1822047 Title: After install, cannot boot into system unless I use nomodeset kernel parameter (repeated kernel crashes in the nouveau driver) Status in xorg package in Ubuntu: Incomplete Bug description: System: Disco (19.04 beta) Hardware: Dell Precision 7530 After installing the system, it cannot start unless manually adding `nomodeset` in the kernel command line at boot time. Steps to reproduce: 1. Install disco 19.04 beta on the device. Leave all the options at default values (i.e. do not install third party drivers) 2. Once installation is finished, restart the system (the system will freeze after install is finished, it's a known issue -> lp:1822044) Expected result: 2. The system boots and user can log in and see Gnome interface. Actual result: 2. The first time, I could log into the system. However, when I tried to access the Settings screen, the system froze. After that, everytime I tried to boot the device, the screen was filled with dark purple, a mouse cursor may appear, but nothing else would happen. At that stage, the only thing I could do was to force shutdown the device, start it again and at Grub screen, press `e` to edit the kernel parameters and add `nomodeset`. This bug is created from the actual device, using `nomodeset` kernel parameter. `nouveau` graphics driver is most likely the culprit, like in all the previous issues that have been raised (see lp:1822026, lp:1822044, lp:1821882) Two workarounds exist: 1. After installation, use `nomodeset` kernel parameter to boot into the system, then install proprietary nvidia drivers. 2. During installation, install third party drivers. If Secure Boot is enabled, this requires to set a password that will be asked when the device reboots. ProblemType: Bug DistroRelease: Ubuntu 19.04 Package: xorg 1:7.7+19ubuntu12 ProcVersionSignature: Ubuntu 5.0.0-7.8-generic 5.0.0 Uname: Linux 5.0.0-7-generic x86_64 ApportVersion: 2.20.10-0ubuntu23 Architecture: amd64 BootLog: Error: [Errno 13] Permission denied: '/var/log/boot.log' CompositorRunning: None CurrentDesktop: ubuntu:GNOME Date: Thu Mar 28 15:39:40 2019 DistUpgraded: Fresh install DistroCodename: disco DistroVariant: ubuntu ExtraDebuggingInterest: Yes GraphicsCard: Intel Corporation UHD Graphics 630 (Mobile) [8086:3e9b] (prog-if 00 [VGA controller]) Subsystem: Dell UHD Graphics 630 (Mobile) [1028:0889] NVIDIA Corporation GP107GLM [Quadro P1000 Mobile] [10de:1cbb] (rev a1) (prog-if 00 [VGA controller]) Subsystem: Dell GP107GLM [Quadro P1000 Mobile] [1028:0889] InstallationDate: Installed on 2019-03-28 (0 days ago) InstallationMedia: Ubuntu 19.04 "Disco Dingo" - Alpha amd64 (20190326.2) MachineType: Dell Inc. Precision 7530 ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-5.0.0-7-generic root=UUID=e07663b1-0b3d-4cdb-aa6c-f6f2e8c4ee5d ro quiet splash nomodeset vt.handoff=1 SourcePackage: xorg UpgradeStatus: No upgrade log present (probably fresh install) dmi.bios.date: 02/19/2019 dmi.bios.vendor: Dell Inc. dmi.bios.version: 1.7.0 dmi.board.vendor: Dell Inc. dmi.chassis.type: 10 dmi.chassis.vendor: Dell Inc. dmi.modalias: dmi:bvnDellInc.:bvr1.7.0:bd02/19/2019:svnDellInc.:pnPrecision7530:pvr:rvnDellInc.:rn:rvr:cvnDellInc.:ct10:cvr: dmi.product.family: Precision dmi.product.name: Precision 7530 dmi.product.sku: 0889 dmi.sys.vendor: Dell Inc. version.compiz: compiz N/A version.libdrm2: libdrm2 2.4.97-1 version.libgl1-mesa-dri: libgl1-mesa-dri 19.0.0-1ubuntu1 version.libgl1-mesa-glx: libgl1-mesa-glx N/A version.xserver-xorg-core: xserver-xorg-core 2:1.20.4-1ubuntu2 version.xserver-xorg-input-evdev: xserver-xorg-input-evdev N/A version.xserver-xorg-video-ati: xserver-xorg-video-ati 1:19.0.0-1 version.xserver-xorg-video-intel: xserver-xorg-video-intel 2:2.99.917+git20180925-2 version.xserver-xorg-video-nouveau: xserver-xorg-video-nouveau 1:1.0.16-1 To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/xorg/+bug/1822047/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1784485] Re: [ZenBook S UX391UA, Realtek ALC294, Mic, Internal] No sound at all
The kernel fix (comment #77) only checks for the laptop model name, not anything else. So it will only work for "ASUS UX391UA". If you have a different model of laptop then please open a different bug. https://mailman.alsa-project.org/pipermail/alsa- devel/2018-December/143282.html ** No longer affects: alsa-driver (Ubuntu) ** Also affects: linux (Ubuntu Disco) Importance: Undecided Status: Fix Committed ** Also affects: linux (Ubuntu Bionic) Importance: Undecided Status: New ** Also affects: linux (Ubuntu Cosmic) Importance: Undecided Status: New ** Changed in: linux (Ubuntu Disco) Status: Fix Committed => Fix Released ** Changed in: linux (Ubuntu Cosmic) Status: New => Confirmed ** Changed in: linux (Ubuntu Bionic) Status: New => Confirmed -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to alsa-driver in Ubuntu. https://bugs.launchpad.net/bugs/1784485 Title: [ZenBook S UX391UA, Realtek ALC294, Mic, Internal] No sound at all Status in linux package in Ubuntu: Fix Released Status in linux source package in Bionic: Confirmed Status in linux source package in Cosmic: Confirmed Status in linux source package in Disco: Fix Released Bug description: Internal speaker - not sound at all Cable Headphonse - realy quiet disorted sound Bluetooth headphones - sound works fine On Windows 10 everything works fine. ProblemType: Bug DistroRelease: Ubuntu 18.04 Package: alsa-base 1.0.25+dfsg-0ubuntu5 ProcVersionSignature: Ubuntu 4.15.0-29.31-generic 4.15.18 Uname: Linux 4.15.0-29-generic x86_64 ApportVersion: 2.20.9-0ubuntu7.2 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: pmichalski 7964 F pulseaudio CurrentDesktop: ubuntu:GNOME Date: Mon Jul 30 22:32:10 2018 InstallationDate: Installed on 2018-07-17 (12 days ago) InstallationMedia: Ubuntu 18.04 LTS "Bionic Beaver" - Release amd64 (20180426) PackageArchitecture: all ProcEnviron: TERM=xterm-256color PATH=(custom, no user) XDG_RUNTIME_DIR= LANG=pl_PL.UTF-8 SHELL=/bin/bash SourcePackage: alsa-driver Symptom: audio Symptom_AlsaRecordingTest: ALSA recording test through plughw:PCH failed Symptom_Card: Wbudowany dźwięk - HDA Intel PCH Symptom_DevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: gdm2988 F pulseaudio pmichalski 7964 F pulseaudio Symptom_Jack: Mic, Internal Symptom_Type: No sound at all Title: [ZenBook S UX391UA, Realtek ALC294, Mic, Internal] No sound at all UpgradeStatus: No upgrade log present (probably fresh install) dmi.bios.date: 05/18/2018 dmi.bios.vendor: American Megatrends Inc. dmi.bios.version: UX391UA.204 dmi.board.asset.tag: ATN12345678901234567 dmi.board.name: UX391UA dmi.board.vendor: ASUSTeK COMPUTER INC. dmi.board.version: 1.0 dmi.chassis.asset.tag: No Asset Tag dmi.chassis.type: 10 dmi.chassis.vendor: ASUSTeK COMPUTER INC. dmi.chassis.version: 1.0 dmi.modalias: dmi:bvnAmericanMegatrendsInc.:bvrUX391UA.204:bd05/18/2018:svnASUSTeKCOMPUTERINC.:pnZenBookSUX391UA:pvr1.0:rvnASUSTeKCOMPUTERINC.:rnUX391UA:rvr1.0:cvnASUSTeKCOMPUTERINC.:ct10:cvr1.0: dmi.product.family: ZenBook S dmi.product.name: ZenBook S UX391UA dmi.product.version: 1.0 dmi.sys.vendor: ASUSTeK COMPUTER INC. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1784485/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1821936] Re: No sound output on Zen AIO 27 Z272SD_Z272SD
I think you might be right about bug 1784485 being similar. In that case this would be a kernel bug. And the title should refer to the model of the computer instead of the model of sound chip. ** Summary changed: - No sound output from ALC274 + No sound output on Zen AIO 27 Z272SD_Z272SD ** No longer affects: pulseaudio (Ubuntu) ** No longer affects: alsa-driver (Ubuntu) -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to alsa-driver in Ubuntu. https://bugs.launchpad.net/bugs/1821936 Title: No sound output on Zen AIO 27 Z272SD_Z272SD Status in linux package in Ubuntu: New Bug description: I find this to be an issue with current LTS 18.04's latest 4.19 kernel. I tested this on mainline 4.20 and 5.0 kernels as well. No audio because ALC274 not properly loaded for use, so no audio output. A related card had a similar bug, which was fixed, and may be of use in resolving this one: https://bugs.launchpad.net/ubuntu/+source/alsa-driver/+bug/1784485 # cat /proc/asound/card0/codec* | grep Codec Codec: Realtek ALC274 Codec: Intel Kabylake HDMI # cat /proc/asound/card0/pcm0c/info card: 0 device: 0 subdevice: 0 stream: CAPTURE id: ALC274 Analog name: ALC274 Analog subname: subdevice #0 class: 0 subclass: 0 subdevices_count: 1 subdevices_avail: 0 aplay -l List of PLAYBACK Hardware Devices card 0: PCH [HDA Intel PCH], device 0: ALC274 Analog [ALC274 Analog] Subdevices: 1/1 Subdevice #0: subdevice #0 card 0: PCH [HDA Intel PCH], device 3: HDMI 0 [HDMI 0] Subdevices: 1/1 Subdevice #0: subdevice #0 card 0: PCH [HDA Intel PCH], device 7: HDMI 1 [HDMI 1] Subdevices: 1/1 Subdevice #0: subdevice #0 card 0: PCH [HDA Intel PCH], device 8: HDMI 2 [HDMI 2] Subdevices: 1/1 Subdevice #0: subdevice #0 card 0: PCH [HDA Intel PCH], device 9: HDMI 3 [HDMI 3] Subdevices: 1/1 Subdevice #0: subdevice #0 card 0: PCH [HDA Intel PCH], device 10: HDMI 4 [HDMI 4] Subdevices: 1/1 Subdevice #0: subdevice #0 d# hwinfo --sound 21: PCI 1f.3: 0403 Audio device [Created at pci.378] Unique ID: nS1_.WnojYJLVCm0 SysFS ID: /devices/pci:00/:00:1f.3 SysFS BusID: :00:1f.3 Hardware Class: sound Model: "Intel Audio device" Vendor: pci 0x8086 "Intel Corporation" Device: pci 0xa348 SubVendor: pci 0x1043 "ASUSTeK Computer Inc." SubDevice: pci 0x31d0 Revision: 0x10 Driver: "snd_hda_intel" Driver Modules: "snd_hda_intel" Memory Range: 0xdd398000-0xdd39bfff (rw,non-prefetchable) Memory Range: 0xdd10-0xdd1f (rw,non-prefetchable) IRQ: 145 (663 events) Module Alias: "pci:v8086dA348sv1043sd31D0bc04sc03i80" Driver Info #0: Driver Status: snd_hda_intel is active Driver Activation Cmd: "modprobe snd_hda_intel" Config Status: cfg=new, avail=yes, need=no, active=unknown --- ProblemType: Bug ApportVersion: 2.20.9-0ubuntu7.6 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: gdm1903 F pulseaudio derek 2464 F pulseaudio DistroRelease: Ubuntu 18.04 InstallationDate: Installed on 2019-03-23 (5 days ago) InstallationMedia: Ubuntu 18.04.2 LTS "Bionic Beaver" - Release amd64 (20190210) MachineType: ASUSTeK COMPUTER INC. Zen AIO 27 Z272SD_Z272SD NonfreeKernelModules: nvidia_modeset nvidia Package: linux (not installed) ProcEnviron: TERM=xterm-256color PATH=(custom, no user) XDG_RUNTIME_DIR= LANG=en_US.UTF-8 SHELL=/bin/bash ProcFB: 0 inteldrmfb ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-4.18.0-16-generic root=UUID=a3d569a1-6262-4609-b2f5-199dbabf57cb ro quiet splash ProcVersionSignature: Ubuntu 4.18.0-16.17~18.04.1-generic 4.18.20 PulseList: Error: command ['pacmd', 'list'] failed with exit code 1: No PulseAudio daemon running, or not running as session daemon. RelatedPackageVersions: linux-restricted-modules-4.18.0-16-generic N/A linux-backports-modules-4.18.0-16-generic N/A linux-firmware 1.173.3 Tags: bionic Uname: Linux 4.18.0-16-generic x86_64 UpgradeStatus: No upgrade log present (probably fresh install) UserGroups: _MarkForUpload: True dmi.bios.date: 09/26/2018 dmi.bios.vendor: American Megatrends Inc. dmi.bios.version: Z272SD.300 dmi.board.asset.tag: ATN12345678901234567 dmi.board.name: Z272SD dmi.board.vendor: ASUSTeK COMPUTER INC. dmi.board.version: 1.0 dmi.chassis.asset.tag: No Asset Tag dmi.chassis.type: 13 dmi.chassis.vendor: ASUSTeK COMPUTER INC. dmi.chassis.version: 1.0 dmi.modalias: dmi:bvnAmericanMegatrendsInc.:bvrZ272SD.300:bd09/26/2018:svnASUSTeKCOMPUTERINC.:pnZenAIO27Z272SD_Z272SD:pvr1.0:rvnASUSTeKCOMPUTERINC.:rnZ272SD:rvr1.0:cvnASUSTeKCOMPUTERINC.:ct13:cvr1.0: dmi.product.family:
[Touch-packages] [Bug 1821936] Re: No sound output from ALC274
** Summary changed: - ALC274 unsupported + No sound output from ALC274 ** Also affects: pulseaudio (Ubuntu) Importance: Undecided Status: New ** Changed in: linux (Ubuntu) Status: Incomplete => New ** Changed in: alsa-driver (Ubuntu) Status: Incomplete => New -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to alsa-driver in Ubuntu. https://bugs.launchpad.net/bugs/1821936 Title: No sound output on Zen AIO 27 Z272SD_Z272SD Status in linux package in Ubuntu: New Bug description: I find this to be an issue with current LTS 18.04's latest 4.19 kernel. I tested this on mainline 4.20 and 5.0 kernels as well. No audio because ALC274 not properly loaded for use, so no audio output. A related card had a similar bug, which was fixed, and may be of use in resolving this one: https://bugs.launchpad.net/ubuntu/+source/alsa-driver/+bug/1784485 # cat /proc/asound/card0/codec* | grep Codec Codec: Realtek ALC274 Codec: Intel Kabylake HDMI # cat /proc/asound/card0/pcm0c/info card: 0 device: 0 subdevice: 0 stream: CAPTURE id: ALC274 Analog name: ALC274 Analog subname: subdevice #0 class: 0 subclass: 0 subdevices_count: 1 subdevices_avail: 0 aplay -l List of PLAYBACK Hardware Devices card 0: PCH [HDA Intel PCH], device 0: ALC274 Analog [ALC274 Analog] Subdevices: 1/1 Subdevice #0: subdevice #0 card 0: PCH [HDA Intel PCH], device 3: HDMI 0 [HDMI 0] Subdevices: 1/1 Subdevice #0: subdevice #0 card 0: PCH [HDA Intel PCH], device 7: HDMI 1 [HDMI 1] Subdevices: 1/1 Subdevice #0: subdevice #0 card 0: PCH [HDA Intel PCH], device 8: HDMI 2 [HDMI 2] Subdevices: 1/1 Subdevice #0: subdevice #0 card 0: PCH [HDA Intel PCH], device 9: HDMI 3 [HDMI 3] Subdevices: 1/1 Subdevice #0: subdevice #0 card 0: PCH [HDA Intel PCH], device 10: HDMI 4 [HDMI 4] Subdevices: 1/1 Subdevice #0: subdevice #0 d# hwinfo --sound 21: PCI 1f.3: 0403 Audio device [Created at pci.378] Unique ID: nS1_.WnojYJLVCm0 SysFS ID: /devices/pci:00/:00:1f.3 SysFS BusID: :00:1f.3 Hardware Class: sound Model: "Intel Audio device" Vendor: pci 0x8086 "Intel Corporation" Device: pci 0xa348 SubVendor: pci 0x1043 "ASUSTeK Computer Inc." SubDevice: pci 0x31d0 Revision: 0x10 Driver: "snd_hda_intel" Driver Modules: "snd_hda_intel" Memory Range: 0xdd398000-0xdd39bfff (rw,non-prefetchable) Memory Range: 0xdd10-0xdd1f (rw,non-prefetchable) IRQ: 145 (663 events) Module Alias: "pci:v8086dA348sv1043sd31D0bc04sc03i80" Driver Info #0: Driver Status: snd_hda_intel is active Driver Activation Cmd: "modprobe snd_hda_intel" Config Status: cfg=new, avail=yes, need=no, active=unknown --- ProblemType: Bug ApportVersion: 2.20.9-0ubuntu7.6 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: gdm1903 F pulseaudio derek 2464 F pulseaudio DistroRelease: Ubuntu 18.04 InstallationDate: Installed on 2019-03-23 (5 days ago) InstallationMedia: Ubuntu 18.04.2 LTS "Bionic Beaver" - Release amd64 (20190210) MachineType: ASUSTeK COMPUTER INC. Zen AIO 27 Z272SD_Z272SD NonfreeKernelModules: nvidia_modeset nvidia Package: linux (not installed) ProcEnviron: TERM=xterm-256color PATH=(custom, no user) XDG_RUNTIME_DIR= LANG=en_US.UTF-8 SHELL=/bin/bash ProcFB: 0 inteldrmfb ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-4.18.0-16-generic root=UUID=a3d569a1-6262-4609-b2f5-199dbabf57cb ro quiet splash ProcVersionSignature: Ubuntu 4.18.0-16.17~18.04.1-generic 4.18.20 PulseList: Error: command ['pacmd', 'list'] failed with exit code 1: No PulseAudio daemon running, or not running as session daemon. RelatedPackageVersions: linux-restricted-modules-4.18.0-16-generic N/A linux-backports-modules-4.18.0-16-generic N/A linux-firmware 1.173.3 Tags: bionic Uname: Linux 4.18.0-16-generic x86_64 UpgradeStatus: No upgrade log present (probably fresh install) UserGroups: _MarkForUpload: True dmi.bios.date: 09/26/2018 dmi.bios.vendor: American Megatrends Inc. dmi.bios.version: Z272SD.300 dmi.board.asset.tag: ATN12345678901234567 dmi.board.name: Z272SD dmi.board.vendor: ASUSTeK COMPUTER INC. dmi.board.version: 1.0 dmi.chassis.asset.tag: No Asset Tag dmi.chassis.type: 13 dmi.chassis.vendor: ASUSTeK COMPUTER INC. dmi.chassis.version: 1.0 dmi.modalias: dmi:bvnAmericanMegatrendsInc.:bvrZ272SD.300:bd09/26/2018:svnASUSTeKCOMPUTERINC.:pnZenAIO27Z272SD_Z272SD:pvr1.0:rvnASUSTeKCOMPUTERINC.:rnZ272SD:rvr1.0:cvnASUSTeKCOMPUTERINC.:ct13:cvr1.0: dmi.product.family: Zen AIO dmi.product.name: Zen AIO 27 Z272SD_Z272SD dmi.product.version: 1.0
[Touch-packages] [Bug 701856] Re: Brother's printer/scanner drivers awkward to find and install
I just upgraded to from Xenial 16.04 to Bionic 18.04 and unfortunately the scanner broke again. Unfortunately the changes affect two places -- udev seems to have made big changes to the scanner section, so I wrote a completely new udev file, and the sane-dll backend doesn't look in the same directory. I composed my new udev script, then after lots of tinkering and some judicious use of the debug command: $ SANE_DEBUG_DLL=128 scanimage -L I discovered the changes to the sane-dll backend. I installed an instance of Trusty 14.04 and used the above command to confirm Trusty looked for brother2 in: /usr/lib/x86_64-linux-gnu/sane /usr/lib/sane Bionic ONLY looks for brother2 in: /usr/lib/x86_64-linux-gnu/sane I manually linked the files the brscan2 .deb installs into /usr/lib/x86_64-linux-gnu/sane/ and /usr/lib/x86_64-linux-gnu/ into /usr/lib/x86_64-linux-gnu/sane/ and /usr/lib/x86_64-linux-gnu/ and it seems to work. I will attempt to write up a procedure (for my benefit if nothing else). But it may take me a little while. -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to cups in Ubuntu. https://bugs.launchpad.net/bugs/701856 Title: Brother's printer/scanner drivers awkward to find and install Status in cups package in Ubuntu: Opinion Bug description: Binary package hint: cupsys Hello, I have the multifonction laser printer and scan Brother DCP-7030. It works very well in Ubuntu, but with some hard configuration. Printer is automatically detected when connected in USB, but Ubuntu does not propose DCP-7030 drivers, only DCP-7025, and it doesn't work well. To get DCP-7030 fully recognized and well printing / scanning, I have to do this (it's a short summary) : http://solutions.brother.com/linux/en_us/before.html - Printer BROTHER DCP-7030 : cd ~/desktop sudo aa-complain cupsd sudo mkdir /usr/share/cups/model http://solutions.brother.com/linux/en_us/download_prn.html#DCP-7030 sudo dpkg -i --force-all --force-architecture brdcp7030lpr-2.0.2-1.i386.deb sudo dpkg -i --force-all --force-architecture cupswrapperDCP7030-2.0.2-1.i386.deb http://127.0.0.1:631/printers/DCP7030 : OK After that printer works - SCANNING : Install scan-key-tools / Brscan3 http://solutions.brother.com/linux/en_us/download_scn.html#brscan3 http://solutions.brother.com/linux/en_us/instruction_scn1a.html sudo gedit /lib/udev/rules.d/50-udev-default.rules : in section "libusb device nodes", replacer 0664 by 0666 sudo lsusb Bus 001 Device 004: ID 04f9:01a Brother Industries, Ltd Go to dev/bus/usb : bus 1 and device 4 is root owned Open it in Nautilus as root, change it to my user name and take ownership Now Simple Scan works, Brother-DCP is seen. But... big problem ! At each restart of Ubuntu or DCP Brother, permission resets and comes back to root, I have to change ownership and re-log each time, this is not nice... Is it a way to "protect" the file against erasing or permission change ? It's also true for other models than DCP-7030 (like DCP-7040...). I do not know if it is a Cups / Ubuntu "bug" or Openprinting missing for new drivers, but as Brother gives functional drivers for Linux, this should be easily implemented I hope, as more and more materials are natively identified in Ubuntu. Thanks in advance for your help. Best regards, Xavier To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/cups/+bug/701856/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1821904] Re: Gnome Shell always started muted on Disco
I assume this bug is about audio and you're not talking about something appearing muted...? :) I also can't see any obvious problems. Do you have any gnome-shell extensions installed? Or any other software starting automatically on login? -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to pulseaudio in Ubuntu. https://bugs.launchpad.net/bugs/1821904 Title: Gnome Shell always started muted on Disco Status in pulseaudio package in Ubuntu: Incomplete Bug description: On Disco, Gnome Shell always starts muted. --- ProblemType: Bug ApportVersion: 2.20.10-0ubuntu23 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: joe4766 F pulseaudio /dev/snd/pcmC0D0p: joe4766 F...m pulseaudio CurrentDesktop: ubuntu:GNOME DistroRelease: Ubuntu 19.04 InstallationDate: Installed on 2018-09-15 (193 days ago) InstallationMedia: Ubuntu 18.04.1 LTS "Bionic Beaver" - Release amd64 (20180725) NonfreeKernelModules: zfs zunicode zavl icp zcommon znvpair Package: pulseaudio 1:12.2-2ubuntu1 PackageArchitecture: amd64 ProcVersionSignature: Ubuntu 5.0.0-7.8-generic 5.0.0 Tags: disco wayland-session Uname: Linux 5.0.0-7-generic x86_64 UpgradeStatus: Upgraded to disco on 2019-03-20 (7 days ago) UserGroups: adm cdrom dip input kvm libvirt lpadmin lxd plugdev sambashare sudo _MarkForUpload: True dmi.bios.date: 02/14/2019 dmi.bios.vendor: Dell Inc. dmi.bios.version: 1.8.1 dmi.board.name: 0F6P3V dmi.board.vendor: Dell Inc. dmi.board.version: A00 dmi.chassis.type: 10 dmi.chassis.vendor: Dell Inc. dmi.modalias: dmi:bvnDellInc.:bvr1.8.1:bd02/14/2019:svnDellInc.:pnXPS139370:pvr:rvnDellInc.:rn0F6P3V:rvrA00:cvnDellInc.:ct10:cvr: dmi.product.family: XPS dmi.product.name: XPS 13 9370 dmi.product.sku: 07E6 dmi.sys.vendor: Dell Inc. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/pulseaudio/+bug/1821904/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1759014] Please test proposed package
Hello Alan, or anyone else affected, Accepted netplan.io into bionic-proposed. The package will build now and be available at https://launchpad.net/ubuntu/+source/netplan.io/0.96-0ubuntu0.18.04.2 in a few hours, and then in the -proposed repository. Please help us by testing this new package. See https://wiki.ubuntu.com/Testing/EnableProposed for documentation on how to enable and use -proposed. Your feedback will aid us getting this update out to other Ubuntu users. If this package fixes the bug for you, please add a comment to this bug, mentioning the version of the package you tested and change the tag from verification-needed-bionic to verification-done-bionic. If it does not fix the bug for you, please add a comment stating that, and change the tag to verification-failed-bionic. In either case, without details of your testing we will not be able to proceed. Further information regarding the verification process can be found at https://wiki.ubuntu.com/QATeam/PerformingSRUVerification . Thank you in advance for helping! N.B. The updated package will be released to -updates after the bug(s) fixed by this package have been verified and the package has been in -proposed for a minimum of 7 days. -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to systemd in Ubuntu. https://bugs.launchpad.net/bugs/1759014 Title: Netplan has no way to control DHCP client Status in netplan: Fix Released Status in netplan.io package in Ubuntu: Fix Released Status in systemd package in Ubuntu: Confirmed Status in netplan.io source package in Bionic: Fix Committed Status in systemd source package in Bionic: Confirmed Status in netplan.io source package in Cosmic: Fix Committed Status in systemd source package in Cosmic: Confirmed Status in netplan.io source package in Disco: Fix Released Status in systemd source package in Disco: Confirmed Bug description: [Impact] DHCP configurations where custom settings (routes, nameservers, etc.) need to be applied. [Test case] 1) Configure netplan for the particulars of the network by configuring an appropriate dhcp{4,6}-override stanza: network: version: 2 ethernets: engreen: dhcp4: true dhcp4-overrides: use-dns: false use-routes: false route-metric: Additionally, if so required, add a custom DNS / routes to the configuration. e.g. nameservers: search: [lab, kitchen] addresses: [8.8.8.8] (See https://netplan.io/reference#dhcp-overrides for the available options) 2) Run 'netplan apply' or reboot to have the configuration applied. 3) Validate that the routes / DNS are properly ignored and/or replaced by the defined values. [Regression potential] Minimal; this adds new values to the configuration generated for networkd or NetworkManager. Existing configurations will remain unchanged, but new configurations using the dhcp{4,6}-overrides fields will benefit from additional flexibility. --- Currently DHCP appears to be an all or nothing boolean, which is insufficient for many network configurations. Ideally all of the DHCP configuration options supported by systemd would also be supported in netplan: https://www.freedesktop.org/software/systemd/man/systemd.network.html#%5BDHCP%5D%20Section%20Options As an example, consider the following netplan configuration: network: version: 2 renderer: networkd ethernets: enp0s3: dhcp4: yes nameservers: [8.8.8.8,8.8.4.4] After running netplan apply I check the nameservers with systemd- resolve --status and it shows: DNS Servers: 8.8.8.8 8.8.4.4 192.168.1.1 Here, "192.168.1.1" was provided by my DHCP server. On this particular node, I only want the manually configured DNS servers, but netplan has no way to indicate this. To manage notifications about this bug go to: https://bugs.launchpad.net/netplan/+bug/1759014/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1770082] Re: systemd-networkd not renaming devices on boot
Hello Daniel, or anyone else affected, Accepted netplan.io into bionic-proposed. The package will build now and be available at https://launchpad.net/ubuntu/+source/netplan.io/0.96-0ubuntu0.18.04.2 in a few hours, and then in the -proposed repository. Please help us by testing this new package. See https://wiki.ubuntu.com/Testing/EnableProposed for documentation on how to enable and use -proposed. Your feedback will aid us getting this update out to other Ubuntu users. If this package fixes the bug for you, please add a comment to this bug, mentioning the version of the package you tested and change the tag from verification-needed-bionic to verification-done-bionic. If it does not fix the bug for you, please add a comment stating that, and change the tag to verification-failed-bionic. In either case, without details of your testing we will not be able to proceed. Further information regarding the verification process can be found at https://wiki.ubuntu.com/QATeam/PerformingSRUVerification . Thank you in advance for helping! N.B. The updated package will be released to -updates after the bug(s) fixed by this package have been verified and the package has been in -proposed for a minimum of 7 days. ** Changed in: netplan.io (Ubuntu Bionic) Status: Fix Released => Fix Committed ** Tags removed: verification-done-bionic ** Tags added: verification-needed-bionic -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to systemd in Ubuntu. https://bugs.launchpad.net/bugs/1770082 Title: systemd-networkd not renaming devices on boot Status in netplan: Fix Released Status in cloud-init package in Ubuntu: Confirmed Status in netplan.io package in Ubuntu: Fix Released Status in nplan package in Ubuntu: Fix Released Status in systemd package in Ubuntu: Confirmed Status in nplan source package in Xenial: Fix Released Status in netplan.io source package in Bionic: Fix Committed Status in netplan.io source package in Cosmic: Fix Committed Bug description: [Impact] Systems relying on renaming network interfaces at boot and when 'netplan apply' is run. [Test case] - Write a new netplan YAML (adjusting for current system as necessary): network: version: 2 ethernets: ens3: dhcp4: true match: macaddress: 52:54:00:de:bd:f6 set-name: myif0 - Bring down interface : 'ip link set dev ens3 down' - Run 'netplan apply' - Verify that the device is correctly renamed to 'myif0'. - Reboot. - Make sure the device is correctly renamed to 'myif0'. [Regression potential] Changes in rename logic to add udev rules may otherwise impact applying different settings to the network interfaces. Changes in settings on network interfaces, missing parameters (especially on bonds, bridges) should be investigated as potential regressions. Other failures to apply network settings might also happen if there's a race between applying renames via the udev rules, and using the new names to apply configuration changes to the interfaces. === systemd issue === Renaming devices doesn't seem to work. If I disable all other network configuration and create /etc/systemd/network/10-network.link with: [Match] MACAddress=52:54:00:c1:c9:bb [Link] Name=myiface3 I expect this to cause the device with that MAC address to be renamed to myiface3. However, when I reboot, I instead see: $ ip l 1: lo: mtu 65536 qdisc noqueue state UNKNOWN mode DEFAULT group default qlen 1000 link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00 2: ens3: mtu 1500 qdisc noop state DOWN mode DEFAULT group default qlen 1000 link/ether 52:54:00:c1:c9:bb brd ff:ff:ff:ff:ff:ff The device is not renamed. This link file is pretty much identical to Example 2 in https://www.freedesktop.org/software/systemd/man/systemd.link.html. The renaming does work if I boot with net.ifnames=0, and oddly, it also works if I unbind the device and rebind it as netplan apply does. No setting of NamePolicy seems to help. === Original Bug == 'set-name:' doesn't change the name of a network interface on boot, it only works when you do netplan apply. Say I take this 50-cloud-init.yaml file: # This file is generated from information provided by # the datasource. Changes to it will not persist across an instance. # To disable cloud-init's network configuration capabilities, write a file # /etc/cloud/cloud.cfg.d/99-disable-network-config.cfg with the following: # network: {config: disabled} network: version: 2 ethernets: ens3: dhcp4: true match: macaddress: 52:54:00:de:bd:f6 set-name: ens3 Say I change set-name to 'myiface3' and reboot. I expect that the device will be called myiface3 and brought up fine with dhcp. However, instead I see:
[Touch-packages] [Bug 1770082] Re: systemd-networkd not renaming devices on boot
Hello Daniel, or anyone else affected, Accepted netplan.io into cosmic-proposed. The package will build now and be available at https://launchpad.net/ubuntu/+source/netplan.io/0.96-0ubuntu0.18.10.2 in a few hours, and then in the -proposed repository. Please help us by testing this new package. See https://wiki.ubuntu.com/Testing/EnableProposed for documentation on how to enable and use -proposed. Your feedback will aid us getting this update out to other Ubuntu users. If this package fixes the bug for you, please add a comment to this bug, mentioning the version of the package you tested and change the tag from verification-needed-cosmic to verification-done-cosmic. If it does not fix the bug for you, please add a comment stating that, and change the tag to verification-failed-cosmic. In either case, without details of your testing we will not be able to proceed. Further information regarding the verification process can be found at https://wiki.ubuntu.com/QATeam/PerformingSRUVerification . Thank you in advance for helping! N.B. The updated package will be released to -updates after the bug(s) fixed by this package have been verified and the package has been in -proposed for a minimum of 7 days. ** Changed in: netplan.io (Ubuntu Cosmic) Status: Fix Released => Fix Committed ** Tags removed: verification-done verification-done-cosmic ** Tags added: verification-needed verification-needed-cosmic -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to systemd in Ubuntu. https://bugs.launchpad.net/bugs/1770082 Title: systemd-networkd not renaming devices on boot Status in netplan: Fix Released Status in cloud-init package in Ubuntu: Confirmed Status in netplan.io package in Ubuntu: Fix Released Status in nplan package in Ubuntu: Fix Released Status in systemd package in Ubuntu: Confirmed Status in nplan source package in Xenial: Fix Released Status in netplan.io source package in Bionic: Fix Released Status in netplan.io source package in Cosmic: Fix Committed Bug description: [Impact] Systems relying on renaming network interfaces at boot and when 'netplan apply' is run. [Test case] - Write a new netplan YAML (adjusting for current system as necessary): network: version: 2 ethernets: ens3: dhcp4: true match: macaddress: 52:54:00:de:bd:f6 set-name: myif0 - Bring down interface : 'ip link set dev ens3 down' - Run 'netplan apply' - Verify that the device is correctly renamed to 'myif0'. - Reboot. - Make sure the device is correctly renamed to 'myif0'. [Regression potential] Changes in rename logic to add udev rules may otherwise impact applying different settings to the network interfaces. Changes in settings on network interfaces, missing parameters (especially on bonds, bridges) should be investigated as potential regressions. Other failures to apply network settings might also happen if there's a race between applying renames via the udev rules, and using the new names to apply configuration changes to the interfaces. === systemd issue === Renaming devices doesn't seem to work. If I disable all other network configuration and create /etc/systemd/network/10-network.link with: [Match] MACAddress=52:54:00:c1:c9:bb [Link] Name=myiface3 I expect this to cause the device with that MAC address to be renamed to myiface3. However, when I reboot, I instead see: $ ip l 1: lo: mtu 65536 qdisc noqueue state UNKNOWN mode DEFAULT group default qlen 1000 link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00 2: ens3: mtu 1500 qdisc noop state DOWN mode DEFAULT group default qlen 1000 link/ether 52:54:00:c1:c9:bb brd ff:ff:ff:ff:ff:ff The device is not renamed. This link file is pretty much identical to Example 2 in https://www.freedesktop.org/software/systemd/man/systemd.link.html. The renaming does work if I boot with net.ifnames=0, and oddly, it also works if I unbind the device and rebind it as netplan apply does. No setting of NamePolicy seems to help. === Original Bug == 'set-name:' doesn't change the name of a network interface on boot, it only works when you do netplan apply. Say I take this 50-cloud-init.yaml file: # This file is generated from information provided by # the datasource. Changes to it will not persist across an instance. # To disable cloud-init's network configuration capabilities, write a file # /etc/cloud/cloud.cfg.d/99-disable-network-config.cfg with the following: # network: {config: disabled} network: version: 2 ethernets: ens3: dhcp4: true match: macaddress: 52:54:00:de:bd:f6 set-name: ens3 Say I change set-name to 'myiface3' and reboot. I expect that the device will be called myiface3 and brought up fine
[Touch-packages] [Bug 1759014] Please test proposed package
Hello Alan, or anyone else affected, Accepted netplan.io into cosmic-proposed. The package will build now and be available at https://launchpad.net/ubuntu/+source/netplan.io/0.96-0ubuntu0.18.10.2 in a few hours, and then in the -proposed repository. Please help us by testing this new package. See https://wiki.ubuntu.com/Testing/EnableProposed for documentation on how to enable and use -proposed. Your feedback will aid us getting this update out to other Ubuntu users. If this package fixes the bug for you, please add a comment to this bug, mentioning the version of the package you tested and change the tag from verification-needed-cosmic to verification-done-cosmic. If it does not fix the bug for you, please add a comment stating that, and change the tag to verification-failed-cosmic. In either case, without details of your testing we will not be able to proceed. Further information regarding the verification process can be found at https://wiki.ubuntu.com/QATeam/PerformingSRUVerification . Thank you in advance for helping! N.B. The updated package will be released to -updates after the bug(s) fixed by this package have been verified and the package has been in -proposed for a minimum of 7 days. -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to systemd in Ubuntu. https://bugs.launchpad.net/bugs/1759014 Title: Netplan has no way to control DHCP client Status in netplan: Fix Released Status in netplan.io package in Ubuntu: Fix Released Status in systemd package in Ubuntu: Confirmed Status in netplan.io source package in Bionic: Fix Committed Status in systemd source package in Bionic: Confirmed Status in netplan.io source package in Cosmic: Fix Committed Status in systemd source package in Cosmic: Confirmed Status in netplan.io source package in Disco: Fix Released Status in systemd source package in Disco: Confirmed Bug description: [Impact] DHCP configurations where custom settings (routes, nameservers, etc.) need to be applied. [Test case] 1) Configure netplan for the particulars of the network by configuring an appropriate dhcp{4,6}-override stanza: network: version: 2 ethernets: engreen: dhcp4: true dhcp4-overrides: use-dns: false use-routes: false route-metric: Additionally, if so required, add a custom DNS / routes to the configuration. e.g. nameservers: search: [lab, kitchen] addresses: [8.8.8.8] (See https://netplan.io/reference#dhcp-overrides for the available options) 2) Run 'netplan apply' or reboot to have the configuration applied. 3) Validate that the routes / DNS are properly ignored and/or replaced by the defined values. [Regression potential] Minimal; this adds new values to the configuration generated for networkd or NetworkManager. Existing configurations will remain unchanged, but new configurations using the dhcp{4,6}-overrides fields will benefit from additional flexibility. --- Currently DHCP appears to be an all or nothing boolean, which is insufficient for many network configurations. Ideally all of the DHCP configuration options supported by systemd would also be supported in netplan: https://www.freedesktop.org/software/systemd/man/systemd.network.html#%5BDHCP%5D%20Section%20Options As an example, consider the following netplan configuration: network: version: 2 renderer: networkd ethernets: enp0s3: dhcp4: yes nameservers: [8.8.8.8,8.8.4.4] After running netplan apply I check the nameservers with systemd- resolve --status and it shows: DNS Servers: 8.8.8.8 8.8.4.4 192.168.1.1 Here, "192.168.1.1" was provided by my DHCP server. On this particular node, I only want the manually configured DNS servers, but netplan has no way to indicate this. To manage notifications about this bug go to: https://bugs.launchpad.net/netplan/+bug/1759014/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1794629] Re: CVE-2018-15473 - User enumeration vulnerability
root: sudo apt update && sudo apt upgrade Thanks -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to openssh in Ubuntu. https://bugs.launchpad.net/bugs/1794629 Title: CVE-2018-15473 - User enumeration vulnerability Status in openssh package in Ubuntu: Fix Released Status in openssh source package in Trusty: Fix Released Status in openssh source package in Xenial: Fix Released Status in openssh source package in Bionic: Fix Released Status in openssh source package in Cosmic: Fix Released Bug description: https://nvd.nist.gov/vuln/detail/CVE-2018-15473 OpenSSH through 7.7 is prone to a user enumeration vulnerability due to not delaying bailout for an invalid authenticating user until after the packet containing the request has been fully parsed, related to auth2-gss.c, auth2-hostbased.c, and auth2-pubkey.c. Fixed in Debian: https://www.debian.org/security/2018/dsa-4280 Currently pending triage? https://people.canonical.com/~ubuntu- security/cve/2018/CVE-2018-15473.html To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/openssh/+bug/1794629/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1822092] Re: FFe: Mesa 19.0.1 for disco
This bug was fixed in the package mesa - 19.0.1-1ubuntu1 --- mesa (19.0.1-1ubuntu1) disco; urgency=medium * Merge from Debian. (LP: #1822092) -- Timo Aaltonen Thu, 28 Mar 2019 15:51:31 +0200 ** Changed in: mesa (Ubuntu) Status: New => Fix Released -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to mesa in Ubuntu. https://bugs.launchpad.net/bugs/1822092 Title: FFe: Mesa 19.0.1 for disco Status in mesa package in Ubuntu: Fix Released Bug description: Mesa 19.0.1 is a bug fix release which fixes bugs found since the 19.0.0 release. Mesa 19.0.1 implements the OpenGL 4.5 API, but the version reported by glGetString(GL_VERSION) or glGetIntegerv(GL_MAJOR_VERSION) / glGetIntegerv(GL_MINOR_VERSION) depends on the particular driver being used. Some drivers don't support all the features required in OpenGL 4.5. OpenGL 4.5 is only available if requested at context creation. Compatibility contexts may report a lower version depending on each driver. https://www.mesa3d.org/relnotes/19.0.1.html To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/mesa/+bug/1822092/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1777006] Re: package initramfs-tools 0.103ubuntu4.11 failed to install/upgrade: subprocess installed post-installation script returned error exit status 1
Status changed to 'Confirmed' because the bug affects multiple users. ** Changed in: initramfs-tools (Ubuntu) Status: New => Confirmed -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to initramfs-tools in Ubuntu. https://bugs.launchpad.net/bugs/1777006 Title: package initramfs-tools 0.103ubuntu4.11 failed to install/upgrade: subprocess installed post-installation script returned error exit status 1 Status in initramfs-tools package in Ubuntu: Confirmed Bug description: attempting a do-release-upgrade ProblemType: Package DistroRelease: Ubuntu 14.04 Package: initramfs-tools 0.103ubuntu4.11 ProcVersionSignature: Ubuntu 3.2.0-126.169-generic 3.2.79 Uname: Linux 3.2.0-126-generic x86_64 NonfreeKernelModules: fglrx ApportVersion: 2.14.1-0ubuntu3.29 Architecture: amd64 Date: Thu Jun 14 15:02:24 2018 DuplicateSignature: package:initramfs-tools:0.103ubuntu4.11:subprocess installed post-installation script returned error exit status 1 ErrorMessage: subprocess installed post-installation script returned error exit status 1 InstallationDate: Installed on 2013-01-23 (1968 days ago) InstallationMedia: Ubuntu 12.04 LTS "Precise Pangolin" - Release amd64 (20120425) PackageArchitecture: all RelatedPackageVersions: dpkg 1.17.5ubuntu5.8 apt 1.0.1ubuntu2.18 SourcePackage: initramfs-tools Title: package initramfs-tools 0.103ubuntu4.11 failed to install/upgrade: subprocess installed post-installation script returned error exit status 1 UpgradeStatus: Upgraded to trusty on 2018-06-14 (0 days ago) To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/initramfs-tools/+bug/1777006/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1472758] Re: /usr/share/apport/whoopsie-upload-all:AssertionError:/usr/share/apport/whoopsie-upload-all@161:collect_info:process_report:add_gdb_info:gdb_command
*** This bug is a duplicate of bug 1820132 *** https://bugs.launchpad.net/bugs/1820132 ** This bug has been marked a duplicate of bug 1820132 /usr/share/apport/whoopsie-upload-all:AssertionError:/usr/share/apport/whoopsie-upload-all@162:collect_info:process_report:add_gdb_info:gdb_command -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to apport in Ubuntu. https://bugs.launchpad.net/bugs/1472758 Title: /usr/share/apport/whoopsie-upload-all:AssertionError:/usr/share/apport /whoopsie-upload- all@161:collect_info:process_report:add_gdb_info:gdb_command Status in apport package in Ubuntu: New Bug description: The Ubuntu Error Tracker has been receiving reports about a problem regarding apport. This problem was most recently seen with version 2.17.3-0ubuntu4, the problem page at https://errors.ubuntu.com/problem/bd73cc178a8f334b3cd563f43ec2912dfbf814b5 contains more details. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/apport/+bug/1472758/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1822179] Re: Resuming from sleep breaks desktop and lock screen background in GNOME
** Tags added: disco ** Package changed: ubuntu => xorg (Ubuntu) -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to xorg in Ubuntu. https://bugs.launchpad.net/bugs/1822179 Title: Resuming from sleep breaks desktop and lock screen background in GNOME Status in xorg package in Ubuntu: New Bug description: CPU: AMD Ryzen 5 1600 MOBO: MSI B350M MORTAR GPU: NVIDIA GTX 1060 Ubuntu version: 19.04 Nvidia driver version: 418.56 The system is updated with the latest updates as today, 28 March 2019 As the title says, in Ubuntu 19.04 the GNOME lockscreen gets corrupted, and the GNOME desktop has blank background after resuming from standby/sleep To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/xorg/+bug/1822179/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1822179] [NEW] Resuming from sleep breaks desktop and lock screen background in GNOME
You have been subscribed to a public bug: CPU: AMD Ryzen 5 1600 MOBO: MSI B350M MORTAR GPU: NVIDIA GTX 1060 Ubuntu version: 19.04 Nvidia driver version: 418.56 The system is updated with the latest updates as today, 28 March 2019 As the title says, in Ubuntu 19.04 the GNOME lockscreen gets corrupted, and the GNOME desktop has blank background after resuming from standby/sleep ** Affects: xorg (Ubuntu) Importance: Undecided Status: New ** Tags: bot-comment disco -- Resuming from sleep breaks desktop and lock screen background in GNOME https://bugs.launchpad.net/bugs/1822179 You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to xorg in Ubuntu. -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1820929] Re: netplan should consider adding more udev attribute for exact matching of failover 3-netdev interfaces
Yes, that does explain it. /run/netplan/.yaml is written automatically by initramfs- tools when booting with a remote root (ie. iscsi); so this does check out: for example, 'critical' is required in that case, otherwise as soon as someone runs 'netplan apply' the network will go down and you might have filesystem errors. -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to systemd in Ubuntu. https://bugs.launchpad.net/bugs/1820929 Title: netplan should consider adding more udev attribute for exact matching of failover 3-netdev interfaces Status in netplan: Triaged Status in netplan.io package in Ubuntu: Triaged Status in systemd package in Ubuntu: Incomplete Bug description: This bug is a follow-up to https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1815268 after applying the 0001-net_failover-delay-taking-over-primary-device- to-acc.patch attached in that bug, the VF interface "eth0" is renamed to "rename4" instead of "ens4". Log is showing that attempt to rename "eth0" to "ens3" failed because of conflict with existing name, so that's why it ends up with rename4. vsbalakr@ubuntu-18:~$ uname -a Linux ubuntu-18 4.15.0-1009-oracle #11+lp1815268 SMP Tue Mar 12 15:20:15 UTC 2019 x86_64 x86_64 x86_64 GNU/Linux vsbalakr@ubuntu-18:~$ ip l 1: lo: mtu 65536 qdisc noqueue state UNKNOWN mode DEFAULT group default qlen 1000 link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00 2: ens3: mtu 1500 qdisc noqueue state UP mode DEFAULT group default qlen 1000 link/ether ba:fb:9f:12:2f:02 brd ff:ff:ff:ff:ff:ff 3: ens3nsby: mtu 1500 qdisc pfifo_fast master ens3 state UP mode DEFAULT group default qlen 1000 link/ether ba:fb:9f:12:2f:02 brd ff:ff:ff:ff:ff:ff 4: rename4: mtu 1500 qdisc mq master ens3 state UP mode DEFAULT group default qlen 1000 link/ether ba:fb:9f:12:2f:02 brd ff:ff:ff:ff:ff:ff vsbalakr@ubuntu-18:~$ egrep -i '(rename4|busy)' /var/log/syslog ... Mar 18 11:01:52 ubuntu-18 NetworkManager[1294]: [1552932112.9591] device (rename4): carrier: link connected Mar 18 11:01:52 ubuntu-18 NetworkManager[1294]: [1552932112.9591] device (rename4): enslaved to non-master-type device ens3; ignoring Mar 18 11:01:53 ubuntu-18 systemd-udevd[2463]: error changing net interface name 'eth0' to 'ens3': Device or resource busy Mar 18 11:01:53 ubuntu-18 systemd-udevd[2463]: could not rename interface '4' from 'eth0' to 'ens3': Device or resource busy Within VM there's netplan config as below: vsbalakr@ubuntu-18:~$ cat /etc/netplan/01-netcfg.yaml # This file describes the network interfaces available on your system # For more information, see netplan(5). network: version: 2 renderer: networkd ethernets: ens3: dhcp4: yes gateway4: 10.211.8.1 nameservers: addresses: [10.211.11.1,10.209.76.197] By running udevadm test, we can see the conflicting ens3 name comes from netplan's /run/udev/rules.d/99-netplan-ens3.rules vsbalakr@ubuntu-18:~$ cat /run/udev/rules.d/99-netplan-ens3.rules SUBSYSTEM=="net", ACTION=="add", DRIVERS=="?*", ATTR{address}=="ba:fb:9f:12:2f:02", NAME="ens3" vsbalakr@ubuntu-18:/lib/udev/rules.d$ udevadm test --action="add" /sys/class/net/eth0 calling: test version 237 This program is for debugging only, it does not run any program specified by a RUN key. It may show incorrect results, because some values may be different, or not available at a simulation run. Load module index Parsed configuration file /lib/systemd/network/99-default.link Parsed configuration file /run/systemd/network/10-netplan-ens3.link Created link configuration context. Reading rules file: /lib/udev/rules.d/01-md-raid-creating.rules .. Reading rules file: /lib/udev/rules.d/99-vmware-scsi-udev.rules rules contain 393216 bytes tokens (32768 * 12 bytes), 38638 bytes strings 25317 strings (216160 bytes), 21957 de-duplicated (180883 bytes), 3361 trie nodes used RUN '/lib/open-iscsi/net-interface-handler start' /lib/udev/rules.d/70-iscsi-network-interface.rules:2 IMPORT builtin 'net_id' /lib/udev/rules.d/75-net-description.rules:6 IMPORT builtin 'hwdb' /lib/udev/rules.d/75-net-description.rules:12 RUN 'ifupdown-hotplug' /lib/udev/rules.d/80-ifupdown.rules:5 IMPORT builtin 'path_id' /lib/udev/rules.d/80-net-setup-link.rules:5 IMPORT builtin 'net_setup_link' /lib/udev/rules.d/80-net-setup-link.rules:9 Config file /lib/systemd/network/99-default.link applies to device eth0 link_config: autonegotiation is unset or enabled, the speed and duplex are not writable. link_config: could not set ethtool features for eth0 Could not set offload features of eth0: Operation not permitted NAME 'ens4' /lib/udev/rules.d/80-net-setup-link.rules:11 NAME 'ens3' /run/udev/rules.d/99-netplan-ens3.rules:1 RUN '/lib/systemd/systemd-sysctl --prefix=/net/ipv4/conf/$name
[Touch-packages] [Bug 1821936] Re: ALC274 unsupported
I did this yesterday per request and marked it as confirmed. I just completed this for a second time agreeing to send some data which mentioned pulse-audio, etc., to you all. It completed at 16:39 local time, Miami. -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to alsa-driver in Ubuntu. https://bugs.launchpad.net/bugs/1821936 Title: ALC274 unsupported Status in alsa-driver package in Ubuntu: Incomplete Status in linux package in Ubuntu: Incomplete Bug description: I find this to be an issue with current LTS 18.04's latest 4.19 kernel. I tested this on mainline 4.20 and 5.0 kernels as well. No audio because ALC274 not properly loaded for use, so no audio output. A related card had a similar bug, which was fixed, and may be of use in resolving this one: https://bugs.launchpad.net/ubuntu/+source/alsa-driver/+bug/1784485 # cat /proc/asound/card0/codec* | grep Codec Codec: Realtek ALC274 Codec: Intel Kabylake HDMI # cat /proc/asound/card0/pcm0c/info card: 0 device: 0 subdevice: 0 stream: CAPTURE id: ALC274 Analog name: ALC274 Analog subname: subdevice #0 class: 0 subclass: 0 subdevices_count: 1 subdevices_avail: 0 aplay -l List of PLAYBACK Hardware Devices card 0: PCH [HDA Intel PCH], device 0: ALC274 Analog [ALC274 Analog] Subdevices: 1/1 Subdevice #0: subdevice #0 card 0: PCH [HDA Intel PCH], device 3: HDMI 0 [HDMI 0] Subdevices: 1/1 Subdevice #0: subdevice #0 card 0: PCH [HDA Intel PCH], device 7: HDMI 1 [HDMI 1] Subdevices: 1/1 Subdevice #0: subdevice #0 card 0: PCH [HDA Intel PCH], device 8: HDMI 2 [HDMI 2] Subdevices: 1/1 Subdevice #0: subdevice #0 card 0: PCH [HDA Intel PCH], device 9: HDMI 3 [HDMI 3] Subdevices: 1/1 Subdevice #0: subdevice #0 card 0: PCH [HDA Intel PCH], device 10: HDMI 4 [HDMI 4] Subdevices: 1/1 Subdevice #0: subdevice #0 d# hwinfo --sound 21: PCI 1f.3: 0403 Audio device [Created at pci.378] Unique ID: nS1_.WnojYJLVCm0 SysFS ID: /devices/pci:00/:00:1f.3 SysFS BusID: :00:1f.3 Hardware Class: sound Model: "Intel Audio device" Vendor: pci 0x8086 "Intel Corporation" Device: pci 0xa348 SubVendor: pci 0x1043 "ASUSTeK Computer Inc." SubDevice: pci 0x31d0 Revision: 0x10 Driver: "snd_hda_intel" Driver Modules: "snd_hda_intel" Memory Range: 0xdd398000-0xdd39bfff (rw,non-prefetchable) Memory Range: 0xdd10-0xdd1f (rw,non-prefetchable) IRQ: 145 (663 events) Module Alias: "pci:v8086dA348sv1043sd31D0bc04sc03i80" Driver Info #0: Driver Status: snd_hda_intel is active Driver Activation Cmd: "modprobe snd_hda_intel" Config Status: cfg=new, avail=yes, need=no, active=unknown --- ProblemType: Bug ApportVersion: 2.20.9-0ubuntu7.6 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: gdm1903 F pulseaudio derek 2464 F pulseaudio DistroRelease: Ubuntu 18.04 InstallationDate: Installed on 2019-03-23 (5 days ago) InstallationMedia: Ubuntu 18.04.2 LTS "Bionic Beaver" - Release amd64 (20190210) MachineType: ASUSTeK COMPUTER INC. Zen AIO 27 Z272SD_Z272SD NonfreeKernelModules: nvidia_modeset nvidia Package: linux (not installed) ProcEnviron: TERM=xterm-256color PATH=(custom, no user) XDG_RUNTIME_DIR= LANG=en_US.UTF-8 SHELL=/bin/bash ProcFB: 0 inteldrmfb ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-4.18.0-16-generic root=UUID=a3d569a1-6262-4609-b2f5-199dbabf57cb ro quiet splash ProcVersionSignature: Ubuntu 4.18.0-16.17~18.04.1-generic 4.18.20 PulseList: Error: command ['pacmd', 'list'] failed with exit code 1: No PulseAudio daemon running, or not running as session daemon. RelatedPackageVersions: linux-restricted-modules-4.18.0-16-generic N/A linux-backports-modules-4.18.0-16-generic N/A linux-firmware 1.173.3 Tags: bionic Uname: Linux 4.18.0-16-generic x86_64 UpgradeStatus: No upgrade log present (probably fresh install) UserGroups: _MarkForUpload: True dmi.bios.date: 09/26/2018 dmi.bios.vendor: American Megatrends Inc. dmi.bios.version: Z272SD.300 dmi.board.asset.tag: ATN12345678901234567 dmi.board.name: Z272SD dmi.board.vendor: ASUSTeK COMPUTER INC. dmi.board.version: 1.0 dmi.chassis.asset.tag: No Asset Tag dmi.chassis.type: 13 dmi.chassis.vendor: ASUSTeK COMPUTER INC. dmi.chassis.version: 1.0 dmi.modalias: dmi:bvnAmericanMegatrendsInc.:bvrZ272SD.300:bd09/26/2018:svnASUSTeKCOMPUTERINC.:pnZenAIO27Z272SD_Z272SD:pvr1.0:rvnASUSTeKCOMPUTERINC.:rnZ272SD:rvr1.0:cvnASUSTeKCOMPUTERINC.:ct13:cvr1.0: dmi.product.family: Zen AIO dmi.product.name: Zen AIO 27 Z272SD_Z272SD dmi.product.version: 1.0 dmi.sys.vendor: ASUSTeK COMPUTER INC. To
[Touch-packages] [Bug 1821936] IwConfig.txt
apport information ** Attachment added: "IwConfig.txt" https://bugs.launchpad.net/bugs/1821936/+attachment/5250288/+files/IwConfig.txt -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to alsa-driver in Ubuntu. https://bugs.launchpad.net/bugs/1821936 Title: ALC274 unsupported Status in alsa-driver package in Ubuntu: Incomplete Status in linux package in Ubuntu: Incomplete Bug description: I find this to be an issue with current LTS 18.04's latest 4.19 kernel. I tested this on mainline 4.20 and 5.0 kernels as well. No audio because ALC274 not properly loaded for use, so no audio output. A related card had a similar bug, which was fixed, and may be of use in resolving this one: https://bugs.launchpad.net/ubuntu/+source/alsa-driver/+bug/1784485 # cat /proc/asound/card0/codec* | grep Codec Codec: Realtek ALC274 Codec: Intel Kabylake HDMI # cat /proc/asound/card0/pcm0c/info card: 0 device: 0 subdevice: 0 stream: CAPTURE id: ALC274 Analog name: ALC274 Analog subname: subdevice #0 class: 0 subclass: 0 subdevices_count: 1 subdevices_avail: 0 aplay -l List of PLAYBACK Hardware Devices card 0: PCH [HDA Intel PCH], device 0: ALC274 Analog [ALC274 Analog] Subdevices: 1/1 Subdevice #0: subdevice #0 card 0: PCH [HDA Intel PCH], device 3: HDMI 0 [HDMI 0] Subdevices: 1/1 Subdevice #0: subdevice #0 card 0: PCH [HDA Intel PCH], device 7: HDMI 1 [HDMI 1] Subdevices: 1/1 Subdevice #0: subdevice #0 card 0: PCH [HDA Intel PCH], device 8: HDMI 2 [HDMI 2] Subdevices: 1/1 Subdevice #0: subdevice #0 card 0: PCH [HDA Intel PCH], device 9: HDMI 3 [HDMI 3] Subdevices: 1/1 Subdevice #0: subdevice #0 card 0: PCH [HDA Intel PCH], device 10: HDMI 4 [HDMI 4] Subdevices: 1/1 Subdevice #0: subdevice #0 d# hwinfo --sound 21: PCI 1f.3: 0403 Audio device [Created at pci.378] Unique ID: nS1_.WnojYJLVCm0 SysFS ID: /devices/pci:00/:00:1f.3 SysFS BusID: :00:1f.3 Hardware Class: sound Model: "Intel Audio device" Vendor: pci 0x8086 "Intel Corporation" Device: pci 0xa348 SubVendor: pci 0x1043 "ASUSTeK Computer Inc." SubDevice: pci 0x31d0 Revision: 0x10 Driver: "snd_hda_intel" Driver Modules: "snd_hda_intel" Memory Range: 0xdd398000-0xdd39bfff (rw,non-prefetchable) Memory Range: 0xdd10-0xdd1f (rw,non-prefetchable) IRQ: 145 (663 events) Module Alias: "pci:v8086dA348sv1043sd31D0bc04sc03i80" Driver Info #0: Driver Status: snd_hda_intel is active Driver Activation Cmd: "modprobe snd_hda_intel" Config Status: cfg=new, avail=yes, need=no, active=unknown --- ProblemType: Bug ApportVersion: 2.20.9-0ubuntu7.6 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: gdm1903 F pulseaudio derek 2464 F pulseaudio DistroRelease: Ubuntu 18.04 InstallationDate: Installed on 2019-03-23 (5 days ago) InstallationMedia: Ubuntu 18.04.2 LTS "Bionic Beaver" - Release amd64 (20190210) MachineType: ASUSTeK COMPUTER INC. Zen AIO 27 Z272SD_Z272SD NonfreeKernelModules: nvidia_modeset nvidia Package: linux (not installed) ProcEnviron: TERM=xterm-256color PATH=(custom, no user) XDG_RUNTIME_DIR= LANG=en_US.UTF-8 SHELL=/bin/bash ProcFB: 0 inteldrmfb ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-4.18.0-16-generic root=UUID=a3d569a1-6262-4609-b2f5-199dbabf57cb ro quiet splash ProcVersionSignature: Ubuntu 4.18.0-16.17~18.04.1-generic 4.18.20 PulseList: Error: command ['pacmd', 'list'] failed with exit code 1: No PulseAudio daemon running, or not running as session daemon. RelatedPackageVersions: linux-restricted-modules-4.18.0-16-generic N/A linux-backports-modules-4.18.0-16-generic N/A linux-firmware 1.173.3 Tags: bionic Uname: Linux 4.18.0-16-generic x86_64 UpgradeStatus: No upgrade log present (probably fresh install) UserGroups: _MarkForUpload: True dmi.bios.date: 09/26/2018 dmi.bios.vendor: American Megatrends Inc. dmi.bios.version: Z272SD.300 dmi.board.asset.tag: ATN12345678901234567 dmi.board.name: Z272SD dmi.board.vendor: ASUSTeK COMPUTER INC. dmi.board.version: 1.0 dmi.chassis.asset.tag: No Asset Tag dmi.chassis.type: 13 dmi.chassis.vendor: ASUSTeK COMPUTER INC. dmi.chassis.version: 1.0 dmi.modalias: dmi:bvnAmericanMegatrendsInc.:bvrZ272SD.300:bd09/26/2018:svnASUSTeKCOMPUTERINC.:pnZenAIO27Z272SD_Z272SD:pvr1.0:rvnASUSTeKCOMPUTERINC.:rnZ272SD:rvr1.0:cvnASUSTeKCOMPUTERINC.:ct13:cvr1.0: dmi.product.family: Zen AIO dmi.product.name: Zen AIO 27 Z272SD_Z272SD dmi.product.version: 1.0 dmi.sys.vendor: ASUSTeK COMPUTER INC. To manage notifications about this bug go to:
[Touch-packages] [Bug 1821936] Lspci.txt
apport information ** Attachment added: "Lspci.txt" https://bugs.launchpad.net/bugs/1821936/+attachment/5250289/+files/Lspci.txt -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to alsa-driver in Ubuntu. https://bugs.launchpad.net/bugs/1821936 Title: ALC274 unsupported Status in alsa-driver package in Ubuntu: Incomplete Status in linux package in Ubuntu: Incomplete Bug description: I find this to be an issue with current LTS 18.04's latest 4.19 kernel. I tested this on mainline 4.20 and 5.0 kernels as well. No audio because ALC274 not properly loaded for use, so no audio output. A related card had a similar bug, which was fixed, and may be of use in resolving this one: https://bugs.launchpad.net/ubuntu/+source/alsa-driver/+bug/1784485 # cat /proc/asound/card0/codec* | grep Codec Codec: Realtek ALC274 Codec: Intel Kabylake HDMI # cat /proc/asound/card0/pcm0c/info card: 0 device: 0 subdevice: 0 stream: CAPTURE id: ALC274 Analog name: ALC274 Analog subname: subdevice #0 class: 0 subclass: 0 subdevices_count: 1 subdevices_avail: 0 aplay -l List of PLAYBACK Hardware Devices card 0: PCH [HDA Intel PCH], device 0: ALC274 Analog [ALC274 Analog] Subdevices: 1/1 Subdevice #0: subdevice #0 card 0: PCH [HDA Intel PCH], device 3: HDMI 0 [HDMI 0] Subdevices: 1/1 Subdevice #0: subdevice #0 card 0: PCH [HDA Intel PCH], device 7: HDMI 1 [HDMI 1] Subdevices: 1/1 Subdevice #0: subdevice #0 card 0: PCH [HDA Intel PCH], device 8: HDMI 2 [HDMI 2] Subdevices: 1/1 Subdevice #0: subdevice #0 card 0: PCH [HDA Intel PCH], device 9: HDMI 3 [HDMI 3] Subdevices: 1/1 Subdevice #0: subdevice #0 card 0: PCH [HDA Intel PCH], device 10: HDMI 4 [HDMI 4] Subdevices: 1/1 Subdevice #0: subdevice #0 d# hwinfo --sound 21: PCI 1f.3: 0403 Audio device [Created at pci.378] Unique ID: nS1_.WnojYJLVCm0 SysFS ID: /devices/pci:00/:00:1f.3 SysFS BusID: :00:1f.3 Hardware Class: sound Model: "Intel Audio device" Vendor: pci 0x8086 "Intel Corporation" Device: pci 0xa348 SubVendor: pci 0x1043 "ASUSTeK Computer Inc." SubDevice: pci 0x31d0 Revision: 0x10 Driver: "snd_hda_intel" Driver Modules: "snd_hda_intel" Memory Range: 0xdd398000-0xdd39bfff (rw,non-prefetchable) Memory Range: 0xdd10-0xdd1f (rw,non-prefetchable) IRQ: 145 (663 events) Module Alias: "pci:v8086dA348sv1043sd31D0bc04sc03i80" Driver Info #0: Driver Status: snd_hda_intel is active Driver Activation Cmd: "modprobe snd_hda_intel" Config Status: cfg=new, avail=yes, need=no, active=unknown --- ProblemType: Bug ApportVersion: 2.20.9-0ubuntu7.6 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: gdm1903 F pulseaudio derek 2464 F pulseaudio DistroRelease: Ubuntu 18.04 InstallationDate: Installed on 2019-03-23 (5 days ago) InstallationMedia: Ubuntu 18.04.2 LTS "Bionic Beaver" - Release amd64 (20190210) MachineType: ASUSTeK COMPUTER INC. Zen AIO 27 Z272SD_Z272SD NonfreeKernelModules: nvidia_modeset nvidia Package: linux (not installed) ProcEnviron: TERM=xterm-256color PATH=(custom, no user) XDG_RUNTIME_DIR= LANG=en_US.UTF-8 SHELL=/bin/bash ProcFB: 0 inteldrmfb ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-4.18.0-16-generic root=UUID=a3d569a1-6262-4609-b2f5-199dbabf57cb ro quiet splash ProcVersionSignature: Ubuntu 4.18.0-16.17~18.04.1-generic 4.18.20 PulseList: Error: command ['pacmd', 'list'] failed with exit code 1: No PulseAudio daemon running, or not running as session daemon. RelatedPackageVersions: linux-restricted-modules-4.18.0-16-generic N/A linux-backports-modules-4.18.0-16-generic N/A linux-firmware 1.173.3 Tags: bionic Uname: Linux 4.18.0-16-generic x86_64 UpgradeStatus: No upgrade log present (probably fresh install) UserGroups: _MarkForUpload: True dmi.bios.date: 09/26/2018 dmi.bios.vendor: American Megatrends Inc. dmi.bios.version: Z272SD.300 dmi.board.asset.tag: ATN12345678901234567 dmi.board.name: Z272SD dmi.board.vendor: ASUSTeK COMPUTER INC. dmi.board.version: 1.0 dmi.chassis.asset.tag: No Asset Tag dmi.chassis.type: 13 dmi.chassis.vendor: ASUSTeK COMPUTER INC. dmi.chassis.version: 1.0 dmi.modalias: dmi:bvnAmericanMegatrendsInc.:bvrZ272SD.300:bd09/26/2018:svnASUSTeKCOMPUTERINC.:pnZenAIO27Z272SD_Z272SD:pvr1.0:rvnASUSTeKCOMPUTERINC.:rnZ272SD:rvr1.0:cvnASUSTeKCOMPUTERINC.:ct13:cvr1.0: dmi.product.family: Zen AIO dmi.product.name: Zen AIO 27 Z272SD_Z272SD dmi.product.version: 1.0 dmi.sys.vendor: ASUSTeK COMPUTER INC. To manage notifications about this bug go to:
[Touch-packages] [Bug 1821936] WifiSyslog.txt
apport information ** Attachment added: "WifiSyslog.txt" https://bugs.launchpad.net/bugs/1821936/+attachment/5250297/+files/WifiSyslog.txt -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to alsa-driver in Ubuntu. https://bugs.launchpad.net/bugs/1821936 Title: ALC274 unsupported Status in alsa-driver package in Ubuntu: Incomplete Status in linux package in Ubuntu: Incomplete Bug description: I find this to be an issue with current LTS 18.04's latest 4.19 kernel. I tested this on mainline 4.20 and 5.0 kernels as well. No audio because ALC274 not properly loaded for use, so no audio output. A related card had a similar bug, which was fixed, and may be of use in resolving this one: https://bugs.launchpad.net/ubuntu/+source/alsa-driver/+bug/1784485 # cat /proc/asound/card0/codec* | grep Codec Codec: Realtek ALC274 Codec: Intel Kabylake HDMI # cat /proc/asound/card0/pcm0c/info card: 0 device: 0 subdevice: 0 stream: CAPTURE id: ALC274 Analog name: ALC274 Analog subname: subdevice #0 class: 0 subclass: 0 subdevices_count: 1 subdevices_avail: 0 aplay -l List of PLAYBACK Hardware Devices card 0: PCH [HDA Intel PCH], device 0: ALC274 Analog [ALC274 Analog] Subdevices: 1/1 Subdevice #0: subdevice #0 card 0: PCH [HDA Intel PCH], device 3: HDMI 0 [HDMI 0] Subdevices: 1/1 Subdevice #0: subdevice #0 card 0: PCH [HDA Intel PCH], device 7: HDMI 1 [HDMI 1] Subdevices: 1/1 Subdevice #0: subdevice #0 card 0: PCH [HDA Intel PCH], device 8: HDMI 2 [HDMI 2] Subdevices: 1/1 Subdevice #0: subdevice #0 card 0: PCH [HDA Intel PCH], device 9: HDMI 3 [HDMI 3] Subdevices: 1/1 Subdevice #0: subdevice #0 card 0: PCH [HDA Intel PCH], device 10: HDMI 4 [HDMI 4] Subdevices: 1/1 Subdevice #0: subdevice #0 d# hwinfo --sound 21: PCI 1f.3: 0403 Audio device [Created at pci.378] Unique ID: nS1_.WnojYJLVCm0 SysFS ID: /devices/pci:00/:00:1f.3 SysFS BusID: :00:1f.3 Hardware Class: sound Model: "Intel Audio device" Vendor: pci 0x8086 "Intel Corporation" Device: pci 0xa348 SubVendor: pci 0x1043 "ASUSTeK Computer Inc." SubDevice: pci 0x31d0 Revision: 0x10 Driver: "snd_hda_intel" Driver Modules: "snd_hda_intel" Memory Range: 0xdd398000-0xdd39bfff (rw,non-prefetchable) Memory Range: 0xdd10-0xdd1f (rw,non-prefetchable) IRQ: 145 (663 events) Module Alias: "pci:v8086dA348sv1043sd31D0bc04sc03i80" Driver Info #0: Driver Status: snd_hda_intel is active Driver Activation Cmd: "modprobe snd_hda_intel" Config Status: cfg=new, avail=yes, need=no, active=unknown --- ProblemType: Bug ApportVersion: 2.20.9-0ubuntu7.6 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: gdm1903 F pulseaudio derek 2464 F pulseaudio DistroRelease: Ubuntu 18.04 InstallationDate: Installed on 2019-03-23 (5 days ago) InstallationMedia: Ubuntu 18.04.2 LTS "Bionic Beaver" - Release amd64 (20190210) MachineType: ASUSTeK COMPUTER INC. Zen AIO 27 Z272SD_Z272SD NonfreeKernelModules: nvidia_modeset nvidia Package: linux (not installed) ProcEnviron: TERM=xterm-256color PATH=(custom, no user) XDG_RUNTIME_DIR= LANG=en_US.UTF-8 SHELL=/bin/bash ProcFB: 0 inteldrmfb ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-4.18.0-16-generic root=UUID=a3d569a1-6262-4609-b2f5-199dbabf57cb ro quiet splash ProcVersionSignature: Ubuntu 4.18.0-16.17~18.04.1-generic 4.18.20 PulseList: Error: command ['pacmd', 'list'] failed with exit code 1: No PulseAudio daemon running, or not running as session daemon. RelatedPackageVersions: linux-restricted-modules-4.18.0-16-generic N/A linux-backports-modules-4.18.0-16-generic N/A linux-firmware 1.173.3 Tags: bionic Uname: Linux 4.18.0-16-generic x86_64 UpgradeStatus: No upgrade log present (probably fresh install) UserGroups: _MarkForUpload: True dmi.bios.date: 09/26/2018 dmi.bios.vendor: American Megatrends Inc. dmi.bios.version: Z272SD.300 dmi.board.asset.tag: ATN12345678901234567 dmi.board.name: Z272SD dmi.board.vendor: ASUSTeK COMPUTER INC. dmi.board.version: 1.0 dmi.chassis.asset.tag: No Asset Tag dmi.chassis.type: 13 dmi.chassis.vendor: ASUSTeK COMPUTER INC. dmi.chassis.version: 1.0 dmi.modalias: dmi:bvnAmericanMegatrendsInc.:bvrZ272SD.300:bd09/26/2018:svnASUSTeKCOMPUTERINC.:pnZenAIO27Z272SD_Z272SD:pvr1.0:rvnASUSTeKCOMPUTERINC.:rnZ272SD:rvr1.0:cvnASUSTeKCOMPUTERINC.:ct13:cvr1.0: dmi.product.family: Zen AIO dmi.product.name: Zen AIO 27 Z272SD_Z272SD dmi.product.version: 1.0 dmi.sys.vendor: ASUSTeK COMPUTER INC. To manage notifications about this bug go to:
[Touch-packages] [Bug 1821936] UdevDb.txt
apport information ** Attachment added: "UdevDb.txt" https://bugs.launchpad.net/bugs/1821936/+attachment/5250296/+files/UdevDb.txt -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to alsa-driver in Ubuntu. https://bugs.launchpad.net/bugs/1821936 Title: ALC274 unsupported Status in alsa-driver package in Ubuntu: Incomplete Status in linux package in Ubuntu: Incomplete Bug description: I find this to be an issue with current LTS 18.04's latest 4.19 kernel. I tested this on mainline 4.20 and 5.0 kernels as well. No audio because ALC274 not properly loaded for use, so no audio output. A related card had a similar bug, which was fixed, and may be of use in resolving this one: https://bugs.launchpad.net/ubuntu/+source/alsa-driver/+bug/1784485 # cat /proc/asound/card0/codec* | grep Codec Codec: Realtek ALC274 Codec: Intel Kabylake HDMI # cat /proc/asound/card0/pcm0c/info card: 0 device: 0 subdevice: 0 stream: CAPTURE id: ALC274 Analog name: ALC274 Analog subname: subdevice #0 class: 0 subclass: 0 subdevices_count: 1 subdevices_avail: 0 aplay -l List of PLAYBACK Hardware Devices card 0: PCH [HDA Intel PCH], device 0: ALC274 Analog [ALC274 Analog] Subdevices: 1/1 Subdevice #0: subdevice #0 card 0: PCH [HDA Intel PCH], device 3: HDMI 0 [HDMI 0] Subdevices: 1/1 Subdevice #0: subdevice #0 card 0: PCH [HDA Intel PCH], device 7: HDMI 1 [HDMI 1] Subdevices: 1/1 Subdevice #0: subdevice #0 card 0: PCH [HDA Intel PCH], device 8: HDMI 2 [HDMI 2] Subdevices: 1/1 Subdevice #0: subdevice #0 card 0: PCH [HDA Intel PCH], device 9: HDMI 3 [HDMI 3] Subdevices: 1/1 Subdevice #0: subdevice #0 card 0: PCH [HDA Intel PCH], device 10: HDMI 4 [HDMI 4] Subdevices: 1/1 Subdevice #0: subdevice #0 d# hwinfo --sound 21: PCI 1f.3: 0403 Audio device [Created at pci.378] Unique ID: nS1_.WnojYJLVCm0 SysFS ID: /devices/pci:00/:00:1f.3 SysFS BusID: :00:1f.3 Hardware Class: sound Model: "Intel Audio device" Vendor: pci 0x8086 "Intel Corporation" Device: pci 0xa348 SubVendor: pci 0x1043 "ASUSTeK Computer Inc." SubDevice: pci 0x31d0 Revision: 0x10 Driver: "snd_hda_intel" Driver Modules: "snd_hda_intel" Memory Range: 0xdd398000-0xdd39bfff (rw,non-prefetchable) Memory Range: 0xdd10-0xdd1f (rw,non-prefetchable) IRQ: 145 (663 events) Module Alias: "pci:v8086dA348sv1043sd31D0bc04sc03i80" Driver Info #0: Driver Status: snd_hda_intel is active Driver Activation Cmd: "modprobe snd_hda_intel" Config Status: cfg=new, avail=yes, need=no, active=unknown --- ProblemType: Bug ApportVersion: 2.20.9-0ubuntu7.6 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: gdm1903 F pulseaudio derek 2464 F pulseaudio DistroRelease: Ubuntu 18.04 InstallationDate: Installed on 2019-03-23 (5 days ago) InstallationMedia: Ubuntu 18.04.2 LTS "Bionic Beaver" - Release amd64 (20190210) MachineType: ASUSTeK COMPUTER INC. Zen AIO 27 Z272SD_Z272SD NonfreeKernelModules: nvidia_modeset nvidia Package: linux (not installed) ProcEnviron: TERM=xterm-256color PATH=(custom, no user) XDG_RUNTIME_DIR= LANG=en_US.UTF-8 SHELL=/bin/bash ProcFB: 0 inteldrmfb ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-4.18.0-16-generic root=UUID=a3d569a1-6262-4609-b2f5-199dbabf57cb ro quiet splash ProcVersionSignature: Ubuntu 4.18.0-16.17~18.04.1-generic 4.18.20 PulseList: Error: command ['pacmd', 'list'] failed with exit code 1: No PulseAudio daemon running, or not running as session daemon. RelatedPackageVersions: linux-restricted-modules-4.18.0-16-generic N/A linux-backports-modules-4.18.0-16-generic N/A linux-firmware 1.173.3 Tags: bionic Uname: Linux 4.18.0-16-generic x86_64 UpgradeStatus: No upgrade log present (probably fresh install) UserGroups: _MarkForUpload: True dmi.bios.date: 09/26/2018 dmi.bios.vendor: American Megatrends Inc. dmi.bios.version: Z272SD.300 dmi.board.asset.tag: ATN12345678901234567 dmi.board.name: Z272SD dmi.board.vendor: ASUSTeK COMPUTER INC. dmi.board.version: 1.0 dmi.chassis.asset.tag: No Asset Tag dmi.chassis.type: 13 dmi.chassis.vendor: ASUSTeK COMPUTER INC. dmi.chassis.version: 1.0 dmi.modalias: dmi:bvnAmericanMegatrendsInc.:bvrZ272SD.300:bd09/26/2018:svnASUSTeKCOMPUTERINC.:pnZenAIO27Z272SD_Z272SD:pvr1.0:rvnASUSTeKCOMPUTERINC.:rnZ272SD:rvr1.0:cvnASUSTeKCOMPUTERINC.:ct13:cvr1.0: dmi.product.family: Zen AIO dmi.product.name: Zen AIO 27 Z272SD_Z272SD dmi.product.version: 1.0 dmi.sys.vendor: ASUSTeK COMPUTER INC. To manage notifications about this bug go to:
[Touch-packages] [Bug 1821936] RfKill.txt
apport information ** Attachment added: "RfKill.txt" https://bugs.launchpad.net/bugs/1821936/+attachment/5250295/+files/RfKill.txt -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to alsa-driver in Ubuntu. https://bugs.launchpad.net/bugs/1821936 Title: ALC274 unsupported Status in alsa-driver package in Ubuntu: Incomplete Status in linux package in Ubuntu: Incomplete Bug description: I find this to be an issue with current LTS 18.04's latest 4.19 kernel. I tested this on mainline 4.20 and 5.0 kernels as well. No audio because ALC274 not properly loaded for use, so no audio output. A related card had a similar bug, which was fixed, and may be of use in resolving this one: https://bugs.launchpad.net/ubuntu/+source/alsa-driver/+bug/1784485 # cat /proc/asound/card0/codec* | grep Codec Codec: Realtek ALC274 Codec: Intel Kabylake HDMI # cat /proc/asound/card0/pcm0c/info card: 0 device: 0 subdevice: 0 stream: CAPTURE id: ALC274 Analog name: ALC274 Analog subname: subdevice #0 class: 0 subclass: 0 subdevices_count: 1 subdevices_avail: 0 aplay -l List of PLAYBACK Hardware Devices card 0: PCH [HDA Intel PCH], device 0: ALC274 Analog [ALC274 Analog] Subdevices: 1/1 Subdevice #0: subdevice #0 card 0: PCH [HDA Intel PCH], device 3: HDMI 0 [HDMI 0] Subdevices: 1/1 Subdevice #0: subdevice #0 card 0: PCH [HDA Intel PCH], device 7: HDMI 1 [HDMI 1] Subdevices: 1/1 Subdevice #0: subdevice #0 card 0: PCH [HDA Intel PCH], device 8: HDMI 2 [HDMI 2] Subdevices: 1/1 Subdevice #0: subdevice #0 card 0: PCH [HDA Intel PCH], device 9: HDMI 3 [HDMI 3] Subdevices: 1/1 Subdevice #0: subdevice #0 card 0: PCH [HDA Intel PCH], device 10: HDMI 4 [HDMI 4] Subdevices: 1/1 Subdevice #0: subdevice #0 d# hwinfo --sound 21: PCI 1f.3: 0403 Audio device [Created at pci.378] Unique ID: nS1_.WnojYJLVCm0 SysFS ID: /devices/pci:00/:00:1f.3 SysFS BusID: :00:1f.3 Hardware Class: sound Model: "Intel Audio device" Vendor: pci 0x8086 "Intel Corporation" Device: pci 0xa348 SubVendor: pci 0x1043 "ASUSTeK Computer Inc." SubDevice: pci 0x31d0 Revision: 0x10 Driver: "snd_hda_intel" Driver Modules: "snd_hda_intel" Memory Range: 0xdd398000-0xdd39bfff (rw,non-prefetchable) Memory Range: 0xdd10-0xdd1f (rw,non-prefetchable) IRQ: 145 (663 events) Module Alias: "pci:v8086dA348sv1043sd31D0bc04sc03i80" Driver Info #0: Driver Status: snd_hda_intel is active Driver Activation Cmd: "modprobe snd_hda_intel" Config Status: cfg=new, avail=yes, need=no, active=unknown --- ProblemType: Bug ApportVersion: 2.20.9-0ubuntu7.6 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: gdm1903 F pulseaudio derek 2464 F pulseaudio DistroRelease: Ubuntu 18.04 InstallationDate: Installed on 2019-03-23 (5 days ago) InstallationMedia: Ubuntu 18.04.2 LTS "Bionic Beaver" - Release amd64 (20190210) MachineType: ASUSTeK COMPUTER INC. Zen AIO 27 Z272SD_Z272SD NonfreeKernelModules: nvidia_modeset nvidia Package: linux (not installed) ProcEnviron: TERM=xterm-256color PATH=(custom, no user) XDG_RUNTIME_DIR= LANG=en_US.UTF-8 SHELL=/bin/bash ProcFB: 0 inteldrmfb ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-4.18.0-16-generic root=UUID=a3d569a1-6262-4609-b2f5-199dbabf57cb ro quiet splash ProcVersionSignature: Ubuntu 4.18.0-16.17~18.04.1-generic 4.18.20 PulseList: Error: command ['pacmd', 'list'] failed with exit code 1: No PulseAudio daemon running, or not running as session daemon. RelatedPackageVersions: linux-restricted-modules-4.18.0-16-generic N/A linux-backports-modules-4.18.0-16-generic N/A linux-firmware 1.173.3 Tags: bionic Uname: Linux 4.18.0-16-generic x86_64 UpgradeStatus: No upgrade log present (probably fresh install) UserGroups: _MarkForUpload: True dmi.bios.date: 09/26/2018 dmi.bios.vendor: American Megatrends Inc. dmi.bios.version: Z272SD.300 dmi.board.asset.tag: ATN12345678901234567 dmi.board.name: Z272SD dmi.board.vendor: ASUSTeK COMPUTER INC. dmi.board.version: 1.0 dmi.chassis.asset.tag: No Asset Tag dmi.chassis.type: 13 dmi.chassis.vendor: ASUSTeK COMPUTER INC. dmi.chassis.version: 1.0 dmi.modalias: dmi:bvnAmericanMegatrendsInc.:bvrZ272SD.300:bd09/26/2018:svnASUSTeKCOMPUTERINC.:pnZenAIO27Z272SD_Z272SD:pvr1.0:rvnASUSTeKCOMPUTERINC.:rnZ272SD:rvr1.0:cvnASUSTeKCOMPUTERINC.:ct13:cvr1.0: dmi.product.family: Zen AIO dmi.product.name: Zen AIO 27 Z272SD_Z272SD dmi.product.version: 1.0 dmi.sys.vendor: ASUSTeK COMPUTER INC. To manage notifications about this bug go to:
[Touch-packages] [Bug 1821936] ProcCpuinfoMinimal.txt
apport information ** Attachment added: "ProcCpuinfoMinimal.txt" https://bugs.launchpad.net/bugs/1821936/+attachment/5250292/+files/ProcCpuinfoMinimal.txt -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to alsa-driver in Ubuntu. https://bugs.launchpad.net/bugs/1821936 Title: ALC274 unsupported Status in alsa-driver package in Ubuntu: Incomplete Status in linux package in Ubuntu: Incomplete Bug description: I find this to be an issue with current LTS 18.04's latest 4.19 kernel. I tested this on mainline 4.20 and 5.0 kernels as well. No audio because ALC274 not properly loaded for use, so no audio output. A related card had a similar bug, which was fixed, and may be of use in resolving this one: https://bugs.launchpad.net/ubuntu/+source/alsa-driver/+bug/1784485 # cat /proc/asound/card0/codec* | grep Codec Codec: Realtek ALC274 Codec: Intel Kabylake HDMI # cat /proc/asound/card0/pcm0c/info card: 0 device: 0 subdevice: 0 stream: CAPTURE id: ALC274 Analog name: ALC274 Analog subname: subdevice #0 class: 0 subclass: 0 subdevices_count: 1 subdevices_avail: 0 aplay -l List of PLAYBACK Hardware Devices card 0: PCH [HDA Intel PCH], device 0: ALC274 Analog [ALC274 Analog] Subdevices: 1/1 Subdevice #0: subdevice #0 card 0: PCH [HDA Intel PCH], device 3: HDMI 0 [HDMI 0] Subdevices: 1/1 Subdevice #0: subdevice #0 card 0: PCH [HDA Intel PCH], device 7: HDMI 1 [HDMI 1] Subdevices: 1/1 Subdevice #0: subdevice #0 card 0: PCH [HDA Intel PCH], device 8: HDMI 2 [HDMI 2] Subdevices: 1/1 Subdevice #0: subdevice #0 card 0: PCH [HDA Intel PCH], device 9: HDMI 3 [HDMI 3] Subdevices: 1/1 Subdevice #0: subdevice #0 card 0: PCH [HDA Intel PCH], device 10: HDMI 4 [HDMI 4] Subdevices: 1/1 Subdevice #0: subdevice #0 d# hwinfo --sound 21: PCI 1f.3: 0403 Audio device [Created at pci.378] Unique ID: nS1_.WnojYJLVCm0 SysFS ID: /devices/pci:00/:00:1f.3 SysFS BusID: :00:1f.3 Hardware Class: sound Model: "Intel Audio device" Vendor: pci 0x8086 "Intel Corporation" Device: pci 0xa348 SubVendor: pci 0x1043 "ASUSTeK Computer Inc." SubDevice: pci 0x31d0 Revision: 0x10 Driver: "snd_hda_intel" Driver Modules: "snd_hda_intel" Memory Range: 0xdd398000-0xdd39bfff (rw,non-prefetchable) Memory Range: 0xdd10-0xdd1f (rw,non-prefetchable) IRQ: 145 (663 events) Module Alias: "pci:v8086dA348sv1043sd31D0bc04sc03i80" Driver Info #0: Driver Status: snd_hda_intel is active Driver Activation Cmd: "modprobe snd_hda_intel" Config Status: cfg=new, avail=yes, need=no, active=unknown --- ProblemType: Bug ApportVersion: 2.20.9-0ubuntu7.6 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: gdm1903 F pulseaudio derek 2464 F pulseaudio DistroRelease: Ubuntu 18.04 InstallationDate: Installed on 2019-03-23 (5 days ago) InstallationMedia: Ubuntu 18.04.2 LTS "Bionic Beaver" - Release amd64 (20190210) MachineType: ASUSTeK COMPUTER INC. Zen AIO 27 Z272SD_Z272SD NonfreeKernelModules: nvidia_modeset nvidia Package: linux (not installed) ProcEnviron: TERM=xterm-256color PATH=(custom, no user) XDG_RUNTIME_DIR= LANG=en_US.UTF-8 SHELL=/bin/bash ProcFB: 0 inteldrmfb ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-4.18.0-16-generic root=UUID=a3d569a1-6262-4609-b2f5-199dbabf57cb ro quiet splash ProcVersionSignature: Ubuntu 4.18.0-16.17~18.04.1-generic 4.18.20 PulseList: Error: command ['pacmd', 'list'] failed with exit code 1: No PulseAudio daemon running, or not running as session daemon. RelatedPackageVersions: linux-restricted-modules-4.18.0-16-generic N/A linux-backports-modules-4.18.0-16-generic N/A linux-firmware 1.173.3 Tags: bionic Uname: Linux 4.18.0-16-generic x86_64 UpgradeStatus: No upgrade log present (probably fresh install) UserGroups: _MarkForUpload: True dmi.bios.date: 09/26/2018 dmi.bios.vendor: American Megatrends Inc. dmi.bios.version: Z272SD.300 dmi.board.asset.tag: ATN12345678901234567 dmi.board.name: Z272SD dmi.board.vendor: ASUSTeK COMPUTER INC. dmi.board.version: 1.0 dmi.chassis.asset.tag: No Asset Tag dmi.chassis.type: 13 dmi.chassis.vendor: ASUSTeK COMPUTER INC. dmi.chassis.version: 1.0 dmi.modalias: dmi:bvnAmericanMegatrendsInc.:bvrZ272SD.300:bd09/26/2018:svnASUSTeKCOMPUTERINC.:pnZenAIO27Z272SD_Z272SD:pvr1.0:rvnASUSTeKCOMPUTERINC.:rnZ272SD:rvr1.0:cvnASUSTeKCOMPUTERINC.:ct13:cvr1.0: dmi.product.family: Zen AIO dmi.product.name: Zen AIO 27 Z272SD_Z272SD dmi.product.version: 1.0 dmi.sys.vendor: ASUSTeK COMPUTER INC. To manage notifications about this bug go to:
[Touch-packages] [Bug 1821936] ProcInterrupts.txt
apport information ** Attachment added: "ProcInterrupts.txt" https://bugs.launchpad.net/bugs/1821936/+attachment/5250293/+files/ProcInterrupts.txt -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to alsa-driver in Ubuntu. https://bugs.launchpad.net/bugs/1821936 Title: ALC274 unsupported Status in alsa-driver package in Ubuntu: Incomplete Status in linux package in Ubuntu: Incomplete Bug description: I find this to be an issue with current LTS 18.04's latest 4.19 kernel. I tested this on mainline 4.20 and 5.0 kernels as well. No audio because ALC274 not properly loaded for use, so no audio output. A related card had a similar bug, which was fixed, and may be of use in resolving this one: https://bugs.launchpad.net/ubuntu/+source/alsa-driver/+bug/1784485 # cat /proc/asound/card0/codec* | grep Codec Codec: Realtek ALC274 Codec: Intel Kabylake HDMI # cat /proc/asound/card0/pcm0c/info card: 0 device: 0 subdevice: 0 stream: CAPTURE id: ALC274 Analog name: ALC274 Analog subname: subdevice #0 class: 0 subclass: 0 subdevices_count: 1 subdevices_avail: 0 aplay -l List of PLAYBACK Hardware Devices card 0: PCH [HDA Intel PCH], device 0: ALC274 Analog [ALC274 Analog] Subdevices: 1/1 Subdevice #0: subdevice #0 card 0: PCH [HDA Intel PCH], device 3: HDMI 0 [HDMI 0] Subdevices: 1/1 Subdevice #0: subdevice #0 card 0: PCH [HDA Intel PCH], device 7: HDMI 1 [HDMI 1] Subdevices: 1/1 Subdevice #0: subdevice #0 card 0: PCH [HDA Intel PCH], device 8: HDMI 2 [HDMI 2] Subdevices: 1/1 Subdevice #0: subdevice #0 card 0: PCH [HDA Intel PCH], device 9: HDMI 3 [HDMI 3] Subdevices: 1/1 Subdevice #0: subdevice #0 card 0: PCH [HDA Intel PCH], device 10: HDMI 4 [HDMI 4] Subdevices: 1/1 Subdevice #0: subdevice #0 d# hwinfo --sound 21: PCI 1f.3: 0403 Audio device [Created at pci.378] Unique ID: nS1_.WnojYJLVCm0 SysFS ID: /devices/pci:00/:00:1f.3 SysFS BusID: :00:1f.3 Hardware Class: sound Model: "Intel Audio device" Vendor: pci 0x8086 "Intel Corporation" Device: pci 0xa348 SubVendor: pci 0x1043 "ASUSTeK Computer Inc." SubDevice: pci 0x31d0 Revision: 0x10 Driver: "snd_hda_intel" Driver Modules: "snd_hda_intel" Memory Range: 0xdd398000-0xdd39bfff (rw,non-prefetchable) Memory Range: 0xdd10-0xdd1f (rw,non-prefetchable) IRQ: 145 (663 events) Module Alias: "pci:v8086dA348sv1043sd31D0bc04sc03i80" Driver Info #0: Driver Status: snd_hda_intel is active Driver Activation Cmd: "modprobe snd_hda_intel" Config Status: cfg=new, avail=yes, need=no, active=unknown --- ProblemType: Bug ApportVersion: 2.20.9-0ubuntu7.6 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: gdm1903 F pulseaudio derek 2464 F pulseaudio DistroRelease: Ubuntu 18.04 InstallationDate: Installed on 2019-03-23 (5 days ago) InstallationMedia: Ubuntu 18.04.2 LTS "Bionic Beaver" - Release amd64 (20190210) MachineType: ASUSTeK COMPUTER INC. Zen AIO 27 Z272SD_Z272SD NonfreeKernelModules: nvidia_modeset nvidia Package: linux (not installed) ProcEnviron: TERM=xterm-256color PATH=(custom, no user) XDG_RUNTIME_DIR= LANG=en_US.UTF-8 SHELL=/bin/bash ProcFB: 0 inteldrmfb ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-4.18.0-16-generic root=UUID=a3d569a1-6262-4609-b2f5-199dbabf57cb ro quiet splash ProcVersionSignature: Ubuntu 4.18.0-16.17~18.04.1-generic 4.18.20 PulseList: Error: command ['pacmd', 'list'] failed with exit code 1: No PulseAudio daemon running, or not running as session daemon. RelatedPackageVersions: linux-restricted-modules-4.18.0-16-generic N/A linux-backports-modules-4.18.0-16-generic N/A linux-firmware 1.173.3 Tags: bionic Uname: Linux 4.18.0-16-generic x86_64 UpgradeStatus: No upgrade log present (probably fresh install) UserGroups: _MarkForUpload: True dmi.bios.date: 09/26/2018 dmi.bios.vendor: American Megatrends Inc. dmi.bios.version: Z272SD.300 dmi.board.asset.tag: ATN12345678901234567 dmi.board.name: Z272SD dmi.board.vendor: ASUSTeK COMPUTER INC. dmi.board.version: 1.0 dmi.chassis.asset.tag: No Asset Tag dmi.chassis.type: 13 dmi.chassis.vendor: ASUSTeK COMPUTER INC. dmi.chassis.version: 1.0 dmi.modalias: dmi:bvnAmericanMegatrendsInc.:bvrZ272SD.300:bd09/26/2018:svnASUSTeKCOMPUTERINC.:pnZenAIO27Z272SD_Z272SD:pvr1.0:rvnASUSTeKCOMPUTERINC.:rnZ272SD:rvr1.0:cvnASUSTeKCOMPUTERINC.:ct13:cvr1.0: dmi.product.family: Zen AIO dmi.product.name: Zen AIO 27 Z272SD_Z272SD dmi.product.version: 1.0 dmi.sys.vendor: ASUSTeK COMPUTER INC. To manage notifications about this bug go to:
[Touch-packages] [Bug 1821936] ProcModules.txt
apport information ** Attachment added: "ProcModules.txt" https://bugs.launchpad.net/bugs/1821936/+attachment/5250294/+files/ProcModules.txt -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to alsa-driver in Ubuntu. https://bugs.launchpad.net/bugs/1821936 Title: ALC274 unsupported Status in alsa-driver package in Ubuntu: Incomplete Status in linux package in Ubuntu: Incomplete Bug description: I find this to be an issue with current LTS 18.04's latest 4.19 kernel. I tested this on mainline 4.20 and 5.0 kernels as well. No audio because ALC274 not properly loaded for use, so no audio output. A related card had a similar bug, which was fixed, and may be of use in resolving this one: https://bugs.launchpad.net/ubuntu/+source/alsa-driver/+bug/1784485 # cat /proc/asound/card0/codec* | grep Codec Codec: Realtek ALC274 Codec: Intel Kabylake HDMI # cat /proc/asound/card0/pcm0c/info card: 0 device: 0 subdevice: 0 stream: CAPTURE id: ALC274 Analog name: ALC274 Analog subname: subdevice #0 class: 0 subclass: 0 subdevices_count: 1 subdevices_avail: 0 aplay -l List of PLAYBACK Hardware Devices card 0: PCH [HDA Intel PCH], device 0: ALC274 Analog [ALC274 Analog] Subdevices: 1/1 Subdevice #0: subdevice #0 card 0: PCH [HDA Intel PCH], device 3: HDMI 0 [HDMI 0] Subdevices: 1/1 Subdevice #0: subdevice #0 card 0: PCH [HDA Intel PCH], device 7: HDMI 1 [HDMI 1] Subdevices: 1/1 Subdevice #0: subdevice #0 card 0: PCH [HDA Intel PCH], device 8: HDMI 2 [HDMI 2] Subdevices: 1/1 Subdevice #0: subdevice #0 card 0: PCH [HDA Intel PCH], device 9: HDMI 3 [HDMI 3] Subdevices: 1/1 Subdevice #0: subdevice #0 card 0: PCH [HDA Intel PCH], device 10: HDMI 4 [HDMI 4] Subdevices: 1/1 Subdevice #0: subdevice #0 d# hwinfo --sound 21: PCI 1f.3: 0403 Audio device [Created at pci.378] Unique ID: nS1_.WnojYJLVCm0 SysFS ID: /devices/pci:00/:00:1f.3 SysFS BusID: :00:1f.3 Hardware Class: sound Model: "Intel Audio device" Vendor: pci 0x8086 "Intel Corporation" Device: pci 0xa348 SubVendor: pci 0x1043 "ASUSTeK Computer Inc." SubDevice: pci 0x31d0 Revision: 0x10 Driver: "snd_hda_intel" Driver Modules: "snd_hda_intel" Memory Range: 0xdd398000-0xdd39bfff (rw,non-prefetchable) Memory Range: 0xdd10-0xdd1f (rw,non-prefetchable) IRQ: 145 (663 events) Module Alias: "pci:v8086dA348sv1043sd31D0bc04sc03i80" Driver Info #0: Driver Status: snd_hda_intel is active Driver Activation Cmd: "modprobe snd_hda_intel" Config Status: cfg=new, avail=yes, need=no, active=unknown --- ProblemType: Bug ApportVersion: 2.20.9-0ubuntu7.6 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: gdm1903 F pulseaudio derek 2464 F pulseaudio DistroRelease: Ubuntu 18.04 InstallationDate: Installed on 2019-03-23 (5 days ago) InstallationMedia: Ubuntu 18.04.2 LTS "Bionic Beaver" - Release amd64 (20190210) MachineType: ASUSTeK COMPUTER INC. Zen AIO 27 Z272SD_Z272SD NonfreeKernelModules: nvidia_modeset nvidia Package: linux (not installed) ProcEnviron: TERM=xterm-256color PATH=(custom, no user) XDG_RUNTIME_DIR= LANG=en_US.UTF-8 SHELL=/bin/bash ProcFB: 0 inteldrmfb ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-4.18.0-16-generic root=UUID=a3d569a1-6262-4609-b2f5-199dbabf57cb ro quiet splash ProcVersionSignature: Ubuntu 4.18.0-16.17~18.04.1-generic 4.18.20 PulseList: Error: command ['pacmd', 'list'] failed with exit code 1: No PulseAudio daemon running, or not running as session daemon. RelatedPackageVersions: linux-restricted-modules-4.18.0-16-generic N/A linux-backports-modules-4.18.0-16-generic N/A linux-firmware 1.173.3 Tags: bionic Uname: Linux 4.18.0-16-generic x86_64 UpgradeStatus: No upgrade log present (probably fresh install) UserGroups: _MarkForUpload: True dmi.bios.date: 09/26/2018 dmi.bios.vendor: American Megatrends Inc. dmi.bios.version: Z272SD.300 dmi.board.asset.tag: ATN12345678901234567 dmi.board.name: Z272SD dmi.board.vendor: ASUSTeK COMPUTER INC. dmi.board.version: 1.0 dmi.chassis.asset.tag: No Asset Tag dmi.chassis.type: 13 dmi.chassis.vendor: ASUSTeK COMPUTER INC. dmi.chassis.version: 1.0 dmi.modalias: dmi:bvnAmericanMegatrendsInc.:bvrZ272SD.300:bd09/26/2018:svnASUSTeKCOMPUTERINC.:pnZenAIO27Z272SD_Z272SD:pvr1.0:rvnASUSTeKCOMPUTERINC.:rnZ272SD:rvr1.0:cvnASUSTeKCOMPUTERINC.:ct13:cvr1.0: dmi.product.family: Zen AIO dmi.product.name: Zen AIO 27 Z272SD_Z272SD dmi.product.version: 1.0 dmi.sys.vendor: ASUSTeK COMPUTER INC. To manage notifications about this bug go to:
[Touch-packages] [Bug 1821936] ProcCpuinfo.txt
apport information ** Attachment added: "ProcCpuinfo.txt" https://bugs.launchpad.net/bugs/1821936/+attachment/5250291/+files/ProcCpuinfo.txt -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to alsa-driver in Ubuntu. https://bugs.launchpad.net/bugs/1821936 Title: ALC274 unsupported Status in alsa-driver package in Ubuntu: Incomplete Status in linux package in Ubuntu: Incomplete Bug description: I find this to be an issue with current LTS 18.04's latest 4.19 kernel. I tested this on mainline 4.20 and 5.0 kernels as well. No audio because ALC274 not properly loaded for use, so no audio output. A related card had a similar bug, which was fixed, and may be of use in resolving this one: https://bugs.launchpad.net/ubuntu/+source/alsa-driver/+bug/1784485 # cat /proc/asound/card0/codec* | grep Codec Codec: Realtek ALC274 Codec: Intel Kabylake HDMI # cat /proc/asound/card0/pcm0c/info card: 0 device: 0 subdevice: 0 stream: CAPTURE id: ALC274 Analog name: ALC274 Analog subname: subdevice #0 class: 0 subclass: 0 subdevices_count: 1 subdevices_avail: 0 aplay -l List of PLAYBACK Hardware Devices card 0: PCH [HDA Intel PCH], device 0: ALC274 Analog [ALC274 Analog] Subdevices: 1/1 Subdevice #0: subdevice #0 card 0: PCH [HDA Intel PCH], device 3: HDMI 0 [HDMI 0] Subdevices: 1/1 Subdevice #0: subdevice #0 card 0: PCH [HDA Intel PCH], device 7: HDMI 1 [HDMI 1] Subdevices: 1/1 Subdevice #0: subdevice #0 card 0: PCH [HDA Intel PCH], device 8: HDMI 2 [HDMI 2] Subdevices: 1/1 Subdevice #0: subdevice #0 card 0: PCH [HDA Intel PCH], device 9: HDMI 3 [HDMI 3] Subdevices: 1/1 Subdevice #0: subdevice #0 card 0: PCH [HDA Intel PCH], device 10: HDMI 4 [HDMI 4] Subdevices: 1/1 Subdevice #0: subdevice #0 d# hwinfo --sound 21: PCI 1f.3: 0403 Audio device [Created at pci.378] Unique ID: nS1_.WnojYJLVCm0 SysFS ID: /devices/pci:00/:00:1f.3 SysFS BusID: :00:1f.3 Hardware Class: sound Model: "Intel Audio device" Vendor: pci 0x8086 "Intel Corporation" Device: pci 0xa348 SubVendor: pci 0x1043 "ASUSTeK Computer Inc." SubDevice: pci 0x31d0 Revision: 0x10 Driver: "snd_hda_intel" Driver Modules: "snd_hda_intel" Memory Range: 0xdd398000-0xdd39bfff (rw,non-prefetchable) Memory Range: 0xdd10-0xdd1f (rw,non-prefetchable) IRQ: 145 (663 events) Module Alias: "pci:v8086dA348sv1043sd31D0bc04sc03i80" Driver Info #0: Driver Status: snd_hda_intel is active Driver Activation Cmd: "modprobe snd_hda_intel" Config Status: cfg=new, avail=yes, need=no, active=unknown --- ProblemType: Bug ApportVersion: 2.20.9-0ubuntu7.6 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: gdm1903 F pulseaudio derek 2464 F pulseaudio DistroRelease: Ubuntu 18.04 InstallationDate: Installed on 2019-03-23 (5 days ago) InstallationMedia: Ubuntu 18.04.2 LTS "Bionic Beaver" - Release amd64 (20190210) MachineType: ASUSTeK COMPUTER INC. Zen AIO 27 Z272SD_Z272SD NonfreeKernelModules: nvidia_modeset nvidia Package: linux (not installed) ProcEnviron: TERM=xterm-256color PATH=(custom, no user) XDG_RUNTIME_DIR= LANG=en_US.UTF-8 SHELL=/bin/bash ProcFB: 0 inteldrmfb ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-4.18.0-16-generic root=UUID=a3d569a1-6262-4609-b2f5-199dbabf57cb ro quiet splash ProcVersionSignature: Ubuntu 4.18.0-16.17~18.04.1-generic 4.18.20 PulseList: Error: command ['pacmd', 'list'] failed with exit code 1: No PulseAudio daemon running, or not running as session daemon. RelatedPackageVersions: linux-restricted-modules-4.18.0-16-generic N/A linux-backports-modules-4.18.0-16-generic N/A linux-firmware 1.173.3 Tags: bionic Uname: Linux 4.18.0-16-generic x86_64 UpgradeStatus: No upgrade log present (probably fresh install) UserGroups: _MarkForUpload: True dmi.bios.date: 09/26/2018 dmi.bios.vendor: American Megatrends Inc. dmi.bios.version: Z272SD.300 dmi.board.asset.tag: ATN12345678901234567 dmi.board.name: Z272SD dmi.board.vendor: ASUSTeK COMPUTER INC. dmi.board.version: 1.0 dmi.chassis.asset.tag: No Asset Tag dmi.chassis.type: 13 dmi.chassis.vendor: ASUSTeK COMPUTER INC. dmi.chassis.version: 1.0 dmi.modalias: dmi:bvnAmericanMegatrendsInc.:bvrZ272SD.300:bd09/26/2018:svnASUSTeKCOMPUTERINC.:pnZenAIO27Z272SD_Z272SD:pvr1.0:rvnASUSTeKCOMPUTERINC.:rnZ272SD:rvr1.0:cvnASUSTeKCOMPUTERINC.:ct13:cvr1.0: dmi.product.family: Zen AIO dmi.product.name: Zen AIO 27 Z272SD_Z272SD dmi.product.version: 1.0 dmi.sys.vendor: ASUSTeK COMPUTER INC. To manage notifications about this bug go to:
[Touch-packages] [Bug 1821936] Lsusb.txt
apport information ** Attachment added: "Lsusb.txt" https://bugs.launchpad.net/bugs/1821936/+attachment/5250290/+files/Lsusb.txt -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to alsa-driver in Ubuntu. https://bugs.launchpad.net/bugs/1821936 Title: ALC274 unsupported Status in alsa-driver package in Ubuntu: Incomplete Status in linux package in Ubuntu: Incomplete Bug description: I find this to be an issue with current LTS 18.04's latest 4.19 kernel. I tested this on mainline 4.20 and 5.0 kernels as well. No audio because ALC274 not properly loaded for use, so no audio output. A related card had a similar bug, which was fixed, and may be of use in resolving this one: https://bugs.launchpad.net/ubuntu/+source/alsa-driver/+bug/1784485 # cat /proc/asound/card0/codec* | grep Codec Codec: Realtek ALC274 Codec: Intel Kabylake HDMI # cat /proc/asound/card0/pcm0c/info card: 0 device: 0 subdevice: 0 stream: CAPTURE id: ALC274 Analog name: ALC274 Analog subname: subdevice #0 class: 0 subclass: 0 subdevices_count: 1 subdevices_avail: 0 aplay -l List of PLAYBACK Hardware Devices card 0: PCH [HDA Intel PCH], device 0: ALC274 Analog [ALC274 Analog] Subdevices: 1/1 Subdevice #0: subdevice #0 card 0: PCH [HDA Intel PCH], device 3: HDMI 0 [HDMI 0] Subdevices: 1/1 Subdevice #0: subdevice #0 card 0: PCH [HDA Intel PCH], device 7: HDMI 1 [HDMI 1] Subdevices: 1/1 Subdevice #0: subdevice #0 card 0: PCH [HDA Intel PCH], device 8: HDMI 2 [HDMI 2] Subdevices: 1/1 Subdevice #0: subdevice #0 card 0: PCH [HDA Intel PCH], device 9: HDMI 3 [HDMI 3] Subdevices: 1/1 Subdevice #0: subdevice #0 card 0: PCH [HDA Intel PCH], device 10: HDMI 4 [HDMI 4] Subdevices: 1/1 Subdevice #0: subdevice #0 d# hwinfo --sound 21: PCI 1f.3: 0403 Audio device [Created at pci.378] Unique ID: nS1_.WnojYJLVCm0 SysFS ID: /devices/pci:00/:00:1f.3 SysFS BusID: :00:1f.3 Hardware Class: sound Model: "Intel Audio device" Vendor: pci 0x8086 "Intel Corporation" Device: pci 0xa348 SubVendor: pci 0x1043 "ASUSTeK Computer Inc." SubDevice: pci 0x31d0 Revision: 0x10 Driver: "snd_hda_intel" Driver Modules: "snd_hda_intel" Memory Range: 0xdd398000-0xdd39bfff (rw,non-prefetchable) Memory Range: 0xdd10-0xdd1f (rw,non-prefetchable) IRQ: 145 (663 events) Module Alias: "pci:v8086dA348sv1043sd31D0bc04sc03i80" Driver Info #0: Driver Status: snd_hda_intel is active Driver Activation Cmd: "modprobe snd_hda_intel" Config Status: cfg=new, avail=yes, need=no, active=unknown --- ProblemType: Bug ApportVersion: 2.20.9-0ubuntu7.6 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: gdm1903 F pulseaudio derek 2464 F pulseaudio DistroRelease: Ubuntu 18.04 InstallationDate: Installed on 2019-03-23 (5 days ago) InstallationMedia: Ubuntu 18.04.2 LTS "Bionic Beaver" - Release amd64 (20190210) MachineType: ASUSTeK COMPUTER INC. Zen AIO 27 Z272SD_Z272SD NonfreeKernelModules: nvidia_modeset nvidia Package: linux (not installed) ProcEnviron: TERM=xterm-256color PATH=(custom, no user) XDG_RUNTIME_DIR= LANG=en_US.UTF-8 SHELL=/bin/bash ProcFB: 0 inteldrmfb ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-4.18.0-16-generic root=UUID=a3d569a1-6262-4609-b2f5-199dbabf57cb ro quiet splash ProcVersionSignature: Ubuntu 4.18.0-16.17~18.04.1-generic 4.18.20 PulseList: Error: command ['pacmd', 'list'] failed with exit code 1: No PulseAudio daemon running, or not running as session daemon. RelatedPackageVersions: linux-restricted-modules-4.18.0-16-generic N/A linux-backports-modules-4.18.0-16-generic N/A linux-firmware 1.173.3 Tags: bionic Uname: Linux 4.18.0-16-generic x86_64 UpgradeStatus: No upgrade log present (probably fresh install) UserGroups: _MarkForUpload: True dmi.bios.date: 09/26/2018 dmi.bios.vendor: American Megatrends Inc. dmi.bios.version: Z272SD.300 dmi.board.asset.tag: ATN12345678901234567 dmi.board.name: Z272SD dmi.board.vendor: ASUSTeK COMPUTER INC. dmi.board.version: 1.0 dmi.chassis.asset.tag: No Asset Tag dmi.chassis.type: 13 dmi.chassis.vendor: ASUSTeK COMPUTER INC. dmi.chassis.version: 1.0 dmi.modalias: dmi:bvnAmericanMegatrendsInc.:bvrZ272SD.300:bd09/26/2018:svnASUSTeKCOMPUTERINC.:pnZenAIO27Z272SD_Z272SD:pvr1.0:rvnASUSTeKCOMPUTERINC.:rnZ272SD:rvr1.0:cvnASUSTeKCOMPUTERINC.:ct13:cvr1.0: dmi.product.family: Zen AIO dmi.product.name: Zen AIO 27 Z272SD_Z272SD dmi.product.version: 1.0 dmi.sys.vendor: ASUSTeK COMPUTER INC. To manage notifications about this bug go to:
[Touch-packages] [Bug 1821936] Re: ALC274 unsupported
apport information ** Tags added: apport-collected bionic ** Description changed: I find this to be an issue with current LTS 18.04's latest 4.19 kernel. I tested this on mainline 4.20 and 5.0 kernels as well. No audio because ALC274 not properly loaded for use, so no audio output. A related card had a similar bug, which was fixed, and may be of use in resolving this one: https://bugs.launchpad.net/ubuntu/+source/alsa- driver/+bug/1784485 # cat /proc/asound/card0/codec* | grep Codec Codec: Realtek ALC274 Codec: Intel Kabylake HDMI # cat /proc/asound/card0/pcm0c/info card: 0 device: 0 subdevice: 0 stream: CAPTURE id: ALC274 Analog name: ALC274 Analog subname: subdevice #0 class: 0 subclass: 0 subdevices_count: 1 subdevices_avail: 0 aplay -l List of PLAYBACK Hardware Devices card 0: PCH [HDA Intel PCH], device 0: ALC274 Analog [ALC274 Analog] Subdevices: 1/1 Subdevice #0: subdevice #0 card 0: PCH [HDA Intel PCH], device 3: HDMI 0 [HDMI 0] Subdevices: 1/1 Subdevice #0: subdevice #0 card 0: PCH [HDA Intel PCH], device 7: HDMI 1 [HDMI 1] Subdevices: 1/1 Subdevice #0: subdevice #0 card 0: PCH [HDA Intel PCH], device 8: HDMI 2 [HDMI 2] Subdevices: 1/1 Subdevice #0: subdevice #0 card 0: PCH [HDA Intel PCH], device 9: HDMI 3 [HDMI 3] Subdevices: 1/1 Subdevice #0: subdevice #0 card 0: PCH [HDA Intel PCH], device 10: HDMI 4 [HDMI 4] Subdevices: 1/1 Subdevice #0: subdevice #0 d# hwinfo --sound 21: PCI 1f.3: 0403 Audio device [Created at pci.378] Unique ID: nS1_.WnojYJLVCm0 SysFS ID: /devices/pci:00/:00:1f.3 SysFS BusID: :00:1f.3 Hardware Class: sound Model: "Intel Audio device" Vendor: pci 0x8086 "Intel Corporation" Device: pci 0xa348 SubVendor: pci 0x1043 "ASUSTeK Computer Inc." SubDevice: pci 0x31d0 Revision: 0x10 Driver: "snd_hda_intel" Driver Modules: "snd_hda_intel" Memory Range: 0xdd398000-0xdd39bfff (rw,non-prefetchable) Memory Range: 0xdd10-0xdd1f (rw,non-prefetchable) IRQ: 145 (663 events) Module Alias: "pci:v8086dA348sv1043sd31D0bc04sc03i80" Driver Info #0: Driver Status: snd_hda_intel is active Driver Activation Cmd: "modprobe snd_hda_intel" Config Status: cfg=new, avail=yes, need=no, active=unknown + --- + ProblemType: Bug + ApportVersion: 2.20.9-0ubuntu7.6 + Architecture: amd64 + AudioDevicesInUse: + USERPID ACCESS COMMAND + /dev/snd/controlC0: gdm1903 F pulseaudio + derek 2464 F pulseaudio + DistroRelease: Ubuntu 18.04 + InstallationDate: Installed on 2019-03-23 (5 days ago) + InstallationMedia: Ubuntu 18.04.2 LTS "Bionic Beaver" - Release amd64 (20190210) + MachineType: ASUSTeK COMPUTER INC. Zen AIO 27 Z272SD_Z272SD + NonfreeKernelModules: nvidia_modeset nvidia + Package: linux (not installed) + ProcEnviron: + TERM=xterm-256color + PATH=(custom, no user) + XDG_RUNTIME_DIR= + LANG=en_US.UTF-8 + SHELL=/bin/bash + ProcFB: 0 inteldrmfb + ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-4.18.0-16-generic root=UUID=a3d569a1-6262-4609-b2f5-199dbabf57cb ro quiet splash + ProcVersionSignature: Ubuntu 4.18.0-16.17~18.04.1-generic 4.18.20 + PulseList: Error: command ['pacmd', 'list'] failed with exit code 1: No PulseAudio daemon running, or not running as session daemon. + RelatedPackageVersions: + linux-restricted-modules-4.18.0-16-generic N/A + linux-backports-modules-4.18.0-16-generic N/A + linux-firmware 1.173.3 + Tags: bionic + Uname: Linux 4.18.0-16-generic x86_64 + UpgradeStatus: No upgrade log present (probably fresh install) + UserGroups: + + _MarkForUpload: True + dmi.bios.date: 09/26/2018 + dmi.bios.vendor: American Megatrends Inc. + dmi.bios.version: Z272SD.300 + dmi.board.asset.tag: ATN12345678901234567 + dmi.board.name: Z272SD + dmi.board.vendor: ASUSTeK COMPUTER INC. + dmi.board.version: 1.0 + dmi.chassis.asset.tag: No Asset Tag + dmi.chassis.type: 13 + dmi.chassis.vendor: ASUSTeK COMPUTER INC. + dmi.chassis.version: 1.0 + dmi.modalias: dmi:bvnAmericanMegatrendsInc.:bvrZ272SD.300:bd09/26/2018:svnASUSTeKCOMPUTERINC.:pnZenAIO27Z272SD_Z272SD:pvr1.0:rvnASUSTeKCOMPUTERINC.:rnZ272SD:rvr1.0:cvnASUSTeKCOMPUTERINC.:ct13:cvr1.0: + dmi.product.family: Zen AIO + dmi.product.name: Zen AIO 27 Z272SD_Z272SD + dmi.product.version: 1.0 + dmi.sys.vendor: ASUSTeK COMPUTER INC. ** Attachment added: "AlsaInfo.txt" https://bugs.launchpad.net/bugs/1821936/+attachment/5250285/+files/AlsaInfo.txt -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to alsa-driver in Ubuntu. https://bugs.launchpad.net/bugs/1821936 Title: ALC274 unsupported Status in alsa-driver package in Ubuntu: Incomplete Status in linux package in Ubuntu: Incomplete Bug description: I
[Touch-packages] [Bug 1821936] CurrentDmesg.txt
apport information ** Attachment added: "CurrentDmesg.txt" https://bugs.launchpad.net/bugs/1821936/+attachment/5250287/+files/CurrentDmesg.txt -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to alsa-driver in Ubuntu. https://bugs.launchpad.net/bugs/1821936 Title: ALC274 unsupported Status in alsa-driver package in Ubuntu: Incomplete Status in linux package in Ubuntu: Incomplete Bug description: I find this to be an issue with current LTS 18.04's latest 4.19 kernel. I tested this on mainline 4.20 and 5.0 kernels as well. No audio because ALC274 not properly loaded for use, so no audio output. A related card had a similar bug, which was fixed, and may be of use in resolving this one: https://bugs.launchpad.net/ubuntu/+source/alsa-driver/+bug/1784485 # cat /proc/asound/card0/codec* | grep Codec Codec: Realtek ALC274 Codec: Intel Kabylake HDMI # cat /proc/asound/card0/pcm0c/info card: 0 device: 0 subdevice: 0 stream: CAPTURE id: ALC274 Analog name: ALC274 Analog subname: subdevice #0 class: 0 subclass: 0 subdevices_count: 1 subdevices_avail: 0 aplay -l List of PLAYBACK Hardware Devices card 0: PCH [HDA Intel PCH], device 0: ALC274 Analog [ALC274 Analog] Subdevices: 1/1 Subdevice #0: subdevice #0 card 0: PCH [HDA Intel PCH], device 3: HDMI 0 [HDMI 0] Subdevices: 1/1 Subdevice #0: subdevice #0 card 0: PCH [HDA Intel PCH], device 7: HDMI 1 [HDMI 1] Subdevices: 1/1 Subdevice #0: subdevice #0 card 0: PCH [HDA Intel PCH], device 8: HDMI 2 [HDMI 2] Subdevices: 1/1 Subdevice #0: subdevice #0 card 0: PCH [HDA Intel PCH], device 9: HDMI 3 [HDMI 3] Subdevices: 1/1 Subdevice #0: subdevice #0 card 0: PCH [HDA Intel PCH], device 10: HDMI 4 [HDMI 4] Subdevices: 1/1 Subdevice #0: subdevice #0 d# hwinfo --sound 21: PCI 1f.3: 0403 Audio device [Created at pci.378] Unique ID: nS1_.WnojYJLVCm0 SysFS ID: /devices/pci:00/:00:1f.3 SysFS BusID: :00:1f.3 Hardware Class: sound Model: "Intel Audio device" Vendor: pci 0x8086 "Intel Corporation" Device: pci 0xa348 SubVendor: pci 0x1043 "ASUSTeK Computer Inc." SubDevice: pci 0x31d0 Revision: 0x10 Driver: "snd_hda_intel" Driver Modules: "snd_hda_intel" Memory Range: 0xdd398000-0xdd39bfff (rw,non-prefetchable) Memory Range: 0xdd10-0xdd1f (rw,non-prefetchable) IRQ: 145 (663 events) Module Alias: "pci:v8086dA348sv1043sd31D0bc04sc03i80" Driver Info #0: Driver Status: snd_hda_intel is active Driver Activation Cmd: "modprobe snd_hda_intel" Config Status: cfg=new, avail=yes, need=no, active=unknown --- ProblemType: Bug ApportVersion: 2.20.9-0ubuntu7.6 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: gdm1903 F pulseaudio derek 2464 F pulseaudio DistroRelease: Ubuntu 18.04 InstallationDate: Installed on 2019-03-23 (5 days ago) InstallationMedia: Ubuntu 18.04.2 LTS "Bionic Beaver" - Release amd64 (20190210) MachineType: ASUSTeK COMPUTER INC. Zen AIO 27 Z272SD_Z272SD NonfreeKernelModules: nvidia_modeset nvidia Package: linux (not installed) ProcEnviron: TERM=xterm-256color PATH=(custom, no user) XDG_RUNTIME_DIR= LANG=en_US.UTF-8 SHELL=/bin/bash ProcFB: 0 inteldrmfb ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-4.18.0-16-generic root=UUID=a3d569a1-6262-4609-b2f5-199dbabf57cb ro quiet splash ProcVersionSignature: Ubuntu 4.18.0-16.17~18.04.1-generic 4.18.20 PulseList: Error: command ['pacmd', 'list'] failed with exit code 1: No PulseAudio daemon running, or not running as session daemon. RelatedPackageVersions: linux-restricted-modules-4.18.0-16-generic N/A linux-backports-modules-4.18.0-16-generic N/A linux-firmware 1.173.3 Tags: bionic Uname: Linux 4.18.0-16-generic x86_64 UpgradeStatus: No upgrade log present (probably fresh install) UserGroups: _MarkForUpload: True dmi.bios.date: 09/26/2018 dmi.bios.vendor: American Megatrends Inc. dmi.bios.version: Z272SD.300 dmi.board.asset.tag: ATN12345678901234567 dmi.board.name: Z272SD dmi.board.vendor: ASUSTeK COMPUTER INC. dmi.board.version: 1.0 dmi.chassis.asset.tag: No Asset Tag dmi.chassis.type: 13 dmi.chassis.vendor: ASUSTeK COMPUTER INC. dmi.chassis.version: 1.0 dmi.modalias: dmi:bvnAmericanMegatrendsInc.:bvrZ272SD.300:bd09/26/2018:svnASUSTeKCOMPUTERINC.:pnZenAIO27Z272SD_Z272SD:pvr1.0:rvnASUSTeKCOMPUTERINC.:rnZ272SD:rvr1.0:cvnASUSTeKCOMPUTERINC.:ct13:cvr1.0: dmi.product.family: Zen AIO dmi.product.name: Zen AIO 27 Z272SD_Z272SD dmi.product.version: 1.0 dmi.sys.vendor: ASUSTeK COMPUTER INC. To manage notifications about this bug go to:
[Touch-packages] [Bug 1821936] CRDA.txt
apport information ** Attachment added: "CRDA.txt" https://bugs.launchpad.net/bugs/1821936/+attachment/5250286/+files/CRDA.txt -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to alsa-driver in Ubuntu. https://bugs.launchpad.net/bugs/1821936 Title: ALC274 unsupported Status in alsa-driver package in Ubuntu: Incomplete Status in linux package in Ubuntu: Incomplete Bug description: I find this to be an issue with current LTS 18.04's latest 4.19 kernel. I tested this on mainline 4.20 and 5.0 kernels as well. No audio because ALC274 not properly loaded for use, so no audio output. A related card had a similar bug, which was fixed, and may be of use in resolving this one: https://bugs.launchpad.net/ubuntu/+source/alsa-driver/+bug/1784485 # cat /proc/asound/card0/codec* | grep Codec Codec: Realtek ALC274 Codec: Intel Kabylake HDMI # cat /proc/asound/card0/pcm0c/info card: 0 device: 0 subdevice: 0 stream: CAPTURE id: ALC274 Analog name: ALC274 Analog subname: subdevice #0 class: 0 subclass: 0 subdevices_count: 1 subdevices_avail: 0 aplay -l List of PLAYBACK Hardware Devices card 0: PCH [HDA Intel PCH], device 0: ALC274 Analog [ALC274 Analog] Subdevices: 1/1 Subdevice #0: subdevice #0 card 0: PCH [HDA Intel PCH], device 3: HDMI 0 [HDMI 0] Subdevices: 1/1 Subdevice #0: subdevice #0 card 0: PCH [HDA Intel PCH], device 7: HDMI 1 [HDMI 1] Subdevices: 1/1 Subdevice #0: subdevice #0 card 0: PCH [HDA Intel PCH], device 8: HDMI 2 [HDMI 2] Subdevices: 1/1 Subdevice #0: subdevice #0 card 0: PCH [HDA Intel PCH], device 9: HDMI 3 [HDMI 3] Subdevices: 1/1 Subdevice #0: subdevice #0 card 0: PCH [HDA Intel PCH], device 10: HDMI 4 [HDMI 4] Subdevices: 1/1 Subdevice #0: subdevice #0 d# hwinfo --sound 21: PCI 1f.3: 0403 Audio device [Created at pci.378] Unique ID: nS1_.WnojYJLVCm0 SysFS ID: /devices/pci:00/:00:1f.3 SysFS BusID: :00:1f.3 Hardware Class: sound Model: "Intel Audio device" Vendor: pci 0x8086 "Intel Corporation" Device: pci 0xa348 SubVendor: pci 0x1043 "ASUSTeK Computer Inc." SubDevice: pci 0x31d0 Revision: 0x10 Driver: "snd_hda_intel" Driver Modules: "snd_hda_intel" Memory Range: 0xdd398000-0xdd39bfff (rw,non-prefetchable) Memory Range: 0xdd10-0xdd1f (rw,non-prefetchable) IRQ: 145 (663 events) Module Alias: "pci:v8086dA348sv1043sd31D0bc04sc03i80" Driver Info #0: Driver Status: snd_hda_intel is active Driver Activation Cmd: "modprobe snd_hda_intel" Config Status: cfg=new, avail=yes, need=no, active=unknown --- ProblemType: Bug ApportVersion: 2.20.9-0ubuntu7.6 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: gdm1903 F pulseaudio derek 2464 F pulseaudio DistroRelease: Ubuntu 18.04 InstallationDate: Installed on 2019-03-23 (5 days ago) InstallationMedia: Ubuntu 18.04.2 LTS "Bionic Beaver" - Release amd64 (20190210) MachineType: ASUSTeK COMPUTER INC. Zen AIO 27 Z272SD_Z272SD NonfreeKernelModules: nvidia_modeset nvidia Package: linux (not installed) ProcEnviron: TERM=xterm-256color PATH=(custom, no user) XDG_RUNTIME_DIR= LANG=en_US.UTF-8 SHELL=/bin/bash ProcFB: 0 inteldrmfb ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-4.18.0-16-generic root=UUID=a3d569a1-6262-4609-b2f5-199dbabf57cb ro quiet splash ProcVersionSignature: Ubuntu 4.18.0-16.17~18.04.1-generic 4.18.20 PulseList: Error: command ['pacmd', 'list'] failed with exit code 1: No PulseAudio daemon running, or not running as session daemon. RelatedPackageVersions: linux-restricted-modules-4.18.0-16-generic N/A linux-backports-modules-4.18.0-16-generic N/A linux-firmware 1.173.3 Tags: bionic Uname: Linux 4.18.0-16-generic x86_64 UpgradeStatus: No upgrade log present (probably fresh install) UserGroups: _MarkForUpload: True dmi.bios.date: 09/26/2018 dmi.bios.vendor: American Megatrends Inc. dmi.bios.version: Z272SD.300 dmi.board.asset.tag: ATN12345678901234567 dmi.board.name: Z272SD dmi.board.vendor: ASUSTeK COMPUTER INC. dmi.board.version: 1.0 dmi.chassis.asset.tag: No Asset Tag dmi.chassis.type: 13 dmi.chassis.vendor: ASUSTeK COMPUTER INC. dmi.chassis.version: 1.0 dmi.modalias: dmi:bvnAmericanMegatrendsInc.:bvrZ272SD.300:bd09/26/2018:svnASUSTeKCOMPUTERINC.:pnZenAIO27Z272SD_Z272SD:pvr1.0:rvnASUSTeKCOMPUTERINC.:rnZ272SD:rvr1.0:cvnASUSTeKCOMPUTERINC.:ct13:cvr1.0: dmi.product.family: Zen AIO dmi.product.name: Zen AIO 27 Z272SD_Z272SD dmi.product.version: 1.0 dmi.sys.vendor: ASUSTeK COMPUTER INC. To manage notifications about this bug go to:
[Touch-packages] [Bug 1733002] Re: Google Online Account Two Factor with hardware key fails immediately
** Changed in: gnome-online-accounts (Ubuntu) Status: New => Triaged -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to gnome-online-accounts in Ubuntu. https://bugs.launchpad.net/bugs/1733002 Title: Google Online Account Two Factor with hardware key fails immediately Status in gnome-online-accounts: Unknown Status in gnome-online-accounts package in Ubuntu: Triaged Bug description: The hardware key authentication two factor fails immediately with a web based retry dialogue when connecting a Google account to the online accounts in settings using a hardware key second factor. Steps to reproduce: 1. Set Google Account to default to a hardware security key like a Yubikey or other FIDO standard key after having two factor authentication enabled on your Google Account. 2. Open Online accounts 3. Add a Google Account 4. Enter google email address 5. Enter google password 6. (this is the login flow of two factor, if default is the hardware key the error should appear). Work around: Choose use another method to authenticate: enter the authentication code and you will proceed. Expectations were: The ability to use the hardware key to authenticate as the second factor. ProblemType: Bug DistroRelease: Ubuntu 17.10 Package: gnome-control-center 1:3.26.1-0ubuntu5 ProcVersionSignature: Ubuntu 4.13.0-16.19-lowlatency 4.13.4 Uname: Linux 4.13.0-16-lowlatency x86_64 NonfreeKernelModules: nvidia_uvm nvidia_drm nvidia_modeset nvidia ApportVersion: 2.20.7-0ubuntu3.4 Architecture: amd64 CurrentDesktop: ubuntu:GNOME Date: Fri Nov 17 16:01:11 2017 EcryptfsInUse: Yes ExecutablePath: /usr/bin/gnome-control-center ProcEnviron: XDG_RUNTIME_DIR= SHELL=/bin/bash PATH=(custom, user) LANG=en_US.UTF-8 SourcePackage: gnome-control-center UpgradeStatus: No upgrade log present (probably fresh install) To manage notifications about this bug go to: https://bugs.launchpad.net/gnome-online-accounts/+bug/1733002/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1822184] Re: clear_console locks up video when X is running and you log out from a plain text console
The attachment "makes clear_console switch to either tty6 or tty5 instead of tty1/tty2" seems to be a patch. If it isn't, please remove the "patch" flag from the attachment, remove the "patch" tag, and if you are a member of the ~ubuntu-reviewers, unsubscribe the team. [This is an automated message performed by a Launchpad user owned by ~brian-murray, for any issues please contact him.] ** Tags added: patch -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to bash in Ubuntu. https://bugs.launchpad.net/bugs/1822184 Title: clear_console locks up video when X is running and you log out from a plain text console Status in bash package in Ubuntu: New Bug description: References: https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=810660 https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=866898 If X is running and you switch to a plain text console (ie ctrl-alt-f3), log in as a regular user, and then log out, the display switches back to the graphical login screen and locks up. The system is still functioning (can ssh in, etc) but the video output is frozen. The underlying cause is: https://gitlab.freedesktop.org/xorg/xserver/issues/492 However, the problem can at least be worked around by making clear_console switch to tty 6 and back instead of switching to 1 and back. This patch corrects the problem: --- bash-4.4.18.orig/debian/clear_console.c 2019-03-28 12:09:02.415907787 -0400 +++ bash-4.4.18/debian/clear_console.c 2019-03-28 12:08:11.984366858 -0400 @@ -205,7 +205,7 @@ #if defined(__linux__) num = vtstat.v_active; #endif - tmp_num = (num == 1 ? 2 : 1); + tmp_num = (num == 6 ? 5 : 6); /* switch vt to clear the scrollback buffer */ if (ioctl(fd, VT_ACTIVATE, tmp_num)) To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/bash/+bug/1822184/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1820929] Re: netplan should consider adding more udev attribute for exact matching of failover 3-netdev interfaces
Before answering your quesitions, I would wonder what do you know generates the /run/netplan/ens3.yaml file in the first place? This YAML file is not provided by us obviously, the only netplan config we have on the root disk is /etc/netplan/01-netcfg.yaml, derived from the debian installer. The YAML under /run overrides the one under /etc, for the DHCP case, and that's where the odds about the additional udev rule and various config options came from. The DHCP server in our lab setup might have directed netroot to iSCSI so that *might* explain where the /run/netplan/ens3.yaml with tne extra match-mac, dhcp-identifier and critical options? $ lsscsi -t [6:0:0:0]storage iqn.2015-02.oracletest.boot:uefi,t,0x1 - [6:0:0:1]diskiqn.2015-02.oracletest.boot:uefi,t,0x1 /dev/sda -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to systemd in Ubuntu. https://bugs.launchpad.net/bugs/1820929 Title: netplan should consider adding more udev attribute for exact matching of failover 3-netdev interfaces Status in netplan: Triaged Status in netplan.io package in Ubuntu: Triaged Status in systemd package in Ubuntu: Incomplete Bug description: This bug is a follow-up to https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1815268 after applying the 0001-net_failover-delay-taking-over-primary-device- to-acc.patch attached in that bug, the VF interface "eth0" is renamed to "rename4" instead of "ens4". Log is showing that attempt to rename "eth0" to "ens3" failed because of conflict with existing name, so that's why it ends up with rename4. vsbalakr@ubuntu-18:~$ uname -a Linux ubuntu-18 4.15.0-1009-oracle #11+lp1815268 SMP Tue Mar 12 15:20:15 UTC 2019 x86_64 x86_64 x86_64 GNU/Linux vsbalakr@ubuntu-18:~$ ip l 1: lo: mtu 65536 qdisc noqueue state UNKNOWN mode DEFAULT group default qlen 1000 link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00 2: ens3: mtu 1500 qdisc noqueue state UP mode DEFAULT group default qlen 1000 link/ether ba:fb:9f:12:2f:02 brd ff:ff:ff:ff:ff:ff 3: ens3nsby: mtu 1500 qdisc pfifo_fast master ens3 state UP mode DEFAULT group default qlen 1000 link/ether ba:fb:9f:12:2f:02 brd ff:ff:ff:ff:ff:ff 4: rename4: mtu 1500 qdisc mq master ens3 state UP mode DEFAULT group default qlen 1000 link/ether ba:fb:9f:12:2f:02 brd ff:ff:ff:ff:ff:ff vsbalakr@ubuntu-18:~$ egrep -i '(rename4|busy)' /var/log/syslog ... Mar 18 11:01:52 ubuntu-18 NetworkManager[1294]: [1552932112.9591] device (rename4): carrier: link connected Mar 18 11:01:52 ubuntu-18 NetworkManager[1294]: [1552932112.9591] device (rename4): enslaved to non-master-type device ens3; ignoring Mar 18 11:01:53 ubuntu-18 systemd-udevd[2463]: error changing net interface name 'eth0' to 'ens3': Device or resource busy Mar 18 11:01:53 ubuntu-18 systemd-udevd[2463]: could not rename interface '4' from 'eth0' to 'ens3': Device or resource busy Within VM there's netplan config as below: vsbalakr@ubuntu-18:~$ cat /etc/netplan/01-netcfg.yaml # This file describes the network interfaces available on your system # For more information, see netplan(5). network: version: 2 renderer: networkd ethernets: ens3: dhcp4: yes gateway4: 10.211.8.1 nameservers: addresses: [10.211.11.1,10.209.76.197] By running udevadm test, we can see the conflicting ens3 name comes from netplan's /run/udev/rules.d/99-netplan-ens3.rules vsbalakr@ubuntu-18:~$ cat /run/udev/rules.d/99-netplan-ens3.rules SUBSYSTEM=="net", ACTION=="add", DRIVERS=="?*", ATTR{address}=="ba:fb:9f:12:2f:02", NAME="ens3" vsbalakr@ubuntu-18:/lib/udev/rules.d$ udevadm test --action="add" /sys/class/net/eth0 calling: test version 237 This program is for debugging only, it does not run any program specified by a RUN key. It may show incorrect results, because some values may be different, or not available at a simulation run. Load module index Parsed configuration file /lib/systemd/network/99-default.link Parsed configuration file /run/systemd/network/10-netplan-ens3.link Created link configuration context. Reading rules file: /lib/udev/rules.d/01-md-raid-creating.rules .. Reading rules file: /lib/udev/rules.d/99-vmware-scsi-udev.rules rules contain 393216 bytes tokens (32768 * 12 bytes), 38638 bytes strings 25317 strings (216160 bytes), 21957 de-duplicated (180883 bytes), 3361 trie nodes used RUN '/lib/open-iscsi/net-interface-handler start' /lib/udev/rules.d/70-iscsi-network-interface.rules:2 IMPORT builtin 'net_id' /lib/udev/rules.d/75-net-description.rules:6 IMPORT builtin 'hwdb' /lib/udev/rules.d/75-net-description.rules:12 RUN 'ifupdown-hotplug' /lib/udev/rules.d/80-ifupdown.rules:5 IMPORT builtin 'path_id' /lib/udev/rules.d/80-net-setup-link.rules:5 IMPORT builtin 'net_setup_link' /lib/udev/rules.d/80-net-setup-link.rules:9 Config file
[Touch-packages] [Bug 1820132] Re: /usr/share/apport/whoopsie-upload-all:AssertionError:/usr/share/apport/whoopsie-upload-all@162:collect_info:process_report:add_gdb_info:gdb_command
Actually, I was looking at the wrong thing what's really missing is the executable which crashed from the top of the function gdb_command: assert 'ExecutablePath' in self executable = self.get('InterpreterPath', self['ExecutablePath']) While it makes sense for apport-retrace to have an AssertionError if the executable doesn't exist I don't think whoopsie-upload-all necessarily should just because it isn't on the client system doesn't mean the retracers won't be able to install it. -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to apport in Ubuntu. https://bugs.launchpad.net/bugs/1820132 Title: /usr/share/apport/whoopsie-upload-all:AssertionError:/usr/share/apport /whoopsie-upload- all@162:collect_info:process_report:add_gdb_info:gdb_command Status in apport package in Ubuntu: Triaged Status in apport source package in Disco: Triaged Bug description: The Ubuntu Error Tracker has been receiving reports about a problem regarding apport. This problem was most recently seen with package version 2.20.10-0ubuntu23, the problem page at https://errors.ubuntu.com/problem/4a48673e60f08b7d2b9067d1b47766a57f7e693e contains more details, including versions of packages affected, stacktrace or traceback, and individual crash reports. If you do not have access to the Ubuntu Error Tracker and are a software developer, you can request it at http://forms.canonical.com/reports/. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/apport/+bug/1820132/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1821867] Re: network interface is down after post-install reboot of a default disco installation
** Changed in: systemd (Ubuntu) Status: New => Invalid ** No longer affects: systemd (Ubuntu) ** Changed in: ubuntu-z-systems Status: Triaged => In Progress -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to systemd in Ubuntu. https://bugs.launchpad.net/bugs/1821867 Title: network interface is down after post-install reboot of a default disco installation Status in Ubuntu on IBM z Systems: In Progress Status in netplan.io package in Ubuntu: In Progress Bug description: [Impact] Minimal installs using netplan to configure the network. [Test case] 1) Install Ubuntu minimal server / cloud image 2) Edit /etc/netplan/01-netcfg.yaml to configure the network as necessary. 3) Run 'sudo netplan apply'. Verify that the network comes up correctly. 4) Reboot. 5) Verify that the network comes up properly. [Regression potential] Minimal; this reverts changes in a package that was never released to -updates, only available as SRU in -proposed and on the devel release. This only applies to the order in which systemd-networkd is enabled when used as a renderer for netplan configuration, to start in multi-user.target instead of the "correct", but inefficient "network-online.target" as the latter may not be depended upon in minimal installs. --- After doing a default disco installation on s390x using the beta ISO image aka daily from March 26th and the post-install reboot the system restarts aka reipls (in z/VM in this case) but the interface is not brought up. Hence no remote connections are possible. The ip cmd shows: ip a 1: lo: mtu 65536 qdisc noqueue state UNKNOWN group defaul t qlen 1000 link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00 inet 127.0.0.1/8 scope host lo valid_lft forever preferred_lft forever inet6 ::1/128 scope host valid_lft forever preferred_lft forever 2: enc600: mtu 1500 qdisc noop state DOWN group default ql en 1000 link/ether 02:28:0b:00:00:15 brd ff:ff:ff:ff:ff:ff The netplan yaml file looks fine: cat /etc/netplan/*.yaml # This file describes the network interfaces available on your system # For more information, see netplan(5). network: version: 2 renderer: networkd ethernets: enc600: addresses: ¬ 10.245.236.27/24 | gateway4: 10.245.236.1 nameservers: search: ¬ canonical.com | addresses: - "10.245.236.1" Using ip to bring the interface up doesn't help: buntu§hwe0007:ß$ sudo ip link set enc600 up sudo ip link set enc600 up ubuntu§hwe0007:ß$ ip addr show enc600 ip addr show enc600 2: enc600: mtu 1500 qdisc fq_codel state UP gr oup default qlen 1000 link/ether 02:28:0b:00:00:15 brd ff:ff:ff:ff:ff:ff inet6 fe80::28:bff:fe00:15/64 scope link valid_lft forever preferred_lft forever ubuntu§hwe0007:ß$ But finally executing netplan apply does help: sudo netplan apply --dryrun sudo netplan apply --dryrun ubuntu§hwe0007:ß$ sudo netplan apply sudo netplan apply ubuntu§hwe0007:ß$ ip addr show enc600 ip addr show enc600 2: enc600: mtu 1500 qdisc fq_codel state UP gr oup default qlen 1000 link/ether 02:28:0b:00:00:15 brd ff:ff:ff:ff:ff:ff inet 10.245.236.27/24 brd 10.245.236.255 scope global enc600 valid_lft forever preferred_lft forever inet6 fe80::28:bff:fe00:15/64 scope link valid_lft forever preferred_lft forever ubuntu§hwe0007:ß$ (Sorry for the partly duplicate lines and some strange characters, but this is due to the fact that I copied the output from the console that requires a 3270 terminal emulation) To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu-z-systems/+bug/1821867/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1682883] Re: Missing 2560x1440 resolution on a Dell XPS 2720 all-in-one
The bug is still present in all subsequent versions of Ubuntu (17.10, 18.04 and 18.10). -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to xorg in Ubuntu. https://bugs.launchpad.net/bugs/1682883 Title: Missing 2560x1440 resolution on a Dell XPS 2720 all-in-one Status in xorg package in Ubuntu: Won't Fix Bug description: The problem appeared after a distro upgrade from Ubuntu 16.10 to Ubuntu 17.04 (kernel 4.10.0-19-generic). The issue doesn't exist when booting with the previous kernel (4.8.0-46-generic). ProblemType: Bug DistroRelease: Ubuntu 17.04 Package: xorg 1:7.7+16ubuntu3 ProcVersionSignature: Ubuntu 4.10.0-19.21-generic 4.10.8 Uname: Linux 4.10.0-19-generic x86_64 .tmp.unity_support_test.0: ApportVersion: 2.20.4-0ubuntu4 Architecture: amd64 CompizPlugins: No value set for `/apps/compiz-1/general/screen0/options/active_plugins' CompositorRunning: compiz CompositorUnredirectDriverBlacklist: '(nouveau|Intel).*Mesa 8.0' CompositorUnredirectFSW: true CurrentDesktop: Unity:Unity7 Date: Fri Apr 14 19:03:35 2017 DistUpgraded: 2017-04-14 16:22:07,220 ERROR got error from PostInstallScript ./xorg_fix_proprietary.py (g-exec-error-quark: Esecuzione del processo figlio "./xorg_fix_proprietary.py" non riuscita (No such file or directory) (8)) DistroCodename: zesty DistroVariant: ubuntu DkmsStatus: bbswitch, 0.8, 4.10.0-19-generic, x86_64: installed bbswitch, 0.8, 4.8.0-46-generic, x86_64: installed nvidia-375, 375.39, 4.10.0-19-generic, x86_64: installed nvidia-375, 375.39, 4.8.0-46-generic, x86_64: installed ExtraDebuggingInterest: Yes GraphicsCard: Intel Corporation Xeon E3-1200 v3/4th Gen Core Processor Integrated Graphics Controller [8086:0412] (rev 06) (prog-if 00 [VGA controller]) Subsystem: Dell Xeon E3-1200 v3/4th Gen Core Processor Integrated Graphics Controller [1028:05b0] NVIDIA Corporation GK107M [GeForce GT 750M] [10de:0fe4] (rev a1) (prog-if 00 [VGA controller]) Subsystem: Dell GK107M [GeForce GT 750M] [1028:05b0] InstallationDate: Installed on 2015-01-17 (818 days ago) InstallationMedia: Ubuntu 14.10 "Utopic Unicorn" - Release amd64 (20141022.1) MachineType: Dell Inc. XPS 2720 ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-4.10.0-19-generic.efi.signed root=UUID=d1a29a63-27bc-4b4f-b455-9be750a1356e ro quiet splash vt.handoff=7 SourcePackage: xorg Symptom: display UpgradeStatus: Upgraded to zesty on 2017-04-14 (0 days ago) dmi.bios.date: 11/13/2015 dmi.bios.vendor: Dell Inc. dmi.bios.version: A13 dmi.board.name: 05R2TK dmi.board.vendor: Dell Inc. dmi.board.version: A00 dmi.chassis.type: 13 dmi.chassis.vendor: Dell Inc. dmi.chassis.version: 00 dmi.modalias: dmi:bvnDellInc.:bvrA13:bd11/13/2015:svnDellInc.:pnXPS2720:pvr00:rvnDellInc.:rn05R2TK:rvrA00:cvnDellInc.:ct13:cvr00: dmi.product.name: XPS 2720 dmi.product.version: 00 dmi.sys.vendor: Dell Inc. version.compiz: compiz 1:0.9.13.1+17.04.20170109-0ubuntu1 version.ia32-libs: ia32-libs N/A version.libdrm2: libdrm2 2.4.76-1 version.libgl1-mesa-dri: libgl1-mesa-dri 17.0.3-1ubuntu1 version.libgl1-mesa-dri-experimental: libgl1-mesa-dri-experimental N/A version.libgl1-mesa-glx: libgl1-mesa-glx 17.0.3-1ubuntu1 version.xserver-xorg-core: xserver-xorg-core 2:1.19.3-1ubuntu1 version.xserver-xorg-input-evdev: xserver-xorg-input-evdev 1:2.10.5-1ubuntu1 version.xserver-xorg-video-ati: xserver-xorg-video-ati 1:7.9.0-0ubuntu1 version.xserver-xorg-video-intel: xserver-xorg-video-intel 2:2.99.917+git20170309-0ubuntu1 version.xserver-xorg-video-nouveau: xserver-xorg-video-nouveau 1:1.0.14-0ubuntu1 xserver.bootTime: Fri Apr 14 18:53:04 2017 xserver.configfile: default xserver.errors: xserver.logfile: /var/log/Xorg.0.log xserver.version: 2:1.19.3-1ubuntu1 xserver.video_driver: modeset To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/xorg/+bug/1682883/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1682883] Re: Missing 2560x1440 resolution on a Dell XPS 2720 all-in-one
Bug confirmed on newer versions of Ubuntu also. -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to xorg in Ubuntu. https://bugs.launchpad.net/bugs/1682883 Title: Missing 2560x1440 resolution on a Dell XPS 2720 all-in-one Status in xorg package in Ubuntu: Won't Fix Bug description: The problem appeared after a distro upgrade from Ubuntu 16.10 to Ubuntu 17.04 (kernel 4.10.0-19-generic). The issue doesn't exist when booting with the previous kernel (4.8.0-46-generic). ProblemType: Bug DistroRelease: Ubuntu 17.04 Package: xorg 1:7.7+16ubuntu3 ProcVersionSignature: Ubuntu 4.10.0-19.21-generic 4.10.8 Uname: Linux 4.10.0-19-generic x86_64 .tmp.unity_support_test.0: ApportVersion: 2.20.4-0ubuntu4 Architecture: amd64 CompizPlugins: No value set for `/apps/compiz-1/general/screen0/options/active_plugins' CompositorRunning: compiz CompositorUnredirectDriverBlacklist: '(nouveau|Intel).*Mesa 8.0' CompositorUnredirectFSW: true CurrentDesktop: Unity:Unity7 Date: Fri Apr 14 19:03:35 2017 DistUpgraded: 2017-04-14 16:22:07,220 ERROR got error from PostInstallScript ./xorg_fix_proprietary.py (g-exec-error-quark: Esecuzione del processo figlio "./xorg_fix_proprietary.py" non riuscita (No such file or directory) (8)) DistroCodename: zesty DistroVariant: ubuntu DkmsStatus: bbswitch, 0.8, 4.10.0-19-generic, x86_64: installed bbswitch, 0.8, 4.8.0-46-generic, x86_64: installed nvidia-375, 375.39, 4.10.0-19-generic, x86_64: installed nvidia-375, 375.39, 4.8.0-46-generic, x86_64: installed ExtraDebuggingInterest: Yes GraphicsCard: Intel Corporation Xeon E3-1200 v3/4th Gen Core Processor Integrated Graphics Controller [8086:0412] (rev 06) (prog-if 00 [VGA controller]) Subsystem: Dell Xeon E3-1200 v3/4th Gen Core Processor Integrated Graphics Controller [1028:05b0] NVIDIA Corporation GK107M [GeForce GT 750M] [10de:0fe4] (rev a1) (prog-if 00 [VGA controller]) Subsystem: Dell GK107M [GeForce GT 750M] [1028:05b0] InstallationDate: Installed on 2015-01-17 (818 days ago) InstallationMedia: Ubuntu 14.10 "Utopic Unicorn" - Release amd64 (20141022.1) MachineType: Dell Inc. XPS 2720 ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-4.10.0-19-generic.efi.signed root=UUID=d1a29a63-27bc-4b4f-b455-9be750a1356e ro quiet splash vt.handoff=7 SourcePackage: xorg Symptom: display UpgradeStatus: Upgraded to zesty on 2017-04-14 (0 days ago) dmi.bios.date: 11/13/2015 dmi.bios.vendor: Dell Inc. dmi.bios.version: A13 dmi.board.name: 05R2TK dmi.board.vendor: Dell Inc. dmi.board.version: A00 dmi.chassis.type: 13 dmi.chassis.vendor: Dell Inc. dmi.chassis.version: 00 dmi.modalias: dmi:bvnDellInc.:bvrA13:bd11/13/2015:svnDellInc.:pnXPS2720:pvr00:rvnDellInc.:rn05R2TK:rvrA00:cvnDellInc.:ct13:cvr00: dmi.product.name: XPS 2720 dmi.product.version: 00 dmi.sys.vendor: Dell Inc. version.compiz: compiz 1:0.9.13.1+17.04.20170109-0ubuntu1 version.ia32-libs: ia32-libs N/A version.libdrm2: libdrm2 2.4.76-1 version.libgl1-mesa-dri: libgl1-mesa-dri 17.0.3-1ubuntu1 version.libgl1-mesa-dri-experimental: libgl1-mesa-dri-experimental N/A version.libgl1-mesa-glx: libgl1-mesa-glx 17.0.3-1ubuntu1 version.xserver-xorg-core: xserver-xorg-core 2:1.19.3-1ubuntu1 version.xserver-xorg-input-evdev: xserver-xorg-input-evdev 1:2.10.5-1ubuntu1 version.xserver-xorg-video-ati: xserver-xorg-video-ati 1:7.9.0-0ubuntu1 version.xserver-xorg-video-intel: xserver-xorg-video-intel 2:2.99.917+git20170309-0ubuntu1 version.xserver-xorg-video-nouveau: xserver-xorg-video-nouveau 1:1.0.14-0ubuntu1 xserver.bootTime: Fri Apr 14 18:53:04 2017 xserver.configfile: default xserver.errors: xserver.logfile: /var/log/Xorg.0.log xserver.version: 2:1.19.3-1ubuntu1 xserver.video_driver: modeset To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/xorg/+bug/1682883/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1821867] Re: network interface is down after post-install reboot of a default disco installation
** Description changed: + [Impact] + Minimal installs using netplan to configure the network. + + [Test case] + 1) Install Ubuntu minimal server / cloud image + 2) Edit /etc/netplan/01-netcfg.yaml to configure the network as necessary. + 3) Run 'sudo netplan apply'. Verify that the network comes up correctly. + 4) Reboot. + 5) Verify that the network comes up properly. + + [Regression potential] + Minimal; this reverts changes in a package that was never released to -updates, only available as SRU in -proposed and on the devel release. This only applies to the order in which systemd-networkd is enabled when used as a renderer for netplan configuration, to start in multi-user.target instead of the "correct", but inefficient "network-online.target" as the latter may not be depended upon in minimal installs. + + --- + After doing a default disco installation on s390x using the beta ISO image aka daily from March 26th and the post-install reboot the system restarts aka reipls (in z/VM in this case) but the interface is not brought up. Hence no remote connections are possible. The ip cmd shows: - ip a + ip a 1: lo: mtu 65536 qdisc noqueue state UNKNOWN group defaul - t qlen 1000 - link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00 - inet 127.0.0.1/8 scope host lo -valid_lft forever preferred_lft forever - inet6 ::1/128 scope host -valid_lft forever preferred_lft forever + t qlen 1000 + link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00 + inet 127.0.0.1/8 scope host lo + valid_lft forever preferred_lft forever + inet6 ::1/128 scope host + valid_lft forever preferred_lft forever 2: enc600: mtu 1500 qdisc noop state DOWN group default ql - en 1000 - link/ether 02:28:0b:00:00:15 brd ff:ff:ff:ff:ff:ff + en 1000 + link/ether 02:28:0b:00:00:15 brd ff:ff:ff:ff:ff:ff The netplan yaml file looks fine: - cat /etc/netplan/*.yaml + cat /etc/netplan/*.yaml # This file describes the network interfaces available on your system - # For more information, see netplan(5). - network: - version: 2 - renderer: networkd - ethernets: - enc600: - addresses: ¬ 10.245.236.27/24 | - gateway4: 10.245.236.1 - nameservers: - search: ¬ canonical.com | - addresses: - - "10.245.236.1" + # For more information, see netplan(5). + network: + version: 2 + renderer: networkd + ethernets: + enc600: + addresses: ¬ 10.245.236.27/24 | + gateway4: 10.245.236.1 + nameservers: + search: ¬ canonical.com | + addresses: + - "10.245.236.1" Using ip to bring the interface up doesn't help: buntu§hwe0007:ß$ sudo ip link set enc600 up sudo ip link set enc600 up ubuntu§hwe0007:ß$ ip addr show enc600 - ip addr show enc600 + ip addr show enc600 2: enc600: mtu 1500 qdisc fq_codel state UP gr - oup default qlen 1000 - link/ether 02:28:0b:00:00:15 brd ff:ff:ff:ff:ff:ff - inet6 fe80::28:bff:fe00:15/64 scope link -valid_lft forever preferred_lft forever + oup default qlen 1000 + link/ether 02:28:0b:00:00:15 brd ff:ff:ff:ff:ff:ff + inet6 fe80::28:bff:fe00:15/64 scope link + valid_lft forever preferred_lft forever ubuntu§hwe0007:ß$ But finally executing netplan apply does help: sudo netplan apply --dryrun - sudo netplan apply --dryrun + sudo netplan apply --dryrun ubuntu§hwe0007:ß$ sudo netplan apply - sudo netplan apply + sudo netplan apply ubuntu§hwe0007:ß$ ip addr show enc600 - ip addr show enc600 + ip addr show enc600 2: enc600: mtu 1500 qdisc fq_codel state UP gr - oup default qlen 1000 - link/ether 02:28:0b:00:00:15 brd ff:ff:ff:ff:ff:ff - inet 10.245.236.27/24 brd 10.245.236.255 scope global enc600 -valid_lft forever preferred_lft forever - inet6 fe80::28:bff:fe00:15/64 scope link -valid_lft forever preferred_lft forever - ubuntu§hwe0007:ß$ + oup default qlen 1000 + link/ether 02:28:0b:00:00:15 brd ff:ff:ff:ff:ff:ff + inet 10.245.236.27/24 brd 10.245.236.255 scope global enc600 + valid_lft forever preferred_lft forever + inet6 fe80::28:bff:fe00:15/64 scope link + valid_lft forever preferred_lft forever + ubuntu§hwe0007:ß$ (Sorry for the partly duplicate lines and some strange characters, but this is due to the fact that I copied the output from the console that requires a 3270 terminal emulation) ** Changed in: netplan.io (Ubuntu) Status: Triaged => In Progress -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to systemd in Ubuntu. https://bugs.launchpad.net/bugs/1821867 Title: network interface is down after post-install reboot of a default disco installation Status in Ubuntu on IBM z Systems: Triaged Status in netplan.io package in Ubuntu: In Progress Status
[Touch-packages] [Bug 1822184] [NEW] clear_console locks up video when X is running and you log out from a plain text console
Public bug reported: References: https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=810660 https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=866898 If X is running and you switch to a plain text console (ie ctrl-alt-f3), log in as a regular user, and then log out, the display switches back to the graphical login screen and locks up. The system is still functioning (can ssh in, etc) but the video output is frozen. The underlying cause is: https://gitlab.freedesktop.org/xorg/xserver/issues/492 However, the problem can at least be worked around by making clear_console switch to tty 6 and back instead of switching to 1 and back. This patch corrects the problem: --- bash-4.4.18.orig/debian/clear_console.c 2019-03-28 12:09:02.415907787 -0400 +++ bash-4.4.18/debian/clear_console.c 2019-03-28 12:08:11.984366858 -0400 @@ -205,7 +205,7 @@ #if defined(__linux__) num = vtstat.v_active; #endif - tmp_num = (num == 1 ? 2 : 1); + tmp_num = (num == 6 ? 5 : 6); /* switch vt to clear the scrollback buffer */ if (ioctl(fd, VT_ACTIVATE, tmp_num)) ** Affects: bash (Ubuntu) Importance: Undecided Status: New ** Patch added: "makes clear_console switch to either tty6 or tty5 instead of tty1/tty2" https://bugs.launchpad.net/bugs/1822184/+attachment/5250280/+files/fix-clear_console-GUI-lockup.patch -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to bash in Ubuntu. https://bugs.launchpad.net/bugs/1822184 Title: clear_console locks up video when X is running and you log out from a plain text console Status in bash package in Ubuntu: New Bug description: References: https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=810660 https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=866898 If X is running and you switch to a plain text console (ie ctrl-alt-f3), log in as a regular user, and then log out, the display switches back to the graphical login screen and locks up. The system is still functioning (can ssh in, etc) but the video output is frozen. The underlying cause is: https://gitlab.freedesktop.org/xorg/xserver/issues/492 However, the problem can at least be worked around by making clear_console switch to tty 6 and back instead of switching to 1 and back. This patch corrects the problem: --- bash-4.4.18.orig/debian/clear_console.c 2019-03-28 12:09:02.415907787 -0400 +++ bash-4.4.18/debian/clear_console.c 2019-03-28 12:08:11.984366858 -0400 @@ -205,7 +205,7 @@ #if defined(__linux__) num = vtstat.v_active; #endif - tmp_num = (num == 1 ? 2 : 1); + tmp_num = (num == 6 ? 5 : 6); /* switch vt to clear the scrollback buffer */ if (ioctl(fd, VT_ACTIVATE, tmp_num)) To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/bash/+bug/1822184/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1607845] Re: List of versioned kernels is not right for Ubuntu
In my linux-purge script (https://launchpad.net/linux-purge) I use extended regular expression '^linux-.+-[0-9]+\.[0-9]+\.' to match versioned kernel package names and it has worked so far. -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to apt in Ubuntu. https://bugs.launchpad.net/bugs/1607845 Title: List of versioned kernels is not right for Ubuntu Status in apt package in Ubuntu: In Progress Bug description: The following command outputs the list: $ apt-config dump --no-empty --format '%v%n' 'APT::VersionedKernelPackages' linux-image linux-headers linux-image-extra linux-signed-image kfreebsd-image kfreebsd-headers gnumach-image .*-modules .*-kernel linux-backports-modules-.* linux-tools but the list does not 'contain linux-.*-tools' and 'linux-goldfish- headers', which are versioned kernel packages as well, if I have understood correctly. On the other hand are these values appropriate for Ubuntu? kfreebsd-image kfreebsd-headers gnumach-image .*-modules .*-kernel Same thing for Ubuntu 14.04. ProblemType: Bug DistroRelease: Ubuntu 16.04 Package: apt 1.2.12~ubuntu16.04.1 ProcVersionSignature: Ubuntu 4.4.0-31.50-generic 4.4.13 Uname: Linux 4.4.0-31-generic x86_64 NonfreeKernelModules: nvidia_uvm nvidia ApportVersion: 2.20.1-0ubuntu2.1 Architecture: amd64 CurrentDesktop: XFCE Date: Fri Jul 29 18:55:50 2016 EcryptfsInUse: Yes InstallationDate: Installed on 2015-11-21 (250 days ago) InstallationMedia: Xubuntu 15.10 "Wily Werewolf" - Release amd64 (20151021) SourcePackage: apt UpgradeStatus: Upgraded to xenial on 2016-06-24 (35 days ago) To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/apt/+bug/1607845/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1821867] Re: network interface is down after post-install reboot of a default disco installation
Just as a side note - this also happens (like expected) with LPAR installations. I already did some earlier disco daily installations and cannot remember that I ran into this issue before which wonders me a bit ... -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to systemd in Ubuntu. https://bugs.launchpad.net/bugs/1821867 Title: network interface is down after post-install reboot of a default disco installation Status in Ubuntu on IBM z Systems: Triaged Status in netplan.io package in Ubuntu: Triaged Status in systemd package in Ubuntu: New Bug description: After doing a default disco installation on s390x using the beta ISO image aka daily from March 26th and the post-install reboot the system restarts aka reipls (in z/VM in this case) but the interface is not brought up. Hence no remote connections are possible. The ip cmd shows: ip a 1: lo: mtu 65536 qdisc noqueue state UNKNOWN group defaul t qlen 1000 link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00 inet 127.0.0.1/8 scope host lo valid_lft forever preferred_lft forever inet6 ::1/128 scope host valid_lft forever preferred_lft forever 2: enc600: mtu 1500 qdisc noop state DOWN group default ql en 1000 link/ether 02:28:0b:00:00:15 brd ff:ff:ff:ff:ff:ff The netplan yaml file looks fine: cat /etc/netplan/*.yaml # This file describes the network interfaces available on your system # For more information, see netplan(5). network: version: 2 renderer: networkd ethernets: enc600: addresses: ¬ 10.245.236.27/24 | gateway4: 10.245.236.1 nameservers: search: ¬ canonical.com | addresses: - "10.245.236.1" Using ip to bring the interface up doesn't help: buntu§hwe0007:ß$ sudo ip link set enc600 up sudo ip link set enc600 up ubuntu§hwe0007:ß$ ip addr show enc600 ip addr show enc600 2: enc600: mtu 1500 qdisc fq_codel state UP gr oup default qlen 1000 link/ether 02:28:0b:00:00:15 brd ff:ff:ff:ff:ff:ff inet6 fe80::28:bff:fe00:15/64 scope link valid_lft forever preferred_lft forever ubuntu§hwe0007:ß$ But finally executing netplan apply does help: sudo netplan apply --dryrun sudo netplan apply --dryrun ubuntu§hwe0007:ß$ sudo netplan apply sudo netplan apply ubuntu§hwe0007:ß$ ip addr show enc600 ip addr show enc600 2: enc600: mtu 1500 qdisc fq_codel state UP gr oup default qlen 1000 link/ether 02:28:0b:00:00:15 brd ff:ff:ff:ff:ff:ff inet 10.245.236.27/24 brd 10.245.236.255 scope global enc600 valid_lft forever preferred_lft forever inet6 fe80::28:bff:fe00:15/64 scope link valid_lft forever preferred_lft forever ubuntu§hwe0007:ß$ (Sorry for the partly duplicate lines and some strange characters, but this is due to the fact that I copied the output from the console that requires a 3270 terminal emulation) To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu-z-systems/+bug/1821867/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1820929] Re: netplan should consider adding more udev attribute for exact matching of failover 3-netdev interfaces
I also forgot to mention another entry I see in some of the configs: set-name: ens3 If you do not need to explicitly rename the interfaces yourself to a different name, I would avoid setting this at all. It *may* be being set automatically by cloud-init (if that's in use, but the configs provided do not look like generated configs from cloud-init). I'm curious to see how this behaves with the most simple netplan configuration possible; if you still see renaming issues in that case from the kernel -- as those would be renaming done completely outside of netplan and further direct our debugging to systemd-network / systemd- udev instead. In short; how much of the issues are you seeing when the only netplan config on the systems is /etc/netplan/01-netcfg.yaml (the one generated by debian-installer)? Judging from the original description, I'd say you still get renaming issues, specifically any new device with the MAC is attempted to be named "ens3" because of the udev rules: SUBSYSTEM=="net", ACTION=="add", DRIVERS=="?*", ATTR{address}=="ba:fb:9f:12:2f:02", NAME="ens3" This part should not vary whether there are statically assigned addresses or not; but it's also questionable whether or not it is useful to write it in the first place: systemd-udev should already be following ifnames policy to name the device appropriately (this should be true in all scenarios, this is only marginally useful for /renaming/ (when set- name: is specified) or setting MTU and such low-level options). Finally, could you please also provide us with the output of: sudo udevadm info /sys/class/net/ens4 (or rename4, depending on how it ends up being named). -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to systemd in Ubuntu. https://bugs.launchpad.net/bugs/1820929 Title: netplan should consider adding more udev attribute for exact matching of failover 3-netdev interfaces Status in netplan: Triaged Status in netplan.io package in Ubuntu: Triaged Status in systemd package in Ubuntu: Incomplete Bug description: This bug is a follow-up to https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1815268 after applying the 0001-net_failover-delay-taking-over-primary-device- to-acc.patch attached in that bug, the VF interface "eth0" is renamed to "rename4" instead of "ens4". Log is showing that attempt to rename "eth0" to "ens3" failed because of conflict with existing name, so that's why it ends up with rename4. vsbalakr@ubuntu-18:~$ uname -a Linux ubuntu-18 4.15.0-1009-oracle #11+lp1815268 SMP Tue Mar 12 15:20:15 UTC 2019 x86_64 x86_64 x86_64 GNU/Linux vsbalakr@ubuntu-18:~$ ip l 1: lo: mtu 65536 qdisc noqueue state UNKNOWN mode DEFAULT group default qlen 1000 link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00 2: ens3: mtu 1500 qdisc noqueue state UP mode DEFAULT group default qlen 1000 link/ether ba:fb:9f:12:2f:02 brd ff:ff:ff:ff:ff:ff 3: ens3nsby: mtu 1500 qdisc pfifo_fast master ens3 state UP mode DEFAULT group default qlen 1000 link/ether ba:fb:9f:12:2f:02 brd ff:ff:ff:ff:ff:ff 4: rename4: mtu 1500 qdisc mq master ens3 state UP mode DEFAULT group default qlen 1000 link/ether ba:fb:9f:12:2f:02 brd ff:ff:ff:ff:ff:ff vsbalakr@ubuntu-18:~$ egrep -i '(rename4|busy)' /var/log/syslog ... Mar 18 11:01:52 ubuntu-18 NetworkManager[1294]: [1552932112.9591] device (rename4): carrier: link connected Mar 18 11:01:52 ubuntu-18 NetworkManager[1294]: [1552932112.9591] device (rename4): enslaved to non-master-type device ens3; ignoring Mar 18 11:01:53 ubuntu-18 systemd-udevd[2463]: error changing net interface name 'eth0' to 'ens3': Device or resource busy Mar 18 11:01:53 ubuntu-18 systemd-udevd[2463]: could not rename interface '4' from 'eth0' to 'ens3': Device or resource busy Within VM there's netplan config as below: vsbalakr@ubuntu-18:~$ cat /etc/netplan/01-netcfg.yaml # This file describes the network interfaces available on your system # For more information, see netplan(5). network: version: 2 renderer: networkd ethernets: ens3: dhcp4: yes gateway4: 10.211.8.1 nameservers: addresses: [10.211.11.1,10.209.76.197] By running udevadm test, we can see the conflicting ens3 name comes from netplan's /run/udev/rules.d/99-netplan-ens3.rules vsbalakr@ubuntu-18:~$ cat /run/udev/rules.d/99-netplan-ens3.rules SUBSYSTEM=="net", ACTION=="add", DRIVERS=="?*", ATTR{address}=="ba:fb:9f:12:2f:02", NAME="ens3" vsbalakr@ubuntu-18:/lib/udev/rules.d$ udevadm test --action="add" /sys/class/net/eth0 calling: test version 237 This program is for debugging only, it does not run any program specified by a RUN key. It may show incorrect results, because some values may be different, or not available at a simulation run. Load module index Parsed configuration file /lib/systemd/network/99-default.link Parsed
[Touch-packages] [Bug 1607845] Re: List of versioned kernels is not right for Ubuntu
I meant linux-modules is excessive. -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to apt in Ubuntu. https://bugs.launchpad.net/bugs/1607845 Title: List of versioned kernels is not right for Ubuntu Status in apt package in Ubuntu: In Progress Bug description: The following command outputs the list: $ apt-config dump --no-empty --format '%v%n' 'APT::VersionedKernelPackages' linux-image linux-headers linux-image-extra linux-signed-image kfreebsd-image kfreebsd-headers gnumach-image .*-modules .*-kernel linux-backports-modules-.* linux-tools but the list does not 'contain linux-.*-tools' and 'linux-goldfish- headers', which are versioned kernel packages as well, if I have understood correctly. On the other hand are these values appropriate for Ubuntu? kfreebsd-image kfreebsd-headers gnumach-image .*-modules .*-kernel Same thing for Ubuntu 14.04. ProblemType: Bug DistroRelease: Ubuntu 16.04 Package: apt 1.2.12~ubuntu16.04.1 ProcVersionSignature: Ubuntu 4.4.0-31.50-generic 4.4.13 Uname: Linux 4.4.0-31-generic x86_64 NonfreeKernelModules: nvidia_uvm nvidia ApportVersion: 2.20.1-0ubuntu2.1 Architecture: amd64 CurrentDesktop: XFCE Date: Fri Jul 29 18:55:50 2016 EcryptfsInUse: Yes InstallationDate: Installed on 2015-11-21 (250 days ago) InstallationMedia: Xubuntu 15.10 "Wily Werewolf" - Release amd64 (20151021) SourcePackage: apt UpgradeStatus: Upgraded to xenial on 2016-06-24 (35 days ago) To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/apt/+bug/1607845/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1820929] Re: netplan should consider adding more udev attribute for exact matching of failover 3-netdev interfaces
All of these values should be coming directly from the netplan YAML. Are all of these options required? I see: match: macaddress: # Do you need to match the interface in this case? Is it sufficient to match by name if only ens3 is being configured? Also: dhcp-identifier: mac # This should only be required for clients who do not have control over their DHCP server, and thus can't use the DUID to set reservations and instead must use the MAC address to get a "static" IP from DHCP. I would recommend not setting this if it can be avoided. Also: critical: true # This is only required for systems booting off the network to reach their root filesystem. It will control whether the DHCP IP is released / regained when systemd-networkd restarts. Again, I would recommend not setting this if it's not required; DHCP leases lifetimes should ensure you will get the same address again. -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to systemd in Ubuntu. https://bugs.launchpad.net/bugs/1820929 Title: netplan should consider adding more udev attribute for exact matching of failover 3-netdev interfaces Status in netplan: Triaged Status in netplan.io package in Ubuntu: Triaged Status in systemd package in Ubuntu: Incomplete Bug description: This bug is a follow-up to https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1815268 after applying the 0001-net_failover-delay-taking-over-primary-device- to-acc.patch attached in that bug, the VF interface "eth0" is renamed to "rename4" instead of "ens4". Log is showing that attempt to rename "eth0" to "ens3" failed because of conflict with existing name, so that's why it ends up with rename4. vsbalakr@ubuntu-18:~$ uname -a Linux ubuntu-18 4.15.0-1009-oracle #11+lp1815268 SMP Tue Mar 12 15:20:15 UTC 2019 x86_64 x86_64 x86_64 GNU/Linux vsbalakr@ubuntu-18:~$ ip l 1: lo: mtu 65536 qdisc noqueue state UNKNOWN mode DEFAULT group default qlen 1000 link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00 2: ens3: mtu 1500 qdisc noqueue state UP mode DEFAULT group default qlen 1000 link/ether ba:fb:9f:12:2f:02 brd ff:ff:ff:ff:ff:ff 3: ens3nsby: mtu 1500 qdisc pfifo_fast master ens3 state UP mode DEFAULT group default qlen 1000 link/ether ba:fb:9f:12:2f:02 brd ff:ff:ff:ff:ff:ff 4: rename4: mtu 1500 qdisc mq master ens3 state UP mode DEFAULT group default qlen 1000 link/ether ba:fb:9f:12:2f:02 brd ff:ff:ff:ff:ff:ff vsbalakr@ubuntu-18:~$ egrep -i '(rename4|busy)' /var/log/syslog ... Mar 18 11:01:52 ubuntu-18 NetworkManager[1294]: [1552932112.9591] device (rename4): carrier: link connected Mar 18 11:01:52 ubuntu-18 NetworkManager[1294]: [1552932112.9591] device (rename4): enslaved to non-master-type device ens3; ignoring Mar 18 11:01:53 ubuntu-18 systemd-udevd[2463]: error changing net interface name 'eth0' to 'ens3': Device or resource busy Mar 18 11:01:53 ubuntu-18 systemd-udevd[2463]: could not rename interface '4' from 'eth0' to 'ens3': Device or resource busy Within VM there's netplan config as below: vsbalakr@ubuntu-18:~$ cat /etc/netplan/01-netcfg.yaml # This file describes the network interfaces available on your system # For more information, see netplan(5). network: version: 2 renderer: networkd ethernets: ens3: dhcp4: yes gateway4: 10.211.8.1 nameservers: addresses: [10.211.11.1,10.209.76.197] By running udevadm test, we can see the conflicting ens3 name comes from netplan's /run/udev/rules.d/99-netplan-ens3.rules vsbalakr@ubuntu-18:~$ cat /run/udev/rules.d/99-netplan-ens3.rules SUBSYSTEM=="net", ACTION=="add", DRIVERS=="?*", ATTR{address}=="ba:fb:9f:12:2f:02", NAME="ens3" vsbalakr@ubuntu-18:/lib/udev/rules.d$ udevadm test --action="add" /sys/class/net/eth0 calling: test version 237 This program is for debugging only, it does not run any program specified by a RUN key. It may show incorrect results, because some values may be different, or not available at a simulation run. Load module index Parsed configuration file /lib/systemd/network/99-default.link Parsed configuration file /run/systemd/network/10-netplan-ens3.link Created link configuration context. Reading rules file: /lib/udev/rules.d/01-md-raid-creating.rules .. Reading rules file: /lib/udev/rules.d/99-vmware-scsi-udev.rules rules contain 393216 bytes tokens (32768 * 12 bytes), 38638 bytes strings 25317 strings (216160 bytes), 21957 de-duplicated (180883 bytes), 3361 trie nodes used RUN '/lib/open-iscsi/net-interface-handler start' /lib/udev/rules.d/70-iscsi-network-interface.rules:2 IMPORT builtin 'net_id' /lib/udev/rules.d/75-net-description.rules:6 IMPORT builtin 'hwdb' /lib/udev/rules.d/75-net-description.rules:12 RUN 'ifupdown-hotplug' /lib/udev/rules.d/80-ifupdown.rules:5 IMPORT builtin 'path_id'
[Touch-packages] [Bug 1821867] Re: network interface is down after post-install reboot of a default disco installation
** Changed in: ubuntu-z-systems Status: New => Triaged -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to systemd in Ubuntu. https://bugs.launchpad.net/bugs/1821867 Title: network interface is down after post-install reboot of a default disco installation Status in Ubuntu on IBM z Systems: Triaged Status in netplan.io package in Ubuntu: Triaged Status in systemd package in Ubuntu: New Bug description: After doing a default disco installation on s390x using the beta ISO image aka daily from March 26th and the post-install reboot the system restarts aka reipls (in z/VM in this case) but the interface is not brought up. Hence no remote connections are possible. The ip cmd shows: ip a 1: lo: mtu 65536 qdisc noqueue state UNKNOWN group defaul t qlen 1000 link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00 inet 127.0.0.1/8 scope host lo valid_lft forever preferred_lft forever inet6 ::1/128 scope host valid_lft forever preferred_lft forever 2: enc600: mtu 1500 qdisc noop state DOWN group default ql en 1000 link/ether 02:28:0b:00:00:15 brd ff:ff:ff:ff:ff:ff The netplan yaml file looks fine: cat /etc/netplan/*.yaml # This file describes the network interfaces available on your system # For more information, see netplan(5). network: version: 2 renderer: networkd ethernets: enc600: addresses: ¬ 10.245.236.27/24 | gateway4: 10.245.236.1 nameservers: search: ¬ canonical.com | addresses: - "10.245.236.1" Using ip to bring the interface up doesn't help: buntu§hwe0007:ß$ sudo ip link set enc600 up sudo ip link set enc600 up ubuntu§hwe0007:ß$ ip addr show enc600 ip addr show enc600 2: enc600: mtu 1500 qdisc fq_codel state UP gr oup default qlen 1000 link/ether 02:28:0b:00:00:15 brd ff:ff:ff:ff:ff:ff inet6 fe80::28:bff:fe00:15/64 scope link valid_lft forever preferred_lft forever ubuntu§hwe0007:ß$ But finally executing netplan apply does help: sudo netplan apply --dryrun sudo netplan apply --dryrun ubuntu§hwe0007:ß$ sudo netplan apply sudo netplan apply ubuntu§hwe0007:ß$ ip addr show enc600 ip addr show enc600 2: enc600: mtu 1500 qdisc fq_codel state UP gr oup default qlen 1000 link/ether 02:28:0b:00:00:15 brd ff:ff:ff:ff:ff:ff inet 10.245.236.27/24 brd 10.245.236.255 scope global enc600 valid_lft forever preferred_lft forever inet6 fe80::28:bff:fe00:15/64 scope link valid_lft forever preferred_lft forever ubuntu§hwe0007:ß$ (Sorry for the partly duplicate lines and some strange characters, but this is due to the fact that I copied the output from the console that requires a 3270 terminal emulation) To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu-z-systems/+bug/1821867/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1763520] Re: after upgrade to bionic, printing fails without explanation / logs / debuggability
As soon as the patch is incorporated upstream I will post the resulting patch here. -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to gtk+3.0 in Ubuntu. https://bugs.launchpad.net/bugs/1763520 Title: after upgrade to bionic, printing fails without explanation / logs / debuggability Status in gtk+3.0 package in Ubuntu: In Progress Status in gtk+3.0 source package in Bionic: In Progress Status in gtk+3.0 source package in Cosmic: In Progress Bug description: [Impact] The problem occurs when the printer's driver package is updated and with this the PPD is replaced and one of the default settings of the queue is not available any more in the new PPD file. Then the setting is prefixed with "Custom." and with this the jobs fail. See comment #15 for more info. [Test Case] - Create a print queue with a PPD. - evince an arbitrary PDF file - Click the print icon - In the print dialog choose the newly created queue and choose some uncommon paper size (not custom). Click "Print". - Check /var/log/cups/error_log, the page size gets correctly received. - Close evince. - Stop CUPS, edit the PPD file removing the paper size you have selected for your job in the PageSize, PageRegion, PaperDimension, and ImageableArea lines. - Start CUPS. - Open the same PDF file again with evince, click Print and then select "Print" in the print dialog without changing anything. - The job fails, in /var/log/cups/error_log you see that the page size is prefixed with "Custom.". With the fixed package installed the job will print. [Regression Potential] The change applies only to saved settings of the print dialog not matching with any of the settings available in the PPD file. In rare cases the fix could fail by mis-understanding the setting and this way not being effective. For options which do not support setting custom values (the vast majority) the patch should always prevent a job failure though. [Other Info] Complete info about the bug and the fix in comment #15, Original bug description: I am unable to print to my network-attached printer after upgrade to bionic. ps shows: lp 26047 0.0 0.0 91668 5756 ?S15:06 0:00 \_ HP-ENVY-4500-new 473 vorlon USCIS Form I-9 1 print-content-optimize=auto print-rendering-intent=auto cupsPrintQuality=4 number-up=1 MediaType=Stationery noCollate print-scaling=auto PageSize=Custom.Letter.SM ColorModel=RGB Duplex=DuplexNoTumble job-uuid=urn:uuid:08c937ec-ccb6-3ff1-6ed4-212128e4257b job-originating-host-name=localhost date-time-at-creation= date-time-at-processing= time-at-creation=1523570792 time-at-processing=1523570792 print-quality=4 lp 26050 0.1 0.0 0 0 ?Z15:06 0:00 | \_ [gs] lp 26048 0.0 0.0 79908 3836 ?S15:06 0:00 \_ HP-ENVY-4500-new 473 vorlon USCIS Form I-9 1 print-content-optimize=auto print-rendering-intent=auto cupsPrintQuality=4 number-up=1 MediaType=Stationery noCollate print-scaling=auto PageSize=Custom.Letter.SM ColorModel=RGB Duplex=DuplexNoTumble job-uuid=urn:uuid:08c937ec-ccb6-3ff1-6ed4-212128e4257b job-originating-host-name=localhost date-time-at-creation= date-time-at-processing= time-at-creation=1523570792 time-at-processing=1523570792 print-quality=4 root 26049 0.0 0.0 84388 6192 ?S15:06 0:00 \_ ipp://HP645106EA160E.local:631/ipp/print 473 vorlon USCIS Form I-9 1 print-content-optimize=auto print-rendering-intent=auto cupsPrintQuality=4 number-up=1 MediaType=Stationery noCollate print-scaling=auto PageSize=Custom.Letter.SM ColorModel=RGB Duplex=DuplexNoTumble job-uuid=urn:uuid:08c937ec-ccb6-3ff1-6ed4-212128e4257b job-originating-host-name=localhost date-time-at-creation= date-time-at-processing= time-at-creation=1523570792 time-at-processing=1523570792 print-quality=4 Note the un-reaped gs process. ProblemType: Bug DistroRelease: Ubuntu 18.04 Package: cups 2.2.7-1ubuntu2 ProcVersionSignature: Ubuntu 4.15.0-13.14-generic 4.15.10 Uname: Linux 4.15.0-13-generic x86_64 NonfreeKernelModules: zfs zunicode zavl icp zcommon znvpair ApportVersion: 2.20.9-0ubuntu4 Architecture: amd64 CurrentDesktop: ubuntu:GNOME Date: Thu Apr 12 15:07:49 2018 InstallationDate: Installed on 2010-09-24 (2757 days ago) InstallationMedia: Ubuntu 10.04.1 LTS "Lucid Lynx" - Release amd64 (20100816.1) MachineType: LENOVO 2306CTO Papersize: letter ProcKernelCmdLine: BOOT_IMAGE=/vmlinuz-4.15.0-13-generic.efi.signed root=/dev/mapper/hostname-root ro quiet splash vt.handoff=1 SourcePackage: cups UpgradeStatus: Upgraded to bionic on 2018-03-21 (21 days ago) dmi.bios.date: 10/25/2013 dmi.bios.vendor: LENOVO dmi.bios.version: G2ET97WW (2.57 ) dmi.board.asset.tag: Not Available dmi.board.name: 2306CTO dmi.board.vendor: LENOVO dmi.board.version: Not Defined
[Touch-packages] [Bug 1763520] Re: after upgrade to bionic, printing fails without explanation / logs / debuggability
Updated the proposed patch for upstream according to their requirements. -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to gtk+3.0 in Ubuntu. https://bugs.launchpad.net/bugs/1763520 Title: after upgrade to bionic, printing fails without explanation / logs / debuggability Status in gtk+3.0 package in Ubuntu: In Progress Status in gtk+3.0 source package in Bionic: In Progress Status in gtk+3.0 source package in Cosmic: In Progress Bug description: [Impact] The problem occurs when the printer's driver package is updated and with this the PPD is replaced and one of the default settings of the queue is not available any more in the new PPD file. Then the setting is prefixed with "Custom." and with this the jobs fail. See comment #15 for more info. [Test Case] - Create a print queue with a PPD. - evince an arbitrary PDF file - Click the print icon - In the print dialog choose the newly created queue and choose some uncommon paper size (not custom). Click "Print". - Check /var/log/cups/error_log, the page size gets correctly received. - Close evince. - Stop CUPS, edit the PPD file removing the paper size you have selected for your job in the PageSize, PageRegion, PaperDimension, and ImageableArea lines. - Start CUPS. - Open the same PDF file again with evince, click Print and then select "Print" in the print dialog without changing anything. - The job fails, in /var/log/cups/error_log you see that the page size is prefixed with "Custom.". With the fixed package installed the job will print. [Regression Potential] The change applies only to saved settings of the print dialog not matching with any of the settings available in the PPD file. In rare cases the fix could fail by mis-understanding the setting and this way not being effective. For options which do not support setting custom values (the vast majority) the patch should always prevent a job failure though. [Other Info] Complete info about the bug and the fix in comment #15, Original bug description: I am unable to print to my network-attached printer after upgrade to bionic. ps shows: lp 26047 0.0 0.0 91668 5756 ?S15:06 0:00 \_ HP-ENVY-4500-new 473 vorlon USCIS Form I-9 1 print-content-optimize=auto print-rendering-intent=auto cupsPrintQuality=4 number-up=1 MediaType=Stationery noCollate print-scaling=auto PageSize=Custom.Letter.SM ColorModel=RGB Duplex=DuplexNoTumble job-uuid=urn:uuid:08c937ec-ccb6-3ff1-6ed4-212128e4257b job-originating-host-name=localhost date-time-at-creation= date-time-at-processing= time-at-creation=1523570792 time-at-processing=1523570792 print-quality=4 lp 26050 0.1 0.0 0 0 ?Z15:06 0:00 | \_ [gs] lp 26048 0.0 0.0 79908 3836 ?S15:06 0:00 \_ HP-ENVY-4500-new 473 vorlon USCIS Form I-9 1 print-content-optimize=auto print-rendering-intent=auto cupsPrintQuality=4 number-up=1 MediaType=Stationery noCollate print-scaling=auto PageSize=Custom.Letter.SM ColorModel=RGB Duplex=DuplexNoTumble job-uuid=urn:uuid:08c937ec-ccb6-3ff1-6ed4-212128e4257b job-originating-host-name=localhost date-time-at-creation= date-time-at-processing= time-at-creation=1523570792 time-at-processing=1523570792 print-quality=4 root 26049 0.0 0.0 84388 6192 ?S15:06 0:00 \_ ipp://HP645106EA160E.local:631/ipp/print 473 vorlon USCIS Form I-9 1 print-content-optimize=auto print-rendering-intent=auto cupsPrintQuality=4 number-up=1 MediaType=Stationery noCollate print-scaling=auto PageSize=Custom.Letter.SM ColorModel=RGB Duplex=DuplexNoTumble job-uuid=urn:uuid:08c937ec-ccb6-3ff1-6ed4-212128e4257b job-originating-host-name=localhost date-time-at-creation= date-time-at-processing= time-at-creation=1523570792 time-at-processing=1523570792 print-quality=4 Note the un-reaped gs process. ProblemType: Bug DistroRelease: Ubuntu 18.04 Package: cups 2.2.7-1ubuntu2 ProcVersionSignature: Ubuntu 4.15.0-13.14-generic 4.15.10 Uname: Linux 4.15.0-13-generic x86_64 NonfreeKernelModules: zfs zunicode zavl icp zcommon znvpair ApportVersion: 2.20.9-0ubuntu4 Architecture: amd64 CurrentDesktop: ubuntu:GNOME Date: Thu Apr 12 15:07:49 2018 InstallationDate: Installed on 2010-09-24 (2757 days ago) InstallationMedia: Ubuntu 10.04.1 LTS "Lucid Lynx" - Release amd64 (20100816.1) MachineType: LENOVO 2306CTO Papersize: letter ProcKernelCmdLine: BOOT_IMAGE=/vmlinuz-4.15.0-13-generic.efi.signed root=/dev/mapper/hostname-root ro quiet splash vt.handoff=1 SourcePackage: cups UpgradeStatus: Upgraded to bionic on 2018-03-21 (21 days ago) dmi.bios.date: 10/25/2013 dmi.bios.vendor: LENOVO dmi.bios.version: G2ET97WW (2.57 ) dmi.board.asset.tag: Not Available dmi.board.name: 2306CTO dmi.board.vendor: LENOVO dmi.board.version: Not Defined dmi.chassis.asset.tag: No
[Touch-packages] [Bug 1822085] Re: Often the VGA screen stops working after screen saver was on
try linux-oem -1035 from bionic-proposed, it has ~50 commits backported from 5.0 to i915 driver which should help with these issues ** Description changed: I have two connected external monitors. They are connected through a Dell Dock W15. One is connected with VGA, the other with DP. Sometimes the VGA monitor complains about the resolution and will not work after the screen saver has been active (and putting the monitors to sleep). When shutting down the system, it then hangs and I have to force a shutdown with the power button. There seems to be a kernel crash before as seen in the dmesg log. + + + ProblemType: Bug + DistroRelease: Ubuntu 18.04 + Package: xorg 1:7.7+19ubuntu7.1 + ProcVersionSignature: Ubuntu 4.15.0-1034.39-oem 4.15.18 + Uname: Linux 4.15.0-1034-oem x86_64 + ApportVersion: 2.20.9-0ubuntu7.6 + Architecture: amd64 + BootLog: Error: [Errno 13] Åtkomst nekas: '/var/log/boot.log' + CompositorRunning: None + CurrentDesktop: ubuntu:GNOME + Date: Thu Mar 28 12:04:07 2019 + DistUpgraded: Fresh install + DistributionChannelDescriptor: + # This is the distribution channel descriptor for the OEM CDs + # For more information see http://wiki.ubuntu.com/DistributionChannelDescriptor + canonical-oem-somerville-bionic-amd64-20180608-47+italia-whl+X31 + DistroCodename: bionic + DistroVariant: ubuntu + DkmsStatus: virtualbox, 5.2.18, 4.15.0-1034-oem, x86_64: installed + ExtraDebuggingInterest: Yes + GraphicsCard: + Intel Corporation Device [8086:3ea0] (prog-if 00 [VGA controller]) +Subsystem: Dell Device [1028:08af] + InstallationDate: Installed on 2019-02-12 (44 days ago) + InstallationMedia: Ubuntu 18.04 "Bionic" - Build amd64 LIVE Binary 20180608-09:38 + MachineType: Dell Inc. XPS 13 9380 + ProcEnviron: + LANG=sv_SE.UTF-8 + SHELL=/bin/bash + TERM=xterm-256color + XDG_RUNTIME_DIR= + PATH=(custom, no user) + ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-4.15.0-1034-oem root=UUID=0b807479-b451-4f56-b9cc-307300b68200 ro quiet splash vt.handoff=1 + SourcePackage: xorg + Symptom: display + UpgradeStatus: No upgrade log present (probably fresh install) + dmi.bios.date: 02/14/2019 + dmi.bios.vendor: Dell Inc. + dmi.bios.version: 1.2.1 + dmi.board.name: 0KTDY6 + dmi.board.vendor: Dell Inc. + dmi.board.version: A00 + dmi.chassis.type: 10 + dmi.chassis.vendor: Dell Inc. + dmi.modalias: dmi:bvnDellInc.:bvr1.2.1:bd02/14/2019:svnDellInc.:pnXPS139380:pvr:rvnDellInc.:rn0KTDY6:rvrA00:cvnDellInc.:ct10:cvr: + dmi.product.family: XPS + dmi.product.name: XPS 13 9380 + dmi.sys.vendor: Dell Inc. + version.compiz: compiz N/A + version.libdrm2: libdrm2 2.4.95-1~18.04.1 + version.libgl1-mesa-dri: libgl1-mesa-dri 18.2.8-0ubuntu0~18.04.2 + version.libgl1-mesa-glx: libgl1-mesa-glx 18.2.8-0ubuntu0~18.04.2 + version.xserver-xorg-core: xserver-xorg-core 2:1.19.6-1ubuntu4.2 + version.xserver-xorg-input-evdev: xserver-xorg-input-evdev N/A + version.xserver-xorg-video-ati: xserver-xorg-video-ati 1:18.0.1-1 + version.xserver-xorg-video-intel: xserver-xorg-video-intel 2:2.99.917+git20171229-1 + version.xserver-xorg-video-nouveau: xserver-xorg-video-nouveau 1:1.0.15-2 ** Package changed: xorg (Ubuntu) => linux-oem (Ubuntu) ** Changed in: linux-oem (Ubuntu) Status: New => Incomplete -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to xorg in Ubuntu. https://bugs.launchpad.net/bugs/1822085 Title: Often the VGA screen stops working after screen saver was on Status in linux-oem package in Ubuntu: Incomplete Bug description: I have two connected external monitors. They are connected through a Dell Dock W15. One is connected with VGA, the other with DP. Sometimes the VGA monitor complains about the resolution and will not work after the screen saver has been active (and putting the monitors to sleep). When shutting down the system, it then hangs and I have to force a shutdown with the power button. There seems to be a kernel crash before as seen in the dmesg log. ProblemType: Bug DistroRelease: Ubuntu 18.04 Package: xorg 1:7.7+19ubuntu7.1 ProcVersionSignature: Ubuntu 4.15.0-1034.39-oem 4.15.18 Uname: Linux 4.15.0-1034-oem x86_64 ApportVersion: 2.20.9-0ubuntu7.6 Architecture: amd64 BootLog: Error: [Errno 13] Åtkomst nekas: '/var/log/boot.log' CompositorRunning: None CurrentDesktop: ubuntu:GNOME Date: Thu Mar 28 12:04:07 2019 DistUpgraded: Fresh install DistributionChannelDescriptor: # This is the distribution channel descriptor for the OEM CDs # For more information see http://wiki.ubuntu.com/DistributionChannelDescriptor canonical-oem-somerville-bionic-amd64-20180608-47+italia-whl+X31 DistroCodename: bionic DistroVariant: ubuntu DkmsStatus: virtualbox, 5.2.18, 4.15.0-1034-oem, x86_64: installed ExtraDebuggingInterest: Yes GraphicsCard: Intel Corporation Device [8086:3ea0] (prog-if 00 [VGA controller]) Subsystem: Dell Device [1028:08af] InstallationDate:
[Touch-packages] [Bug 1607845] Re: List of versioned kernels is not right for Ubuntu
Balint, I do not understand what you mean by that this bug covers very old packages vs. the other covers current ones. Patterns linux-modules linux-modules-extra linux-modules-.* linux-cloud-tools have been added to APT::VersionedKernelPackages after reporting this bug. linux-modules is not excessive as '.*-modules' already covers that. -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to apt in Ubuntu. https://bugs.launchpad.net/bugs/1607845 Title: List of versioned kernels is not right for Ubuntu Status in apt package in Ubuntu: In Progress Bug description: The following command outputs the list: $ apt-config dump --no-empty --format '%v%n' 'APT::VersionedKernelPackages' linux-image linux-headers linux-image-extra linux-signed-image kfreebsd-image kfreebsd-headers gnumach-image .*-modules .*-kernel linux-backports-modules-.* linux-tools but the list does not 'contain linux-.*-tools' and 'linux-goldfish- headers', which are versioned kernel packages as well, if I have understood correctly. On the other hand are these values appropriate for Ubuntu? kfreebsd-image kfreebsd-headers gnumach-image .*-modules .*-kernel Same thing for Ubuntu 14.04. ProblemType: Bug DistroRelease: Ubuntu 16.04 Package: apt 1.2.12~ubuntu16.04.1 ProcVersionSignature: Ubuntu 4.4.0-31.50-generic 4.4.13 Uname: Linux 4.4.0-31-generic x86_64 NonfreeKernelModules: nvidia_uvm nvidia ApportVersion: 2.20.1-0ubuntu2.1 Architecture: amd64 CurrentDesktop: XFCE Date: Fri Jul 29 18:55:50 2016 EcryptfsInUse: Yes InstallationDate: Installed on 2015-11-21 (250 days ago) InstallationMedia: Xubuntu 15.10 "Wily Werewolf" - Release amd64 (20151021) SourcePackage: apt UpgradeStatus: Upgraded to xenial on 2016-06-24 (35 days ago) To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/apt/+bug/1607845/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1822047] Re: After install, cannot boot into system unless I use nomodeset kernel parameter
*** This bug is a duplicate of bug 1822026 *** https://bugs.launchpad.net/bugs/1822026 ** This bug has been marked a duplicate of bug 1822026 Live USB freezes or cannot complete install when nouveau driver is loaded -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to xorg in Ubuntu. https://bugs.launchpad.net/bugs/1822047 Title: After install, cannot boot into system unless I use nomodeset kernel parameter Status in xorg package in Ubuntu: Incomplete Bug description: System: Disco (19.04 beta) Hardware: Dell Precision 7530 After installing the system, it cannot start unless manually adding `nomodeset` in the kernel command line at boot time. Steps to reproduce: 1. Install disco 19.04 beta on the device. Leave all the options at default values (i.e. do not install third party drivers) 2. Once installation is finished, restart the system (the system will freeze after install is finished, it's a known issue -> lp:1822044) Expected result: 2. The system boots and user can log in and see Gnome interface. Actual result: 2. The first time, I could log into the system. However, when I tried to access the Settings screen, the system froze. After that, everytime I tried to boot the device, the screen was filled with dark purple, a mouse cursor may appear, but nothing else would happen. At that stage, the only thing I could do was to force shutdown the device, start it again and at Grub screen, press `e` to edit the kernel parameters and add `nomodeset`. This bug is created from the actual device, using `nomodeset` kernel parameter. `nouveau` graphics driver is most likely the culprit, like in all the previous issues that have been raised (see lp:1822026, lp:1822044, lp:1821882) Two workarounds exist: 1. After installation, use `nomodeset` kernel parameter to boot into the system, then install proprietary nvidia drivers. 2. During installation, install third party drivers. If Secure Boot is enabled, this requires to set a password that will be asked when the device reboots. ProblemType: Bug DistroRelease: Ubuntu 19.04 Package: xorg 1:7.7+19ubuntu12 ProcVersionSignature: Ubuntu 5.0.0-7.8-generic 5.0.0 Uname: Linux 5.0.0-7-generic x86_64 ApportVersion: 2.20.10-0ubuntu23 Architecture: amd64 BootLog: Error: [Errno 13] Permission denied: '/var/log/boot.log' CompositorRunning: None CurrentDesktop: ubuntu:GNOME Date: Thu Mar 28 15:39:40 2019 DistUpgraded: Fresh install DistroCodename: disco DistroVariant: ubuntu ExtraDebuggingInterest: Yes GraphicsCard: Intel Corporation UHD Graphics 630 (Mobile) [8086:3e9b] (prog-if 00 [VGA controller]) Subsystem: Dell UHD Graphics 630 (Mobile) [1028:0889] NVIDIA Corporation GP107GLM [Quadro P1000 Mobile] [10de:1cbb] (rev a1) (prog-if 00 [VGA controller]) Subsystem: Dell GP107GLM [Quadro P1000 Mobile] [1028:0889] InstallationDate: Installed on 2019-03-28 (0 days ago) InstallationMedia: Ubuntu 19.04 "Disco Dingo" - Alpha amd64 (20190326.2) MachineType: Dell Inc. Precision 7530 ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-5.0.0-7-generic root=UUID=e07663b1-0b3d-4cdb-aa6c-f6f2e8c4ee5d ro quiet splash nomodeset vt.handoff=1 SourcePackage: xorg UpgradeStatus: No upgrade log present (probably fresh install) dmi.bios.date: 02/19/2019 dmi.bios.vendor: Dell Inc. dmi.bios.version: 1.7.0 dmi.board.vendor: Dell Inc. dmi.chassis.type: 10 dmi.chassis.vendor: Dell Inc. dmi.modalias: dmi:bvnDellInc.:bvr1.7.0:bd02/19/2019:svnDellInc.:pnPrecision7530:pvr:rvnDellInc.:rn:rvr:cvnDellInc.:ct10:cvr: dmi.product.family: Precision dmi.product.name: Precision 7530 dmi.product.sku: 0889 dmi.sys.vendor: Dell Inc. version.compiz: compiz N/A version.libdrm2: libdrm2 2.4.97-1 version.libgl1-mesa-dri: libgl1-mesa-dri 19.0.0-1ubuntu1 version.libgl1-mesa-glx: libgl1-mesa-glx N/A version.xserver-xorg-core: xserver-xorg-core 2:1.20.4-1ubuntu2 version.xserver-xorg-input-evdev: xserver-xorg-input-evdev N/A version.xserver-xorg-video-ati: xserver-xorg-video-ati 1:19.0.0-1 version.xserver-xorg-video-intel: xserver-xorg-video-intel 2:2.99.917+git20180925-2 version.xserver-xorg-video-nouveau: xserver-xorg-video-nouveau 1:1.0.16-1 To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/xorg/+bug/1822047/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1821867] Re: network interface is down after post-install reboot of a default disco installation
This seems quite likely to be an issue with netplan; I've had a similar report on UC18; where systemd-networkd isn't started. Turns out netplan moved the enablement of systemd-netwrokd to network- online.target; but unfortunately there may be no service or target depending on that. I'll revert the change to put systemd-networkd back under multi-user.target. ** Also affects: netplan.io (Ubuntu) Importance: Undecided Status: New ** Changed in: netplan.io (Ubuntu) Status: New => Triaged ** Changed in: netplan.io (Ubuntu) Importance: Undecided => Critical ** Changed in: netplan.io (Ubuntu) Assignee: (unassigned) => Mathieu Trudel-Lapierre (cyphermox) -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to systemd in Ubuntu. https://bugs.launchpad.net/bugs/1821867 Title: network interface is down after post-install reboot of a default disco installation Status in Ubuntu on IBM z Systems: New Status in netplan.io package in Ubuntu: Triaged Status in systemd package in Ubuntu: New Bug description: After doing a default disco installation on s390x using the beta ISO image aka daily from March 26th and the post-install reboot the system restarts aka reipls (in z/VM in this case) but the interface is not brought up. Hence no remote connections are possible. The ip cmd shows: ip a 1: lo: mtu 65536 qdisc noqueue state UNKNOWN group defaul t qlen 1000 link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00 inet 127.0.0.1/8 scope host lo valid_lft forever preferred_lft forever inet6 ::1/128 scope host valid_lft forever preferred_lft forever 2: enc600: mtu 1500 qdisc noop state DOWN group default ql en 1000 link/ether 02:28:0b:00:00:15 brd ff:ff:ff:ff:ff:ff The netplan yaml file looks fine: cat /etc/netplan/*.yaml # This file describes the network interfaces available on your system # For more information, see netplan(5). network: version: 2 renderer: networkd ethernets: enc600: addresses: ¬ 10.245.236.27/24 | gateway4: 10.245.236.1 nameservers: search: ¬ canonical.com | addresses: - "10.245.236.1" Using ip to bring the interface up doesn't help: buntu§hwe0007:ß$ sudo ip link set enc600 up sudo ip link set enc600 up ubuntu§hwe0007:ß$ ip addr show enc600 ip addr show enc600 2: enc600: mtu 1500 qdisc fq_codel state UP gr oup default qlen 1000 link/ether 02:28:0b:00:00:15 brd ff:ff:ff:ff:ff:ff inet6 fe80::28:bff:fe00:15/64 scope link valid_lft forever preferred_lft forever ubuntu§hwe0007:ß$ But finally executing netplan apply does help: sudo netplan apply --dryrun sudo netplan apply --dryrun ubuntu§hwe0007:ß$ sudo netplan apply sudo netplan apply ubuntu§hwe0007:ß$ ip addr show enc600 ip addr show enc600 2: enc600: mtu 1500 qdisc fq_codel state UP gr oup default qlen 1000 link/ether 02:28:0b:00:00:15 brd ff:ff:ff:ff:ff:ff inet 10.245.236.27/24 brd 10.245.236.255 scope global enc600 valid_lft forever preferred_lft forever inet6 fe80::28:bff:fe00:15/64 scope link valid_lft forever preferred_lft forever ubuntu§hwe0007:ß$ (Sorry for the partly duplicate lines and some strange characters, but this is due to the fact that I copied the output from the console that requires a 3270 terminal emulation) To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu-z-systems/+bug/1821867/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1821936] Re: ALC274 unsupported
Please run `apport-collect 1821936` to collect log. -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to alsa-driver in Ubuntu. https://bugs.launchpad.net/bugs/1821936 Title: ALC274 unsupported Status in alsa-driver package in Ubuntu: Incomplete Status in linux package in Ubuntu: Incomplete Bug description: I find this to be an issue with current LTS 18.04's latest 4.19 kernel. I tested this on mainline 4.20 and 5.0 kernels as well. No audio because ALC274 not properly loaded for use, so no audio output. A related card had a similar bug, which was fixed, and may be of use in resolving this one: https://bugs.launchpad.net/ubuntu/+source/alsa-driver/+bug/1784485 # cat /proc/asound/card0/codec* | grep Codec Codec: Realtek ALC274 Codec: Intel Kabylake HDMI # cat /proc/asound/card0/pcm0c/info card: 0 device: 0 subdevice: 0 stream: CAPTURE id: ALC274 Analog name: ALC274 Analog subname: subdevice #0 class: 0 subclass: 0 subdevices_count: 1 subdevices_avail: 0 aplay -l List of PLAYBACK Hardware Devices card 0: PCH [HDA Intel PCH], device 0: ALC274 Analog [ALC274 Analog] Subdevices: 1/1 Subdevice #0: subdevice #0 card 0: PCH [HDA Intel PCH], device 3: HDMI 0 [HDMI 0] Subdevices: 1/1 Subdevice #0: subdevice #0 card 0: PCH [HDA Intel PCH], device 7: HDMI 1 [HDMI 1] Subdevices: 1/1 Subdevice #0: subdevice #0 card 0: PCH [HDA Intel PCH], device 8: HDMI 2 [HDMI 2] Subdevices: 1/1 Subdevice #0: subdevice #0 card 0: PCH [HDA Intel PCH], device 9: HDMI 3 [HDMI 3] Subdevices: 1/1 Subdevice #0: subdevice #0 card 0: PCH [HDA Intel PCH], device 10: HDMI 4 [HDMI 4] Subdevices: 1/1 Subdevice #0: subdevice #0 d# hwinfo --sound 21: PCI 1f.3: 0403 Audio device [Created at pci.378] Unique ID: nS1_.WnojYJLVCm0 SysFS ID: /devices/pci:00/:00:1f.3 SysFS BusID: :00:1f.3 Hardware Class: sound Model: "Intel Audio device" Vendor: pci 0x8086 "Intel Corporation" Device: pci 0xa348 SubVendor: pci 0x1043 "ASUSTeK Computer Inc." SubDevice: pci 0x31d0 Revision: 0x10 Driver: "snd_hda_intel" Driver Modules: "snd_hda_intel" Memory Range: 0xdd398000-0xdd39bfff (rw,non-prefetchable) Memory Range: 0xdd10-0xdd1f (rw,non-prefetchable) IRQ: 145 (663 events) Module Alias: "pci:v8086dA348sv1043sd31D0bc04sc03i80" Driver Info #0: Driver Status: snd_hda_intel is active Driver Activation Cmd: "modprobe snd_hda_intel" Config Status: cfg=new, avail=yes, need=no, active=unknown To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/alsa-driver/+bug/1821936/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1822092] Re: FFe: Mesa 19.0.1 for disco
** Tags added: upgrade-software-version -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to mesa in Ubuntu. https://bugs.launchpad.net/bugs/1822092 Title: FFe: Mesa 19.0.1 for disco Status in mesa package in Ubuntu: New Bug description: Mesa 19.0.1 is a bug fix release which fixes bugs found since the 19.0.0 release. Mesa 19.0.1 implements the OpenGL 4.5 API, but the version reported by glGetString(GL_VERSION) or glGetIntegerv(GL_MAJOR_VERSION) / glGetIntegerv(GL_MINOR_VERSION) depends on the particular driver being used. Some drivers don't support all the features required in OpenGL 4.5. OpenGL 4.5 is only available if requested at context creation. Compatibility contexts may report a lower version depending on each driver. https://www.mesa3d.org/relnotes/19.0.1.html To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/mesa/+bug/1822092/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1818204] Re: Qualcomm Atheros QCA9377 wireless does not work
Thanks. Closed network-manager tasks. ** Changed in: network-manager (Ubuntu Bionic) Status: New => Invalid ** Changed in: network-manager (Ubuntu Cosmic) Status: New => Invalid -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to network-manager in Ubuntu. https://bugs.launchpad.net/bugs/1818204 Title: Qualcomm Atheros QCA9377 wireless does not work Status in linux package in Ubuntu: Fix Committed Status in network-manager package in Ubuntu: Invalid Status in linux source package in Bionic: Fix Committed Status in network-manager source package in Bionic: Invalid Status in linux source package in Cosmic: Fix Committed Status in network-manager source package in Cosmic: Invalid Bug description: === SRU Justification === [Impact] Lenovo ideapad 530S-14ARR Wifi rfkill hard blocked [Fix] The platform in question doesn't have hardware RF switch, so quirk it off. [Test] User confirm it fixes the issue. [Regression Potential] Minimal. This fix is limited to one specific platform. === Original Bug Report === I have Lenovo 530s laptop with Qualcomm Atheros QCA9377 802.11ac Wireless Network Adapter (rev 31). The menu shows that wireless is off. Turning on the wireless from the menu does not do anything. ProblemType: Bug DistroRelease: Ubuntu 18.04 Package: network-manager 1.10.6-2ubuntu1.1 ProcVersionSignature: Ubuntu 4.18.0-15.16~18.04.1-generic 4.18.20 Uname: Linux 4.18.0-15-generic x86_64 ApportVersion: 2.20.9-0ubuntu7.5 Architecture: amd64 CurrentDesktop: ubuntu:GNOME Date: Fri Mar 1 11:42:34 2019 IfupdownConfig: # interfaces(5) file used by ifup(8) and ifdown(8) auto lo iface lo inet loopback InstallationDate: Installed on 2019-02-20 (8 days ago) InstallationMedia: Ubuntu 18.04.2 LTS "Bionic Beaver" - Release amd64 (20190210) IpRoute: default via 130.232.69.254 dev enx00e04c704f68 proto dhcp metric 100 130.232.69.0/24 dev enx00e04c704f68 proto kernel scope link src 130.232.69.176 metric 100 169.254.0.0/16 dev virbr0 scope link metric 1000 linkdown 192.168.122.0/24 dev virbr0 proto kernel scope link src 192.168.122.1 linkdown NetworkManager.state: [main] NetworkingEnabled=true WirelessEnabled=true WWANEnabled=true SourcePackage: network-manager UpgradeStatus: No upgrade log present (probably fresh install) nmcli-con: NAMEUUID TYPE TIMESTAMP TIMESTAMP-REALAUTOCONNECT AUTOCONNECT-PRIORITY READONLY DBUS-PATH ACTIVE DEVICE STATE ACTIVE-PATH SLAVE Wired connection 1 ada277fe-966d-33ff-aba2-8ba32d6ce5a9 ethernet 155143 pe 1. maaliskuuta 2019 11.42.13 yes 4294966297 no/org/freedesktop/NetworkManager/Settings/1 yes enx00e04c704f68 activated /org/freedesktop/NetworkManager/ActiveConnection/11 -- virbr0 dc46fe89-5b22-438a-85d5-37be48a077ea bridge 155143 pe 1. maaliskuuta 2019 11.42.13 no 0 no/org/freedesktop/NetworkManager/Settings/2 yes virbr0 activated /org/freedesktop/NetworkManager/ActiveConnection/1 -- nmcli-nm: RUNNING VERSION STATE STARTUP CONNECTIVITY NETWORKING WIFI-HW WIFI WWAN-HW WWAN running 1.10.6 connected started full enabled enabled disabled enabled enabled --- ProblemType: Bug ApportVersion: 2.20.9-0ubuntu7.5 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC1: sami 1315 F pulseaudio /dev/snd/controlC0: sami 1315 F pulseaudio CurrentDesktop: ubuntu:GNOME DistroRelease: Ubuntu 18.04 IfupdownConfig: # interfaces(5) file used by ifup(8) and ifdown(8) auto lo iface lo inet loopback InstallationDate: Installed on 2019-02-20 (11 days ago) InstallationMedia: Ubuntu 18.04.2 LTS "Bionic Beaver" - Release amd64 (20190210) IpRoute: default via 130.232.69.254 dev enx00e04c704f68 proto dhcp metric 100 130.232.69.0/24 dev enx00e04c704f68 proto kernel scope link src 130.232.69.176 metric 100 169.254.0.0/16 dev virbr0 scope link metric 1000 linkdown 192.168.122.0/24 dev virbr0 proto kernel scope link src 192.168.122.1 linkdown MachineType: LENOVO 81H1 NetworkManager.state: [main] NetworkingEnabled=true WirelessEnabled=true WWANEnabled=true Package: network-manager 1.10.6-2ubuntu1.1 PackageArchitecture: amd64 ProcFB: 0 amdgpudrmfb ProcKernelCmdLine: BOOT_IMAGE=/vmlinuz-4.18.0-15-generic root=UUID=a6aaac69-de44-4491-bfb7-0e57c9ff25cf ro rootflags=subvol=@ quiet splash vt.handoff=1 ProcVersionSignature: Ubuntu 4.18.0-15.16~18.04.1-generic 4.18.20 RelatedPackageVersions: linux-restricted-modules-4.18.0-15-generic N/A
[Touch-packages] [Bug 1822156] [NEW] Cannot parse m3u8 playlist
Public bug reported: Hello, I have a m3u8 (utf8 format) playlist, but many players do not understand that file. Neither does totem-pl-parser. Ref: https://developer.gnome.org/totem-pl-parser/stable/ radio.m3u8 attached. ProblemType: Bug DistroRelease: Ubuntu 19.04 Package: libtotem-plparser-dev 3.26.3-1ubuntu1 Uname: Linux 5.0.1-050001-generic x86_64 ApportVersion: 2.20.10-0ubuntu23 Architecture: amd64 CurrentDesktop: ubuntu:GNOME Date: Thu Mar 28 16:06:11 2019 InstallationDate: Installed on 2019-03-06 (21 days ago) InstallationMedia: Ubuntu 19.04 "Disco Dingo" - Alpha amd64 (20190203) SourcePackage: totem-pl-parser UpgradeStatus: No upgrade log present (probably fresh install) ** Affects: totem-pl-parser (Ubuntu) Importance: Undecided Status: New ** Tags: amd64 apport-bug disco ** Attachment added: "radio.m3u8" https://bugs.launchpad.net/bugs/1822156/+attachment/5250230/+files/radio.m3u8 -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to totem-pl-parser in Ubuntu. https://bugs.launchpad.net/bugs/1822156 Title: Cannot parse m3u8 playlist Status in totem-pl-parser package in Ubuntu: New Bug description: Hello, I have a m3u8 (utf8 format) playlist, but many players do not understand that file. Neither does totem-pl-parser. Ref: https://developer.gnome.org/totem-pl-parser/stable/ radio.m3u8 attached. ProblemType: Bug DistroRelease: Ubuntu 19.04 Package: libtotem-plparser-dev 3.26.3-1ubuntu1 Uname: Linux 5.0.1-050001-generic x86_64 ApportVersion: 2.20.10-0ubuntu23 Architecture: amd64 CurrentDesktop: ubuntu:GNOME Date: Thu Mar 28 16:06:11 2019 InstallationDate: Installed on 2019-03-06 (21 days ago) InstallationMedia: Ubuntu 19.04 "Disco Dingo" - Alpha amd64 (20190203) SourcePackage: totem-pl-parser UpgradeStatus: No upgrade log present (probably fresh install) To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/totem-pl-parser/+bug/1822156/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1818204] Re: Qualcomm Atheros QCA9377 wireless does not work
Yes it's purely a kernel bug. -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to network-manager in Ubuntu. https://bugs.launchpad.net/bugs/1818204 Title: Qualcomm Atheros QCA9377 wireless does not work Status in linux package in Ubuntu: Fix Committed Status in network-manager package in Ubuntu: Invalid Status in linux source package in Bionic: Fix Committed Status in network-manager source package in Bionic: New Status in linux source package in Cosmic: Fix Committed Status in network-manager source package in Cosmic: New Bug description: === SRU Justification === [Impact] Lenovo ideapad 530S-14ARR Wifi rfkill hard blocked [Fix] The platform in question doesn't have hardware RF switch, so quirk it off. [Test] User confirm it fixes the issue. [Regression Potential] Minimal. This fix is limited to one specific platform. === Original Bug Report === I have Lenovo 530s laptop with Qualcomm Atheros QCA9377 802.11ac Wireless Network Adapter (rev 31). The menu shows that wireless is off. Turning on the wireless from the menu does not do anything. ProblemType: Bug DistroRelease: Ubuntu 18.04 Package: network-manager 1.10.6-2ubuntu1.1 ProcVersionSignature: Ubuntu 4.18.0-15.16~18.04.1-generic 4.18.20 Uname: Linux 4.18.0-15-generic x86_64 ApportVersion: 2.20.9-0ubuntu7.5 Architecture: amd64 CurrentDesktop: ubuntu:GNOME Date: Fri Mar 1 11:42:34 2019 IfupdownConfig: # interfaces(5) file used by ifup(8) and ifdown(8) auto lo iface lo inet loopback InstallationDate: Installed on 2019-02-20 (8 days ago) InstallationMedia: Ubuntu 18.04.2 LTS "Bionic Beaver" - Release amd64 (20190210) IpRoute: default via 130.232.69.254 dev enx00e04c704f68 proto dhcp metric 100 130.232.69.0/24 dev enx00e04c704f68 proto kernel scope link src 130.232.69.176 metric 100 169.254.0.0/16 dev virbr0 scope link metric 1000 linkdown 192.168.122.0/24 dev virbr0 proto kernel scope link src 192.168.122.1 linkdown NetworkManager.state: [main] NetworkingEnabled=true WirelessEnabled=true WWANEnabled=true SourcePackage: network-manager UpgradeStatus: No upgrade log present (probably fresh install) nmcli-con: NAMEUUID TYPE TIMESTAMP TIMESTAMP-REALAUTOCONNECT AUTOCONNECT-PRIORITY READONLY DBUS-PATH ACTIVE DEVICE STATE ACTIVE-PATH SLAVE Wired connection 1 ada277fe-966d-33ff-aba2-8ba32d6ce5a9 ethernet 155143 pe 1. maaliskuuta 2019 11.42.13 yes 4294966297 no/org/freedesktop/NetworkManager/Settings/1 yes enx00e04c704f68 activated /org/freedesktop/NetworkManager/ActiveConnection/11 -- virbr0 dc46fe89-5b22-438a-85d5-37be48a077ea bridge 155143 pe 1. maaliskuuta 2019 11.42.13 no 0 no/org/freedesktop/NetworkManager/Settings/2 yes virbr0 activated /org/freedesktop/NetworkManager/ActiveConnection/1 -- nmcli-nm: RUNNING VERSION STATE STARTUP CONNECTIVITY NETWORKING WIFI-HW WIFI WWAN-HW WWAN running 1.10.6 connected started full enabled enabled disabled enabled enabled --- ProblemType: Bug ApportVersion: 2.20.9-0ubuntu7.5 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC1: sami 1315 F pulseaudio /dev/snd/controlC0: sami 1315 F pulseaudio CurrentDesktop: ubuntu:GNOME DistroRelease: Ubuntu 18.04 IfupdownConfig: # interfaces(5) file used by ifup(8) and ifdown(8) auto lo iface lo inet loopback InstallationDate: Installed on 2019-02-20 (11 days ago) InstallationMedia: Ubuntu 18.04.2 LTS "Bionic Beaver" - Release amd64 (20190210) IpRoute: default via 130.232.69.254 dev enx00e04c704f68 proto dhcp metric 100 130.232.69.0/24 dev enx00e04c704f68 proto kernel scope link src 130.232.69.176 metric 100 169.254.0.0/16 dev virbr0 scope link metric 1000 linkdown 192.168.122.0/24 dev virbr0 proto kernel scope link src 192.168.122.1 linkdown MachineType: LENOVO 81H1 NetworkManager.state: [main] NetworkingEnabled=true WirelessEnabled=true WWANEnabled=true Package: network-manager 1.10.6-2ubuntu1.1 PackageArchitecture: amd64 ProcFB: 0 amdgpudrmfb ProcKernelCmdLine: BOOT_IMAGE=/vmlinuz-4.18.0-15-generic root=UUID=a6aaac69-de44-4491-bfb7-0e57c9ff25cf ro rootflags=subvol=@ quiet splash vt.handoff=1 ProcVersionSignature: Ubuntu 4.18.0-15.16~18.04.1-generic 4.18.20 RelatedPackageVersions: linux-restricted-modules-4.18.0-15-generic N/A linux-backports-modules-4.18.0-15-generic N/A linux-firmware 1.173.3 Tags: bionic wayland-session wayland-session Uname: Linux
[Touch-packages] [Bug 1805666] Re: Evolution Alarm Notify continues pop-up reminders even though notifications disabled
I think this might still be a bug as I want the notifications in GNOME notifications, just not also via Evolution (which I don't use anyway). -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to evolution-data-server in Ubuntu. https://bugs.launchpad.net/bugs/1805666 Title: Evolution Alarm Notify continues pop-up reminders even though notifications disabled Status in evolution-data-server package in Ubuntu: Invalid Bug description: I have turned off notifications for evolution alarm notify in settings: https://i.imgur.com/BNlfgzA.png But I still get pop-ups from the evolution alarm notify app for calendar events: https://i.imgur.com/BBdr9gm.png ProblemType: Bug DistroRelease: Ubuntu 18.10 Package: evolution-data-server 3.30.1-1build1 ProcVersionSignature: Ubuntu 4.18.0-11.12-generic 4.18.12 Uname: Linux 4.18.0-11-generic x86_64 ApportVersion: 2.20.10-0ubuntu13.1 Architecture: amd64 CurrentDesktop: ubuntu:GNOME Date: Wed Nov 28 11:31:46 2018 ExecutablePath: /usr/lib/evolution/evolution-data-server/evolution-alarm-notify InstallationDate: Installed on 2018-07-14 (136 days ago) InstallationMedia: Ubuntu 18.04 LTS "Bionic Beaver" - Release amd64 (20180426) ProcEnviron: PATH=(custom, no user) XDG_RUNTIME_DIR= LANG=en_US.UTF-8 SHELL=/bin/bash SourcePackage: evolution-data-server UpgradeStatus: Upgraded to cosmic on 2018-10-29 (30 days ago) To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/evolution-data-server/+bug/1805666/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 802626] Re: vgchange may deadlock in initramfs when VG present that's not used for rootfs
I encoured same issue on Ubuntu 18.04 kernel 5.1.0-rc. -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to lvm2 in Ubuntu. https://bugs.launchpad.net/bugs/802626 Title: vgchange may deadlock in initramfs when VG present that's not used for rootfs Status in lvm2 package in Ubuntu: Invalid Status in udev package in Ubuntu: Fix Released Status in lvm2 source package in Oneiric: Invalid Status in udev source package in Oneiric: Fix Released Status in lvm2 source package in Precise: Invalid Status in udev source package in Precise: Fix Released Bug description: The system is now unable to boot. I had to boot on previous kernel 3.0.0. Symptoms are boot freezes. When debugging, issuing a vgscan works ok. doing the vgchange -a y just hangs. I need to reboot the system afterwards. ProblemType: Bug DistroRelease: Ubuntu 11.10 Package: lvm2 2.02.66-4ubuntu2 ProcVersionSignature: Ubuntu 3.0-0.1-generic 3.0.0-rc2 Uname: Linux 3.0-0-generic x86_64 Architecture: amd64 Date: Mon Jun 27 18:15:46 2011 ProcEnviron: LANGUAGE=fr_FR:en PATH=(custom, user) LANG=fr_FR.utf8 LC_MESSAGES=fr_FR.UTF-8 SHELL=/bin/bash SourcePackage: lvm2 UpgradeStatus: No upgrade log present (probably fresh install) To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/lvm2/+bug/802626/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1820886] Re: Potential inconsistency due to system halt/reboot being allowed when package installation in progress
This has been on my agenda for quite some time. It means apt will need to talk dbus, and it might need to be able to react to a shutdown notification from dbus, which might get pretty complex, but I have not checked in detail. It's not clear yet which dbus library to use. Starting with systemd's library would be fine, but we might eventually want to move to gdbus if we choose to implement a new apt daemon in apt using dbus, to not have it be linux-specific. -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to apt in Ubuntu. https://bugs.launchpad.net/bugs/1820886 Title: Potential inconsistency due to system halt/reboot being allowed when package installation in progress Status in apt package in Ubuntu: Triaged Bug description: [System] Any current Ubuntu Desktop/Server supported release (Trusty, Xenial, Bionic, Cosmic). [Impact] Package installation turns into an inconsistent state if system is rebooted in the middle of an apt install/upgrade. [Test Case] 1. User1 at Ubuntu box issues "sudo apt-get upgrade"; 2. User2 at Ubuntu box issues "shutdown -r" or reboots it using the GUI; 3. System reboots and potentially turns into an inconsistent state. [Remarks] APT should automatically inhibit system halts/reboots while packages being installed/removed. A similar behavior to what is shown by unattended-upgrades. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/apt/+bug/1820886/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1820886] Re: Potential inconsistency due to system halt/reboot being allowed when package installation in progress
** Changed in: apt (Ubuntu) Status: New => Triaged ** Changed in: apt (Ubuntu) Assignee: (unassigned) => Julian Andres Klode (juliank) ** Changed in: apt (Ubuntu) Importance: Undecided => High ** Changed in: apt (Ubuntu) Importance: High => Medium -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to apt in Ubuntu. https://bugs.launchpad.net/bugs/1820886 Title: Potential inconsistency due to system halt/reboot being allowed when package installation in progress Status in apt package in Ubuntu: Triaged Bug description: [System] Any current Ubuntu Desktop/Server supported release (Trusty, Xenial, Bionic, Cosmic). [Impact] Package installation turns into an inconsistent state if system is rebooted in the middle of an apt install/upgrade. [Test Case] 1. User1 at Ubuntu box issues "sudo apt-get upgrade"; 2. User2 at Ubuntu box issues "shutdown -r" or reboots it using the GUI; 3. System reboots and potentially turns into an inconsistent state. [Remarks] APT should automatically inhibit system halts/reboots while packages being installed/removed. A similar behavior to what is shown by unattended-upgrades. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/apt/+bug/1820886/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1807856] Re: During do-release-upgrade from 18.04 to 18.10: package lxd 3.0.2-0ubuntu1~18.04.1 failed to install/upgrade: new lxd package pre-installation script subprocess retur
What version of apport did you have installed? This should have been fixed when bug 1766337 was fixed. -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to apport in Ubuntu. https://bugs.launchpad.net/bugs/1807856 Title: During do-release-upgrade from 18.04 to 18.10: package lxd 3.0.2-0ubuntu1~18.04.1 failed to install/upgrade: new lxd package pre- installation script subprocess returned error exit status 1 Status in apport package in Ubuntu: New Status in snapd package in Ubuntu: Confirmed Bug description: [Impact] Upgrading apt version of lxd to snap version during do-release-upgrade failed. I attempted to update my ubuntu server 18.04 system to 18.10 as root: apt update apt dist-upgrade -y apt autoremove -y do-release-upgrade I have an existing LXD installed via apt, and running containers. It asked me which snap LXD to upgrade to, and I selected "latest". Console log: ==> Installing the LXD snap from the latest track for ubuntu-18.10 error: cannot perform the following tasks: - Run install hook of "lxd" snap if present (run hook "install": cannot perform operation: mount /var/lib/snapd/hostfs/var/lib/lxd /var/lib/lxd -o nosuid,nodev,noexec,rbind,rslave: Permission denied) dpkg: error processing archive /tmp/apt-dpkg-install-gdCSiW/32-lxd_1%3a0.4_all.deb (--unpack): new lxd package pre-installation script subprocess returned error exit status 1 Traceback (most recent call last): File "/usr/lib/python3/dist-packages/apt/cache.py", line 265, in __getitem__ rawpkg = self._cache[key] KeyError: '32-lxd' During handling of the above exception, another exception occurred: Traceback (most recent call last): File "/usr/lib/python3/dist-packages/apport/packaging_impl.py", line 126, in _apt_pkg return self._cache()[package] File "/usr/lib/python3/dist-packages/apt/cache.py", line 267, in __getitem__ raise KeyError('The cache has no package named %r' % key) KeyError: "The cache has no package named '32-lxd'" During handling of the above exception, another exception occurred: Traceback (most recent call last): File "/usr/share/apport/package_hook", line 48, in pr['SourcePackage'] = apport.packaging.get_source(options.package) File "/usr/lib/python3/dist-packages/apport/packaging_impl.py", line 159, in get_source if self._apt_pkg(package).installed: File "/usr/lib/python3/dist-packages/apport/packaging_impl.py", line 128, in _apt_pkg raise ValueError('package %s does not exist' % package) ValueError: package 32-lxd does not exist Preparing to unpack .../33-open-iscsi_2.0.874-5ubuntu9.1_amd64.deb ... Unpacking open-iscsi (2.0.874-5ubuntu9.1) over (2.0.874-5ubuntu2.4) ... Preparing to unpack .../34-poppler-data_0.4.9-2_all.deb ... Unpacking poppler-data (0.4.9-2) over (0.4.8-2) ... Preparing to unpack .../35-tasksel-data_3.34ubuntu12_all.deb ... Unpacking tasksel-data (3.34ubuntu12) over (3.34ubuntu11) ... Preparing to unpack .../36-tasksel_3.34ubuntu12_all.deb ... Unpacking tasksel (3.34ubuntu12) over (3.34ubuntu11) ... Preparing to unpack .../37-libsepol1_2.8-1_amd64.deb ... Unpacking libsepol1:amd64 (2.8-1) over (2.7-1) ... Errors were encountered while processing: /tmp/apt-dpkg-install-gdCSiW/32-lxd_1%3a0.4_all.deb Exception during pm.DoInstall(): E:Sub-process /usr/bin/dpkg returned an error code (1) *** Send problem report to the
[Touch-packages] [Bug 1822073] Re: Bluetooth headset profile forgotten after disconnection
Status changed to 'Confirmed' because the bug affects multiple users. ** Changed in: pulseaudio (Ubuntu) Status: New => Confirmed -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to pulseaudio in Ubuntu. https://bugs.launchpad.net/bugs/1822073 Title: Bluetooth headset profile forgotten after disconnection Status in pulseaudio package in Ubuntu: Confirmed Bug description: Similar to bug 1283003, after connecting my Bluetooth headset (Sony WH-1000X M3) they appear in Gnome Control Centre's Sound tab but are not selectable. I've narrowed down the circumstances to reproduce the bug as follows: 1. Start with working sound through Bluetooth to headset 2. In pavucontrol's Configuration tab, note that headset is listed with A2DP profile 3. Disconnect (power off) the headset 4. Note that sound comes out of fallback device (as expected) 5. Power on the headset and reconnect to Bluetooth 6. Look in Gnome Control Centre and note the headset appears in Sound, but is not selectable (buggy) 7. In pavucontrol's Configuration tab, note headset is listed with "Off" 8. Manually switch to A2DP 9. At the point, we have to cycle the connection again (disconnect/reconnect) and then sound is once more routed to the headset. ProblemType: Bug DistroRelease: Ubuntu 18.04 Package: pulseaudio 1:11.1-1ubuntu7.2 ProcVersionSignature: Ubuntu 4.15.0-46.49-generic 4.15.18 Uname: Linux 4.15.0-46-generic x86_64 NonfreeKernelModules: zfs zunicode zavl icp zcommon znvpair nvidia_modeset nvidia ApportVersion: 2.20.9-0ubuntu7.6 Architecture: amd64 CurrentDesktop: ubuntu:GNOME Date: Thu Mar 28 10:33:37 2019 InstallationDate: Installed on 2015-07-04 (1363 days ago) InstallationMedia: Ubuntu 15.04 "Vivid Vervet" - Release amd64 (20150422) SourcePackage: pulseaudio UpgradeStatus: No upgrade log present (probably fresh install) dmi.bios.date: 12/23/2014 dmi.bios.vendor: American Megatrends Inc. dmi.bios.version: V1.9 dmi.board.asset.tag: To be filled by O.E.M. dmi.board.name: Z97 GAMING 5 (MS-7917) dmi.board.vendor: MSI dmi.board.version: 1.0 dmi.chassis.asset.tag: To be filled by O.E.M. dmi.chassis.type: 3 dmi.chassis.vendor: MSI dmi.chassis.version: 1.0 dmi.modalias: dmi:bvnAmericanMegatrendsInc.:bvrV1.9:bd12/23/2014:svnMSI:pnMS-7917:pvr1.0:rvnMSI:rnZ97GAMING5(MS-7917):rvr1.0:cvnMSI:ct3:cvr1.0: dmi.product.family: To be filled by O.E.M. dmi.product.name: MS-7917 dmi.product.version: 1.0 dmi.sys.vendor: MSI To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/pulseaudio/+bug/1822073/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1818204] Re: Qualcomm Atheros QCA9377 wireless does not work
Does this need any fix in network-manager? Seems to be fully fixed by the kernel patch. -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to network-manager in Ubuntu. https://bugs.launchpad.net/bugs/1818204 Title: Qualcomm Atheros QCA9377 wireless does not work Status in linux package in Ubuntu: Fix Committed Status in network-manager package in Ubuntu: Invalid Status in linux source package in Bionic: Fix Committed Status in network-manager source package in Bionic: New Status in linux source package in Cosmic: Fix Committed Status in network-manager source package in Cosmic: New Bug description: === SRU Justification === [Impact] Lenovo ideapad 530S-14ARR Wifi rfkill hard blocked [Fix] The platform in question doesn't have hardware RF switch, so quirk it off. [Test] User confirm it fixes the issue. [Regression Potential] Minimal. This fix is limited to one specific platform. === Original Bug Report === I have Lenovo 530s laptop with Qualcomm Atheros QCA9377 802.11ac Wireless Network Adapter (rev 31). The menu shows that wireless is off. Turning on the wireless from the menu does not do anything. ProblemType: Bug DistroRelease: Ubuntu 18.04 Package: network-manager 1.10.6-2ubuntu1.1 ProcVersionSignature: Ubuntu 4.18.0-15.16~18.04.1-generic 4.18.20 Uname: Linux 4.18.0-15-generic x86_64 ApportVersion: 2.20.9-0ubuntu7.5 Architecture: amd64 CurrentDesktop: ubuntu:GNOME Date: Fri Mar 1 11:42:34 2019 IfupdownConfig: # interfaces(5) file used by ifup(8) and ifdown(8) auto lo iface lo inet loopback InstallationDate: Installed on 2019-02-20 (8 days ago) InstallationMedia: Ubuntu 18.04.2 LTS "Bionic Beaver" - Release amd64 (20190210) IpRoute: default via 130.232.69.254 dev enx00e04c704f68 proto dhcp metric 100 130.232.69.0/24 dev enx00e04c704f68 proto kernel scope link src 130.232.69.176 metric 100 169.254.0.0/16 dev virbr0 scope link metric 1000 linkdown 192.168.122.0/24 dev virbr0 proto kernel scope link src 192.168.122.1 linkdown NetworkManager.state: [main] NetworkingEnabled=true WirelessEnabled=true WWANEnabled=true SourcePackage: network-manager UpgradeStatus: No upgrade log present (probably fresh install) nmcli-con: NAMEUUID TYPE TIMESTAMP TIMESTAMP-REALAUTOCONNECT AUTOCONNECT-PRIORITY READONLY DBUS-PATH ACTIVE DEVICE STATE ACTIVE-PATH SLAVE Wired connection 1 ada277fe-966d-33ff-aba2-8ba32d6ce5a9 ethernet 155143 pe 1. maaliskuuta 2019 11.42.13 yes 4294966297 no/org/freedesktop/NetworkManager/Settings/1 yes enx00e04c704f68 activated /org/freedesktop/NetworkManager/ActiveConnection/11 -- virbr0 dc46fe89-5b22-438a-85d5-37be48a077ea bridge 155143 pe 1. maaliskuuta 2019 11.42.13 no 0 no/org/freedesktop/NetworkManager/Settings/2 yes virbr0 activated /org/freedesktop/NetworkManager/ActiveConnection/1 -- nmcli-nm: RUNNING VERSION STATE STARTUP CONNECTIVITY NETWORKING WIFI-HW WIFI WWAN-HW WWAN running 1.10.6 connected started full enabled enabled disabled enabled enabled --- ProblemType: Bug ApportVersion: 2.20.9-0ubuntu7.5 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC1: sami 1315 F pulseaudio /dev/snd/controlC0: sami 1315 F pulseaudio CurrentDesktop: ubuntu:GNOME DistroRelease: Ubuntu 18.04 IfupdownConfig: # interfaces(5) file used by ifup(8) and ifdown(8) auto lo iface lo inet loopback InstallationDate: Installed on 2019-02-20 (11 days ago) InstallationMedia: Ubuntu 18.04.2 LTS "Bionic Beaver" - Release amd64 (20190210) IpRoute: default via 130.232.69.254 dev enx00e04c704f68 proto dhcp metric 100 130.232.69.0/24 dev enx00e04c704f68 proto kernel scope link src 130.232.69.176 metric 100 169.254.0.0/16 dev virbr0 scope link metric 1000 linkdown 192.168.122.0/24 dev virbr0 proto kernel scope link src 192.168.122.1 linkdown MachineType: LENOVO 81H1 NetworkManager.state: [main] NetworkingEnabled=true WirelessEnabled=true WWANEnabled=true Package: network-manager 1.10.6-2ubuntu1.1 PackageArchitecture: amd64 ProcFB: 0 amdgpudrmfb ProcKernelCmdLine: BOOT_IMAGE=/vmlinuz-4.18.0-15-generic root=UUID=a6aaac69-de44-4491-bfb7-0e57c9ff25cf ro rootflags=subvol=@ quiet splash vt.handoff=1 ProcVersionSignature: Ubuntu 4.18.0-15.16~18.04.1-generic 4.18.20 RelatedPackageVersions: linux-restricted-modules-4.18.0-15-generic N/A linux-backports-modules-4.18.0-15-generic N/A linux-firmware 1.173.3 Tags:
[Touch-packages] [Bug 1822092] Re: FFe: Mesa 19.0.1 for disco
doesn't really need a ffe since it's a bugfix release, but doesn't hurt to have one either.. -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to mesa in Ubuntu. https://bugs.launchpad.net/bugs/1822092 Title: FFe: Mesa 19.0.1 for disco Status in mesa package in Ubuntu: New Bug description: Mesa 19.0.1 is a bug fix release which fixes bugs found since the 19.0.0 release. Mesa 19.0.1 implements the OpenGL 4.5 API, but the version reported by glGetString(GL_VERSION) or glGetIntegerv(GL_MAJOR_VERSION) / glGetIntegerv(GL_MINOR_VERSION) depends on the particular driver being used. Some drivers don't support all the features required in OpenGL 4.5. OpenGL 4.5 is only available if requested at context creation. Compatibility contexts may report a lower version depending on each driver. https://www.mesa3d.org/relnotes/19.0.1.html To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/mesa/+bug/1822092/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1822075] Re: tooltips and combo boxes in webbrowsers are all garbage
I tried xserver-xorg-video-ati and xserver-xorg-video-radeon 19.0.1-0ubuntu1~ppa1 from ~canonical-x/x-staging and it fixes the issue ** Also affects: xserver-xorg-video-ati (Ubuntu) Importance: Undecided Status: New ** Changed in: gtk+3.0 (Ubuntu) Status: Incomplete => Invalid ** Changed in: mesa (Ubuntu) Status: Incomplete => Invalid ** Changed in: mutter (Ubuntu) Status: Incomplete => Invalid ** Changed in: xserver-xorg-video-ati (Ubuntu) Status: New => Triaged ** Changed in: xserver-xorg-video-ati (Ubuntu) Importance: Undecided => High ** Tags removed: rls-dd-incoming ** Tags added: rls-dd-tracking -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to mesa in Ubuntu. https://bugs.launchpad.net/bugs/1822075 Title: tooltips and combo boxes in webbrowsers are all garbage Status in gtk+3.0 package in Ubuntu: Invalid Status in mesa package in Ubuntu: Invalid Status in mutter package in Ubuntu: Invalid Status in xserver-xorg-video-ati package in Ubuntu: Triaged Bug description: Disco up to date With Chrome and Firefox tooltips and combo boxes are all garbage and make the browser unusable. Cf screenshots. Graphics card: Advanced Micro Devices, Inc. [AMD/ATI] Juniper XT [Radeon HD 5770] I tried gtk2 and gtk3 demos and the combo boxes are broken in the same way. I also tried FF as a snap and as a deb and the problem is the same. ProblemType: Bug DistroRelease: Ubuntu 19.04 Package: gnome-shell 3.32.0-1ubuntu1 ProcVersionSignature: Ubuntu 5.0.0-7.8-generic 5.0.0 Uname: Linux 5.0.0-7-generic x86_64 NonfreeKernelModules: zfs zunicode zavl icp zcommon znvpair ApportVersion: 2.20.10-0ubuntu23 Architecture: amd64 CurrentDesktop: ubuntu:GNOME Date: Thu Mar 28 11:51:41 2019 DisplayManager: gdm3 InstallationDate: Installed on 2014-07-15 (1717 days ago) InstallationMedia: Ubuntu 14.10 "Utopic Unicorn" - Alpha amd64 (20140520) SourcePackage: gnome-shell UpgradeStatus: Upgraded to disco on 2018-03-24 (368 days ago) To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/gtk+3.0/+bug/1822075/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1811129] Re: update ufw to 0.36
I've verified this on cosmic using a combination of test-ufw.py from QRT (which in addition to various smoke/etc tests, runs all the tests in the testsuite, including root/iptables tests): ufw: Installed: 0.36-0ubuntu0.18.10.1 Candidate: 0.36-0ubuntu0.18.10.1 Version table: *** 0.36-0ubuntu0.18.10.1 500 500 http://us.archive.ubuntu.com/ubuntu cosmic-proposed/main amd64 Packages 500 http://us.archive.ubuntu.com/ubuntu cosmic-proposed/main i386 Packages 100 /var/lib/dpkg/status 0.35-6 500 500 http://us.archive.ubuntu.com/ubuntu cosmic/main amd64 Packages 500 http://us.archive.ubuntu.com/ubuntu cosmic/main i386 Packages ** Tags removed: verification-needed verification-needed-bionic verification-needed-cosmic ** Tags added: verification-done verification-done-bionic verification-done-cosmic -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to ufw in Ubuntu. https://bugs.launchpad.net/bugs/1811129 Title: update ufw to 0.36 Status in ufw package in Ubuntu: Fix Released Status in ufw source package in Bionic: Fix Committed Status in ufw source package in Cosmic: Fix Committed Status in ufw source package in Disco: Fix Released Bug description: [Impact] This bug is the master bug for a one time SRU of ufw to the new 0.36 release. Typically patches would be individually backported like normal, but the new 'prepend' command feature is the impetus for this SRU and it contains most of the code changes. Other bugs fixed in the upstream release are either already included in the Ubuntu/Debian packaging or small enough to not pose a significant regression risk. 0.36 had various pyflakes/pep8/pylint cleanups over 0.35 so upgrading 18.04 to 0.36 will make maintaining ufw a bit easier for the duration of this LTS. [Test Case] In addition to the in-build tests, there is an extensive testsuite for running under root on the live system. The QRT tests for ufw (scripts /test-ufw.py) run these tests (and more). [Regression Potential] In terms of code changes, I've attached code-changes-bionic-to- disco.diff which is a diff of the source code in bionic's 0.35-5 with patches applied and disco's 0.36-1 with its patches applied. This shows that: * only comment changes to conf/sysctl.conf * only comment changes to conf/ufw.defaults * doc/systemd.example is updated (but unused in our packaging) * various man page updates * ufw.pot is refreshed * various Makefile updates related to snap packaging and coverage (the debian packaging only uses the 'clean' target) * src/applications.py has only whitespace and comment changes The remaining code changes in src/ are quite small and address the SRU bugs and the regression potential for these changes will be discussed in those bugs. In addition to the SRU bugs listed in the changelog, 0.36 also fixes the following upstream bugs not already in 0.35-5: * bug 1782384 - ufw-framework document error * bug 1695718 - UFW rule for Transmission only allows 51413/tcp while 51413/udp is used for DHT * bug 1377600 - ufw errors after ctr+c interupt * bug 1586258 - Rule insertion fails if ruleset is empty * bug 1558068 - remove extraneous source quench rule * https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=884932 - cannot preseed package configuration in debian-installer (other bugs in the 0.36-1 changelog are dupes of the above) [Other Info] Note that the 0.36 code base has been the basis for the snap for many months with the majority of the non-'prepend' changes in production during this time. 0.36-1 was uploaded to Debian in December (and it migrated automatically to disco shortly after) with no new ufw bug reports in either. Buster will release with 0.36-1. The snappy packaging, which is included upstream, underwent a lot of changes, but should not be considered as part of this SRU since it doesn't affect the deb builds. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/ufw/+bug/1811129/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1811129] Re: update ufw to 0.36
I've verified this on bionic using a combination of test-ufw.py from QRT (which in addition to various smoke/etc tests, runs all the tests in the testsuite, including root/iptables tests): ufw: Installed: 0.36-0ubuntu0.18.04.1 Candidate: 0.36-0ubuntu0.18.04.1 Version table: *** 0.36-0ubuntu0.18.04.1 500 500 http://us.archive.ubuntu.com/ubuntu bionic-proposed/main amd64 Packages 500 http://us.archive.ubuntu.com/ubuntu bionic-proposed/main i386 Packages 100 /var/lib/dpkg/status 0.35-5 500 500 http://us.archive.ubuntu.com/ubuntu bionic/main amd64 Packages 500 http://us.archive.ubuntu.com/ubuntu bionic/main i386 Packages -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to ufw in Ubuntu. https://bugs.launchpad.net/bugs/1811129 Title: update ufw to 0.36 Status in ufw package in Ubuntu: Fix Released Status in ufw source package in Bionic: Fix Committed Status in ufw source package in Cosmic: Fix Committed Status in ufw source package in Disco: Fix Released Bug description: [Impact] This bug is the master bug for a one time SRU of ufw to the new 0.36 release. Typically patches would be individually backported like normal, but the new 'prepend' command feature is the impetus for this SRU and it contains most of the code changes. Other bugs fixed in the upstream release are either already included in the Ubuntu/Debian packaging or small enough to not pose a significant regression risk. 0.36 had various pyflakes/pep8/pylint cleanups over 0.35 so upgrading 18.04 to 0.36 will make maintaining ufw a bit easier for the duration of this LTS. [Test Case] In addition to the in-build tests, there is an extensive testsuite for running under root on the live system. The QRT tests for ufw (scripts /test-ufw.py) run these tests (and more). [Regression Potential] In terms of code changes, I've attached code-changes-bionic-to- disco.diff which is a diff of the source code in bionic's 0.35-5 with patches applied and disco's 0.36-1 with its patches applied. This shows that: * only comment changes to conf/sysctl.conf * only comment changes to conf/ufw.defaults * doc/systemd.example is updated (but unused in our packaging) * various man page updates * ufw.pot is refreshed * various Makefile updates related to snap packaging and coverage (the debian packaging only uses the 'clean' target) * src/applications.py has only whitespace and comment changes The remaining code changes in src/ are quite small and address the SRU bugs and the regression potential for these changes will be discussed in those bugs. In addition to the SRU bugs listed in the changelog, 0.36 also fixes the following upstream bugs not already in 0.35-5: * bug 1782384 - ufw-framework document error * bug 1695718 - UFW rule for Transmission only allows 51413/tcp while 51413/udp is used for DHT * bug 1377600 - ufw errors after ctr+c interupt * bug 1586258 - Rule insertion fails if ruleset is empty * bug 1558068 - remove extraneous source quench rule * https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=884932 - cannot preseed package configuration in debian-installer (other bugs in the 0.36-1 changelog are dupes of the above) [Other Info] Note that the 0.36 code base has been the basis for the snap for many months with the majority of the non-'prepend' changes in production during this time. 0.36-1 was uploaded to Debian in December (and it migrated automatically to disco shortly after) with no new ufw bug reports in either. Buster will release with 0.36-1. The snappy packaging, which is included upstream, underwent a lot of changes, but should not be considered as part of this SRU since it doesn't affect the deb builds. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/ufw/+bug/1811129/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1607845] Re: List of versioned kernels is not right for Ubuntu
In the proposed fix for LP: #1821640 there is an autopkgtest to catch missing patterns. It is scheduled to be fixed in Disco +1. It is not an exact duplicate, because this bug covers very old packages to match (for autoremoval this makes sense IMO), while the other one covers the patterns for current packages. -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to apt in Ubuntu. https://bugs.launchpad.net/bugs/1607845 Title: List of versioned kernels is not right for Ubuntu Status in apt package in Ubuntu: In Progress Bug description: The following command outputs the list: $ apt-config dump --no-empty --format '%v%n' 'APT::VersionedKernelPackages' linux-image linux-headers linux-image-extra linux-signed-image kfreebsd-image kfreebsd-headers gnumach-image .*-modules .*-kernel linux-backports-modules-.* linux-tools but the list does not 'contain linux-.*-tools' and 'linux-goldfish- headers', which are versioned kernel packages as well, if I have understood correctly. On the other hand are these values appropriate for Ubuntu? kfreebsd-image kfreebsd-headers gnumach-image .*-modules .*-kernel Same thing for Ubuntu 14.04. ProblemType: Bug DistroRelease: Ubuntu 16.04 Package: apt 1.2.12~ubuntu16.04.1 ProcVersionSignature: Ubuntu 4.4.0-31.50-generic 4.4.13 Uname: Linux 4.4.0-31-generic x86_64 NonfreeKernelModules: nvidia_uvm nvidia ApportVersion: 2.20.1-0ubuntu2.1 Architecture: amd64 CurrentDesktop: XFCE Date: Fri Jul 29 18:55:50 2016 EcryptfsInUse: Yes InstallationDate: Installed on 2015-11-21 (250 days ago) InstallationMedia: Xubuntu 15.10 "Wily Werewolf" - Release amd64 (20151021) SourcePackage: apt UpgradeStatus: Upgraded to xenial on 2016-06-24 (35 days ago) To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/apt/+bug/1607845/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1821582] Re: Don't rely on SysV init script in logrotate config
[VERIFICATION XENIAL #3] $ logrotate -vdf /etc/logrotate.conf: works as expected ... renaming /var/log/syslog.7.gz to /var/log/syslog.8.gz (rotatecount 7, logstart 1, i 7), renaming /var/log/syslog.6.gz to /var/log/syslog.7.gz (rotatecount 7, logstart 1, i 6), renaming /var/log/syslog.5.gz to /var/log/syslog.6.gz (rotatecount 7, logstart 1, i 5), renaming /var/log/syslog.4.gz to /var/log/syslog.5.gz (rotatecount 7, logstart 1, i 4), renaming /var/log/syslog.3.gz to /var/log/syslog.4.gz (rotatecount 7, logstart 1, i 3), renaming /var/log/syslog.2.gz to /var/log/syslog.3.gz (rotatecount 7, logstart 1, i 2), renaming /var/log/syslog.1.gz to /var/log/syslog.2.gz (rotatecount 7, logstart 1, i 1), renaming /var/log/syslog.0.gz to /var/log/syslog.1.gz (rotatecount 7, logstart 1, i 0), renaming /var/log/syslog to /var/log/syslog.1 creating new /var/log/syslog mode = 0640 uid = 104 gid = 4 running postrotate script running script with arg /var/log/syslog: " /usr/lib/rsyslog/rsyslog-rotate " removing old log /var/log/syslog.8.gz error: error opening /var/log/syslog.8.gz: No such file or directory switching euid to 0 and egid to 0 ** Tags removed: verification-needed-xenial ** Tags added: verification-done-xenial -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to rsyslog in Ubuntu. https://bugs.launchpad.net/bugs/1821582 Title: Don't rely on SysV init script in logrotate config Status in rsyslog package in Ubuntu: Fix Released Status in rsyslog source package in Xenial: Fix Committed Bug description: [IMPACT] Xenial uses systemd as default now, debian salsa 4a49edf26d405726041bee12a42d6f064145c87e, introduce a shell script, taking advantage of systemctl directly if systemd is active by still keeping Sysv init script as fallback only. While there is no 'real' impact, I think it make total sense for a systemd Xenial system, to use the systemctl approach for log rotation It has been brought to my attention by a Ubuntu user that: "Xenial logrotate is not able to perform full log rotation on a LXC container without the 'sys_ptrace' capability[1] using the Sysv approach, invoke-rc.d just fails" I have created a test pkg for this user, and the same user was able to conclude that it was working as expected with the systemd approach (systemctl) when sys_ptrace is disable inside the container. [1] - lxc config set raw.lxc lxc.cap.drop=sys_ptrace [TEST CASE] == [1] - On a Xenial active systemd system: == Determine the script pick the right decision (systemd approach). # bash -vx /usr/lib/rsyslog/rsyslog-rotate Run logrotate which contains 'include /etc/logrotate.d', thus will use the rsyslog log rotation information, now using '/usr/lib/rsyslog/rsyslog-rotate' helper. # logrotate -vdf /etc/logrotate.conf Check if logs rotation happened in /var/log. # ls -altr /var/log == [2] - On a Xenial active upstart system: == Determine the script pick the right decision (non-systemd approach). # bash -vx /usr/lib/rsyslog/rsyslog-rotate Run logrotate which contains 'include /etc/logrotate.d', thus will use the rsyslog log rotation information, now using '/usr/lib/rsyslog/rsyslog-rotate' helper. # logrotate -vdf /etc/logrotate.conf Check if logs rotation happened in /var/log. # ls -altr /var/log [POTENTIAL REGRESSION * None, this commit introduced a new shell script (rsyslog-rotate) which uses systemctl directly if systemd is active (default in Xenial) but keeps the original Sysv init script as fallback only. Meaning no behaviour change for users who decided not to use systemd on their Xenial system. * I don't see any reported bug about this new helper for Bionic/Cosmic which has it since their released. /usr/lib/rsyslog/rsyslog-rotate: 1) Check if existence of systemd, if yes: systemctl kill -s HUP rsyslog.service 2) Check if existence of systemd, if no: invoke-rc.d rsyslog rotate > /dev/null [OTHER INFO] * Salsa rsyslog repository: https://salsa.debian.org/debian/rsyslog/commit/4a49edf26d405726041bee12a42d6f064145c87e * First introduced: git describe --contains 4a49edf26d405726041bee12a42d6f064145c87e debian/8.27.0-4~1 * rmadison: => rsyslog | 8.16.0-1ubuntu3 | xenial rsyslog | 8.32.0-1ubuntu4 | bionic rsyslog | 8.32.0-1ubuntu5 | cosmic rsyslog | 8.32.0-1ubuntu7 | disco To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/rsyslog/+bug/1821582/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help :
[Touch-packages] [Bug 1821582] Re: Don't rely on SysV init script in logrotate config
[VERIFICATION XENIAL #1] It has been brought to my attention the following by a Ubuntu user: "My team confirms that the package which is in -proposed solves our issue." This user was having issue doing rsyslog logrotation inside a container which has SYS_PTRACE turned off. Using the systemctl approach fixed their problem. [VERIFICATION XENIAL #2] * On a systemd machine: $ bash -xv /usr/lib/rsyslog/rsyslog-rotate #!/bin/sh if [ -d /run/systemd/system ]; then systemctl kill -s HUP rsyslog.service else invoke-rc.d rsyslog rotate > /dev/null fi + '[' -d /run/systemd/system ']' + systemctl kill -s HUP rsyslog.service * /etc/logrotate.d/rsyslog remains exactly the same minus the fact that it now calls this 'rsyslog-rotate' helper to take action depending of systemd or upstart. * rsyslog rotation works as expected. This was all tested with rsyslog version: 8.16.0-1ubuntu3.1 -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to rsyslog in Ubuntu. https://bugs.launchpad.net/bugs/1821582 Title: Don't rely on SysV init script in logrotate config Status in rsyslog package in Ubuntu: Fix Released Status in rsyslog source package in Xenial: Fix Committed Bug description: [IMPACT] Xenial uses systemd as default now, debian salsa 4a49edf26d405726041bee12a42d6f064145c87e, introduce a shell script, taking advantage of systemctl directly if systemd is active by still keeping Sysv init script as fallback only. While there is no 'real' impact, I think it make total sense for a systemd Xenial system, to use the systemctl approach for log rotation It has been brought to my attention by a Ubuntu user that: "Xenial logrotate is not able to perform full log rotation on a LXC container without the 'sys_ptrace' capability[1] using the Sysv approach, invoke-rc.d just fails" I have created a test pkg for this user, and the same user was able to conclude that it was working as expected with the systemd approach (systemctl) when sys_ptrace is disable inside the container. [1] - lxc config set raw.lxc lxc.cap.drop=sys_ptrace [TEST CASE] == [1] - On a Xenial active systemd system: == Determine the script pick the right decision (systemd approach). # bash -vx /usr/lib/rsyslog/rsyslog-rotate Run logrotate which contains 'include /etc/logrotate.d', thus will use the rsyslog log rotation information, now using '/usr/lib/rsyslog/rsyslog-rotate' helper. # logrotate -vdf /etc/logrotate.conf Check if logs rotation happened in /var/log. # ls -altr /var/log == [2] - On a Xenial active upstart system: == Determine the script pick the right decision (non-systemd approach). # bash -vx /usr/lib/rsyslog/rsyslog-rotate Run logrotate which contains 'include /etc/logrotate.d', thus will use the rsyslog log rotation information, now using '/usr/lib/rsyslog/rsyslog-rotate' helper. # logrotate -vdf /etc/logrotate.conf Check if logs rotation happened in /var/log. # ls -altr /var/log [POTENTIAL REGRESSION * None, this commit introduced a new shell script (rsyslog-rotate) which uses systemctl directly if systemd is active (default in Xenial) but keeps the original Sysv init script as fallback only. Meaning no behaviour change for users who decided not to use systemd on their Xenial system. * I don't see any reported bug about this new helper for Bionic/Cosmic which has it since their released. /usr/lib/rsyslog/rsyslog-rotate: 1) Check if existence of systemd, if yes: systemctl kill -s HUP rsyslog.service 2) Check if existence of systemd, if no: invoke-rc.d rsyslog rotate > /dev/null [OTHER INFO] * Salsa rsyslog repository: https://salsa.debian.org/debian/rsyslog/commit/4a49edf26d405726041bee12a42d6f064145c87e * First introduced: git describe --contains 4a49edf26d405726041bee12a42d6f064145c87e debian/8.27.0-4~1 * rmadison: => rsyslog | 8.16.0-1ubuntu3 | xenial rsyslog | 8.32.0-1ubuntu4 | bionic rsyslog | 8.32.0-1ubuntu5 | cosmic rsyslog | 8.32.0-1ubuntu7 | disco To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/rsyslog/+bug/1821582/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1822092] [NEW] FFe: Mesa 19.0.1 for disco
Public bug reported: Mesa 19.0.1 is a bug fix release which fixes bugs found since the 19.0.0 release. Mesa 19.0.1 implements the OpenGL 4.5 API, but the version reported by glGetString(GL_VERSION) or glGetIntegerv(GL_MAJOR_VERSION) / glGetIntegerv(GL_MINOR_VERSION) depends on the particular driver being used. Some drivers don't support all the features required in OpenGL 4.5. OpenGL 4.5 is only available if requested at context creation. Compatibility contexts may report a lower version depending on each driver. https://www.mesa3d.org/relnotes/19.0.1.html ** Affects: mesa (Ubuntu) Importance: Undecided Status: New ** Description changed: Mesa 19.0.1 is a bug fix release which fixes bugs found since the 19.0.0 release. Mesa 19.0.1 implements the OpenGL 4.5 API, but the version reported by glGetString(GL_VERSION) or glGetIntegerv(GL_MAJOR_VERSION) / glGetIntegerv(GL_MINOR_VERSION) depends on the particular driver being used. Some drivers don't support all the features required in OpenGL 4.5. OpenGL 4.5 is only available if requested at context creation. Compatibility contexts may report a lower version depending on each driver. + + https://www.mesa3d.org/relnotes/19.0.1.html -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to mesa in Ubuntu. https://bugs.launchpad.net/bugs/1822092 Title: FFe: Mesa 19.0.1 for disco Status in mesa package in Ubuntu: New Bug description: Mesa 19.0.1 is a bug fix release which fixes bugs found since the 19.0.0 release. Mesa 19.0.1 implements the OpenGL 4.5 API, but the version reported by glGetString(GL_VERSION) or glGetIntegerv(GL_MAJOR_VERSION) / glGetIntegerv(GL_MINOR_VERSION) depends on the particular driver being used. Some drivers don't support all the features required in OpenGL 4.5. OpenGL 4.5 is only available if requested at context creation. Compatibility contexts may report a lower version depending on each driver. https://www.mesa3d.org/relnotes/19.0.1.html To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/mesa/+bug/1822092/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1821904] Re: Gnome Shell always started muted on Disco
** Attachment added: "allpackages.txt" https://bugs.launchpad.net/ubuntu/+source/pulseaudio/+bug/1821904/+attachment/5250172/+files/allpackages.txt -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to pulseaudio in Ubuntu. https://bugs.launchpad.net/bugs/1821904 Title: Gnome Shell always started muted on Disco Status in pulseaudio package in Ubuntu: Incomplete Bug description: On Disco, Gnome Shell always starts muted. --- ProblemType: Bug ApportVersion: 2.20.10-0ubuntu23 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: joe4766 F pulseaudio /dev/snd/pcmC0D0p: joe4766 F...m pulseaudio CurrentDesktop: ubuntu:GNOME DistroRelease: Ubuntu 19.04 InstallationDate: Installed on 2018-09-15 (193 days ago) InstallationMedia: Ubuntu 18.04.1 LTS "Bionic Beaver" - Release amd64 (20180725) NonfreeKernelModules: zfs zunicode zavl icp zcommon znvpair Package: pulseaudio 1:12.2-2ubuntu1 PackageArchitecture: amd64 ProcVersionSignature: Ubuntu 5.0.0-7.8-generic 5.0.0 Tags: disco wayland-session Uname: Linux 5.0.0-7-generic x86_64 UpgradeStatus: Upgraded to disco on 2019-03-20 (7 days ago) UserGroups: adm cdrom dip input kvm libvirt lpadmin lxd plugdev sambashare sudo _MarkForUpload: True dmi.bios.date: 02/14/2019 dmi.bios.vendor: Dell Inc. dmi.bios.version: 1.8.1 dmi.board.name: 0F6P3V dmi.board.vendor: Dell Inc. dmi.board.version: A00 dmi.chassis.type: 10 dmi.chassis.vendor: Dell Inc. dmi.modalias: dmi:bvnDellInc.:bvr1.8.1:bd02/14/2019:svnDellInc.:pnXPS139370:pvr:rvnDellInc.:rn0F6P3V:rvrA00:cvnDellInc.:ct10:cvr: dmi.product.family: XPS dmi.product.name: XPS 13 9370 dmi.product.sku: 07E6 dmi.sys.vendor: Dell Inc. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/pulseaudio/+bug/1821904/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1821904] Dependencies.txt
apport information ** Attachment added: "Dependencies.txt" https://bugs.launchpad.net/bugs/1821904/+attachment/5250168/+files/Dependencies.txt -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to pulseaudio in Ubuntu. https://bugs.launchpad.net/bugs/1821904 Title: Gnome Shell always started muted on Disco Status in pulseaudio package in Ubuntu: Incomplete Bug description: On Disco, Gnome Shell always starts muted. --- ProblemType: Bug ApportVersion: 2.20.10-0ubuntu23 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: joe4766 F pulseaudio /dev/snd/pcmC0D0p: joe4766 F...m pulseaudio CurrentDesktop: ubuntu:GNOME DistroRelease: Ubuntu 19.04 InstallationDate: Installed on 2018-09-15 (193 days ago) InstallationMedia: Ubuntu 18.04.1 LTS "Bionic Beaver" - Release amd64 (20180725) NonfreeKernelModules: zfs zunicode zavl icp zcommon znvpair Package: pulseaudio 1:12.2-2ubuntu1 PackageArchitecture: amd64 ProcVersionSignature: Ubuntu 5.0.0-7.8-generic 5.0.0 Tags: disco wayland-session Uname: Linux 5.0.0-7-generic x86_64 UpgradeStatus: Upgraded to disco on 2019-03-20 (7 days ago) UserGroups: adm cdrom dip input kvm libvirt lpadmin lxd plugdev sambashare sudo _MarkForUpload: True dmi.bios.date: 02/14/2019 dmi.bios.vendor: Dell Inc. dmi.bios.version: 1.8.1 dmi.board.name: 0F6P3V dmi.board.vendor: Dell Inc. dmi.board.version: A00 dmi.chassis.type: 10 dmi.chassis.vendor: Dell Inc. dmi.modalias: dmi:bvnDellInc.:bvr1.8.1:bd02/14/2019:svnDellInc.:pnXPS139370:pvr:rvnDellInc.:rn0F6P3V:rvrA00:cvnDellInc.:ct10:cvr: dmi.product.family: XPS dmi.product.name: XPS 13 9370 dmi.product.sku: 07E6 dmi.sys.vendor: Dell Inc. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/pulseaudio/+bug/1821904/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1821904] ProcCpuinfoMinimal.txt
apport information ** Attachment added: "ProcCpuinfoMinimal.txt" https://bugs.launchpad.net/bugs/1821904/+attachment/5250169/+files/ProcCpuinfoMinimal.txt -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to pulseaudio in Ubuntu. https://bugs.launchpad.net/bugs/1821904 Title: Gnome Shell always started muted on Disco Status in pulseaudio package in Ubuntu: Incomplete Bug description: On Disco, Gnome Shell always starts muted. --- ProblemType: Bug ApportVersion: 2.20.10-0ubuntu23 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: joe4766 F pulseaudio /dev/snd/pcmC0D0p: joe4766 F...m pulseaudio CurrentDesktop: ubuntu:GNOME DistroRelease: Ubuntu 19.04 InstallationDate: Installed on 2018-09-15 (193 days ago) InstallationMedia: Ubuntu 18.04.1 LTS "Bionic Beaver" - Release amd64 (20180725) NonfreeKernelModules: zfs zunicode zavl icp zcommon znvpair Package: pulseaudio 1:12.2-2ubuntu1 PackageArchitecture: amd64 ProcVersionSignature: Ubuntu 5.0.0-7.8-generic 5.0.0 Tags: disco wayland-session Uname: Linux 5.0.0-7-generic x86_64 UpgradeStatus: Upgraded to disco on 2019-03-20 (7 days ago) UserGroups: adm cdrom dip input kvm libvirt lpadmin lxd plugdev sambashare sudo _MarkForUpload: True dmi.bios.date: 02/14/2019 dmi.bios.vendor: Dell Inc. dmi.bios.version: 1.8.1 dmi.board.name: 0F6P3V dmi.board.vendor: Dell Inc. dmi.board.version: A00 dmi.chassis.type: 10 dmi.chassis.vendor: Dell Inc. dmi.modalias: dmi:bvnDellInc.:bvr1.8.1:bd02/14/2019:svnDellInc.:pnXPS139370:pvr:rvnDellInc.:rn0F6P3V:rvrA00:cvnDellInc.:ct10:cvr: dmi.product.family: XPS dmi.product.name: XPS 13 9370 dmi.product.sku: 07E6 dmi.sys.vendor: Dell Inc. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/pulseaudio/+bug/1821904/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1821904] ProcEnviron.txt
apport information ** Attachment added: "ProcEnviron.txt" https://bugs.launchpad.net/bugs/1821904/+attachment/5250170/+files/ProcEnviron.txt -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to pulseaudio in Ubuntu. https://bugs.launchpad.net/bugs/1821904 Title: Gnome Shell always started muted on Disco Status in pulseaudio package in Ubuntu: Incomplete Bug description: On Disco, Gnome Shell always starts muted. --- ProblemType: Bug ApportVersion: 2.20.10-0ubuntu23 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: joe4766 F pulseaudio /dev/snd/pcmC0D0p: joe4766 F...m pulseaudio CurrentDesktop: ubuntu:GNOME DistroRelease: Ubuntu 19.04 InstallationDate: Installed on 2018-09-15 (193 days ago) InstallationMedia: Ubuntu 18.04.1 LTS "Bionic Beaver" - Release amd64 (20180725) NonfreeKernelModules: zfs zunicode zavl icp zcommon znvpair Package: pulseaudio 1:12.2-2ubuntu1 PackageArchitecture: amd64 ProcVersionSignature: Ubuntu 5.0.0-7.8-generic 5.0.0 Tags: disco wayland-session Uname: Linux 5.0.0-7-generic x86_64 UpgradeStatus: Upgraded to disco on 2019-03-20 (7 days ago) UserGroups: adm cdrom dip input kvm libvirt lpadmin lxd plugdev sambashare sudo _MarkForUpload: True dmi.bios.date: 02/14/2019 dmi.bios.vendor: Dell Inc. dmi.bios.version: 1.8.1 dmi.board.name: 0F6P3V dmi.board.vendor: Dell Inc. dmi.board.version: A00 dmi.chassis.type: 10 dmi.chassis.vendor: Dell Inc. dmi.modalias: dmi:bvnDellInc.:bvr1.8.1:bd02/14/2019:svnDellInc.:pnXPS139370:pvr:rvnDellInc.:rn0F6P3V:rvrA00:cvnDellInc.:ct10:cvr: dmi.product.family: XPS dmi.product.name: XPS 13 9370 dmi.product.sku: 07E6 dmi.sys.vendor: Dell Inc. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/pulseaudio/+bug/1821904/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1821904] CurrentDmesg.txt
apport information ** Attachment added: "CurrentDmesg.txt" https://bugs.launchpad.net/bugs/1821904/+attachment/5250167/+files/CurrentDmesg.txt -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to pulseaudio in Ubuntu. https://bugs.launchpad.net/bugs/1821904 Title: Gnome Shell always started muted on Disco Status in pulseaudio package in Ubuntu: Incomplete Bug description: On Disco, Gnome Shell always starts muted. --- ProblemType: Bug ApportVersion: 2.20.10-0ubuntu23 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: joe4766 F pulseaudio /dev/snd/pcmC0D0p: joe4766 F...m pulseaudio CurrentDesktop: ubuntu:GNOME DistroRelease: Ubuntu 19.04 InstallationDate: Installed on 2018-09-15 (193 days ago) InstallationMedia: Ubuntu 18.04.1 LTS "Bionic Beaver" - Release amd64 (20180725) NonfreeKernelModules: zfs zunicode zavl icp zcommon znvpair Package: pulseaudio 1:12.2-2ubuntu1 PackageArchitecture: amd64 ProcVersionSignature: Ubuntu 5.0.0-7.8-generic 5.0.0 Tags: disco wayland-session Uname: Linux 5.0.0-7-generic x86_64 UpgradeStatus: Upgraded to disco on 2019-03-20 (7 days ago) UserGroups: adm cdrom dip input kvm libvirt lpadmin lxd plugdev sambashare sudo _MarkForUpload: True dmi.bios.date: 02/14/2019 dmi.bios.vendor: Dell Inc. dmi.bios.version: 1.8.1 dmi.board.name: 0F6P3V dmi.board.vendor: Dell Inc. dmi.board.version: A00 dmi.chassis.type: 10 dmi.chassis.vendor: Dell Inc. dmi.modalias: dmi:bvnDellInc.:bvr1.8.1:bd02/14/2019:svnDellInc.:pnXPS139370:pvr:rvnDellInc.:rn0F6P3V:rvrA00:cvnDellInc.:ct10:cvr: dmi.product.family: XPS dmi.product.name: XPS 13 9370 dmi.product.sku: 07E6 dmi.sys.vendor: Dell Inc. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/pulseaudio/+bug/1821904/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1821904] PulseList.txt
apport information ** Attachment added: "PulseList.txt" https://bugs.launchpad.net/bugs/1821904/+attachment/5250171/+files/PulseList.txt -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to pulseaudio in Ubuntu. https://bugs.launchpad.net/bugs/1821904 Title: Gnome Shell always started muted on Disco Status in pulseaudio package in Ubuntu: Incomplete Bug description: On Disco, Gnome Shell always starts muted. --- ProblemType: Bug ApportVersion: 2.20.10-0ubuntu23 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: joe4766 F pulseaudio /dev/snd/pcmC0D0p: joe4766 F...m pulseaudio CurrentDesktop: ubuntu:GNOME DistroRelease: Ubuntu 19.04 InstallationDate: Installed on 2018-09-15 (193 days ago) InstallationMedia: Ubuntu 18.04.1 LTS "Bionic Beaver" - Release amd64 (20180725) NonfreeKernelModules: zfs zunicode zavl icp zcommon znvpair Package: pulseaudio 1:12.2-2ubuntu1 PackageArchitecture: amd64 ProcVersionSignature: Ubuntu 5.0.0-7.8-generic 5.0.0 Tags: disco wayland-session Uname: Linux 5.0.0-7-generic x86_64 UpgradeStatus: Upgraded to disco on 2019-03-20 (7 days ago) UserGroups: adm cdrom dip input kvm libvirt lpadmin lxd plugdev sambashare sudo _MarkForUpload: True dmi.bios.date: 02/14/2019 dmi.bios.vendor: Dell Inc. dmi.bios.version: 1.8.1 dmi.board.name: 0F6P3V dmi.board.vendor: Dell Inc. dmi.board.version: A00 dmi.chassis.type: 10 dmi.chassis.vendor: Dell Inc. dmi.modalias: dmi:bvnDellInc.:bvr1.8.1:bd02/14/2019:svnDellInc.:pnXPS139370:pvr:rvnDellInc.:rn0F6P3V:rvrA00:cvnDellInc.:ct10:cvr: dmi.product.family: XPS dmi.product.name: XPS 13 9370 dmi.product.sku: 07E6 dmi.sys.vendor: Dell Inc. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/pulseaudio/+bug/1821904/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1821904] Re: Gnome Shell always started muted on Disco
Thanks Dan, hopefully they're all here. -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to pulseaudio in Ubuntu. https://bugs.launchpad.net/bugs/1821904 Title: Gnome Shell always started muted on Disco Status in pulseaudio package in Ubuntu: Incomplete Bug description: On Disco, Gnome Shell always starts muted. --- ProblemType: Bug ApportVersion: 2.20.10-0ubuntu23 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: joe4766 F pulseaudio /dev/snd/pcmC0D0p: joe4766 F...m pulseaudio CurrentDesktop: ubuntu:GNOME DistroRelease: Ubuntu 19.04 InstallationDate: Installed on 2018-09-15 (193 days ago) InstallationMedia: Ubuntu 18.04.1 LTS "Bionic Beaver" - Release amd64 (20180725) NonfreeKernelModules: zfs zunicode zavl icp zcommon znvpair Package: pulseaudio 1:12.2-2ubuntu1 PackageArchitecture: amd64 ProcVersionSignature: Ubuntu 5.0.0-7.8-generic 5.0.0 Tags: disco wayland-session Uname: Linux 5.0.0-7-generic x86_64 UpgradeStatus: Upgraded to disco on 2019-03-20 (7 days ago) UserGroups: adm cdrom dip input kvm libvirt lpadmin lxd plugdev sambashare sudo _MarkForUpload: True dmi.bios.date: 02/14/2019 dmi.bios.vendor: Dell Inc. dmi.bios.version: 1.8.1 dmi.board.name: 0F6P3V dmi.board.vendor: Dell Inc. dmi.board.version: A00 dmi.chassis.type: 10 dmi.chassis.vendor: Dell Inc. dmi.modalias: dmi:bvnDellInc.:bvr1.8.1:bd02/14/2019:svnDellInc.:pnXPS139370:pvr:rvnDellInc.:rn0F6P3V:rvrA00:cvnDellInc.:ct10:cvr: dmi.product.family: XPS dmi.product.name: XPS 13 9370 dmi.product.sku: 07E6 dmi.sys.vendor: Dell Inc. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/pulseaudio/+bug/1821904/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1821904] Re: Gnome Shell always started muted on Disco
apport information ** Tags added: apport-collected wayland-session ** Description changed: On Disco, Gnome Shell always starts muted. + --- + ProblemType: Bug + ApportVersion: 2.20.10-0ubuntu23 + Architecture: amd64 + AudioDevicesInUse: + USERPID ACCESS COMMAND + /dev/snd/controlC0: joe4766 F pulseaudio + /dev/snd/pcmC0D0p: joe4766 F...m pulseaudio + CurrentDesktop: ubuntu:GNOME + DistroRelease: Ubuntu 19.04 + InstallationDate: Installed on 2018-09-15 (193 days ago) + InstallationMedia: Ubuntu 18.04.1 LTS "Bionic Beaver" - Release amd64 (20180725) + NonfreeKernelModules: zfs zunicode zavl icp zcommon znvpair + Package: pulseaudio 1:12.2-2ubuntu1 + PackageArchitecture: amd64 + ProcVersionSignature: Ubuntu 5.0.0-7.8-generic 5.0.0 + Tags: disco wayland-session + Uname: Linux 5.0.0-7-generic x86_64 + UpgradeStatus: Upgraded to disco on 2019-03-20 (7 days ago) + UserGroups: adm cdrom dip input kvm libvirt lpadmin lxd plugdev sambashare sudo + _MarkForUpload: True + dmi.bios.date: 02/14/2019 + dmi.bios.vendor: Dell Inc. + dmi.bios.version: 1.8.1 + dmi.board.name: 0F6P3V + dmi.board.vendor: Dell Inc. + dmi.board.version: A00 + dmi.chassis.type: 10 + dmi.chassis.vendor: Dell Inc. + dmi.modalias: dmi:bvnDellInc.:bvr1.8.1:bd02/14/2019:svnDellInc.:pnXPS139370:pvr:rvnDellInc.:rn0F6P3V:rvrA00:cvnDellInc.:ct10:cvr: + dmi.product.family: XPS + dmi.product.name: XPS 13 9370 + dmi.product.sku: 07E6 + dmi.sys.vendor: Dell Inc. ** Attachment added: "AlsaInfo.txt" https://bugs.launchpad.net/bugs/1821904/+attachment/5250166/+files/AlsaInfo.txt -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to pulseaudio in Ubuntu. https://bugs.launchpad.net/bugs/1821904 Title: Gnome Shell always started muted on Disco Status in pulseaudio package in Ubuntu: Incomplete Bug description: On Disco, Gnome Shell always starts muted. --- ProblemType: Bug ApportVersion: 2.20.10-0ubuntu23 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: joe4766 F pulseaudio /dev/snd/pcmC0D0p: joe4766 F...m pulseaudio CurrentDesktop: ubuntu:GNOME DistroRelease: Ubuntu 19.04 InstallationDate: Installed on 2018-09-15 (193 days ago) InstallationMedia: Ubuntu 18.04.1 LTS "Bionic Beaver" - Release amd64 (20180725) NonfreeKernelModules: zfs zunicode zavl icp zcommon znvpair Package: pulseaudio 1:12.2-2ubuntu1 PackageArchitecture: amd64 ProcVersionSignature: Ubuntu 5.0.0-7.8-generic 5.0.0 Tags: disco wayland-session Uname: Linux 5.0.0-7-generic x86_64 UpgradeStatus: Upgraded to disco on 2019-03-20 (7 days ago) UserGroups: adm cdrom dip input kvm libvirt lpadmin lxd plugdev sambashare sudo _MarkForUpload: True dmi.bios.date: 02/14/2019 dmi.bios.vendor: Dell Inc. dmi.bios.version: 1.8.1 dmi.board.name: 0F6P3V dmi.board.vendor: Dell Inc. dmi.board.version: A00 dmi.chassis.type: 10 dmi.chassis.vendor: Dell Inc. dmi.modalias: dmi:bvnDellInc.:bvr1.8.1:bd02/14/2019:svnDellInc.:pnXPS139370:pvr:rvnDellInc.:rn0F6P3V:rvrA00:cvnDellInc.:ct10:cvr: dmi.product.family: XPS dmi.product.name: XPS 13 9370 dmi.product.sku: 07E6 dmi.sys.vendor: Dell Inc. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/pulseaudio/+bug/1821904/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1821936] Re: ALC274 unsupported
See post #5 at https://bugs.launchpad.net/ubuntu/+source/alsa- driver/+bug/1784485 It references another Linux variant (eww). But, reading their thread you will find that they made a patch in December 2018 to solve the 294 issue. Then, the bug report for Ubuntu let to y'all doing the same. I've done all the same steps mentioned in both threads. It appears that the same patch is needed for ACL274. Post 28 from December 2018, https://forum.manjaro.org/t/alc294-analog- audio-card-detected-but-no-sound-internaly-or-headphones/54089/28, states: "each one of ASUS new laptop models with Realtek ALC294 have individual hwinfo SubVendor and SubDevice values. They are needed for QUIRK hack directly in /sound/pci/hda/patch_realtek.c file." Additionally, it includes 3 patches for the kernel regarding realtek.c. This makes sense since all other methods to resolve fail. So, what commands should I run to get you all that data to solve this matter? :-) -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to alsa-driver in Ubuntu. https://bugs.launchpad.net/bugs/1821936 Title: ALC274 unsupported Status in alsa-driver package in Ubuntu: Incomplete Status in linux package in Ubuntu: Incomplete Bug description: I find this to be an issue with current LTS 18.04's latest 4.19 kernel. I tested this on mainline 4.20 and 5.0 kernels as well. No audio because ALC274 not properly loaded for use, so no audio output. A related card had a similar bug, which was fixed, and may be of use in resolving this one: https://bugs.launchpad.net/ubuntu/+source/alsa-driver/+bug/1784485 # cat /proc/asound/card0/codec* | grep Codec Codec: Realtek ALC274 Codec: Intel Kabylake HDMI # cat /proc/asound/card0/pcm0c/info card: 0 device: 0 subdevice: 0 stream: CAPTURE id: ALC274 Analog name: ALC274 Analog subname: subdevice #0 class: 0 subclass: 0 subdevices_count: 1 subdevices_avail: 0 aplay -l List of PLAYBACK Hardware Devices card 0: PCH [HDA Intel PCH], device 0: ALC274 Analog [ALC274 Analog] Subdevices: 1/1 Subdevice #0: subdevice #0 card 0: PCH [HDA Intel PCH], device 3: HDMI 0 [HDMI 0] Subdevices: 1/1 Subdevice #0: subdevice #0 card 0: PCH [HDA Intel PCH], device 7: HDMI 1 [HDMI 1] Subdevices: 1/1 Subdevice #0: subdevice #0 card 0: PCH [HDA Intel PCH], device 8: HDMI 2 [HDMI 2] Subdevices: 1/1 Subdevice #0: subdevice #0 card 0: PCH [HDA Intel PCH], device 9: HDMI 3 [HDMI 3] Subdevices: 1/1 Subdevice #0: subdevice #0 card 0: PCH [HDA Intel PCH], device 10: HDMI 4 [HDMI 4] Subdevices: 1/1 Subdevice #0: subdevice #0 d# hwinfo --sound 21: PCI 1f.3: 0403 Audio device [Created at pci.378] Unique ID: nS1_.WnojYJLVCm0 SysFS ID: /devices/pci:00/:00:1f.3 SysFS BusID: :00:1f.3 Hardware Class: sound Model: "Intel Audio device" Vendor: pci 0x8086 "Intel Corporation" Device: pci 0xa348 SubVendor: pci 0x1043 "ASUSTeK Computer Inc." SubDevice: pci 0x31d0 Revision: 0x10 Driver: "snd_hda_intel" Driver Modules: "snd_hda_intel" Memory Range: 0xdd398000-0xdd39bfff (rw,non-prefetchable) Memory Range: 0xdd10-0xdd1f (rw,non-prefetchable) IRQ: 145 (663 events) Module Alias: "pci:v8086dA348sv1043sd31D0bc04sc03i80" Driver Info #0: Driver Status: snd_hda_intel is active Driver Activation Cmd: "modprobe snd_hda_intel" Config Status: cfg=new, avail=yes, need=no, active=unknown To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/alsa-driver/+bug/1821936/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1822085] [NEW] Often the VGA screen stops working after screen saver was on
Public bug reported: I have two connected external monitors. They are connected through a Dell Dock W15. One is connected with VGA, the other with DP. Sometimes the VGA monitor complains about the resolution and will not work after the screen saver has been active (and putting the monitors to sleep). When shutting down the system, it then hangs and I have to force a shutdown with the power button. There seems to be a kernel crash before as seen in the dmesg log. ** Affects: xorg (Ubuntu) Importance: Undecided Status: New ** Tags: amd64 apport-bug bionic ubuntu ** Description changed: I have two connected external monitors. They are connected through a Dell Dock W15. One is connected with VGA, the other with DP. Sometimes the VGA monitor complains about the resolution and will not work after the screen saver has been active (and putting the monitors to sleep). When shutting down the system, it then hangs and I have to force a shutdown with the power button. - There seems to be a kernel crash before, because the kernel log contains this: - Mar 22 13:29:38 sebastian-XPS-13-9380 kernel: [100351.716527] [drm:intel_cpu_fifo_underrun_irq_handler [i915]] *ERROR* CPU pipe A FIFO underrun - Mar 22 13:29:38 sebastian-XPS-13-9380 kernel: [100351.885407] [drm:pipe_config_err [i915]] *ERROR* mismatch in pixel_rate (expected 154000, found 307999) - Mar 22 13:29:38 sebastian-XPS-13-9380 kernel: [100351.885470] [drm:pipe_config_err [i915]] *ERROR* mismatch in shared_dpll (expected 3a7a8132, found 332b2d53) - Mar 22 13:29:38 sebastian-XPS-13-9380 kernel: [100351.885524] [drm:pipe_config_err [i915]] *ERROR* mismatch in dpll_hw_state.ctrl1 (expected 0x0003, found 0x0001) - Mar 22 13:29:38 sebastian-XPS-13-9380 kernel: [100351.885573] [drm:pipe_config_err [i915]] *ERROR* mismatch in base.adjusted_mode.crtc_clock (expected 154000, found 307999) - Mar 22 13:29:38 sebastian-XPS-13-9380 kernel: [100351.885618] [drm:pipe_config_err [i915]] *ERROR* mismatch in port_clock (expected 27, found 54) - Mar 22 13:29:38 sebastian-XPS-13-9380 kernel: [100351.885620] [ cut here ] - Mar 22 13:29:38 sebastian-XPS-13-9380 kernel: [100351.885621] pipe state doesn't match! - Mar 22 13:29:38 sebastian-XPS-13-9380 kernel: [100351.885760] WARNING: CPU: 5 PID: 2855 at /build/linux-oem-PiIumz/linux-oem-4.15.0/drivers/gpu/drm/i915/intel_display.c:11601 intel_atomic_commit_tail+0xc8e/0xd30 [i915] - Mar 22 13:29:38 sebastian-XPS-13-9380 kernel: [100351.885762] Modules linked in: rfcomm ccm cdc_acm cdc_ether usbnet cmac r8152 mii snd_usb_audio snd_usbmidi_lib bnep snd_hda_codec_hdmi btusb btrtl btbcm btintel bluetooth uvcvideo videobuf2_vmalloc videobuf2_memops ecdh_generic videobuf2_v4l2 videobuf2_core videodev media pci_stub arc4 vboxpci(OE) vboxnetadp(OE) xfrm_user vboxnetflt(OE) xfrm4_tunnel tunnel4 ipcomp xfrm_ipcomp esp4 ah4 af_key xfrm_algo vboxdrv(OE) l2tp_ppp l2tp_netlink l2tp_core ip6_udp_tunnel udp_tunnel pppox hid_multitouch snd_soc_skl dell_laptop intel_rapl snd_soc_skl_ipc x86_pkg_temp_thermal intel_powerclamp snd_hda_ext_core snd_hda_codec_realtek snd_soc_sst_dsp snd_hda_codec_generic coretemp snd_soc_sst_ipc kvm_intel snd_soc_acpi kvm snd_soc_core irqbypass snd_compress crct10dif_pclmul ac97_bus crc32_pclmul snd_pcm_dmaengine - Mar 22 13:29:38 sebastian-XPS-13-9380 kernel: [100351.885846] ghash_clmulni_intel pcbc aesni_intel aes_x86_64 crypto_simd glue_helper cryptd intel_cstate intel_rapl_perf joydev input_leds serio_raw binfmt_misc dell_wmi dell_smbios dcdbas nls_iso8859_1 dell_wmi_descriptor wmi_bmof intel_wmi_thunderbolt snd_hda_intel snd_hda_codec snd_hda_core snd_hwdep snd_pcm snd_seq_midi snd_seq_midi_event ath10k_pci snd_rawmidi ath10k_core snd_seq ath snd_seq_device mac80211 snd_timer snd idma64 virt_dma soundcore cfg80211 rtsx_pci_ms mei_me memstick intel_lpss_pci mei intel_lpss ucsi_acpi processor_thermal_device intel_pch_thermal intel_soc_dts_iosf typec_ucsi typec mac_hid acpi_pad int3403_thermal intel_hid int3400_thermal int340x_thermal_zone acpi_thermal_rel sparse_keymap sch_fq_codel parport_pc ppdev lp parport ip_tables x_tables autofs4 btrfs xor zstd_compress - Mar 22 13:29:38 sebastian-XPS-13-9380 kernel: [100351.885931] raid6_pq uas usb_storage hid_generic usbhid i915 rtsx_pci_sdmmc i2c_algo_bit psmouse drm_kms_helper syscopyarea sysfillrect thunderbolt sysimgblt fb_sys_fops rtsx_pci drm wmi i2c_hid hid video - Mar 22 13:29:38 sebastian-XPS-13-9380 kernel: [100351.885962] CPU: 5 PID: 2855 Comm: Xorg Tainted: GW OE4.15.0-1034-oem #39-Ubuntu - Mar 22 13:29:38 sebastian-XPS-13-9380 kernel: [100351.885964] Hardware name: Dell Inc. XPS 13 9380/0KTDY6, BIOS 1.2.1 02/14/2019 - Mar 22 13:29:38 sebastian-XPS-13-9380 kernel: [100351.886017] RIP: 0010:intel_atomic_commit_tail+0xc8e/0xd30 [i915] - Mar 22 13:29:38 sebastian-XPS-13-9380 kernel: [100351.886020] RSP:
[Touch-packages] [Bug 1368411] Re: Cannot insert IPV6 rule before IPV4 rules
Tested this is fixed in cosmic: $ apt-cache policy ufw ufw: Installed: 0.36-0ubuntu0.18.10.1 Candidate: 0.36-0ubuntu0.18.10.1 Version table: *** 0.36-0ubuntu0.18.10.1 500 500 http://us.archive.ubuntu.com/ubuntu cosmic-proposed/main amd64 Packages 500 http://us.archive.ubuntu.com/ubuntu cosmic-proposed/main i386 Packages 100 /var/lib/dpkg/status 0.35-6 500 500 http://us.archive.ubuntu.com/ubuntu cosmic/main amd64 Packages 500 http://us.archive.ubuntu.com/ubuntu cosmic/main i386 Packages ** Tags removed: verification-needed verification-needed-bionic verification-needed-cosmic ** Tags added: verification-done verification-done-bionic verification-done-cosmic -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to ufw in Ubuntu. https://bugs.launchpad.net/bugs/1368411 Title: Cannot insert IPV6 rule before IPV4 rules Status in ufw: Fix Released Status in ufw package in Ubuntu: Fix Released Status in ufw source package in Bionic: Fix Committed Status in ufw source package in Cosmic: Fix Committed Status in ufw source package in Disco: Fix Released Status in ufw package in Debian: Fix Released Bug description: [Impact] ufw's 'insert' command is designed to work with 'ufw status numbered' to insert rules in specific places in the ruleset. This makes it more difficult than it should be for using ufw as part of an IPS/dynamic firewall (eg, fail2ban) since if the firewall already has an IPv4 rule then the user/IPS must calculate the position of an IPv6-only rule before inserting it. From the git commit: " add 'prepend' command Introduce 'prepend' command to add rules to the top of the IPv4 and/or IPv6 chains. This is particularly useful for dynamic firewalls/IPS (eg, fail2ban). Unlike 'insert', 'prepend' does not require knowledge about the IPv6 rule number so integration into IPS is much easier. " [Test Case] $ sudo ufw allow 22/tcp $ sudo ufw allow from 1.2.3.4 $ sudo ufw allow from 2001:db8::/32 $ sudo ufw enable $ sudo ufw status numbered ... [ 1] 22/tcp ALLOW INAnywhere [ 2] Anywhere ALLOW IN1.2.3.4 [ 3] 22/tcp (v6)ALLOW INAnywhere (v6) [ 4] Anywhere (v6) ALLOW IN2001:db8::/32 # unchanged from 0.35 $ sudo ufw insert 1 deny from 2a02:2210:12:a:b820:fff:fea2:25d1 ERROR: Invalid position '1' # new in 0.36 $ sudo ufw prepend deny from 2a02:2210:12:a:b820:fff:fea2:25d1 $ sudo ufw prepend deny from 6.7.8.9 $ sudo ufw status numbered ... [ 1] Anywhere DENY IN 6.7.8.9 [ 2] 22/tcp ALLOW INAnywhere [ 3] Anywhere ALLOW IN1.2.3.4 [ 4] Anywhere (v6) DENY IN 2a02:2210:12:a:b820:fff:fea2:25d1 [ 5] 22/tcp (v6)ALLOW INAnywhere (v6) [ 6] Anywhere (v6) ALLOW IN2001:db8::/32 [Regression Potential] ufw has a clean methodology for adding new commands so while frontend.py necessarily has some logic changes to calculate where to insert the rule (ie, if IPv4 at the top, if IPv6 before other IPv6 rules and if both, both), the changes were minimal and only are used if 'prepend' is specified (so people only using the previous command set should be fine). [Other Info] The ufw prepend command is new in 0.36 and thus only available in Debian, Ubuntu disco and the ufw snap for a few weeks. The snap is known to work with fail2ban and the prepend command in production environments since it was available. = Original description = I am unable to insert any rules concerning IPV6 before IPV4 rules. Thus, when IPV4 rules are numbered 1 to 5 and IPV6 rules are numbered 6 to 10, the following command: [code] ufw insert 1 deny from 2a02:2210:12:a:b820:fff:fea2:25d1 [/code] errors with "ERROR: Invalid position '1'". However, the command [code] ufw insert 6 deny from 2a02:2210:12:a:b820:fff:fea2:25d1 [/code] succeeds. In my case, this poses a problem, since I am trying to insert rules from a script against brute force attacks. The script needs to insert blocking rules before a number of other rules that open up some ports (since the order of rules is important in ufw). However since the number of IPV4 rules will be changing all the time, the position of the first available number for an IPV6 address is hard to determine. Proposed solution: either allow IPV6 rules to precede IPV4 rules, or implement a keyword defining the first available position; e.g. "ufw insert first deny from 2a02:2210:12:a:b820:fff:fea2:25d1". BTW: this was all figured out with ufw version 0.31.1-1, Ubuntu 12.04.5 LTS, To manage notifications about this bug go to: https://bugs.launchpad.net/ufw/+bug/1368411/+subscriptions -- Mailing list:
[Touch-packages] [Bug 1368411] Re: Cannot insert IPV6 rule before IPV4 rules
Verified this is fixed in bionic: $ apt-cache policy ufw ufw: Installed: 0.36-0ubuntu0.18.04.1 Candidate: 0.36-0ubuntu0.18.04.1 Version table: *** 0.36-0ubuntu0.18.04.1 500 500 http://us.archive.ubuntu.com/ubuntu bionic-proposed/main amd64 Packages 500 http://us.archive.ubuntu.com/ubuntu bionic-proposed/main i386 Packages 100 /var/lib/dpkg/status 0.35-5 500 500 http://us.archive.ubuntu.com/ubuntu bionic/main amd64 Packages 500 http://us.archive.ubuntu.com/ubuntu bionic/main i386 Packages -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to ufw in Ubuntu. https://bugs.launchpad.net/bugs/1368411 Title: Cannot insert IPV6 rule before IPV4 rules Status in ufw: Fix Released Status in ufw package in Ubuntu: Fix Released Status in ufw source package in Bionic: Fix Committed Status in ufw source package in Cosmic: Fix Committed Status in ufw source package in Disco: Fix Released Status in ufw package in Debian: Fix Released Bug description: [Impact] ufw's 'insert' command is designed to work with 'ufw status numbered' to insert rules in specific places in the ruleset. This makes it more difficult than it should be for using ufw as part of an IPS/dynamic firewall (eg, fail2ban) since if the firewall already has an IPv4 rule then the user/IPS must calculate the position of an IPv6-only rule before inserting it. From the git commit: " add 'prepend' command Introduce 'prepend' command to add rules to the top of the IPv4 and/or IPv6 chains. This is particularly useful for dynamic firewalls/IPS (eg, fail2ban). Unlike 'insert', 'prepend' does not require knowledge about the IPv6 rule number so integration into IPS is much easier. " [Test Case] $ sudo ufw allow 22/tcp $ sudo ufw allow from 1.2.3.4 $ sudo ufw allow from 2001:db8::/32 $ sudo ufw enable $ sudo ufw status numbered ... [ 1] 22/tcp ALLOW INAnywhere [ 2] Anywhere ALLOW IN1.2.3.4 [ 3] 22/tcp (v6)ALLOW INAnywhere (v6) [ 4] Anywhere (v6) ALLOW IN2001:db8::/32 # unchanged from 0.35 $ sudo ufw insert 1 deny from 2a02:2210:12:a:b820:fff:fea2:25d1 ERROR: Invalid position '1' # new in 0.36 $ sudo ufw prepend deny from 2a02:2210:12:a:b820:fff:fea2:25d1 $ sudo ufw prepend deny from 6.7.8.9 $ sudo ufw status numbered ... [ 1] Anywhere DENY IN 6.7.8.9 [ 2] 22/tcp ALLOW INAnywhere [ 3] Anywhere ALLOW IN1.2.3.4 [ 4] Anywhere (v6) DENY IN 2a02:2210:12:a:b820:fff:fea2:25d1 [ 5] 22/tcp (v6)ALLOW INAnywhere (v6) [ 6] Anywhere (v6) ALLOW IN2001:db8::/32 [Regression Potential] ufw has a clean methodology for adding new commands so while frontend.py necessarily has some logic changes to calculate where to insert the rule (ie, if IPv4 at the top, if IPv6 before other IPv6 rules and if both, both), the changes were minimal and only are used if 'prepend' is specified (so people only using the previous command set should be fine). [Other Info] The ufw prepend command is new in 0.36 and thus only available in Debian, Ubuntu disco and the ufw snap for a few weeks. The snap is known to work with fail2ban and the prepend command in production environments since it was available. = Original description = I am unable to insert any rules concerning IPV6 before IPV4 rules. Thus, when IPV4 rules are numbered 1 to 5 and IPV6 rules are numbered 6 to 10, the following command: [code] ufw insert 1 deny from 2a02:2210:12:a:b820:fff:fea2:25d1 [/code] errors with "ERROR: Invalid position '1'". However, the command [code] ufw insert 6 deny from 2a02:2210:12:a:b820:fff:fea2:25d1 [/code] succeeds. In my case, this poses a problem, since I am trying to insert rules from a script against brute force attacks. The script needs to insert blocking rules before a number of other rules that open up some ports (since the order of rules is important in ufw). However since the number of IPV4 rules will be changing all the time, the position of the first available number for an IPV6 address is hard to determine. Proposed solution: either allow IPV6 rules to precede IPV4 rules, or implement a keyword defining the first available position; e.g. "ufw insert first deny from 2a02:2210:12:a:b820:fff:fea2:25d1". BTW: this was all figured out with ufw version 0.31.1-1, Ubuntu 12.04.5 LTS, To manage notifications about this bug go to: https://bugs.launchpad.net/ufw/+bug/1368411/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1204579] Re: ufw doesn't support concurrent updates
Verified this is fixed in bionic: $ apt-cache policy ufw ufw: Installed: 0.36-0ubuntu0.18.04.1 Candidate: 0.36-0ubuntu0.18.04.1 Version table: *** 0.36-0ubuntu0.18.04.1 500 500 http://us.archive.ubuntu.com/ubuntu bionic-proposed/main amd64 Packages 500 http://us.archive.ubuntu.com/ubuntu bionic-proposed/main i386 Packages 100 /var/lib/dpkg/status 0.35-5 500 500 http://us.archive.ubuntu.com/ubuntu bionic/main amd64 Packages 500 http://us.archive.ubuntu.com/ubuntu bionic/main i386 Packages -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to ufw in Ubuntu. https://bugs.launchpad.net/bugs/1204579 Title: ufw doesn't support concurrent updates Status in ufw: Fix Released Status in ufw package in Ubuntu: Fix Released Status in ufw source package in Bionic: Fix Committed Status in ufw source package in Cosmic: Fix Committed Status in ufw source package in Disco: Fix Released Status in ufw package in Debian: Fix Released Bug description: [Impact] ufw prior to 0.36 did not support locking or use xtables locking which can lead to problems when using ufw as a dynamic firewall. [Test Case] $ sudo apt-get install python-minimal # for the test script $ sudo ./test_ufw_threads.py # this runs for many seconds A patched ufw will complete with no errors. With an unpatched ufw, there will be many errors like: $ sudo ./test_ufw_threads.py ... ERROR: initcaps [Errno 2] iptables: Chain already exists. ERROR: initcaps [Errno 2] iptables: Chain already exists. [Regression Potential] ufw 0.36 implements a global exclusive lock before doing any kernel or file writes. Risk of regression includes the lock file not being released due to coding error. The locking is done via fcntl.lockf and ufw releases it in a finally clause that is careful to always release it. [Other Info] This locking code has been in production in the ufw snap for years and is known to work is static environments as well as in dynamic environments (IPS/fail2ban/etc). = Original description = On a server under Ubuntu 12.04 I automatically update firewall rules and I unfortunately noticed that if 2 rules are processed at the same time it leads to an inconsistent result between iptables and ufw status. In fact it can be reproduced using the python script in attachment. Before executing this script I didn't have any rules matching the ip 192.168.254.1 on my computer. After a launch iptables takes into acount 464 rules. sudo iptables -L -n | grep 192.168.254.1 | wc -l 464 It should be 500 rules but the script stressed a lot my system and all rules can't be processed by iptables sudo ./test_ufw_threads.py iptables: Resource temporarily unavailable. iptables: Resource temporarily unavailable. iptables: Resource temporarily unavailable. [...] Anyway, ufw stores only the last updates (in /lib/ufw/user.rules): sudo ufw status État : actif Vers Action Depuis -- -- 192.168.254.1 1234/tcp ALLOW 192.168.46.9 192.168.254.1 1234/tcp ALLOW 192.168.22.10 192.168.254.1 1234/tcp ALLOW 192.168.32.10 192.168.254.1 1234/tcp ALLOW 192.168.5.10 192.168.254.1 1234/tcp ALLOW 192.168.43.9 192.168.254.1 1234/tcp ALLOW 192.168.40.10 192.168.254.1 1234/tcp ALLOW 192.168.46.10 192.168.254.1 1234/tcp ALLOW 192.168.48.10 192.168.254.1 1234/tcp ALLOW 192.168.42.10 192.168.254.1 1234/tcp ALLOW 192.168.43.10 So I can't delete other rules using ufw, I had to directly use iptables. In this case I can only delete 10 rules using ufw. Could you please handle some kind of lock? To manage notifications about this bug go to: https://bugs.launchpad.net/ufw/+bug/1204579/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1204579] Re: ufw doesn't support concurrent updates
Tested this is fixed in cosmic: $ apt-cache policy ufw ufw: Installed: 0.36-0ubuntu0.18.10.1 Candidate: 0.36-0ubuntu0.18.10.1 Version table: *** 0.36-0ubuntu0.18.10.1 500 500 http://us.archive.ubuntu.com/ubuntu cosmic-proposed/main amd64 Packages 500 http://us.archive.ubuntu.com/ubuntu cosmic-proposed/main i386 Packages 100 /var/lib/dpkg/status 0.35-6 500 500 http://us.archive.ubuntu.com/ubuntu cosmic/main amd64 Packages 500 http://us.archive.ubuntu.com/ubuntu cosmic/main i386 Packages ** Tags removed: verification-needed-cosmic ** Tags added: verification-done-cosmic ** Tags removed: verification-needed verification-needed-bionic ** Tags added: verification-done verification-done-bionic -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to ufw in Ubuntu. https://bugs.launchpad.net/bugs/1204579 Title: ufw doesn't support concurrent updates Status in ufw: Fix Released Status in ufw package in Ubuntu: Fix Released Status in ufw source package in Bionic: Fix Committed Status in ufw source package in Cosmic: Fix Committed Status in ufw source package in Disco: Fix Released Status in ufw package in Debian: Fix Released Bug description: [Impact] ufw prior to 0.36 did not support locking or use xtables locking which can lead to problems when using ufw as a dynamic firewall. [Test Case] $ sudo apt-get install python-minimal # for the test script $ sudo ./test_ufw_threads.py # this runs for many seconds A patched ufw will complete with no errors. With an unpatched ufw, there will be many errors like: $ sudo ./test_ufw_threads.py ... ERROR: initcaps [Errno 2] iptables: Chain already exists. ERROR: initcaps [Errno 2] iptables: Chain already exists. [Regression Potential] ufw 0.36 implements a global exclusive lock before doing any kernel or file writes. Risk of regression includes the lock file not being released due to coding error. The locking is done via fcntl.lockf and ufw releases it in a finally clause that is careful to always release it. [Other Info] This locking code has been in production in the ufw snap for years and is known to work is static environments as well as in dynamic environments (IPS/fail2ban/etc). = Original description = On a server under Ubuntu 12.04 I automatically update firewall rules and I unfortunately noticed that if 2 rules are processed at the same time it leads to an inconsistent result between iptables and ufw status. In fact it can be reproduced using the python script in attachment. Before executing this script I didn't have any rules matching the ip 192.168.254.1 on my computer. After a launch iptables takes into acount 464 rules. sudo iptables -L -n | grep 192.168.254.1 | wc -l 464 It should be 500 rules but the script stressed a lot my system and all rules can't be processed by iptables sudo ./test_ufw_threads.py iptables: Resource temporarily unavailable. iptables: Resource temporarily unavailable. iptables: Resource temporarily unavailable. [...] Anyway, ufw stores only the last updates (in /lib/ufw/user.rules): sudo ufw status État : actif Vers Action Depuis -- -- 192.168.254.1 1234/tcp ALLOW 192.168.46.9 192.168.254.1 1234/tcp ALLOW 192.168.22.10 192.168.254.1 1234/tcp ALLOW 192.168.32.10 192.168.254.1 1234/tcp ALLOW 192.168.5.10 192.168.254.1 1234/tcp ALLOW 192.168.43.9 192.168.254.1 1234/tcp ALLOW 192.168.40.10 192.168.254.1 1234/tcp ALLOW 192.168.46.10 192.168.254.1 1234/tcp ALLOW 192.168.48.10 192.168.254.1 1234/tcp ALLOW 192.168.42.10 192.168.254.1 1234/tcp ALLOW 192.168.43.10 So I can't delete other rules using ufw, I had to directly use iptables. In this case I can only delete 10 rules using ufw. Could you please handle some kind of lock? To manage notifications about this bug go to: https://bugs.launchpad.net/ufw/+bug/1204579/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp