[Touch-packages] [Bug 1693056] Re: do-release-upgrade hangs at The user 'syslog' is already a member of 'adm' every single time
Ok, I got it: 1. purge rsyslog with: "sudo apt purge rsyslog" 2. Install the new distro with either "sudo apt dist-upgrade" or "do-release-upgrade" 3. I had one error in the first run of do-release-upgrade, I just re-ran it and now it went through and I'm on 17.04...profit? -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to rsyslog in Ubuntu. https://bugs.launchpad.net/bugs/1693056 Title: do-release-upgrade hangs at The user 'syslog' is already a member of 'adm' every single time Status in rsyslog package in Ubuntu: New Bug description: Uuntu 15.10 > $ sudo apt-cache policy rsyslog > rsyslog: > Installed: 8.12.0-1ubuntu2 > Candidate: 8.12.0-1ubuntu2 > Version table: > *** 8.12.0-1ubuntu2 0 > 500 http://ubuntu-archive.mirror.serveriai.lt/ubuntu/ wily/main amd64 Packages > 100 /var/lib/dpkg/status Whenever I try to run any command that is to reinstall/fix rsylog or try to upgrade my Ubuntu server (by running `do-release-upgrade`) it ends in: > Reading cache > > Checking package manager > > Setting up rsyslog (8.12.0-1ubuntu2) ... > The user 'syslog' is already a member of 'adm'. Because of this I am locked on **Ubuntu 15.10**. **Note**: I started getting this error after I upgraded from `15.04` when system was setting up after upgrade to `15.10`. I was asked to choose version and it said `N` for default or existing version and I went for it. What I expect: To peacefully upgrade my VPS Ubuntu version to 16.04. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/rsyslog/+bug/1693056/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1693056] Re: do-release-upgrade hangs at The user 'syslog' is already a member of 'adm' every single time
I have the same issue, but instead of "N" I chose "Y" (to replace rsyslog), which failed as well -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to rsyslog in Ubuntu. https://bugs.launchpad.net/bugs/1693056 Title: do-release-upgrade hangs at The user 'syslog' is already a member of 'adm' every single time Status in rsyslog package in Ubuntu: New Bug description: Uuntu 15.10 > $ sudo apt-cache policy rsyslog > rsyslog: > Installed: 8.12.0-1ubuntu2 > Candidate: 8.12.0-1ubuntu2 > Version table: > *** 8.12.0-1ubuntu2 0 > 500 http://ubuntu-archive.mirror.serveriai.lt/ubuntu/ wily/main amd64 Packages > 100 /var/lib/dpkg/status Whenever I try to run any command that is to reinstall/fix rsylog or try to upgrade my Ubuntu server (by running `do-release-upgrade`) it ends in: > Reading cache > > Checking package manager > > Setting up rsyslog (8.12.0-1ubuntu2) ... > The user 'syslog' is already a member of 'adm'. Because of this I am locked on **Ubuntu 15.10**. **Note**: I started getting this error after I upgraded from `15.04` when system was setting up after upgrade to `15.10`. I was asked to choose version and it said `N` for default or existing version and I went for it. What I expect: To peacefully upgrade my VPS Ubuntu version to 16.04. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/rsyslog/+bug/1693056/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1732416] Re: two cursors on dual screen setup
works fine now with the proprietary nvidia driver instead of nouveau -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to xorg in Ubuntu. https://bugs.launchpad.net/bugs/1732416 Title: two cursors on dual screen setup Status in xorg package in Ubuntu: Confirmed Bug description: My secondary monitor (in portrait mode) is left of the primary monitor. When I move the cursor into the top left corner of my primary, a second cursor will show up on my secondary screen. It has no function, its just there. The area is about 4cm x 10cm starting at the top left corner. The second cursor is rotated to the left. Doesn't happen if I move the secondary screen to the right of my primary. Disappears when I move the cursor onto second screen. ProblemType: Bug DistroRelease: Ubuntu 17.10 Package: xorg 1:7.7+19ubuntu3 ProcVersionSignature: Ubuntu 4.13.0-16.19-generic 4.13.4 Uname: Linux 4.13.0-16-generic x86_64 ApportVersion: 2.20.7-0ubuntu3.1 Architecture: amd64 CompositorRunning: None CurrentDesktop: ubuntu:GNOME Date: Wed Nov 15 12:12:20 2017 DistUpgraded: Fresh install DistroCodename: artful DistroVariant: ubuntu ExtraDebuggingInterest: Yes, if not too technical GraphicsCard: NVIDIA Corporation GP102 [GeForce GTX 1080 Ti] [10de:1b06] (rev a1) (prog-if 00 [VGA controller]) Subsystem: NVIDIA Corporation GP102 [GeForce GTX 1080 Ti] [10de:120f] InstallationDate: Installed on 2017-11-15 (0 days ago) InstallationMedia: Ubuntu 17.10 "Artful Aardvark" - Release amd64 (20171018) MachineType: To Be Filled By O.E.M. To Be Filled By O.E.M. ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-4.13.0-16-generic.efi.signed root=UUID=a2c4c090-f120-42fb-895f-11cfe3a2bfe4 ro quiet splash vt.handoff=7 SourcePackage: xorg Symptom: display UpgradeStatus: No upgrade log present (probably fresh install) dmi.bios.date: 10/27/2016 dmi.bios.vendor: American Megatrends Inc. dmi.bios.version: P1.10 dmi.board.name: Z270M-ITX/ac dmi.board.vendor: ASRock dmi.chassis.asset.tag: To Be Filled By O.E.M. dmi.chassis.type: 3 dmi.chassis.vendor: To Be Filled By O.E.M. dmi.chassis.version: To Be Filled By O.E.M. dmi.modalias: dmi:bvnAmericanMegatrendsInc.:bvrP1.10:bd10/27/2016:svnToBeFilledByO.E.M.:pnToBeFilledByO.E.M.:pvrToBeFilledByO.E.M.:rvnASRock:rnZ270M-ITX/ac:rvr:cvnToBeFilledByO.E.M.:ct3:cvrToBeFilledByO.E.M.: dmi.product.family: To Be Filled By O.E.M. dmi.product.name: To Be Filled By O.E.M. dmi.product.version: To Be Filled By O.E.M. dmi.sys.vendor: To Be Filled By O.E.M. version.compiz: compiz N/A version.libdrm2: libdrm2 2.4.83-1 version.libgl1-mesa-dri: libgl1-mesa-dri 17.2.2-0ubuntu1 version.libgl1-mesa-glx: libgl1-mesa-glx 17.2.2-0ubuntu1 version.xserver-xorg-core: xserver-xorg-core 2:1.19.5-0ubuntu2 version.xserver-xorg-input-evdev: xserver-xorg-input-evdev N/A version.xserver-xorg-video-ati: xserver-xorg-video-ati 1:7.10.0-1 version.xserver-xorg-video-intel: xserver-xorg-video-intel 2:2.99.917+git20170309-0ubuntu1 version.xserver-xorg-video-nouveau: xserver-xorg-video-nouveau 1:1.0.15-2 To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/xorg/+bug/1732416/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1732416] Re: two cursors on dual screen setup
or xorg instead of wayland... -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to xorg in Ubuntu. https://bugs.launchpad.net/bugs/1732416 Title: two cursors on dual screen setup Status in xorg package in Ubuntu: Confirmed Bug description: My secondary monitor (in portrait mode) is left of the primary monitor. When I move the cursor into the top left corner of my primary, a second cursor will show up on my secondary screen. It has no function, its just there. The area is about 4cm x 10cm starting at the top left corner. The second cursor is rotated to the left. Doesn't happen if I move the secondary screen to the right of my primary. Disappears when I move the cursor onto second screen. ProblemType: Bug DistroRelease: Ubuntu 17.10 Package: xorg 1:7.7+19ubuntu3 ProcVersionSignature: Ubuntu 4.13.0-16.19-generic 4.13.4 Uname: Linux 4.13.0-16-generic x86_64 ApportVersion: 2.20.7-0ubuntu3.1 Architecture: amd64 CompositorRunning: None CurrentDesktop: ubuntu:GNOME Date: Wed Nov 15 12:12:20 2017 DistUpgraded: Fresh install DistroCodename: artful DistroVariant: ubuntu ExtraDebuggingInterest: Yes, if not too technical GraphicsCard: NVIDIA Corporation GP102 [GeForce GTX 1080 Ti] [10de:1b06] (rev a1) (prog-if 00 [VGA controller]) Subsystem: NVIDIA Corporation GP102 [GeForce GTX 1080 Ti] [10de:120f] InstallationDate: Installed on 2017-11-15 (0 days ago) InstallationMedia: Ubuntu 17.10 "Artful Aardvark" - Release amd64 (20171018) MachineType: To Be Filled By O.E.M. To Be Filled By O.E.M. ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-4.13.0-16-generic.efi.signed root=UUID=a2c4c090-f120-42fb-895f-11cfe3a2bfe4 ro quiet splash vt.handoff=7 SourcePackage: xorg Symptom: display UpgradeStatus: No upgrade log present (probably fresh install) dmi.bios.date: 10/27/2016 dmi.bios.vendor: American Megatrends Inc. dmi.bios.version: P1.10 dmi.board.name: Z270M-ITX/ac dmi.board.vendor: ASRock dmi.chassis.asset.tag: To Be Filled By O.E.M. dmi.chassis.type: 3 dmi.chassis.vendor: To Be Filled By O.E.M. dmi.chassis.version: To Be Filled By O.E.M. dmi.modalias: dmi:bvnAmericanMegatrendsInc.:bvrP1.10:bd10/27/2016:svnToBeFilledByO.E.M.:pnToBeFilledByO.E.M.:pvrToBeFilledByO.E.M.:rvnASRock:rnZ270M-ITX/ac:rvr:cvnToBeFilledByO.E.M.:ct3:cvrToBeFilledByO.E.M.: dmi.product.family: To Be Filled By O.E.M. dmi.product.name: To Be Filled By O.E.M. dmi.product.version: To Be Filled By O.E.M. dmi.sys.vendor: To Be Filled By O.E.M. version.compiz: compiz N/A version.libdrm2: libdrm2 2.4.83-1 version.libgl1-mesa-dri: libgl1-mesa-dri 17.2.2-0ubuntu1 version.libgl1-mesa-glx: libgl1-mesa-glx 17.2.2-0ubuntu1 version.xserver-xorg-core: xserver-xorg-core 2:1.19.5-0ubuntu2 version.xserver-xorg-input-evdev: xserver-xorg-input-evdev N/A version.xserver-xorg-video-ati: xserver-xorg-video-ati 1:7.10.0-1 version.xserver-xorg-video-intel: xserver-xorg-video-intel 2:2.99.917+git20170309-0ubuntu1 version.xserver-xorg-video-nouveau: xserver-xorg-video-nouveau 1:1.0.15-2 To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/xorg/+bug/1732416/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1732416] [NEW] two cursors on dual screen setup
Public bug reported: My secondary monitor (in portrait mode) is left of the primary monitor. When I move the cursor into the top left corner of my primary, a second cursor will show up on my secondary screen. It has no function, its just there. The area is about 4cm x 10cm starting at the top left corner. The second cursor is rotated to the left. Doesn't happen if I move the secondary screen to the right of my primary. Disappears when I move the cursor onto second screen. ProblemType: Bug DistroRelease: Ubuntu 17.10 Package: xorg 1:7.7+19ubuntu3 ProcVersionSignature: Ubuntu 4.13.0-16.19-generic 4.13.4 Uname: Linux 4.13.0-16-generic x86_64 ApportVersion: 2.20.7-0ubuntu3.1 Architecture: amd64 CompositorRunning: None CurrentDesktop: ubuntu:GNOME Date: Wed Nov 15 12:12:20 2017 DistUpgraded: Fresh install DistroCodename: artful DistroVariant: ubuntu ExtraDebuggingInterest: Yes, if not too technical GraphicsCard: NVIDIA Corporation GP102 [GeForce GTX 1080 Ti] [10de:1b06] (rev a1) (prog-if 00 [VGA controller]) Subsystem: NVIDIA Corporation GP102 [GeForce GTX 1080 Ti] [10de:120f] InstallationDate: Installed on 2017-11-15 (0 days ago) InstallationMedia: Ubuntu 17.10 "Artful Aardvark" - Release amd64 (20171018) MachineType: To Be Filled By O.E.M. To Be Filled By O.E.M. ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-4.13.0-16-generic.efi.signed root=UUID=a2c4c090-f120-42fb-895f-11cfe3a2bfe4 ro quiet splash vt.handoff=7 SourcePackage: xorg Symptom: display UpgradeStatus: No upgrade log present (probably fresh install) dmi.bios.date: 10/27/2016 dmi.bios.vendor: American Megatrends Inc. dmi.bios.version: P1.10 dmi.board.name: Z270M-ITX/ac dmi.board.vendor: ASRock dmi.chassis.asset.tag: To Be Filled By O.E.M. dmi.chassis.type: 3 dmi.chassis.vendor: To Be Filled By O.E.M. dmi.chassis.version: To Be Filled By O.E.M. dmi.modalias: dmi:bvnAmericanMegatrendsInc.:bvrP1.10:bd10/27/2016:svnToBeFilledByO.E.M.:pnToBeFilledByO.E.M.:pvrToBeFilledByO.E.M.:rvnASRock:rnZ270M-ITX/ac:rvr:cvnToBeFilledByO.E.M.:ct3:cvrToBeFilledByO.E.M.: dmi.product.family: To Be Filled By O.E.M. dmi.product.name: To Be Filled By O.E.M. dmi.product.version: To Be Filled By O.E.M. dmi.sys.vendor: To Be Filled By O.E.M. version.compiz: compiz N/A version.libdrm2: libdrm2 2.4.83-1 version.libgl1-mesa-dri: libgl1-mesa-dri 17.2.2-0ubuntu1 version.libgl1-mesa-glx: libgl1-mesa-glx 17.2.2-0ubuntu1 version.xserver-xorg-core: xserver-xorg-core 2:1.19.5-0ubuntu2 version.xserver-xorg-input-evdev: xserver-xorg-input-evdev N/A version.xserver-xorg-video-ati: xserver-xorg-video-ati 1:7.10.0-1 version.xserver-xorg-video-intel: xserver-xorg-video-intel 2:2.99.917+git20170309-0ubuntu1 version.xserver-xorg-video-nouveau: xserver-xorg-video-nouveau 1:1.0.15-2 ** Affects: xorg (Ubuntu) Importance: Undecided Status: New ** Tags: amd64 apport-bug artful ubuntu wayland-session -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to xorg in Ubuntu. https://bugs.launchpad.net/bugs/1732416 Title: two cursors on dual screen setup Status in xorg package in Ubuntu: New Bug description: My secondary monitor (in portrait mode) is left of the primary monitor. When I move the cursor into the top left corner of my primary, a second cursor will show up on my secondary screen. It has no function, its just there. The area is about 4cm x 10cm starting at the top left corner. The second cursor is rotated to the left. Doesn't happen if I move the secondary screen to the right of my primary. Disappears when I move the cursor onto second screen. ProblemType: Bug DistroRelease: Ubuntu 17.10 Package: xorg 1:7.7+19ubuntu3 ProcVersionSignature: Ubuntu 4.13.0-16.19-generic 4.13.4 Uname: Linux 4.13.0-16-generic x86_64 ApportVersion: 2.20.7-0ubuntu3.1 Architecture: amd64 CompositorRunning: None CurrentDesktop: ubuntu:GNOME Date: Wed Nov 15 12:12:20 2017 DistUpgraded: Fresh install DistroCodename: artful DistroVariant: ubuntu ExtraDebuggingInterest: Yes, if not too technical GraphicsCard: NVIDIA Corporation GP102 [GeForce GTX 1080 Ti] [10de:1b06] (rev a1) (prog-if 00 [VGA controller]) Subsystem: NVIDIA Corporation GP102 [GeForce GTX 1080 Ti] [10de:120f] InstallationDate: Installed on 2017-11-15 (0 days ago) InstallationMedia: Ubuntu 17.10 "Artful Aardvark" - Release amd64 (20171018) MachineType: To Be Filled By O.E.M. To Be Filled By O.E.M. ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-4.13.0-16-generic.efi.signed root=UUID=a2c4c090-f120-42fb-895f-11cfe3a2bfe4 ro quiet splash vt.handoff=7 SourcePackage: xorg Symptom: display UpgradeStatus: No upgrade log present (probably fresh install) dmi.bios.date: 10/27/2016 dmi.bios.vendor: American Megatrends Inc. dmi.bios.version: P1.10 dmi.board.name: Z270M-ITX/ac dmi.board.vendor: ASRock dmi.chassis.asset.tag: To Be Filled By O.E.M. dmi.chassis.type: 3 dmi.chassis.vendor: To Be Filled By
[Touch-packages] [Bug 1132736] Re: Xorg fails to start after installing the Hardware Enablement Stack due to missing symlink after purging old xserver-xorg
This bug is still valid for the xenial stack... -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to xorg in Ubuntu. https://bugs.launchpad.net/bugs/1132736 Title: Xorg fails to start after installing the Hardware Enablement Stack due to missing symlink after purging old xserver-xorg Status in xorg package in Ubuntu: Triaged Status in xorg-lts-trusty package in Ubuntu: Confirmed Status in xorg-lts-utopic package in Ubuntu: Confirmed Status in xorg-lts-vivid package in Ubuntu: Fix Released Bug description: Bug: The bug happens whenever the remaining configuration files of the original X stack is removed, ie purging. It does not happen for users who do not explicitly remove those. Workaround: For example, if upgraded 14.04 LTS to the 14.04.2 HWE stack (=14.10/utopic): sudo dpkg-reconfigure xserver-xorg-lts-utopic This restores the symlink /etc/X11/X -> /usr/bin/Xorg --- After installing the hardware enablement stack on precise by running: sudo apt-get install linux-generic-lts-quantal xserver-xorg-lts-quantal Xorg fail to start. There is no error message or anything, just a black screen. Switching to a vt i possible and lightdm/x-0.log shows that a symlink is missing: X: cannot stat /etc/X11/X (No such file or directory), aborting. I updates two computers running precise x86_64 and both had the problem. Just recreating the symlink fixes the problem and then precise runs perfectly fine with the new stack (in fact, it's more stable so far). To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/xorg/+bug/1132736/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1539879] [NEW] package lvm2 2.02.133-1ubuntu4 failed to install/upgrade: Unterprozess installiertes post-installation-Skript gab den Fehlerwert 1 zurück
Public bug reported: My Ubuntu Verison: Description:Ubuntu Xenial Xerus (development branch) Release:16.04 I just made a fresh install and then an "apt update" and an "apt dist- upgrade" - Benedikt ProblemType: Package DistroRelease: Ubuntu 16.04 Package: lvm2 2.02.133-1ubuntu4 ProcVersionSignature: Ubuntu 4.3.0-7.18-generic 4.3.3 Uname: Linux 4.3.0-7-generic x86_64 ApportVersion: 2.19.4-0ubuntu1 Architecture: amd64 Date: Sat Jan 30 11:01:27 2016 ErrorMessage: Unterprozess installiertes post-installation-Skript gab den Fehlerwert 1 zurück InstallationDate: Installed on 2016-01-30 (0 days ago) InstallationMedia: Ubuntu 16.04 LTS "Xenial Xerus" - Alpha amd64 (20160127) RelatedPackageVersions: dpkg 1.18.4ubuntu1 apt 1.1.10 SourcePackage: lvm2 Title: package lvm2 2.02.133-1ubuntu4 failed to install/upgrade: Unterprozess installiertes post-installation-Skript gab den Fehlerwert 1 zurück UpgradeStatus: No upgrade log present (probably fresh install) ** Affects: lvm2 (Ubuntu) Importance: Undecided Status: New ** Tags: amd64 apport-package xenial -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to lvm2 in Ubuntu. https://bugs.launchpad.net/bugs/1539879 Title: package lvm2 2.02.133-1ubuntu4 failed to install/upgrade: Unterprozess installiertes post-installation-Skript gab den Fehlerwert 1 zurück Status in lvm2 package in Ubuntu: New Bug description: My Ubuntu Verison: Description: Ubuntu Xenial Xerus (development branch) Release: 16.04 I just made a fresh install and then an "apt update" and an "apt dist- upgrade" - Benedikt ProblemType: Package DistroRelease: Ubuntu 16.04 Package: lvm2 2.02.133-1ubuntu4 ProcVersionSignature: Ubuntu 4.3.0-7.18-generic 4.3.3 Uname: Linux 4.3.0-7-generic x86_64 ApportVersion: 2.19.4-0ubuntu1 Architecture: amd64 Date: Sat Jan 30 11:01:27 2016 ErrorMessage: Unterprozess installiertes post-installation-Skript gab den Fehlerwert 1 zurück InstallationDate: Installed on 2016-01-30 (0 days ago) InstallationMedia: Ubuntu 16.04 LTS "Xenial Xerus" - Alpha amd64 (20160127) RelatedPackageVersions: dpkg 1.18.4ubuntu1 apt 1.1.10 SourcePackage: lvm2 Title: package lvm2 2.02.133-1ubuntu4 failed to install/upgrade: Unterprozess installiertes post-installation-Skript gab den Fehlerwert 1 zurück UpgradeStatus: No upgrade log present (probably fresh install) To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/lvm2/+bug/1539879/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1485316] [NEW] dnsmasq breaks DNS, if not used as DNS server
Public bug reported: I use dnsmasq mainly as a TFTP/DHCP combination and disable the part of the dns-resolver. So i use codeport=0/code to disable the DNS part. But the init- script always rewrites the resolv.conf, no matter if DNS is actually used. Could you add an option to the defaults-file, which the init-script checks and dependent on this, rewrites the config-file? ** Affects: dnsmasq (Ubuntu) Importance: Undecided Status: New -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to dnsmasq in Ubuntu. https://bugs.launchpad.net/bugs/1485316 Title: dnsmasq breaks DNS, if not used as DNS server Status in dnsmasq package in Ubuntu: New Bug description: I use dnsmasq mainly as a TFTP/DHCP combination and disable the part of the dns-resolver. So i use codeport=0/code to disable the DNS part. But the init- script always rewrites the resolv.conf, no matter if DNS is actually used. Could you add an option to the defaults-file, which the init-script checks and dependent on this, rewrites the config-file? To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/dnsmasq/+bug/1485316/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1317449]
Created attachment 93046 New crash information added by DrKonqi digikam (4.0.0) on KDE Platform 4.14.2 using Qt 4.8.6 Selecting a picture in an album It reproduces sometimes and is not related to any specific album. -- Backtrace (Reduced): #7 0x7fe71a6d7dac in sqlite3MemCompare (pMem1=pMem1@entry=0x7fffc4a3c1f0, pMem2=optimized out, pColl=0x10d01118) at sqlite3.c:60484 #8 0x7fe71a6d7f63 in sqlite3VdbeRecordCompare (nKey1=18, pKey1=0x7fe7041e026f, pPKey2=pPKey2@entry=0x7fffc4a3c4f0) at sqlite3.c:64162 #9 0x7fe71a6ec579 in sqlite3BtreeMovetoUnpacked (pCur=0x110cfed0, pIdxKey=0x7fffc4a3c4f0, intKey=0, biasRight=optimized out, pRes=0x7fffc4a3c4e0) at sqlite3.c:55077 #10 0x7fe71a7149c5 in sqlite3VdbeExec (p=p@entry=0x1226c408) at sqlite3.c:70168 #11 0x7fe71a71ced7 in sqlite3Step (p=0x1226c408) at sqlite3.c:64828 -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to sqlite3 in Ubuntu. https://bugs.launchpad.net/bugs/1317449 Title: sqlite3 version 3.8.2 breaks digikam Status in digiKam - digital photo management: Won't Fix Status in SQLite: Won't Fix Status in digikam package in Ubuntu: Fix Released Status in sqlite3 package in Ubuntu: Fix Released Status in digikam source package in Trusty: Confirmed Status in sqlite3 source package in Trusty: Confirmed Status in digikam source package in Utopic: Fix Released Status in sqlite3 source package in Utopic: Fix Released Bug description: Please update sqlite to a version 3.8.2. According to https://bugs.kde.org/show_bug.cgi?id=329697 sqlite3 version 3.8.2 causes crashes in digikam (and possibly other software) in various situations. Several reports confirm, that versions 3.8.2 fix the issue. I'm using the 3.8.4.3 package from debian testing right now and can't trigger crashes anymore. Workaround: Install sqlite3 3.8.2, e.g. you can manually install the corresponding deb packages from either utopic or debian. To manage notifications about this bug go to: https://bugs.launchpad.net/digikam/+bug/1317449/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1317449]
Created attachment 92487 New crash information added by DrKonqi digikam (4.0.0) on KDE Platform 4.14.2 using Qt 4.8.6 - What I was doing when the application crashed: Upon selecting a new album digiKam crashes 5 times out of 10. This happens especially when the album I just selected is stil generating thumbnails. -- Backtrace (Reduced): #6 0x7f9ac91d0da9 in sqlite3MemCompare (pMem1=pMem1@entry=0x7fff2e5c2b90, pMem2=optimized out, pColl=0x137c098) at sqlite3.c:60484 #7 0x7f9ac91d0f63 in sqlite3VdbeRecordCompare (nKey1=18, pKey1=0x7f9ab411c1af, pPKey2=pPKey2@entry=0x7fff2e5c2e90) at sqlite3.c:64162 #8 0x7f9ac91e5579 in sqlite3BtreeMovetoUnpacked (pCur=0x430c220, pIdxKey=0x7fff2e5c2e90, intKey=0, biasRight=optimized out, pRes=0x7fff2e5c2e80) at sqlite3.c:55077 #9 0x7f9ac920d9c5 in sqlite3VdbeExec (p=p@entry=0x500ebe8) at sqlite3.c:70168 #10 0x7f9ac9215ed7 in sqlite3Step (p=0x500ebe8) at sqlite3.c:64828 -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to sqlite3 in Ubuntu. https://bugs.launchpad.net/bugs/1317449 Title: sqlite3 version 3.8.2 breaks digikam Status in digiKam - digital photo management: Won't Fix Status in SQLite: Won't Fix Status in digikam package in Ubuntu: Fix Released Status in sqlite3 package in Ubuntu: Fix Released Status in digikam source package in Trusty: Confirmed Status in sqlite3 source package in Trusty: Confirmed Status in digikam source package in Utopic: Fix Released Status in sqlite3 source package in Utopic: Fix Released Bug description: Please update sqlite to a version 3.8.2. According to https://bugs.kde.org/show_bug.cgi?id=329697 sqlite3 version 3.8.2 causes crashes in digikam (and possibly other software) in various situations. Several reports confirm, that versions 3.8.2 fix the issue. I'm using the 3.8.4.3 package from debian testing right now and can't trigger crashes anymore. Workaround: Install sqlite3 3.8.2, e.g. you can manually install the corresponding deb packages from either utopic or debian. To manage notifications about this bug go to: https://bugs.launchpad.net/digikam/+bug/1317449/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1317449]
(In reply to Christoph Feck from comment #134) Ben, and you also get these crashes if you upgrade sqlite3 package to version 3.8.4 or newer, as is suggested in the comments of this bug report? I did update sqlite3 to the latest version available on my distro. The crash still happens, on a less regular bases though. It happens mainly when am switching albums while the album I am in still loads thumbnails. -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to sqlite3 in Ubuntu. https://bugs.launchpad.net/bugs/1317449 Title: sqlite3 version 3.8.2 breaks digikam Status in digiKam - digital photo management: Won't Fix Status in SQLite: Won't Fix Status in digikam package in Ubuntu: Fix Released Status in sqlite3 package in Ubuntu: Fix Released Status in digikam source package in Trusty: Confirmed Status in sqlite3 source package in Trusty: Confirmed Status in digikam source package in Utopic: Fix Released Status in sqlite3 source package in Utopic: Fix Released Bug description: Please update sqlite to a version 3.8.2. According to https://bugs.kde.org/show_bug.cgi?id=329697 sqlite3 version 3.8.2 causes crashes in digikam (and possibly other software) in various situations. Several reports confirm, that versions 3.8.2 fix the issue. I'm using the 3.8.4.3 package from debian testing right now and can't trigger crashes anymore. Workaround: Install sqlite3 3.8.2, e.g. you can manually install the corresponding deb packages from either utopic or debian. To manage notifications about this bug go to: https://bugs.launchpad.net/digikam/+bug/1317449/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1439687] Re: Can not report bug: SSL Certificate Verify Failure
Ok I think it was my fault. I had not installed the python-sso-client package ** Changed in: apport (Ubuntu) Status: New = Invalid ** Changed in: whoopsie (Ubuntu) Status: New = Invalid -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to apport in Ubuntu. https://bugs.launchpad.net/bugs/1439687 Title: Can not report bug: SSL Certificate Verify Failure Status in apport package in Ubuntu: Invalid Status in whoopsie package in Ubuntu: Invalid Bug description: I called apport with apport-bug linux, because I wanted to report a kernel bug. However I could not send the logs to launchpad because of the following error message: urlopen error [SSL: CERTIFICATE_VERIFY_FAILED] certificate verify failed (_ssl.c:600) Distribution: Kubuntu 15.04 64 Bit To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/apport/+bug/1439687/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1440501] Re: Can not load mysql-akonadi apparmor profile
** Tags added: systemd-boot -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to apparmor in Ubuntu. https://bugs.launchpad.net/bugs/1440501 Title: Can not load mysql-akonadi apparmor profile Status in akonadi package in Ubuntu: New Status in apparmor package in Ubuntu: New Bug description: Apparmor fails to start witch exit code 123, because it can not load the mysql-akonadi profile: % sudo systemctl status apparmor -l ● apparmor.service - LSB: AppArmor initialization Loaded: loaded (/etc/init.d/apparmor) Active: failed (Result: exit-code) since So 2015-04-05 12:29:33 CEST; 55s ago Docs: man:systemd-sysv-generator(8) Process: 13906 ExecStart=/etc/init.d/apparmor start (code=exited, status=123) Apr 05 12:29:33 benediktZ50-70 apparmor[13906]: Skipping profile in /etc/apparmor.d/disable: usr.bin.firefox Apr 05 12:29:33 benediktZ50-70 apparmor[13906]: AppArmor parser error for /etc/apparmor.d/usr.sbin.mysqld-akonadi in /etc/apparmor.d/usr.sbin.mysqld-akonadi at line 31: Could not open 'local/usr.sbin.mysqld-akonadi' Apr 05 12:29:33 benediktZ50-70 apparmor[13906]: Skipping profile in /etc/apparmor.d/disable: usr.bin.firefox Apr 05 12:29:33 benediktZ50-70 apparmor[13906]: Skipping profile in /etc/apparmor.d/disable: usr.sbin.rsyslogd Apr 05 12:29:33 benediktZ50-70 apparmor[13906]: AppArmor parser error for /etc/apparmor.d/usr.sbin.mysqld-akonadi in /etc/apparmor.d/usr.sbin.mysqld-akonadi at line 31: Could not open 'local/usr.sbin.mysqld-akonadi' Apr 05 12:29:33 benediktZ50-70 apparmor[13906]: ...fail! Apr 05 12:29:33 benediktZ50-70 systemd[1]: apparmor.service: control process exited, code=exited status=123 Apr 05 12:29:33 benediktZ50-70 systemd[1]: Failed to start LSB: AppArmor initialization. Apr 05 12:29:33 benediktZ50-70 systemd[1]: Unit apparmor.service entered failed state. Apr 05 12:29:33 benediktZ50-70 systemd[1]: apparmor.service failed. However Apparmor loaded successfully: % sudo aa-status apparmor module is loaded. 17 profiles are loaded. 17 profiles are in enforce mode. /sbin/dhclient /usr/lib/NetworkManager/nm-dhcp-client.action /usr/lib/NetworkManager/nm-dhcp-helper /usr/lib/connman/scripts/dhclient-script /usr/lib/cups/backend/cups-pdf /usr/lib/libvirt/virt-aa-helper /usr/lib/telepathy/mission-control-5 /usr/lib/telepathy/telepathy-* /usr/lib/telepathy/telepathy-*//pxgsettings /usr/lib/telepathy/telepathy-*//sanitized_helper /usr/lib/telepathy/telepathy-ofono /usr/sbin/cups-browsed /usr/sbin/cupsd /usr/sbin/cupsd//third_party /usr/sbin/libvirtd /usr/sbin/tcpdump docker-default 0 profiles are in complain mode. 5 processes have profiles defined. 5 processes are in enforce mode. /sbin/dhclient (11821) /usr/lib/telepathy/mission-control-5 (2008) /usr/sbin/cups-browsed (840) /usr/sbin/cupsd (12783) /usr/sbin/libvirtd (971) 0 processes are in complain mode. 0 processes are unconfined but have a profile defined. It is really necessary to set Apparmor as failed if one profile could not be loaded? To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/akonadi/+bug/1440501/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1440501] [NEW] Can not load mysql-akonadi apparmor profile
Public bug reported: Apparmor fails to start witch exit code 123, because it can not load the mysql-akonadi profile: % sudo systemctl status apparmor -l ● apparmor.service - LSB: AppArmor initialization Loaded: loaded (/etc/init.d/apparmor) Active: failed (Result: exit-code) since So 2015-04-05 12:29:33 CEST; 55s ago Docs: man:systemd-sysv-generator(8) Process: 13906 ExecStart=/etc/init.d/apparmor start (code=exited, status=123) Apr 05 12:29:33 benediktZ50-70 apparmor[13906]: Skipping profile in /etc/apparmor.d/disable: usr.bin.firefox Apr 05 12:29:33 benediktZ50-70 apparmor[13906]: AppArmor parser error for /etc/apparmor.d/usr.sbin.mysqld-akonadi in /etc/apparmor.d/usr.sbin.mysqld-akonadi at line 31: Could not open 'local/usr.sbin.mysqld-akonadi' Apr 05 12:29:33 benediktZ50-70 apparmor[13906]: Skipping profile in /etc/apparmor.d/disable: usr.bin.firefox Apr 05 12:29:33 benediktZ50-70 apparmor[13906]: Skipping profile in /etc/apparmor.d/disable: usr.sbin.rsyslogd Apr 05 12:29:33 benediktZ50-70 apparmor[13906]: AppArmor parser error for /etc/apparmor.d/usr.sbin.mysqld-akonadi in /etc/apparmor.d/usr.sbin.mysqld-akonadi at line 31: Could not open 'local/usr.sbin.mysqld-akonadi' Apr 05 12:29:33 benediktZ50-70 apparmor[13906]: ...fail! Apr 05 12:29:33 benediktZ50-70 systemd[1]: apparmor.service: control process exited, code=exited status=123 Apr 05 12:29:33 benediktZ50-70 systemd[1]: Failed to start LSB: AppArmor initialization. Apr 05 12:29:33 benediktZ50-70 systemd[1]: Unit apparmor.service entered failed state. Apr 05 12:29:33 benediktZ50-70 systemd[1]: apparmor.service failed. However Apparmor loaded successfully: % sudo aa-status apparmor module is loaded. 17 profiles are loaded. 17 profiles are in enforce mode. /sbin/dhclient /usr/lib/NetworkManager/nm-dhcp-client.action /usr/lib/NetworkManager/nm-dhcp-helper /usr/lib/connman/scripts/dhclient-script /usr/lib/cups/backend/cups-pdf /usr/lib/libvirt/virt-aa-helper /usr/lib/telepathy/mission-control-5 /usr/lib/telepathy/telepathy-* /usr/lib/telepathy/telepathy-*//pxgsettings /usr/lib/telepathy/telepathy-*//sanitized_helper /usr/lib/telepathy/telepathy-ofono /usr/sbin/cups-browsed /usr/sbin/cupsd /usr/sbin/cupsd//third_party /usr/sbin/libvirtd /usr/sbin/tcpdump docker-default 0 profiles are in complain mode. 5 processes have profiles defined. 5 processes are in enforce mode. /sbin/dhclient (11821) /usr/lib/telepathy/mission-control-5 (2008) /usr/sbin/cups-browsed (840) /usr/sbin/cupsd (12783) /usr/sbin/libvirtd (971) 0 processes are in complain mode. 0 processes are unconfined but have a profile defined. It is really necessary to set Apparmor as failed if one profile could not be loaded? ** Affects: akonadi (Ubuntu) Importance: Undecided Status: New ** Affects: apparmor (Ubuntu) Importance: Undecided Status: New ** Tags: kubuntu vivid ** Also affects: akonadi (Ubuntu) Importance: Undecided Status: New ** Tags added: kubuntu vivid ** Summary changed: - Can not load mysql-akonadi profile + Can not load mysql-akonadi apparmor profile -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to apparmor in Ubuntu. https://bugs.launchpad.net/bugs/1440501 Title: Can not load mysql-akonadi apparmor profile Status in akonadi package in Ubuntu: New Status in apparmor package in Ubuntu: New Bug description: Apparmor fails to start witch exit code 123, because it can not load the mysql-akonadi profile: % sudo systemctl status apparmor -l ● apparmor.service - LSB: AppArmor initialization Loaded: loaded (/etc/init.d/apparmor) Active: failed (Result: exit-code) since So 2015-04-05 12:29:33 CEST; 55s ago Docs: man:systemd-sysv-generator(8) Process: 13906 ExecStart=/etc/init.d/apparmor start (code=exited, status=123) Apr 05 12:29:33 benediktZ50-70 apparmor[13906]: Skipping profile in /etc/apparmor.d/disable: usr.bin.firefox Apr 05 12:29:33 benediktZ50-70 apparmor[13906]: AppArmor parser error for /etc/apparmor.d/usr.sbin.mysqld-akonadi in /etc/apparmor.d/usr.sbin.mysqld-akonadi at line 31: Could not open 'local/usr.sbin.mysqld-akonadi' Apr 05 12:29:33 benediktZ50-70 apparmor[13906]: Skipping profile in /etc/apparmor.d/disable: usr.bin.firefox Apr 05 12:29:33 benediktZ50-70 apparmor[13906]: Skipping profile in /etc/apparmor.d/disable: usr.sbin.rsyslogd Apr 05 12:29:33 benediktZ50-70 apparmor[13906]: AppArmor parser error for /etc/apparmor.d/usr.sbin.mysqld-akonadi in /etc/apparmor.d/usr.sbin.mysqld-akonadi at line 31: Could not open 'local/usr.sbin.mysqld-akonadi' Apr 05 12:29:33 benediktZ50-70 apparmor[13906]: ...fail! Apr 05 12:29:33 benediktZ50-70 systemd[1]: apparmor.service: control process exited, code=exited status=123 Apr 05 12:29:33 benediktZ50-70 systemd[1]: Failed to start LSB:
[Touch-packages] [Bug 1439687] Re: Can not report bug: SSL Certificate Verify Failure
It seems it also affects whoopsie: Apr 4 17:17:34 benediktZ50-70 whoopsie[784]: [17:17:34] Parsing /var/crash/_usr_share_apport_apport-kde.1000.crash. Apr 4 17:17:34 benediktZ50-70 whoopsie[784]: [17:17:34] Uploading /var/crash/_usr_share_apport_apport-kde.1000.crash. Apr 4 17:17:34 benediktZ50-70 whoopsie[784]: [17:17:34] Sent; server replied with: Peer certificate cannot be authenticated with given CA certificates Apr 4 17:17:34 benediktZ50-70 whoopsie[784]: [17:17:34] Response code: 0 ** Also affects: whoopsie Importance: Undecided Status: New ** Project changed: apport = apport (Ubuntu) ** Project changed: whoopsie = whoopsie (Ubuntu) ** Tags added: kubuntu vivid -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to apport in Ubuntu. https://bugs.launchpad.net/bugs/1439687 Title: Can not report bug: SSL Certificate Verify Failure Status in apport package in Ubuntu: New Status in whoopsie package in Ubuntu: New Bug description: I called apport with apport-bug linux, because I wanted to report a kernel bug. However I could not send the logs to launchpad because of the following error message: urlopen error [SSL: CERTIFICATE_VERIFY_FAILED] certificate verify failed (_ssl.c:600) Distribution: Kubuntu 15.04 64 Bit To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/apport/+bug/1439687/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1432158] Re: network-manager 0.9.10.0-4ubuntu10 makes my system take about twice as long to boot to the login screen
** Tags added: systemd-boot -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to network-manager in Ubuntu. https://bugs.launchpad.net/bugs/1432158 Title: network-manager 0.9.10.0-4ubuntu10 makes my system take about twice as long to boot to the login screen Status in network-manager package in Ubuntu: New Status in sddm package in Ubuntu: New Bug description: The enablement of NetworkManager-wait-online.service in network- manager 0.9.10.0-4ubuntu10 has made my Kubuntu Vivid x64 system take nearly twice as long to boot to the login screen. I did some investigating and determined that this is because sddm.service depends on systemd-user-sessions.service which depends on remote-fs.target which depends on network-online.target which depends on NetworkManager-wait-online.service. For that reason, systemd is apparently waiting to start sddm until both the wired and wireless adapters are connected, which makes the system take much longer to boot. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/network-manager/+bug/1432158/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1431107] Re: ordering cycles with early boot rcS scripts with inappropriate rc2.d links
$ systemctl show --no-pager -p After apparmor After=system.slice systemd-journald.socket local-fs.target and: $ systemctl list-dependencies local-fs.target local-fs.target ● ├─-.mount ● ├─boot-efi.mount ● ├─home.mount ● ├─systemd-fsck-root.service ● └─systemd-remount-fs.service I think this is another bug that only shows the same symptoms as this bug. Could you please confirm this, before I open a new bug? ** Attachment added: debug.txt https://bugs.launchpad.net/ubuntu/+source/systemd/+bug/1431107/+attachment/4346988/+files/debug.txt -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to systemd in Ubuntu. https://bugs.launchpad.net/bugs/1431107 Title: ordering cycles with early boot rcS scripts with inappropriate rc2.d links Status in systemd package in Ubuntu: Triaged Bug description: After switching to systemd, the AppArmor service often fails to start on boot. This seems to happen at least 50% of the times I turn on the system. If I attempt to start the process again after the system is otherwise finished booting, it works fine. I also have another system with the same software configuration but a much slower storage system (HDD instead of SSD) which never suffers from this problem, so I think it is probably a race condition. If I do systemctl status apparmor, I get the following output: michael@mamarley-laptop:~$ sudo systemctl status apparmor ● apparmor.service - LSB: AppArmor initialization Loaded: loaded (/etc/init.d/apparmor) Active: failed (Result: exit-code) since Wed 2015-03-11 21:25:44 EDT; 1min 5s ago Docs: man:systemd-sysv-generator(8) Process: 237 ExecStart=/etc/init.d/apparmor start (code=exited, status=123) Mar 11 21:25:44 mamarley-laptop apparmor[237]: Skipping profile in /etc/apparmor.d/disable: usr.bin.firefox Mar 11 21:25:44 mamarley-laptop apparmor[237]: mkstemp: Read-only file system Mar 11 21:25:44 mamarley-laptop apparmor[237]: Skipping profile in /etc/apparmor.d/disable: usr.sbin.rsyslogd Mar 11 21:25:44 mamarley-laptop apparmor[237]: Skipping profile in /etc/apparmor.d/disable: usr.bin.firefox Mar 11 21:25:44 mamarley-laptop apparmor[237]: Skipping profile in /etc/apparmor.d/disable: usr.sbin.rsyslogd Mar 11 21:25:44 mamarley-laptop systemd[1]: apparmor.service: control process exited, code=exited status=123 Mar 11 21:25:44 mamarley-laptop apparmor[237]: ...fail! Mar 11 21:25:44 mamarley-laptop systemd[1]: Failed to start LSB: AppArmor initialization. Mar 11 21:25:44 mamarley-laptop systemd[1]: Unit apparmor.service entered failed state. Mar 11 21:25:44 mamarley-laptop systemd[1]: apparmor.service failed. ProblemType: Bug DistroRelease: Ubuntu 15.04 Package: systemd 219-4ubuntu5 ProcVersionSignature: Ubuntu 3.19.0-9.9-lowlatency 3.19.1 Uname: Linux 3.19.0-9-lowlatency x86_64 NonfreeKernelModules: nvidia ApportVersion: 2.16.2-0ubuntu2 Architecture: amd64 CurrentDesktop: KDE Date: Wed Mar 11 21:30:08 2015 InstallationDate: Installed on 2014-06-01 (283 days ago) InstallationMedia: Kubuntu 14.04 LTS Trusty Tahr - Release amd64 (20140416.1) MachineType: LENOVO 2359CTO ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.19.0-9-lowlatency root=UUID=1f7829ef-ffb8-4182-ac92-40d613ea78c9 ro elevator=deadline intel_pstate=enable acpi_osi=Windows 2012 SourcePackage: systemd UpgradeStatus: No upgrade log present (probably fresh install) dmi.bios.date: 08/21/2014 dmi.bios.vendor: LENOVO dmi.bios.version: G4ETA2WW (2.62 ) dmi.board.asset.tag: Not Available dmi.board.name: 2359CTO dmi.board.vendor: LENOVO dmi.board.version: Not Defined dmi.chassis.asset.tag: No Asset Information dmi.chassis.type: 10 dmi.chassis.vendor: LENOVO dmi.chassis.version: Not Available dmi.modalias: dmi:bvnLENOVO:bvrG4ETA2WW(2.62):bd08/21/2014:svnLENOVO:pn2359CTO:pvrThinkPadT530:rvnLENOVO:rn2359CTO:rvrNotDefined:cvnLENOVO:ct10:cvrNotAvailable: dmi.product.name: 2359CTO dmi.product.version: ThinkPad T530 dmi.sys.vendor: LENOVO To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/systemd/+bug/1431107/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1431107] Re: ordering cycles with early boot rcS scripts with inappropriate rc2.d links
Hi Martin, I think I can reproduce the appaprmor failure on every boot: $ systemctl status apparmor.service -l ● apparmor.service - LSB: AppArmor initialization Loaded: loaded (/etc/init.d/apparmor) Active: failed (Result: exit-code) since So 2015-03-15 22:42:54 CET; 12h ago Docs: man:systemd-sysv-generator(8) Process: 543 ExecStart=/etc/init.d/apparmor start (code=exited, status=123) Mär 15 22:42:54 benediktZ50-70 apparmor[543]: Skipping profile in /etc/apparmor.d/disable: usr.bin.firefox Mär 15 22:42:54 benediktZ50-70 apparmor[543]: AppArmor parser error for /etc/apparmor.d/usr.sbin.mysqld-akonadi in /etc/apparmor.d/usr.sbin.mysqld-akonadi at line 31: Could not open 'local/usr.sbin.mysqld-akonadi' Mär 15 22:42:54 benediktZ50-70 apparmor[543]: Skipping profile in /etc/apparmor.d/disable: usr.bin.firefox Mär 15 22:42:54 benediktZ50-70 apparmor[543]: AppArmor parser error for /etc/apparmor.d/usr.sbin.mysqld-akonadi in /etc/apparmor.d/usr.sbin.mysqld-akonadi at line 31: Could not open 'local/usr.sbin.mysqld-akonadi' Mär 15 22:42:54 benediktZ50-70 apparmor[543]: Skipping profile in /etc/apparmor.d/disable: usr.sbin.rsyslogd Mär 15 22:42:54 benediktZ50-70 apparmor[543]: ...fail! Mär 15 22:42:54 benediktZ50-70 systemd[1]: apparmor.service: control process exited, code=exited status=123 Mär 15 22:42:54 benediktZ50-70 systemd[1]: Failed to start LSB: AppArmor initialization. Mär 15 22:42:54 benediktZ50-70 systemd[1]: Unit apparmor.service entered failed state. Mär 15 22:42:54 benediktZ50-70 systemd[1]: apparmor.service failed. However I have only one symlink in rcS: ls -l /etc/rc*/*lvm2 lrwxrwxrwx 1 root root 14 Dez 21 01:18 /etc/rcS.d/S08lvm2 - ../init.d/lvm2 I will now try a debug boot. System: Kubuntu 15.04 -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to systemd in Ubuntu. https://bugs.launchpad.net/bugs/1431107 Title: ordering cycles with early boot rcS scripts with inappropriate rc2.d links Status in systemd package in Ubuntu: Triaged Bug description: After switching to systemd, the AppArmor service often fails to start on boot. This seems to happen at least 50% of the times I turn on the system. If I attempt to start the process again after the system is otherwise finished booting, it works fine. I also have another system with the same software configuration but a much slower storage system (HDD instead of SSD) which never suffers from this problem, so I think it is probably a race condition. If I do systemctl status apparmor, I get the following output: michael@mamarley-laptop:~$ sudo systemctl status apparmor ● apparmor.service - LSB: AppArmor initialization Loaded: loaded (/etc/init.d/apparmor) Active: failed (Result: exit-code) since Wed 2015-03-11 21:25:44 EDT; 1min 5s ago Docs: man:systemd-sysv-generator(8) Process: 237 ExecStart=/etc/init.d/apparmor start (code=exited, status=123) Mar 11 21:25:44 mamarley-laptop apparmor[237]: Skipping profile in /etc/apparmor.d/disable: usr.bin.firefox Mar 11 21:25:44 mamarley-laptop apparmor[237]: mkstemp: Read-only file system Mar 11 21:25:44 mamarley-laptop apparmor[237]: Skipping profile in /etc/apparmor.d/disable: usr.sbin.rsyslogd Mar 11 21:25:44 mamarley-laptop apparmor[237]: Skipping profile in /etc/apparmor.d/disable: usr.bin.firefox Mar 11 21:25:44 mamarley-laptop apparmor[237]: Skipping profile in /etc/apparmor.d/disable: usr.sbin.rsyslogd Mar 11 21:25:44 mamarley-laptop systemd[1]: apparmor.service: control process exited, code=exited status=123 Mar 11 21:25:44 mamarley-laptop apparmor[237]: ...fail! Mar 11 21:25:44 mamarley-laptop systemd[1]: Failed to start LSB: AppArmor initialization. Mar 11 21:25:44 mamarley-laptop systemd[1]: Unit apparmor.service entered failed state. Mar 11 21:25:44 mamarley-laptop systemd[1]: apparmor.service failed. ProblemType: Bug DistroRelease: Ubuntu 15.04 Package: systemd 219-4ubuntu5 ProcVersionSignature: Ubuntu 3.19.0-9.9-lowlatency 3.19.1 Uname: Linux 3.19.0-9-lowlatency x86_64 NonfreeKernelModules: nvidia ApportVersion: 2.16.2-0ubuntu2 Architecture: amd64 CurrentDesktop: KDE Date: Wed Mar 11 21:30:08 2015 InstallationDate: Installed on 2014-06-01 (283 days ago) InstallationMedia: Kubuntu 14.04 LTS Trusty Tahr - Release amd64 (20140416.1) MachineType: LENOVO 2359CTO ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.19.0-9-lowlatency root=UUID=1f7829ef-ffb8-4182-ac92-40d613ea78c9 ro elevator=deadline intel_pstate=enable acpi_osi=Windows 2012 SourcePackage: systemd UpgradeStatus: No upgrade log present (probably fresh install) dmi.bios.date: 08/21/2014 dmi.bios.vendor: LENOVO dmi.bios.version: G4ETA2WW (2.62 ) dmi.board.asset.tag: Not Available dmi.board.name: 2359CTO dmi.board.vendor: LENOVO dmi.board.version: Not Defined dmi.chassis.asset.tag: No Asset Information dmi.chassis.type:
[Touch-packages] [Bug 1425959] [NEW] System sounds are always at 100% volume
Public bug reported: Problem is reproducible since the pulseaudio update to version 6.0. If an error message or system message appears with a warning sound, the sound volume goes up to 100%. Muting system sounds does not help. Example: Try to open a file with xdg-open that does not exist. A error message with a loud sound will appear. The sound volume will be at 100% ( It does not matter if it was muted before). ProblemType: Bug DistroRelease: Ubuntu 15.04 Package: pulseaudio 1:6.0-0ubuntu3 ProcVersionSignature: Ubuntu 3.18.0-13.14-generic 3.18.5 Uname: Linux 3.18.0-13-generic x86_64 NonfreeKernelModules: nvidia ApportVersion: 2.16.1-0ubuntu2 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/pcmC1D0p: benedikt 1990 F...m pulseaudio /dev/snd/controlC1: benedikt 1990 F pulseaudio /dev/snd/controlC0: benedikt 1990 F pulseaudio CurrentDesktop: KDE Date: Thu Feb 26 14:59:15 2015 InstallationDate: Installed on 2014-12-21 (67 days ago) InstallationMedia: Kubuntu 15.04 Vivid Vervet - Alpha amd64 (20141218) SourcePackage: pulseaudio UpgradeStatus: No upgrade log present (probably fresh install) dmi.bios.date: 10/20/2014 dmi.bios.vendor: LENOVO dmi.bios.version: 9BCN29WW dmi.board.asset.tag: No Asset Tag dmi.board.name: Lancer 5A5 dmi.board.vendor: LENOVO dmi.board.version: 31900058WIN dmi.chassis.asset.tag: No Asset Tag dmi.chassis.type: 10 dmi.chassis.vendor: LENOVO dmi.chassis.version: Lenovo Z50-70 dmi.modalias: dmi:bvnLENOVO:bvr9BCN29WW:bd10/20/2014:svnLENOVO:pn20354:pvrLenovoZ50-70:rvnLENOVO:rnLancer5A5:rvr31900058WIN:cvnLENOVO:ct10:cvrLenovoZ50-70: dmi.product.name: 20354 dmi.product.version: Lenovo Z50-70 dmi.sys.vendor: LENOVO ** Affects: pulseaudio (Ubuntu) Importance: Undecided Status: New ** Tags: amd64 apport-bug vivid -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to pulseaudio in Ubuntu. https://bugs.launchpad.net/bugs/1425959 Title: System sounds are always at 100% volume Status in pulseaudio package in Ubuntu: New Bug description: Problem is reproducible since the pulseaudio update to version 6.0. If an error message or system message appears with a warning sound, the sound volume goes up to 100%. Muting system sounds does not help. Example: Try to open a file with xdg-open that does not exist. A error message with a loud sound will appear. The sound volume will be at 100% ( It does not matter if it was muted before). ProblemType: Bug DistroRelease: Ubuntu 15.04 Package: pulseaudio 1:6.0-0ubuntu3 ProcVersionSignature: Ubuntu 3.18.0-13.14-generic 3.18.5 Uname: Linux 3.18.0-13-generic x86_64 NonfreeKernelModules: nvidia ApportVersion: 2.16.1-0ubuntu2 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/pcmC1D0p: benedikt 1990 F...m pulseaudio /dev/snd/controlC1: benedikt 1990 F pulseaudio /dev/snd/controlC0: benedikt 1990 F pulseaudio CurrentDesktop: KDE Date: Thu Feb 26 14:59:15 2015 InstallationDate: Installed on 2014-12-21 (67 days ago) InstallationMedia: Kubuntu 15.04 Vivid Vervet - Alpha amd64 (20141218) SourcePackage: pulseaudio UpgradeStatus: No upgrade log present (probably fresh install) dmi.bios.date: 10/20/2014 dmi.bios.vendor: LENOVO dmi.bios.version: 9BCN29WW dmi.board.asset.tag: No Asset Tag dmi.board.name: Lancer 5A5 dmi.board.vendor: LENOVO dmi.board.version: 31900058WIN dmi.chassis.asset.tag: No Asset Tag dmi.chassis.type: 10 dmi.chassis.vendor: LENOVO dmi.chassis.version: Lenovo Z50-70 dmi.modalias: dmi:bvnLENOVO:bvr9BCN29WW:bd10/20/2014:svnLENOVO:pn20354:pvrLenovoZ50-70:rvnLENOVO:rnLancer5A5:rvr31900058WIN:cvnLENOVO:ct10:cvrLenovoZ50-70: dmi.product.name: 20354 dmi.product.version: Lenovo Z50-70 dmi.sys.vendor: LENOVO To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/pulseaudio/+bug/1425959/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1390767] [NEW] trying to overwrite shared '/usr/share/man/man1/freetype-config.1.gz', which is different from other instances of package libfreetype6-dev:i386
Public bug reported: When installing libfreetype6-dev:i386 on a 64-bit machine: Unpacking libfreetype6-dev:i386 (2.5.2-2ubuntu1) ... dpkg: error processing archive /var/cache/apt/archives/libfreetype6-dev_2.5.2-2ubuntu1_i386.deb (--unpack): trying to overwrite shared '/usr/share/man/man1/freetype-config.1.gz', which is different from other instances of package libfreetype6-dev:i386 dpkg-deb: error: subprocess paste was killed by signal (Broken pipe) Moving the /usr/share/man/man1/freetype-config.1.gz out of the way allows the package to install sucessfully. This is only a manual page conflict, as it seems. ProblemType: Package DistroRelease: Ubuntu 14.10 Package: libfreetype6-dev 2.5.2-2ubuntu1 ProcVersionSignature: Ubuntu 3.16.0-24.32-generic 3.16.4 Uname: Linux 3.16.0-24-generic x86_64 ApportVersion: 2.14.7-0ubuntu8 AptOrdering: libpng12-dev: Install libfreetype6-dev: Install libpng12-dev: Configure libfreetype6-dev: Configure Architecture: amd64 Date: Sat Nov 8 17:45:08 2014 DuplicateSignature: package:libfreetype6-dev:2.5.2-2ubuntu1:trying to overwrite shared '/usr/share/man/man1/freetype-config.1.gz', which is different from other instances of package libfreetype6-dev:i386 ErrorMessage: trying to overwrite shared '/usr/share/man/man1/freetype-config.1.gz', which is different from other instances of package libfreetype6-dev:i386 InstallationDate: Installed on 2013-11-03 (369 days ago) InstallationMedia: Ubuntu 13.10 Saucy Salamander - Release amd64 (20131016.1) SourcePackage: freetype Title: package libfreetype6-dev 2.5.2-2ubuntu1 failed to install/upgrade: trying to overwrite shared '/usr/share/man/man1/freetype-config.1.gz', which is different from other instances of package libfreetype6-dev:i386 UpgradeStatus: Upgraded to utopic on 2014-11-05 (2 days ago) ** Affects: freetype (Ubuntu) Importance: Undecided Status: New ** Tags: amd64 apport-package package-conflict utopic -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to freetype in Ubuntu. https://bugs.launchpad.net/bugs/1390767 Title: trying to overwrite shared '/usr/share/man/man1/freetype-config.1.gz', which is different from other instances of package libfreetype6-dev:i386 Status in “freetype” package in Ubuntu: New Bug description: When installing libfreetype6-dev:i386 on a 64-bit machine: Unpacking libfreetype6-dev:i386 (2.5.2-2ubuntu1) ... dpkg: error processing archive /var/cache/apt/archives/libfreetype6-dev_2.5.2-2ubuntu1_i386.deb (--unpack): trying to overwrite shared '/usr/share/man/man1/freetype-config.1.gz', which is different from other instances of package libfreetype6-dev:i386 dpkg-deb: error: subprocess paste was killed by signal (Broken pipe) Moving the /usr/share/man/man1/freetype-config.1.gz out of the way allows the package to install sucessfully. This is only a manual page conflict, as it seems. ProblemType: Package DistroRelease: Ubuntu 14.10 Package: libfreetype6-dev 2.5.2-2ubuntu1 ProcVersionSignature: Ubuntu 3.16.0-24.32-generic 3.16.4 Uname: Linux 3.16.0-24-generic x86_64 ApportVersion: 2.14.7-0ubuntu8 AptOrdering: libpng12-dev: Install libfreetype6-dev: Install libpng12-dev: Configure libfreetype6-dev: Configure Architecture: amd64 Date: Sat Nov 8 17:45:08 2014 DuplicateSignature: package:libfreetype6-dev:2.5.2-2ubuntu1:trying to overwrite shared '/usr/share/man/man1/freetype-config.1.gz', which is different from other instances of package libfreetype6-dev:i386 ErrorMessage: trying to overwrite shared '/usr/share/man/man1/freetype-config.1.gz', which is different from other instances of package libfreetype6-dev:i386 InstallationDate: Installed on 2013-11-03 (369 days ago) InstallationMedia: Ubuntu 13.10 Saucy Salamander - Release amd64 (20131016.1) SourcePackage: freetype Title: package libfreetype6-dev 2.5.2-2ubuntu1 failed to install/upgrade: trying to overwrite shared '/usr/share/man/man1/freetype-config.1.gz', which is different from other instances of package libfreetype6-dev:i386 UpgradeStatus: Upgraded to utopic on 2014-11-05 (2 days ago) To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/freetype/+bug/1390767/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1348940] [NEW] square in the left upper corner of the dash
Public bug reported: every time i want to start a programm from the dash i see this square in the left upper corner, i think its a graphic glitch ProblemType: Bug DistroRelease: Ubuntu 14.04 Package: xorg 1:7.7+1ubuntu8 Uname: Linux 3.15.0-031500-generic x86_64 .tmp.unity.support.test.0: ApportVersion: 2.14.1-0ubuntu3.2 Architecture: amd64 CompizPlugins: No value set for `/apps/compiz-1/general/screen0/options/active_plugins' CompositorRunning: compiz CompositorUnredirectDriverBlacklist: '(nouveau|Intel).*Mesa 8.0' CompositorUnredirectFSW: true CurrentDesktop: Unity Date: Sat Jul 26 17:01:48 2014 DistUpgraded: Fresh install DistroCodename: trusty DistroVariant: ubuntu DkmsStatus: vboxhost, 4.3.14, 3.13.0-32-generic, x86_64: installed vboxhost, 4.3.14, 3.15.0-031500-generic, x86_64: installed GraphicsCard: Intel Corporation 3rd Gen Core processor Graphics Controller [8086:0166] (rev 09) (prog-if 00 [VGA controller]) Subsystem: Dell Device [1028:058b] InstallationDate: Installed on 2014-05-31 (56 days ago) InstallationMedia: Ubuntu 14.04 LTS Trusty Tahr - Release amd64 (20140417) MachineType: Dell Inc. XPS L322X ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.15.0-031500-generic root=UUID=11613522-e8b1-44ff-bf65-2c5ea7d100bd ro quiet splash vt.handoff=7 SourcePackage: xorg Symptom: display UpgradeStatus: No upgrade log present (probably fresh install) dmi.bios.date: 08/28/2013 dmi.bios.vendor: Dell Inc. dmi.bios.version: A10 dmi.board.name: 0PJHXN dmi.board.vendor: Dell Inc. dmi.board.version: A00 dmi.chassis.type: 8 dmi.chassis.vendor: Dell Inc. dmi.chassis.version: 0.1 dmi.modalias: dmi:bvnDellInc.:bvrA10:bd08/28/2013:svnDellInc.:pnXPSL322X:pvr:rvnDellInc.:rn0PJHXN:rvrA00:cvnDellInc.:ct8:cvr0.1: dmi.product.name: XPS L322X dmi.sys.vendor: Dell Inc. version.compiz: compiz 1:0.9.11.2+14.04.20140714-0ubuntu1 version.ia32-libs: ia32-libs N/A version.libdrm2: libdrm2 2.4.54+git1407160630.c0b34d~gd~t version.libgl1-mesa-dri: libgl1-mesa-dri 10.3~git1407250730.cce581~gd~t version.libgl1-mesa-dri-experimental: libgl1-mesa-dri-experimental N/A version.libgl1-mesa-glx: libgl1-mesa-glx 10.3~git1407250730.cce581~gd~t version.xserver-xorg-core: xserver-xorg-core 2:1.15.1-0ubuntu2 version.xserver-xorg-input-evdev: xserver-xorg-input-evdev 1:2.8.2-1ubuntu2 version.xserver-xorg-video-ati: xserver-xorg-video-ati 1:7.4.99+git1407010730.c4ae0e~gd~t version.xserver-xorg-video-intel: xserver-xorg-video-intel 2:2.99.914+git1407241931.cac154~gd~t version.xserver-xorg-video-nouveau: xserver-xorg-video-nouveau 1:1.0.10+git1407030730.edd160~gd~t xserver.bootTime: Sat Jul 26 16:32:14 2014 xserver.configfile: /etc/X11/xorg.conf xserver.errors: intel: Failed to load module dri3 (module does not exist, 0) intel: Failed to load module present (module does not exist, 0) xserver.logfile: /var/log/Xorg.0.log xserver.outputs: product id4933 vendor CMN xserver.version: 2:1.15.1-0ubuntu2 ** Affects: xorg (Ubuntu) Importance: Undecided Status: New ** Tags: amd64 apport-bug compiz-0.9 corruption third-party-packages trusty ubuntu ** Attachment added: graphic glitch https://bugs.launchpad.net/bugs/1348940/+attachment/4163320/+files/Bildschirmfoto%20vom%202014-07-26%2016%3A53%3A17.png -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to xorg in Ubuntu. https://bugs.launchpad.net/bugs/1348940 Title: square in the left upper corner of the dash Status in “xorg” package in Ubuntu: New Bug description: every time i want to start a programm from the dash i see this square in the left upper corner, i think its a graphic glitch ProblemType: Bug DistroRelease: Ubuntu 14.04 Package: xorg 1:7.7+1ubuntu8 Uname: Linux 3.15.0-031500-generic x86_64 .tmp.unity.support.test.0: ApportVersion: 2.14.1-0ubuntu3.2 Architecture: amd64 CompizPlugins: No value set for `/apps/compiz-1/general/screen0/options/active_plugins' CompositorRunning: compiz CompositorUnredirectDriverBlacklist: '(nouveau|Intel).*Mesa 8.0' CompositorUnredirectFSW: true CurrentDesktop: Unity Date: Sat Jul 26 17:01:48 2014 DistUpgraded: Fresh install DistroCodename: trusty DistroVariant: ubuntu DkmsStatus: vboxhost, 4.3.14, 3.13.0-32-generic, x86_64: installed vboxhost, 4.3.14, 3.15.0-031500-generic, x86_64: installed GraphicsCard: Intel Corporation 3rd Gen Core processor Graphics Controller [8086:0166] (rev 09) (prog-if 00 [VGA controller]) Subsystem: Dell Device [1028:058b] InstallationDate: Installed on 2014-05-31 (56 days ago) InstallationMedia: Ubuntu 14.04 LTS Trusty Tahr - Release amd64 (20140417) MachineType: Dell Inc. XPS L322X ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.15.0-031500-generic root=UUID=11613522-e8b1-44ff-bf65-2c5ea7d100bd ro quiet splash vt.handoff=7 SourcePackage: xorg Symptom: display UpgradeStatus: No upgrade log
