[Touch-packages] [Bug 2061214] Re: [SRU] Software Sources is not compatible with deb822
Tested Lubuntu Noble ISO dated 24-04-2024 and the bug no longer present. Also tested upgrades from Lubuntu Jammy and Lubuntu Mantic to Lubuntu Noble using GUI and also TUI and bug not present. -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to software-properties in Ubuntu. https://bugs.launchpad.net/bugs/2061214 Title: [SRU] Software Sources is not compatible with deb822 Status in software-properties package in Ubuntu: Confirmed Status in software-properties source package in Noble: Confirmed Bug description: [ Impact ] Ubuntu 24.04 now uses deb822 to represent software sources for deb packages, instead of /etc/apt/sources.list. The complete rationale for this change can be found here: https://discourse.ubuntu.com/t/spec- apt-deb822-sources-by-default/29333 software-properties has two graphical frontends for editing these software sources, one is GTK-based and the other is Qt-based. When the underlying change to deb822 sources was made, the GTK-based frontend and the DBus backend interface gained support. The original bug report shown below informed us of the lack of deb822 support in the Qt frontend, which results in a broken, non-functional interface when attempting to view or edit most values on the first two tabs. The fix for this is to implement a Qt dialog for deb822 sources that somewhat matches the existing GTK interface. [ Test Plan ] Install software-properties-qt 0.99.48 or earlier. Reproducing the bug: 1. From the menu, open Software Sources. Alternatively, run `sudo -E software-properties-qt` in a terminal. 2. Observe that all four checkboxes on the Ubuntu Software tab (main, universe, restricted, and multiverse) are unchecked. 3. Move to the Other Software tab and observe that there are no items in the list. Upgrade to software-properties-qt 0.99.49. Intended functionality: 1. From the menu, open Software Sources. Alternatively, run `sudo -E software-properties-qt` in a terminal. 2. Observe that one or more checkboxes on the Ubuntu Software tab (representing main, universe, restricted, or multiverse) are checked. Toggle one or more of the checkboxes. 3. Using a text editor of some kind (perhaps Vim), confirm that /etc/apt/sources.list.d/ubuntu.sources reflects your changes. 4. Switch to the Other Software tab, there should be one item in the list. 5. Select that item, then click Edit at the bottom of the dialog. Make a modification to every field on the screen, or a combination of fields you would like to test. All fields should work. 6. Click the OK button at the bottom of the dialog to confirm the changes, then click Edit for that item again. The changes you made should be reflected (meaning, the changes were saved.) 7. Using a text editor of some kind (perhaps Vim), confirm that /etc/apt/sources.list.d/ubuntu.sources reflects your changes. [ Where problems could occur ] This is well-tested code. That being said, the following small edge cases exist: - If you create a very large amount of rows, it infinitely expands the dialog without a scroll wheel. This is the same functionality as the GTK frontend. - Error validation is not performed on the deb822 lines, they are simply written to the ubuntu.sources file. This is good as a starting point, but also relies on the appropriate update notifier handling these errors. This is the same functionality as the GTK frontend. In a future update, this functionality could be broken by one or more of the following underlying changes: - Changes to the software-properties backend which are only implemented for the GTK frontend. - Changes to the location or formatting of the ubuntu.sources file. - Regressions in the Python bindings for Qt 5, which are rare but possible. - Regressions in Python itself. [ Other Info ] Ubuntu Studio's live ISO and installed system are affected by this. Only Lubuntu's installed system is affected by this. [ Original Report ] Upgrading Lubuntu Jammy to Lubuntu Noble using TUI results in "Software sources" not correctly updated after upgrade. Prompt= shows normal and not LTS Used command sudo do-release-upgrade -d Otherwise the upgrade is good see attached screenshot ProblemType: Bug DistroRelease: Ubuntu 24.04 Package: software-properties-common 0.99.46 ProcVersionSignature: Ubuntu 6.8.0-22.22-generic 6.8.1 Uname: Linux 6.8.0-22-generic x86_64 ApportVersion: 2.28.0-0ubuntu1 Architecture: amd64 CasperMD5CheckResult: unknown CurrentDesktop: LXQt Date: Sat Apr 13 11:44:28 2024 InstallationDate: Installed on 2024-04-13 (0 days ago) InstallationMedia: Lubuntu 22.04.4 LTS "Jammy Jellyfish" - Release amd64 (20240331) PackageArchitecture: all SourcePackage: software-properties UpgradeStatus: Upgraded to noble on 2024-04-13 (0 days ago) mtime.conffile..etc.init.d.apport: 2024
[Touch-packages] [Bug 2061214] Re: Software sources not correctly updated after upgrade and/or new installs
This also occurs after upgrading Lubuntu Mantic to Lubuntu Noble Test results: https://iso.qa.ubuntu.com/qatracker/milestones/450/builds/299391/testcases/1310/results ** Tags added: mantic -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to software-properties in Ubuntu. https://bugs.launchpad.net/bugs/2061214 Title: Software sources not correctly updated after upgrade and/or new installs Status in software-properties package in Ubuntu: New Bug description: Upgrading Lubuntu Jammy to Lubuntu Noble using TUI results in "Software sources" not correctly updated after upgrade. Prompt= shows normal and not LTS Used command sudo do-release-upgrade -d Otherwise the upgrade is good see attached screenshot ProblemType: Bug DistroRelease: Ubuntu 24.04 Package: software-properties-common 0.99.46 ProcVersionSignature: Ubuntu 6.8.0-22.22-generic 6.8.1 Uname: Linux 6.8.0-22-generic x86_64 ApportVersion: 2.28.0-0ubuntu1 Architecture: amd64 CasperMD5CheckResult: unknown CurrentDesktop: LXQt Date: Sat Apr 13 11:44:28 2024 InstallationDate: Installed on 2024-04-13 (0 days ago) InstallationMedia: Lubuntu 22.04.4 LTS "Jammy Jellyfish" - Release amd64 (20240331) PackageArchitecture: all SourcePackage: software-properties UpgradeStatus: Upgraded to noble on 2024-04-13 (0 days ago) mtime.conffile..etc.init.d.apport: 2024-02-22T14:20:00 To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/software-properties/+bug/2061214/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 2061214] Re: Software sources not correctly updated after upgrade and/or new installs
** Summary changed: - Software sources not correctly updated after upgrade + Software sources not correctly updated after upgrade and/or new installs -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to software-properties in Ubuntu. https://bugs.launchpad.net/bugs/2061214 Title: Software sources not correctly updated after upgrade and/or new installs Status in software-properties package in Ubuntu: New Bug description: Upgrading Lubuntu Jammy to Lubuntu Noble using TUI results in "Software sources" not correctly updated after upgrade. Prompt= shows normal and not LTS Used command sudo do-release-upgrade -d Otherwise the upgrade is good see attached screenshot ProblemType: Bug DistroRelease: Ubuntu 24.04 Package: software-properties-common 0.99.46 ProcVersionSignature: Ubuntu 6.8.0-22.22-generic 6.8.1 Uname: Linux 6.8.0-22-generic x86_64 ApportVersion: 2.28.0-0ubuntu1 Architecture: amd64 CasperMD5CheckResult: unknown CurrentDesktop: LXQt Date: Sat Apr 13 11:44:28 2024 InstallationDate: Installed on 2024-04-13 (0 days ago) InstallationMedia: Lubuntu 22.04.4 LTS "Jammy Jellyfish" - Release amd64 (20240331) PackageArchitecture: all SourcePackage: software-properties UpgradeStatus: Upgraded to noble on 2024-04-13 (0 days ago) mtime.conffile..etc.init.d.apport: 2024-02-22T14:20:00 To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/software-properties/+bug/2061214/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 2061214] Re: Software sources not correctly updated after upgrade
This is also present after installing latest Lubuntu Noble iso dated 20240418 my test results here : https://iso.qa.ubuntu.com/qatracker/milestones/450/builds/299825/testcases/1701/results -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to software-properties in Ubuntu. https://bugs.launchpad.net/bugs/2061214 Title: Software sources not correctly updated after upgrade Status in software-properties package in Ubuntu: New Bug description: Upgrading Lubuntu Jammy to Lubuntu Noble using TUI results in "Software sources" not correctly updated after upgrade. Prompt= shows normal and not LTS Used command sudo do-release-upgrade -d Otherwise the upgrade is good see attached screenshot ProblemType: Bug DistroRelease: Ubuntu 24.04 Package: software-properties-common 0.99.46 ProcVersionSignature: Ubuntu 6.8.0-22.22-generic 6.8.1 Uname: Linux 6.8.0-22-generic x86_64 ApportVersion: 2.28.0-0ubuntu1 Architecture: amd64 CasperMD5CheckResult: unknown CurrentDesktop: LXQt Date: Sat Apr 13 11:44:28 2024 InstallationDate: Installed on 2024-04-13 (0 days ago) InstallationMedia: Lubuntu 22.04.4 LTS "Jammy Jellyfish" - Release amd64 (20240331) PackageArchitecture: all SourcePackage: software-properties UpgradeStatus: Upgraded to noble on 2024-04-13 (0 days ago) mtime.conffile..etc.init.d.apport: 2024-02-22T14:20:00 To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/software-properties/+bug/2061214/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 2061214] Re: Software sources not correctly updated after upgrade
@juliank Julian attached is tarbell as requested ** Attachment added: "sources.tar" https://bugs.launchpad.net/ubuntu/+source/software-properties/+bug/2061214/+attachment/5767540/+files/sources.tar -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to software-properties in Ubuntu. https://bugs.launchpad.net/bugs/2061214 Title: Software sources not correctly updated after upgrade Status in software-properties package in Ubuntu: Incomplete Bug description: Upgrading Lubuntu Jammy to Lubuntu Noble using TUI results in "Software sources" not correctly updated after upgrade. Prompt= shows normal and not LTS Used command sudo do-release-upgrade -d Otherwise the upgrade is good see attached screenshot ProblemType: Bug DistroRelease: Ubuntu 24.04 Package: software-properties-common 0.99.46 ProcVersionSignature: Ubuntu 6.8.0-22.22-generic 6.8.1 Uname: Linux 6.8.0-22-generic x86_64 ApportVersion: 2.28.0-0ubuntu1 Architecture: amd64 CasperMD5CheckResult: unknown CurrentDesktop: LXQt Date: Sat Apr 13 11:44:28 2024 InstallationDate: Installed on 2024-04-13 (0 days ago) InstallationMedia: Lubuntu 22.04.4 LTS "Jammy Jellyfish" - Release amd64 (20240331) PackageArchitecture: all SourcePackage: software-properties UpgradeStatus: Upgraded to noble on 2024-04-13 (0 days ago) mtime.conffile..etc.init.d.apport: 2024-02-22T14:20:00 To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/software-properties/+bug/2061214/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 2061214] Re: Software sources not correctly updated after upgrade
Further .. looking a bit closer - "automatic updates" are checked and maybe that should suffice? -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to software-properties in Ubuntu. https://bugs.launchpad.net/bugs/2061214 Title: Software sources not correctly updated after upgrade Status in software-properties package in Ubuntu: New Bug description: Upgrading Lubuntu Jammy to Lubuntu Noble using TUI results in "Software sources" not correctly updated after upgrade. Prompt= shows normal and not LTS Used command sudo do-release-upgrade -d Otherwise the upgrade is good see attached screenshot ProblemType: Bug DistroRelease: Ubuntu 24.04 Package: software-properties-common 0.99.46 ProcVersionSignature: Ubuntu 6.8.0-22.22-generic 6.8.1 Uname: Linux 6.8.0-22-generic x86_64 ApportVersion: 2.28.0-0ubuntu1 Architecture: amd64 CasperMD5CheckResult: unknown CurrentDesktop: LXQt Date: Sat Apr 13 11:44:28 2024 InstallationDate: Installed on 2024-04-13 (0 days ago) InstallationMedia: Lubuntu 22.04.4 LTS "Jammy Jellyfish" - Release amd64 (20240331) PackageArchitecture: all SourcePackage: software-properties UpgradeStatus: Upgraded to noble on 2024-04-13 (0 days ago) mtime.conffile..etc.init.d.apport: 2024-02-22T14:20:00 To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/software-properties/+bug/2061214/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 2061214] Re: Software sources not correctly updated after upgrade
Tested again 18-04-2024 upgarde from Lubuntu Jammy to Lubuntu Noble and this still not correct. As in above screenshot the "software sources" shows unchecked boxes (downloadable software )under "Ubuntu Software". However Prompt now shows LTS which is correct. -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to software-properties in Ubuntu. https://bugs.launchpad.net/bugs/2061214 Title: Software sources not correctly updated after upgrade Status in software-properties package in Ubuntu: New Bug description: Upgrading Lubuntu Jammy to Lubuntu Noble using TUI results in "Software sources" not correctly updated after upgrade. Prompt= shows normal and not LTS Used command sudo do-release-upgrade -d Otherwise the upgrade is good see attached screenshot ProblemType: Bug DistroRelease: Ubuntu 24.04 Package: software-properties-common 0.99.46 ProcVersionSignature: Ubuntu 6.8.0-22.22-generic 6.8.1 Uname: Linux 6.8.0-22-generic x86_64 ApportVersion: 2.28.0-0ubuntu1 Architecture: amd64 CasperMD5CheckResult: unknown CurrentDesktop: LXQt Date: Sat Apr 13 11:44:28 2024 InstallationDate: Installed on 2024-04-13 (0 days ago) InstallationMedia: Lubuntu 22.04.4 LTS "Jammy Jellyfish" - Release amd64 (20240331) PackageArchitecture: all SourcePackage: software-properties UpgradeStatus: Upgraded to noble on 2024-04-13 (0 days ago) mtime.conffile..etc.init.d.apport: 2024-02-22T14:20:00 To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/software-properties/+bug/2061214/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 2061214] Re: Software sources not correctly updated after upgrade
** Description changed: Upgrading Lubuntu Jammy to Lubuntu Noble using TUI results in "Software sources" not correctly updated after upgrade. Prompt= shows normal and not LTS + + Used command sudo do-release-upgrade -d Otherwise the upgrade is good see attached screenshot ProblemType: Bug DistroRelease: Ubuntu 24.04 Package: software-properties-common 0.99.46 ProcVersionSignature: Ubuntu 6.8.0-22.22-generic 6.8.1 Uname: Linux 6.8.0-22-generic x86_64 ApportVersion: 2.28.0-0ubuntu1 Architecture: amd64 CasperMD5CheckResult: unknown CurrentDesktop: LXQt Date: Sat Apr 13 11:44:28 2024 InstallationDate: Installed on 2024-04-13 (0 days ago) InstallationMedia: Lubuntu 22.04.4 LTS "Jammy Jellyfish" - Release amd64 (20240331) PackageArchitecture: all SourcePackage: software-properties UpgradeStatus: Upgraded to noble on 2024-04-13 (0 days ago) mtime.conffile..etc.init.d.apport: 2024-02-22T14:20:00 -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to software-properties in Ubuntu. https://bugs.launchpad.net/bugs/2061214 Title: Software sources not correctly updated after upgrade Status in software-properties package in Ubuntu: New Bug description: Upgrading Lubuntu Jammy to Lubuntu Noble using TUI results in "Software sources" not correctly updated after upgrade. Prompt= shows normal and not LTS Used command sudo do-release-upgrade -d Otherwise the upgrade is good see attached screenshot ProblemType: Bug DistroRelease: Ubuntu 24.04 Package: software-properties-common 0.99.46 ProcVersionSignature: Ubuntu 6.8.0-22.22-generic 6.8.1 Uname: Linux 6.8.0-22-generic x86_64 ApportVersion: 2.28.0-0ubuntu1 Architecture: amd64 CasperMD5CheckResult: unknown CurrentDesktop: LXQt Date: Sat Apr 13 11:44:28 2024 InstallationDate: Installed on 2024-04-13 (0 days ago) InstallationMedia: Lubuntu 22.04.4 LTS "Jammy Jellyfish" - Release amd64 (20240331) PackageArchitecture: all SourcePackage: software-properties UpgradeStatus: Upgraded to noble on 2024-04-13 (0 days ago) mtime.conffile..etc.init.d.apport: 2024-02-22T14:20:00 To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/software-properties/+bug/2061214/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 2061214] Re: Software sources not correctly updated after upgrade
** Attachment added: "screen.jpg" https://bugs.launchpad.net/ubuntu/+source/software-properties/+bug/2061214/+attachment/5764627/+files/screen.jpg -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to software-properties in Ubuntu. https://bugs.launchpad.net/bugs/2061214 Title: Software sources not correctly updated after upgrade Status in software-properties package in Ubuntu: New Bug description: Upgrading Lubuntu Jammy to Lubuntu Noble using TUI results in "Software sources" not correctly updated after upgrade. Prompt= shows normal and not LTS Otherwise the upgrade is good see attached screenshot ProblemType: Bug DistroRelease: Ubuntu 24.04 Package: software-properties-common 0.99.46 ProcVersionSignature: Ubuntu 6.8.0-22.22-generic 6.8.1 Uname: Linux 6.8.0-22-generic x86_64 ApportVersion: 2.28.0-0ubuntu1 Architecture: amd64 CasperMD5CheckResult: unknown CurrentDesktop: LXQt Date: Sat Apr 13 11:44:28 2024 InstallationDate: Installed on 2024-04-13 (0 days ago) InstallationMedia: Lubuntu 22.04.4 LTS "Jammy Jellyfish" - Release amd64 (20240331) PackageArchitecture: all SourcePackage: software-properties UpgradeStatus: Upgraded to noble on 2024-04-13 (0 days ago) mtime.conffile..etc.init.d.apport: 2024-02-22T14:20:00 To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/software-properties/+bug/2061214/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 2061214] [NEW] Software sources not correctly updated after upgrade
Public bug reported: Upgrading Lubuntu Jammy to Lubuntu Noble using TUI results in "Software sources" not correctly updated after upgrade. Prompt= shows normal and not LTS Otherwise the upgrade is good see attached screenshot ProblemType: Bug DistroRelease: Ubuntu 24.04 Package: software-properties-common 0.99.46 ProcVersionSignature: Ubuntu 6.8.0-22.22-generic 6.8.1 Uname: Linux 6.8.0-22-generic x86_64 ApportVersion: 2.28.0-0ubuntu1 Architecture: amd64 CasperMD5CheckResult: unknown CurrentDesktop: LXQt Date: Sat Apr 13 11:44:28 2024 InstallationDate: Installed on 2024-04-13 (0 days ago) InstallationMedia: Lubuntu 22.04.4 LTS "Jammy Jellyfish" - Release amd64 (20240331) PackageArchitecture: all SourcePackage: software-properties UpgradeStatus: Upgraded to noble on 2024-04-13 (0 days ago) mtime.conffile..etc.init.d.apport: 2024-02-22T14:20:00 ** Affects: software-properties (Ubuntu) Importance: Undecided Status: New ** Tags: amd64 apport-bug noble -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to software-properties in Ubuntu. https://bugs.launchpad.net/bugs/2061214 Title: Software sources not correctly updated after upgrade Status in software-properties package in Ubuntu: New Bug description: Upgrading Lubuntu Jammy to Lubuntu Noble using TUI results in "Software sources" not correctly updated after upgrade. Prompt= shows normal and not LTS Otherwise the upgrade is good see attached screenshot ProblemType: Bug DistroRelease: Ubuntu 24.04 Package: software-properties-common 0.99.46 ProcVersionSignature: Ubuntu 6.8.0-22.22-generic 6.8.1 Uname: Linux 6.8.0-22-generic x86_64 ApportVersion: 2.28.0-0ubuntu1 Architecture: amd64 CasperMD5CheckResult: unknown CurrentDesktop: LXQt Date: Sat Apr 13 11:44:28 2024 InstallationDate: Installed on 2024-04-13 (0 days ago) InstallationMedia: Lubuntu 22.04.4 LTS "Jammy Jellyfish" - Release amd64 (20240331) PackageArchitecture: all SourcePackage: software-properties UpgradeStatus: Upgraded to noble on 2024-04-13 (0 days ago) mtime.conffile..etc.init.d.apport: 2024-02-22T14:20:00 To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/software-properties/+bug/2061214/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 2043915] Re: Booting into live session results in try/install page white screen
Tested Ubuntu Noble Desktop daily ISO dated 16-01-2024 and bug was not present Fix confirmed -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to mesa in Ubuntu. https://bugs.launchpad.net/bugs/2043915 Title: Booting into live session results in try/install page white screen Status in ubuntu-desktop-installer: New Status in mesa package in Ubuntu: Fix Released Bug description: Testing Ubuntu Noble desktop daily ISO dated 19-11-2023 - Booting into live session results in try/install page white screen.Selecting install from the dash results in same white screen. see the attached screen shot ProblemType: Bug DistroRelease: Ubuntu 24.04 Package: subiquity (unknown) ProcVersionSignature: Ubuntu 6.5.0-9.9-generic 6.5.3 Uname: Linux 6.5.0-9-generic x86_64 NonfreeKernelModules: zfs ApportVersion: 2.27.0-0ubuntu6 Architecture: amd64 CasperMD5CheckResult: pass CasperVersion: 1.487 CloudArchitecture: x86_64 CloudID: nocloud CloudName: unknown CloudPlatform: nocloud CloudSubPlatform: seed-dir (/var/lib/cloud/seed/nocloud) CurrentDesktop: ubuntu:GNOME Date: Sun Nov 19 07:02:48 2023 LiveMediaBuild: Ubuntu 24.04 "Noble Numbat" - Daily amd64 (20231119) ProcEnviron: LANG=C.UTF-8 PATH=(custom, no user) SHELL=/bin/bash TERM=xterm-256color XDG_RUNTIME_DIR= SourcePackage: subiquity UpgradeStatus: No upgrade log present (probably fresh install) To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu-desktop-installer/+bug/2043915/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 2049210] Re: After install Rasp Pi 4 - system fails to send report info to metrics server
** Summary changed: - After install system fails to send report info to metrics server + After install Rasp Pi 4 - system fails to send report info to metrics server -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to xorg in Ubuntu. https://bugs.launchpad.net/bugs/2049210 Title: After install Rasp Pi 4 - system fails to send report info to metrics server Status in xorg package in Ubuntu: New Bug description: Testing Rasp Pi Ubuntu Noble daily iso dated 12-01-2024 After install system fails to send report info to metrics server, (client:timeout exceeded while awaiting headers. Will also attach screenshot of error received. Not sure if this is correct package for the bug report - ProblemType: Bug DistroRelease: Ubuntu 24.04 Package: xorg 1:7.7+23ubuntu2 ProcVersionSignature: Ubuntu 6.5.0-1005.7-raspi 6.5.3 Uname: Linux 6.5.0-1005-raspi aarch64 ApportVersion: 2.27.0-0ubuntu6 Architecture: arm64 BootLog: Error: [Errno 13] Permission denied: '/var/log/boot.log' CasperMD5CheckResult: unknown CloudArchitecture: aarch64 CloudID: none CloudName: none CloudPlatform: none CloudSubPlatform: config CompositorRunning: None CurrentDesktop: ubuntu:GNOME Date: Fri Jan 12 14:26:42 2024 DistUpgraded: Fresh install DistroCodename: noble DistroVariant: ubuntu ExtraDebuggingInterest: Yes GraphicsCard: Lspci-vt: -[:00]---00.0-[01]00.0 VIA Technologies, Inc. VL805/806 xHCI USB 3.0 Controller ProcEnviron: LANG=C.UTF-8 PATH=(custom, no user) SHELL=/bin/bash TERM=xterm-256color XDG_RUNTIME_DIR= ProcKernelCmdLine: coherent_pool=1M 8250.nr_uarts=0 snd_bcm2835.enable_headphones=0 snd_bcm2835.enable_headphones=1 snd_bcm2835.enable_hdmi=1 snd_bcm2835.enable_hdmi=0 video=HDMI-A-1:1920x1080M@60 smsc95xx.macaddr=DC:A6:32:D1:2B:AD vc_mem.mem_base=0x3ec0 vc_mem.mem_size=0x4000 zswap.enabled=1 zswap.zpool=z3fold zswap.compressor=zstd multipath=off dwc_otg.lpm_enable=0 console=tty1 root=LABEL=writable rootfstype=ext4 rootwait fixrtc quiet splash SourcePackage: xorg UpgradeStatus: No upgrade log present (probably fresh install) acpidump: version.compiz: compiz N/A version.libdrm2: libdrm2 2.4.117-1 version.libgl1-mesa-dri: libgl1-mesa-dri 23.3.0-2ubuntu3 version.libgl1-mesa-glx: libgl1-mesa-glx N/A version.xserver-xorg-core: xserver-xorg-core 2:21.1.10-1ubuntu1 version.xserver-xorg-input-evdev: xserver-xorg-input-evdev N/A version.xserver-xorg-video-ati: xserver-xorg-video-ati 1:22.0.0-1 version.xserver-xorg-video-intel: xserver-xorg-video-intel N/A version.xserver-xorg-video-nouveau: xserver-xorg-video-nouveau 1:1.0.17-2build1 To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/xorg/+bug/2049210/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 2049210] Re: After install system fails to send report info to metrics server
Attached is screenshot of error ** Attachment added: "20240112_140420[1].jpg" https://bugs.launchpad.net/ubuntu/+source/xorg/+bug/2049210/+attachment/5738774/+files/20240112_140420%5B1%5D.jpg -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to xorg in Ubuntu. https://bugs.launchpad.net/bugs/2049210 Title: After install Rasp Pi 4 - system fails to send report info to metrics server Status in xorg package in Ubuntu: New Bug description: Testing Rasp Pi Ubuntu Noble daily iso dated 12-01-2024 After install system fails to send report info to metrics server, (client:timeout exceeded while awaiting headers. Will also attach screenshot of error received. Not sure if this is correct package for the bug report - ProblemType: Bug DistroRelease: Ubuntu 24.04 Package: xorg 1:7.7+23ubuntu2 ProcVersionSignature: Ubuntu 6.5.0-1005.7-raspi 6.5.3 Uname: Linux 6.5.0-1005-raspi aarch64 ApportVersion: 2.27.0-0ubuntu6 Architecture: arm64 BootLog: Error: [Errno 13] Permission denied: '/var/log/boot.log' CasperMD5CheckResult: unknown CloudArchitecture: aarch64 CloudID: none CloudName: none CloudPlatform: none CloudSubPlatform: config CompositorRunning: None CurrentDesktop: ubuntu:GNOME Date: Fri Jan 12 14:26:42 2024 DistUpgraded: Fresh install DistroCodename: noble DistroVariant: ubuntu ExtraDebuggingInterest: Yes GraphicsCard: Lspci-vt: -[:00]---00.0-[01]00.0 VIA Technologies, Inc. VL805/806 xHCI USB 3.0 Controller ProcEnviron: LANG=C.UTF-8 PATH=(custom, no user) SHELL=/bin/bash TERM=xterm-256color XDG_RUNTIME_DIR= ProcKernelCmdLine: coherent_pool=1M 8250.nr_uarts=0 snd_bcm2835.enable_headphones=0 snd_bcm2835.enable_headphones=1 snd_bcm2835.enable_hdmi=1 snd_bcm2835.enable_hdmi=0 video=HDMI-A-1:1920x1080M@60 smsc95xx.macaddr=DC:A6:32:D1:2B:AD vc_mem.mem_base=0x3ec0 vc_mem.mem_size=0x4000 zswap.enabled=1 zswap.zpool=z3fold zswap.compressor=zstd multipath=off dwc_otg.lpm_enable=0 console=tty1 root=LABEL=writable rootfstype=ext4 rootwait fixrtc quiet splash SourcePackage: xorg UpgradeStatus: No upgrade log present (probably fresh install) acpidump: version.compiz: compiz N/A version.libdrm2: libdrm2 2.4.117-1 version.libgl1-mesa-dri: libgl1-mesa-dri 23.3.0-2ubuntu3 version.libgl1-mesa-glx: libgl1-mesa-glx N/A version.xserver-xorg-core: xserver-xorg-core 2:21.1.10-1ubuntu1 version.xserver-xorg-input-evdev: xserver-xorg-input-evdev N/A version.xserver-xorg-video-ati: xserver-xorg-video-ati 1:22.0.0-1 version.xserver-xorg-video-intel: xserver-xorg-video-intel N/A version.xserver-xorg-video-nouveau: xserver-xorg-video-nouveau 1:1.0.17-2build1 To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/xorg/+bug/2049210/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 2049210] [NEW] After install Rasp Pi 4 - system fails to send report info to metrics server
Public bug reported: Testing Rasp Pi Ubuntu Noble daily iso dated 12-01-2024 After install system fails to send report info to metrics server, (client:timeout exceeded while awaiting headers. Will also attach screenshot of error received. Not sure if this is correct package for the bug report - ProblemType: Bug DistroRelease: Ubuntu 24.04 Package: xorg 1:7.7+23ubuntu2 ProcVersionSignature: Ubuntu 6.5.0-1005.7-raspi 6.5.3 Uname: Linux 6.5.0-1005-raspi aarch64 ApportVersion: 2.27.0-0ubuntu6 Architecture: arm64 BootLog: Error: [Errno 13] Permission denied: '/var/log/boot.log' CasperMD5CheckResult: unknown CloudArchitecture: aarch64 CloudID: none CloudName: none CloudPlatform: none CloudSubPlatform: config CompositorRunning: None CurrentDesktop: ubuntu:GNOME Date: Fri Jan 12 14:26:42 2024 DistUpgraded: Fresh install DistroCodename: noble DistroVariant: ubuntu ExtraDebuggingInterest: Yes GraphicsCard: Lspci-vt: -[:00]---00.0-[01]00.0 VIA Technologies, Inc. VL805/806 xHCI USB 3.0 Controller ProcEnviron: LANG=C.UTF-8 PATH=(custom, no user) SHELL=/bin/bash TERM=xterm-256color XDG_RUNTIME_DIR= ProcKernelCmdLine: coherent_pool=1M 8250.nr_uarts=0 snd_bcm2835.enable_headphones=0 snd_bcm2835.enable_headphones=1 snd_bcm2835.enable_hdmi=1 snd_bcm2835.enable_hdmi=0 video=HDMI-A-1:1920x1080M@60 smsc95xx.macaddr=DC:A6:32:D1:2B:AD vc_mem.mem_base=0x3ec0 vc_mem.mem_size=0x4000 zswap.enabled=1 zswap.zpool=z3fold zswap.compressor=zstd multipath=off dwc_otg.lpm_enable=0 console=tty1 root=LABEL=writable rootfstype=ext4 rootwait fixrtc quiet splash SourcePackage: xorg UpgradeStatus: No upgrade log present (probably fresh install) acpidump: version.compiz: compiz N/A version.libdrm2: libdrm2 2.4.117-1 version.libgl1-mesa-dri: libgl1-mesa-dri 23.3.0-2ubuntu3 version.libgl1-mesa-glx: libgl1-mesa-glx N/A version.xserver-xorg-core: xserver-xorg-core 2:21.1.10-1ubuntu1 version.xserver-xorg-input-evdev: xserver-xorg-input-evdev N/A version.xserver-xorg-video-ati: xserver-xorg-video-ati 1:22.0.0-1 version.xserver-xorg-video-intel: xserver-xorg-video-intel N/A version.xserver-xorg-video-nouveau: xserver-xorg-video-nouveau 1:1.0.17-2build1 ** Affects: xorg (Ubuntu) Importance: Undecided Status: New ** Tags: apport-bug arm64 noble reproducible ubuntu wayland-session -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to xorg in Ubuntu. https://bugs.launchpad.net/bugs/2049210 Title: After install Rasp Pi 4 - system fails to send report info to metrics server Status in xorg package in Ubuntu: New Bug description: Testing Rasp Pi Ubuntu Noble daily iso dated 12-01-2024 After install system fails to send report info to metrics server, (client:timeout exceeded while awaiting headers. Will also attach screenshot of error received. Not sure if this is correct package for the bug report - ProblemType: Bug DistroRelease: Ubuntu 24.04 Package: xorg 1:7.7+23ubuntu2 ProcVersionSignature: Ubuntu 6.5.0-1005.7-raspi 6.5.3 Uname: Linux 6.5.0-1005-raspi aarch64 ApportVersion: 2.27.0-0ubuntu6 Architecture: arm64 BootLog: Error: [Errno 13] Permission denied: '/var/log/boot.log' CasperMD5CheckResult: unknown CloudArchitecture: aarch64 CloudID: none CloudName: none CloudPlatform: none CloudSubPlatform: config CompositorRunning: None CurrentDesktop: ubuntu:GNOME Date: Fri Jan 12 14:26:42 2024 DistUpgraded: Fresh install DistroCodename: noble DistroVariant: ubuntu ExtraDebuggingInterest: Yes GraphicsCard: Lspci-vt: -[:00]---00.0-[01]00.0 VIA Technologies, Inc. VL805/806 xHCI USB 3.0 Controller ProcEnviron: LANG=C.UTF-8 PATH=(custom, no user) SHELL=/bin/bash TERM=xterm-256color XDG_RUNTIME_DIR= ProcKernelCmdLine: coherent_pool=1M 8250.nr_uarts=0 snd_bcm2835.enable_headphones=0 snd_bcm2835.enable_headphones=1 snd_bcm2835.enable_hdmi=1 snd_bcm2835.enable_hdmi=0 video=HDMI-A-1:1920x1080M@60 smsc95xx.macaddr=DC:A6:32:D1:2B:AD vc_mem.mem_base=0x3ec0 vc_mem.mem_size=0x4000 zswap.enabled=1 zswap.zpool=z3fold zswap.compressor=zstd multipath=off dwc_otg.lpm_enable=0 console=tty1 root=LABEL=writable rootfstype=ext4 rootwait fixrtc quiet splash SourcePackage: xorg UpgradeStatus: No upgrade log present (probably fresh install) acpidump: version.compiz: compiz N/A version.libdrm2: libdrm2 2.4.117-1 version.libgl1-mesa-dri: libgl1-mesa-dri 23.3.0-2ubuntu3 version.libgl1-mesa-glx: libgl1-mesa-glx N/A version.xserver-xorg-core: xserver-xorg-core 2:21.1.10-1ubuntu1 version.xserver-xorg-input-evdev: xserver-xorg-input-evdev N/A version.xserver-xorg-video-ati: xserver-xorg-video-ati 1:22.0.0-1 version.xserver-xorg-video-intel: xserver-xorg-video-intel N/A version.xserver-xorg-video-nouveau: xserver-xorg-video-nouveau 1:1.0.17-2build1 To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source
[Touch-packages] [Bug 2042680] Re: lsb_release shows incorrect Ubuntu version
The update of the Ubuntu-preview in Microsoft store just arrived and now all is well and lsb_release shows 24.04 as should be. Sorry for any confusion. -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to base-files in Ubuntu. https://bugs.launchpad.net/bugs/2042680 Title: lsb_release shows incorrect Ubuntu version Status in base-files package in Ubuntu: Incomplete Bug description: Testing Ubuntu Noble Desktop for Raspberry PI daily ISO dated 03-11-2023 After installing and rebooting running lsb_release -a shows version 23.10 not 24.04 ProblemType: Bug DistroRelease: Ubuntu 23.10 Package: lsb-release 12.0-2 ProcVersionSignature: Ubuntu 6.5.0-1006.8-raspi 6.5.3 Uname: Linux 6.5.0-1006-raspi aarch64 ApportVersion: 2.27.0-0ubuntu5 Architecture: arm64 CasperMD5CheckResult: unknown CurrentDesktop: ubuntu:GNOME Date: Fri Nov 3 16:24:14 2023 Dependencies: PackageArchitecture: all ProcEnviron: LANG=C.UTF-8 PATH=(custom, no user) SHELL=/bin/bash TERM=xterm-256color XDG_RUNTIME_DIR= SourcePackage: lsb-release-minimal UpgradeStatus: No upgrade log present (probably fresh install) To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/base-files/+bug/2042680/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 2042680] Re: lsb_release shows incorrect Ubuntu version
Tested WSL Import and run in Ubuntu WSL in Noble Daily Download Version 6968349038 dated 22-11-2023 this issue occurs here as well - base files not updated test reults here - https://iso.qa.ubuntu.com/qatracker/milestones/450/builds/290322/testcases/1739/results ** Tags added: wsl -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to base-files in Ubuntu. https://bugs.launchpad.net/bugs/2042680 Title: lsb_release shows incorrect Ubuntu version Status in base-files package in Ubuntu: Incomplete Bug description: Testing Ubuntu Noble Desktop for Raspberry PI daily ISO dated 03-11-2023 After installing and rebooting running lsb_release -a shows version 23.10 not 24.04 ProblemType: Bug DistroRelease: Ubuntu 23.10 Package: lsb-release 12.0-2 ProcVersionSignature: Ubuntu 6.5.0-1006.8-raspi 6.5.3 Uname: Linux 6.5.0-1006-raspi aarch64 ApportVersion: 2.27.0-0ubuntu5 Architecture: arm64 CasperMD5CheckResult: unknown CurrentDesktop: ubuntu:GNOME Date: Fri Nov 3 16:24:14 2023 Dependencies: PackageArchitecture: all ProcEnviron: LANG=C.UTF-8 PATH=(custom, no user) SHELL=/bin/bash TERM=xterm-256color XDG_RUNTIME_DIR= SourcePackage: lsb-release-minimal UpgradeStatus: No upgrade log present (probably fresh install) To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/base-files/+bug/2042680/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 2042680] Re: lsb_release shows incorrect Ubuntu version
This still occurs daily ISO dated 20-11-2023 ** Tags added: noble -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to base-files in Ubuntu. https://bugs.launchpad.net/bugs/2042680 Title: lsb_release shows incorrect Ubuntu version Status in base-files package in Ubuntu: Incomplete Bug description: Testing Ubuntu Noble Desktop for Raspberry PI daily ISO dated 03-11-2023 After installing and rebooting running lsb_release -a shows version 23.10 not 24.04 ProblemType: Bug DistroRelease: Ubuntu 23.10 Package: lsb-release 12.0-2 ProcVersionSignature: Ubuntu 6.5.0-1006.8-raspi 6.5.3 Uname: Linux 6.5.0-1006-raspi aarch64 ApportVersion: 2.27.0-0ubuntu5 Architecture: arm64 CasperMD5CheckResult: unknown CurrentDesktop: ubuntu:GNOME Date: Fri Nov 3 16:24:14 2023 Dependencies: PackageArchitecture: all ProcEnviron: LANG=C.UTF-8 PATH=(custom, no user) SHELL=/bin/bash TERM=xterm-256color XDG_RUNTIME_DIR= SourcePackage: lsb-release-minimal UpgradeStatus: No upgrade log present (probably fresh install) To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/base-files/+bug/2042680/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 2042680] Re: lsb_release shows incorrect Ubuntu version
and screenshot of apt policy base-files ** Attachment added: "Screenshot from 2023-11-04 09-59-44.png" https://bugs.launchpad.net/ubuntu/+source/base-files/+bug/2042680/+attachment/5715871/+files/Screenshot%20from%202023-11-04%2009-59-44.png -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to base-files in Ubuntu. https://bugs.launchpad.net/bugs/2042680 Title: lsb_release shows incorrect Ubuntu version Status in base-files package in Ubuntu: Incomplete Bug description: Testing Ubuntu Noble Desktop for Raspberry PI daily ISO dated 03-11-2023 After installing and rebooting running lsb_release -a shows version 23.10 not 24.04 ProblemType: Bug DistroRelease: Ubuntu 23.10 Package: lsb-release 12.0-2 ProcVersionSignature: Ubuntu 6.5.0-1006.8-raspi 6.5.3 Uname: Linux 6.5.0-1006-raspi aarch64 ApportVersion: 2.27.0-0ubuntu5 Architecture: arm64 CasperMD5CheckResult: unknown CurrentDesktop: ubuntu:GNOME Date: Fri Nov 3 16:24:14 2023 Dependencies: PackageArchitecture: all ProcEnviron: LANG=C.UTF-8 PATH=(custom, no user) SHELL=/bin/bash TERM=xterm-256color XDG_RUNTIME_DIR= SourcePackage: lsb-release-minimal UpgradeStatus: No upgrade log present (probably fresh install) To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/base-files/+bug/2042680/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 2042680] Re: lsb_release shows incorrect Ubuntu version
@vorlon Steve Langasek - Retested with latest ISO dated 04-11-2023 still same results ..see attached screenshot ** Attachment added: "Screenshot from 2023-11-04 09-48-53.png" https://bugs.launchpad.net/ubuntu/+source/base-files/+bug/2042680/+attachment/5715870/+files/Screenshot%20from%202023-11-04%2009-48-53.png -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to base-files in Ubuntu. https://bugs.launchpad.net/bugs/2042680 Title: lsb_release shows incorrect Ubuntu version Status in base-files package in Ubuntu: Incomplete Bug description: Testing Ubuntu Noble Desktop for Raspberry PI daily ISO dated 03-11-2023 After installing and rebooting running lsb_release -a shows version 23.10 not 24.04 ProblemType: Bug DistroRelease: Ubuntu 23.10 Package: lsb-release 12.0-2 ProcVersionSignature: Ubuntu 6.5.0-1006.8-raspi 6.5.3 Uname: Linux 6.5.0-1006-raspi aarch64 ApportVersion: 2.27.0-0ubuntu5 Architecture: arm64 CasperMD5CheckResult: unknown CurrentDesktop: ubuntu:GNOME Date: Fri Nov 3 16:24:14 2023 Dependencies: PackageArchitecture: all ProcEnviron: LANG=C.UTF-8 PATH=(custom, no user) SHELL=/bin/bash TERM=xterm-256color XDG_RUNTIME_DIR= SourcePackage: lsb-release-minimal UpgradeStatus: No upgrade log present (probably fresh install) To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/base-files/+bug/2042680/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 2042680] Re: lsb_release shows incorrect Ubuntu version
Image used was created from the zsync ..zsync http://cdimage.ubuntu.com/ubuntu/daily-preinstalled/20231103/noble- preinstalled-desktop-arm64+raspi.img.xz.zsync this taken from the QA testing tracker site.. -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to base-files in Ubuntu. https://bugs.launchpad.net/bugs/2042680 Title: lsb_release shows incorrect Ubuntu version Status in base-files package in Ubuntu: Incomplete Bug description: Testing Ubuntu Noble Desktop for Raspberry PI daily ISO dated 03-11-2023 After installing and rebooting running lsb_release -a shows version 23.10 not 24.04 ProblemType: Bug DistroRelease: Ubuntu 23.10 Package: lsb-release 12.0-2 ProcVersionSignature: Ubuntu 6.5.0-1006.8-raspi 6.5.3 Uname: Linux 6.5.0-1006-raspi aarch64 ApportVersion: 2.27.0-0ubuntu5 Architecture: arm64 CasperMD5CheckResult: unknown CurrentDesktop: ubuntu:GNOME Date: Fri Nov 3 16:24:14 2023 Dependencies: PackageArchitecture: all ProcEnviron: LANG=C.UTF-8 PATH=(custom, no user) SHELL=/bin/bash TERM=xterm-256color XDG_RUNTIME_DIR= SourcePackage: lsb-release-minimal UpgradeStatus: No upgrade log present (probably fresh install) To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/base-files/+bug/2042680/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 2031899] Re: File system layers missing - unable to boot live cd Ubuntu Mantic Desktop
Confirm I have not seen this again after 18/08. -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to initramfs-tools in Ubuntu. https://bugs.launchpad.net/bugs/2031899 Title: File system layers missing - unable to boot live cd Ubuntu Mantic Desktop Status in ubuntu-desktop-installer: Invalid Status in initramfs-tools package in Ubuntu: Invalid Bug description: Testing Ubuntu Mantic desktop daily iso 18-08-2023 the folling error reported when attempting to boot live installation media - File system layers missing:\n '/cdrom/casper/minimal.standard.live.squashfs .. see attached screenshot To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu-desktop-installer/+bug/2031899/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 2028454] Re: apt-config crashed with SIGSEGV in _int_malloc()
Tested Ubuntu Mantic Daily ISO dated 23-07-2023 and unable to reproduce the bug. Test Info: ASUS Pro H610M-C i7-12700 Motherboard,32GB,Intel UHDGraphics 770,Intel 219-V GB Ethernet,1TB Intel SSD Testcase:UEFI,no encryption,full disk,Internet - run in VirtualBox 7.0.6 ubuntu r155176 with 4096RAM enabled Reboot,login,full disk utilized,run Firefox and stream media -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to apt in Ubuntu. https://bugs.launchpad.net/bugs/2028454 Title: apt-config crashed with SIGSEGV in _int_malloc() Status in apt package in Ubuntu: Incomplete Bug description: ProblemType: Crash DistroRelease: Ubuntu 23.10 Package: apt 2.7.2 ProcVersionSignature: Ubuntu 6.3.0-7.7-generic 6.3.5 Uname: Linux 6.3.0-7-generic x86_64 NonfreeKernelModules: zfs ApportVersion: 2.26.1-0ubuntu3 Architecture: amd64 CasperMD5CheckMismatches: ./casper/minimal.fr.squashfs CasperMD5CheckResult: fail CasperVersion: 1.481 Date: Sun Jul 23 09:14:39 2023 ExecutablePath: /usr/bin/apt-config JournalErrors: Jul 23 09:14:31 hostname kernel: overlayfs: fs on '/tmp/tmpc4daggpg/root.dir' does not support file handles, falling back to xino=off. Jul 23 09:14:35 hostname kernel: overlayfs: fs on '/tmp/tmpkuua06i6/root.dir' does not support file handles, falling back to xino=off. Jul 23 09:14:37 hostname kernel: overlayfs: fs on '/tmp/tmpkuua06i6/root.dir' does not support file handles, falling back to xino=off. Jul 23 09:14:37 hostname kernel: overlayfs: lowerdir is in-use as upperdir/workdir of another mount, accessing files from both mounts will result in undefined behavior. Jul 23 09:14:40 hostname pipewire[1573]: spa.alsa: front:0: (0 missed) impossible htimestamp diff:-8420 LiveMediaBuild: Ubuntu 23.10 "Mantic Minotaur" - Daily amd64 (20230723) ProcCmdline: apt-config shell TRUSTEDPARTS Dir::Etc::TrustedParts/d ProcEnviron: LANG= LC_MESSAGES= PATH=(custom, no user) SHELL=/bin/sh SegvAnalysis: Segfault happened at: 0x7fd06012f111 <_int_malloc+737>: cmp 0x10(%r8),%rdx PC (0x7fd06012f111) ok source "0x10(%r8)" (0x69efc653158d0b5d) not located in a known VMA region (needed readable region)! destination "%rdx" ok SegvReason: reading unknown VMA Signal: 11 SourcePackage: apt StacktraceTop: _int_malloc (av=av@entry=0x7fd060287c80 , bytes=bytes@entry=472) at ./malloc/malloc.c:3994 __GI___libc_malloc (bytes=bytes@entry=472) at ./malloc/malloc.c:3297 __fopen_internal (is32=1, mode=0x7fd0604878c3 "r", filename=0x5579117a9860 "/usr/share/dpkg/tupletable") at ./libio/iofopen.c:65 _IO_new_fopen (filename=0x5579117a9860 "/usr/share/dpkg/tupletable", mode=0x7fd0604878c3 "r") at ./libio/iofopen.c:86 std::__basic_file::open(char const*, std::_Ios_Openmode, int) () from /lib/x86_64-linux-gnu/libstdc++.so.6 Title: apt-config crashed with SIGSEGV in _int_malloc() UpgradeStatus: No upgrade log present (probably fresh install) UserGroups: N/A separator: To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/apt/+bug/2028454/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1973470] Re: Ubuntu-bug command can't find Firefox on Lubuntu Kinetic
Tested ASRock H410M-HDV i5-10400 Motherboard,32GB,Intel UHD Graphics 630,Ethernet,Intel 660p 512GB M.2 NVMe SSD - Lubuntu Jammy daily ISO 13-05-2023 Testing apport proposed fix 2.20.11-0ubuntu82.5 re bug 1973470 - confirm the bug is no longer present ** Tags removed: verification-needed ** Tags added: verification-done-jammy -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to apport in Ubuntu. https://bugs.launchpad.net/bugs/1973470 Title: Ubuntu-bug command can't find Firefox on Lubuntu Kinetic Status in Apport: Fix Released Status in apport package in Ubuntu: Fix Released Status in xdg-utils package in Ubuntu: Invalid Status in apport source package in Jammy: Fix Committed Status in xdg-utils source package in Jammy: New Bug description: Test hardware is an Elitebook 8570p, 16 GB RAM, 120 GB SSD. While reporting Bug #1973469, I discovered that ubuntu-bug was unable to open Firefox at the very end of the process. Sadly, I closed the terminal window that contained the initial error, but I was able to easily reproduce it reporting this bug. The full console output of "ubuntu-bug apport" on Lubuntu Kinetic is: *** Collecting problem information The collected information can be sent to the developers to improve the application. This might take a few minutes. .. *** Send problem report to the developers? After the problem report has been sent, please fill out the form in the automatically opened web browser. What would you like to do? Your options are: S: Send report (5.1 KB) V: View report K: Keep report file for sending later or copying to somewhere else I: Cancel and ignore future crashes of this program version C: Cancel Please choose (S/V/K/I/C): s *** Uploading problem information The collected information is being sent to the bug tracking system. This might take a few minutes. 94% *** To continue, you must visit the following URL: https://bugs.launchpad.net/ubuntu/+source/apport/+filebug/d7ffa3e0-d46d-11ec-a167-40a8f03099c8? You can launch a browser now, or copy this URL into a browser on another computer. Choices: 1: Launch a browser now C: Cancel Please choose (1/C): 1 /usr/bin/xdg-open: 882: firefox: not found /usr/bin/xdg-open: 882: firefox: not found xdg-open: no method available for opening 'https://bugs.launchpad.net/ubuntu/+source/apport/+filebug/d7ffa3e0-d46d-11ec-a167-40a8f03099c8?' I am unsure if this problem is in Apport or Lubuntu. ubuntu-bug works just fine for me on Ubuntu Kinetic, but not on Lubuntu. I suspect this is due to the Snap version of Firefox, but I don't know for sure. Since ubuntu-bug is what gave me the error, I'm filing this against Apport. ProblemType: Bug DistroRelease: Ubuntu 22.10 Package: apport 2.20.11-0ubuntu82 ProcVersionSignature: Ubuntu 5.15.0-27.28-generic 5.15.30 Uname: Linux 5.15.0-27-generic x86_64 NonfreeKernelModules: wl ApportVersion: 2.20.11-0ubuntu82 Architecture: amd64 CasperMD5CheckResult: pass CasperVersion: 1.470 CurrentDesktop: LXQt Date: Sun May 15 11:41:07 2022 LiveMediaBuild: Lubuntu 22.10 "Kinetic Kudu" - Alpha amd64 (20220514) PackageArchitecture: all SourcePackage: apport UpgradeStatus: No upgrade log present (probably fresh install) To manage notifications about this bug go to: https://bugs.launchpad.net/apport/+bug/1973470/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1795278] Re: software-properties-{qt, kde} attempts to use KUrl but it doesn't exist
** Tags added: mantic -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to software-properties in Ubuntu. https://bugs.launchpad.net/bugs/1795278 Title: software-properties-{qt,kde} attempts to use KUrl but it doesn't exist Status in software-properties package in Ubuntu: Triaged Status in software-properties source package in Focal: Triaged Status in software-properties source package in Jammy: Triaged Status in software-properties source package in Kinetic: Triaged Status in software-properties source package in Lunar: Triaged Bug description: Release: Kubuntu 18.04 Version: 0.96.24.32.1 When clicking the "Import Key" button in the "Authentication" section of the panel it throws this error: Traceback (most recent call last): File "/usr/lib/python3/dist-packages/softwareproperties/kde/SoftwarePropertiesKDE.py", line 667, in add_key_clicked url = KUrl.fromPath(home) NameError: name 'KUrl' is not defined While this doesn't crash the program it causes nothing to happen when clicking the button. Running the program in a terminal reveals the error being printed to stderr. After debugging it appears KUrl doesn't exist anywhere and I'm not sure if's a python module that has changed. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/software-properties/+bug/1795278/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1795278] Re: software-properties-{qt, kde} attempts to use KUrl but it doesn't exist
This is still occuring in Lubuntu Lunar. ** Tags added: lunar -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to software-properties in Ubuntu. https://bugs.launchpad.net/bugs/1795278 Title: software-properties-{qt,kde} attempts to use KUrl but it doesn't exist Status in software-properties package in Ubuntu: Triaged Status in software-properties source package in Focal: Triaged Status in software-properties source package in Jammy: Triaged Status in software-properties source package in Kinetic: Triaged Bug description: Release: Kubuntu 18.04 Version: 0.96.24.32.1 When clicking the "Import Key" button in the "Authentication" section of the panel it throws this error: Traceback (most recent call last): File "/usr/lib/python3/dist-packages/softwareproperties/kde/SoftwarePropertiesKDE.py", line 667, in add_key_clicked url = KUrl.fromPath(home) NameError: name 'KUrl' is not defined While this doesn't crash the program it causes nothing to happen when clicking the button. Running the program in a terminal reveals the error being printed to stderr. After debugging it appears KUrl doesn't exist anywhere and I'm not sure if's a python module that has changed. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/software-properties/+bug/1795278/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1982935] Re: Selecting "restore defaults" in software-properties-qt has no effect
** Tags added: jammy -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to software-properties in Ubuntu. https://bugs.launchpad.net/bugs/1982935 Title: Selecting "restore defaults" in software-properties-qt has no effect Status in software-properties package in Ubuntu: New Bug description: Testing Lubuntu Kinetic daily ISO 26-07-2022 1. Open "Software Sources" from "Preferences menu 2. Select "Authentication" 3. Delete the keys from "Trusted Service Providers" 4. Select "Restore Defaults" 5. After selecting "Restore Defaults" - nothing happens i.e the keys are not restored resulting in the user being unable to perform updates to the system. This bug is most likely related to bug 11795278 https://bugs.launchpad.net/ubuntu/+source/software-properties/+bug/1795278 Attached is a screenshot after removing the keys re: step #3 ProblemType: Bug DistroRelease: Ubuntu 22.10 Package: software-properties-qt 0.99.25 ProcVersionSignature: Ubuntu 5.15.0-27.28-generic 5.15.30 Uname: Linux 5.15.0-27-generic x86_64 ApportVersion: 2.22.0-0ubuntu4 Architecture: amd64 CasperMD5CheckResult: unknown CurrentDesktop: LXQt Date: Wed Jul 27 09:19:33 2022 InstallationDate: Installed on 2022-07-27 (0 days ago) InstallationMedia: Lubuntu 22.10 "Kinetic Kudu" - Alpha amd64 (20220726) PackageArchitecture: all SourcePackage: software-properties UpgradeStatus: No upgrade log present (probably fresh install) To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/software-properties/+bug/1982935/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1982935] [NEW] Selecting "restore defaults" in software-properties-qt has no effect
Public bug reported: Testing Lubuntu Kinetic daily ISO 26-07-2022 1. Open "Software Sources" from "Preferences menu 2. Select "Authentication" 3. Delete the keys from "Trusted Service Providers" 4. Select "Restore Defaults" 5. After selecting "Restore Defaults" - nothing happens i.e the keys are not restored resulting in the user being unable to perform updates to the system. This bug is most likely related to bug 11795278 https://bugs.launchpad.net/ubuntu/+source/software-properties/+bug/1795278 Attached is a screenshot after removing the keys re: step #3 ProblemType: Bug DistroRelease: Ubuntu 22.10 Package: software-properties-qt 0.99.25 ProcVersionSignature: Ubuntu 5.15.0-27.28-generic 5.15.30 Uname: Linux 5.15.0-27-generic x86_64 ApportVersion: 2.22.0-0ubuntu4 Architecture: amd64 CasperMD5CheckResult: unknown CurrentDesktop: LXQt Date: Wed Jul 27 09:19:33 2022 InstallationDate: Installed on 2022-07-27 (0 days ago) InstallationMedia: Lubuntu 22.10 "Kinetic Kudu" - Alpha amd64 (20220726) PackageArchitecture: all SourcePackage: software-properties UpgradeStatus: No upgrade log present (probably fresh install) ** Affects: software-properties (Ubuntu) Importance: Undecided Status: New ** Tags: amd64 apport-bug kinetic ** Attachment added: "screen4.jpg" https://bugs.launchpad.net/bugs/1982935/+attachment/5605558/+files/screen4.jpg -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to software-properties in Ubuntu. https://bugs.launchpad.net/bugs/1982935 Title: Selecting "restore defaults" in software-properties-qt has no effect Status in software-properties package in Ubuntu: New Bug description: Testing Lubuntu Kinetic daily ISO 26-07-2022 1. Open "Software Sources" from "Preferences menu 2. Select "Authentication" 3. Delete the keys from "Trusted Service Providers" 4. Select "Restore Defaults" 5. After selecting "Restore Defaults" - nothing happens i.e the keys are not restored resulting in the user being unable to perform updates to the system. This bug is most likely related to bug 11795278 https://bugs.launchpad.net/ubuntu/+source/software-properties/+bug/1795278 Attached is a screenshot after removing the keys re: step #3 ProblemType: Bug DistroRelease: Ubuntu 22.10 Package: software-properties-qt 0.99.25 ProcVersionSignature: Ubuntu 5.15.0-27.28-generic 5.15.30 Uname: Linux 5.15.0-27-generic x86_64 ApportVersion: 2.22.0-0ubuntu4 Architecture: amd64 CasperMD5CheckResult: unknown CurrentDesktop: LXQt Date: Wed Jul 27 09:19:33 2022 InstallationDate: Installed on 2022-07-27 (0 days ago) InstallationMedia: Lubuntu 22.10 "Kinetic Kudu" - Alpha amd64 (20220726) PackageArchitecture: all SourcePackage: software-properties UpgradeStatus: No upgrade log present (probably fresh install) To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/software-properties/+bug/1982935/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1795278] Re: software-properties-{qt, kde} attempts to use KUrl but it doesn't exist
Confirm this is still occuring in Lubuntu Kinetic - tested daily 19-05-2022 Machine tested Lenovo YG SL7 in live session. http://iso.qa.ubuntu.com/qatracker/milestones/433/builds/248375/testcases/1303/results -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to software-properties in Ubuntu. https://bugs.launchpad.net/bugs/1795278 Title: software-properties-{qt,kde} attempts to use KUrl but it doesn't exist Status in software-properties package in Ubuntu: Triaged Bug description: Release: Kubuntu 18.04 Version: 0.96.24.32.1 When clicking the "Import Key" button in the "Authentication" section of the panel it throws this error: Traceback (most recent call last): File "/usr/lib/python3/dist-packages/softwareproperties/kde/SoftwarePropertiesKDE.py", line 667, in add_key_clicked url = KUrl.fromPath(home) NameError: name 'KUrl' is not defined While this doesn't crash the program it causes nothing to happen when clicking the button. Running the program in a terminal reveals the error being printed to stderr. After debugging it appears KUrl doesn't exist anywhere and I'm not sure if's a python module that has changed. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/software-properties/+bug/1795278/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1795278] Re: software-properties-{qt, kde} attempts to use KUrl but it doesn't exist
** Tags added: kinetic -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to software-properties in Ubuntu. https://bugs.launchpad.net/bugs/1795278 Title: software-properties-{qt,kde} attempts to use KUrl but it doesn't exist Status in software-properties package in Ubuntu: Triaged Bug description: Release: Kubuntu 18.04 Version: 0.96.24.32.1 When clicking the "Import Key" button in the "Authentication" section of the panel it throws this error: Traceback (most recent call last): File "/usr/lib/python3/dist-packages/softwareproperties/kde/SoftwarePropertiesKDE.py", line 667, in add_key_clicked url = KUrl.fromPath(home) NameError: name 'KUrl' is not defined While this doesn't crash the program it causes nothing to happen when clicking the button. Running the program in a terminal reveals the error being printed to stderr. After debugging it appears KUrl doesn't exist anywhere and I'm not sure if's a python module that has changed. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/software-properties/+bug/1795278/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1972009] [NEW] Totem fails to find video - kinetic ubuntu raspi pi
Public bug reported: Running test kinetic ubuntu daily - raspi 4 8GB daily ISO When attempting to run "totem big_buck_bunny_720p_surround.mp4" as per the testcase - received the error - An error occurred - the specified movie could not be found. No further errors encountered -- I ran ubuntu-bug totem but see that the package selected is "gstreamer1.0" - please correct if need be. ProblemType: Bug DistroRelease: Ubuntu 22.10 Package: libgstreamer1.0-0 1.20.1-1 ProcVersionSignature: Ubuntu 5.15.0-1006.6-raspi 5.15.30 Uname: Linux 5.15.0-1006-raspi aarch64 ApportVersion: 2.20.11-0ubuntu82 Architecture: arm64 CasperMD5CheckResult: unknown CurrentDesktop: ubuntu:GNOME Date: Fri May 6 17:07:53 2022 ImageMediaBuild: 20220506 LogAlsaMixer: Simple mixer control 'Headphone',0 Capabilities: pvolume pvolume-joined pswitch pswitch-joined Playback channels: Mono Limits: Playback -10239 - 400 Mono: Playback -2000 [77%] [-20.00dB] [on] SourcePackage: gstreamer1.0 UpgradeStatus: No upgrade log present (probably fresh install) ** Affects: gstreamer1.0 (Ubuntu) Importance: Undecided Status: New ** Tags: apport-bug arm64 arm64-image kinetic raspi-image wayland-session -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to gstreamer1.0 in Ubuntu. https://bugs.launchpad.net/bugs/1972009 Title: Totem fails to find video - kinetic ubuntu raspi pi Status in gstreamer1.0 package in Ubuntu: New Bug description: Running test kinetic ubuntu daily - raspi 4 8GB daily ISO When attempting to run "totem big_buck_bunny_720p_surround.mp4" as per the testcase - received the error - An error occurred - the specified movie could not be found. No further errors encountered -- I ran ubuntu-bug totem but see that the package selected is "gstreamer1.0" - please correct if need be. ProblemType: Bug DistroRelease: Ubuntu 22.10 Package: libgstreamer1.0-0 1.20.1-1 ProcVersionSignature: Ubuntu 5.15.0-1006.6-raspi 5.15.30 Uname: Linux 5.15.0-1006-raspi aarch64 ApportVersion: 2.20.11-0ubuntu82 Architecture: arm64 CasperMD5CheckResult: unknown CurrentDesktop: ubuntu:GNOME Date: Fri May 6 17:07:53 2022 ImageMediaBuild: 20220506 LogAlsaMixer: Simple mixer control 'Headphone',0 Capabilities: pvolume pvolume-joined pswitch pswitch-joined Playback channels: Mono Limits: Playback -10239 - 400 Mono: Playback -2000 [77%] [-20.00dB] [on] SourcePackage: gstreamer1.0 UpgradeStatus: No upgrade log present (probably fresh install) To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/gstreamer1.0/+bug/1972009/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1964579] Re: Pulseaudio fails to detect /enable Intel SST sound card
This error also affecting Lubuntu,Ubuntu Budgie and Ubuntu. -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to pulseaudio in Ubuntu. https://bugs.launchpad.net/bugs/1964579 Title: Pulseaudio fails to detect /enable Intel SST sound card Status in pulseaudio package in Ubuntu: New Bug description: Testing Live session and also full install Ubuntu Mate Jammy daily ISO 11-03-2022 The machine tested - AEROFARA Aero2 Pro, N5105,8GB,Ethernet GB,WiFi,Bluetooth 4.0,128GB SSD,Intel UHD Graphics The audio card is not detected - entering sound preferences settings - "output" only shows dummy output stereo - under "hardware" is no entry available ProblemType: Bug DistroRelease: Ubuntu 22.04 Package: pulseaudio 1:15.99.1+dfsg1-1ubuntu1 ProcVersionSignature: Ubuntu 5.15.0-22.22-generic 5.15.19 Uname: Linux 5.15.0-22-generic x86_64 NonfreeKernelModules: zfs zunicode zavl icp zcommon znvpair ApportVersion: 2.20.11-0ubuntu78 Architecture: amd64 AudioDevicesInUse: Error: command ['fuser', '-v', '/dev/snd/by-path', '/dev/snd/controlC0', '/dev/snd/hwC0D2', '/dev/snd/pcmC0D3p', '/dev/snd/pcmC0D2p', '/dev/snd/pcmC0D1p', '/dev/snd/seq', '/dev/snd/timer'] failed with exit code 1: CasperMD5CheckResult: pass CasperVersion: 1.467 CurrentDesktop: MATE Date: Fri Mar 11 09:25:31 2022 LiveMediaBuild: Ubuntu-MATE 22.04 LTS "Jammy Jellyfish" - Alpha amd64 (20220311) ProcEnviron: TERM=xterm-256color PATH=(custom, no user) XDG_RUNTIME_DIR= LANG=en_US.UTF-8 SHELL=/bin/bash SourcePackage: pulseaudio Symptom: audio Symptom_Card: sof-hda-dsp - sof-hda-dsp Symptom_Jack: Digital Out, HDMI Title: [AERO 2 Pro, Intel Jasperlake HDMI, Digital Out, HDMI] Pulseaudio fails to detect card UpgradeStatus: No upgrade log present (probably fresh install) dmi.bios.date: 12/13/2021 dmi.bios.release: 5.19 dmi.bios.vendor: American Megatrends International, LLC. dmi.bios.version: JB1006 dmi.board.asset.tag: Default string dmi.board.name: AERO 2 Pro dmi.board.vendor: Shenzhen Wangang Technology Co., Ltd dmi.board.version: Default string dmi.chassis.asset.tag: Default string dmi.chassis.type: 35 dmi.chassis.vendor: Default string dmi.chassis.version: Default string dmi.ec.firmware.release: 0.7 dmi.modalias: dmi:bvnAmericanMegatrendsInternational,LLC.:bvrJB1006:bd12/13/2021:br5.19:efr0.7:svnShenzhenWangangTechnologyCo.,Ltd:pnAERO2Pro:pvrDefaultstring:rvnShenzhenWangangTechnologyCo.,Ltd:rnAERO2Pro:rvrDefaultstring:cvnDefaultstring:ct35:cvrDefaultstring:skuAERO2Pro: dmi.product.family: Windows 10 Pro dmi.product.name: AERO 2 Pro dmi.product.sku: AERO 2 Pro dmi.product.version: Default string dmi.sys.vendor: Shenzhen Wangang Technology Co., Ltd To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/pulseaudio/+bug/1964579/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1964579] Re: Pulseaudio fails to detect card
** Summary changed: - [AERO 2 Pro, Intel Jasperlake HDMI, Digital Out, HDMI] Pulseaudio fails to detect card + Pulseaudio fails to detect card ** Summary changed: - Pulseaudio fails to detect card + Pulseaudio fails to detect /enable card ** Summary changed: - Pulseaudio fails to detect /enable card + Pulseaudio fails to detect /enable Intel SST sound card -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to pulseaudio in Ubuntu. https://bugs.launchpad.net/bugs/1964579 Title: Pulseaudio fails to detect /enable Intel SST sound card Status in pulseaudio package in Ubuntu: New Bug description: Testing Live session and also full install Ubuntu Mate Jammy daily ISO 11-03-2022 The machine tested - AEROFARA Aero2 Pro, N5105,8GB,Ethernet GB,WiFi,Bluetooth 4.0,128GB SSD,Intel UHD Graphics The audio card is not detected - entering sound preferences settings - "output" only shows dummy output stereo - under "hardware" is no entry available ProblemType: Bug DistroRelease: Ubuntu 22.04 Package: pulseaudio 1:15.99.1+dfsg1-1ubuntu1 ProcVersionSignature: Ubuntu 5.15.0-22.22-generic 5.15.19 Uname: Linux 5.15.0-22-generic x86_64 NonfreeKernelModules: zfs zunicode zavl icp zcommon znvpair ApportVersion: 2.20.11-0ubuntu78 Architecture: amd64 AudioDevicesInUse: Error: command ['fuser', '-v', '/dev/snd/by-path', '/dev/snd/controlC0', '/dev/snd/hwC0D2', '/dev/snd/pcmC0D3p', '/dev/snd/pcmC0D2p', '/dev/snd/pcmC0D1p', '/dev/snd/seq', '/dev/snd/timer'] failed with exit code 1: CasperMD5CheckResult: pass CasperVersion: 1.467 CurrentDesktop: MATE Date: Fri Mar 11 09:25:31 2022 LiveMediaBuild: Ubuntu-MATE 22.04 LTS "Jammy Jellyfish" - Alpha amd64 (20220311) ProcEnviron: TERM=xterm-256color PATH=(custom, no user) XDG_RUNTIME_DIR= LANG=en_US.UTF-8 SHELL=/bin/bash SourcePackage: pulseaudio Symptom: audio Symptom_Card: sof-hda-dsp - sof-hda-dsp Symptom_Jack: Digital Out, HDMI Title: [AERO 2 Pro, Intel Jasperlake HDMI, Digital Out, HDMI] Pulseaudio fails to detect card UpgradeStatus: No upgrade log present (probably fresh install) dmi.bios.date: 12/13/2021 dmi.bios.release: 5.19 dmi.bios.vendor: American Megatrends International, LLC. dmi.bios.version: JB1006 dmi.board.asset.tag: Default string dmi.board.name: AERO 2 Pro dmi.board.vendor: Shenzhen Wangang Technology Co., Ltd dmi.board.version: Default string dmi.chassis.asset.tag: Default string dmi.chassis.type: 35 dmi.chassis.vendor: Default string dmi.chassis.version: Default string dmi.ec.firmware.release: 0.7 dmi.modalias: dmi:bvnAmericanMegatrendsInternational,LLC.:bvrJB1006:bd12/13/2021:br5.19:efr0.7:svnShenzhenWangangTechnologyCo.,Ltd:pnAERO2Pro:pvrDefaultstring:rvnShenzhenWangangTechnologyCo.,Ltd:rnAERO2Pro:rvrDefaultstring:cvnDefaultstring:ct35:cvrDefaultstring:skuAERO2Pro: dmi.product.family: Windows 10 Pro dmi.product.name: AERO 2 Pro dmi.product.sku: AERO 2 Pro dmi.product.version: Default string dmi.sys.vendor: Shenzhen Wangang Technology Co., Ltd To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/pulseaudio/+bug/1964579/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1964579] Re: [AERO 2 Pro, Intel Jasperlake HDMI, Digital Out, HDMI] Pulseaudio fails to detect card
Looking at the alsainfo.txt - I can see that the card is detected but not enabled. -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to pulseaudio in Ubuntu. https://bugs.launchpad.net/bugs/1964579 Title: Pulseaudio fails to detect /enable card Status in pulseaudio package in Ubuntu: New Bug description: Testing Live session and also full install Ubuntu Mate Jammy daily ISO 11-03-2022 The machine tested - AEROFARA Aero2 Pro, N5105,8GB,Ethernet GB,WiFi,Bluetooth 4.0,128GB SSD,Intel UHD Graphics The audio card is not detected - entering sound preferences settings - "output" only shows dummy output stereo - under "hardware" is no entry available ProblemType: Bug DistroRelease: Ubuntu 22.04 Package: pulseaudio 1:15.99.1+dfsg1-1ubuntu1 ProcVersionSignature: Ubuntu 5.15.0-22.22-generic 5.15.19 Uname: Linux 5.15.0-22-generic x86_64 NonfreeKernelModules: zfs zunicode zavl icp zcommon znvpair ApportVersion: 2.20.11-0ubuntu78 Architecture: amd64 AudioDevicesInUse: Error: command ['fuser', '-v', '/dev/snd/by-path', '/dev/snd/controlC0', '/dev/snd/hwC0D2', '/dev/snd/pcmC0D3p', '/dev/snd/pcmC0D2p', '/dev/snd/pcmC0D1p', '/dev/snd/seq', '/dev/snd/timer'] failed with exit code 1: CasperMD5CheckResult: pass CasperVersion: 1.467 CurrentDesktop: MATE Date: Fri Mar 11 09:25:31 2022 LiveMediaBuild: Ubuntu-MATE 22.04 LTS "Jammy Jellyfish" - Alpha amd64 (20220311) ProcEnviron: TERM=xterm-256color PATH=(custom, no user) XDG_RUNTIME_DIR= LANG=en_US.UTF-8 SHELL=/bin/bash SourcePackage: pulseaudio Symptom: audio Symptom_Card: sof-hda-dsp - sof-hda-dsp Symptom_Jack: Digital Out, HDMI Title: [AERO 2 Pro, Intel Jasperlake HDMI, Digital Out, HDMI] Pulseaudio fails to detect card UpgradeStatus: No upgrade log present (probably fresh install) dmi.bios.date: 12/13/2021 dmi.bios.release: 5.19 dmi.bios.vendor: American Megatrends International, LLC. dmi.bios.version: JB1006 dmi.board.asset.tag: Default string dmi.board.name: AERO 2 Pro dmi.board.vendor: Shenzhen Wangang Technology Co., Ltd dmi.board.version: Default string dmi.chassis.asset.tag: Default string dmi.chassis.type: 35 dmi.chassis.vendor: Default string dmi.chassis.version: Default string dmi.ec.firmware.release: 0.7 dmi.modalias: dmi:bvnAmericanMegatrendsInternational,LLC.:bvrJB1006:bd12/13/2021:br5.19:efr0.7:svnShenzhenWangangTechnologyCo.,Ltd:pnAERO2Pro:pvrDefaultstring:rvnShenzhenWangangTechnologyCo.,Ltd:rnAERO2Pro:rvrDefaultstring:cvnDefaultstring:ct35:cvrDefaultstring:skuAERO2Pro: dmi.product.family: Windows 10 Pro dmi.product.name: AERO 2 Pro dmi.product.sku: AERO 2 Pro dmi.product.version: Default string dmi.sys.vendor: Shenzhen Wangang Technology Co., Ltd To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/pulseaudio/+bug/1964579/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1964579] [NEW] Pulseaudio fails to detect /enable card
Public bug reported: Testing Live session and also full install Ubuntu Mate Jammy daily ISO 11-03-2022 The machine tested - AEROFARA Aero2 Pro, N5105,8GB,Ethernet GB,WiFi,Bluetooth 4.0,128GB SSD,Intel UHD Graphics The audio card is not detected - entering sound preferences settings - "output" only shows dummy output stereo - under "hardware" is no entry available ProblemType: Bug DistroRelease: Ubuntu 22.04 Package: pulseaudio 1:15.99.1+dfsg1-1ubuntu1 ProcVersionSignature: Ubuntu 5.15.0-22.22-generic 5.15.19 Uname: Linux 5.15.0-22-generic x86_64 NonfreeKernelModules: zfs zunicode zavl icp zcommon znvpair ApportVersion: 2.20.11-0ubuntu78 Architecture: amd64 AudioDevicesInUse: Error: command ['fuser', '-v', '/dev/snd/by-path', '/dev/snd/controlC0', '/dev/snd/hwC0D2', '/dev/snd/pcmC0D3p', '/dev/snd/pcmC0D2p', '/dev/snd/pcmC0D1p', '/dev/snd/seq', '/dev/snd/timer'] failed with exit code 1: CasperMD5CheckResult: pass CasperVersion: 1.467 CurrentDesktop: MATE Date: Fri Mar 11 09:25:31 2022 LiveMediaBuild: Ubuntu-MATE 22.04 LTS "Jammy Jellyfish" - Alpha amd64 (20220311) ProcEnviron: TERM=xterm-256color PATH=(custom, no user) XDG_RUNTIME_DIR= LANG=en_US.UTF-8 SHELL=/bin/bash SourcePackage: pulseaudio Symptom: audio Symptom_Card: sof-hda-dsp - sof-hda-dsp Symptom_Jack: Digital Out, HDMI Title: [AERO 2 Pro, Intel Jasperlake HDMI, Digital Out, HDMI] Pulseaudio fails to detect card UpgradeStatus: No upgrade log present (probably fresh install) dmi.bios.date: 12/13/2021 dmi.bios.release: 5.19 dmi.bios.vendor: American Megatrends International, LLC. dmi.bios.version: JB1006 dmi.board.asset.tag: Default string dmi.board.name: AERO 2 Pro dmi.board.vendor: Shenzhen Wangang Technology Co., Ltd dmi.board.version: Default string dmi.chassis.asset.tag: Default string dmi.chassis.type: 35 dmi.chassis.vendor: Default string dmi.chassis.version: Default string dmi.ec.firmware.release: 0.7 dmi.modalias: dmi:bvnAmericanMegatrendsInternational,LLC.:bvrJB1006:bd12/13/2021:br5.19:efr0.7:svnShenzhenWangangTechnologyCo.,Ltd:pnAERO2Pro:pvrDefaultstring:rvnShenzhenWangangTechnologyCo.,Ltd:rnAERO2Pro:rvrDefaultstring:cvnDefaultstring:ct35:cvrDefaultstring:skuAERO2Pro: dmi.product.family: Windows 10 Pro dmi.product.name: AERO 2 Pro dmi.product.sku: AERO 2 Pro dmi.product.version: Default string dmi.sys.vendor: Shenzhen Wangang Technology Co., Ltd ** Affects: pulseaudio (Ubuntu) Importance: Undecided Status: New ** Tags: amd64 apport-bug jammy ** Description changed: - Testing Live session Ubuntu Mate Jammy daily ISO 11-03-2022 + Testing Live session and also full install Ubuntu Mate Jammy daily ISO + 11-03-2022 + + The machine tested - AEROFARA Aero2 Pro, N5105,8GB,Ethernet + GB,WiFi,Bluetooth 4.0,128GB SSD,Intel UHD Graphics The audio card is not detected - entering sound preferences settings - "output" only shows dummy output stereo - under "hardware" is no entry available ProblemType: Bug DistroRelease: Ubuntu 22.04 Package: pulseaudio 1:15.99.1+dfsg1-1ubuntu1 ProcVersionSignature: Ubuntu 5.15.0-22.22-generic 5.15.19 Uname: Linux 5.15.0-22-generic x86_64 NonfreeKernelModules: zfs zunicode zavl icp zcommon znvpair ApportVersion: 2.20.11-0ubuntu78 Architecture: amd64 AudioDevicesInUse: Error: command ['fuser', '-v', '/dev/snd/by-path', '/dev/snd/controlC0', '/dev/snd/hwC0D2', '/dev/snd/pcmC0D3p', '/dev/snd/pcmC0D2p', '/dev/snd/pcmC0D1p', '/dev/snd/seq', '/dev/snd/timer'] failed with exit code 1: CasperMD5CheckResult: pass CasperVersion: 1.467 CurrentDesktop: MATE Date: Fri Mar 11 09:25:31 2022 LiveMediaBuild: Ubuntu-MATE 22.04 LTS "Jammy Jellyfish" - Alpha amd64 (20220311) ProcEnviron: - TERM=xterm-256color - PATH=(custom, no user) - XDG_RUNTIME_DIR= - LANG=en_US.UTF-8 - SHELL=/bin/bash + TERM=xterm-256color + PATH=(custom, no user) + XDG_RUNTIME_DIR= + LANG=en_US.UTF-8 + SHELL=/bin/bash SourcePackage: pulseaudio Symptom: audio Symptom_Card: sof-hda-dsp - sof-hda-dsp Symptom_Jack: Digital Out, HDMI Title: [AERO 2 Pro, Intel Jasperlake HDMI, Digital Out, HDMI] Pulseaudio fails to detect card UpgradeStatus: No upgrade log present (probably fresh install) dmi.bios.date: 12/13/2021 dmi.bios.release: 5.19 dmi.bios.vendor: American Megatrends International, LLC. dmi.bios.version: JB1006 dmi.board.asset.tag: Default string dmi.board.name: AERO 2 Pro dmi.board.vendor: Shenzhen Wangang Technology Co., Ltd dmi.board.version: Default string dmi.chassis.asset.tag: Default string dmi.chassis.type: 35 dmi.chassis.vendor: Default string dmi.chassis.version: Default string dmi.ec.firmware.release: 0.7 dmi.modalias: dmi:bvnAmericanMegatrendsInternational,LLC.:bvrJB1006:bd12/13/2021:br5.19:efr0.7:svnShenzhenWangangTechnologyCo.,Ltd:pnAERO2Pro:pvrDefaultstring:rvnShenzhenWangangTechnologyCo.,Ltd:rnAERO2Pro:rvrDefaultstring:cvnDefaultstring:ct35:cvrDefaultstring:skuAERO2Pro: dmi.product.family: Windows 10 Pro dmi.product
[Touch-packages] [Bug 1960226] Re: Ubuntu Jammy Desktop fails to boot after install
2022-02-09 Fails Ran 2 tests - http://iso.qa.ubuntu.com/qatracker/milestones/429/builds/244128/testcases/1300/results -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to systemd in Ubuntu. https://bugs.launchpad.net/bugs/1960226 Title: Ubuntu Jammy Desktop fails to boot after install Status in systemd package in Ubuntu: Incomplete Status in ubuntu-meta package in Ubuntu: New Bug description: Ubuntu Jammy Desktop fails to boot after install Testing Ubuntu Jammy Desktop daily ISO - 2022-02-07 This also affects Ubuntu Jammy Canary desktop - tested daily ISO 2022-02-07 After installing the OS and selecting reboot the system reboot fails - The vendors logo appears with the Ubuntu logo and fails to boot - I have tried this with 2 barebone machines and 1 in VirtualBox - will attach syslogs and images in a separate comment. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/systemd/+bug/1960226/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1960226] Re: Ubuntu Jammy Desktop fails to boot after install
Retested Ubuntu Jammy daily ISO 2022-02-08 - again fails to boot to desktop after install. http://iso.qa.ubuntu.com/qatracker/milestones/429/builds/244085/testcases/1300/results -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to systemd in Ubuntu. https://bugs.launchpad.net/bugs/1960226 Title: Ubuntu Jammy Desktop fails to boot after install Status in systemd package in Ubuntu: Incomplete Bug description: Ubuntu Jammy Desktop fails to boot after install Testing Ubuntu Jammy Desktop daily ISO - 2022-02-07 This also affects Ubuntu Jammy Canary desktop - tested daily ISO 2022-02-07 After installing the OS and selecting reboot the system reboot fails - The vendors logo appears with the Ubuntu logo and fails to boot - I have tried this with 2 barebone machines and 1 in VirtualBox - will attach syslogs and images in a separate comment. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/systemd/+bug/1960226/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1960226] Re: Ubuntu Jammy Desktop fails to boot after install
This also affects Ubuntu Jammy Canary desktop - tested daily ISO 2022-02-07 ** Description changed: Ubuntu Jammy Desktop fails to boot after install Testing Ubuntu Jammy Desktop daily ISO - 2022-02-07 + + This also affects Ubuntu Jammy Canary desktop - tested daily ISO + 2022-02-07 After installing the OS and selecting reboot the system reboot fails - The vendors logo appears with the Ubuntu logo and fails to boot - I have tried this with 2 barebone machines and 1 in VirtualBox - will attach syslogs and images in a separate comment. ** Tags added: jammy -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to systemd in Ubuntu. https://bugs.launchpad.net/bugs/1960226 Title: Ubuntu Jammy Desktop fails to boot after install Status in systemd package in Ubuntu: Incomplete Bug description: Ubuntu Jammy Desktop fails to boot after install Testing Ubuntu Jammy Desktop daily ISO - 2022-02-07 This also affects Ubuntu Jammy Canary desktop - tested daily ISO 2022-02-07 After installing the OS and selecting reboot the system reboot fails - The vendors logo appears with the Ubuntu logo and fails to boot - I have tried this with 2 barebone machines and 1 in VirtualBox - will attach syslogs and images in a separate comment. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/systemd/+bug/1960226/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1960226] Re: Ubuntu Jammy Desktop fails to boot after install
@juliank I will retest this again after release next daily ISO on other machines as well. -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to systemd in Ubuntu. https://bugs.launchpad.net/bugs/1960226 Title: Ubuntu Jammy Desktop fails to boot after install Status in systemd package in Ubuntu: Incomplete Bug description: Ubuntu Jammy Desktop fails to boot after install Testing Ubuntu Jammy Desktop daily ISO - 2022-02-07 After installing the OS and selecting reboot the system reboot fails - The vendors logo appears with the Ubuntu logo and fails to boot - I have tried this with 2 barebone machines and 1 in VirtualBox - will attach syslogs and images in a separate comment. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/systemd/+bug/1960226/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1942685] Re: pulseaudio crashed with SIGSEGV in _IceTransClose()
Hello Brian (brian-murray) Please see my comment #9 above - i have run numerous tests on Xubuntu Impish and have been unable to reproduce this bug. -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to pulseaudio in Ubuntu. https://bugs.launchpad.net/bugs/1942685 Title: pulseaudio crashed with SIGSEGV in _IceTransClose() Status in PulseAudio: Unknown Status in pulseaudio package in Ubuntu: Fix Committed Status in pulseaudio source package in Impish: Fix Committed Bug description: * Impact The pulseaudio service sometime segfaults on session closing which trigger a bug report dialog * Test plan Log out of a desktop session and back in, there should be no error prompt The issue isn't triggered only randomly it seems so it might be easier to check that reports stop on https://errors.ubuntu.com/problem/877172e07ed9f86b0674cd458a5aaf24b37fb01e * Where problems could occur The change is in the X session closing handling so shouldn't impact on normal use, if incorrect the fix could lead to increase the chance of hitting the segfault when an Xsession is closed --- Installing Xubuntu Impish daily ISO 04092021 After install I rebooted - applied updates and then rebooted again- the errors (pulseaudio crashed with SIGSEGV in _IceTransClose() ) occurred after logging in. ProblemType: Crash DistroRelease: Ubuntu 21.10 Package: pulseaudio 1:15.0+dfsg1-1ubuntu2 ProcVersionSignature: Ubuntu 5.13.0-14.14-generic 5.13.1 Uname: Linux 5.13.0-14-generic x86_64 ApportVersion: 2.20.11-0ubuntu68 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: kx 847 F pulseaudio CasperMD5CheckResult: pass Date: Sat Sep 4 16:43:45 2021 ExecutablePath: /usr/bin/pulseaudio InstallationDate: Installed on 2021-09-04 (0 days ago) InstallationMedia: Xubuntu 21.10 "Impish Indri" - Alpha amd64 (20210904) ProcCmdline: /usr/bin/pulseaudio --daemonize=no --log-target=journal Signal: 11 SourcePackage: pulseaudio StacktraceTop: _IceTransClose () from /lib/x86_64-linux-gnu/libICE.so.6 _IceFreeConnection () from /lib/x86_64-linux-gnu/libICE.so.6 IceCloseConnection () from /lib/x86_64-linux-gnu/libICE.so.6 SmcCloseConnection () from /lib/x86_64-linux-gnu/libSM.so.6 ?? () from /usr/lib/pulse-15.0+dfsg1/modules/module-x11-xsmp.so Title: pulseaudio crashed with SIGSEGV in _IceTransClose() UpgradeStatus: No upgrade log present (probably fresh install) UserGroups: adm cdrom dip lpadmin lxd plugdev sambashare sudo dmi.bios.date: 12/23/2020 dmi.bios.release: 1.51 dmi.bios.vendor: LENOVO dmi.bios.version: DKCN51WW dmi.board.asset.tag: NO Asset Tag dmi.board.name: LNVNB161216 dmi.board.vendor: LENOVO dmi.board.version: SDK0J40700 WIN dmi.chassis.asset.tag: NO Asset Tag dmi.chassis.type: 10 dmi.chassis.vendor: LENOVO dmi.chassis.version: Lenovo V14-IIL dmi.ec.firmware.release: 1.51 dmi.modalias: dmi:bvnLENOVO:bvrDKCN51WW:bd12/23/2020:br1.51:efr1.51:svnLENOVO:pn82C4:pvrLenovoV14-IIL:skuLENOVO_MT_82C4_BU_idea_FM_V14-IIL:rvnLENOVO:rnLNVNB161216:rvrSDK0J40700WIN:cvnLENOVO:ct10:cvrLenovoV14-IIL: dmi.product.family: V14-IIL dmi.product.name: 82C4 dmi.product.sku: LENOVO_MT_82C4_BU_idea_FM_V14-IIL dmi.product.version: Lenovo V14-IIL dmi.sys.vendor: LENOVO separator: To manage notifications about this bug go to: https://bugs.launchpad.net/pulseaudio/+bug/1942685/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1942685] Re: pulseaudio crashed with SIGSEGV in _IceTransClose()
@brian-murray - Yes I will continue to test but fyi - I have run 24 tests on Xubuntu (18 different ISO´s) since the original report without being able to reproduce the error. -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to pulseaudio in Ubuntu. https://bugs.launchpad.net/bugs/1942685 Title: pulseaudio crashed with SIGSEGV in _IceTransClose() Status in pulseaudio package in Ubuntu: Confirmed Bug description: https://errors.ubuntu.com/problem/877172e07ed9f86b0674cd458a5aaf24b37fb01e --- Installing Xubuntu Impish daily ISO 04092021 After install I rebooted - applied updates and then rebooted again- the errors (pulseaudio crashed with SIGSEGV in _IceTransClose() ) occurred after logging in. ProblemType: Crash DistroRelease: Ubuntu 21.10 Package: pulseaudio 1:15.0+dfsg1-1ubuntu2 ProcVersionSignature: Ubuntu 5.13.0-14.14-generic 5.13.1 Uname: Linux 5.13.0-14-generic x86_64 ApportVersion: 2.20.11-0ubuntu68 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: kx 847 F pulseaudio CasperMD5CheckResult: pass Date: Sat Sep 4 16:43:45 2021 ExecutablePath: /usr/bin/pulseaudio InstallationDate: Installed on 2021-09-04 (0 days ago) InstallationMedia: Xubuntu 21.10 "Impish Indri" - Alpha amd64 (20210904) ProcCmdline: /usr/bin/pulseaudio --daemonize=no --log-target=journal Signal: 11 SourcePackage: pulseaudio StacktraceTop: _IceTransClose () from /lib/x86_64-linux-gnu/libICE.so.6 _IceFreeConnection () from /lib/x86_64-linux-gnu/libICE.so.6 IceCloseConnection () from /lib/x86_64-linux-gnu/libICE.so.6 SmcCloseConnection () from /lib/x86_64-linux-gnu/libSM.so.6 ?? () from /usr/lib/pulse-15.0+dfsg1/modules/module-x11-xsmp.so Title: pulseaudio crashed with SIGSEGV in _IceTransClose() UpgradeStatus: No upgrade log present (probably fresh install) UserGroups: adm cdrom dip lpadmin lxd plugdev sambashare sudo dmi.bios.date: 12/23/2020 dmi.bios.release: 1.51 dmi.bios.vendor: LENOVO dmi.bios.version: DKCN51WW dmi.board.asset.tag: NO Asset Tag dmi.board.name: LNVNB161216 dmi.board.vendor: LENOVO dmi.board.version: SDK0J40700 WIN dmi.chassis.asset.tag: NO Asset Tag dmi.chassis.type: 10 dmi.chassis.vendor: LENOVO dmi.chassis.version: Lenovo V14-IIL dmi.ec.firmware.release: 1.51 dmi.modalias: dmi:bvnLENOVO:bvrDKCN51WW:bd12/23/2020:br1.51:efr1.51:svnLENOVO:pn82C4:pvrLenovoV14-IIL:skuLENOVO_MT_82C4_BU_idea_FM_V14-IIL:rvnLENOVO:rnLNVNB161216:rvrSDK0J40700WIN:cvnLENOVO:ct10:cvrLenovoV14-IIL: dmi.product.family: V14-IIL dmi.product.name: 82C4 dmi.product.sku: LENOVO_MT_82C4_BU_idea_FM_V14-IIL dmi.product.version: Lenovo V14-IIL dmi.sys.vendor: LENOVO separator: To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/pulseaudio/+bug/1942685/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1942685] Re: pulseaudio crashed with SIGSEGV in _IceTransClose()
Tested Xubuntu Impish daily 29-09-2021 and was unable to to reproduce the bug - This test was on the same machine (Lenovo V14-IIL) as my initial report. -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to pulseaudio in Ubuntu. https://bugs.launchpad.net/bugs/1942685 Title: pulseaudio crashed with SIGSEGV in _IceTransClose() Status in pulseaudio package in Ubuntu: Confirmed Bug description: https://errors.ubuntu.com/problem/877172e07ed9f86b0674cd458a5aaf24b37fb01e --- Installing Xubuntu Impish daily ISO 04092021 After install I rebooted - applied updates and then rebooted again- the errors (pulseaudio crashed with SIGSEGV in _IceTransClose() ) occurred after logging in. ProblemType: Crash DistroRelease: Ubuntu 21.10 Package: pulseaudio 1:15.0+dfsg1-1ubuntu2 ProcVersionSignature: Ubuntu 5.13.0-14.14-generic 5.13.1 Uname: Linux 5.13.0-14-generic x86_64 ApportVersion: 2.20.11-0ubuntu68 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: kx 847 F pulseaudio CasperMD5CheckResult: pass Date: Sat Sep 4 16:43:45 2021 ExecutablePath: /usr/bin/pulseaudio InstallationDate: Installed on 2021-09-04 (0 days ago) InstallationMedia: Xubuntu 21.10 "Impish Indri" - Alpha amd64 (20210904) ProcCmdline: /usr/bin/pulseaudio --daemonize=no --log-target=journal Signal: 11 SourcePackage: pulseaudio StacktraceTop: _IceTransClose () from /lib/x86_64-linux-gnu/libICE.so.6 _IceFreeConnection () from /lib/x86_64-linux-gnu/libICE.so.6 IceCloseConnection () from /lib/x86_64-linux-gnu/libICE.so.6 SmcCloseConnection () from /lib/x86_64-linux-gnu/libSM.so.6 ?? () from /usr/lib/pulse-15.0+dfsg1/modules/module-x11-xsmp.so Title: pulseaudio crashed with SIGSEGV in _IceTransClose() UpgradeStatus: No upgrade log present (probably fresh install) UserGroups: adm cdrom dip lpadmin lxd plugdev sambashare sudo dmi.bios.date: 12/23/2020 dmi.bios.release: 1.51 dmi.bios.vendor: LENOVO dmi.bios.version: DKCN51WW dmi.board.asset.tag: NO Asset Tag dmi.board.name: LNVNB161216 dmi.board.vendor: LENOVO dmi.board.version: SDK0J40700 WIN dmi.chassis.asset.tag: NO Asset Tag dmi.chassis.type: 10 dmi.chassis.vendor: LENOVO dmi.chassis.version: Lenovo V14-IIL dmi.ec.firmware.release: 1.51 dmi.modalias: dmi:bvnLENOVO:bvrDKCN51WW:bd12/23/2020:br1.51:efr1.51:svnLENOVO:pn82C4:pvrLenovoV14-IIL:skuLENOVO_MT_82C4_BU_idea_FM_V14-IIL:rvnLENOVO:rnLNVNB161216:rvrSDK0J40700WIN:cvnLENOVO:ct10:cvrLenovoV14-IIL: dmi.product.family: V14-IIL dmi.product.name: 82C4 dmi.product.sku: LENOVO_MT_82C4_BU_idea_FM_V14-IIL dmi.product.version: Lenovo V14-IIL dmi.sys.vendor: LENOVO separator: To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/pulseaudio/+bug/1942685/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1942685] [NEW] pulseaudio crashed with SIGSEGV in _IceTransClose()
Public bug reported: Installing Xubuntu Impish daily ISO 04092021 After install I rebooted - applied updates and then rebooted again- the errors (pulseaudio crashed with SIGSEGV in _IceTransClose() ) occurred after logging in. ProblemType: Crash DistroRelease: Ubuntu 21.10 Package: pulseaudio 1:15.0+dfsg1-1ubuntu2 ProcVersionSignature: Ubuntu 5.13.0-14.14-generic 5.13.1 Uname: Linux 5.13.0-14-generic x86_64 ApportVersion: 2.20.11-0ubuntu68 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: kx 847 F pulseaudio CasperMD5CheckResult: pass Date: Sat Sep 4 16:43:45 2021 ExecutablePath: /usr/bin/pulseaudio InstallationDate: Installed on 2021-09-04 (0 days ago) InstallationMedia: Xubuntu 21.10 "Impish Indri" - Alpha amd64 (20210904) ProcCmdline: /usr/bin/pulseaudio --daemonize=no --log-target=journal Signal: 11 SourcePackage: pulseaudio StacktraceTop: _IceTransClose () from /lib/x86_64-linux-gnu/libICE.so.6 _IceFreeConnection () from /lib/x86_64-linux-gnu/libICE.so.6 IceCloseConnection () from /lib/x86_64-linux-gnu/libICE.so.6 SmcCloseConnection () from /lib/x86_64-linux-gnu/libSM.so.6 ?? () from /usr/lib/pulse-15.0+dfsg1/modules/module-x11-xsmp.so Title: pulseaudio crashed with SIGSEGV in _IceTransClose() UpgradeStatus: No upgrade log present (probably fresh install) UserGroups: adm cdrom dip lpadmin lxd plugdev sambashare sudo dmi.bios.date: 12/23/2020 dmi.bios.release: 1.51 dmi.bios.vendor: LENOVO dmi.bios.version: DKCN51WW dmi.board.asset.tag: NO Asset Tag dmi.board.name: LNVNB161216 dmi.board.vendor: LENOVO dmi.board.version: SDK0J40700 WIN dmi.chassis.asset.tag: NO Asset Tag dmi.chassis.type: 10 dmi.chassis.vendor: LENOVO dmi.chassis.version: Lenovo V14-IIL dmi.ec.firmware.release: 1.51 dmi.modalias: dmi:bvnLENOVO:bvrDKCN51WW:bd12/23/2020:br1.51:efr1.51:svnLENOVO:pn82C4:pvrLenovoV14-IIL:skuLENOVO_MT_82C4_BU_idea_FM_V14-IIL:rvnLENOVO:rnLNVNB161216:rvrSDK0J40700WIN:cvnLENOVO:ct10:cvrLenovoV14-IIL: dmi.product.family: V14-IIL dmi.product.name: 82C4 dmi.product.sku: LENOVO_MT_82C4_BU_idea_FM_V14-IIL dmi.product.version: Lenovo V14-IIL dmi.sys.vendor: LENOVO separator: ** Affects: pulseaudio (Ubuntu) Importance: Undecided Status: New ** Tags: amd64 apport-crash impish ** Information type changed from Private to Public -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to pulseaudio in Ubuntu. https://bugs.launchpad.net/bugs/1942685 Title: pulseaudio crashed with SIGSEGV in _IceTransClose() Status in pulseaudio package in Ubuntu: New Bug description: Installing Xubuntu Impish daily ISO 04092021 After install I rebooted - applied updates and then rebooted again- the errors (pulseaudio crashed with SIGSEGV in _IceTransClose() ) occurred after logging in. ProblemType: Crash DistroRelease: Ubuntu 21.10 Package: pulseaudio 1:15.0+dfsg1-1ubuntu2 ProcVersionSignature: Ubuntu 5.13.0-14.14-generic 5.13.1 Uname: Linux 5.13.0-14-generic x86_64 ApportVersion: 2.20.11-0ubuntu68 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: kx 847 F pulseaudio CasperMD5CheckResult: pass Date: Sat Sep 4 16:43:45 2021 ExecutablePath: /usr/bin/pulseaudio InstallationDate: Installed on 2021-09-04 (0 days ago) InstallationMedia: Xubuntu 21.10 "Impish Indri" - Alpha amd64 (20210904) ProcCmdline: /usr/bin/pulseaudio --daemonize=no --log-target=journal Signal: 11 SourcePackage: pulseaudio StacktraceTop: _IceTransClose () from /lib/x86_64-linux-gnu/libICE.so.6 _IceFreeConnection () from /lib/x86_64-linux-gnu/libICE.so.6 IceCloseConnection () from /lib/x86_64-linux-gnu/libICE.so.6 SmcCloseConnection () from /lib/x86_64-linux-gnu/libSM.so.6 ?? () from /usr/lib/pulse-15.0+dfsg1/modules/module-x11-xsmp.so Title: pulseaudio crashed with SIGSEGV in _IceTransClose() UpgradeStatus: No upgrade log present (probably fresh install) UserGroups: adm cdrom dip lpadmin lxd plugdev sambashare sudo dmi.bios.date: 12/23/2020 dmi.bios.release: 1.51 dmi.bios.vendor: LENOVO dmi.bios.version: DKCN51WW dmi.board.asset.tag: NO Asset Tag dmi.board.name: LNVNB161216 dmi.board.vendor: LENOVO dmi.board.version: SDK0J40700 WIN dmi.chassis.asset.tag: NO Asset Tag dmi.chassis.type: 10 dmi.chassis.vendor: LENOVO dmi.chassis.version: Lenovo V14-IIL dmi.ec.firmware.release: 1.51 dmi.modalias: dmi:bvnLENOVO:bvrDKCN51WW:bd12/23/2020:br1.51:efr1.51:svnLENOVO:pn82C4:pvrLenovoV14-IIL:skuLENOVO_MT_82C4_BU_idea_FM_V14-IIL:rvnLENOVO:rnLNVNB161216:rvrSDK0J40700WIN:cvnLENOVO:ct10:cvrLenovoV14-IIL: dmi.product.family: V14-IIL dmi.product.name: 82C4 dmi.product.sku: LENOVO_MT_82C4_BU_idea_FM_V14-IIL dmi.product.version: Lenovo V14-IIL dmi.sys.vendor: LENOVO separator: To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/pulseaudio/+bug/19
[Touch-packages] [Bug 1795278] Re: software-properties-{qt, kde} attempts to use KUrl but it doesn't exist
Confirm that this still occuring in Lubuntu Impish - tested daily ISO 2021-08-04 http://cdimage.ubuntu.com/lubuntu/daily-live/20210804/impish-desktop-amd64.iso -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to software-properties in Ubuntu. https://bugs.launchpad.net/bugs/1795278 Title: software-properties-{qt,kde} attempts to use KUrl but it doesn't exist Status in software-properties package in Ubuntu: Triaged Bug description: Release: Kubuntu 18.04 Version: 0.96.24.32.1 When clicking the "Import Key" button in the "Authentication" section of the panel it throws this error: Traceback (most recent call last): File "/usr/lib/python3/dist-packages/softwareproperties/kde/SoftwarePropertiesKDE.py", line 667, in add_key_clicked url = KUrl.fromPath(home) NameError: name 'KUrl' is not defined While this doesn't crash the program it causes nothing to happen when clicking the button. Running the program in a terminal reveals the error being printed to stderr. After debugging it appears KUrl doesn't exist anywhere and I'm not sure if's a python module that has changed. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/software-properties/+bug/1795278/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1930447] [NEW] Unable to turn on bluetooth
Public bug reported: Testing Ubuntu Impish daily ISO 01-06-2021 0n QA tracking site - After successful install go to settings "Bluetooth" and select the on tab in upper right hand corner and nothing happens. This maybe related to bug # 1928924 https://bugs.launchpad.net/ubuntu/+source/bluedevil/+bug/1928924 ProblemType: Bug DistroRelease: Ubuntu 21.10 Package: bluez 5.58-0ubuntu1 ProcVersionSignature: Ubuntu 5.11.0-16.17-generic 5.11.12 Uname: Linux 5.11.0-16-generic x86_64 ApportVersion: 2.20.11-0ubuntu67 Architecture: amd64 CasperMD5CheckResult: pass CurrentDesktop: ubuntu:GNOME Date: Tue Jun 1 16:30:07 2021 InstallationDate: Installed on 2021-06-01 (0 days ago) InstallationMedia: Ubuntu 21.10 "Impish Indri" - Alpha amd64 (20210601) InterestingModules: rfcomm bnep btusb bluetooth MachineType: LENOVO 82C4 ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-5.11.0-16-generic root=UUID=efd131f1-9709-400b-9f5d-d72be1df3885 ro quiet splash vt.handoff=7 SourcePackage: bluez UpgradeStatus: No upgrade log present (probably fresh install) dmi.bios.date: 12/23/2020 dmi.bios.release: 1.51 dmi.bios.vendor: LENOVO dmi.bios.version: DKCN51WW dmi.board.asset.tag: NO Asset Tag dmi.board.name: LNVNB161216 dmi.board.vendor: LENOVO dmi.board.version: SDK0J40700 WIN dmi.chassis.asset.tag: NO Asset Tag dmi.chassis.type: 10 dmi.chassis.vendor: LENOVO dmi.chassis.version: Lenovo V14-IIL dmi.ec.firmware.release: 1.51 dmi.modalias: dmi:bvnLENOVO:bvrDKCN51WW:bd12/23/2020:br1.51:efr1.51:svnLENOVO:pn82C4:pvrLenovoV14-IIL:rvnLENOVO:rnLNVNB161216:rvrSDK0J40700WIN:cvnLENOVO:ct10:cvrLenovoV14-IIL: dmi.product.family: V14-IIL dmi.product.name: 82C4 dmi.product.sku: LENOVO_MT_82C4_BU_idea_FM_V14-IIL dmi.product.version: Lenovo V14-IIL dmi.sys.vendor: LENOVO hciconfig: hci0: Type: Primary Bus: USB BD Address: 28:39:26:D5:7D:8E ACL MTU: 1021:6 SCO MTU: 255:12 DOWN RX bytes:1682 acl:0 sco:0 events:183 errors:0 TX bytes:36490 acl:0 sco:0 commands:183 errors:0 ** Affects: bluez (Ubuntu) Importance: Undecided Status: New ** Tags: amd64 apport-bug impish wayland-session -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to bluez in Ubuntu. https://bugs.launchpad.net/bugs/1930447 Title: Unable to turn on bluetooth Status in bluez package in Ubuntu: New Bug description: Testing Ubuntu Impish daily ISO 01-06-2021 0n QA tracking site - After successful install go to settings "Bluetooth" and select the on tab in upper right hand corner and nothing happens. This maybe related to bug # 1928924 https://bugs.launchpad.net/ubuntu/+source/bluedevil/+bug/1928924 ProblemType: Bug DistroRelease: Ubuntu 21.10 Package: bluez 5.58-0ubuntu1 ProcVersionSignature: Ubuntu 5.11.0-16.17-generic 5.11.12 Uname: Linux 5.11.0-16-generic x86_64 ApportVersion: 2.20.11-0ubuntu67 Architecture: amd64 CasperMD5CheckResult: pass CurrentDesktop: ubuntu:GNOME Date: Tue Jun 1 16:30:07 2021 InstallationDate: Installed on 2021-06-01 (0 days ago) InstallationMedia: Ubuntu 21.10 "Impish Indri" - Alpha amd64 (20210601) InterestingModules: rfcomm bnep btusb bluetooth MachineType: LENOVO 82C4 ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-5.11.0-16-generic root=UUID=efd131f1-9709-400b-9f5d-d72be1df3885 ro quiet splash vt.handoff=7 SourcePackage: bluez UpgradeStatus: No upgrade log present (probably fresh install) dmi.bios.date: 12/23/2020 dmi.bios.release: 1.51 dmi.bios.vendor: LENOVO dmi.bios.version: DKCN51WW dmi.board.asset.tag: NO Asset Tag dmi.board.name: LNVNB161216 dmi.board.vendor: LENOVO dmi.board.version: SDK0J40700 WIN dmi.chassis.asset.tag: NO Asset Tag dmi.chassis.type: 10 dmi.chassis.vendor: LENOVO dmi.chassis.version: Lenovo V14-IIL dmi.ec.firmware.release: 1.51 dmi.modalias: dmi:bvnLENOVO:bvrDKCN51WW:bd12/23/2020:br1.51:efr1.51:svnLENOVO:pn82C4:pvrLenovoV14-IIL:rvnLENOVO:rnLNVNB161216:rvrSDK0J40700WIN:cvnLENOVO:ct10:cvrLenovoV14-IIL: dmi.product.family: V14-IIL dmi.product.name: 82C4 dmi.product.sku: LENOVO_MT_82C4_BU_idea_FM_V14-IIL dmi.product.version: Lenovo V14-IIL dmi.sys.vendor: LENOVO hciconfig: hci0:Type: Primary Bus: USB BD Address: 28:39:26:D5:7D:8E ACL MTU: 1021:6 SCO MTU: 255:12 DOWN RX bytes:1682 acl:0 sco:0 events:183 errors:0 TX bytes:36490 acl:0 sco:0 commands:183 errors:0 To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/bluez/+bug/1930447/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1920665] Re: Ubiquity KDE crash on try/install and from live session with "malloc(): unaligned tcache chunk detected"
I can confirm the fix works. Tested daily ISO Kubuntu Hirsute ISO 20210409 with VirtualBox and no errors. See results here: http://iso.qa.ubuntu.com/qatracker/milestones/419/builds/229247/testcases/1300/results -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to mesa in Ubuntu. https://bugs.launchpad.net/bugs/1920665 Title: Ubiquity KDE crash on try/install and from live session with "malloc(): unaligned tcache chunk detected" Status in mesa package in Ubuntu: Fix Released Status in ubiquity package in Ubuntu: Incomplete Status in mesa source package in Hirsute: Fix Released Status in ubiquity source package in Hirsute: Incomplete Bug description: ProblemType: Bug DistroRelease: Ubuntu 21.04 Package: ubiquity 21.04.11 ProcVersionSignature: Ubuntu 5.11.0-11.12-generic 5.11.0 Uname: Linux 5.11.0-11-generic x86_64 ApportVersion: 2.20.11-0ubuntu60 Architecture: amd64 CasperMD5CheckResult: pass CasperVersion: 1.460 CurrentDesktop: KDE Date: Sun Mar 21 11:53:44 2021 InstallCmdLine: BOOT_IMAGE=/casper/vmlinuz file=/cdrom/preseed/kubuntu.seed maybe-ubiquity quiet splash --- LiveMediaBuild: Kubuntu 21.04 "Hirsute Hippo" - Alpha amd64 (20210321) SourcePackage: ubiquity UpgradeStatus: No upgrade log present (probably fresh install) Since approximately 16/03/2021 ubiquity from maybe-ubiquity (try install screen) and from the live session is crashing on launch or shortly after. Cases where the crash can be triggered: - Using a Virtualbox VM, where graphics acceleration is handled by mesa with LLVMPIPE - Start the ISO on real hardware in 'safe graphics mode' Cases where the crash is not encountered: - Start the ISO on real intel (HD graphics) hardware with full acceleration. NOTE: The crash can be avoided by downgrading MESA 21.0.x packages to the previous 20.3.4 in hirsute. Try/Install crash: Screen fails to start, or starts then crashes on any user action. The user is presented with: "Installation failed - The installer encountered an unrecoverable error. A desktop session will now be run so that you may investigate the problem or try installing again" Live session crash: The installer does not start from the desktop icon. Starting ubiquity from the terminal results in an "Aborted (core dumped)" message and nothing else. The crash is most commonly "malloc(): unaligned tcache chunk detected", but inevitably from this sort of memory issue can be something like "realloc(): invalid next size" An example /var/log/installer/debug log from a session where both crashes were triggered is below. /var/log/installer/debug Ubiquity 21.04.11 TEXT If more than one person will use this computer, you can set up multiple accounts after installation. TEXT Enter the same password twice, so that it can be checked for typing errors. TEXT The name it uses when it talks to other computers. TEXT Enter the same password twice, so that it can be checked for typing errors. TEXT Enter the same password twice, so that it can be checked for typing errors. TEXT If more than one person will use this computer, you can set up multiple accounts after installation. TEXT Enter the same password twice, so that it can be checked for typing errors. TEXT The name it uses when it talks to other computers. QSocketNotifier: Invalid socket 17 and type 'Read', disabling... QSocketNotifier: Invalid socket 17 and type 'Write', disabling... QSocketNotifier: Invalid socket 17 and type 'Exception', disabling... Your console font configuration will be updated the next time your system boots. If you want to update it now, run 'setupcon' from a virtual console. update-initramfs is disabled since running on read-only media debconf: DbDriver "passwords" warning: could not open /var/cache/debconf/passwords.dat: Permission denied munmap_chunk(): invalid pointer Ubiquity 21.04.11 QStandardPaths: XDG_RUNTIME_DIR not set, defaulting to '/tmp/runtime-kubuntu' QStandardPaths: XDG_RUNTIME_DIR not set, defaulting to '/tmp/runtime-kubuntu' QStandardPaths: XDG_RUNTIME_DIR not set, defaulting to '/tmp/runtime-kubuntu' TEXT If more than one person will use this computer, you can set up multiple accounts after installation. TEXT Enter the same password twice, so that it can be checked for typing errors. TEXT The name it uses when it talks to other computers. TEXT Enter the same password twice, so that it can be checked for typing errors. malloc(): unaligned tcache chunk detected To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/mesa/+bug/1920665/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1920665] Re: Ubiquity KDE crash on try/install and from live session with "malloc(): unaligned tcache chunk detected"
@rikmills Tested your suggestion in comment #35 and installed with no errors. -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to mesa in Ubuntu. https://bugs.launchpad.net/bugs/1920665 Title: Ubiquity KDE crash on try/install and from live session with "malloc(): unaligned tcache chunk detected" Status in mesa package in Ubuntu: Confirmed Status in ubiquity package in Ubuntu: Incomplete Status in mesa source package in Hirsute: Confirmed Status in ubiquity source package in Hirsute: Incomplete Bug description: ProblemType: Bug DistroRelease: Ubuntu 21.04 Package: ubiquity 21.04.11 ProcVersionSignature: Ubuntu 5.11.0-11.12-generic 5.11.0 Uname: Linux 5.11.0-11-generic x86_64 ApportVersion: 2.20.11-0ubuntu60 Architecture: amd64 CasperMD5CheckResult: pass CasperVersion: 1.460 CurrentDesktop: KDE Date: Sun Mar 21 11:53:44 2021 InstallCmdLine: BOOT_IMAGE=/casper/vmlinuz file=/cdrom/preseed/kubuntu.seed maybe-ubiquity quiet splash --- LiveMediaBuild: Kubuntu 21.04 "Hirsute Hippo" - Alpha amd64 (20210321) SourcePackage: ubiquity UpgradeStatus: No upgrade log present (probably fresh install) Since approximately 16/03/2021 ubiquity from maybe-ubiquity (try install screen) and from the live session is crashing on launch or shortly after. Cases where the crash can be triggered: - Using a Virtualbox VM, where graphics acceleration is handled by mesa with LLVMPIPE - Start the ISO on real hardware in 'safe graphics mode' Cases where the crash is not encountered: - Start the ISO on real intel (HD graphics) hardware with full acceleration. NOTE: The crash can be avoided by downgrading MESA 21.0.x packages to the previous 20.3.4 in hirsute. Try/Install crash: Screen fails to start, or starts then crashes on any user action. The user is presented with: "Installation failed - The installer encountered an unrecoverable error. A desktop session will now be run so that you may investigate the problem or try installing again" Live session crash: The installer does not start from the desktop icon. Starting ubiquity from the terminal results in an "Aborted (core dumped)" message and nothing else. The crash is most commonly "malloc(): unaligned tcache chunk detected", but inevitably from this sort of memory issue can be something like "realloc(): invalid next size" An example /var/log/installer/debug log from a session where both crashes were triggered is below. /var/log/installer/debug Ubiquity 21.04.11 TEXT If more than one person will use this computer, you can set up multiple accounts after installation. TEXT Enter the same password twice, so that it can be checked for typing errors. TEXT The name it uses when it talks to other computers. TEXT Enter the same password twice, so that it can be checked for typing errors. TEXT Enter the same password twice, so that it can be checked for typing errors. TEXT If more than one person will use this computer, you can set up multiple accounts after installation. TEXT Enter the same password twice, so that it can be checked for typing errors. TEXT The name it uses when it talks to other computers. QSocketNotifier: Invalid socket 17 and type 'Read', disabling... QSocketNotifier: Invalid socket 17 and type 'Write', disabling... QSocketNotifier: Invalid socket 17 and type 'Exception', disabling... Your console font configuration will be updated the next time your system boots. If you want to update it now, run 'setupcon' from a virtual console. update-initramfs is disabled since running on read-only media debconf: DbDriver "passwords" warning: could not open /var/cache/debconf/passwords.dat: Permission denied munmap_chunk(): invalid pointer Ubiquity 21.04.11 QStandardPaths: XDG_RUNTIME_DIR not set, defaulting to '/tmp/runtime-kubuntu' QStandardPaths: XDG_RUNTIME_DIR not set, defaulting to '/tmp/runtime-kubuntu' QStandardPaths: XDG_RUNTIME_DIR not set, defaulting to '/tmp/runtime-kubuntu' TEXT If more than one person will use this computer, you can set up multiple accounts after installation. TEXT Enter the same password twice, so that it can be checked for typing errors. TEXT The name it uses when it talks to other computers. TEXT Enter the same password twice, so that it can be checked for typing errors. malloc(): unaligned tcache chunk detected To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/mesa/+bug/1920665/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1795278] Re: software-properties-{qt, kde} attempts to use KUrl but it doesn't exist
@wxl This is still occuring on Lubuntu Hirsute daily ISO 2021-03-26. Tested also Ubuntu Mate and Xubuntu same date and no error. -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to software-properties in Ubuntu. https://bugs.launchpad.net/bugs/1795278 Title: software-properties-{qt,kde} attempts to use KUrl but it doesn't exist Status in software-properties package in Ubuntu: Triaged Bug description: Release: Kubuntu 18.04 Version: 0.96.24.32.1 When clicking the "Import Key" button in the "Authentication" section of the panel it throws this error: Traceback (most recent call last): File "/usr/lib/python3/dist-packages/softwareproperties/kde/SoftwarePropertiesKDE.py", line 667, in add_key_clicked url = KUrl.fromPath(home) NameError: name 'KUrl' is not defined While this doesn't crash the program it causes nothing to happen when clicking the button. Running the program in a terminal reveals the error being printed to stderr. After debugging it appears KUrl doesn't exist anywhere and I'm not sure if's a python module that has changed. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/software-properties/+bug/1795278/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1920665] Re: Ubiquity KDE crash on try/install and from live session with "malloc(): unaligned tcache chunk detected"
@rikmills Crash in VirtualBox but real hardware (Lenovo 450) no crash ISO 2021-03-23 same as yr comment #6 -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to mesa in Ubuntu. https://bugs.launchpad.net/bugs/1920665 Title: Ubiquity KDE crash on try/install and from live session with "malloc(): unaligned tcache chunk detected" Status in mesa package in Ubuntu: New Status in ubiquity package in Ubuntu: New Status in mesa source package in Hirsute: New Status in ubiquity source package in Hirsute: New Bug description: ProblemType: Bug DistroRelease: Ubuntu 21.04 Package: ubiquity 21.04.11 ProcVersionSignature: Ubuntu 5.11.0-11.12-generic 5.11.0 Uname: Linux 5.11.0-11-generic x86_64 ApportVersion: 2.20.11-0ubuntu60 Architecture: amd64 CasperMD5CheckResult: pass CasperVersion: 1.460 CurrentDesktop: KDE Date: Sun Mar 21 11:53:44 2021 InstallCmdLine: BOOT_IMAGE=/casper/vmlinuz file=/cdrom/preseed/kubuntu.seed maybe-ubiquity quiet splash --- LiveMediaBuild: Kubuntu 21.04 "Hirsute Hippo" - Alpha amd64 (20210321) SourcePackage: ubiquity UpgradeStatus: No upgrade log present (probably fresh install) Since approximately 16/03/2021 ubiquity from maybe-ubiquity (try install screen) and from the live session is crashing on launch or shortly after. Try/Install crash: Screen fails to start, or starts then crashes on any user action. The user is presented with: "Installation failed - The installer encountered an unrecoverable error. A desktop session will now be run so that you may investigate the problem or try installing again" Live session crash: The installer does not start from the desktop icon. Starting ubiquity from the terminal results in an "Aborted (core dumped)" message and nothing else. An example /var/log/installer/debug log from a session where both crashes were triggered is below. /var/log/installer/debug Ubiquity 21.04.11 TEXT If more than one person will use this computer, you can set up multiple accounts after installation. TEXT Enter the same password twice, so that it can be checked for typing errors. TEXT The name it uses when it talks to other computers. TEXT Enter the same password twice, so that it can be checked for typing errors. TEXT Enter the same password twice, so that it can be checked for typing errors. TEXT If more than one person will use this computer, you can set up multiple accounts after installation. TEXT Enter the same password twice, so that it can be checked for typing errors. TEXT The name it uses when it talks to other computers. QSocketNotifier: Invalid socket 17 and type 'Read', disabling... QSocketNotifier: Invalid socket 17 and type 'Write', disabling... QSocketNotifier: Invalid socket 17 and type 'Exception', disabling... Your console font configuration will be updated the next time your system boots. If you want to update it now, run 'setupcon' from a virtual console. update-initramfs is disabled since running on read-only media debconf: DbDriver "passwords" warning: could not open /var/cache/debconf/passwords.dat: Permission denied munmap_chunk(): invalid pointer Ubiquity 21.04.11 QStandardPaths: XDG_RUNTIME_DIR not set, defaulting to '/tmp/runtime-kubuntu' QStandardPaths: XDG_RUNTIME_DIR not set, defaulting to '/tmp/runtime-kubuntu' QStandardPaths: XDG_RUNTIME_DIR not set, defaulting to '/tmp/runtime-kubuntu' TEXT If more than one person will use this computer, you can set up multiple accounts after installation. TEXT Enter the same password twice, so that it can be checked for typing errors. TEXT The name it uses when it talks to other computers. TEXT Enter the same password twice, so that it can be checked for typing errors. malloc(): unaligned tcache chunk detected To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/mesa/+bug/1920665/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1914461] [NEW] Unable to import key file in "authentication" in Software sources"
Public bug reported: Running test on Lubuntu Hirsute daily ISO from QA testing tracker http://cdimage.ubuntu.com/lubuntu/daily-live/20210203/hirsute-desktop- amd64.iso Unable to import key file in "authentication tab" - no error message received Steps to produce the bug 1. Open Software Sources from Preferences menu 2. Go to "Authentication" tab 3. Select/Click on "+Import Key File" 4. Nothing happens and no error message is received The file manager should have opened and browsed for the key to import ProblemType: Bug DistroRelease: Ubuntu 21.04 Package: software-properties-qt 0.99.5 ProcVersionSignature: Ubuntu 5.8.0-36.40+21.04.1-generic 5.8.18 Uname: Linux 5.8.0-36-generic x86_64 ApportVersion: 2.20.11-0ubuntu57 Architecture: amd64 CasperMD5CheckResult: unknown CurrentDesktop: LXQt Date: Wed Feb 3 18:37:11 2021 InstallationDate: Installed on 2021-02-03 (0 days ago) InstallationMedia: Lubuntu 21.04 "Hirsute Hippo" - Alpha amd64 (20210203) PackageArchitecture: all SourcePackage: software-properties UpgradeStatus: No upgrade log present (probably fresh install) ** Affects: software-properties (Ubuntu) Importance: Undecided Status: New ** Tags: amd64 apport-bug hirsute -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to software-properties in Ubuntu. https://bugs.launchpad.net/bugs/1914461 Title: Unable to import key file in "authentication" in Software sources" Status in software-properties package in Ubuntu: New Bug description: Running test on Lubuntu Hirsute daily ISO from QA testing tracker http://cdimage.ubuntu.com/lubuntu/daily-live/20210203/hirsute-desktop- amd64.iso Unable to import key file in "authentication tab" - no error message received Steps to produce the bug 1. Open Software Sources from Preferences menu 2. Go to "Authentication" tab 3. Select/Click on "+Import Key File" 4. Nothing happens and no error message is received The file manager should have opened and browsed for the key to import ProblemType: Bug DistroRelease: Ubuntu 21.04 Package: software-properties-qt 0.99.5 ProcVersionSignature: Ubuntu 5.8.0-36.40+21.04.1-generic 5.8.18 Uname: Linux 5.8.0-36-generic x86_64 ApportVersion: 2.20.11-0ubuntu57 Architecture: amd64 CasperMD5CheckResult: unknown CurrentDesktop: LXQt Date: Wed Feb 3 18:37:11 2021 InstallationDate: Installed on 2021-02-03 (0 days ago) InstallationMedia: Lubuntu 21.04 "Hirsute Hippo" - Alpha amd64 (20210203) PackageArchitecture: all SourcePackage: software-properties UpgradeStatus: No upgrade log present (probably fresh install) To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/software-properties/+bug/1914461/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1871182] Re: [RTL810xE] No ethernet connection
I can also confirm that kernel 5.4.0-26 solved the problem. Retested and all as should be. -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to initramfs-tools in Ubuntu. https://bugs.launchpad.net/bugs/1871182 Title: [RTL810xE] No ethernet connection Status in initramfs-tools package in Ubuntu: Confirmed Status in linux package in Ubuntu: Fix Released Bug description: ubuntu doesn't show cable plugged-in. Wifi is also intermittent. Errors in log with realtek. long boot up. No problems with live-USB or fresh install, only after update. sudo lspci -vnvn > lspci-vnvn.log pcilib: sysfs_read_vpd: read failed: Input/output error ProblemType: Bug DistroRelease: Ubuntu 20.04 Package: linux-headers-5.4.0-22-generic 5.4.0-22.26 ProcVersionSignature: Ubuntu 5.4.0-22.26-generic 5.4.29 Uname: Linux 5.4.0-22-generic x86_64 ApportVersion: 2.20.11-0ubuntu24 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC1: finisdiem 1332 F pulseaudio /dev/snd/controlC0: finisdiem 1332 F pulseaudio CurrentDesktop: ubuntu:GNOME Date: Mon Apr 6 10:49:03 2020 InstallationDate: Installed on 2020-04-01 (4 days ago) InstallationMedia: Ubuntu 20.04 LTS "Focal Fossa" - Beta amd64 (20200331) MachineType: Hewlett-Packard HP Pavilion g6 Notebook PC ProcEnviron: PATH=(custom, no user) XDG_RUNTIME_DIR= LANG=en_US.UTF-8 SHELL=/bin/bash ProcFB: 0 radeondrmfb ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-5.4.0-22-generic root=UUID=e2543a6c-bc86-40b3-a4dd-d9e29603fb52 ro quiet splash vt.handoff=7 RelatedPackageVersions: linux-restricted-modules-5.4.0-22-generic N/A linux-backports-modules-5.4.0-22-generic N/A linux-firmware1.187 RfKill: 0: phy0: Wireless LAN Soft blocked: no Hard blocked: no SourcePackage: linux UpgradeStatus: No upgrade log present (probably fresh install) dmi.bios.date: 10/04/2012 dmi.bios.vendor: Insyde dmi.bios.version: F.15 dmi.board.asset.tag: Base Board Asset Tag dmi.board.name: 1849 dmi.board.vendor: Hewlett-Packard dmi.board.version: 57.2F dmi.chassis.type: 10 dmi.chassis.vendor: Hewlett-Packard dmi.chassis.version: Chassis Version dmi.modalias: dmi:bvnInsyde:bvrF.15:bd10/04/2012:svnHewlett-Packard:pnHPPaviliong6NotebookPC:pvr088B1130591620100:rvnHewlett-Packard:rn1849:rvr57.2F:cvnHewlett-Packard:ct10:cvrChassisVersion: dmi.product.family: 103C_5335KV G=N L=CON B=HP S=PAV dmi.product.name: HP Pavilion g6 Notebook PC dmi.product.sku: C2N51UA#ABA dmi.product.version: 088B1130591620100 dmi.sys.vendor: Hewlett-Packard To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/initramfs-tools/+bug/1871182/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1873360] [NEW] Ethernet driver not loaded at boot
Public bug reported: Running a test on Focal Daily build 16.04.2020 the ethernet driver was not loaded at boot - attached is the dmesg.log - the machine was a Dell [Inspiron] 3521, (i3-3217U, 4GB, Intel HD Graphics 4000, Intel HM76 chipset 10/100 Mbps ethernet controller integrated on system board, WiFi 802.11 b/g/N, ** Affects: network-manager (Ubuntu) Importance: Undecided Status: New ** Attachment added: "dmesg" https://bugs.launchpad.net/bugs/1873360/+attachment/5355779/+files/dmesg -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to network-manager in Ubuntu. https://bugs.launchpad.net/bugs/1873360 Title: Ethernet driver not loaded at boot Status in network-manager package in Ubuntu: New Bug description: Running a test on Focal Daily build 16.04.2020 the ethernet driver was not loaded at boot - attached is the dmesg.log - the machine was a Dell [Inspiron] 3521, (i3-3217U, 4GB, Intel HD Graphics 4000, Intel HM76 chipset 10/100 Mbps ethernet controller integrated on system board, WiFi 802.11 b/g/N, To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/network-manager/+bug/1873360/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1864526] Re: Display ghosting when dragging icons or opening menus
Further to my initial report -- I have also tested with another monitor Dell U3419W with the same results. -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to xorg in Ubuntu. https://bugs.launchpad.net/bugs/1864526 Title: Display ghosting when dragging icons or opening menus Status in xorg package in Ubuntu: New Bug description: Display ghosting when dragging icons or opening menus. Have tested several machines and this only occurring on Intel NUC 8i3BEK - and only when installing or using FOCAL Lubuntu 20.04 . This also is occurring in the Live sessions before install. I have tested Lubuntu Eoan 19.01 and Lubuntu Bionic 18.04.04 on this machine and cannot reproduce the issue. ProblemType: Bug DistroRelease: Ubuntu 20.04 Package: xorg 1:7.7+19ubuntu14 ProcVersionSignature: Ubuntu 5.4.0-14.17-generic 5.4.18 Uname: Linux 5.4.0-14-generic x86_64 ApportVersion: 2.20.11-0ubuntu18 Architecture: amd64 BootLog: Error: [Errno 13] Permission denied: '/var/log/boot.log' CompositorRunning: None CurrentDesktop: LXQt Date: Mon Feb 24 18:23:21 2020 DistUpgraded: Fresh install DistroCodename: focal DistroVariant: ubuntu ExtraDebuggingInterest: Yes GraphicsCard: Intel Corporation Iris Plus Graphics 655 [8086:3ea5] (rev 01) (prog-if 00 [VGA controller]) Subsystem: Intel Corporation Iris Plus Graphics 655 [8086:2074] InstallationDate: Installed on 2020-02-24 (0 days ago) InstallationMedia: Lubuntu 20.04 LTS "Focal Fossa" - Alpha amd64 (20200224) Lsusb: Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub Bus 001 Device 003: ID 04f2:0402 Chicony Electronics Co., Ltd Genius LuxeMate i200 Keyboard Bus 001 Device 002: ID 2188:0ae1 USB OPTICAL MOUSE Bus 001 Device 004: ID 8087:0aaa Intel Corp. Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub MachineType: Intel(R) Client Systems NUC8i3BEK ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-5.4.0-14-generic root=UUID=11c10d68-db79-4d45-9bbe-8357e125b46b ro quiet splash vt.handoff=7 SourcePackage: xorg UpgradeStatus: No upgrade log present (probably fresh install) dmi.bios.date: 06/18/2019 dmi.bios.vendor: Intel Corp. dmi.bios.version: BECFL357.86A.0073.2019.0618.1409 dmi.board.name: NUC8BEB dmi.board.vendor: Intel Corporation dmi.board.version: J72693-307 dmi.chassis.type: 35 dmi.chassis.vendor: Intel Corporation dmi.chassis.version: 2.0 dmi.modalias: dmi:bvnIntelCorp.:bvrBECFL357.86A.0073.2019.0618.1409:bd06/18/2019:svnIntel(R)ClientSystems:pnNUC8i3BEK:pvrJ72748-306:rvnIntelCorporation:rnNUC8BEB:rvrJ72693-307:cvnIntelCorporation:ct35:cvr2.0: dmi.product.family: BE dmi.product.name: NUC8i3BEK dmi.product.sku: BOXNUC8i3BEK dmi.product.version: J72748-306 dmi.sys.vendor: Intel(R) Client Systems version.compiz: compiz N/A version.libdrm2: libdrm2 2.4.100-4 version.libgl1-mesa-dri: libgl1-mesa-dri 20.0.0-1ubuntu1 version.libgl1-mesa-glx: libgl1-mesa-glx N/A version.xserver-xorg-core: xserver-xorg-core 2:1.20.7-2ubuntu1 version.xserver-xorg-input-evdev: xserver-xorg-input-evdev N/A version.xserver-xorg-video-ati: xserver-xorg-video-ati 1:19.1.0-1 version.xserver-xorg-video-intel: xserver-xorg-video-intel 2:2.99.917+git20190815-1 version.xserver-xorg-video-nouveau: xserver-xorg-video-nouveau 1:1.0.16-1 To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/xorg/+bug/1864526/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1864526] [NEW] Display ghosting when dragging icons or opening menus
Public bug reported: Display ghosting when dragging icons or opening menus. Have tested several machines and this only occurring on Intel NUC 8i3BEK - and only when installing or using FOCAL Lubuntu 20.04 . This also is occurring in the Live sessions before install. I have tested Lubuntu Eoan 19.01 and Lubuntu Bionic 18.04.04 on this machine and cannot reproduce the issue. ProblemType: Bug DistroRelease: Ubuntu 20.04 Package: xorg 1:7.7+19ubuntu14 ProcVersionSignature: Ubuntu 5.4.0-14.17-generic 5.4.18 Uname: Linux 5.4.0-14-generic x86_64 ApportVersion: 2.20.11-0ubuntu18 Architecture: amd64 BootLog: Error: [Errno 13] Permission denied: '/var/log/boot.log' CompositorRunning: None CurrentDesktop: LXQt Date: Mon Feb 24 18:23:21 2020 DistUpgraded: Fresh install DistroCodename: focal DistroVariant: ubuntu ExtraDebuggingInterest: Yes GraphicsCard: Intel Corporation Iris Plus Graphics 655 [8086:3ea5] (rev 01) (prog-if 00 [VGA controller]) Subsystem: Intel Corporation Iris Plus Graphics 655 [8086:2074] InstallationDate: Installed on 2020-02-24 (0 days ago) InstallationMedia: Lubuntu 20.04 LTS "Focal Fossa" - Alpha amd64 (20200224) Lsusb: Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub Bus 001 Device 003: ID 04f2:0402 Chicony Electronics Co., Ltd Genius LuxeMate i200 Keyboard Bus 001 Device 002: ID 2188:0ae1 USB OPTICAL MOUSE Bus 001 Device 004: ID 8087:0aaa Intel Corp. Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub MachineType: Intel(R) Client Systems NUC8i3BEK ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-5.4.0-14-generic root=UUID=11c10d68-db79-4d45-9bbe-8357e125b46b ro quiet splash vt.handoff=7 SourcePackage: xorg UpgradeStatus: No upgrade log present (probably fresh install) dmi.bios.date: 06/18/2019 dmi.bios.vendor: Intel Corp. dmi.bios.version: BECFL357.86A.0073.2019.0618.1409 dmi.board.name: NUC8BEB dmi.board.vendor: Intel Corporation dmi.board.version: J72693-307 dmi.chassis.type: 35 dmi.chassis.vendor: Intel Corporation dmi.chassis.version: 2.0 dmi.modalias: dmi:bvnIntelCorp.:bvrBECFL357.86A.0073.2019.0618.1409:bd06/18/2019:svnIntel(R)ClientSystems:pnNUC8i3BEK:pvrJ72748-306:rvnIntelCorporation:rnNUC8BEB:rvrJ72693-307:cvnIntelCorporation:ct35:cvr2.0: dmi.product.family: BE dmi.product.name: NUC8i3BEK dmi.product.sku: BOXNUC8i3BEK dmi.product.version: J72748-306 dmi.sys.vendor: Intel(R) Client Systems version.compiz: compiz N/A version.libdrm2: libdrm2 2.4.100-4 version.libgl1-mesa-dri: libgl1-mesa-dri 20.0.0-1ubuntu1 version.libgl1-mesa-glx: libgl1-mesa-glx N/A version.xserver-xorg-core: xserver-xorg-core 2:1.20.7-2ubuntu1 version.xserver-xorg-input-evdev: xserver-xorg-input-evdev N/A version.xserver-xorg-video-ati: xserver-xorg-video-ati 1:19.1.0-1 version.xserver-xorg-video-intel: xserver-xorg-video-intel 2:2.99.917+git20190815-1 version.xserver-xorg-video-nouveau: xserver-xorg-video-nouveau 1:1.0.16-1 ** Affects: xorg (Ubuntu) Importance: Undecided Status: New ** Tags: amd64 apport-bug focal reproducible ubuntu -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to xorg in Ubuntu. https://bugs.launchpad.net/bugs/1864526 Title: Display ghosting when dragging icons or opening menus Status in xorg package in Ubuntu: New Bug description: Display ghosting when dragging icons or opening menus. Have tested several machines and this only occurring on Intel NUC 8i3BEK - and only when installing or using FOCAL Lubuntu 20.04 . This also is occurring in the Live sessions before install. I have tested Lubuntu Eoan 19.01 and Lubuntu Bionic 18.04.04 on this machine and cannot reproduce the issue. ProblemType: Bug DistroRelease: Ubuntu 20.04 Package: xorg 1:7.7+19ubuntu14 ProcVersionSignature: Ubuntu 5.4.0-14.17-generic 5.4.18 Uname: Linux 5.4.0-14-generic x86_64 ApportVersion: 2.20.11-0ubuntu18 Architecture: amd64 BootLog: Error: [Errno 13] Permission denied: '/var/log/boot.log' CompositorRunning: None CurrentDesktop: LXQt Date: Mon Feb 24 18:23:21 2020 DistUpgraded: Fresh install DistroCodename: focal DistroVariant: ubuntu ExtraDebuggingInterest: Yes GraphicsCard: Intel Corporation Iris Plus Graphics 655 [8086:3ea5] (rev 01) (prog-if 00 [VGA controller]) Subsystem: Intel Corporation Iris Plus Graphics 655 [8086:2074] InstallationDate: Installed on 2020-02-24 (0 days ago) InstallationMedia: Lubuntu 20.04 LTS "Focal Fossa" - Alpha amd64 (20200224) Lsusb: Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub Bus 001 Device 003: ID 04f2:0402 Chicony Electronics Co., Ltd Genius LuxeMate i200 Keyboard Bus 001 Device 002: ID 2188:0ae1 USB OPTICAL MOUSE Bus 001 Device 004: ID 8087:0aaa Intel Corp. Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub MachineType: Intel(R) Client Systems NUC8i3BEK ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-5.4.0-14-generic root=UUID=11c10d68-db79-4d4
[Touch-packages] [Bug 1815354] [NEW] BCM 43142 driver not installed - no WiFi
Public bug reported: Disco daily Lubuntu 09.02.2019 and Disco daily Kubuntu 10.02.2019 BCM 43142 drivers not installed resulting in no WiFi during and after installation. I was able to attach ethernet cable and use the command line "ubuntu- drivers" command to install the drivers and all worked well after that. Of course if running a machine with no ethernet then this is a huge problem for the user. ** Affects: network-manager (Ubuntu) Importance: Undecided Status: New -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to network-manager in Ubuntu. https://bugs.launchpad.net/bugs/1815354 Title: BCM 43142 driver not installed - no WiFi Status in network-manager package in Ubuntu: New Bug description: Disco daily Lubuntu 09.02.2019 and Disco daily Kubuntu 10.02.2019 BCM 43142 drivers not installed resulting in no WiFi during and after installation. I was able to attach ethernet cable and use the command line "ubuntu- drivers" command to install the drivers and all worked well after that. Of course if running a machine with no ethernet then this is a huge problem for the user. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/network-manager/+bug/1815354/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp