[Touch-packages] [Bug 1364292] Re: 8086:2a42 [Toshiba Portégé R600-10Q] VGA output doesn't work with Intel GM45 chipset
Bug submitted at: https://bugs.freedesktop.org/show_bug.cgi?id=87951 ** Bug watch added: freedesktop.org Bugzilla #87951 https://bugs.freedesktop.org/show_bug.cgi?id=87951 -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to xorg in Ubuntu. https://bugs.launchpad.net/bugs/1364292 Title: 8086:2a42 [Toshiba Portégé R600-10Q] VGA output doesn't work with Intel GM45 chipset Status in xorg package in Ubuntu: Triaged Bug description: I have just installed Ubuntu 14.04 64-bit on my Toshiba Portege R600-10Q laptop (a model from 2009). I am now trying to display the desktop on a BenQ Senseye3 22 monitor, via the vga output, but it's not working - the monitor says No Signal Detected!. What I've done: I have gone into Screen Display, where I can see the monitor is detected by the laptop. The monitor has a 1920 x 1080 native resolution, which I have tried to use, but I have also set it to lower resolutions, e.g. 1024 x 576. I have tried to use the monitor in dual screen, mirrored and single screen mode - none work. I have tried pressing Fn + F5 to get single screen output - the laptop screen goes blank, but still no output on the monitor. I have tried several monitors (of the same type, and also of a different make), so I don't think it's that. If I plug the vga cable in after boot up, then the monitor receives no signal. WORKAROUND: If, and only if, the monitor was plugged in to the PC's VGA output during boot up, then the display outputs to the monitor correctly. The laptop has the Intel® GS45 Express chipset for graphics acceleration. I installed mesa-utils and ran glxinfo in a terminal. Amongst the output was: OpenGL renderer string: Mesa DRI Mobile Intel® GM45 Express Chipset Also, in the About This Computer window I see: Graphics: Mobile Intel® GM45 Express Chipset I wonder if the problem is that my chipset is GS45 not GM45. The output of sudo lshw -C video is: *-display:0 description: VGA compatible controller product: Mobile 4 Series Chipset Integrated Graphics Controller vendor: Intel Corporation physical id: 2 bus info: pci@:00:02.0 version: 07 width: 64 bits clock: 33MHz capabilities: msi pm vga_controller bus_master cap_list rom configuration: driver=i915 latency=0 resources: irq:44 memory:ff40-ff7f memory:e000-efff ioport:cff8(size=8) *-display:1 UNCLAIMED description: Display controller product: Mobile 4 Series Chipset Integrated Graphics Controller vendor: Intel Corporation physical id: 2.1 bus info: pci@:00:02.1 version: 07 width: 64 bits clock: 33MHz capabilities: pm bus_master cap_list configuration: latency=0 resources: memory:ffc0-ffcf ProblemType: Bug DistroRelease: Ubuntu 14.04 Package: xorg 1:7.7+1ubuntu8 ProcVersionSignature: Ubuntu 3.13.0-35.62-generic 3.13.11.6 Uname: Linux 3.13.0-35-generic x86_64 .tmp.unity.support.test.0: ApportVersion: 2.14.1-0ubuntu3.3 Architecture: amd64 CompizPlugins: No value set for `/apps/compiz-1/general/screen0/options/active_plugins' CompositorRunning: compiz CompositorUnredirectDriverBlacklist: '(nouveau|Intel).*Mesa 8.0' CompositorUnredirectFSW: true CurrentDesktop: Unity Date: Tue Sep 2 10:00:57 2014 DistUpgraded: Fresh install DistroCodename: trusty DistroVariant: ubuntu EcryptfsInUse: Yes ExtraDebuggingInterest: Yes, if not too technical GraphicsCard: Intel Corporation Mobile 4 Series Chipset Integrated Graphics Controller [8086:2a42] (rev 07) (prog-if 00 [VGA controller]) Subsystem: Toshiba America Info Systems Device [1179:000c] Subsystem: Toshiba America Info Systems Device [1179:000c] InstallationDate: Installed on 2014-08-28 (4 days ago) InstallationMedia: Ubuntu 14.04.1 LTS Trusty Tahr - Release amd64 (20140722.2) MachineType: TOSHIBA PORTEGE R600 ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.13.0-35-generic root=UUID=fe977943-4013-472e-b627-f7184c9e190f ro quiet splash vt.handoff=7 SourcePackage: xorg UpgradeStatus: No upgrade log present (probably fresh install) dmi.bios.date: 11/27/2008 dmi.bios.vendor: TOSHIBA dmi.bios.version: Version 1.60 dmi.board.asset.tag: 00 dmi.board.name: Portable PC dmi.board.vendor: TOSHIBA dmi.board.version: Version A0 dmi.chassis.asset.tag: 00 dmi.chassis.type: 10 dmi.chassis.vendor: TOSHIBA dmi.chassis.version: Version 1.0 dmi.modalias: dmi:bvnTOSHIBA:bvrVersion1.60:bd11/27/2008:svnTOSHIBA:pnPORTEGER600:pvrPPR61E-00Q00CEN:rvnTOSHIBA:rnPortablePC:rvrVersionA0:cvnTOSHIBA:ct10:cvrVersion1.0: dmi.product.name: PORTEGE R600 dmi.product.version: PPR61E-00Q00CEN dmi.sys.vendor: TOSHIBA version.compiz: compiz 1:0.9.11.2+14.04.20140714-0ubuntu1 version.ia32-libs: ia32-libs N/A version.libdrm2: libdrm2 2.4.52-1 version.libgl1-mesa-dri: libgl1-mesa-dri 10.1.3-0ubuntu0.1
[Touch-packages] [Bug 1364292] Re: [Toshiba Portégé R600-10Q] VGA output doesn't work with Intel GM45 chipset
I tested with kernel 3.19 rc2 and the bug still exists. ** Changed in: xorg (Ubuntu) Status: Incomplete = Confirmed ** Tags added: kernel-bug-exists-upstream kernel-bug-exists- upstream-3.19-rc2 -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to xorg in Ubuntu. https://bugs.launchpad.net/bugs/1364292 Title: [Toshiba Portégé R600-10Q] VGA output doesn't work with Intel GM45 chipset Status in xorg package in Ubuntu: Confirmed Bug description: I have just installed Ubuntu 14.04 64-bit on my Toshiba Portege R600-10Q laptop (a model from 2009). I am now trying to display the desktop on a BenQ Senseye3 22 monitor, via the vga output, but it's not working - the monitor says No Signal Detected!. What I've done: I have gone into Screen Display, where I can see the monitor is detected by the laptop. The monitor has a 1920 x 1080 native resolution, which I have tried to use, but I have also set it to lower resolutions, e.g. 1024 x 576. I have tried to use the monitor in dual screen, mirrored and single screen mode - none work. I have tried pressing Fn + F5 to get single screen output - the laptop screen goes blank, but still no output on the monitor. I have tried several monitors (of the same type, and also of a different make), so I don't think it's that. If I plug the vga cable in after boot up, then the monitor receives no signal. WORKAROUND: If, and only if, the monitor was plugged in to the PC's VGA output during boot up, then the display outputs to the monitor correctly. The laptop has the Intel® GS45 Express chipset for graphics acceleration. I installed mesa-utils and ran glxinfo in a terminal. Amongst the output was: OpenGL renderer string: Mesa DRI Mobile Intel® GM45 Express Chipset Also, in the About This Computer window I see: Graphics: Mobile Intel® GM45 Express Chipset I wonder if the problem is that my chipset is GS45 not GM45. The output of sudo lshw -C video is: *-display:0 description: VGA compatible controller product: Mobile 4 Series Chipset Integrated Graphics Controller vendor: Intel Corporation physical id: 2 bus info: pci@:00:02.0 version: 07 width: 64 bits clock: 33MHz capabilities: msi pm vga_controller bus_master cap_list rom configuration: driver=i915 latency=0 resources: irq:44 memory:ff40-ff7f memory:e000-efff ioport:cff8(size=8) *-display:1 UNCLAIMED description: Display controller product: Mobile 4 Series Chipset Integrated Graphics Controller vendor: Intel Corporation physical id: 2.1 bus info: pci@:00:02.1 version: 07 width: 64 bits clock: 33MHz capabilities: pm bus_master cap_list configuration: latency=0 resources: memory:ffc0-ffcf ProblemType: Bug DistroRelease: Ubuntu 14.04 Package: xorg 1:7.7+1ubuntu8 ProcVersionSignature: Ubuntu 3.13.0-35.62-generic 3.13.11.6 Uname: Linux 3.13.0-35-generic x86_64 .tmp.unity.support.test.0: ApportVersion: 2.14.1-0ubuntu3.3 Architecture: amd64 CompizPlugins: No value set for `/apps/compiz-1/general/screen0/options/active_plugins' CompositorRunning: compiz CompositorUnredirectDriverBlacklist: '(nouveau|Intel).*Mesa 8.0' CompositorUnredirectFSW: true CurrentDesktop: Unity Date: Tue Sep 2 10:00:57 2014 DistUpgraded: Fresh install DistroCodename: trusty DistroVariant: ubuntu EcryptfsInUse: Yes ExtraDebuggingInterest: Yes, if not too technical GraphicsCard: Intel Corporation Mobile 4 Series Chipset Integrated Graphics Controller [8086:2a42] (rev 07) (prog-if 00 [VGA controller]) Subsystem: Toshiba America Info Systems Device [1179:000c] Subsystem: Toshiba America Info Systems Device [1179:000c] InstallationDate: Installed on 2014-08-28 (4 days ago) InstallationMedia: Ubuntu 14.04.1 LTS Trusty Tahr - Release amd64 (20140722.2) MachineType: TOSHIBA PORTEGE R600 ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.13.0-35-generic root=UUID=fe977943-4013-472e-b627-f7184c9e190f ro quiet splash vt.handoff=7 SourcePackage: xorg UpgradeStatus: No upgrade log present (probably fresh install) dmi.bios.date: 11/27/2008 dmi.bios.vendor: TOSHIBA dmi.bios.version: Version 1.60 dmi.board.asset.tag: 00 dmi.board.name: Portable PC dmi.board.vendor: TOSHIBA dmi.board.version: Version A0 dmi.chassis.asset.tag: 00 dmi.chassis.type: 10 dmi.chassis.vendor: TOSHIBA dmi.chassis.version: Version 1.0 dmi.modalias: dmi:bvnTOSHIBA:bvrVersion1.60:bd11/27/2008:svnTOSHIBA:pnPORTEGER600:pvrPPR61E-00Q00CEN:rvnTOSHIBA:rnPortablePC:rvrVersionA0:cvnTOSHIBA:ct10:cvrVersion1.0: dmi.product.name: PORTEGE R600 dmi.product.version: PPR61E-00Q00CEN dmi.sys.vendor: TOSHIBA version.compiz: compiz 1:0.9.11.2+14.04.20140714-0ubuntu1 version.ia32-libs: ia32-libs N/A version.libdrm2: libdrm2 2.4.52-1 version.libgl1-mesa-dri: libgl1-mesa-dri 10.1.3-0ubuntu0.1
[Touch-packages] [Bug 1364292] Re: [Toshiba Portégé R600-10Q] VGA output doesn't work with Intel GM45 chipset
Before I remove the mainline kernel, the output of uname -a in a terminal is: 3.19.0-031900rc2-generic #201412290135 SMP Mon Dec 29 01:36:54 UTC 2014 x86_64 x86_64 x86_64 GNU/Linux I confirmed that the vga output doesn't work when the cable is hot plugged, but does when the cable is inserted prior to booting. I.e. the behaviour is identical to previous kernels. -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to xorg in Ubuntu. https://bugs.launchpad.net/bugs/1364292 Title: [Toshiba Portégé R600-10Q] VGA output doesn't work with Intel GM45 chipset Status in xorg package in Ubuntu: Confirmed Bug description: I have just installed Ubuntu 14.04 64-bit on my Toshiba Portege R600-10Q laptop (a model from 2009). I am now trying to display the desktop on a BenQ Senseye3 22 monitor, via the vga output, but it's not working - the monitor says No Signal Detected!. What I've done: I have gone into Screen Display, where I can see the monitor is detected by the laptop. The monitor has a 1920 x 1080 native resolution, which I have tried to use, but I have also set it to lower resolutions, e.g. 1024 x 576. I have tried to use the monitor in dual screen, mirrored and single screen mode - none work. I have tried pressing Fn + F5 to get single screen output - the laptop screen goes blank, but still no output on the monitor. I have tried several monitors (of the same type, and also of a different make), so I don't think it's that. If I plug the vga cable in after boot up, then the monitor receives no signal. WORKAROUND: If, and only if, the monitor was plugged in to the PC's VGA output during boot up, then the display outputs to the monitor correctly. The laptop has the Intel® GS45 Express chipset for graphics acceleration. I installed mesa-utils and ran glxinfo in a terminal. Amongst the output was: OpenGL renderer string: Mesa DRI Mobile Intel® GM45 Express Chipset Also, in the About This Computer window I see: Graphics: Mobile Intel® GM45 Express Chipset I wonder if the problem is that my chipset is GS45 not GM45. The output of sudo lshw -C video is: *-display:0 description: VGA compatible controller product: Mobile 4 Series Chipset Integrated Graphics Controller vendor: Intel Corporation physical id: 2 bus info: pci@:00:02.0 version: 07 width: 64 bits clock: 33MHz capabilities: msi pm vga_controller bus_master cap_list rom configuration: driver=i915 latency=0 resources: irq:44 memory:ff40-ff7f memory:e000-efff ioport:cff8(size=8) *-display:1 UNCLAIMED description: Display controller product: Mobile 4 Series Chipset Integrated Graphics Controller vendor: Intel Corporation physical id: 2.1 bus info: pci@:00:02.1 version: 07 width: 64 bits clock: 33MHz capabilities: pm bus_master cap_list configuration: latency=0 resources: memory:ffc0-ffcf ProblemType: Bug DistroRelease: Ubuntu 14.04 Package: xorg 1:7.7+1ubuntu8 ProcVersionSignature: Ubuntu 3.13.0-35.62-generic 3.13.11.6 Uname: Linux 3.13.0-35-generic x86_64 .tmp.unity.support.test.0: ApportVersion: 2.14.1-0ubuntu3.3 Architecture: amd64 CompizPlugins: No value set for `/apps/compiz-1/general/screen0/options/active_plugins' CompositorRunning: compiz CompositorUnredirectDriverBlacklist: '(nouveau|Intel).*Mesa 8.0' CompositorUnredirectFSW: true CurrentDesktop: Unity Date: Tue Sep 2 10:00:57 2014 DistUpgraded: Fresh install DistroCodename: trusty DistroVariant: ubuntu EcryptfsInUse: Yes ExtraDebuggingInterest: Yes, if not too technical GraphicsCard: Intel Corporation Mobile 4 Series Chipset Integrated Graphics Controller [8086:2a42] (rev 07) (prog-if 00 [VGA controller]) Subsystem: Toshiba America Info Systems Device [1179:000c] Subsystem: Toshiba America Info Systems Device [1179:000c] InstallationDate: Installed on 2014-08-28 (4 days ago) InstallationMedia: Ubuntu 14.04.1 LTS Trusty Tahr - Release amd64 (20140722.2) MachineType: TOSHIBA PORTEGE R600 ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.13.0-35-generic root=UUID=fe977943-4013-472e-b627-f7184c9e190f ro quiet splash vt.handoff=7 SourcePackage: xorg UpgradeStatus: No upgrade log present (probably fresh install) dmi.bios.date: 11/27/2008 dmi.bios.vendor: TOSHIBA dmi.bios.version: Version 1.60 dmi.board.asset.tag: 00 dmi.board.name: Portable PC dmi.board.vendor: TOSHIBA dmi.board.version: Version A0 dmi.chassis.asset.tag: 00 dmi.chassis.type: 10 dmi.chassis.vendor: TOSHIBA dmi.chassis.version: Version 1.0 dmi.modalias: dmi:bvnTOSHIBA:bvrVersion1.60:bd11/27/2008:svnTOSHIBA:pnPORTEGER600:pvrPPR61E-00Q00CEN:rvnTOSHIBA:rnPortablePC:rvrVersionA0:cvnTOSHIBA:ct10:cvrVersion1.0: dmi.product.name: PORTEGE R600 dmi.product.version: PPR61E-00Q00CEN dmi.sys.vendor: TOSHIBA version.compiz: compiz
[Touch-packages] [Bug 1364292] Re: [Toshiba Portégé R600-10Q] VGA output doesn't work with Intel GM45 chipset
I tried the release you asked me to (12.04.0) and it exhibits the same problem. The VGA output works fine when the monitor is plugged in at boot up, but not if plugged in after booting. By the way, I didn't state this before, but the VGA output worked fine under Windows, even when plugged in after booting. -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to xorg in Ubuntu. https://bugs.launchpad.net/bugs/1364292 Title: [Toshiba Portégé R600-10Q] VGA output doesn't work with Intel GM45 chipset Status in xorg package in Ubuntu: Incomplete Bug description: I have just installed Ubuntu 14.04 64-bit on my Toshiba Portege R600-10Q laptop (a model from 2009). I am now trying to display the desktop on a BenQ Senseye3 22 monitor, via the vga output, but it's not working - the monitor says No Signal Detected!. What I've done: I have gone into Screen Display, where I can see the monitor is detected by the laptop. The monitor has a 1920 x 1080 native resolution, which I have tried to use, but I have also set it to lower resolutions, e.g. 1024 x 576. I have tried to use the monitor in dual screen, mirrored and single screen mode - none work. I have tried pressing Fn + F5 to get single screen output - the laptop screen goes blank, but still no output on the monitor. I have tried several monitors (of the same type, and also of a different make), so I don't think it's that. If I plug the vga cable in after boot up, then the monitor receives no signal. WORKAROUND: If, and only if, the monitor was plugged in to the PC's VGA output during boot up, then the display outputs to the monitor correctly. The laptop has the Intel® GS45 Express chipset for graphics acceleration. I installed mesa-utils and ran glxinfo in a terminal. Amongst the output was: OpenGL renderer string: Mesa DRI Mobile Intel® GM45 Express Chipset Also, in the About This Computer window I see: Graphics: Mobile Intel® GM45 Express Chipset I wonder if the problem is that my chipset is GS45 not GM45. The output of sudo lshw -C video is: *-display:0 description: VGA compatible controller product: Mobile 4 Series Chipset Integrated Graphics Controller vendor: Intel Corporation physical id: 2 bus info: pci@:00:02.0 version: 07 width: 64 bits clock: 33MHz capabilities: msi pm vga_controller bus_master cap_list rom configuration: driver=i915 latency=0 resources: irq:44 memory:ff40-ff7f memory:e000-efff ioport:cff8(size=8) *-display:1 UNCLAIMED description: Display controller product: Mobile 4 Series Chipset Integrated Graphics Controller vendor: Intel Corporation physical id: 2.1 bus info: pci@:00:02.1 version: 07 width: 64 bits clock: 33MHz capabilities: pm bus_master cap_list configuration: latency=0 resources: memory:ffc0-ffcf ProblemType: Bug DistroRelease: Ubuntu 14.04 Package: xorg 1:7.7+1ubuntu8 ProcVersionSignature: Ubuntu 3.13.0-35.62-generic 3.13.11.6 Uname: Linux 3.13.0-35-generic x86_64 .tmp.unity.support.test.0: ApportVersion: 2.14.1-0ubuntu3.3 Architecture: amd64 CompizPlugins: No value set for `/apps/compiz-1/general/screen0/options/active_plugins' CompositorRunning: compiz CompositorUnredirectDriverBlacklist: '(nouveau|Intel).*Mesa 8.0' CompositorUnredirectFSW: true CurrentDesktop: Unity Date: Tue Sep 2 10:00:57 2014 DistUpgraded: Fresh install DistroCodename: trusty DistroVariant: ubuntu EcryptfsInUse: Yes ExtraDebuggingInterest: Yes, if not too technical GraphicsCard: Intel Corporation Mobile 4 Series Chipset Integrated Graphics Controller [8086:2a42] (rev 07) (prog-if 00 [VGA controller]) Subsystem: Toshiba America Info Systems Device [1179:000c] Subsystem: Toshiba America Info Systems Device [1179:000c] InstallationDate: Installed on 2014-08-28 (4 days ago) InstallationMedia: Ubuntu 14.04.1 LTS Trusty Tahr - Release amd64 (20140722.2) MachineType: TOSHIBA PORTEGE R600 ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.13.0-35-generic root=UUID=fe977943-4013-472e-b627-f7184c9e190f ro quiet splash vt.handoff=7 SourcePackage: xorg UpgradeStatus: No upgrade log present (probably fresh install) dmi.bios.date: 11/27/2008 dmi.bios.vendor: TOSHIBA dmi.bios.version: Version 1.60 dmi.board.asset.tag: 00 dmi.board.name: Portable PC dmi.board.vendor: TOSHIBA dmi.board.version: Version A0 dmi.chassis.asset.tag: 00 dmi.chassis.type: 10 dmi.chassis.vendor: TOSHIBA dmi.chassis.version: Version 1.0 dmi.modalias: dmi:bvnTOSHIBA:bvrVersion1.60:bd11/27/2008:svnTOSHIBA:pnPORTEGER600:pvrPPR61E-00Q00CEN:rvnTOSHIBA:rnPortablePC:rvrVersionA0:cvnTOSHIBA:ct10:cvrVersion1.0: dmi.product.name: PORTEGE R600 dmi.product.version: PPR61E-00Q00CEN dmi.sys.vendor: TOSHIBA version.compiz: compiz 1:0.9.11.2+14.04.20140714-0ubuntu1 version.ia32-libs:
[Touch-packages] [Bug 1364292] Re: [Toshiba Portégé R600-10Q] VGA output doesn't work with Intel GM45 chipset
I did not test it on a release prior to 14.04. However, the following resources suggest this bug has existed since at least release 10.04: http://askubuntu.com/questions/121228/laptop-with-intel-graphics-external-vga-monitor-only-gets-signal-on-boot-no-h https://bugs.launchpad.net/ubuntu/+source/xserver-xorg-video-intel/+bug/1218224 -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to xorg in Ubuntu. https://bugs.launchpad.net/bugs/1364292 Title: [Toshiba Portégé R600-10Q] VGA output doesn't work with Intel GM45 chipset Status in “xorg” package in Ubuntu: Incomplete Bug description: I have just installed Ubuntu 14.04 64-bit on my Toshiba Portege R600-10Q laptop (a model from 2009). I am now trying to display the desktop on a BenQ Senseye3 22 monitor, via the vga output, but it's not working - the monitor says No Signal Detected!. What I've done: I have gone into Screen Display, where I can see the monitor is detected by the laptop. The monitor has a 1920 x 1080 native resolution, which I have tried to use, but I have also set it to lower resolutions, e.g. 1024 x 576. I have tried to use the monitor in dual screen, mirrored and single screen mode - none work. I have tried pressing Fn + F5 to get single screen output - the laptop screen goes blank, but still no output on the monitor. I have tried several monitors (of the same type, and also of a different make), so I don't think it's that. If I plug the vga cable in after boot up, then the monitor receives no signal. WORKAROUND: If, and only if, the monitor was plugged in to the PC's VGA output during boot up, then the display outputs to the monitor correctly. The laptop has the Intel® GS45 Express chipset for graphics acceleration. I installed mesa-utils and ran glxinfo in a terminal. Amongst the output was: OpenGL renderer string: Mesa DRI Mobile Intel® GM45 Express Chipset Also, in the About This Computer window I see: Graphics: Mobile Intel® GM45 Express Chipset I wonder if the problem is that my chipset is GS45 not GM45. The output of sudo lshw -C video is: *-display:0 description: VGA compatible controller product: Mobile 4 Series Chipset Integrated Graphics Controller vendor: Intel Corporation physical id: 2 bus info: pci@:00:02.0 version: 07 width: 64 bits clock: 33MHz capabilities: msi pm vga_controller bus_master cap_list rom configuration: driver=i915 latency=0 resources: irq:44 memory:ff40-ff7f memory:e000-efff ioport:cff8(size=8) *-display:1 UNCLAIMED description: Display controller product: Mobile 4 Series Chipset Integrated Graphics Controller vendor: Intel Corporation physical id: 2.1 bus info: pci@:00:02.1 version: 07 width: 64 bits clock: 33MHz capabilities: pm bus_master cap_list configuration: latency=0 resources: memory:ffc0-ffcf ProblemType: Bug DistroRelease: Ubuntu 14.04 Package: xorg 1:7.7+1ubuntu8 ProcVersionSignature: Ubuntu 3.13.0-35.62-generic 3.13.11.6 Uname: Linux 3.13.0-35-generic x86_64 .tmp.unity.support.test.0: ApportVersion: 2.14.1-0ubuntu3.3 Architecture: amd64 CompizPlugins: No value set for `/apps/compiz-1/general/screen0/options/active_plugins' CompositorRunning: compiz CompositorUnredirectDriverBlacklist: '(nouveau|Intel).*Mesa 8.0' CompositorUnredirectFSW: true CurrentDesktop: Unity Date: Tue Sep 2 10:00:57 2014 DistUpgraded: Fresh install DistroCodename: trusty DistroVariant: ubuntu EcryptfsInUse: Yes ExtraDebuggingInterest: Yes, if not too technical GraphicsCard: Intel Corporation Mobile 4 Series Chipset Integrated Graphics Controller [8086:2a42] (rev 07) (prog-if 00 [VGA controller]) Subsystem: Toshiba America Info Systems Device [1179:000c] Subsystem: Toshiba America Info Systems Device [1179:000c] InstallationDate: Installed on 2014-08-28 (4 days ago) InstallationMedia: Ubuntu 14.04.1 LTS Trusty Tahr - Release amd64 (20140722.2) MachineType: TOSHIBA PORTEGE R600 ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.13.0-35-generic root=UUID=fe977943-4013-472e-b627-f7184c9e190f ro quiet splash vt.handoff=7 SourcePackage: xorg UpgradeStatus: No upgrade log present (probably fresh install) dmi.bios.date: 11/27/2008 dmi.bios.vendor: TOSHIBA dmi.bios.version: Version 1.60 dmi.board.asset.tag: 00 dmi.board.name: Portable PC dmi.board.vendor: TOSHIBA dmi.board.version: Version A0 dmi.chassis.asset.tag: 00 dmi.chassis.type: 10 dmi.chassis.vendor: TOSHIBA dmi.chassis.version: Version 1.0 dmi.modalias: dmi:bvnTOSHIBA:bvrVersion1.60:bd11/27/2008:svnTOSHIBA:pnPORTEGER600:pvrPPR61E-00Q00CEN:rvnTOSHIBA:rnPortablePC:rvrVersionA0:cvnTOSHIBA:ct10:cvrVersion1.0: dmi.product.name: PORTEGE R600 dmi.product.version: PPR61E-00Q00CEN dmi.sys.vendor: TOSHIBA version.compiz: compiz
[Touch-packages] [Bug 1364292] Re: [Toshiba Portégé R600-10Q] VGA output doesn't work with Intel GM45 chipset
No, nothing changed. The bug still exists. Was there any reason to believe that it wouldn't? Closing bugs on which there has been no comment for 60 days is absurd. It's the equivalent of brushing dirt under the rug. But I don't want to check the latest image every 60 days on the off chance something has changed, when nobody is trying to fix this - that's a complete waste of my time. So there's a problem with the bug tracking system here. -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to xorg in Ubuntu. https://bugs.launchpad.net/bugs/1364292 Title: [Toshiba Portégé R600-10Q] VGA output doesn't work with Intel GM45 chipset Status in “xorg” package in Ubuntu: Incomplete Bug description: I have just installed Ubuntu 14.04 64-bit on my Toshiba Portege R600-10Q laptop (a model from 2009). I am now trying to display the desktop on a BenQ Senseye3 22 monitor, via the vga output, but it's not working - the monitor says No Signal Detected!. What I've done: I have gone into Screen Display, where I can see the monitor is detected by the laptop. The monitor has a 1920 x 1080 native resolution, which I have tried to use, but I have also set it to lower resolutions, e.g. 1024 x 576. I have tried to use the monitor in dual screen, mirrored and single screen mode - none work. I have tried pressing Fn + F5 to get single screen output - the laptop screen goes blank, but still no output on the monitor. I have tried several monitors (of the same type, and also of a different make), so I don't think it's that. If I plug the vga cable in after boot up, then the monitor receives no signal. WORKAROUND: If, and only if, the monitor was plugged in to the PC's VGA output during boot up, then the display outputs to the monitor correctly. The laptop has the Intel® GS45 Express chipset for graphics acceleration. I installed mesa-utils and ran glxinfo in a terminal. Amongst the output was: OpenGL renderer string: Mesa DRI Mobile Intel® GM45 Express Chipset Also, in the About This Computer window I see: Graphics: Mobile Intel® GM45 Express Chipset I wonder if the problem is that my chipset is GS45 not GM45. The output of sudo lshw -C video is: *-display:0 description: VGA compatible controller product: Mobile 4 Series Chipset Integrated Graphics Controller vendor: Intel Corporation physical id: 2 bus info: pci@:00:02.0 version: 07 width: 64 bits clock: 33MHz capabilities: msi pm vga_controller bus_master cap_list rom configuration: driver=i915 latency=0 resources: irq:44 memory:ff40-ff7f memory:e000-efff ioport:cff8(size=8) *-display:1 UNCLAIMED description: Display controller product: Mobile 4 Series Chipset Integrated Graphics Controller vendor: Intel Corporation physical id: 2.1 bus info: pci@:00:02.1 version: 07 width: 64 bits clock: 33MHz capabilities: pm bus_master cap_list configuration: latency=0 resources: memory:ffc0-ffcf ProblemType: Bug DistroRelease: Ubuntu 14.04 Package: xorg 1:7.7+1ubuntu8 ProcVersionSignature: Ubuntu 3.13.0-35.62-generic 3.13.11.6 Uname: Linux 3.13.0-35-generic x86_64 .tmp.unity.support.test.0: ApportVersion: 2.14.1-0ubuntu3.3 Architecture: amd64 CompizPlugins: No value set for `/apps/compiz-1/general/screen0/options/active_plugins' CompositorRunning: compiz CompositorUnredirectDriverBlacklist: '(nouveau|Intel).*Mesa 8.0' CompositorUnredirectFSW: true CurrentDesktop: Unity Date: Tue Sep 2 10:00:57 2014 DistUpgraded: Fresh install DistroCodename: trusty DistroVariant: ubuntu EcryptfsInUse: Yes ExtraDebuggingInterest: Yes, if not too technical GraphicsCard: Intel Corporation Mobile 4 Series Chipset Integrated Graphics Controller [8086:2a42] (rev 07) (prog-if 00 [VGA controller]) Subsystem: Toshiba America Info Systems Device [1179:000c] Subsystem: Toshiba America Info Systems Device [1179:000c] InstallationDate: Installed on 2014-08-28 (4 days ago) InstallationMedia: Ubuntu 14.04.1 LTS Trusty Tahr - Release amd64 (20140722.2) MachineType: TOSHIBA PORTEGE R600 ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.13.0-35-generic root=UUID=fe977943-4013-472e-b627-f7184c9e190f ro quiet splash vt.handoff=7 SourcePackage: xorg UpgradeStatus: No upgrade log present (probably fresh install) dmi.bios.date: 11/27/2008 dmi.bios.vendor: TOSHIBA dmi.bios.version: Version 1.60 dmi.board.asset.tag: 00 dmi.board.name: Portable PC dmi.board.vendor: TOSHIBA dmi.board.version: Version A0 dmi.chassis.asset.tag: 00 dmi.chassis.type: 10 dmi.chassis.vendor: TOSHIBA dmi.chassis.version: Version 1.0 dmi.modalias: dmi:bvnTOSHIBA:bvrVersion1.60:bd11/27/2008:svnTOSHIBA:pnPORTEGER600:pvrPPR61E-00Q00CEN:rvnTOSHIBA:rnPortablePC:rvrVersionA0:cvnTOSHIBA:ct10:cvrVersion1.0: dmi.product.name: PORTEGE R600
[Touch-packages] [Bug 1364292] Re: [Toshiba Portégé R600-10Q] VGA output doesn't work with Intel GM45 chipset
Why has this expired? It's still a bug, and it's still outstanding. ** Changed in: xorg (Ubuntu) Status: Expired = Opinion -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to xorg in Ubuntu. https://bugs.launchpad.net/bugs/1364292 Title: [Toshiba Portégé R600-10Q] VGA output doesn't work with Intel GM45 chipset Status in “xorg” package in Ubuntu: Opinion Bug description: I have just installed Ubuntu 14.04 64-bit on my Toshiba Portege R600-10Q laptop (a model from 2009). I am now trying to display the desktop on a BenQ Senseye3 22 monitor, via the vga output, but it's not working - the monitor says No Signal Detected!. What I've done: I have gone into Screen Display, where I can see the monitor is detected by the laptop. The monitor has a 1920 x 1080 native resolution, which I have tried to use, but I have also set it to lower resolutions, e.g. 1024 x 576. I have tried to use the monitor in dual screen, mirrored and single screen mode - none work. I have tried pressing Fn + F5 to get single screen output - the laptop screen goes blank, but still no output on the monitor. I have tried several monitors (of the same type, and also of a different make), so I don't think it's that. If I plug the vga cable in after boot up, then the monitor receives no signal. WORKAROUND: If, and only if, the monitor was plugged in to the PC's VGA output during boot up, then the display outputs to the monitor correctly. The laptop has the Intel® GS45 Express chipset for graphics acceleration. I installed mesa-utils and ran glxinfo in a terminal. Amongst the output was: OpenGL renderer string: Mesa DRI Mobile Intel® GM45 Express Chipset Also, in the About This Computer window I see: Graphics: Mobile Intel® GM45 Express Chipset I wonder if the problem is that my chipset is GS45 not GM45. The output of sudo lshw -C video is: *-display:0 description: VGA compatible controller product: Mobile 4 Series Chipset Integrated Graphics Controller vendor: Intel Corporation physical id: 2 bus info: pci@:00:02.0 version: 07 width: 64 bits clock: 33MHz capabilities: msi pm vga_controller bus_master cap_list rom configuration: driver=i915 latency=0 resources: irq:44 memory:ff40-ff7f memory:e000-efff ioport:cff8(size=8) *-display:1 UNCLAIMED description: Display controller product: Mobile 4 Series Chipset Integrated Graphics Controller vendor: Intel Corporation physical id: 2.1 bus info: pci@:00:02.1 version: 07 width: 64 bits clock: 33MHz capabilities: pm bus_master cap_list configuration: latency=0 resources: memory:ffc0-ffcf ProblemType: Bug DistroRelease: Ubuntu 14.04 Package: xorg 1:7.7+1ubuntu8 ProcVersionSignature: Ubuntu 3.13.0-35.62-generic 3.13.11.6 Uname: Linux 3.13.0-35-generic x86_64 .tmp.unity.support.test.0: ApportVersion: 2.14.1-0ubuntu3.3 Architecture: amd64 CompizPlugins: No value set for `/apps/compiz-1/general/screen0/options/active_plugins' CompositorRunning: compiz CompositorUnredirectDriverBlacklist: '(nouveau|Intel).*Mesa 8.0' CompositorUnredirectFSW: true CurrentDesktop: Unity Date: Tue Sep 2 10:00:57 2014 DistUpgraded: Fresh install DistroCodename: trusty DistroVariant: ubuntu EcryptfsInUse: Yes ExtraDebuggingInterest: Yes, if not too technical GraphicsCard: Intel Corporation Mobile 4 Series Chipset Integrated Graphics Controller [8086:2a42] (rev 07) (prog-if 00 [VGA controller]) Subsystem: Toshiba America Info Systems Device [1179:000c] Subsystem: Toshiba America Info Systems Device [1179:000c] InstallationDate: Installed on 2014-08-28 (4 days ago) InstallationMedia: Ubuntu 14.04.1 LTS Trusty Tahr - Release amd64 (20140722.2) MachineType: TOSHIBA PORTEGE R600 ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.13.0-35-generic root=UUID=fe977943-4013-472e-b627-f7184c9e190f ro quiet splash vt.handoff=7 SourcePackage: xorg UpgradeStatus: No upgrade log present (probably fresh install) dmi.bios.date: 11/27/2008 dmi.bios.vendor: TOSHIBA dmi.bios.version: Version 1.60 dmi.board.asset.tag: 00 dmi.board.name: Portable PC dmi.board.vendor: TOSHIBA dmi.board.version: Version A0 dmi.chassis.asset.tag: 00 dmi.chassis.type: 10 dmi.chassis.vendor: TOSHIBA dmi.chassis.version: Version 1.0 dmi.modalias: dmi:bvnTOSHIBA:bvrVersion1.60:bd11/27/2008:svnTOSHIBA:pnPORTEGER600:pvrPPR61E-00Q00CEN:rvnTOSHIBA:rnPortablePC:rvrVersionA0:cvnTOSHIBA:ct10:cvrVersion1.0: dmi.product.name: PORTEGE R600 dmi.product.version: PPR61E-00Q00CEN dmi.sys.vendor: TOSHIBA version.compiz: compiz 1:0.9.11.2+14.04.20140714-0ubuntu1 version.ia32-libs: ia32-libs N/A version.libdrm2: libdrm2 2.4.52-1 version.libgl1-mesa-dri: libgl1-mesa-dri 10.1.3-0ubuntu0.1 version.libgl1-mesa-dri-experimental: libgl1-mesa-dri-experimental N/A
[Touch-packages] [Bug 1364292] [NEW] VGA output doesn't work with Intel GM45 chipset
Public bug reported: I have just installed Ubuntu 14.04 64-bit on my Toshiba Portege R600-10Q laptop (a model from 2009). I am now trying to display the desktop on a BenQ Senseye3 22 monitor, via the vga output, but it's not working - the monitor says No Signal Detected!. What I've done: I have gone into Screen Display, where I can see the monitor is detected by the laptop. The monitor has a 1920 x 1080 native resolution, which I have tried to use, but I have also set it to lower resolutions, e.g. 1024 x 576. I have tried to use the monitor in dual screen, mirrored and single screen mode - none work. I have tried pressing Fn + F5 to get single screen output - the laptop screen goes blank, but still no output on the monitor. I have tried several monitors (of the same type, and also of a different make), so I don't think it's that. If, and only if, the monitor was plugged in to the PC's vga output during boot up, then the display outputs to the monitor correctly. But if I plug the vga cable in after boot up, then the monitor receives no signal. The laptop has the Intel® GS45 Express chipset for graphics acceleration. I installed mesa-utils and ran glxinfo in a terminal. Amongst the output was: OpenGL renderer string: Mesa DRI Mobile Intel® GM45 Express Chipset Also, in the About This Computer window I see: Graphics: Mobile Intel® GM45 Express Chipset I wonder if the problem is that my chipset is GS45 not GM45. One last thing. The output of sudo lshw -C video is: *-display:0 description: VGA compatible controller product: Mobile 4 Series Chipset Integrated Graphics Controller vendor: Intel Corporation physical id: 2 bus info: pci@:00:02.0 version: 07 width: 64 bits clock: 33MHz capabilities: msi pm vga_controller bus_master cap_list rom configuration: driver=i915 latency=0 resources: irq:44 memory:ff40-ff7f memory:e000-efff ioport:cff8(size=8) *-display:1 UNCLAIMED description: Display controller product: Mobile 4 Series Chipset Integrated Graphics Controller vendor: Intel Corporation physical id: 2.1 bus info: pci@:00:02.1 version: 07 width: 64 bits clock: 33MHz capabilities: pm bus_master cap_list configuration: latency=0 resources: memory:ffc0-ffcf ProblemType: Bug DistroRelease: Ubuntu 14.04 Package: xorg 1:7.7+1ubuntu8 ProcVersionSignature: Ubuntu 3.13.0-35.62-generic 3.13.11.6 Uname: Linux 3.13.0-35-generic x86_64 .tmp.unity.support.test.0: ApportVersion: 2.14.1-0ubuntu3.3 Architecture: amd64 CompizPlugins: No value set for `/apps/compiz-1/general/screen0/options/active_plugins' CompositorRunning: compiz CompositorUnredirectDriverBlacklist: '(nouveau|Intel).*Mesa 8.0' CompositorUnredirectFSW: true CurrentDesktop: Unity Date: Tue Sep 2 10:00:57 2014 DistUpgraded: Fresh install DistroCodename: trusty DistroVariant: ubuntu EcryptfsInUse: Yes ExtraDebuggingInterest: Yes, if not too technical GraphicsCard: Intel Corporation Mobile 4 Series Chipset Integrated Graphics Controller [8086:2a42] (rev 07) (prog-if 00 [VGA controller]) Subsystem: Toshiba America Info Systems Device [1179:000c] Subsystem: Toshiba America Info Systems Device [1179:000c] InstallationDate: Installed on 2014-08-28 (4 days ago) InstallationMedia: Ubuntu 14.04.1 LTS Trusty Tahr - Release amd64 (20140722.2) MachineType: TOSHIBA PORTEGE R600 ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.13.0-35-generic root=UUID=fe977943-4013-472e-b627-f7184c9e190f ro quiet splash vt.handoff=7 SourcePackage: xorg UpgradeStatus: No upgrade log present (probably fresh install) dmi.bios.date: 11/27/2008 dmi.bios.vendor: TOSHIBA dmi.bios.version: Version 1.60 dmi.board.asset.tag: 00 dmi.board.name: Portable PC dmi.board.vendor: TOSHIBA dmi.board.version: Version A0 dmi.chassis.asset.tag: 00 dmi.chassis.type: 10 dmi.chassis.vendor: TOSHIBA dmi.chassis.version: Version 1.0 dmi.modalias: dmi:bvnTOSHIBA:bvrVersion1.60:bd11/27/2008:svnTOSHIBA:pnPORTEGER600:pvrPPR61E-00Q00CEN:rvnTOSHIBA:rnPortablePC:rvrVersionA0:cvnTOSHIBA:ct10:cvrVersion1.0: dmi.product.name: PORTEGE R600 dmi.product.version: PPR61E-00Q00CEN dmi.sys.vendor: TOSHIBA version.compiz: compiz 1:0.9.11.2+14.04.20140714-0ubuntu1 version.ia32-libs: ia32-libs N/A version.libdrm2: libdrm2 2.4.52-1 version.libgl1-mesa-dri: libgl1-mesa-dri 10.1.3-0ubuntu0.1 version.libgl1-mesa-dri-experimental: libgl1-mesa-dri-experimental N/A version.libgl1-mesa-glx: libgl1-mesa-glx 10.1.3-0ubuntu0.1 version.xserver-xorg-core: xserver-xorg-core 2:1.15.1-0ubuntu2 version.xserver-xorg-input-evdev: xserver-xorg-input-evdev 1:2.8.2-1ubuntu2 version.xserver-xorg-video-ati: xserver-xorg-video-ati 1:7.3.0-1ubuntu3.1 version.xserver-xorg-video-intel: xserver-xorg-video-intel 2:2.99.910-0ubuntu1 version.xserver-xorg-video-nouveau: xserver-xorg-video-nouveau 1:1.0.10-1ubuntu2 xserver.bootTime: Sun Aug 31 11:29:04 2014 xserver.configfile: default xserver.errors: xserver.logfile: /var/log/Xorg.0.log xserver.outputs: xserver.version: 2:1.15.1-0ubuntu2 **
