[Touch-packages] [Bug 1851518] Re: [950SBE/951SBE, Realtek ALC298, Speaker, Internal] No sound on internal speakers, very very quiet on headphones
** Package changed: alsa-driver (Ubuntu) => linux (Ubuntu) -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to alsa-driver in Ubuntu. https://bugs.launchpad.net/bugs/1851518 Title: [950SBE/951SBE, Realtek ALC298, Speaker, Internal] No sound on internal speakers, very very quiet on headphones Status in linux package in Ubuntu: Confirmed Bug description: I've been googling this issue for 10's of hours and tried many things. Relase of Ubuntu: 19.10 Expected outcome: Music plays on the internal speakers and headphones. Actual outcome: I can barely hear audio using headphones with volume turned up to 150%. Absolutely nothing comes out of the speakers. (The speakers sound great under Windows 10.) Complete alsa-info output is attached, but here are some snippets: !!DMI Information !!--- Manufacturer: SAMSUNG ELECTRONICS CO., LTD. Product Name: 950SBE/951SBE Product Version: P06RES Firmware Version: P06RES.075.190529.SP Board Vendor: SAMSUNG ELECTRONICS CO., LTD. Board Name:NP950SBE-K01US !!Kernel Information !!-- Kernel release:5.3.0-19-generic Operating System: GNU/Linux Architecture: x86_64 Processor: x86_64 SMP Enabled: Yes !!ALSA Version !! Driver version: k5.3.0-19-generic Library version:1.1.9 Utilities version: 1.1.9 !!Loaded ALSA modules !!--- snd_hda_intel !!Sound Servers on this system !! Pulseaudio: Installed - Yes (/usr/bin/pulseaudio) Running - Yes !!Soundcards recognised by ALSA !!- 0 [PCH]: HDA-Intel - HDA Intel PCH HDA Intel PCH at 0x604b118000 irq 177 !!PCI Soundcards installed in the system !!-- 00:1f.3 Multimedia audio controller: Intel Corporation Cannon Point-LP High Definition Audio Controller (rev 11) !!Advanced information - PCI Vendor/Device/Subsystem ID's !!--- 00:1f.3 0401: 8086:9dc8 (rev 11) DeviceName: Onboard - Sound !!HDA-Intel Codec information !!--- --startcollapse-- Codec: Realtek ALC298 Address: 0 AFG Function Id: 0x1 (unsol 1) Vendor Id: 0x10ec0298 Subsystem Id: 0x144dc812 Revision Id: 0x100103 No Modem Function Group found Default PCM: rates [0x60]: 44100 48000 bits [0xe]: 16 20 24 formats [0x1]: PCM Default Amp-In caps: N/A Default Amp-Out caps: N/A State of AFG node 0x01: Power states: D0 D1 D2 D3 D3cold CLKSTOP EPSS Power: setting=D0, actual=D0 GPIO: io=8, o=0, i=0, unsolicited=1, wake=0 IO[0]: enable=0, dir=0, wake=0, sticky=0, data=0, unsol=0 IO[1]: enable=0, dir=0, wake=0, sticky=0, data=0, unsol=0 IO[2]: enable=0, dir=0, wake=0, sticky=0, data=0, unsol=0 IO[3]: enable=0, dir=0, wake=0, sticky=0, data=0, unsol=0 IO[4]: enable=0, dir=0, wake=0, sticky=0, data=0, unsol=0 IO[5]: enable=0, dir=0, wake=0, sticky=0, data=0, unsol=0 IO[6]: enable=0, dir=0, wake=0, sticky=0, data=0, unsol=0 IO[7]: enable=0, dir=0, wake=0, sticky=0, data=0, unsol=0 Node 0x02 [Audio Output] wcaps 0x41d: Stereo Amp-Out Control: name="Headphone Playback Volume", index=0, device=0 ControlAmp: chs=3, dir=Out, idx=0, ofs=0 Device: name="ALC298 Analog", type="Audio", device=0 Amp-Out caps: ofs=0x7f, nsteps=0x7f, stepsize=0x01, mute=0 Amp-Out vals: [0x00 0x00] Converter: stream=1, channel=0 PCM: rates [0x60]: 44100 48000 bits [0xe]: 16 20 24 formats [0x1]: PCM Power states: D0 D1 D2 D3 EPSS Power: setting=D0, actual=D0 Node 0x03 [Audio Output] wcaps 0x41d: Stereo Amp-Out Control: name="Speaker Playback Volume", index=0, device=0 ControlAmp: chs=3, dir=Out, idx=0, ofs=0 Amp-Out caps: ofs=0x7f, nsteps=0x7f, stepsize=0x01, mute=0 Amp-Out vals: [0x7f 0x7f] Converter: stream=1, channel=0 ProblemType: Bug DistroRelease: Ubuntu 19.10 Package: alsa-base 1.0.25+dfsg-0ubuntu5 ProcVersionSignature: Ubuntu 5.3.0-19.20-generic 5.3.1 Uname: Linux 5.3.0-19-generic x86_64 ApportVersion: 2.20.11-0ubuntu8.2 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: martin 1383 F pulseaudio CurrentDesktop: ubuntu:GNOME Date: Wed Nov 6 06:20:08 2019 InstallationDate: Installed on 2019-11-03 (3 days ago) InstallationMedia: Ubuntu 19.10 "Eoan Ermine" - Release amd64 (20191017) PackageArchitecture: all ProcEnviron: TERM=xterm-256color PATH=(custom, no user) XDG_RUNTIME_DIR= LANG=en_US.UTF-8 SHELL=/bin/bash SourcePackage: alsa-driver Symptom: audio Symptom_AlsaPlaybackTest: ALSA playback test through plughw:PCH failed
[Touch-packages] [Bug 1851518] Re: [950SBE/951SBE, Realtek ALC298, Speaker, Internal] No sound on internal speakers, very very quiet on headphones
Quite some investigations you did there ironincoder, don't forget to post here if you manage to get the speakers going. ;) I was actually wondering where the correct place to post and get codec issues fixed is, because this probably isn't the place? Is there a bug tracker for Alsa? -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to alsa-driver in Ubuntu. https://bugs.launchpad.net/bugs/1851518 Title: [950SBE/951SBE, Realtek ALC298, Speaker, Internal] No sound on internal speakers, very very quiet on headphones Status in alsa-driver package in Ubuntu: Confirmed Bug description: I've been googling this issue for 10's of hours and tried many things. Relase of Ubuntu: 19.10 Expected outcome: Music plays on the internal speakers and headphones. Actual outcome: I can barely hear audio using headphones with volume turned up to 150%. Absolutely nothing comes out of the speakers. (The speakers sound great under Windows 10.) Complete alsa-info output is attached, but here are some snippets: !!DMI Information !!--- Manufacturer: SAMSUNG ELECTRONICS CO., LTD. Product Name: 950SBE/951SBE Product Version: P06RES Firmware Version: P06RES.075.190529.SP Board Vendor: SAMSUNG ELECTRONICS CO., LTD. Board Name:NP950SBE-K01US !!Kernel Information !!-- Kernel release:5.3.0-19-generic Operating System: GNU/Linux Architecture: x86_64 Processor: x86_64 SMP Enabled: Yes !!ALSA Version !! Driver version: k5.3.0-19-generic Library version:1.1.9 Utilities version: 1.1.9 !!Loaded ALSA modules !!--- snd_hda_intel !!Sound Servers on this system !! Pulseaudio: Installed - Yes (/usr/bin/pulseaudio) Running - Yes !!Soundcards recognised by ALSA !!- 0 [PCH]: HDA-Intel - HDA Intel PCH HDA Intel PCH at 0x604b118000 irq 177 !!PCI Soundcards installed in the system !!-- 00:1f.3 Multimedia audio controller: Intel Corporation Cannon Point-LP High Definition Audio Controller (rev 11) !!Advanced information - PCI Vendor/Device/Subsystem ID's !!--- 00:1f.3 0401: 8086:9dc8 (rev 11) DeviceName: Onboard - Sound !!HDA-Intel Codec information !!--- --startcollapse-- Codec: Realtek ALC298 Address: 0 AFG Function Id: 0x1 (unsol 1) Vendor Id: 0x10ec0298 Subsystem Id: 0x144dc812 Revision Id: 0x100103 No Modem Function Group found Default PCM: rates [0x60]: 44100 48000 bits [0xe]: 16 20 24 formats [0x1]: PCM Default Amp-In caps: N/A Default Amp-Out caps: N/A State of AFG node 0x01: Power states: D0 D1 D2 D3 D3cold CLKSTOP EPSS Power: setting=D0, actual=D0 GPIO: io=8, o=0, i=0, unsolicited=1, wake=0 IO[0]: enable=0, dir=0, wake=0, sticky=0, data=0, unsol=0 IO[1]: enable=0, dir=0, wake=0, sticky=0, data=0, unsol=0 IO[2]: enable=0, dir=0, wake=0, sticky=0, data=0, unsol=0 IO[3]: enable=0, dir=0, wake=0, sticky=0, data=0, unsol=0 IO[4]: enable=0, dir=0, wake=0, sticky=0, data=0, unsol=0 IO[5]: enable=0, dir=0, wake=0, sticky=0, data=0, unsol=0 IO[6]: enable=0, dir=0, wake=0, sticky=0, data=0, unsol=0 IO[7]: enable=0, dir=0, wake=0, sticky=0, data=0, unsol=0 Node 0x02 [Audio Output] wcaps 0x41d: Stereo Amp-Out Control: name="Headphone Playback Volume", index=0, device=0 ControlAmp: chs=3, dir=Out, idx=0, ofs=0 Device: name="ALC298 Analog", type="Audio", device=0 Amp-Out caps: ofs=0x7f, nsteps=0x7f, stepsize=0x01, mute=0 Amp-Out vals: [0x00 0x00] Converter: stream=1, channel=0 PCM: rates [0x60]: 44100 48000 bits [0xe]: 16 20 24 formats [0x1]: PCM Power states: D0 D1 D2 D3 EPSS Power: setting=D0, actual=D0 Node 0x03 [Audio Output] wcaps 0x41d: Stereo Amp-Out Control: name="Speaker Playback Volume", index=0, device=0 ControlAmp: chs=3, dir=Out, idx=0, ofs=0 Amp-Out caps: ofs=0x7f, nsteps=0x7f, stepsize=0x01, mute=0 Amp-Out vals: [0x7f 0x7f] Converter: stream=1, channel=0 ProblemType: Bug DistroRelease: Ubuntu 19.10 Package: alsa-base 1.0.25+dfsg-0ubuntu5 ProcVersionSignature: Ubuntu 5.3.0-19.20-generic 5.3.1 Uname: Linux 5.3.0-19-generic x86_64 ApportVersion: 2.20.11-0ubuntu8.2 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: martin 1383 F pulseaudio CurrentDesktop: ubuntu:GNOME Date: Wed Nov 6 06:20:08 2019 InstallationDate: Installed on 2019-11-03 (3 days ago) InstallationMedia: Ubuntu 19.10 "Eoan Ermine" - Release amd64 (20191017) PackageArchitecture: all ProcEnvir
[Touch-packages] [Bug 1851518] Re: [950SBE/951SBE, Realtek ALC298, Speaker, Internal] No sound on internal speakers, very very quiet on headphones
ironincoder and I reported a kernel bug, https://bugzilla.kernel.org/show_bug.cgi?id=207423 ** Bug watch added: Linux Kernel Bug Tracker #207423 https://bugzilla.kernel.org/show_bug.cgi?id=207423 -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to alsa-driver in Ubuntu. https://bugs.launchpad.net/bugs/1851518 Title: [950SBE/951SBE, Realtek ALC298, Speaker, Internal] No sound on internal speakers, very very quiet on headphones Status in alsa-driver package in Ubuntu: Confirmed Bug description: I've been googling this issue for 10's of hours and tried many things. Relase of Ubuntu: 19.10 Expected outcome: Music plays on the internal speakers and headphones. Actual outcome: I can barely hear audio using headphones with volume turned up to 150%. Absolutely nothing comes out of the speakers. (The speakers sound great under Windows 10.) Complete alsa-info output is attached, but here are some snippets: !!DMI Information !!--- Manufacturer: SAMSUNG ELECTRONICS CO., LTD. Product Name: 950SBE/951SBE Product Version: P06RES Firmware Version: P06RES.075.190529.SP Board Vendor: SAMSUNG ELECTRONICS CO., LTD. Board Name:NP950SBE-K01US !!Kernel Information !!-- Kernel release:5.3.0-19-generic Operating System: GNU/Linux Architecture: x86_64 Processor: x86_64 SMP Enabled: Yes !!ALSA Version !! Driver version: k5.3.0-19-generic Library version:1.1.9 Utilities version: 1.1.9 !!Loaded ALSA modules !!--- snd_hda_intel !!Sound Servers on this system !! Pulseaudio: Installed - Yes (/usr/bin/pulseaudio) Running - Yes !!Soundcards recognised by ALSA !!- 0 [PCH]: HDA-Intel - HDA Intel PCH HDA Intel PCH at 0x604b118000 irq 177 !!PCI Soundcards installed in the system !!-- 00:1f.3 Multimedia audio controller: Intel Corporation Cannon Point-LP High Definition Audio Controller (rev 11) !!Advanced information - PCI Vendor/Device/Subsystem ID's !!--- 00:1f.3 0401: 8086:9dc8 (rev 11) DeviceName: Onboard - Sound !!HDA-Intel Codec information !!--- --startcollapse-- Codec: Realtek ALC298 Address: 0 AFG Function Id: 0x1 (unsol 1) Vendor Id: 0x10ec0298 Subsystem Id: 0x144dc812 Revision Id: 0x100103 No Modem Function Group found Default PCM: rates [0x60]: 44100 48000 bits [0xe]: 16 20 24 formats [0x1]: PCM Default Amp-In caps: N/A Default Amp-Out caps: N/A State of AFG node 0x01: Power states: D0 D1 D2 D3 D3cold CLKSTOP EPSS Power: setting=D0, actual=D0 GPIO: io=8, o=0, i=0, unsolicited=1, wake=0 IO[0]: enable=0, dir=0, wake=0, sticky=0, data=0, unsol=0 IO[1]: enable=0, dir=0, wake=0, sticky=0, data=0, unsol=0 IO[2]: enable=0, dir=0, wake=0, sticky=0, data=0, unsol=0 IO[3]: enable=0, dir=0, wake=0, sticky=0, data=0, unsol=0 IO[4]: enable=0, dir=0, wake=0, sticky=0, data=0, unsol=0 IO[5]: enable=0, dir=0, wake=0, sticky=0, data=0, unsol=0 IO[6]: enable=0, dir=0, wake=0, sticky=0, data=0, unsol=0 IO[7]: enable=0, dir=0, wake=0, sticky=0, data=0, unsol=0 Node 0x02 [Audio Output] wcaps 0x41d: Stereo Amp-Out Control: name="Headphone Playback Volume", index=0, device=0 ControlAmp: chs=3, dir=Out, idx=0, ofs=0 Device: name="ALC298 Analog", type="Audio", device=0 Amp-Out caps: ofs=0x7f, nsteps=0x7f, stepsize=0x01, mute=0 Amp-Out vals: [0x00 0x00] Converter: stream=1, channel=0 PCM: rates [0x60]: 44100 48000 bits [0xe]: 16 20 24 formats [0x1]: PCM Power states: D0 D1 D2 D3 EPSS Power: setting=D0, actual=D0 Node 0x03 [Audio Output] wcaps 0x41d: Stereo Amp-Out Control: name="Speaker Playback Volume", index=0, device=0 ControlAmp: chs=3, dir=Out, idx=0, ofs=0 Amp-Out caps: ofs=0x7f, nsteps=0x7f, stepsize=0x01, mute=0 Amp-Out vals: [0x7f 0x7f] Converter: stream=1, channel=0 ProblemType: Bug DistroRelease: Ubuntu 19.10 Package: alsa-base 1.0.25+dfsg-0ubuntu5 ProcVersionSignature: Ubuntu 5.3.0-19.20-generic 5.3.1 Uname: Linux 5.3.0-19-generic x86_64 ApportVersion: 2.20.11-0ubuntu8.2 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: martin 1383 F pulseaudio CurrentDesktop: ubuntu:GNOME Date: Wed Nov 6 06:20:08 2019 InstallationDate: Installed on 2019-11-03 (3 days ago) InstallationMedia: Ubuntu 19.10 "Eoan Ermine" - Release amd64 (20191017) PackageArchitecture: all ProcEnviron: TERM=xterm-256color PATH=(custom, no user) XDG_RUNTIME_DIR= LANG=en
[Touch-packages] [Bug 1851518] Re: [950SBE/951SBE, Realtek ALC298, Speaker, Internal] No sound on internal speakers, very very quiet on headphones
for got the variable for browsers fix (if it happens to you). Add `GTK_IM_MODULE=xim` to /etc/security/pam_env.conf file. -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to alsa-driver in Ubuntu. https://bugs.launchpad.net/bugs/1851518 Title: [950SBE/951SBE, Realtek ALC298, Speaker, Internal] No sound on internal speakers, very very quiet on headphones Status in alsa-driver package in Ubuntu: Confirmed Bug description: I've been googling this issue for 10's of hours and tried many things. Relase of Ubuntu: 19.10 Expected outcome: Music plays on the internal speakers and headphones. Actual outcome: I can barely hear audio using headphones with volume turned up to 150%. Absolutely nothing comes out of the speakers. (The speakers sound great under Windows 10.) Complete alsa-info output is attached, but here are some snippets: !!DMI Information !!--- Manufacturer: SAMSUNG ELECTRONICS CO., LTD. Product Name: 950SBE/951SBE Product Version: P06RES Firmware Version: P06RES.075.190529.SP Board Vendor: SAMSUNG ELECTRONICS CO., LTD. Board Name:NP950SBE-K01US !!Kernel Information !!-- Kernel release:5.3.0-19-generic Operating System: GNU/Linux Architecture: x86_64 Processor: x86_64 SMP Enabled: Yes !!ALSA Version !! Driver version: k5.3.0-19-generic Library version:1.1.9 Utilities version: 1.1.9 !!Loaded ALSA modules !!--- snd_hda_intel !!Sound Servers on this system !! Pulseaudio: Installed - Yes (/usr/bin/pulseaudio) Running - Yes !!Soundcards recognised by ALSA !!- 0 [PCH]: HDA-Intel - HDA Intel PCH HDA Intel PCH at 0x604b118000 irq 177 !!PCI Soundcards installed in the system !!-- 00:1f.3 Multimedia audio controller: Intel Corporation Cannon Point-LP High Definition Audio Controller (rev 11) !!Advanced information - PCI Vendor/Device/Subsystem ID's !!--- 00:1f.3 0401: 8086:9dc8 (rev 11) DeviceName: Onboard - Sound !!HDA-Intel Codec information !!--- --startcollapse-- Codec: Realtek ALC298 Address: 0 AFG Function Id: 0x1 (unsol 1) Vendor Id: 0x10ec0298 Subsystem Id: 0x144dc812 Revision Id: 0x100103 No Modem Function Group found Default PCM: rates [0x60]: 44100 48000 bits [0xe]: 16 20 24 formats [0x1]: PCM Default Amp-In caps: N/A Default Amp-Out caps: N/A State of AFG node 0x01: Power states: D0 D1 D2 D3 D3cold CLKSTOP EPSS Power: setting=D0, actual=D0 GPIO: io=8, o=0, i=0, unsolicited=1, wake=0 IO[0]: enable=0, dir=0, wake=0, sticky=0, data=0, unsol=0 IO[1]: enable=0, dir=0, wake=0, sticky=0, data=0, unsol=0 IO[2]: enable=0, dir=0, wake=0, sticky=0, data=0, unsol=0 IO[3]: enable=0, dir=0, wake=0, sticky=0, data=0, unsol=0 IO[4]: enable=0, dir=0, wake=0, sticky=0, data=0, unsol=0 IO[5]: enable=0, dir=0, wake=0, sticky=0, data=0, unsol=0 IO[6]: enable=0, dir=0, wake=0, sticky=0, data=0, unsol=0 IO[7]: enable=0, dir=0, wake=0, sticky=0, data=0, unsol=0 Node 0x02 [Audio Output] wcaps 0x41d: Stereo Amp-Out Control: name="Headphone Playback Volume", index=0, device=0 ControlAmp: chs=3, dir=Out, idx=0, ofs=0 Device: name="ALC298 Analog", type="Audio", device=0 Amp-Out caps: ofs=0x7f, nsteps=0x7f, stepsize=0x01, mute=0 Amp-Out vals: [0x00 0x00] Converter: stream=1, channel=0 PCM: rates [0x60]: 44100 48000 bits [0xe]: 16 20 24 formats [0x1]: PCM Power states: D0 D1 D2 D3 EPSS Power: setting=D0, actual=D0 Node 0x03 [Audio Output] wcaps 0x41d: Stereo Amp-Out Control: name="Speaker Playback Volume", index=0, device=0 ControlAmp: chs=3, dir=Out, idx=0, ofs=0 Amp-Out caps: ofs=0x7f, nsteps=0x7f, stepsize=0x01, mute=0 Amp-Out vals: [0x7f 0x7f] Converter: stream=1, channel=0 ProblemType: Bug DistroRelease: Ubuntu 19.10 Package: alsa-base 1.0.25+dfsg-0ubuntu5 ProcVersionSignature: Ubuntu 5.3.0-19.20-generic 5.3.1 Uname: Linux 5.3.0-19-generic x86_64 ApportVersion: 2.20.11-0ubuntu8.2 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: martin 1383 F pulseaudio CurrentDesktop: ubuntu:GNOME Date: Wed Nov 6 06:20:08 2019 InstallationDate: Installed on 2019-11-03 (3 days ago) InstallationMedia: Ubuntu 19.10 "Eoan Ermine" - Release amd64 (20191017) PackageArchitecture: all ProcEnviron: TERM=xterm-256color PATH=(custom, no user) XDG_RUNTIME_DIR= LANG=en_US.UTF-8 SHELL=/bin/bash SourcePackage: alsa-driver Symptom: audio S
[Touch-packages] [Bug 1851518] Re: [950SBE/951SBE, Realtek ALC298, Speaker, Internal] No sound on internal speakers, very very quiet on headphones
Here's the full procedure to fix the headphones. Step 1: Do the patch above, you can skip the [model] line if you wish since I found it had no effects on anything. Please note that the subsystem id can be different for various laptops (lenovo samsung etc...) so make sure you have the correctfor the [codec] line values. To get these three values you can use https://github.com/jeremycline/hda-analyzer which requires python2 and pygtk module to run correctly. Another way is to use `sudo alsa-info.sh` command from terminal (press n when asked to upload information) to find the values. It will create a file under tmp folder which you can open via sudo vi or nano. Inside the file is a line !!HDA-Intel Codec information under which you will find the 3 values required for early patch to work, here's mine: ... Address: 0 AFG Function Id: 0x1 (unsol 1) Vendor Id: 0x10ec0298 Subsystem Id: 0x144dc169 ... PS: if you experience issues with typing in firefox/chromium then add the variable mentioned at the beginning of this post and restart. PS2: if you are a hero, then see gannon's C patch doing this same thing in a more reliable way (custom kernel). -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to alsa-driver in Ubuntu. https://bugs.launchpad.net/bugs/1851518 Title: [950SBE/951SBE, Realtek ALC298, Speaker, Internal] No sound on internal speakers, very very quiet on headphones Status in alsa-driver package in Ubuntu: Confirmed Bug description: I've been googling this issue for 10's of hours and tried many things. Relase of Ubuntu: 19.10 Expected outcome: Music plays on the internal speakers and headphones. Actual outcome: I can barely hear audio using headphones with volume turned up to 150%. Absolutely nothing comes out of the speakers. (The speakers sound great under Windows 10.) Complete alsa-info output is attached, but here are some snippets: !!DMI Information !!--- Manufacturer: SAMSUNG ELECTRONICS CO., LTD. Product Name: 950SBE/951SBE Product Version: P06RES Firmware Version: P06RES.075.190529.SP Board Vendor: SAMSUNG ELECTRONICS CO., LTD. Board Name:NP950SBE-K01US !!Kernel Information !!-- Kernel release:5.3.0-19-generic Operating System: GNU/Linux Architecture: x86_64 Processor: x86_64 SMP Enabled: Yes !!ALSA Version !! Driver version: k5.3.0-19-generic Library version:1.1.9 Utilities version: 1.1.9 !!Loaded ALSA modules !!--- snd_hda_intel !!Sound Servers on this system !! Pulseaudio: Installed - Yes (/usr/bin/pulseaudio) Running - Yes !!Soundcards recognised by ALSA !!- 0 [PCH]: HDA-Intel - HDA Intel PCH HDA Intel PCH at 0x604b118000 irq 177 !!PCI Soundcards installed in the system !!-- 00:1f.3 Multimedia audio controller: Intel Corporation Cannon Point-LP High Definition Audio Controller (rev 11) !!Advanced information - PCI Vendor/Device/Subsystem ID's !!--- 00:1f.3 0401: 8086:9dc8 (rev 11) DeviceName: Onboard - Sound !!HDA-Intel Codec information !!--- --startcollapse-- Codec: Realtek ALC298 Address: 0 AFG Function Id: 0x1 (unsol 1) Vendor Id: 0x10ec0298 Subsystem Id: 0x144dc812 Revision Id: 0x100103 No Modem Function Group found Default PCM: rates [0x60]: 44100 48000 bits [0xe]: 16 20 24 formats [0x1]: PCM Default Amp-In caps: N/A Default Amp-Out caps: N/A State of AFG node 0x01: Power states: D0 D1 D2 D3 D3cold CLKSTOP EPSS Power: setting=D0, actual=D0 GPIO: io=8, o=0, i=0, unsolicited=1, wake=0 IO[0]: enable=0, dir=0, wake=0, sticky=0, data=0, unsol=0 IO[1]: enable=0, dir=0, wake=0, sticky=0, data=0, unsol=0 IO[2]: enable=0, dir=0, wake=0, sticky=0, data=0, unsol=0 IO[3]: enable=0, dir=0, wake=0, sticky=0, data=0, unsol=0 IO[4]: enable=0, dir=0, wake=0, sticky=0, data=0, unsol=0 IO[5]: enable=0, dir=0, wake=0, sticky=0, data=0, unsol=0 IO[6]: enable=0, dir=0, wake=0, sticky=0, data=0, unsol=0 IO[7]: enable=0, dir=0, wake=0, sticky=0, data=0, unsol=0 Node 0x02 [Audio Output] wcaps 0x41d: Stereo Amp-Out Control: name="Headphone Playback Volume", index=0, device=0 ControlAmp: chs=3, dir=Out, idx=0, ofs=0 Device: name="ALC298 Analog", type="Audio", device=0 Amp-Out caps: ofs=0x7f, nsteps=0x7f, stepsize=0x01, mute=0 Amp-Out vals: [0x00 0x00] Converter: stream=1, channel=0 PCM: rates [0x60]: 44100 48000 bits [0xe]: 16 20 24 formats [0x1]: PCM Power states: D0 D1 D2 D3 EPSS Power: setting=D0, actual=D
[Touch-packages] [Bug 1851518] Re: [950SBE/951SBE, Realtek ALC298, Speaker, Internal] No sound on internal speakers, very very quiet on headphones
I have been trying to get ALC298 working for a while now and wanted to share my findings. This issue exist on all distros and is an ALSA problem (not pulseaudio). Verified it when found a fix for the headphone by using the kernel's early patching feature. To use this feature, write a simple patch (instructions here https://www.kernel.org/doc/html/v5.0/sound/hd-audio/notes.html): [codec] 0x10ec0298 0x144dc169 0 [model] auto [verb] 0x1a 0x707 0xc5 and save it as /lib/firmware/alc298-sound-patch.fw then save: options snd-hda-intel patch=alc298-sound-patch.fw,alc298-sound- patch.fw,alc298-sound-patch.fw,alc298-sound-patch.fw to /etc/modprobe.d/alc298-sound-patch.conf Then reboot the machine and try your headphones. Next speakers! unfortunately all three mixer pins in the hda codec are set to mute and I'm working like a maniac to find a way of unmuting them, hoping that would fix the speakers. Hope this helps someone. Went from web development to system development over this issue. Some may call that progress! -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to alsa-driver in Ubuntu. https://bugs.launchpad.net/bugs/1851518 Title: [950SBE/951SBE, Realtek ALC298, Speaker, Internal] No sound on internal speakers, very very quiet on headphones Status in alsa-driver package in Ubuntu: Confirmed Bug description: I've been googling this issue for 10's of hours and tried many things. Relase of Ubuntu: 19.10 Expected outcome: Music plays on the internal speakers and headphones. Actual outcome: I can barely hear audio using headphones with volume turned up to 150%. Absolutely nothing comes out of the speakers. (The speakers sound great under Windows 10.) Complete alsa-info output is attached, but here are some snippets: !!DMI Information !!--- Manufacturer: SAMSUNG ELECTRONICS CO., LTD. Product Name: 950SBE/951SBE Product Version: P06RES Firmware Version: P06RES.075.190529.SP Board Vendor: SAMSUNG ELECTRONICS CO., LTD. Board Name:NP950SBE-K01US !!Kernel Information !!-- Kernel release:5.3.0-19-generic Operating System: GNU/Linux Architecture: x86_64 Processor: x86_64 SMP Enabled: Yes !!ALSA Version !! Driver version: k5.3.0-19-generic Library version:1.1.9 Utilities version: 1.1.9 !!Loaded ALSA modules !!--- snd_hda_intel !!Sound Servers on this system !! Pulseaudio: Installed - Yes (/usr/bin/pulseaudio) Running - Yes !!Soundcards recognised by ALSA !!- 0 [PCH]: HDA-Intel - HDA Intel PCH HDA Intel PCH at 0x604b118000 irq 177 !!PCI Soundcards installed in the system !!-- 00:1f.3 Multimedia audio controller: Intel Corporation Cannon Point-LP High Definition Audio Controller (rev 11) !!Advanced information - PCI Vendor/Device/Subsystem ID's !!--- 00:1f.3 0401: 8086:9dc8 (rev 11) DeviceName: Onboard - Sound !!HDA-Intel Codec information !!--- --startcollapse-- Codec: Realtek ALC298 Address: 0 AFG Function Id: 0x1 (unsol 1) Vendor Id: 0x10ec0298 Subsystem Id: 0x144dc812 Revision Id: 0x100103 No Modem Function Group found Default PCM: rates [0x60]: 44100 48000 bits [0xe]: 16 20 24 formats [0x1]: PCM Default Amp-In caps: N/A Default Amp-Out caps: N/A State of AFG node 0x01: Power states: D0 D1 D2 D3 D3cold CLKSTOP EPSS Power: setting=D0, actual=D0 GPIO: io=8, o=0, i=0, unsolicited=1, wake=0 IO[0]: enable=0, dir=0, wake=0, sticky=0, data=0, unsol=0 IO[1]: enable=0, dir=0, wake=0, sticky=0, data=0, unsol=0 IO[2]: enable=0, dir=0, wake=0, sticky=0, data=0, unsol=0 IO[3]: enable=0, dir=0, wake=0, sticky=0, data=0, unsol=0 IO[4]: enable=0, dir=0, wake=0, sticky=0, data=0, unsol=0 IO[5]: enable=0, dir=0, wake=0, sticky=0, data=0, unsol=0 IO[6]: enable=0, dir=0, wake=0, sticky=0, data=0, unsol=0 IO[7]: enable=0, dir=0, wake=0, sticky=0, data=0, unsol=0 Node 0x02 [Audio Output] wcaps 0x41d: Stereo Amp-Out Control: name="Headphone Playback Volume", index=0, device=0 ControlAmp: chs=3, dir=Out, idx=0, ofs=0 Device: name="ALC298 Analog", type="Audio", device=0 Amp-Out caps: ofs=0x7f, nsteps=0x7f, stepsize=0x01, mute=0 Amp-Out vals: [0x00 0x00] Converter: stream=1, channel=0 PCM: rates [0x60]: 44100 48000 bits [0xe]: 16 20 24 formats [0x1]: PCM Power states: D0 D1 D2 D3 EPSS Power: setting=D0, actual=D0 Node 0x03 [Audio Output] wcaps 0x41d: Stereo Amp-Out Control: name="Speaker Playback Volume", index=0, device=0 ControlAmp: chs=
[Touch-packages] [Bug 1851518] Re: [950SBE/951SBE, Realtek ALC298, Speaker, Internal] No sound on internal speakers, very very quiet on headphones
I attached the Realtek dump with my headphones plugged into the jack for comparison. ** Attachment added: "RtHDDump.txt.headphonesInJack" https://bugs.launchpad.net/ubuntu/+source/alsa-driver/+bug/1851518/+attachment/5353097/+files/RtHDDump.txt.headphonesInJack -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to alsa-driver in Ubuntu. https://bugs.launchpad.net/bugs/1851518 Title: [950SBE/951SBE, Realtek ALC298, Speaker, Internal] No sound on internal speakers, very very quiet on headphones Status in alsa-driver package in Ubuntu: Confirmed Bug description: I've been googling this issue for 10's of hours and tried many things. Relase of Ubuntu: 19.10 Expected outcome: Music plays on the internal speakers and headphones. Actual outcome: I can barely hear audio using headphones with volume turned up to 150%. Absolutely nothing comes out of the speakers. (The speakers sound great under Windows 10.) Complete alsa-info output is attached, but here are some snippets: !!DMI Information !!--- Manufacturer: SAMSUNG ELECTRONICS CO., LTD. Product Name: 950SBE/951SBE Product Version: P06RES Firmware Version: P06RES.075.190529.SP Board Vendor: SAMSUNG ELECTRONICS CO., LTD. Board Name:NP950SBE-K01US !!Kernel Information !!-- Kernel release:5.3.0-19-generic Operating System: GNU/Linux Architecture: x86_64 Processor: x86_64 SMP Enabled: Yes !!ALSA Version !! Driver version: k5.3.0-19-generic Library version:1.1.9 Utilities version: 1.1.9 !!Loaded ALSA modules !!--- snd_hda_intel !!Sound Servers on this system !! Pulseaudio: Installed - Yes (/usr/bin/pulseaudio) Running - Yes !!Soundcards recognised by ALSA !!- 0 [PCH]: HDA-Intel - HDA Intel PCH HDA Intel PCH at 0x604b118000 irq 177 !!PCI Soundcards installed in the system !!-- 00:1f.3 Multimedia audio controller: Intel Corporation Cannon Point-LP High Definition Audio Controller (rev 11) !!Advanced information - PCI Vendor/Device/Subsystem ID's !!--- 00:1f.3 0401: 8086:9dc8 (rev 11) DeviceName: Onboard - Sound !!HDA-Intel Codec information !!--- --startcollapse-- Codec: Realtek ALC298 Address: 0 AFG Function Id: 0x1 (unsol 1) Vendor Id: 0x10ec0298 Subsystem Id: 0x144dc812 Revision Id: 0x100103 No Modem Function Group found Default PCM: rates [0x60]: 44100 48000 bits [0xe]: 16 20 24 formats [0x1]: PCM Default Amp-In caps: N/A Default Amp-Out caps: N/A State of AFG node 0x01: Power states: D0 D1 D2 D3 D3cold CLKSTOP EPSS Power: setting=D0, actual=D0 GPIO: io=8, o=0, i=0, unsolicited=1, wake=0 IO[0]: enable=0, dir=0, wake=0, sticky=0, data=0, unsol=0 IO[1]: enable=0, dir=0, wake=0, sticky=0, data=0, unsol=0 IO[2]: enable=0, dir=0, wake=0, sticky=0, data=0, unsol=0 IO[3]: enable=0, dir=0, wake=0, sticky=0, data=0, unsol=0 IO[4]: enable=0, dir=0, wake=0, sticky=0, data=0, unsol=0 IO[5]: enable=0, dir=0, wake=0, sticky=0, data=0, unsol=0 IO[6]: enable=0, dir=0, wake=0, sticky=0, data=0, unsol=0 IO[7]: enable=0, dir=0, wake=0, sticky=0, data=0, unsol=0 Node 0x02 [Audio Output] wcaps 0x41d: Stereo Amp-Out Control: name="Headphone Playback Volume", index=0, device=0 ControlAmp: chs=3, dir=Out, idx=0, ofs=0 Device: name="ALC298 Analog", type="Audio", device=0 Amp-Out caps: ofs=0x7f, nsteps=0x7f, stepsize=0x01, mute=0 Amp-Out vals: [0x00 0x00] Converter: stream=1, channel=0 PCM: rates [0x60]: 44100 48000 bits [0xe]: 16 20 24 formats [0x1]: PCM Power states: D0 D1 D2 D3 EPSS Power: setting=D0, actual=D0 Node 0x03 [Audio Output] wcaps 0x41d: Stereo Amp-Out Control: name="Speaker Playback Volume", index=0, device=0 ControlAmp: chs=3, dir=Out, idx=0, ofs=0 Amp-Out caps: ofs=0x7f, nsteps=0x7f, stepsize=0x01, mute=0 Amp-Out vals: [0x7f 0x7f] Converter: stream=1, channel=0 ProblemType: Bug DistroRelease: Ubuntu 19.10 Package: alsa-base 1.0.25+dfsg-0ubuntu5 ProcVersionSignature: Ubuntu 5.3.0-19.20-generic 5.3.1 Uname: Linux 5.3.0-19-generic x86_64 ApportVersion: 2.20.11-0ubuntu8.2 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: martin 1383 F pulseaudio CurrentDesktop: ubuntu:GNOME Date: Wed Nov 6 06:20:08 2019 InstallationDate: Installed on 2019-11-03 (3 days ago) InstallationMedia: Ubuntu 19.10 "Eoan Ermine" - Release amd64 (20191017) PackageArchitecture: all ProcEnviron: TERM=xter
[Touch-packages] [Bug 1851518] Re: [950SBE/951SBE, Realtek ALC298, Speaker, Internal] No sound on internal speakers, very very quiet on headphones
Exactly the same problem with Samsung Notebook 9 Pro (np930mbe-k04us) which also has an ALC298. Headphones are working with model=mono-speakers. I attached my Realtek dump. I'm also soliciting the arch forum for help (I'm running arch): https://bbs.archlinux.org/viewtopic.php?pid=1897858 ** Attachment added: "RtHDDump.txt" https://bugs.launchpad.net/ubuntu/+source/alsa-driver/+bug/1851518/+attachment/5353056/+files/RtHDDump.txt -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to alsa-driver in Ubuntu. https://bugs.launchpad.net/bugs/1851518 Title: [950SBE/951SBE, Realtek ALC298, Speaker, Internal] No sound on internal speakers, very very quiet on headphones Status in alsa-driver package in Ubuntu: Confirmed Bug description: I've been googling this issue for 10's of hours and tried many things. Relase of Ubuntu: 19.10 Expected outcome: Music plays on the internal speakers and headphones. Actual outcome: I can barely hear audio using headphones with volume turned up to 150%. Absolutely nothing comes out of the speakers. (The speakers sound great under Windows 10.) Complete alsa-info output is attached, but here are some snippets: !!DMI Information !!--- Manufacturer: SAMSUNG ELECTRONICS CO., LTD. Product Name: 950SBE/951SBE Product Version: P06RES Firmware Version: P06RES.075.190529.SP Board Vendor: SAMSUNG ELECTRONICS CO., LTD. Board Name:NP950SBE-K01US !!Kernel Information !!-- Kernel release:5.3.0-19-generic Operating System: GNU/Linux Architecture: x86_64 Processor: x86_64 SMP Enabled: Yes !!ALSA Version !! Driver version: k5.3.0-19-generic Library version:1.1.9 Utilities version: 1.1.9 !!Loaded ALSA modules !!--- snd_hda_intel !!Sound Servers on this system !! Pulseaudio: Installed - Yes (/usr/bin/pulseaudio) Running - Yes !!Soundcards recognised by ALSA !!- 0 [PCH]: HDA-Intel - HDA Intel PCH HDA Intel PCH at 0x604b118000 irq 177 !!PCI Soundcards installed in the system !!-- 00:1f.3 Multimedia audio controller: Intel Corporation Cannon Point-LP High Definition Audio Controller (rev 11) !!Advanced information - PCI Vendor/Device/Subsystem ID's !!--- 00:1f.3 0401: 8086:9dc8 (rev 11) DeviceName: Onboard - Sound !!HDA-Intel Codec information !!--- --startcollapse-- Codec: Realtek ALC298 Address: 0 AFG Function Id: 0x1 (unsol 1) Vendor Id: 0x10ec0298 Subsystem Id: 0x144dc812 Revision Id: 0x100103 No Modem Function Group found Default PCM: rates [0x60]: 44100 48000 bits [0xe]: 16 20 24 formats [0x1]: PCM Default Amp-In caps: N/A Default Amp-Out caps: N/A State of AFG node 0x01: Power states: D0 D1 D2 D3 D3cold CLKSTOP EPSS Power: setting=D0, actual=D0 GPIO: io=8, o=0, i=0, unsolicited=1, wake=0 IO[0]: enable=0, dir=0, wake=0, sticky=0, data=0, unsol=0 IO[1]: enable=0, dir=0, wake=0, sticky=0, data=0, unsol=0 IO[2]: enable=0, dir=0, wake=0, sticky=0, data=0, unsol=0 IO[3]: enable=0, dir=0, wake=0, sticky=0, data=0, unsol=0 IO[4]: enable=0, dir=0, wake=0, sticky=0, data=0, unsol=0 IO[5]: enable=0, dir=0, wake=0, sticky=0, data=0, unsol=0 IO[6]: enable=0, dir=0, wake=0, sticky=0, data=0, unsol=0 IO[7]: enable=0, dir=0, wake=0, sticky=0, data=0, unsol=0 Node 0x02 [Audio Output] wcaps 0x41d: Stereo Amp-Out Control: name="Headphone Playback Volume", index=0, device=0 ControlAmp: chs=3, dir=Out, idx=0, ofs=0 Device: name="ALC298 Analog", type="Audio", device=0 Amp-Out caps: ofs=0x7f, nsteps=0x7f, stepsize=0x01, mute=0 Amp-Out vals: [0x00 0x00] Converter: stream=1, channel=0 PCM: rates [0x60]: 44100 48000 bits [0xe]: 16 20 24 formats [0x1]: PCM Power states: D0 D1 D2 D3 EPSS Power: setting=D0, actual=D0 Node 0x03 [Audio Output] wcaps 0x41d: Stereo Amp-Out Control: name="Speaker Playback Volume", index=0, device=0 ControlAmp: chs=3, dir=Out, idx=0, ofs=0 Amp-Out caps: ofs=0x7f, nsteps=0x7f, stepsize=0x01, mute=0 Amp-Out vals: [0x7f 0x7f] Converter: stream=1, channel=0 ProblemType: Bug DistroRelease: Ubuntu 19.10 Package: alsa-base 1.0.25+dfsg-0ubuntu5 ProcVersionSignature: Ubuntu 5.3.0-19.20-generic 5.3.1 Uname: Linux 5.3.0-19-generic x86_64 ApportVersion: 2.20.11-0ubuntu8.2 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: martin 1383 F pulseaudio CurrentDesktop: ubuntu:GNOME Date: Wed Nov 6 06:20:08 2019 Installati
[Touch-packages] [Bug 1851518] Re: [950SBE/951SBE, Realtek ALC298, Speaker, Internal] No sound on internal speakers, very very quiet on headphones
Same problem with Samsung Galaxy Book Flex 930QCG. The Samsung Galaxy Chromebook and Galaxy Book Flex look very similar, the sound chip should be the same, the Chromebook is open source and also uses the Linux kernel, can we refer to the Chromebook code? -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to alsa-driver in Ubuntu. https://bugs.launchpad.net/bugs/1851518 Title: [950SBE/951SBE, Realtek ALC298, Speaker, Internal] No sound on internal speakers, very very quiet on headphones Status in alsa-driver package in Ubuntu: Confirmed Bug description: I've been googling this issue for 10's of hours and tried many things. Relase of Ubuntu: 19.10 Expected outcome: Music plays on the internal speakers and headphones. Actual outcome: I can barely hear audio using headphones with volume turned up to 150%. Absolutely nothing comes out of the speakers. (The speakers sound great under Windows 10.) Complete alsa-info output is attached, but here are some snippets: !!DMI Information !!--- Manufacturer: SAMSUNG ELECTRONICS CO., LTD. Product Name: 950SBE/951SBE Product Version: P06RES Firmware Version: P06RES.075.190529.SP Board Vendor: SAMSUNG ELECTRONICS CO., LTD. Board Name:NP950SBE-K01US !!Kernel Information !!-- Kernel release:5.3.0-19-generic Operating System: GNU/Linux Architecture: x86_64 Processor: x86_64 SMP Enabled: Yes !!ALSA Version !! Driver version: k5.3.0-19-generic Library version:1.1.9 Utilities version: 1.1.9 !!Loaded ALSA modules !!--- snd_hda_intel !!Sound Servers on this system !! Pulseaudio: Installed - Yes (/usr/bin/pulseaudio) Running - Yes !!Soundcards recognised by ALSA !!- 0 [PCH]: HDA-Intel - HDA Intel PCH HDA Intel PCH at 0x604b118000 irq 177 !!PCI Soundcards installed in the system !!-- 00:1f.3 Multimedia audio controller: Intel Corporation Cannon Point-LP High Definition Audio Controller (rev 11) !!Advanced information - PCI Vendor/Device/Subsystem ID's !!--- 00:1f.3 0401: 8086:9dc8 (rev 11) DeviceName: Onboard - Sound !!HDA-Intel Codec information !!--- --startcollapse-- Codec: Realtek ALC298 Address: 0 AFG Function Id: 0x1 (unsol 1) Vendor Id: 0x10ec0298 Subsystem Id: 0x144dc812 Revision Id: 0x100103 No Modem Function Group found Default PCM: rates [0x60]: 44100 48000 bits [0xe]: 16 20 24 formats [0x1]: PCM Default Amp-In caps: N/A Default Amp-Out caps: N/A State of AFG node 0x01: Power states: D0 D1 D2 D3 D3cold CLKSTOP EPSS Power: setting=D0, actual=D0 GPIO: io=8, o=0, i=0, unsolicited=1, wake=0 IO[0]: enable=0, dir=0, wake=0, sticky=0, data=0, unsol=0 IO[1]: enable=0, dir=0, wake=0, sticky=0, data=0, unsol=0 IO[2]: enable=0, dir=0, wake=0, sticky=0, data=0, unsol=0 IO[3]: enable=0, dir=0, wake=0, sticky=0, data=0, unsol=0 IO[4]: enable=0, dir=0, wake=0, sticky=0, data=0, unsol=0 IO[5]: enable=0, dir=0, wake=0, sticky=0, data=0, unsol=0 IO[6]: enable=0, dir=0, wake=0, sticky=0, data=0, unsol=0 IO[7]: enable=0, dir=0, wake=0, sticky=0, data=0, unsol=0 Node 0x02 [Audio Output] wcaps 0x41d: Stereo Amp-Out Control: name="Headphone Playback Volume", index=0, device=0 ControlAmp: chs=3, dir=Out, idx=0, ofs=0 Device: name="ALC298 Analog", type="Audio", device=0 Amp-Out caps: ofs=0x7f, nsteps=0x7f, stepsize=0x01, mute=0 Amp-Out vals: [0x00 0x00] Converter: stream=1, channel=0 PCM: rates [0x60]: 44100 48000 bits [0xe]: 16 20 24 formats [0x1]: PCM Power states: D0 D1 D2 D3 EPSS Power: setting=D0, actual=D0 Node 0x03 [Audio Output] wcaps 0x41d: Stereo Amp-Out Control: name="Speaker Playback Volume", index=0, device=0 ControlAmp: chs=3, dir=Out, idx=0, ofs=0 Amp-Out caps: ofs=0x7f, nsteps=0x7f, stepsize=0x01, mute=0 Amp-Out vals: [0x7f 0x7f] Converter: stream=1, channel=0 ProblemType: Bug DistroRelease: Ubuntu 19.10 Package: alsa-base 1.0.25+dfsg-0ubuntu5 ProcVersionSignature: Ubuntu 5.3.0-19.20-generic 5.3.1 Uname: Linux 5.3.0-19-generic x86_64 ApportVersion: 2.20.11-0ubuntu8.2 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: martin 1383 F pulseaudio CurrentDesktop: ubuntu:GNOME Date: Wed Nov 6 06:20:08 2019 InstallationDate: Installed on 2019-11-03 (3 days ago) InstallationMedia: Ubuntu 19.10 "Eoan Ermine" - Release amd64 (20191017) PackageArchitecture: all ProcEnviron: TERM=xterm-256color
[Touch-packages] [Bug 1851518] Re: [950SBE/951SBE, Realtek ALC298, Speaker, Internal] No sound on internal speakers, very very quiet on headphones
Attached my realtek dump. ** Attachment added: "RealTek Dump" https://bugs.launchpad.net/ubuntu/+source/alsa-driver/+bug/1851518/+attachment/5348304/+files/RtHDDump.zip -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to alsa-driver in Ubuntu. https://bugs.launchpad.net/bugs/1851518 Title: [950SBE/951SBE, Realtek ALC298, Speaker, Internal] No sound on internal speakers, very very quiet on headphones Status in alsa-driver package in Ubuntu: Confirmed Bug description: I've been googling this issue for 10's of hours and tried many things. Relase of Ubuntu: 19.10 Expected outcome: Music plays on the internal speakers and headphones. Actual outcome: I can barely hear audio using headphones with volume turned up to 150%. Absolutely nothing comes out of the speakers. (The speakers sound great under Windows 10.) Complete alsa-info output is attached, but here are some snippets: !!DMI Information !!--- Manufacturer: SAMSUNG ELECTRONICS CO., LTD. Product Name: 950SBE/951SBE Product Version: P06RES Firmware Version: P06RES.075.190529.SP Board Vendor: SAMSUNG ELECTRONICS CO., LTD. Board Name:NP950SBE-K01US !!Kernel Information !!-- Kernel release:5.3.0-19-generic Operating System: GNU/Linux Architecture: x86_64 Processor: x86_64 SMP Enabled: Yes !!ALSA Version !! Driver version: k5.3.0-19-generic Library version:1.1.9 Utilities version: 1.1.9 !!Loaded ALSA modules !!--- snd_hda_intel !!Sound Servers on this system !! Pulseaudio: Installed - Yes (/usr/bin/pulseaudio) Running - Yes !!Soundcards recognised by ALSA !!- 0 [PCH]: HDA-Intel - HDA Intel PCH HDA Intel PCH at 0x604b118000 irq 177 !!PCI Soundcards installed in the system !!-- 00:1f.3 Multimedia audio controller: Intel Corporation Cannon Point-LP High Definition Audio Controller (rev 11) !!Advanced information - PCI Vendor/Device/Subsystem ID's !!--- 00:1f.3 0401: 8086:9dc8 (rev 11) DeviceName: Onboard - Sound !!HDA-Intel Codec information !!--- --startcollapse-- Codec: Realtek ALC298 Address: 0 AFG Function Id: 0x1 (unsol 1) Vendor Id: 0x10ec0298 Subsystem Id: 0x144dc812 Revision Id: 0x100103 No Modem Function Group found Default PCM: rates [0x60]: 44100 48000 bits [0xe]: 16 20 24 formats [0x1]: PCM Default Amp-In caps: N/A Default Amp-Out caps: N/A State of AFG node 0x01: Power states: D0 D1 D2 D3 D3cold CLKSTOP EPSS Power: setting=D0, actual=D0 GPIO: io=8, o=0, i=0, unsolicited=1, wake=0 IO[0]: enable=0, dir=0, wake=0, sticky=0, data=0, unsol=0 IO[1]: enable=0, dir=0, wake=0, sticky=0, data=0, unsol=0 IO[2]: enable=0, dir=0, wake=0, sticky=0, data=0, unsol=0 IO[3]: enable=0, dir=0, wake=0, sticky=0, data=0, unsol=0 IO[4]: enable=0, dir=0, wake=0, sticky=0, data=0, unsol=0 IO[5]: enable=0, dir=0, wake=0, sticky=0, data=0, unsol=0 IO[6]: enable=0, dir=0, wake=0, sticky=0, data=0, unsol=0 IO[7]: enable=0, dir=0, wake=0, sticky=0, data=0, unsol=0 Node 0x02 [Audio Output] wcaps 0x41d: Stereo Amp-Out Control: name="Headphone Playback Volume", index=0, device=0 ControlAmp: chs=3, dir=Out, idx=0, ofs=0 Device: name="ALC298 Analog", type="Audio", device=0 Amp-Out caps: ofs=0x7f, nsteps=0x7f, stepsize=0x01, mute=0 Amp-Out vals: [0x00 0x00] Converter: stream=1, channel=0 PCM: rates [0x60]: 44100 48000 bits [0xe]: 16 20 24 formats [0x1]: PCM Power states: D0 D1 D2 D3 EPSS Power: setting=D0, actual=D0 Node 0x03 [Audio Output] wcaps 0x41d: Stereo Amp-Out Control: name="Speaker Playback Volume", index=0, device=0 ControlAmp: chs=3, dir=Out, idx=0, ofs=0 Amp-Out caps: ofs=0x7f, nsteps=0x7f, stepsize=0x01, mute=0 Amp-Out vals: [0x7f 0x7f] Converter: stream=1, channel=0 ProblemType: Bug DistroRelease: Ubuntu 19.10 Package: alsa-base 1.0.25+dfsg-0ubuntu5 ProcVersionSignature: Ubuntu 5.3.0-19.20-generic 5.3.1 Uname: Linux 5.3.0-19-generic x86_64 ApportVersion: 2.20.11-0ubuntu8.2 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: martin 1383 F pulseaudio CurrentDesktop: ubuntu:GNOME Date: Wed Nov 6 06:20:08 2019 InstallationDate: Installed on 2019-11-03 (3 days ago) InstallationMedia: Ubuntu 19.10 "Eoan Ermine" - Release amd64 (20191017) PackageArchitecture: all ProcEnviron: TERM=xterm-256color PATH=(custom, no user) XDG_RUNTIME_DIR= LANG=en_US.UTF-8 SHELL=/bin/ba
[Touch-packages] [Bug 1851518] Re: [950SBE/951SBE, Realtek ALC298, Speaker, Internal] No sound on internal speakers, very very quiet on headphones
I have exactly the same problem on a Samsung Galaxy Flex Book. Headphones are working with the following options snd-hda-intel model=mono-speakers Speakers do not work. -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to alsa-driver in Ubuntu. https://bugs.launchpad.net/bugs/1851518 Title: [950SBE/951SBE, Realtek ALC298, Speaker, Internal] No sound on internal speakers, very very quiet on headphones Status in alsa-driver package in Ubuntu: Confirmed Bug description: I've been googling this issue for 10's of hours and tried many things. Relase of Ubuntu: 19.10 Expected outcome: Music plays on the internal speakers and headphones. Actual outcome: I can barely hear audio using headphones with volume turned up to 150%. Absolutely nothing comes out of the speakers. (The speakers sound great under Windows 10.) Complete alsa-info output is attached, but here are some snippets: !!DMI Information !!--- Manufacturer: SAMSUNG ELECTRONICS CO., LTD. Product Name: 950SBE/951SBE Product Version: P06RES Firmware Version: P06RES.075.190529.SP Board Vendor: SAMSUNG ELECTRONICS CO., LTD. Board Name:NP950SBE-K01US !!Kernel Information !!-- Kernel release:5.3.0-19-generic Operating System: GNU/Linux Architecture: x86_64 Processor: x86_64 SMP Enabled: Yes !!ALSA Version !! Driver version: k5.3.0-19-generic Library version:1.1.9 Utilities version: 1.1.9 !!Loaded ALSA modules !!--- snd_hda_intel !!Sound Servers on this system !! Pulseaudio: Installed - Yes (/usr/bin/pulseaudio) Running - Yes !!Soundcards recognised by ALSA !!- 0 [PCH]: HDA-Intel - HDA Intel PCH HDA Intel PCH at 0x604b118000 irq 177 !!PCI Soundcards installed in the system !!-- 00:1f.3 Multimedia audio controller: Intel Corporation Cannon Point-LP High Definition Audio Controller (rev 11) !!Advanced information - PCI Vendor/Device/Subsystem ID's !!--- 00:1f.3 0401: 8086:9dc8 (rev 11) DeviceName: Onboard - Sound !!HDA-Intel Codec information !!--- --startcollapse-- Codec: Realtek ALC298 Address: 0 AFG Function Id: 0x1 (unsol 1) Vendor Id: 0x10ec0298 Subsystem Id: 0x144dc812 Revision Id: 0x100103 No Modem Function Group found Default PCM: rates [0x60]: 44100 48000 bits [0xe]: 16 20 24 formats [0x1]: PCM Default Amp-In caps: N/A Default Amp-Out caps: N/A State of AFG node 0x01: Power states: D0 D1 D2 D3 D3cold CLKSTOP EPSS Power: setting=D0, actual=D0 GPIO: io=8, o=0, i=0, unsolicited=1, wake=0 IO[0]: enable=0, dir=0, wake=0, sticky=0, data=0, unsol=0 IO[1]: enable=0, dir=0, wake=0, sticky=0, data=0, unsol=0 IO[2]: enable=0, dir=0, wake=0, sticky=0, data=0, unsol=0 IO[3]: enable=0, dir=0, wake=0, sticky=0, data=0, unsol=0 IO[4]: enable=0, dir=0, wake=0, sticky=0, data=0, unsol=0 IO[5]: enable=0, dir=0, wake=0, sticky=0, data=0, unsol=0 IO[6]: enable=0, dir=0, wake=0, sticky=0, data=0, unsol=0 IO[7]: enable=0, dir=0, wake=0, sticky=0, data=0, unsol=0 Node 0x02 [Audio Output] wcaps 0x41d: Stereo Amp-Out Control: name="Headphone Playback Volume", index=0, device=0 ControlAmp: chs=3, dir=Out, idx=0, ofs=0 Device: name="ALC298 Analog", type="Audio", device=0 Amp-Out caps: ofs=0x7f, nsteps=0x7f, stepsize=0x01, mute=0 Amp-Out vals: [0x00 0x00] Converter: stream=1, channel=0 PCM: rates [0x60]: 44100 48000 bits [0xe]: 16 20 24 formats [0x1]: PCM Power states: D0 D1 D2 D3 EPSS Power: setting=D0, actual=D0 Node 0x03 [Audio Output] wcaps 0x41d: Stereo Amp-Out Control: name="Speaker Playback Volume", index=0, device=0 ControlAmp: chs=3, dir=Out, idx=0, ofs=0 Amp-Out caps: ofs=0x7f, nsteps=0x7f, stepsize=0x01, mute=0 Amp-Out vals: [0x7f 0x7f] Converter: stream=1, channel=0 ProblemType: Bug DistroRelease: Ubuntu 19.10 Package: alsa-base 1.0.25+dfsg-0ubuntu5 ProcVersionSignature: Ubuntu 5.3.0-19.20-generic 5.3.1 Uname: Linux 5.3.0-19-generic x86_64 ApportVersion: 2.20.11-0ubuntu8.2 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: martin 1383 F pulseaudio CurrentDesktop: ubuntu:GNOME Date: Wed Nov 6 06:20:08 2019 InstallationDate: Installed on 2019-11-03 (3 days ago) InstallationMedia: Ubuntu 19.10 "Eoan Ermine" - Release amd64 (20191017) PackageArchitecture: all ProcEnviron: TERM=xterm-256color PATH=(custom, no user) XDG_RUNTIME_DIR= LANG=en_US.UTF-8 SHELL=/bin/bash
[Touch-packages] [Bug 1851518] Re: [950SBE/951SBE, Realtek ALC298, Speaker, Internal] No sound on internal speakers, very very quiet on headphones
I own model NT950SBE, same issue: No sound at headphones and speaker. I tried Ubuntu and Manjaro with latest kernels - no progress. After changing Alss-config according to post #6, haedphones are working now. Thanks. /etc/modprobe.d/alsa-base.conf: options snd-hda-intel model=mono-speakers I attach my Realtek dump-file made in Windows. Hope that helps a bit to get a solution for the problem. ** Attachment added: "RtHDDump.txt" https://bugs.launchpad.net/ubuntu/+source/alsa-driver/+bug/1851518/+attachment/5309144/+files/RtHDDump.txt -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to alsa-driver in Ubuntu. https://bugs.launchpad.net/bugs/1851518 Title: [950SBE/951SBE, Realtek ALC298, Speaker, Internal] No sound on internal speakers, very very quiet on headphones Status in alsa-driver package in Ubuntu: Confirmed Bug description: I've been googling this issue for 10's of hours and tried many things. Relase of Ubuntu: 19.10 Expected outcome: Music plays on the internal speakers and headphones. Actual outcome: I can barely hear audio using headphones with volume turned up to 150%. Absolutely nothing comes out of the speakers. (The speakers sound great under Windows 10.) Complete alsa-info output is attached, but here are some snippets: !!DMI Information !!--- Manufacturer: SAMSUNG ELECTRONICS CO., LTD. Product Name: 950SBE/951SBE Product Version: P06RES Firmware Version: P06RES.075.190529.SP Board Vendor: SAMSUNG ELECTRONICS CO., LTD. Board Name:NP950SBE-K01US !!Kernel Information !!-- Kernel release:5.3.0-19-generic Operating System: GNU/Linux Architecture: x86_64 Processor: x86_64 SMP Enabled: Yes !!ALSA Version !! Driver version: k5.3.0-19-generic Library version:1.1.9 Utilities version: 1.1.9 !!Loaded ALSA modules !!--- snd_hda_intel !!Sound Servers on this system !! Pulseaudio: Installed - Yes (/usr/bin/pulseaudio) Running - Yes !!Soundcards recognised by ALSA !!- 0 [PCH]: HDA-Intel - HDA Intel PCH HDA Intel PCH at 0x604b118000 irq 177 !!PCI Soundcards installed in the system !!-- 00:1f.3 Multimedia audio controller: Intel Corporation Cannon Point-LP High Definition Audio Controller (rev 11) !!Advanced information - PCI Vendor/Device/Subsystem ID's !!--- 00:1f.3 0401: 8086:9dc8 (rev 11) DeviceName: Onboard - Sound !!HDA-Intel Codec information !!--- --startcollapse-- Codec: Realtek ALC298 Address: 0 AFG Function Id: 0x1 (unsol 1) Vendor Id: 0x10ec0298 Subsystem Id: 0x144dc812 Revision Id: 0x100103 No Modem Function Group found Default PCM: rates [0x60]: 44100 48000 bits [0xe]: 16 20 24 formats [0x1]: PCM Default Amp-In caps: N/A Default Amp-Out caps: N/A State of AFG node 0x01: Power states: D0 D1 D2 D3 D3cold CLKSTOP EPSS Power: setting=D0, actual=D0 GPIO: io=8, o=0, i=0, unsolicited=1, wake=0 IO[0]: enable=0, dir=0, wake=0, sticky=0, data=0, unsol=0 IO[1]: enable=0, dir=0, wake=0, sticky=0, data=0, unsol=0 IO[2]: enable=0, dir=0, wake=0, sticky=0, data=0, unsol=0 IO[3]: enable=0, dir=0, wake=0, sticky=0, data=0, unsol=0 IO[4]: enable=0, dir=0, wake=0, sticky=0, data=0, unsol=0 IO[5]: enable=0, dir=0, wake=0, sticky=0, data=0, unsol=0 IO[6]: enable=0, dir=0, wake=0, sticky=0, data=0, unsol=0 IO[7]: enable=0, dir=0, wake=0, sticky=0, data=0, unsol=0 Node 0x02 [Audio Output] wcaps 0x41d: Stereo Amp-Out Control: name="Headphone Playback Volume", index=0, device=0 ControlAmp: chs=3, dir=Out, idx=0, ofs=0 Device: name="ALC298 Analog", type="Audio", device=0 Amp-Out caps: ofs=0x7f, nsteps=0x7f, stepsize=0x01, mute=0 Amp-Out vals: [0x00 0x00] Converter: stream=1, channel=0 PCM: rates [0x60]: 44100 48000 bits [0xe]: 16 20 24 formats [0x1]: PCM Power states: D0 D1 D2 D3 EPSS Power: setting=D0, actual=D0 Node 0x03 [Audio Output] wcaps 0x41d: Stereo Amp-Out Control: name="Speaker Playback Volume", index=0, device=0 ControlAmp: chs=3, dir=Out, idx=0, ofs=0 Amp-Out caps: ofs=0x7f, nsteps=0x7f, stepsize=0x01, mute=0 Amp-Out vals: [0x7f 0x7f] Converter: stream=1, channel=0 ProblemType: Bug DistroRelease: Ubuntu 19.10 Package: alsa-base 1.0.25+dfsg-0ubuntu5 ProcVersionSignature: Ubuntu 5.3.0-19.20-generic 5.3.1 Uname: Linux 5.3.0-19-generic x86_64 ApportVersion: 2.20.11-0ubuntu8.2 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: marti
[Touch-packages] [Bug 1851518] Re: [950SBE/951SBE, Realtek ALC298, Speaker, Internal] No sound on internal speakers, very very quiet on headphones
Status changed to 'Confirmed' because the bug affects multiple users. ** Changed in: alsa-driver (Ubuntu) Status: New => Confirmed -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to alsa-driver in Ubuntu. https://bugs.launchpad.net/bugs/1851518 Title: [950SBE/951SBE, Realtek ALC298, Speaker, Internal] No sound on internal speakers, very very quiet on headphones Status in alsa-driver package in Ubuntu: Confirmed Bug description: I've been googling this issue for 10's of hours and tried many things. Relase of Ubuntu: 19.10 Expected outcome: Music plays on the internal speakers and headphones. Actual outcome: I can barely hear audio using headphones with volume turned up to 150%. Absolutely nothing comes out of the speakers. (The speakers sound great under Windows 10.) Complete alsa-info output is attached, but here are some snippets: !!DMI Information !!--- Manufacturer: SAMSUNG ELECTRONICS CO., LTD. Product Name: 950SBE/951SBE Product Version: P06RES Firmware Version: P06RES.075.190529.SP Board Vendor: SAMSUNG ELECTRONICS CO., LTD. Board Name:NP950SBE-K01US !!Kernel Information !!-- Kernel release:5.3.0-19-generic Operating System: GNU/Linux Architecture: x86_64 Processor: x86_64 SMP Enabled: Yes !!ALSA Version !! Driver version: k5.3.0-19-generic Library version:1.1.9 Utilities version: 1.1.9 !!Loaded ALSA modules !!--- snd_hda_intel !!Sound Servers on this system !! Pulseaudio: Installed - Yes (/usr/bin/pulseaudio) Running - Yes !!Soundcards recognised by ALSA !!- 0 [PCH]: HDA-Intel - HDA Intel PCH HDA Intel PCH at 0x604b118000 irq 177 !!PCI Soundcards installed in the system !!-- 00:1f.3 Multimedia audio controller: Intel Corporation Cannon Point-LP High Definition Audio Controller (rev 11) !!Advanced information - PCI Vendor/Device/Subsystem ID's !!--- 00:1f.3 0401: 8086:9dc8 (rev 11) DeviceName: Onboard - Sound !!HDA-Intel Codec information !!--- --startcollapse-- Codec: Realtek ALC298 Address: 0 AFG Function Id: 0x1 (unsol 1) Vendor Id: 0x10ec0298 Subsystem Id: 0x144dc812 Revision Id: 0x100103 No Modem Function Group found Default PCM: rates [0x60]: 44100 48000 bits [0xe]: 16 20 24 formats [0x1]: PCM Default Amp-In caps: N/A Default Amp-Out caps: N/A State of AFG node 0x01: Power states: D0 D1 D2 D3 D3cold CLKSTOP EPSS Power: setting=D0, actual=D0 GPIO: io=8, o=0, i=0, unsolicited=1, wake=0 IO[0]: enable=0, dir=0, wake=0, sticky=0, data=0, unsol=0 IO[1]: enable=0, dir=0, wake=0, sticky=0, data=0, unsol=0 IO[2]: enable=0, dir=0, wake=0, sticky=0, data=0, unsol=0 IO[3]: enable=0, dir=0, wake=0, sticky=0, data=0, unsol=0 IO[4]: enable=0, dir=0, wake=0, sticky=0, data=0, unsol=0 IO[5]: enable=0, dir=0, wake=0, sticky=0, data=0, unsol=0 IO[6]: enable=0, dir=0, wake=0, sticky=0, data=0, unsol=0 IO[7]: enable=0, dir=0, wake=0, sticky=0, data=0, unsol=0 Node 0x02 [Audio Output] wcaps 0x41d: Stereo Amp-Out Control: name="Headphone Playback Volume", index=0, device=0 ControlAmp: chs=3, dir=Out, idx=0, ofs=0 Device: name="ALC298 Analog", type="Audio", device=0 Amp-Out caps: ofs=0x7f, nsteps=0x7f, stepsize=0x01, mute=0 Amp-Out vals: [0x00 0x00] Converter: stream=1, channel=0 PCM: rates [0x60]: 44100 48000 bits [0xe]: 16 20 24 formats [0x1]: PCM Power states: D0 D1 D2 D3 EPSS Power: setting=D0, actual=D0 Node 0x03 [Audio Output] wcaps 0x41d: Stereo Amp-Out Control: name="Speaker Playback Volume", index=0, device=0 ControlAmp: chs=3, dir=Out, idx=0, ofs=0 Amp-Out caps: ofs=0x7f, nsteps=0x7f, stepsize=0x01, mute=0 Amp-Out vals: [0x7f 0x7f] Converter: stream=1, channel=0 ProblemType: Bug DistroRelease: Ubuntu 19.10 Package: alsa-base 1.0.25+dfsg-0ubuntu5 ProcVersionSignature: Ubuntu 5.3.0-19.20-generic 5.3.1 Uname: Linux 5.3.0-19-generic x86_64 ApportVersion: 2.20.11-0ubuntu8.2 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: martin 1383 F pulseaudio CurrentDesktop: ubuntu:GNOME Date: Wed Nov 6 06:20:08 2019 InstallationDate: Installed on 2019-11-03 (3 days ago) InstallationMedia: Ubuntu 19.10 "Eoan Ermine" - Release amd64 (20191017) PackageArchitecture: all ProcEnviron: TERM=xterm-256color PATH=(custom, no user) XDG_RUNTIME_DIR= LANG=en_US.UTF-8 SHELL=/bin/bash SourcePackage: alsa-driver S
[Touch-packages] [Bug 1851518] Re: [950SBE/951SBE, Realtek ALC298, Speaker, Internal] No sound on internal speakers, very very quiet on headphones
dmesg output attached from #21, step 2) ** Attachment added: "dmesg.txt" https://bugs.launchpad.net/ubuntu/+source/alsa-driver/+bug/1851518/+attachment/5305171/+files/dmesg.txt -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to alsa-driver in Ubuntu. https://bugs.launchpad.net/bugs/1851518 Title: [950SBE/951SBE, Realtek ALC298, Speaker, Internal] No sound on internal speakers, very very quiet on headphones Status in alsa-driver package in Ubuntu: New Bug description: I've been googling this issue for 10's of hours and tried many things. Relase of Ubuntu: 19.10 Expected outcome: Music plays on the internal speakers and headphones. Actual outcome: I can barely hear audio using headphones with volume turned up to 150%. Absolutely nothing comes out of the speakers. (The speakers sound great under Windows 10.) Complete alsa-info output is attached, but here are some snippets: !!DMI Information !!--- Manufacturer: SAMSUNG ELECTRONICS CO., LTD. Product Name: 950SBE/951SBE Product Version: P06RES Firmware Version: P06RES.075.190529.SP Board Vendor: SAMSUNG ELECTRONICS CO., LTD. Board Name:NP950SBE-K01US !!Kernel Information !!-- Kernel release:5.3.0-19-generic Operating System: GNU/Linux Architecture: x86_64 Processor: x86_64 SMP Enabled: Yes !!ALSA Version !! Driver version: k5.3.0-19-generic Library version:1.1.9 Utilities version: 1.1.9 !!Loaded ALSA modules !!--- snd_hda_intel !!Sound Servers on this system !! Pulseaudio: Installed - Yes (/usr/bin/pulseaudio) Running - Yes !!Soundcards recognised by ALSA !!- 0 [PCH]: HDA-Intel - HDA Intel PCH HDA Intel PCH at 0x604b118000 irq 177 !!PCI Soundcards installed in the system !!-- 00:1f.3 Multimedia audio controller: Intel Corporation Cannon Point-LP High Definition Audio Controller (rev 11) !!Advanced information - PCI Vendor/Device/Subsystem ID's !!--- 00:1f.3 0401: 8086:9dc8 (rev 11) DeviceName: Onboard - Sound !!HDA-Intel Codec information !!--- --startcollapse-- Codec: Realtek ALC298 Address: 0 AFG Function Id: 0x1 (unsol 1) Vendor Id: 0x10ec0298 Subsystem Id: 0x144dc812 Revision Id: 0x100103 No Modem Function Group found Default PCM: rates [0x60]: 44100 48000 bits [0xe]: 16 20 24 formats [0x1]: PCM Default Amp-In caps: N/A Default Amp-Out caps: N/A State of AFG node 0x01: Power states: D0 D1 D2 D3 D3cold CLKSTOP EPSS Power: setting=D0, actual=D0 GPIO: io=8, o=0, i=0, unsolicited=1, wake=0 IO[0]: enable=0, dir=0, wake=0, sticky=0, data=0, unsol=0 IO[1]: enable=0, dir=0, wake=0, sticky=0, data=0, unsol=0 IO[2]: enable=0, dir=0, wake=0, sticky=0, data=0, unsol=0 IO[3]: enable=0, dir=0, wake=0, sticky=0, data=0, unsol=0 IO[4]: enable=0, dir=0, wake=0, sticky=0, data=0, unsol=0 IO[5]: enable=0, dir=0, wake=0, sticky=0, data=0, unsol=0 IO[6]: enable=0, dir=0, wake=0, sticky=0, data=0, unsol=0 IO[7]: enable=0, dir=0, wake=0, sticky=0, data=0, unsol=0 Node 0x02 [Audio Output] wcaps 0x41d: Stereo Amp-Out Control: name="Headphone Playback Volume", index=0, device=0 ControlAmp: chs=3, dir=Out, idx=0, ofs=0 Device: name="ALC298 Analog", type="Audio", device=0 Amp-Out caps: ofs=0x7f, nsteps=0x7f, stepsize=0x01, mute=0 Amp-Out vals: [0x00 0x00] Converter: stream=1, channel=0 PCM: rates [0x60]: 44100 48000 bits [0xe]: 16 20 24 formats [0x1]: PCM Power states: D0 D1 D2 D3 EPSS Power: setting=D0, actual=D0 Node 0x03 [Audio Output] wcaps 0x41d: Stereo Amp-Out Control: name="Speaker Playback Volume", index=0, device=0 ControlAmp: chs=3, dir=Out, idx=0, ofs=0 Amp-Out caps: ofs=0x7f, nsteps=0x7f, stepsize=0x01, mute=0 Amp-Out vals: [0x7f 0x7f] Converter: stream=1, channel=0 ProblemType: Bug DistroRelease: Ubuntu 19.10 Package: alsa-base 1.0.25+dfsg-0ubuntu5 ProcVersionSignature: Ubuntu 5.3.0-19.20-generic 5.3.1 Uname: Linux 5.3.0-19-generic x86_64 ApportVersion: 2.20.11-0ubuntu8.2 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: martin 1383 F pulseaudio CurrentDesktop: ubuntu:GNOME Date: Wed Nov 6 06:20:08 2019 InstallationDate: Installed on 2019-11-03 (3 days ago) InstallationMedia: Ubuntu 19.10 "Eoan Ermine" - Release amd64 (20191017) PackageArchitecture: all ProcEnviron: TERM=xterm-256color PATH=(custom, no user) XDG_RUNTIME_DIR= LANG=en_US.UTF-8 SHELL=/bin
[Touch-packages] [Bug 1851518] Re: [950SBE/951SBE, Realtek ALC298, Speaker, Internal] No sound on internal speakers, very very quiet on headphones
Hi, 1) Steps: - Removed the option model= - Rebooted - turned off Secure Boot and booted with your test kernel. Result: No sound from speakers. Very very quiet headphones. 2) Steps: sudo set-coeff.sh sudo su echo 1 > /sys/module/snd_hda_codec/parameters/dump_coef Result: No sound from speakers. Very very quiet headphones. alsa-info is attached. Thanks, Martin ** Attachment added: "alsa-info-with-coefficients-after-set-coeff.txt" https://bugs.launchpad.net/ubuntu/+source/alsa-driver/+bug/1851518/+attachment/5305170/+files/alsa-info-with-coefficients-after-set-coeff.txt -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to alsa-driver in Ubuntu. https://bugs.launchpad.net/bugs/1851518 Title: [950SBE/951SBE, Realtek ALC298, Speaker, Internal] No sound on internal speakers, very very quiet on headphones Status in alsa-driver package in Ubuntu: New Bug description: I've been googling this issue for 10's of hours and tried many things. Relase of Ubuntu: 19.10 Expected outcome: Music plays on the internal speakers and headphones. Actual outcome: I can barely hear audio using headphones with volume turned up to 150%. Absolutely nothing comes out of the speakers. (The speakers sound great under Windows 10.) Complete alsa-info output is attached, but here are some snippets: !!DMI Information !!--- Manufacturer: SAMSUNG ELECTRONICS CO., LTD. Product Name: 950SBE/951SBE Product Version: P06RES Firmware Version: P06RES.075.190529.SP Board Vendor: SAMSUNG ELECTRONICS CO., LTD. Board Name:NP950SBE-K01US !!Kernel Information !!-- Kernel release:5.3.0-19-generic Operating System: GNU/Linux Architecture: x86_64 Processor: x86_64 SMP Enabled: Yes !!ALSA Version !! Driver version: k5.3.0-19-generic Library version:1.1.9 Utilities version: 1.1.9 !!Loaded ALSA modules !!--- snd_hda_intel !!Sound Servers on this system !! Pulseaudio: Installed - Yes (/usr/bin/pulseaudio) Running - Yes !!Soundcards recognised by ALSA !!- 0 [PCH]: HDA-Intel - HDA Intel PCH HDA Intel PCH at 0x604b118000 irq 177 !!PCI Soundcards installed in the system !!-- 00:1f.3 Multimedia audio controller: Intel Corporation Cannon Point-LP High Definition Audio Controller (rev 11) !!Advanced information - PCI Vendor/Device/Subsystem ID's !!--- 00:1f.3 0401: 8086:9dc8 (rev 11) DeviceName: Onboard - Sound !!HDA-Intel Codec information !!--- --startcollapse-- Codec: Realtek ALC298 Address: 0 AFG Function Id: 0x1 (unsol 1) Vendor Id: 0x10ec0298 Subsystem Id: 0x144dc812 Revision Id: 0x100103 No Modem Function Group found Default PCM: rates [0x60]: 44100 48000 bits [0xe]: 16 20 24 formats [0x1]: PCM Default Amp-In caps: N/A Default Amp-Out caps: N/A State of AFG node 0x01: Power states: D0 D1 D2 D3 D3cold CLKSTOP EPSS Power: setting=D0, actual=D0 GPIO: io=8, o=0, i=0, unsolicited=1, wake=0 IO[0]: enable=0, dir=0, wake=0, sticky=0, data=0, unsol=0 IO[1]: enable=0, dir=0, wake=0, sticky=0, data=0, unsol=0 IO[2]: enable=0, dir=0, wake=0, sticky=0, data=0, unsol=0 IO[3]: enable=0, dir=0, wake=0, sticky=0, data=0, unsol=0 IO[4]: enable=0, dir=0, wake=0, sticky=0, data=0, unsol=0 IO[5]: enable=0, dir=0, wake=0, sticky=0, data=0, unsol=0 IO[6]: enable=0, dir=0, wake=0, sticky=0, data=0, unsol=0 IO[7]: enable=0, dir=0, wake=0, sticky=0, data=0, unsol=0 Node 0x02 [Audio Output] wcaps 0x41d: Stereo Amp-Out Control: name="Headphone Playback Volume", index=0, device=0 ControlAmp: chs=3, dir=Out, idx=0, ofs=0 Device: name="ALC298 Analog", type="Audio", device=0 Amp-Out caps: ofs=0x7f, nsteps=0x7f, stepsize=0x01, mute=0 Amp-Out vals: [0x00 0x00] Converter: stream=1, channel=0 PCM: rates [0x60]: 44100 48000 bits [0xe]: 16 20 24 formats [0x1]: PCM Power states: D0 D1 D2 D3 EPSS Power: setting=D0, actual=D0 Node 0x03 [Audio Output] wcaps 0x41d: Stereo Amp-Out Control: name="Speaker Playback Volume", index=0, device=0 ControlAmp: chs=3, dir=Out, idx=0, ofs=0 Amp-Out caps: ofs=0x7f, nsteps=0x7f, stepsize=0x01, mute=0 Amp-Out vals: [0x7f 0x7f] Converter: stream=1, channel=0 ProblemType: Bug DistroRelease: Ubuntu 19.10 Package: alsa-base 1.0.25+dfsg-0ubuntu5 ProcVersionSignature: Ubuntu 5.3.0-19.20-generic 5.3.1 Uname: Linux 5.3.0-19-generic x86_64 ApportVersion: 2.20.11-0ubuntu8.2 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS
[Touch-packages] [Bug 1851518] Re: [950SBE/951SBE, Realtek ALC298, Speaker, Internal] No sound on internal speakers, very very quiet on headphones
Install the testing kernel and reboot, Couldn't boot after installing all 3 .deb's: error: /boot/vmlinuz-5.3.0.23.25+samsung-test-generic has invalid signature error: you need to load the kernel first Press any key to continue... -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to alsa-driver in Ubuntu. https://bugs.launchpad.net/bugs/1851518 Title: [950SBE/951SBE, Realtek ALC298, Speaker, Internal] No sound on internal speakers, very very quiet on headphones Status in alsa-driver package in Ubuntu: New Bug description: I've been googling this issue for 10's of hours and tried many things. Relase of Ubuntu: 19.10 Expected outcome: Music plays on the internal speakers and headphones. Actual outcome: I can barely hear audio using headphones with volume turned up to 150%. Absolutely nothing comes out of the speakers. (The speakers sound great under Windows 10.) Complete alsa-info output is attached, but here are some snippets: !!DMI Information !!--- Manufacturer: SAMSUNG ELECTRONICS CO., LTD. Product Name: 950SBE/951SBE Product Version: P06RES Firmware Version: P06RES.075.190529.SP Board Vendor: SAMSUNG ELECTRONICS CO., LTD. Board Name:NP950SBE-K01US !!Kernel Information !!-- Kernel release:5.3.0-19-generic Operating System: GNU/Linux Architecture: x86_64 Processor: x86_64 SMP Enabled: Yes !!ALSA Version !! Driver version: k5.3.0-19-generic Library version:1.1.9 Utilities version: 1.1.9 !!Loaded ALSA modules !!--- snd_hda_intel !!Sound Servers on this system !! Pulseaudio: Installed - Yes (/usr/bin/pulseaudio) Running - Yes !!Soundcards recognised by ALSA !!- 0 [PCH]: HDA-Intel - HDA Intel PCH HDA Intel PCH at 0x604b118000 irq 177 !!PCI Soundcards installed in the system !!-- 00:1f.3 Multimedia audio controller: Intel Corporation Cannon Point-LP High Definition Audio Controller (rev 11) !!Advanced information - PCI Vendor/Device/Subsystem ID's !!--- 00:1f.3 0401: 8086:9dc8 (rev 11) DeviceName: Onboard - Sound !!HDA-Intel Codec information !!--- --startcollapse-- Codec: Realtek ALC298 Address: 0 AFG Function Id: 0x1 (unsol 1) Vendor Id: 0x10ec0298 Subsystem Id: 0x144dc812 Revision Id: 0x100103 No Modem Function Group found Default PCM: rates [0x60]: 44100 48000 bits [0xe]: 16 20 24 formats [0x1]: PCM Default Amp-In caps: N/A Default Amp-Out caps: N/A State of AFG node 0x01: Power states: D0 D1 D2 D3 D3cold CLKSTOP EPSS Power: setting=D0, actual=D0 GPIO: io=8, o=0, i=0, unsolicited=1, wake=0 IO[0]: enable=0, dir=0, wake=0, sticky=0, data=0, unsol=0 IO[1]: enable=0, dir=0, wake=0, sticky=0, data=0, unsol=0 IO[2]: enable=0, dir=0, wake=0, sticky=0, data=0, unsol=0 IO[3]: enable=0, dir=0, wake=0, sticky=0, data=0, unsol=0 IO[4]: enable=0, dir=0, wake=0, sticky=0, data=0, unsol=0 IO[5]: enable=0, dir=0, wake=0, sticky=0, data=0, unsol=0 IO[6]: enable=0, dir=0, wake=0, sticky=0, data=0, unsol=0 IO[7]: enable=0, dir=0, wake=0, sticky=0, data=0, unsol=0 Node 0x02 [Audio Output] wcaps 0x41d: Stereo Amp-Out Control: name="Headphone Playback Volume", index=0, device=0 ControlAmp: chs=3, dir=Out, idx=0, ofs=0 Device: name="ALC298 Analog", type="Audio", device=0 Amp-Out caps: ofs=0x7f, nsteps=0x7f, stepsize=0x01, mute=0 Amp-Out vals: [0x00 0x00] Converter: stream=1, channel=0 PCM: rates [0x60]: 44100 48000 bits [0xe]: 16 20 24 formats [0x1]: PCM Power states: D0 D1 D2 D3 EPSS Power: setting=D0, actual=D0 Node 0x03 [Audio Output] wcaps 0x41d: Stereo Amp-Out Control: name="Speaker Playback Volume", index=0, device=0 ControlAmp: chs=3, dir=Out, idx=0, ofs=0 Amp-Out caps: ofs=0x7f, nsteps=0x7f, stepsize=0x01, mute=0 Amp-Out vals: [0x7f 0x7f] Converter: stream=1, channel=0 ProblemType: Bug DistroRelease: Ubuntu 19.10 Package: alsa-base 1.0.25+dfsg-0ubuntu5 ProcVersionSignature: Ubuntu 5.3.0-19.20-generic 5.3.1 Uname: Linux 5.3.0-19-generic x86_64 ApportVersion: 2.20.11-0ubuntu8.2 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: martin 1383 F pulseaudio CurrentDesktop: ubuntu:GNOME Date: Wed Nov 6 06:20:08 2019 InstallationDate: Installed on 2019-11-03 (3 days ago) InstallationMedia: Ubuntu 19.10 "Eoan Ermine" - Release amd64 (20191017) PackageArchitecture: all
[Touch-packages] [Bug 1851518] Re: [950SBE/951SBE, Realtek ALC298, Speaker, Internal] No sound on internal speakers, very very quiet on headphones
Please remove any modle= from alsa-base.conf Install the testing kernel and reboot, then test headphone and speaker with the testing kernel. https://people.canonical.com/~hwang4/samsung-test/ (to install the testing kernel, sudo dpkg -i linux-modules-xxx.deb; sudo dpkg -i linux-image-xxx.deb; sudo dpkg -i linux-modules-extra-.deb) If headphone and speaker still don't work, please run this script and retest the headphone and speaker again. then upload the dmesg and alsa-info.txt-with-coeff ** Attachment added: "set-coeff.sh" https://bugs.launchpad.net/ubuntu/+source/alsa-driver/+bug/1851518/+attachment/5305138/+files/set-coeff.sh -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to alsa-driver in Ubuntu. https://bugs.launchpad.net/bugs/1851518 Title: [950SBE/951SBE, Realtek ALC298, Speaker, Internal] No sound on internal speakers, very very quiet on headphones Status in alsa-driver package in Ubuntu: New Bug description: I've been googling this issue for 10's of hours and tried many things. Relase of Ubuntu: 19.10 Expected outcome: Music plays on the internal speakers and headphones. Actual outcome: I can barely hear audio using headphones with volume turned up to 150%. Absolutely nothing comes out of the speakers. (The speakers sound great under Windows 10.) Complete alsa-info output is attached, but here are some snippets: !!DMI Information !!--- Manufacturer: SAMSUNG ELECTRONICS CO., LTD. Product Name: 950SBE/951SBE Product Version: P06RES Firmware Version: P06RES.075.190529.SP Board Vendor: SAMSUNG ELECTRONICS CO., LTD. Board Name:NP950SBE-K01US !!Kernel Information !!-- Kernel release:5.3.0-19-generic Operating System: GNU/Linux Architecture: x86_64 Processor: x86_64 SMP Enabled: Yes !!ALSA Version !! Driver version: k5.3.0-19-generic Library version:1.1.9 Utilities version: 1.1.9 !!Loaded ALSA modules !!--- snd_hda_intel !!Sound Servers on this system !! Pulseaudio: Installed - Yes (/usr/bin/pulseaudio) Running - Yes !!Soundcards recognised by ALSA !!- 0 [PCH]: HDA-Intel - HDA Intel PCH HDA Intel PCH at 0x604b118000 irq 177 !!PCI Soundcards installed in the system !!-- 00:1f.3 Multimedia audio controller: Intel Corporation Cannon Point-LP High Definition Audio Controller (rev 11) !!Advanced information - PCI Vendor/Device/Subsystem ID's !!--- 00:1f.3 0401: 8086:9dc8 (rev 11) DeviceName: Onboard - Sound !!HDA-Intel Codec information !!--- --startcollapse-- Codec: Realtek ALC298 Address: 0 AFG Function Id: 0x1 (unsol 1) Vendor Id: 0x10ec0298 Subsystem Id: 0x144dc812 Revision Id: 0x100103 No Modem Function Group found Default PCM: rates [0x60]: 44100 48000 bits [0xe]: 16 20 24 formats [0x1]: PCM Default Amp-In caps: N/A Default Amp-Out caps: N/A State of AFG node 0x01: Power states: D0 D1 D2 D3 D3cold CLKSTOP EPSS Power: setting=D0, actual=D0 GPIO: io=8, o=0, i=0, unsolicited=1, wake=0 IO[0]: enable=0, dir=0, wake=0, sticky=0, data=0, unsol=0 IO[1]: enable=0, dir=0, wake=0, sticky=0, data=0, unsol=0 IO[2]: enable=0, dir=0, wake=0, sticky=0, data=0, unsol=0 IO[3]: enable=0, dir=0, wake=0, sticky=0, data=0, unsol=0 IO[4]: enable=0, dir=0, wake=0, sticky=0, data=0, unsol=0 IO[5]: enable=0, dir=0, wake=0, sticky=0, data=0, unsol=0 IO[6]: enable=0, dir=0, wake=0, sticky=0, data=0, unsol=0 IO[7]: enable=0, dir=0, wake=0, sticky=0, data=0, unsol=0 Node 0x02 [Audio Output] wcaps 0x41d: Stereo Amp-Out Control: name="Headphone Playback Volume", index=0, device=0 ControlAmp: chs=3, dir=Out, idx=0, ofs=0 Device: name="ALC298 Analog", type="Audio", device=0 Amp-Out caps: ofs=0x7f, nsteps=0x7f, stepsize=0x01, mute=0 Amp-Out vals: [0x00 0x00] Converter: stream=1, channel=0 PCM: rates [0x60]: 44100 48000 bits [0xe]: 16 20 24 formats [0x1]: PCM Power states: D0 D1 D2 D3 EPSS Power: setting=D0, actual=D0 Node 0x03 [Audio Output] wcaps 0x41d: Stereo Amp-Out Control: name="Speaker Playback Volume", index=0, device=0 ControlAmp: chs=3, dir=Out, idx=0, ofs=0 Amp-Out caps: ofs=0x7f, nsteps=0x7f, stepsize=0x01, mute=0 Amp-Out vals: [0x7f 0x7f] Converter: stream=1, channel=0 ProblemType: Bug DistroRelease: Ubuntu 19.10 Package: alsa-base 1.0.25+dfsg-0ubuntu5 ProcVersionSignature: Ubuntu 5.3.0-19.20-generic 5.3.1 Uname: Linux 5.3.0-19-generic x86_64 ApportVersion: 2.20.11-0ubuntu8.2
[Touch-packages] [Bug 1851518] Re: [950SBE/951SBE, Realtek ALC298, Speaker, Internal] No sound on internal speakers, very very quiet on headphones
Attachment to #17 was incorrect (forgot to turn on coefficients) Attached is alsa-info with coefficients. ** Attachment added: "alsa-info-dell-headset3-with-coefficients.txt" https://bugs.launchpad.net/ubuntu/+source/alsa-driver/+bug/1851518/+attachment/5304921/+files/alsa-info-dell-headset3-with-coefficients.txt -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to alsa-driver in Ubuntu. https://bugs.launchpad.net/bugs/1851518 Title: [950SBE/951SBE, Realtek ALC298, Speaker, Internal] No sound on internal speakers, very very quiet on headphones Status in alsa-driver package in Ubuntu: New Bug description: I've been googling this issue for 10's of hours and tried many things. Relase of Ubuntu: 19.10 Expected outcome: Music plays on the internal speakers and headphones. Actual outcome: I can barely hear audio using headphones with volume turned up to 150%. Absolutely nothing comes out of the speakers. (The speakers sound great under Windows 10.) Complete alsa-info output is attached, but here are some snippets: !!DMI Information !!--- Manufacturer: SAMSUNG ELECTRONICS CO., LTD. Product Name: 950SBE/951SBE Product Version: P06RES Firmware Version: P06RES.075.190529.SP Board Vendor: SAMSUNG ELECTRONICS CO., LTD. Board Name:NP950SBE-K01US !!Kernel Information !!-- Kernel release:5.3.0-19-generic Operating System: GNU/Linux Architecture: x86_64 Processor: x86_64 SMP Enabled: Yes !!ALSA Version !! Driver version: k5.3.0-19-generic Library version:1.1.9 Utilities version: 1.1.9 !!Loaded ALSA modules !!--- snd_hda_intel !!Sound Servers on this system !! Pulseaudio: Installed - Yes (/usr/bin/pulseaudio) Running - Yes !!Soundcards recognised by ALSA !!- 0 [PCH]: HDA-Intel - HDA Intel PCH HDA Intel PCH at 0x604b118000 irq 177 !!PCI Soundcards installed in the system !!-- 00:1f.3 Multimedia audio controller: Intel Corporation Cannon Point-LP High Definition Audio Controller (rev 11) !!Advanced information - PCI Vendor/Device/Subsystem ID's !!--- 00:1f.3 0401: 8086:9dc8 (rev 11) DeviceName: Onboard - Sound !!HDA-Intel Codec information !!--- --startcollapse-- Codec: Realtek ALC298 Address: 0 AFG Function Id: 0x1 (unsol 1) Vendor Id: 0x10ec0298 Subsystem Id: 0x144dc812 Revision Id: 0x100103 No Modem Function Group found Default PCM: rates [0x60]: 44100 48000 bits [0xe]: 16 20 24 formats [0x1]: PCM Default Amp-In caps: N/A Default Amp-Out caps: N/A State of AFG node 0x01: Power states: D0 D1 D2 D3 D3cold CLKSTOP EPSS Power: setting=D0, actual=D0 GPIO: io=8, o=0, i=0, unsolicited=1, wake=0 IO[0]: enable=0, dir=0, wake=0, sticky=0, data=0, unsol=0 IO[1]: enable=0, dir=0, wake=0, sticky=0, data=0, unsol=0 IO[2]: enable=0, dir=0, wake=0, sticky=0, data=0, unsol=0 IO[3]: enable=0, dir=0, wake=0, sticky=0, data=0, unsol=0 IO[4]: enable=0, dir=0, wake=0, sticky=0, data=0, unsol=0 IO[5]: enable=0, dir=0, wake=0, sticky=0, data=0, unsol=0 IO[6]: enable=0, dir=0, wake=0, sticky=0, data=0, unsol=0 IO[7]: enable=0, dir=0, wake=0, sticky=0, data=0, unsol=0 Node 0x02 [Audio Output] wcaps 0x41d: Stereo Amp-Out Control: name="Headphone Playback Volume", index=0, device=0 ControlAmp: chs=3, dir=Out, idx=0, ofs=0 Device: name="ALC298 Analog", type="Audio", device=0 Amp-Out caps: ofs=0x7f, nsteps=0x7f, stepsize=0x01, mute=0 Amp-Out vals: [0x00 0x00] Converter: stream=1, channel=0 PCM: rates [0x60]: 44100 48000 bits [0xe]: 16 20 24 formats [0x1]: PCM Power states: D0 D1 D2 D3 EPSS Power: setting=D0, actual=D0 Node 0x03 [Audio Output] wcaps 0x41d: Stereo Amp-Out Control: name="Speaker Playback Volume", index=0, device=0 ControlAmp: chs=3, dir=Out, idx=0, ofs=0 Amp-Out caps: ofs=0x7f, nsteps=0x7f, stepsize=0x01, mute=0 Amp-Out vals: [0x7f 0x7f] Converter: stream=1, channel=0 ProblemType: Bug DistroRelease: Ubuntu 19.10 Package: alsa-base 1.0.25+dfsg-0ubuntu5 ProcVersionSignature: Ubuntu 5.3.0-19.20-generic 5.3.1 Uname: Linux 5.3.0-19-generic x86_64 ApportVersion: 2.20.11-0ubuntu8.2 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: martin 1383 F pulseaudio CurrentDesktop: ubuntu:GNOME Date: Wed Nov 6 06:20:08 2019 InstallationDate: Installed on 2019-11-03 (3 days ago) InstallationMedia: Ubuntu 19.10 "Eoan Ermine" - Release amd64 (20191017) Pac
[Touch-packages] [Bug 1851518] Re: [950SBE/951SBE, Realtek ALC298, Speaker, Internal] No sound on internal speakers, very very quiet on headphones
>> nd If you have time, please redo the test of #10, after finishing all commands, please generate an alsa-info.txt-with-coeff, let us check if all those commands successfully executed. <<< Option: dell-headset3 Headphone works, and does not seem to change when any of the below settings are applied. alsa-info output attached; it was generated after the last command in the sequence. martin@martins-samsung:~$ sudo hda-verb /dev/snd/hwC0D0 0x20 SET_COEF_INDEX 0x8e nid = 0x20, verb = 0x500, param = 0x8e value = 0x0 martin@martins-samsung:~$ sudo hda-verb /dev/snd/hwC0D0 0x20 SET_PROC_COEF 0x20 nid = 0x20, verb = 0x400, param = 0x20 value = 0x0 NO change martin@martins-samsung:~$ sudo hda-verb /dev/snd/hwC0D0 0x20 SET_COEF_INDEX 0x19 nid = 0x20, verb = 0x500, param = 0x19 value = 0x0 martin@martins-samsung:~$ sudo hda-verb /dev/snd/hwC0D0 0x20 SET_PROC_COEF 0x317 nid = 0x20, verb = 0x400, param = 0x317 value = 0x0 NO change martin@martins-samsung:~$ sudo hda-verb /dev/snd/hwC0D0 0x20 SET_COEF_INDEX 0x67 nid = 0x20, verb = 0x500, param = 0x67 value = 0x0 martin@martins-samsung:~$ sudo hda-verb /dev/snd/hwC0D0 0x20 SET_PROC_COEF 0x1110 nid = 0x20, verb = 0x400, param = 0x1110 value = 0x0 NO change martin@martins-samsung:~$ sudo hda-verb /dev/snd/hwC0D0 0x20 SET_COEF_INDEX 0x4f nid = 0x20, verb = 0x500, param = 0x4f value = 0x0 martin@martins-samsung:~$ sudo hda-verb /dev/snd/hwC0D0 0x20 SET_PROC_COEF 0xc429 nid = 0x20, verb = 0x400, param = 0xc429 value = 0x0 NO change Thanks, Martin ** Attachment added: "alsa-info-dell-headset3-with-coefficients.txt" https://bugs.launchpad.net/ubuntu/+source/alsa-driver/+bug/1851518/+attachment/5304920/+files/alsa-info-dell-headset3-with-coefficients.txt -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to alsa-driver in Ubuntu. https://bugs.launchpad.net/bugs/1851518 Title: [950SBE/951SBE, Realtek ALC298, Speaker, Internal] No sound on internal speakers, very very quiet on headphones Status in alsa-driver package in Ubuntu: New Bug description: I've been googling this issue for 10's of hours and tried many things. Relase of Ubuntu: 19.10 Expected outcome: Music plays on the internal speakers and headphones. Actual outcome: I can barely hear audio using headphones with volume turned up to 150%. Absolutely nothing comes out of the speakers. (The speakers sound great under Windows 10.) Complete alsa-info output is attached, but here are some snippets: !!DMI Information !!--- Manufacturer: SAMSUNG ELECTRONICS CO., LTD. Product Name: 950SBE/951SBE Product Version: P06RES Firmware Version: P06RES.075.190529.SP Board Vendor: SAMSUNG ELECTRONICS CO., LTD. Board Name:NP950SBE-K01US !!Kernel Information !!-- Kernel release:5.3.0-19-generic Operating System: GNU/Linux Architecture: x86_64 Processor: x86_64 SMP Enabled: Yes !!ALSA Version !! Driver version: k5.3.0-19-generic Library version:1.1.9 Utilities version: 1.1.9 !!Loaded ALSA modules !!--- snd_hda_intel !!Sound Servers on this system !! Pulseaudio: Installed - Yes (/usr/bin/pulseaudio) Running - Yes !!Soundcards recognised by ALSA !!- 0 [PCH]: HDA-Intel - HDA Intel PCH HDA Intel PCH at 0x604b118000 irq 177 !!PCI Soundcards installed in the system !!-- 00:1f.3 Multimedia audio controller: Intel Corporation Cannon Point-LP High Definition Audio Controller (rev 11) !!Advanced information - PCI Vendor/Device/Subsystem ID's !!--- 00:1f.3 0401: 8086:9dc8 (rev 11) DeviceName: Onboard - Sound !!HDA-Intel Codec information !!--- --startcollapse-- Codec: Realtek ALC298 Address: 0 AFG Function Id: 0x1 (unsol 1) Vendor Id: 0x10ec0298 Subsystem Id: 0x144dc812 Revision Id: 0x100103 No Modem Function Group found Default PCM: rates [0x60]: 44100 48000 bits [0xe]: 16 20 24 formats [0x1]: PCM Default Amp-In caps: N/A Default Amp-Out caps: N/A State of AFG node 0x01: Power states: D0 D1 D2 D3 D3cold CLKSTOP EPSS Power: setting=D0, actual=D0 GPIO: io=8, o=0, i=0, unsolicited=1, wake=0 IO[0]: enable=0, dir=0, wake=0, sticky=0, data=0, unsol=0 IO[1]: enable=0, dir=0, wake=0, sticky=0, data=0, unsol=0 IO[2]: enable=0, dir=0, wake=0, sticky=0, data=0, unsol=0 IO[3]: enable=0, dir=0, wake=0, sticky=0, data=0, unsol=0 IO[4]: enable=0, dir=0, wake=0, sticky=0, data=0, unsol=0 IO[5]: enable=0, dir=0, wake=0, stick
[Touch-packages] [Bug 1851518] Re: [950SBE/951SBE, Realtek ALC298, Speaker, Internal] No sound on internal speakers, very very quiet on headphones
> please verify that both speaker and headphone work well under windows, then using this tool to collect a log under windows, the log is a useful reference for linux. < Output attached; looks like this might be helpful to get the speakers to work. Thank you, Martin ** Attachment added: "RtHDDump.txt" https://bugs.launchpad.net/ubuntu/+source/alsa-driver/+bug/1851518/+attachment/5304916/+files/RtHDDump.txt -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to alsa-driver in Ubuntu. https://bugs.launchpad.net/bugs/1851518 Title: [950SBE/951SBE, Realtek ALC298, Speaker, Internal] No sound on internal speakers, very very quiet on headphones Status in alsa-driver package in Ubuntu: New Bug description: I've been googling this issue for 10's of hours and tried many things. Relase of Ubuntu: 19.10 Expected outcome: Music plays on the internal speakers and headphones. Actual outcome: I can barely hear audio using headphones with volume turned up to 150%. Absolutely nothing comes out of the speakers. (The speakers sound great under Windows 10.) Complete alsa-info output is attached, but here are some snippets: !!DMI Information !!--- Manufacturer: SAMSUNG ELECTRONICS CO., LTD. Product Name: 950SBE/951SBE Product Version: P06RES Firmware Version: P06RES.075.190529.SP Board Vendor: SAMSUNG ELECTRONICS CO., LTD. Board Name:NP950SBE-K01US !!Kernel Information !!-- Kernel release:5.3.0-19-generic Operating System: GNU/Linux Architecture: x86_64 Processor: x86_64 SMP Enabled: Yes !!ALSA Version !! Driver version: k5.3.0-19-generic Library version:1.1.9 Utilities version: 1.1.9 !!Loaded ALSA modules !!--- snd_hda_intel !!Sound Servers on this system !! Pulseaudio: Installed - Yes (/usr/bin/pulseaudio) Running - Yes !!Soundcards recognised by ALSA !!- 0 [PCH]: HDA-Intel - HDA Intel PCH HDA Intel PCH at 0x604b118000 irq 177 !!PCI Soundcards installed in the system !!-- 00:1f.3 Multimedia audio controller: Intel Corporation Cannon Point-LP High Definition Audio Controller (rev 11) !!Advanced information - PCI Vendor/Device/Subsystem ID's !!--- 00:1f.3 0401: 8086:9dc8 (rev 11) DeviceName: Onboard - Sound !!HDA-Intel Codec information !!--- --startcollapse-- Codec: Realtek ALC298 Address: 0 AFG Function Id: 0x1 (unsol 1) Vendor Id: 0x10ec0298 Subsystem Id: 0x144dc812 Revision Id: 0x100103 No Modem Function Group found Default PCM: rates [0x60]: 44100 48000 bits [0xe]: 16 20 24 formats [0x1]: PCM Default Amp-In caps: N/A Default Amp-Out caps: N/A State of AFG node 0x01: Power states: D0 D1 D2 D3 D3cold CLKSTOP EPSS Power: setting=D0, actual=D0 GPIO: io=8, o=0, i=0, unsolicited=1, wake=0 IO[0]: enable=0, dir=0, wake=0, sticky=0, data=0, unsol=0 IO[1]: enable=0, dir=0, wake=0, sticky=0, data=0, unsol=0 IO[2]: enable=0, dir=0, wake=0, sticky=0, data=0, unsol=0 IO[3]: enable=0, dir=0, wake=0, sticky=0, data=0, unsol=0 IO[4]: enable=0, dir=0, wake=0, sticky=0, data=0, unsol=0 IO[5]: enable=0, dir=0, wake=0, sticky=0, data=0, unsol=0 IO[6]: enable=0, dir=0, wake=0, sticky=0, data=0, unsol=0 IO[7]: enable=0, dir=0, wake=0, sticky=0, data=0, unsol=0 Node 0x02 [Audio Output] wcaps 0x41d: Stereo Amp-Out Control: name="Headphone Playback Volume", index=0, device=0 ControlAmp: chs=3, dir=Out, idx=0, ofs=0 Device: name="ALC298 Analog", type="Audio", device=0 Amp-Out caps: ofs=0x7f, nsteps=0x7f, stepsize=0x01, mute=0 Amp-Out vals: [0x00 0x00] Converter: stream=1, channel=0 PCM: rates [0x60]: 44100 48000 bits [0xe]: 16 20 24 formats [0x1]: PCM Power states: D0 D1 D2 D3 EPSS Power: setting=D0, actual=D0 Node 0x03 [Audio Output] wcaps 0x41d: Stereo Amp-Out Control: name="Speaker Playback Volume", index=0, device=0 ControlAmp: chs=3, dir=Out, idx=0, ofs=0 Amp-Out caps: ofs=0x7f, nsteps=0x7f, stepsize=0x01, mute=0 Amp-Out vals: [0x7f 0x7f] Converter: stream=1, channel=0 ProblemType: Bug DistroRelease: Ubuntu 19.10 Package: alsa-base 1.0.25+dfsg-0ubuntu5 ProcVersionSignature: Ubuntu 5.3.0-19.20-generic 5.3.1 Uname: Linux 5.3.0-19-generic x86_64 ApportVersion: 2.20.11-0ubuntu8.2 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: martin 1383 F pulseaudio CurrentDesktop: ubuntu:GNOME Date: Wed Nov 6 06:20:08 2019
[Touch-packages] [Bug 1851518] Re: [950SBE/951SBE, Realtek ALC298, Speaker, Internal] No sound on internal speakers, very very quiet on headphones
If you have time, please run #13 on the windows10. And If you have time, please redo the test of #10, after finishing all commands, please generate an alsa-info.txt-with-coeff, let us check if all those commands successfully executed. -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to alsa-driver in Ubuntu. https://bugs.launchpad.net/bugs/1851518 Title: [950SBE/951SBE, Realtek ALC298, Speaker, Internal] No sound on internal speakers, very very quiet on headphones Status in alsa-driver package in Ubuntu: New Bug description: I've been googling this issue for 10's of hours and tried many things. Relase of Ubuntu: 19.10 Expected outcome: Music plays on the internal speakers and headphones. Actual outcome: I can barely hear audio using headphones with volume turned up to 150%. Absolutely nothing comes out of the speakers. (The speakers sound great under Windows 10.) Complete alsa-info output is attached, but here are some snippets: !!DMI Information !!--- Manufacturer: SAMSUNG ELECTRONICS CO., LTD. Product Name: 950SBE/951SBE Product Version: P06RES Firmware Version: P06RES.075.190529.SP Board Vendor: SAMSUNG ELECTRONICS CO., LTD. Board Name:NP950SBE-K01US !!Kernel Information !!-- Kernel release:5.3.0-19-generic Operating System: GNU/Linux Architecture: x86_64 Processor: x86_64 SMP Enabled: Yes !!ALSA Version !! Driver version: k5.3.0-19-generic Library version:1.1.9 Utilities version: 1.1.9 !!Loaded ALSA modules !!--- snd_hda_intel !!Sound Servers on this system !! Pulseaudio: Installed - Yes (/usr/bin/pulseaudio) Running - Yes !!Soundcards recognised by ALSA !!- 0 [PCH]: HDA-Intel - HDA Intel PCH HDA Intel PCH at 0x604b118000 irq 177 !!PCI Soundcards installed in the system !!-- 00:1f.3 Multimedia audio controller: Intel Corporation Cannon Point-LP High Definition Audio Controller (rev 11) !!Advanced information - PCI Vendor/Device/Subsystem ID's !!--- 00:1f.3 0401: 8086:9dc8 (rev 11) DeviceName: Onboard - Sound !!HDA-Intel Codec information !!--- --startcollapse-- Codec: Realtek ALC298 Address: 0 AFG Function Id: 0x1 (unsol 1) Vendor Id: 0x10ec0298 Subsystem Id: 0x144dc812 Revision Id: 0x100103 No Modem Function Group found Default PCM: rates [0x60]: 44100 48000 bits [0xe]: 16 20 24 formats [0x1]: PCM Default Amp-In caps: N/A Default Amp-Out caps: N/A State of AFG node 0x01: Power states: D0 D1 D2 D3 D3cold CLKSTOP EPSS Power: setting=D0, actual=D0 GPIO: io=8, o=0, i=0, unsolicited=1, wake=0 IO[0]: enable=0, dir=0, wake=0, sticky=0, data=0, unsol=0 IO[1]: enable=0, dir=0, wake=0, sticky=0, data=0, unsol=0 IO[2]: enable=0, dir=0, wake=0, sticky=0, data=0, unsol=0 IO[3]: enable=0, dir=0, wake=0, sticky=0, data=0, unsol=0 IO[4]: enable=0, dir=0, wake=0, sticky=0, data=0, unsol=0 IO[5]: enable=0, dir=0, wake=0, sticky=0, data=0, unsol=0 IO[6]: enable=0, dir=0, wake=0, sticky=0, data=0, unsol=0 IO[7]: enable=0, dir=0, wake=0, sticky=0, data=0, unsol=0 Node 0x02 [Audio Output] wcaps 0x41d: Stereo Amp-Out Control: name="Headphone Playback Volume", index=0, device=0 ControlAmp: chs=3, dir=Out, idx=0, ofs=0 Device: name="ALC298 Analog", type="Audio", device=0 Amp-Out caps: ofs=0x7f, nsteps=0x7f, stepsize=0x01, mute=0 Amp-Out vals: [0x00 0x00] Converter: stream=1, channel=0 PCM: rates [0x60]: 44100 48000 bits [0xe]: 16 20 24 formats [0x1]: PCM Power states: D0 D1 D2 D3 EPSS Power: setting=D0, actual=D0 Node 0x03 [Audio Output] wcaps 0x41d: Stereo Amp-Out Control: name="Speaker Playback Volume", index=0, device=0 ControlAmp: chs=3, dir=Out, idx=0, ofs=0 Amp-Out caps: ofs=0x7f, nsteps=0x7f, stepsize=0x01, mute=0 Amp-Out vals: [0x7f 0x7f] Converter: stream=1, channel=0 ProblemType: Bug DistroRelease: Ubuntu 19.10 Package: alsa-base 1.0.25+dfsg-0ubuntu5 ProcVersionSignature: Ubuntu 5.3.0-19.20-generic 5.3.1 Uname: Linux 5.3.0-19-generic x86_64 ApportVersion: 2.20.11-0ubuntu8.2 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: martin 1383 F pulseaudio CurrentDesktop: ubuntu:GNOME Date: Wed Nov 6 06:20:08 2019 InstallationDate: Installed on 2019-11-03 (3 days ago) InstallationMedia: Ubuntu 19.10 "Eoan Ermine" - Release amd64 (20191017) PackageArchitecture: all ProcEnviron: TERM=xterm-256color PATH=(custom, no user)
[Touch-packages] [Bug 1851518] Re: [950SBE/951SBE, Realtek ALC298, Speaker, Internal] No sound on internal speakers, very very quiet on headphones
<<< Ah, please test model=dell-headset3, it should work. And please also add options snd-hda-codec-realtek dyndbg, then boot the system without the headphone plugged. after boot up, plug headphone, and test if it works well. If it works well, please upload the dmesg. Yes, headphones work well. dmesg output is attached. Thank you. ** Attachment added: "dmesg.txt" https://bugs.launchpad.net/ubuntu/+source/alsa-driver/+bug/1851518/+attachment/5304905/+files/dmesg.txt -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to alsa-driver in Ubuntu. https://bugs.launchpad.net/bugs/1851518 Title: [950SBE/951SBE, Realtek ALC298, Speaker, Internal] No sound on internal speakers, very very quiet on headphones Status in alsa-driver package in Ubuntu: New Bug description: I've been googling this issue for 10's of hours and tried many things. Relase of Ubuntu: 19.10 Expected outcome: Music plays on the internal speakers and headphones. Actual outcome: I can barely hear audio using headphones with volume turned up to 150%. Absolutely nothing comes out of the speakers. (The speakers sound great under Windows 10.) Complete alsa-info output is attached, but here are some snippets: !!DMI Information !!--- Manufacturer: SAMSUNG ELECTRONICS CO., LTD. Product Name: 950SBE/951SBE Product Version: P06RES Firmware Version: P06RES.075.190529.SP Board Vendor: SAMSUNG ELECTRONICS CO., LTD. Board Name:NP950SBE-K01US !!Kernel Information !!-- Kernel release:5.3.0-19-generic Operating System: GNU/Linux Architecture: x86_64 Processor: x86_64 SMP Enabled: Yes !!ALSA Version !! Driver version: k5.3.0-19-generic Library version:1.1.9 Utilities version: 1.1.9 !!Loaded ALSA modules !!--- snd_hda_intel !!Sound Servers on this system !! Pulseaudio: Installed - Yes (/usr/bin/pulseaudio) Running - Yes !!Soundcards recognised by ALSA !!- 0 [PCH]: HDA-Intel - HDA Intel PCH HDA Intel PCH at 0x604b118000 irq 177 !!PCI Soundcards installed in the system !!-- 00:1f.3 Multimedia audio controller: Intel Corporation Cannon Point-LP High Definition Audio Controller (rev 11) !!Advanced information - PCI Vendor/Device/Subsystem ID's !!--- 00:1f.3 0401: 8086:9dc8 (rev 11) DeviceName: Onboard - Sound !!HDA-Intel Codec information !!--- --startcollapse-- Codec: Realtek ALC298 Address: 0 AFG Function Id: 0x1 (unsol 1) Vendor Id: 0x10ec0298 Subsystem Id: 0x144dc812 Revision Id: 0x100103 No Modem Function Group found Default PCM: rates [0x60]: 44100 48000 bits [0xe]: 16 20 24 formats [0x1]: PCM Default Amp-In caps: N/A Default Amp-Out caps: N/A State of AFG node 0x01: Power states: D0 D1 D2 D3 D3cold CLKSTOP EPSS Power: setting=D0, actual=D0 GPIO: io=8, o=0, i=0, unsolicited=1, wake=0 IO[0]: enable=0, dir=0, wake=0, sticky=0, data=0, unsol=0 IO[1]: enable=0, dir=0, wake=0, sticky=0, data=0, unsol=0 IO[2]: enable=0, dir=0, wake=0, sticky=0, data=0, unsol=0 IO[3]: enable=0, dir=0, wake=0, sticky=0, data=0, unsol=0 IO[4]: enable=0, dir=0, wake=0, sticky=0, data=0, unsol=0 IO[5]: enable=0, dir=0, wake=0, sticky=0, data=0, unsol=0 IO[6]: enable=0, dir=0, wake=0, sticky=0, data=0, unsol=0 IO[7]: enable=0, dir=0, wake=0, sticky=0, data=0, unsol=0 Node 0x02 [Audio Output] wcaps 0x41d: Stereo Amp-Out Control: name="Headphone Playback Volume", index=0, device=0 ControlAmp: chs=3, dir=Out, idx=0, ofs=0 Device: name="ALC298 Analog", type="Audio", device=0 Amp-Out caps: ofs=0x7f, nsteps=0x7f, stepsize=0x01, mute=0 Amp-Out vals: [0x00 0x00] Converter: stream=1, channel=0 PCM: rates [0x60]: 44100 48000 bits [0xe]: 16 20 24 formats [0x1]: PCM Power states: D0 D1 D2 D3 EPSS Power: setting=D0, actual=D0 Node 0x03 [Audio Output] wcaps 0x41d: Stereo Amp-Out Control: name="Speaker Playback Volume", index=0, device=0 ControlAmp: chs=3, dir=Out, idx=0, ofs=0 Amp-Out caps: ofs=0x7f, nsteps=0x7f, stepsize=0x01, mute=0 Amp-Out vals: [0x7f 0x7f] Converter: stream=1, channel=0 ProblemType: Bug DistroRelease: Ubuntu 19.10 Package: alsa-base 1.0.25+dfsg-0ubuntu5 ProcVersionSignature: Ubuntu 5.3.0-19.20-generic 5.3.1 Uname: Linux 5.3.0-19-generic x86_64 ApportVersion: 2.20.11-0ubuntu8.2 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: martin 1383 F pulseaudio Curr
[Touch-packages] [Bug 1851518] Re: [950SBE/951SBE, Realtek ALC298, Speaker, Internal] No sound on internal speakers, very very quiet on headphones
Ah, please test model=dell-headset3, it should work. And please also add options snd-hda-codec-realtek dyndbg, then boot the system without the headphone plugged. after boot up, plug headphone, and test if it works well. If it works well, please upload the dmesg. thx. -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to alsa-driver in Ubuntu. https://bugs.launchpad.net/bugs/1851518 Title: [950SBE/951SBE, Realtek ALC298, Speaker, Internal] No sound on internal speakers, very very quiet on headphones Status in alsa-driver package in Ubuntu: New Bug description: I've been googling this issue for 10's of hours and tried many things. Relase of Ubuntu: 19.10 Expected outcome: Music plays on the internal speakers and headphones. Actual outcome: I can barely hear audio using headphones with volume turned up to 150%. Absolutely nothing comes out of the speakers. (The speakers sound great under Windows 10.) Complete alsa-info output is attached, but here are some snippets: !!DMI Information !!--- Manufacturer: SAMSUNG ELECTRONICS CO., LTD. Product Name: 950SBE/951SBE Product Version: P06RES Firmware Version: P06RES.075.190529.SP Board Vendor: SAMSUNG ELECTRONICS CO., LTD. Board Name:NP950SBE-K01US !!Kernel Information !!-- Kernel release:5.3.0-19-generic Operating System: GNU/Linux Architecture: x86_64 Processor: x86_64 SMP Enabled: Yes !!ALSA Version !! Driver version: k5.3.0-19-generic Library version:1.1.9 Utilities version: 1.1.9 !!Loaded ALSA modules !!--- snd_hda_intel !!Sound Servers on this system !! Pulseaudio: Installed - Yes (/usr/bin/pulseaudio) Running - Yes !!Soundcards recognised by ALSA !!- 0 [PCH]: HDA-Intel - HDA Intel PCH HDA Intel PCH at 0x604b118000 irq 177 !!PCI Soundcards installed in the system !!-- 00:1f.3 Multimedia audio controller: Intel Corporation Cannon Point-LP High Definition Audio Controller (rev 11) !!Advanced information - PCI Vendor/Device/Subsystem ID's !!--- 00:1f.3 0401: 8086:9dc8 (rev 11) DeviceName: Onboard - Sound !!HDA-Intel Codec information !!--- --startcollapse-- Codec: Realtek ALC298 Address: 0 AFG Function Id: 0x1 (unsol 1) Vendor Id: 0x10ec0298 Subsystem Id: 0x144dc812 Revision Id: 0x100103 No Modem Function Group found Default PCM: rates [0x60]: 44100 48000 bits [0xe]: 16 20 24 formats [0x1]: PCM Default Amp-In caps: N/A Default Amp-Out caps: N/A State of AFG node 0x01: Power states: D0 D1 D2 D3 D3cold CLKSTOP EPSS Power: setting=D0, actual=D0 GPIO: io=8, o=0, i=0, unsolicited=1, wake=0 IO[0]: enable=0, dir=0, wake=0, sticky=0, data=0, unsol=0 IO[1]: enable=0, dir=0, wake=0, sticky=0, data=0, unsol=0 IO[2]: enable=0, dir=0, wake=0, sticky=0, data=0, unsol=0 IO[3]: enable=0, dir=0, wake=0, sticky=0, data=0, unsol=0 IO[4]: enable=0, dir=0, wake=0, sticky=0, data=0, unsol=0 IO[5]: enable=0, dir=0, wake=0, sticky=0, data=0, unsol=0 IO[6]: enable=0, dir=0, wake=0, sticky=0, data=0, unsol=0 IO[7]: enable=0, dir=0, wake=0, sticky=0, data=0, unsol=0 Node 0x02 [Audio Output] wcaps 0x41d: Stereo Amp-Out Control: name="Headphone Playback Volume", index=0, device=0 ControlAmp: chs=3, dir=Out, idx=0, ofs=0 Device: name="ALC298 Analog", type="Audio", device=0 Amp-Out caps: ofs=0x7f, nsteps=0x7f, stepsize=0x01, mute=0 Amp-Out vals: [0x00 0x00] Converter: stream=1, channel=0 PCM: rates [0x60]: 44100 48000 bits [0xe]: 16 20 24 formats [0x1]: PCM Power states: D0 D1 D2 D3 EPSS Power: setting=D0, actual=D0 Node 0x03 [Audio Output] wcaps 0x41d: Stereo Amp-Out Control: name="Speaker Playback Volume", index=0, device=0 ControlAmp: chs=3, dir=Out, idx=0, ofs=0 Amp-Out caps: ofs=0x7f, nsteps=0x7f, stepsize=0x01, mute=0 Amp-Out vals: [0x7f 0x7f] Converter: stream=1, channel=0 ProblemType: Bug DistroRelease: Ubuntu 19.10 Package: alsa-base 1.0.25+dfsg-0ubuntu5 ProcVersionSignature: Ubuntu 5.3.0-19.20-generic 5.3.1 Uname: Linux 5.3.0-19-generic x86_64 ApportVersion: 2.20.11-0ubuntu8.2 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: martin 1383 F pulseaudio CurrentDesktop: ubuntu:GNOME Date: Wed Nov 6 06:20:08 2019 InstallationDate: Installed on 2019-11-03 (3 days ago) InstallationMedia: Ubuntu 19.10 "Eoan Ermine" - Release amd64 (20191017) PackageArchitecture: all ProcEnviron: TERM=xterm
[Touch-packages] [Bug 1851518] Re: [950SBE/951SBE, Realtek ALC298, Speaker, Internal] No sound on internal speakers, very very quiet on headphones
And for speaker's issue, please verify that both speaker and headphone work well under windows, then using this tool to collect a log under windows, the log is a useful reference for linux. thx. ** Attachment added: "RtHDDump_V236.zip" https://bugs.launchpad.net/ubuntu/+source/alsa-driver/+bug/1851518/+attachment/5304811/+files/RtHDDump_V236.zip -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to alsa-driver in Ubuntu. https://bugs.launchpad.net/bugs/1851518 Title: [950SBE/951SBE, Realtek ALC298, Speaker, Internal] No sound on internal speakers, very very quiet on headphones Status in alsa-driver package in Ubuntu: New Bug description: I've been googling this issue for 10's of hours and tried many things. Relase of Ubuntu: 19.10 Expected outcome: Music plays on the internal speakers and headphones. Actual outcome: I can barely hear audio using headphones with volume turned up to 150%. Absolutely nothing comes out of the speakers. (The speakers sound great under Windows 10.) Complete alsa-info output is attached, but here are some snippets: !!DMI Information !!--- Manufacturer: SAMSUNG ELECTRONICS CO., LTD. Product Name: 950SBE/951SBE Product Version: P06RES Firmware Version: P06RES.075.190529.SP Board Vendor: SAMSUNG ELECTRONICS CO., LTD. Board Name:NP950SBE-K01US !!Kernel Information !!-- Kernel release:5.3.0-19-generic Operating System: GNU/Linux Architecture: x86_64 Processor: x86_64 SMP Enabled: Yes !!ALSA Version !! Driver version: k5.3.0-19-generic Library version:1.1.9 Utilities version: 1.1.9 !!Loaded ALSA modules !!--- snd_hda_intel !!Sound Servers on this system !! Pulseaudio: Installed - Yes (/usr/bin/pulseaudio) Running - Yes !!Soundcards recognised by ALSA !!- 0 [PCH]: HDA-Intel - HDA Intel PCH HDA Intel PCH at 0x604b118000 irq 177 !!PCI Soundcards installed in the system !!-- 00:1f.3 Multimedia audio controller: Intel Corporation Cannon Point-LP High Definition Audio Controller (rev 11) !!Advanced information - PCI Vendor/Device/Subsystem ID's !!--- 00:1f.3 0401: 8086:9dc8 (rev 11) DeviceName: Onboard - Sound !!HDA-Intel Codec information !!--- --startcollapse-- Codec: Realtek ALC298 Address: 0 AFG Function Id: 0x1 (unsol 1) Vendor Id: 0x10ec0298 Subsystem Id: 0x144dc812 Revision Id: 0x100103 No Modem Function Group found Default PCM: rates [0x60]: 44100 48000 bits [0xe]: 16 20 24 formats [0x1]: PCM Default Amp-In caps: N/A Default Amp-Out caps: N/A State of AFG node 0x01: Power states: D0 D1 D2 D3 D3cold CLKSTOP EPSS Power: setting=D0, actual=D0 GPIO: io=8, o=0, i=0, unsolicited=1, wake=0 IO[0]: enable=0, dir=0, wake=0, sticky=0, data=0, unsol=0 IO[1]: enable=0, dir=0, wake=0, sticky=0, data=0, unsol=0 IO[2]: enable=0, dir=0, wake=0, sticky=0, data=0, unsol=0 IO[3]: enable=0, dir=0, wake=0, sticky=0, data=0, unsol=0 IO[4]: enable=0, dir=0, wake=0, sticky=0, data=0, unsol=0 IO[5]: enable=0, dir=0, wake=0, sticky=0, data=0, unsol=0 IO[6]: enable=0, dir=0, wake=0, sticky=0, data=0, unsol=0 IO[7]: enable=0, dir=0, wake=0, sticky=0, data=0, unsol=0 Node 0x02 [Audio Output] wcaps 0x41d: Stereo Amp-Out Control: name="Headphone Playback Volume", index=0, device=0 ControlAmp: chs=3, dir=Out, idx=0, ofs=0 Device: name="ALC298 Analog", type="Audio", device=0 Amp-Out caps: ofs=0x7f, nsteps=0x7f, stepsize=0x01, mute=0 Amp-Out vals: [0x00 0x00] Converter: stream=1, channel=0 PCM: rates [0x60]: 44100 48000 bits [0xe]: 16 20 24 formats [0x1]: PCM Power states: D0 D1 D2 D3 EPSS Power: setting=D0, actual=D0 Node 0x03 [Audio Output] wcaps 0x41d: Stereo Amp-Out Control: name="Speaker Playback Volume", index=0, device=0 ControlAmp: chs=3, dir=Out, idx=0, ofs=0 Amp-Out caps: ofs=0x7f, nsteps=0x7f, stepsize=0x01, mute=0 Amp-Out vals: [0x7f 0x7f] Converter: stream=1, channel=0 ProblemType: Bug DistroRelease: Ubuntu 19.10 Package: alsa-base 1.0.25+dfsg-0ubuntu5 ProcVersionSignature: Ubuntu 5.3.0-19.20-generic 5.3.1 Uname: Linux 5.3.0-19-generic x86_64 ApportVersion: 2.20.11-0ubuntu8.2 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: martin 1383 F pulseaudio CurrentDesktop: ubuntu:GNOME Date: Wed Nov 6 06:20:08 2019 InstallationDate: Installed on 2019-11-03 (3 days ago) InstallationMedia: Ubuntu 19.10 "Eoan Ermine
[Touch-packages] [Bug 1851518] Re: [950SBE/951SBE, Realtek ALC298, Speaker, Internal] No sound on internal speakers, very very quiet on headphones
FYI: I just re-tested with model=mono-speakers, and there the headhpone output likewise does not change for any of the above settings: it works great the entire time. Thanks, Martin -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to alsa-driver in Ubuntu. https://bugs.launchpad.net/bugs/1851518 Title: [950SBE/951SBE, Realtek ALC298, Speaker, Internal] No sound on internal speakers, very very quiet on headphones Status in alsa-driver package in Ubuntu: New Bug description: I've been googling this issue for 10's of hours and tried many things. Relase of Ubuntu: 19.10 Expected outcome: Music plays on the internal speakers and headphones. Actual outcome: I can barely hear audio using headphones with volume turned up to 150%. Absolutely nothing comes out of the speakers. (The speakers sound great under Windows 10.) Complete alsa-info output is attached, but here are some snippets: !!DMI Information !!--- Manufacturer: SAMSUNG ELECTRONICS CO., LTD. Product Name: 950SBE/951SBE Product Version: P06RES Firmware Version: P06RES.075.190529.SP Board Vendor: SAMSUNG ELECTRONICS CO., LTD. Board Name:NP950SBE-K01US !!Kernel Information !!-- Kernel release:5.3.0-19-generic Operating System: GNU/Linux Architecture: x86_64 Processor: x86_64 SMP Enabled: Yes !!ALSA Version !! Driver version: k5.3.0-19-generic Library version:1.1.9 Utilities version: 1.1.9 !!Loaded ALSA modules !!--- snd_hda_intel !!Sound Servers on this system !! Pulseaudio: Installed - Yes (/usr/bin/pulseaudio) Running - Yes !!Soundcards recognised by ALSA !!- 0 [PCH]: HDA-Intel - HDA Intel PCH HDA Intel PCH at 0x604b118000 irq 177 !!PCI Soundcards installed in the system !!-- 00:1f.3 Multimedia audio controller: Intel Corporation Cannon Point-LP High Definition Audio Controller (rev 11) !!Advanced information - PCI Vendor/Device/Subsystem ID's !!--- 00:1f.3 0401: 8086:9dc8 (rev 11) DeviceName: Onboard - Sound !!HDA-Intel Codec information !!--- --startcollapse-- Codec: Realtek ALC298 Address: 0 AFG Function Id: 0x1 (unsol 1) Vendor Id: 0x10ec0298 Subsystem Id: 0x144dc812 Revision Id: 0x100103 No Modem Function Group found Default PCM: rates [0x60]: 44100 48000 bits [0xe]: 16 20 24 formats [0x1]: PCM Default Amp-In caps: N/A Default Amp-Out caps: N/A State of AFG node 0x01: Power states: D0 D1 D2 D3 D3cold CLKSTOP EPSS Power: setting=D0, actual=D0 GPIO: io=8, o=0, i=0, unsolicited=1, wake=0 IO[0]: enable=0, dir=0, wake=0, sticky=0, data=0, unsol=0 IO[1]: enable=0, dir=0, wake=0, sticky=0, data=0, unsol=0 IO[2]: enable=0, dir=0, wake=0, sticky=0, data=0, unsol=0 IO[3]: enable=0, dir=0, wake=0, sticky=0, data=0, unsol=0 IO[4]: enable=0, dir=0, wake=0, sticky=0, data=0, unsol=0 IO[5]: enable=0, dir=0, wake=0, sticky=0, data=0, unsol=0 IO[6]: enable=0, dir=0, wake=0, sticky=0, data=0, unsol=0 IO[7]: enable=0, dir=0, wake=0, sticky=0, data=0, unsol=0 Node 0x02 [Audio Output] wcaps 0x41d: Stereo Amp-Out Control: name="Headphone Playback Volume", index=0, device=0 ControlAmp: chs=3, dir=Out, idx=0, ofs=0 Device: name="ALC298 Analog", type="Audio", device=0 Amp-Out caps: ofs=0x7f, nsteps=0x7f, stepsize=0x01, mute=0 Amp-Out vals: [0x00 0x00] Converter: stream=1, channel=0 PCM: rates [0x60]: 44100 48000 bits [0xe]: 16 20 24 formats [0x1]: PCM Power states: D0 D1 D2 D3 EPSS Power: setting=D0, actual=D0 Node 0x03 [Audio Output] wcaps 0x41d: Stereo Amp-Out Control: name="Speaker Playback Volume", index=0, device=0 ControlAmp: chs=3, dir=Out, idx=0, ofs=0 Amp-Out caps: ofs=0x7f, nsteps=0x7f, stepsize=0x01, mute=0 Amp-Out vals: [0x7f 0x7f] Converter: stream=1, channel=0 ProblemType: Bug DistroRelease: Ubuntu 19.10 Package: alsa-base 1.0.25+dfsg-0ubuntu5 ProcVersionSignature: Ubuntu 5.3.0-19.20-generic 5.3.1 Uname: Linux 5.3.0-19-generic x86_64 ApportVersion: 2.20.11-0ubuntu8.2 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: martin 1383 F pulseaudio CurrentDesktop: ubuntu:GNOME Date: Wed Nov 6 06:20:08 2019 InstallationDate: Installed on 2019-11-03 (3 days ago) InstallationMedia: Ubuntu 19.10 "Eoan Ermine" - Release amd64 (20191017) PackageArchitecture: all ProcEnviron: TERM=xterm-256color PATH=(custom, no user) XDG_RUNTIME_DIR= LANG=en_US.UTF-8 SHELL=/bin
[Touch-packages] [Bug 1851518] Re: [950SBE/951SBE, Realtek ALC298, Speaker, Internal] No sound on internal speakers, very very quiet on headphones
Hi, I was surprised, but none of these settings helped. Mode was set originally to options snd-hda-intel model=headset-mode-no-hp-mic sudo hda-verb /dev/snd/hwC0D0 0x20 SET_COEF_INDEX 0x8e sudo hda-verb /dev/snd/hwC0D0 0x20 SET_PROC_COEF 0x20 //check if headphone can output sound normally? Running speaker-test: very very quiet sudo hda-verb /dev/snd/hwC0D0 0x20 SET_COEF_INDEX 0x19 sudo hda-verb /dev/snd/hwC0D0 0x20 SET_PROC_COEF 0x317 //check if headphone can output sound normally? same result sudo hda-verb /dev/snd/hwC0D0 0x20 SET_COEF_INDEX 0x67 sudo hda-verb /dev/snd/hwC0D0 0x20 SET_PROC_COEF 0x1110 //check if headphone can output sound normally? same result sudo hda-verb /dev/snd/hwC0D0 0x20 SET_COEF_INDEX 0x4f sudo hda-verb /dev/snd/hwC0D0 0x20 SET_PROC_COEF 0xc429 //check if headphone can output sound normally? same result -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to alsa-driver in Ubuntu. https://bugs.launchpad.net/bugs/1851518 Title: [950SBE/951SBE, Realtek ALC298, Speaker, Internal] No sound on internal speakers, very very quiet on headphones Status in alsa-driver package in Ubuntu: New Bug description: I've been googling this issue for 10's of hours and tried many things. Relase of Ubuntu: 19.10 Expected outcome: Music plays on the internal speakers and headphones. Actual outcome: I can barely hear audio using headphones with volume turned up to 150%. Absolutely nothing comes out of the speakers. (The speakers sound great under Windows 10.) Complete alsa-info output is attached, but here are some snippets: !!DMI Information !!--- Manufacturer: SAMSUNG ELECTRONICS CO., LTD. Product Name: 950SBE/951SBE Product Version: P06RES Firmware Version: P06RES.075.190529.SP Board Vendor: SAMSUNG ELECTRONICS CO., LTD. Board Name:NP950SBE-K01US !!Kernel Information !!-- Kernel release:5.3.0-19-generic Operating System: GNU/Linux Architecture: x86_64 Processor: x86_64 SMP Enabled: Yes !!ALSA Version !! Driver version: k5.3.0-19-generic Library version:1.1.9 Utilities version: 1.1.9 !!Loaded ALSA modules !!--- snd_hda_intel !!Sound Servers on this system !! Pulseaudio: Installed - Yes (/usr/bin/pulseaudio) Running - Yes !!Soundcards recognised by ALSA !!- 0 [PCH]: HDA-Intel - HDA Intel PCH HDA Intel PCH at 0x604b118000 irq 177 !!PCI Soundcards installed in the system !!-- 00:1f.3 Multimedia audio controller: Intel Corporation Cannon Point-LP High Definition Audio Controller (rev 11) !!Advanced information - PCI Vendor/Device/Subsystem ID's !!--- 00:1f.3 0401: 8086:9dc8 (rev 11) DeviceName: Onboard - Sound !!HDA-Intel Codec information !!--- --startcollapse-- Codec: Realtek ALC298 Address: 0 AFG Function Id: 0x1 (unsol 1) Vendor Id: 0x10ec0298 Subsystem Id: 0x144dc812 Revision Id: 0x100103 No Modem Function Group found Default PCM: rates [0x60]: 44100 48000 bits [0xe]: 16 20 24 formats [0x1]: PCM Default Amp-In caps: N/A Default Amp-Out caps: N/A State of AFG node 0x01: Power states: D0 D1 D2 D3 D3cold CLKSTOP EPSS Power: setting=D0, actual=D0 GPIO: io=8, o=0, i=0, unsolicited=1, wake=0 IO[0]: enable=0, dir=0, wake=0, sticky=0, data=0, unsol=0 IO[1]: enable=0, dir=0, wake=0, sticky=0, data=0, unsol=0 IO[2]: enable=0, dir=0, wake=0, sticky=0, data=0, unsol=0 IO[3]: enable=0, dir=0, wake=0, sticky=0, data=0, unsol=0 IO[4]: enable=0, dir=0, wake=0, sticky=0, data=0, unsol=0 IO[5]: enable=0, dir=0, wake=0, sticky=0, data=0, unsol=0 IO[6]: enable=0, dir=0, wake=0, sticky=0, data=0, unsol=0 IO[7]: enable=0, dir=0, wake=0, sticky=0, data=0, unsol=0 Node 0x02 [Audio Output] wcaps 0x41d: Stereo Amp-Out Control: name="Headphone Playback Volume", index=0, device=0 ControlAmp: chs=3, dir=Out, idx=0, ofs=0 Device: name="ALC298 Analog", type="Audio", device=0 Amp-Out caps: ofs=0x7f, nsteps=0x7f, stepsize=0x01, mute=0 Amp-Out vals: [0x00 0x00] Converter: stream=1, channel=0 PCM: rates [0x60]: 44100 48000 bits [0xe]: 16 20 24 formats [0x1]: PCM Power states: D0 D1 D2 D3 EPSS Power: setting=D0, actual=D0 Node 0x03 [Audio Output] wcaps 0x41d: Stereo Amp-Out Control: name="Speaker Playback Volume", index=0, device=0 ControlAmp: chs=3, dir=Out, idx=0, ofs=0 Amp-Out caps: ofs=0x7f, nsteps=0x7f, stepsize=0x01, mute=0 Amp-Out vals: [0x7f 0x7f] Converter: stream=1, channel=0 ProblemType: Bug DistroRe
[Touch-packages] [Bug 1851518] Re: [950SBE/951SBE, Realtek ALC298, Speaker, Internal] No sound on internal speakers, very very quiet on headphones
Please remove the model= or keep model=headset-mode-no-hp-mic When headphone is very very quiet, please run: sudo hda-verb /dev/snd/hwC0D0 0x20 SET_COEF_INDEX 0x8e sudo hda-verb /dev/snd/hwC0D0 0x20 SET_PROC_COEF 0x20 //check if headphone can output sound normally? sudo hda-verb /dev/snd/hwC0D0 0x20 SET_COEF_INDEX 0x19 sudo hda-verb /dev/snd/hwC0D0 0x20 SET_PROC_COEF 0x317 //check if headphone can output sound normally? sudo hda-verb /dev/snd/hwC0D0 0x20 SET_COEF_INDEX 0x67 sudo hda-verb /dev/snd/hwC0D0 0x20 SET_PROC_COEF 0x1110 //check if headphone can output sound normally? sudo hda-verb /dev/snd/hwC0D0 0x20 SET_COEF_INDEX 0x4f sudo hda-verb /dev/snd/hwC0D0 0x20 SET_PROC_COEF 0xc429 //check if headphone can output sound normally? -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to alsa-driver in Ubuntu. https://bugs.launchpad.net/bugs/1851518 Title: [950SBE/951SBE, Realtek ALC298, Speaker, Internal] No sound on internal speakers, very very quiet on headphones Status in alsa-driver package in Ubuntu: New Bug description: I've been googling this issue for 10's of hours and tried many things. Relase of Ubuntu: 19.10 Expected outcome: Music plays on the internal speakers and headphones. Actual outcome: I can barely hear audio using headphones with volume turned up to 150%. Absolutely nothing comes out of the speakers. (The speakers sound great under Windows 10.) Complete alsa-info output is attached, but here are some snippets: !!DMI Information !!--- Manufacturer: SAMSUNG ELECTRONICS CO., LTD. Product Name: 950SBE/951SBE Product Version: P06RES Firmware Version: P06RES.075.190529.SP Board Vendor: SAMSUNG ELECTRONICS CO., LTD. Board Name:NP950SBE-K01US !!Kernel Information !!-- Kernel release:5.3.0-19-generic Operating System: GNU/Linux Architecture: x86_64 Processor: x86_64 SMP Enabled: Yes !!ALSA Version !! Driver version: k5.3.0-19-generic Library version:1.1.9 Utilities version: 1.1.9 !!Loaded ALSA modules !!--- snd_hda_intel !!Sound Servers on this system !! Pulseaudio: Installed - Yes (/usr/bin/pulseaudio) Running - Yes !!Soundcards recognised by ALSA !!- 0 [PCH]: HDA-Intel - HDA Intel PCH HDA Intel PCH at 0x604b118000 irq 177 !!PCI Soundcards installed in the system !!-- 00:1f.3 Multimedia audio controller: Intel Corporation Cannon Point-LP High Definition Audio Controller (rev 11) !!Advanced information - PCI Vendor/Device/Subsystem ID's !!--- 00:1f.3 0401: 8086:9dc8 (rev 11) DeviceName: Onboard - Sound !!HDA-Intel Codec information !!--- --startcollapse-- Codec: Realtek ALC298 Address: 0 AFG Function Id: 0x1 (unsol 1) Vendor Id: 0x10ec0298 Subsystem Id: 0x144dc812 Revision Id: 0x100103 No Modem Function Group found Default PCM: rates [0x60]: 44100 48000 bits [0xe]: 16 20 24 formats [0x1]: PCM Default Amp-In caps: N/A Default Amp-Out caps: N/A State of AFG node 0x01: Power states: D0 D1 D2 D3 D3cold CLKSTOP EPSS Power: setting=D0, actual=D0 GPIO: io=8, o=0, i=0, unsolicited=1, wake=0 IO[0]: enable=0, dir=0, wake=0, sticky=0, data=0, unsol=0 IO[1]: enable=0, dir=0, wake=0, sticky=0, data=0, unsol=0 IO[2]: enable=0, dir=0, wake=0, sticky=0, data=0, unsol=0 IO[3]: enable=0, dir=0, wake=0, sticky=0, data=0, unsol=0 IO[4]: enable=0, dir=0, wake=0, sticky=0, data=0, unsol=0 IO[5]: enable=0, dir=0, wake=0, sticky=0, data=0, unsol=0 IO[6]: enable=0, dir=0, wake=0, sticky=0, data=0, unsol=0 IO[7]: enable=0, dir=0, wake=0, sticky=0, data=0, unsol=0 Node 0x02 [Audio Output] wcaps 0x41d: Stereo Amp-Out Control: name="Headphone Playback Volume", index=0, device=0 ControlAmp: chs=3, dir=Out, idx=0, ofs=0 Device: name="ALC298 Analog", type="Audio", device=0 Amp-Out caps: ofs=0x7f, nsteps=0x7f, stepsize=0x01, mute=0 Amp-Out vals: [0x00 0x00] Converter: stream=1, channel=0 PCM: rates [0x60]: 44100 48000 bits [0xe]: 16 20 24 formats [0x1]: PCM Power states: D0 D1 D2 D3 EPSS Power: setting=D0, actual=D0 Node 0x03 [Audio Output] wcaps 0x41d: Stereo Amp-Out Control: name="Speaker Playback Volume", index=0, device=0 ControlAmp: chs=3, dir=Out, idx=0, ofs=0 Amp-Out caps: ofs=0x7f, nsteps=0x7f, stepsize=0x01, mute=0 Amp-Out vals: [0x7f 0x7f] Converter: stream=1, channel=0 ProblemType: Bug DistroRelease: Ubuntu 19.10 Package: alsa-base 1.0.25+dfsg-0ubuntu5 ProcVersionSignature: Ubuntu 5.3.0-1
[Touch-packages] [Bug 1851518] Re: [950SBE/951SBE, Realtek ALC298, Speaker, Internal] No sound on internal speakers, very very quiet on headphones
Using options snd-hda-intel model=headset-mode-no-hp-mic Result: Headphones: very very quiet Internal speakers: Nothing Alsa-info is attached. Thank you. ** Attachment added: "alsa-info-with-coefficients-headset-mode-no-hp-mic.txt" https://bugs.launchpad.net/ubuntu/+source/alsa-driver/+bug/1851518/+attachment/5304381/+files/alsa-info-with-coefficients-headset-mode-no-hp-mic.txt -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to alsa-driver in Ubuntu. https://bugs.launchpad.net/bugs/1851518 Title: [950SBE/951SBE, Realtek ALC298, Speaker, Internal] No sound on internal speakers, very very quiet on headphones Status in alsa-driver package in Ubuntu: New Bug description: I've been googling this issue for 10's of hours and tried many things. Relase of Ubuntu: 19.10 Expected outcome: Music plays on the internal speakers and headphones. Actual outcome: I can barely hear audio using headphones with volume turned up to 150%. Absolutely nothing comes out of the speakers. (The speakers sound great under Windows 10.) Complete alsa-info output is attached, but here are some snippets: !!DMI Information !!--- Manufacturer: SAMSUNG ELECTRONICS CO., LTD. Product Name: 950SBE/951SBE Product Version: P06RES Firmware Version: P06RES.075.190529.SP Board Vendor: SAMSUNG ELECTRONICS CO., LTD. Board Name:NP950SBE-K01US !!Kernel Information !!-- Kernel release:5.3.0-19-generic Operating System: GNU/Linux Architecture: x86_64 Processor: x86_64 SMP Enabled: Yes !!ALSA Version !! Driver version: k5.3.0-19-generic Library version:1.1.9 Utilities version: 1.1.9 !!Loaded ALSA modules !!--- snd_hda_intel !!Sound Servers on this system !! Pulseaudio: Installed - Yes (/usr/bin/pulseaudio) Running - Yes !!Soundcards recognised by ALSA !!- 0 [PCH]: HDA-Intel - HDA Intel PCH HDA Intel PCH at 0x604b118000 irq 177 !!PCI Soundcards installed in the system !!-- 00:1f.3 Multimedia audio controller: Intel Corporation Cannon Point-LP High Definition Audio Controller (rev 11) !!Advanced information - PCI Vendor/Device/Subsystem ID's !!--- 00:1f.3 0401: 8086:9dc8 (rev 11) DeviceName: Onboard - Sound !!HDA-Intel Codec information !!--- --startcollapse-- Codec: Realtek ALC298 Address: 0 AFG Function Id: 0x1 (unsol 1) Vendor Id: 0x10ec0298 Subsystem Id: 0x144dc812 Revision Id: 0x100103 No Modem Function Group found Default PCM: rates [0x60]: 44100 48000 bits [0xe]: 16 20 24 formats [0x1]: PCM Default Amp-In caps: N/A Default Amp-Out caps: N/A State of AFG node 0x01: Power states: D0 D1 D2 D3 D3cold CLKSTOP EPSS Power: setting=D0, actual=D0 GPIO: io=8, o=0, i=0, unsolicited=1, wake=0 IO[0]: enable=0, dir=0, wake=0, sticky=0, data=0, unsol=0 IO[1]: enable=0, dir=0, wake=0, sticky=0, data=0, unsol=0 IO[2]: enable=0, dir=0, wake=0, sticky=0, data=0, unsol=0 IO[3]: enable=0, dir=0, wake=0, sticky=0, data=0, unsol=0 IO[4]: enable=0, dir=0, wake=0, sticky=0, data=0, unsol=0 IO[5]: enable=0, dir=0, wake=0, sticky=0, data=0, unsol=0 IO[6]: enable=0, dir=0, wake=0, sticky=0, data=0, unsol=0 IO[7]: enable=0, dir=0, wake=0, sticky=0, data=0, unsol=0 Node 0x02 [Audio Output] wcaps 0x41d: Stereo Amp-Out Control: name="Headphone Playback Volume", index=0, device=0 ControlAmp: chs=3, dir=Out, idx=0, ofs=0 Device: name="ALC298 Analog", type="Audio", device=0 Amp-Out caps: ofs=0x7f, nsteps=0x7f, stepsize=0x01, mute=0 Amp-Out vals: [0x00 0x00] Converter: stream=1, channel=0 PCM: rates [0x60]: 44100 48000 bits [0xe]: 16 20 24 formats [0x1]: PCM Power states: D0 D1 D2 D3 EPSS Power: setting=D0, actual=D0 Node 0x03 [Audio Output] wcaps 0x41d: Stereo Amp-Out Control: name="Speaker Playback Volume", index=0, device=0 ControlAmp: chs=3, dir=Out, idx=0, ofs=0 Amp-Out caps: ofs=0x7f, nsteps=0x7f, stepsize=0x01, mute=0 Amp-Out vals: [0x7f 0x7f] Converter: stream=1, channel=0 ProblemType: Bug DistroRelease: Ubuntu 19.10 Package: alsa-base 1.0.25+dfsg-0ubuntu5 ProcVersionSignature: Ubuntu 5.3.0-19.20-generic 5.3.1 Uname: Linux 5.3.0-19-generic x86_64 ApportVersion: 2.20.11-0ubuntu8.2 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: martin 1383 F pulseaudio CurrentDesktop: ubuntu:GNOME Date: Wed Nov 6 06:20:08 2019 InstallationDate: Installed on 2019-11-03 (3 days ago) Installatio
[Touch-packages] [Bug 1851518] Re: [950SBE/951SBE, Realtek ALC298, Speaker, Internal] No sound on internal speakers, very very quiet on headphones
Please test: options snd-hda-intel model=headset-mode-no-hp-mic -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to alsa-driver in Ubuntu. https://bugs.launchpad.net/bugs/1851518 Title: [950SBE/951SBE, Realtek ALC298, Speaker, Internal] No sound on internal speakers, very very quiet on headphones Status in alsa-driver package in Ubuntu: New Bug description: I've been googling this issue for 10's of hours and tried many things. Relase of Ubuntu: 19.10 Expected outcome: Music plays on the internal speakers and headphones. Actual outcome: I can barely hear audio using headphones with volume turned up to 150%. Absolutely nothing comes out of the speakers. (The speakers sound great under Windows 10.) Complete alsa-info output is attached, but here are some snippets: !!DMI Information !!--- Manufacturer: SAMSUNG ELECTRONICS CO., LTD. Product Name: 950SBE/951SBE Product Version: P06RES Firmware Version: P06RES.075.190529.SP Board Vendor: SAMSUNG ELECTRONICS CO., LTD. Board Name:NP950SBE-K01US !!Kernel Information !!-- Kernel release:5.3.0-19-generic Operating System: GNU/Linux Architecture: x86_64 Processor: x86_64 SMP Enabled: Yes !!ALSA Version !! Driver version: k5.3.0-19-generic Library version:1.1.9 Utilities version: 1.1.9 !!Loaded ALSA modules !!--- snd_hda_intel !!Sound Servers on this system !! Pulseaudio: Installed - Yes (/usr/bin/pulseaudio) Running - Yes !!Soundcards recognised by ALSA !!- 0 [PCH]: HDA-Intel - HDA Intel PCH HDA Intel PCH at 0x604b118000 irq 177 !!PCI Soundcards installed in the system !!-- 00:1f.3 Multimedia audio controller: Intel Corporation Cannon Point-LP High Definition Audio Controller (rev 11) !!Advanced information - PCI Vendor/Device/Subsystem ID's !!--- 00:1f.3 0401: 8086:9dc8 (rev 11) DeviceName: Onboard - Sound !!HDA-Intel Codec information !!--- --startcollapse-- Codec: Realtek ALC298 Address: 0 AFG Function Id: 0x1 (unsol 1) Vendor Id: 0x10ec0298 Subsystem Id: 0x144dc812 Revision Id: 0x100103 No Modem Function Group found Default PCM: rates [0x60]: 44100 48000 bits [0xe]: 16 20 24 formats [0x1]: PCM Default Amp-In caps: N/A Default Amp-Out caps: N/A State of AFG node 0x01: Power states: D0 D1 D2 D3 D3cold CLKSTOP EPSS Power: setting=D0, actual=D0 GPIO: io=8, o=0, i=0, unsolicited=1, wake=0 IO[0]: enable=0, dir=0, wake=0, sticky=0, data=0, unsol=0 IO[1]: enable=0, dir=0, wake=0, sticky=0, data=0, unsol=0 IO[2]: enable=0, dir=0, wake=0, sticky=0, data=0, unsol=0 IO[3]: enable=0, dir=0, wake=0, sticky=0, data=0, unsol=0 IO[4]: enable=0, dir=0, wake=0, sticky=0, data=0, unsol=0 IO[5]: enable=0, dir=0, wake=0, sticky=0, data=0, unsol=0 IO[6]: enable=0, dir=0, wake=0, sticky=0, data=0, unsol=0 IO[7]: enable=0, dir=0, wake=0, sticky=0, data=0, unsol=0 Node 0x02 [Audio Output] wcaps 0x41d: Stereo Amp-Out Control: name="Headphone Playback Volume", index=0, device=0 ControlAmp: chs=3, dir=Out, idx=0, ofs=0 Device: name="ALC298 Analog", type="Audio", device=0 Amp-Out caps: ofs=0x7f, nsteps=0x7f, stepsize=0x01, mute=0 Amp-Out vals: [0x00 0x00] Converter: stream=1, channel=0 PCM: rates [0x60]: 44100 48000 bits [0xe]: 16 20 24 formats [0x1]: PCM Power states: D0 D1 D2 D3 EPSS Power: setting=D0, actual=D0 Node 0x03 [Audio Output] wcaps 0x41d: Stereo Amp-Out Control: name="Speaker Playback Volume", index=0, device=0 ControlAmp: chs=3, dir=Out, idx=0, ofs=0 Amp-Out caps: ofs=0x7f, nsteps=0x7f, stepsize=0x01, mute=0 Amp-Out vals: [0x7f 0x7f] Converter: stream=1, channel=0 ProblemType: Bug DistroRelease: Ubuntu 19.10 Package: alsa-base 1.0.25+dfsg-0ubuntu5 ProcVersionSignature: Ubuntu 5.3.0-19.20-generic 5.3.1 Uname: Linux 5.3.0-19-generic x86_64 ApportVersion: 2.20.11-0ubuntu8.2 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: martin 1383 F pulseaudio CurrentDesktop: ubuntu:GNOME Date: Wed Nov 6 06:20:08 2019 InstallationDate: Installed on 2019-11-03 (3 days ago) InstallationMedia: Ubuntu 19.10 "Eoan Ermine" - Release amd64 (20191017) PackageArchitecture: all ProcEnviron: TERM=xterm-256color PATH=(custom, no user) XDG_RUNTIME_DIR= LANG=en_US.UTF-8 SHELL=/bin/bash SourcePackage: alsa-driver Symptom: audio Symptom_AlsaPlaybackTest: ALSA playback test through plughw:PCH f
[Touch-packages] [Bug 1851518] Re: [950SBE/951SBE, Realtek ALC298, Speaker, Internal] No sound on internal speakers, very very quiet on headphones
Made a little progress: headphones work with /etc/modprobe.d/alsa-base.conf: options snd-hda-intel model=mono-speakers Volume is loud and clear, in stereo! alsa-info.sh output is attached with coefficients. Headphones were not plugged in at that time to keep the diffs to a minimum. ** Attachment added: "alsa-info-with-coefficients-headphones-work.txt" https://bugs.launchpad.net/ubuntu/+source/alsa-driver/+bug/1851518/+attachment/5304308/+files/alsa-info-with-coefficients-headphones-work.txt -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to alsa-driver in Ubuntu. https://bugs.launchpad.net/bugs/1851518 Title: [950SBE/951SBE, Realtek ALC298, Speaker, Internal] No sound on internal speakers, very very quiet on headphones Status in alsa-driver package in Ubuntu: New Bug description: I've been googling this issue for 10's of hours and tried many things. Relase of Ubuntu: 19.10 Expected outcome: Music plays on the internal speakers and headphones. Actual outcome: I can barely hear audio using headphones with volume turned up to 150%. Absolutely nothing comes out of the speakers. (The speakers sound great under Windows 10.) Complete alsa-info output is attached, but here are some snippets: !!DMI Information !!--- Manufacturer: SAMSUNG ELECTRONICS CO., LTD. Product Name: 950SBE/951SBE Product Version: P06RES Firmware Version: P06RES.075.190529.SP Board Vendor: SAMSUNG ELECTRONICS CO., LTD. Board Name:NP950SBE-K01US !!Kernel Information !!-- Kernel release:5.3.0-19-generic Operating System: GNU/Linux Architecture: x86_64 Processor: x86_64 SMP Enabled: Yes !!ALSA Version !! Driver version: k5.3.0-19-generic Library version:1.1.9 Utilities version: 1.1.9 !!Loaded ALSA modules !!--- snd_hda_intel !!Sound Servers on this system !! Pulseaudio: Installed - Yes (/usr/bin/pulseaudio) Running - Yes !!Soundcards recognised by ALSA !!- 0 [PCH]: HDA-Intel - HDA Intel PCH HDA Intel PCH at 0x604b118000 irq 177 !!PCI Soundcards installed in the system !!-- 00:1f.3 Multimedia audio controller: Intel Corporation Cannon Point-LP High Definition Audio Controller (rev 11) !!Advanced information - PCI Vendor/Device/Subsystem ID's !!--- 00:1f.3 0401: 8086:9dc8 (rev 11) DeviceName: Onboard - Sound !!HDA-Intel Codec information !!--- --startcollapse-- Codec: Realtek ALC298 Address: 0 AFG Function Id: 0x1 (unsol 1) Vendor Id: 0x10ec0298 Subsystem Id: 0x144dc812 Revision Id: 0x100103 No Modem Function Group found Default PCM: rates [0x60]: 44100 48000 bits [0xe]: 16 20 24 formats [0x1]: PCM Default Amp-In caps: N/A Default Amp-Out caps: N/A State of AFG node 0x01: Power states: D0 D1 D2 D3 D3cold CLKSTOP EPSS Power: setting=D0, actual=D0 GPIO: io=8, o=0, i=0, unsolicited=1, wake=0 IO[0]: enable=0, dir=0, wake=0, sticky=0, data=0, unsol=0 IO[1]: enable=0, dir=0, wake=0, sticky=0, data=0, unsol=0 IO[2]: enable=0, dir=0, wake=0, sticky=0, data=0, unsol=0 IO[3]: enable=0, dir=0, wake=0, sticky=0, data=0, unsol=0 IO[4]: enable=0, dir=0, wake=0, sticky=0, data=0, unsol=0 IO[5]: enable=0, dir=0, wake=0, sticky=0, data=0, unsol=0 IO[6]: enable=0, dir=0, wake=0, sticky=0, data=0, unsol=0 IO[7]: enable=0, dir=0, wake=0, sticky=0, data=0, unsol=0 Node 0x02 [Audio Output] wcaps 0x41d: Stereo Amp-Out Control: name="Headphone Playback Volume", index=0, device=0 ControlAmp: chs=3, dir=Out, idx=0, ofs=0 Device: name="ALC298 Analog", type="Audio", device=0 Amp-Out caps: ofs=0x7f, nsteps=0x7f, stepsize=0x01, mute=0 Amp-Out vals: [0x00 0x00] Converter: stream=1, channel=0 PCM: rates [0x60]: 44100 48000 bits [0xe]: 16 20 24 formats [0x1]: PCM Power states: D0 D1 D2 D3 EPSS Power: setting=D0, actual=D0 Node 0x03 [Audio Output] wcaps 0x41d: Stereo Amp-Out Control: name="Speaker Playback Volume", index=0, device=0 ControlAmp: chs=3, dir=Out, idx=0, ofs=0 Amp-Out caps: ofs=0x7f, nsteps=0x7f, stepsize=0x01, mute=0 Amp-Out vals: [0x7f 0x7f] Converter: stream=1, channel=0 ProblemType: Bug DistroRelease: Ubuntu 19.10 Package: alsa-base 1.0.25+dfsg-0ubuntu5 ProcVersionSignature: Ubuntu 5.3.0-19.20-generic 5.3.1 Uname: Linux 5.3.0-19-generic x86_64 ApportVersion: 2.20.11-0ubuntu8.2 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: martin 1383 F pulseaudio CurrentDesktop:
[Touch-packages] [Bug 1851518] Re: [950SBE/951SBE, Realtek ALC298, Speaker, Internal] No sound on internal speakers, very very quiet on headphones
I will find a machine wit alc298 next week, and compare the coeff with your machine. thx. -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to alsa-driver in Ubuntu. https://bugs.launchpad.net/bugs/1851518 Title: [950SBE/951SBE, Realtek ALC298, Speaker, Internal] No sound on internal speakers, very very quiet on headphones Status in alsa-driver package in Ubuntu: New Bug description: I've been googling this issue for 10's of hours and tried many things. Relase of Ubuntu: 19.10 Expected outcome: Music plays on the internal speakers and headphones. Actual outcome: I can barely hear audio using headphones with volume turned up to 150%. Absolutely nothing comes out of the speakers. (The speakers sound great under Windows 10.) Complete alsa-info output is attached, but here are some snippets: !!DMI Information !!--- Manufacturer: SAMSUNG ELECTRONICS CO., LTD. Product Name: 950SBE/951SBE Product Version: P06RES Firmware Version: P06RES.075.190529.SP Board Vendor: SAMSUNG ELECTRONICS CO., LTD. Board Name:NP950SBE-K01US !!Kernel Information !!-- Kernel release:5.3.0-19-generic Operating System: GNU/Linux Architecture: x86_64 Processor: x86_64 SMP Enabled: Yes !!ALSA Version !! Driver version: k5.3.0-19-generic Library version:1.1.9 Utilities version: 1.1.9 !!Loaded ALSA modules !!--- snd_hda_intel !!Sound Servers on this system !! Pulseaudio: Installed - Yes (/usr/bin/pulseaudio) Running - Yes !!Soundcards recognised by ALSA !!- 0 [PCH]: HDA-Intel - HDA Intel PCH HDA Intel PCH at 0x604b118000 irq 177 !!PCI Soundcards installed in the system !!-- 00:1f.3 Multimedia audio controller: Intel Corporation Cannon Point-LP High Definition Audio Controller (rev 11) !!Advanced information - PCI Vendor/Device/Subsystem ID's !!--- 00:1f.3 0401: 8086:9dc8 (rev 11) DeviceName: Onboard - Sound !!HDA-Intel Codec information !!--- --startcollapse-- Codec: Realtek ALC298 Address: 0 AFG Function Id: 0x1 (unsol 1) Vendor Id: 0x10ec0298 Subsystem Id: 0x144dc812 Revision Id: 0x100103 No Modem Function Group found Default PCM: rates [0x60]: 44100 48000 bits [0xe]: 16 20 24 formats [0x1]: PCM Default Amp-In caps: N/A Default Amp-Out caps: N/A State of AFG node 0x01: Power states: D0 D1 D2 D3 D3cold CLKSTOP EPSS Power: setting=D0, actual=D0 GPIO: io=8, o=0, i=0, unsolicited=1, wake=0 IO[0]: enable=0, dir=0, wake=0, sticky=0, data=0, unsol=0 IO[1]: enable=0, dir=0, wake=0, sticky=0, data=0, unsol=0 IO[2]: enable=0, dir=0, wake=0, sticky=0, data=0, unsol=0 IO[3]: enable=0, dir=0, wake=0, sticky=0, data=0, unsol=0 IO[4]: enable=0, dir=0, wake=0, sticky=0, data=0, unsol=0 IO[5]: enable=0, dir=0, wake=0, sticky=0, data=0, unsol=0 IO[6]: enable=0, dir=0, wake=0, sticky=0, data=0, unsol=0 IO[7]: enable=0, dir=0, wake=0, sticky=0, data=0, unsol=0 Node 0x02 [Audio Output] wcaps 0x41d: Stereo Amp-Out Control: name="Headphone Playback Volume", index=0, device=0 ControlAmp: chs=3, dir=Out, idx=0, ofs=0 Device: name="ALC298 Analog", type="Audio", device=0 Amp-Out caps: ofs=0x7f, nsteps=0x7f, stepsize=0x01, mute=0 Amp-Out vals: [0x00 0x00] Converter: stream=1, channel=0 PCM: rates [0x60]: 44100 48000 bits [0xe]: 16 20 24 formats [0x1]: PCM Power states: D0 D1 D2 D3 EPSS Power: setting=D0, actual=D0 Node 0x03 [Audio Output] wcaps 0x41d: Stereo Amp-Out Control: name="Speaker Playback Volume", index=0, device=0 ControlAmp: chs=3, dir=Out, idx=0, ofs=0 Amp-Out caps: ofs=0x7f, nsteps=0x7f, stepsize=0x01, mute=0 Amp-Out vals: [0x7f 0x7f] Converter: stream=1, channel=0 ProblemType: Bug DistroRelease: Ubuntu 19.10 Package: alsa-base 1.0.25+dfsg-0ubuntu5 ProcVersionSignature: Ubuntu 5.3.0-19.20-generic 5.3.1 Uname: Linux 5.3.0-19-generic x86_64 ApportVersion: 2.20.11-0ubuntu8.2 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: martin 1383 F pulseaudio CurrentDesktop: ubuntu:GNOME Date: Wed Nov 6 06:20:08 2019 InstallationDate: Installed on 2019-11-03 (3 days ago) InstallationMedia: Ubuntu 19.10 "Eoan Ermine" - Release amd64 (20191017) PackageArchitecture: all ProcEnviron: TERM=xterm-256color PATH=(custom, no user) XDG_RUNTIME_DIR= LANG=en_US.UTF-8 SHELL=/bin/bash SourcePackage: alsa-driver Symptom: audio Symptom_AlsaPlaybackTest: ALSA playbac
[Touch-packages] [Bug 1851518] Re: [950SBE/951SBE, Realtek ALC298, Speaker, Internal] No sound on internal speakers, very very quiet on headphones
In the last few days, I've tried a few more things (incl. re-installing alsa, pulseaudio multiple times), but still have the same issue: headphones are extremely quiet, and nothing coming out of the internal speakers. The alsa-info with coefficients is attached. Thanks for looking. ** Attachment added: "alsa-info-with-coefficients.txt" https://bugs.launchpad.net/ubuntu/+source/alsa-driver/+bug/1851518/+attachment/5304078/+files/alsa-info-with-coefficients.txt -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to alsa-driver in Ubuntu. https://bugs.launchpad.net/bugs/1851518 Title: [950SBE/951SBE, Realtek ALC298, Speaker, Internal] No sound on internal speakers, very very quiet on headphones Status in alsa-driver package in Ubuntu: New Bug description: I've been googling this issue for 10's of hours and tried many things. Relase of Ubuntu: 19.10 Expected outcome: Music plays on the internal speakers and headphones. Actual outcome: I can barely hear audio using headphones with volume turned up to 150%. Absolutely nothing comes out of the speakers. (The speakers sound great under Windows 10.) Complete alsa-info output is attached, but here are some snippets: !!DMI Information !!--- Manufacturer: SAMSUNG ELECTRONICS CO., LTD. Product Name: 950SBE/951SBE Product Version: P06RES Firmware Version: P06RES.075.190529.SP Board Vendor: SAMSUNG ELECTRONICS CO., LTD. Board Name:NP950SBE-K01US !!Kernel Information !!-- Kernel release:5.3.0-19-generic Operating System: GNU/Linux Architecture: x86_64 Processor: x86_64 SMP Enabled: Yes !!ALSA Version !! Driver version: k5.3.0-19-generic Library version:1.1.9 Utilities version: 1.1.9 !!Loaded ALSA modules !!--- snd_hda_intel !!Sound Servers on this system !! Pulseaudio: Installed - Yes (/usr/bin/pulseaudio) Running - Yes !!Soundcards recognised by ALSA !!- 0 [PCH]: HDA-Intel - HDA Intel PCH HDA Intel PCH at 0x604b118000 irq 177 !!PCI Soundcards installed in the system !!-- 00:1f.3 Multimedia audio controller: Intel Corporation Cannon Point-LP High Definition Audio Controller (rev 11) !!Advanced information - PCI Vendor/Device/Subsystem ID's !!--- 00:1f.3 0401: 8086:9dc8 (rev 11) DeviceName: Onboard - Sound !!HDA-Intel Codec information !!--- --startcollapse-- Codec: Realtek ALC298 Address: 0 AFG Function Id: 0x1 (unsol 1) Vendor Id: 0x10ec0298 Subsystem Id: 0x144dc812 Revision Id: 0x100103 No Modem Function Group found Default PCM: rates [0x60]: 44100 48000 bits [0xe]: 16 20 24 formats [0x1]: PCM Default Amp-In caps: N/A Default Amp-Out caps: N/A State of AFG node 0x01: Power states: D0 D1 D2 D3 D3cold CLKSTOP EPSS Power: setting=D0, actual=D0 GPIO: io=8, o=0, i=0, unsolicited=1, wake=0 IO[0]: enable=0, dir=0, wake=0, sticky=0, data=0, unsol=0 IO[1]: enable=0, dir=0, wake=0, sticky=0, data=0, unsol=0 IO[2]: enable=0, dir=0, wake=0, sticky=0, data=0, unsol=0 IO[3]: enable=0, dir=0, wake=0, sticky=0, data=0, unsol=0 IO[4]: enable=0, dir=0, wake=0, sticky=0, data=0, unsol=0 IO[5]: enable=0, dir=0, wake=0, sticky=0, data=0, unsol=0 IO[6]: enable=0, dir=0, wake=0, sticky=0, data=0, unsol=0 IO[7]: enable=0, dir=0, wake=0, sticky=0, data=0, unsol=0 Node 0x02 [Audio Output] wcaps 0x41d: Stereo Amp-Out Control: name="Headphone Playback Volume", index=0, device=0 ControlAmp: chs=3, dir=Out, idx=0, ofs=0 Device: name="ALC298 Analog", type="Audio", device=0 Amp-Out caps: ofs=0x7f, nsteps=0x7f, stepsize=0x01, mute=0 Amp-Out vals: [0x00 0x00] Converter: stream=1, channel=0 PCM: rates [0x60]: 44100 48000 bits [0xe]: 16 20 24 formats [0x1]: PCM Power states: D0 D1 D2 D3 EPSS Power: setting=D0, actual=D0 Node 0x03 [Audio Output] wcaps 0x41d: Stereo Amp-Out Control: name="Speaker Playback Volume", index=0, device=0 ControlAmp: chs=3, dir=Out, idx=0, ofs=0 Amp-Out caps: ofs=0x7f, nsteps=0x7f, stepsize=0x01, mute=0 Amp-Out vals: [0x7f 0x7f] Converter: stream=1, channel=0 ProblemType: Bug DistroRelease: Ubuntu 19.10 Package: alsa-base 1.0.25+dfsg-0ubuntu5 ProcVersionSignature: Ubuntu 5.3.0-19.20-generic 5.3.1 Uname: Linux 5.3.0-19-generic x86_64 ApportVersion: 2.20.11-0ubuntu8.2 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: martin 1383 F pulseaudio CurrentDesktop: ubuntu:GNOME Date: Wed Nov 6 06
[Touch-packages] [Bug 1851518] Re: [950SBE/951SBE, Realtek ALC298, Speaker, Internal] No sound on internal speakers, very very quiet on headphones
Please collect an alsa-info.txt with coeff dumped: sudo su echo 1 > /sys/module/snd_hda_codec/parameters/dump_coef then run alsa-info and upload the log. thx. -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to alsa-driver in Ubuntu. https://bugs.launchpad.net/bugs/1851518 Title: [950SBE/951SBE, Realtek ALC298, Speaker, Internal] No sound on internal speakers, very very quiet on headphones Status in alsa-driver package in Ubuntu: New Bug description: I've been googling this issue for 10's of hours and tried many things. Relase of Ubuntu: 19.10 Expected outcome: Music plays on the internal speakers and headphones. Actual outcome: I can barely hear audio using headphones with volume turned up to 150%. Absolutely nothing comes out of the speakers. (The speakers sound great under Windows 10.) Complete alsa-info output is attached, but here are some snippets: !!DMI Information !!--- Manufacturer: SAMSUNG ELECTRONICS CO., LTD. Product Name: 950SBE/951SBE Product Version: P06RES Firmware Version: P06RES.075.190529.SP Board Vendor: SAMSUNG ELECTRONICS CO., LTD. Board Name:NP950SBE-K01US !!Kernel Information !!-- Kernel release:5.3.0-19-generic Operating System: GNU/Linux Architecture: x86_64 Processor: x86_64 SMP Enabled: Yes !!ALSA Version !! Driver version: k5.3.0-19-generic Library version:1.1.9 Utilities version: 1.1.9 !!Loaded ALSA modules !!--- snd_hda_intel !!Sound Servers on this system !! Pulseaudio: Installed - Yes (/usr/bin/pulseaudio) Running - Yes !!Soundcards recognised by ALSA !!- 0 [PCH]: HDA-Intel - HDA Intel PCH HDA Intel PCH at 0x604b118000 irq 177 !!PCI Soundcards installed in the system !!-- 00:1f.3 Multimedia audio controller: Intel Corporation Cannon Point-LP High Definition Audio Controller (rev 11) !!Advanced information - PCI Vendor/Device/Subsystem ID's !!--- 00:1f.3 0401: 8086:9dc8 (rev 11) DeviceName: Onboard - Sound !!HDA-Intel Codec information !!--- --startcollapse-- Codec: Realtek ALC298 Address: 0 AFG Function Id: 0x1 (unsol 1) Vendor Id: 0x10ec0298 Subsystem Id: 0x144dc812 Revision Id: 0x100103 No Modem Function Group found Default PCM: rates [0x60]: 44100 48000 bits [0xe]: 16 20 24 formats [0x1]: PCM Default Amp-In caps: N/A Default Amp-Out caps: N/A State of AFG node 0x01: Power states: D0 D1 D2 D3 D3cold CLKSTOP EPSS Power: setting=D0, actual=D0 GPIO: io=8, o=0, i=0, unsolicited=1, wake=0 IO[0]: enable=0, dir=0, wake=0, sticky=0, data=0, unsol=0 IO[1]: enable=0, dir=0, wake=0, sticky=0, data=0, unsol=0 IO[2]: enable=0, dir=0, wake=0, sticky=0, data=0, unsol=0 IO[3]: enable=0, dir=0, wake=0, sticky=0, data=0, unsol=0 IO[4]: enable=0, dir=0, wake=0, sticky=0, data=0, unsol=0 IO[5]: enable=0, dir=0, wake=0, sticky=0, data=0, unsol=0 IO[6]: enable=0, dir=0, wake=0, sticky=0, data=0, unsol=0 IO[7]: enable=0, dir=0, wake=0, sticky=0, data=0, unsol=0 Node 0x02 [Audio Output] wcaps 0x41d: Stereo Amp-Out Control: name="Headphone Playback Volume", index=0, device=0 ControlAmp: chs=3, dir=Out, idx=0, ofs=0 Device: name="ALC298 Analog", type="Audio", device=0 Amp-Out caps: ofs=0x7f, nsteps=0x7f, stepsize=0x01, mute=0 Amp-Out vals: [0x00 0x00] Converter: stream=1, channel=0 PCM: rates [0x60]: 44100 48000 bits [0xe]: 16 20 24 formats [0x1]: PCM Power states: D0 D1 D2 D3 EPSS Power: setting=D0, actual=D0 Node 0x03 [Audio Output] wcaps 0x41d: Stereo Amp-Out Control: name="Speaker Playback Volume", index=0, device=0 ControlAmp: chs=3, dir=Out, idx=0, ofs=0 Amp-Out caps: ofs=0x7f, nsteps=0x7f, stepsize=0x01, mute=0 Amp-Out vals: [0x7f 0x7f] Converter: stream=1, channel=0 ProblemType: Bug DistroRelease: Ubuntu 19.10 Package: alsa-base 1.0.25+dfsg-0ubuntu5 ProcVersionSignature: Ubuntu 5.3.0-19.20-generic 5.3.1 Uname: Linux 5.3.0-19-generic x86_64 ApportVersion: 2.20.11-0ubuntu8.2 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: martin 1383 F pulseaudio CurrentDesktop: ubuntu:GNOME Date: Wed Nov 6 06:20:08 2019 InstallationDate: Installed on 2019-11-03 (3 days ago) InstallationMedia: Ubuntu 19.10 "Eoan Ermine" - Release amd64 (20191017) PackageArchitecture: all ProcEnviron: TERM=xterm-256color PATH=(custom, no user) XDG_RUNTIME_DIR= LANG=en_US.UTF-8 SHELL=/bin/bash SourcePackage
[Touch-packages] [Bug 1851518] Re: [950SBE/951SBE, Realtek ALC298, Speaker, Internal] No sound on internal speakers, very very quiet on headphones
I have a very similar issue with another Samsung laptop: https://bugs.launchpad.net/ubuntu/+source/alsa-driver/+bug/1850702 -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to alsa-driver in Ubuntu. https://bugs.launchpad.net/bugs/1851518 Title: [950SBE/951SBE, Realtek ALC298, Speaker, Internal] No sound on internal speakers, very very quiet on headphones Status in alsa-driver package in Ubuntu: New Bug description: I've been googling this issue for 10's of hours and tried many things. Relase of Ubuntu: 19.10 Expected outcome: Music plays on the internal speakers and headphones. Actual outcome: I can barely hear audio using headphones with volume turned up to 150%. Absolutely nothing comes out of the speakers. (The speakers sound great under Windows 10.) Complete alsa-info output is attached, but here are some snippets: !!DMI Information !!--- Manufacturer: SAMSUNG ELECTRONICS CO., LTD. Product Name: 950SBE/951SBE Product Version: P06RES Firmware Version: P06RES.075.190529.SP Board Vendor: SAMSUNG ELECTRONICS CO., LTD. Board Name:NP950SBE-K01US !!Kernel Information !!-- Kernel release:5.3.0-19-generic Operating System: GNU/Linux Architecture: x86_64 Processor: x86_64 SMP Enabled: Yes !!ALSA Version !! Driver version: k5.3.0-19-generic Library version:1.1.9 Utilities version: 1.1.9 !!Loaded ALSA modules !!--- snd_hda_intel !!Sound Servers on this system !! Pulseaudio: Installed - Yes (/usr/bin/pulseaudio) Running - Yes !!Soundcards recognised by ALSA !!- 0 [PCH]: HDA-Intel - HDA Intel PCH HDA Intel PCH at 0x604b118000 irq 177 !!PCI Soundcards installed in the system !!-- 00:1f.3 Multimedia audio controller: Intel Corporation Cannon Point-LP High Definition Audio Controller (rev 11) !!Advanced information - PCI Vendor/Device/Subsystem ID's !!--- 00:1f.3 0401: 8086:9dc8 (rev 11) DeviceName: Onboard - Sound !!HDA-Intel Codec information !!--- --startcollapse-- Codec: Realtek ALC298 Address: 0 AFG Function Id: 0x1 (unsol 1) Vendor Id: 0x10ec0298 Subsystem Id: 0x144dc812 Revision Id: 0x100103 No Modem Function Group found Default PCM: rates [0x60]: 44100 48000 bits [0xe]: 16 20 24 formats [0x1]: PCM Default Amp-In caps: N/A Default Amp-Out caps: N/A State of AFG node 0x01: Power states: D0 D1 D2 D3 D3cold CLKSTOP EPSS Power: setting=D0, actual=D0 GPIO: io=8, o=0, i=0, unsolicited=1, wake=0 IO[0]: enable=0, dir=0, wake=0, sticky=0, data=0, unsol=0 IO[1]: enable=0, dir=0, wake=0, sticky=0, data=0, unsol=0 IO[2]: enable=0, dir=0, wake=0, sticky=0, data=0, unsol=0 IO[3]: enable=0, dir=0, wake=0, sticky=0, data=0, unsol=0 IO[4]: enable=0, dir=0, wake=0, sticky=0, data=0, unsol=0 IO[5]: enable=0, dir=0, wake=0, sticky=0, data=0, unsol=0 IO[6]: enable=0, dir=0, wake=0, sticky=0, data=0, unsol=0 IO[7]: enable=0, dir=0, wake=0, sticky=0, data=0, unsol=0 Node 0x02 [Audio Output] wcaps 0x41d: Stereo Amp-Out Control: name="Headphone Playback Volume", index=0, device=0 ControlAmp: chs=3, dir=Out, idx=0, ofs=0 Device: name="ALC298 Analog", type="Audio", device=0 Amp-Out caps: ofs=0x7f, nsteps=0x7f, stepsize=0x01, mute=0 Amp-Out vals: [0x00 0x00] Converter: stream=1, channel=0 PCM: rates [0x60]: 44100 48000 bits [0xe]: 16 20 24 formats [0x1]: PCM Power states: D0 D1 D2 D3 EPSS Power: setting=D0, actual=D0 Node 0x03 [Audio Output] wcaps 0x41d: Stereo Amp-Out Control: name="Speaker Playback Volume", index=0, device=0 ControlAmp: chs=3, dir=Out, idx=0, ofs=0 Amp-Out caps: ofs=0x7f, nsteps=0x7f, stepsize=0x01, mute=0 Amp-Out vals: [0x7f 0x7f] Converter: stream=1, channel=0 ProblemType: Bug DistroRelease: Ubuntu 19.10 Package: alsa-base 1.0.25+dfsg-0ubuntu5 ProcVersionSignature: Ubuntu 5.3.0-19.20-generic 5.3.1 Uname: Linux 5.3.0-19-generic x86_64 ApportVersion: 2.20.11-0ubuntu8.2 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: martin 1383 F pulseaudio CurrentDesktop: ubuntu:GNOME Date: Wed Nov 6 06:20:08 2019 InstallationDate: Installed on 2019-11-03 (3 days ago) InstallationMedia: Ubuntu 19.10 "Eoan Ermine" - Release amd64 (20191017) PackageArchitecture: all ProcEnviron: TERM=xterm-256color PATH=(custom, no user) XDG_RUNTIME_DIR= LANG=en_US.UTF-8 SHELL=/bin/bash SourcePackage: alsa-driver Symptom: audio Sympt