[Touch-packages] [Bug 1877194] Re: switch-on-connect mistakes startup for USB hotplug, so seemingly ignores the old default device on reboot
** Changed in: pulseaudio (Ubuntu) Assignee: Dave Jones (waveform) => (unassigned) -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to pulseaudio in Ubuntu. https://bugs.launchpad.net/bugs/1877194 Title: switch-on-connect mistakes startup for USB hotplug, so seemingly ignores the old default device on reboot Status in PulseAudio: New Status in pulseaudio package in Ubuntu: Triaged Status in ubuntu-settings package in Ubuntu: Invalid Status in pulseaudio source package in Jammy: Confirmed Status in ubuntu-settings source package in Jammy: Invalid Status in pulseaudio source package in Kinetic: Won't Fix Status in ubuntu-settings source package in Kinetic: Invalid Bug description: Similar to: https://bugs.launchpad.net/ubuntu/+source/pulseaudio/+bug/1847570 Only difference is that it does not reset to HDMI output, but to one of my USB-outputs. It does not respect the change I made after reboot. In short: 1. Boot system 2. "Analogue Output - RODE NT-USB" is selected by default. I want to use "Line Out - Built-in Audio", which I choose. 3. Reboot. 4 Output device is now back to "Analogue Output - RODE NT-USB". ProblemType: Bug DistroRelease: Ubuntu 20.04 Package: pulseaudio 1:13.99.1-1ubuntu3 ProcVersionSignature: Ubuntu 5.4.0-29.33-generic 5.4.30 Uname: Linux 5.4.0-29-generic x86_64 NonfreeKernelModules: nvidia_modeset nvidia ApportVersion: 2.20.11-0ubuntu27 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC2: marcus 1604 F pulseaudio /dev/snd/controlC0: marcus 1604 F pulseaudio /dev/snd/controlC1: marcus 1604 F pulseaudio /dev/snd/pcmC1D0c: marcus 1604 F...m pulseaudio CasperMD5CheckResult: skip CurrentDesktop: ubuntu:GNOME Date: Wed May 6 23:40:08 2020 InstallationDate: Installed on 2020-05-06 (0 days ago) InstallationMedia: Ubuntu 20.04 LTS "Focal Fossa" - Release amd64 (20200423) SourcePackage: pulseaudio UpgradeStatus: No upgrade log present (probably fresh install) dmi.bios.date: 12/27/2017 dmi.bios.vendor: American Megatrends Inc. dmi.bios.version: 3703 dmi.board.asset.tag: Default string dmi.board.name: MAXIMUS VIII HERO dmi.board.vendor: ASUSTeK COMPUTER INC. dmi.board.version: Rev 1.xx dmi.chassis.asset.tag: Default string dmi.chassis.type: 3 dmi.chassis.vendor: Default string dmi.chassis.version: Default string dmi.modalias: dmi:bvnAmericanMegatrendsInc.:bvr3703:bd12/27/2017:svnSystemmanufacturer:pnSystemProductName:pvrSystemVersion:rvnASUSTeKCOMPUTERINC.:rnMAXIMUSVIIIHERO:rvrRev1.xx:cvnDefaultstring:ct3:cvrDefaultstring: dmi.product.family: To be filled by O.E.M. dmi.product.name: System Product Name dmi.product.sku: SKU dmi.product.version: System Version dmi.sys.vendor: System manufacturer To manage notifications about this bug go to: https://bugs.launchpad.net/pulseaudio/+bug/1877194/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1877194] Re: switch-on-connect mistakes startup for USB hotplug, so seemingly ignores the old default device on reboot
** Changed in: ubuntu-settings (Ubuntu) Status: Confirmed => Invalid ** Changed in: ubuntu-settings (Ubuntu Jammy) Status: New => Invalid ** Changed in: ubuntu-settings (Ubuntu Kinetic) Status: Confirmed => Invalid ** Changed in: pulseaudio (Ubuntu Jammy) Status: New => Confirmed ** Changed in: pulseaudio (Ubuntu Kinetic) Assignee: Dave Jones (waveform) => (unassigned) ** Changed in: ubuntu-settings (Ubuntu) Assignee: Dave Jones (waveform) => (unassigned) ** Changed in: ubuntu-settings (Ubuntu Kinetic) Assignee: Dave Jones (waveform) => (unassigned) -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to pulseaudio in Ubuntu. https://bugs.launchpad.net/bugs/1877194 Title: switch-on-connect mistakes startup for USB hotplug, so seemingly ignores the old default device on reboot Status in PulseAudio: New Status in pulseaudio package in Ubuntu: Triaged Status in ubuntu-settings package in Ubuntu: Invalid Status in pulseaudio source package in Jammy: Confirmed Status in ubuntu-settings source package in Jammy: Invalid Status in pulseaudio source package in Kinetic: Won't Fix Status in ubuntu-settings source package in Kinetic: Invalid Bug description: Similar to: https://bugs.launchpad.net/ubuntu/+source/pulseaudio/+bug/1847570 Only difference is that it does not reset to HDMI output, but to one of my USB-outputs. It does not respect the change I made after reboot. In short: 1. Boot system 2. "Analogue Output - RODE NT-USB" is selected by default. I want to use "Line Out - Built-in Audio", which I choose. 3. Reboot. 4 Output device is now back to "Analogue Output - RODE NT-USB". ProblemType: Bug DistroRelease: Ubuntu 20.04 Package: pulseaudio 1:13.99.1-1ubuntu3 ProcVersionSignature: Ubuntu 5.4.0-29.33-generic 5.4.30 Uname: Linux 5.4.0-29-generic x86_64 NonfreeKernelModules: nvidia_modeset nvidia ApportVersion: 2.20.11-0ubuntu27 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC2: marcus 1604 F pulseaudio /dev/snd/controlC0: marcus 1604 F pulseaudio /dev/snd/controlC1: marcus 1604 F pulseaudio /dev/snd/pcmC1D0c: marcus 1604 F...m pulseaudio CasperMD5CheckResult: skip CurrentDesktop: ubuntu:GNOME Date: Wed May 6 23:40:08 2020 InstallationDate: Installed on 2020-05-06 (0 days ago) InstallationMedia: Ubuntu 20.04 LTS "Focal Fossa" - Release amd64 (20200423) SourcePackage: pulseaudio UpgradeStatus: No upgrade log present (probably fresh install) dmi.bios.date: 12/27/2017 dmi.bios.vendor: American Megatrends Inc. dmi.bios.version: 3703 dmi.board.asset.tag: Default string dmi.board.name: MAXIMUS VIII HERO dmi.board.vendor: ASUSTeK COMPUTER INC. dmi.board.version: Rev 1.xx dmi.chassis.asset.tag: Default string dmi.chassis.type: 3 dmi.chassis.vendor: Default string dmi.chassis.version: Default string dmi.modalias: dmi:bvnAmericanMegatrendsInc.:bvr3703:bd12/27/2017:svnSystemmanufacturer:pnSystemProductName:pvrSystemVersion:rvnASUSTeKCOMPUTERINC.:rnMAXIMUSVIIIHERO:rvrRev1.xx:cvnDefaultstring:ct3:cvrDefaultstring: dmi.product.family: To be filled by O.E.M. dmi.product.name: System Product Name dmi.product.sku: SKU dmi.product.version: System Version dmi.sys.vendor: System manufacturer To manage notifications about this bug go to: https://bugs.launchpad.net/pulseaudio/+bug/1877194/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1877194] Re: switch-on-connect mistakes startup for USB hotplug, so seemingly ignores the old default device on reboot
Still a problem on jammy, and removing switch-on-connect does fix things there. The result of that change is that plugging in a new (never seen before) USB device does *not* automatically switch to it, but once the device has been selected as the output, it will subsequently be automatically selected when plugged in (or at least that's my experience on my PC). And it also clears up the "always selects headphones output" issue on the Pi. I'll target this to jammy given we're still getting duplicate reports about it (LP: #1995459 is the latest) ** Also affects: pulseaudio (Ubuntu Jammy) Importance: Undecided Status: New ** Also affects: ubuntu-settings (Ubuntu Jammy) Importance: Undecided Status: New -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to pulseaudio in Ubuntu. https://bugs.launchpad.net/bugs/1877194 Title: switch-on-connect mistakes startup for USB hotplug, so seemingly ignores the old default device on reboot Status in PulseAudio: New Status in pulseaudio package in Ubuntu: Triaged Status in ubuntu-settings package in Ubuntu: Confirmed Status in pulseaudio source package in Jammy: New Status in ubuntu-settings source package in Jammy: New Status in pulseaudio source package in Kinetic: Won't Fix Status in ubuntu-settings source package in Kinetic: Confirmed Bug description: Similar to: https://bugs.launchpad.net/ubuntu/+source/pulseaudio/+bug/1847570 Only difference is that it does not reset to HDMI output, but to one of my USB-outputs. It does not respect the change I made after reboot. In short: 1. Boot system 2. "Analogue Output - RODE NT-USB" is selected by default. I want to use "Line Out - Built-in Audio", which I choose. 3. Reboot. 4 Output device is now back to "Analogue Output - RODE NT-USB". ProblemType: Bug DistroRelease: Ubuntu 20.04 Package: pulseaudio 1:13.99.1-1ubuntu3 ProcVersionSignature: Ubuntu 5.4.0-29.33-generic 5.4.30 Uname: Linux 5.4.0-29-generic x86_64 NonfreeKernelModules: nvidia_modeset nvidia ApportVersion: 2.20.11-0ubuntu27 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC2: marcus 1604 F pulseaudio /dev/snd/controlC0: marcus 1604 F pulseaudio /dev/snd/controlC1: marcus 1604 F pulseaudio /dev/snd/pcmC1D0c: marcus 1604 F...m pulseaudio CasperMD5CheckResult: skip CurrentDesktop: ubuntu:GNOME Date: Wed May 6 23:40:08 2020 InstallationDate: Installed on 2020-05-06 (0 days ago) InstallationMedia: Ubuntu 20.04 LTS "Focal Fossa" - Release amd64 (20200423) SourcePackage: pulseaudio UpgradeStatus: No upgrade log present (probably fresh install) dmi.bios.date: 12/27/2017 dmi.bios.vendor: American Megatrends Inc. dmi.bios.version: 3703 dmi.board.asset.tag: Default string dmi.board.name: MAXIMUS VIII HERO dmi.board.vendor: ASUSTeK COMPUTER INC. dmi.board.version: Rev 1.xx dmi.chassis.asset.tag: Default string dmi.chassis.type: 3 dmi.chassis.vendor: Default string dmi.chassis.version: Default string dmi.modalias: dmi:bvnAmericanMegatrendsInc.:bvr3703:bd12/27/2017:svnSystemmanufacturer:pnSystemProductName:pvrSystemVersion:rvnASUSTeKCOMPUTERINC.:rnMAXIMUSVIIIHERO:rvrRev1.xx:cvnDefaultstring:ct3:cvrDefaultstring: dmi.product.family: To be filled by O.E.M. dmi.product.name: System Product Name dmi.product.sku: SKU dmi.product.version: System Version dmi.sys.vendor: System manufacturer To manage notifications about this bug go to: https://bugs.launchpad.net/pulseaudio/+bug/1877194/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1877194] Re: switch-on-connect mistakes startup for USB hotplug, so seemingly ignores the old default device on reboot
Status changed to 'Confirmed' because the bug affects multiple users. ** Changed in: ubuntu-settings (Ubuntu) Status: New => Confirmed -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to pulseaudio in Ubuntu. https://bugs.launchpad.net/bugs/1877194 Title: switch-on-connect mistakes startup for USB hotplug, so seemingly ignores the old default device on reboot Status in PulseAudio: New Status in pulseaudio package in Ubuntu: Triaged Status in ubuntu-settings package in Ubuntu: Confirmed Status in pulseaudio source package in Kinetic: Won't Fix Status in ubuntu-settings source package in Kinetic: Confirmed Bug description: Similar to: https://bugs.launchpad.net/ubuntu/+source/pulseaudio/+bug/1847570 Only difference is that it does not reset to HDMI output, but to one of my USB-outputs. It does not respect the change I made after reboot. In short: 1. Boot system 2. "Analogue Output - RODE NT-USB" is selected by default. I want to use "Line Out - Built-in Audio", which I choose. 3. Reboot. 4 Output device is now back to "Analogue Output - RODE NT-USB". ProblemType: Bug DistroRelease: Ubuntu 20.04 Package: pulseaudio 1:13.99.1-1ubuntu3 ProcVersionSignature: Ubuntu 5.4.0-29.33-generic 5.4.30 Uname: Linux 5.4.0-29-generic x86_64 NonfreeKernelModules: nvidia_modeset nvidia ApportVersion: 2.20.11-0ubuntu27 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC2: marcus 1604 F pulseaudio /dev/snd/controlC0: marcus 1604 F pulseaudio /dev/snd/controlC1: marcus 1604 F pulseaudio /dev/snd/pcmC1D0c: marcus 1604 F...m pulseaudio CasperMD5CheckResult: skip CurrentDesktop: ubuntu:GNOME Date: Wed May 6 23:40:08 2020 InstallationDate: Installed on 2020-05-06 (0 days ago) InstallationMedia: Ubuntu 20.04 LTS "Focal Fossa" - Release amd64 (20200423) SourcePackage: pulseaudio UpgradeStatus: No upgrade log present (probably fresh install) dmi.bios.date: 12/27/2017 dmi.bios.vendor: American Megatrends Inc. dmi.bios.version: 3703 dmi.board.asset.tag: Default string dmi.board.name: MAXIMUS VIII HERO dmi.board.vendor: ASUSTeK COMPUTER INC. dmi.board.version: Rev 1.xx dmi.chassis.asset.tag: Default string dmi.chassis.type: 3 dmi.chassis.vendor: Default string dmi.chassis.version: Default string dmi.modalias: dmi:bvnAmericanMegatrendsInc.:bvr3703:bd12/27/2017:svnSystemmanufacturer:pnSystemProductName:pvrSystemVersion:rvnASUSTeKCOMPUTERINC.:rnMAXIMUSVIIIHERO:rvrRev1.xx:cvnDefaultstring:ct3:cvrDefaultstring: dmi.product.family: To be filled by O.E.M. dmi.product.name: System Product Name dmi.product.sku: SKU dmi.product.version: System Version dmi.sys.vendor: System manufacturer To manage notifications about this bug go to: https://bugs.launchpad.net/pulseaudio/+bug/1877194/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1877194] Re: switch-on-connect mistakes startup for USB hotplug, so seemingly ignores the old default device on reboot
We don't need to check. "switch-on-connect" is a feature of PulseAudio only. Even if a similar bug was ever seen in PipeWire, it would get a seperate bug report. ** Changed in: pulseaudio (Ubuntu Kinetic) Status: Triaged => Won't Fix -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to pulseaudio in Ubuntu. https://bugs.launchpad.net/bugs/1877194 Title: switch-on-connect mistakes startup for USB hotplug, so seemingly ignores the old default device on reboot Status in PulseAudio: New Status in pulseaudio package in Ubuntu: Triaged Status in ubuntu-settings package in Ubuntu: New Status in pulseaudio source package in Kinetic: Won't Fix Status in ubuntu-settings source package in Kinetic: New Bug description: Similar to: https://bugs.launchpad.net/ubuntu/+source/pulseaudio/+bug/1847570 Only difference is that it does not reset to HDMI output, but to one of my USB-outputs. It does not respect the change I made after reboot. In short: 1. Boot system 2. "Analogue Output - RODE NT-USB" is selected by default. I want to use "Line Out - Built-in Audio", which I choose. 3. Reboot. 4 Output device is now back to "Analogue Output - RODE NT-USB". ProblemType: Bug DistroRelease: Ubuntu 20.04 Package: pulseaudio 1:13.99.1-1ubuntu3 ProcVersionSignature: Ubuntu 5.4.0-29.33-generic 5.4.30 Uname: Linux 5.4.0-29-generic x86_64 NonfreeKernelModules: nvidia_modeset nvidia ApportVersion: 2.20.11-0ubuntu27 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC2: marcus 1604 F pulseaudio /dev/snd/controlC0: marcus 1604 F pulseaudio /dev/snd/controlC1: marcus 1604 F pulseaudio /dev/snd/pcmC1D0c: marcus 1604 F...m pulseaudio CasperMD5CheckResult: skip CurrentDesktop: ubuntu:GNOME Date: Wed May 6 23:40:08 2020 InstallationDate: Installed on 2020-05-06 (0 days ago) InstallationMedia: Ubuntu 20.04 LTS "Focal Fossa" - Release amd64 (20200423) SourcePackage: pulseaudio UpgradeStatus: No upgrade log present (probably fresh install) dmi.bios.date: 12/27/2017 dmi.bios.vendor: American Megatrends Inc. dmi.bios.version: 3703 dmi.board.asset.tag: Default string dmi.board.name: MAXIMUS VIII HERO dmi.board.vendor: ASUSTeK COMPUTER INC. dmi.board.version: Rev 1.xx dmi.chassis.asset.tag: Default string dmi.chassis.type: 3 dmi.chassis.vendor: Default string dmi.chassis.version: Default string dmi.modalias: dmi:bvnAmericanMegatrendsInc.:bvr3703:bd12/27/2017:svnSystemmanufacturer:pnSystemProductName:pvrSystemVersion:rvnASUSTeKCOMPUTERINC.:rnMAXIMUSVIIIHERO:rvrRev1.xx:cvnDefaultstring:ct3:cvrDefaultstring: dmi.product.family: To be filled by O.E.M. dmi.product.name: System Product Name dmi.product.sku: SKU dmi.product.version: System Version dmi.sys.vendor: System manufacturer To manage notifications about this bug go to: https://bugs.launchpad.net/pulseaudio/+bug/1877194/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1877194] Re: switch-on-connect mistakes startup for USB hotplug, so seemingly ignores the old default device on reboot
@seb128 tested with pipewire on kinetic with a Pi 4B and it correctly selects the HDMI out by default both on initial setup and after a few reboots. So, looks like this could be "invalid" on kinetic, at least for the Raspberry Pi case. Would be useful to double-check that on PC hardware too, obviously. -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to pulseaudio in Ubuntu. https://bugs.launchpad.net/bugs/1877194 Title: switch-on-connect mistakes startup for USB hotplug, so seemingly ignores the old default device on reboot Status in PulseAudio: New Status in pulseaudio package in Ubuntu: Triaged Status in ubuntu-settings package in Ubuntu: New Status in pulseaudio source package in Kinetic: Triaged Status in ubuntu-settings source package in Kinetic: New Bug description: Similar to: https://bugs.launchpad.net/ubuntu/+source/pulseaudio/+bug/1847570 Only difference is that it does not reset to HDMI output, but to one of my USB-outputs. It does not respect the change I made after reboot. In short: 1. Boot system 2. "Analogue Output - RODE NT-USB" is selected by default. I want to use "Line Out - Built-in Audio", which I choose. 3. Reboot. 4 Output device is now back to "Analogue Output - RODE NT-USB". ProblemType: Bug DistroRelease: Ubuntu 20.04 Package: pulseaudio 1:13.99.1-1ubuntu3 ProcVersionSignature: Ubuntu 5.4.0-29.33-generic 5.4.30 Uname: Linux 5.4.0-29-generic x86_64 NonfreeKernelModules: nvidia_modeset nvidia ApportVersion: 2.20.11-0ubuntu27 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC2: marcus 1604 F pulseaudio /dev/snd/controlC0: marcus 1604 F pulseaudio /dev/snd/controlC1: marcus 1604 F pulseaudio /dev/snd/pcmC1D0c: marcus 1604 F...m pulseaudio CasperMD5CheckResult: skip CurrentDesktop: ubuntu:GNOME Date: Wed May 6 23:40:08 2020 InstallationDate: Installed on 2020-05-06 (0 days ago) InstallationMedia: Ubuntu 20.04 LTS "Focal Fossa" - Release amd64 (20200423) SourcePackage: pulseaudio UpgradeStatus: No upgrade log present (probably fresh install) dmi.bios.date: 12/27/2017 dmi.bios.vendor: American Megatrends Inc. dmi.bios.version: 3703 dmi.board.asset.tag: Default string dmi.board.name: MAXIMUS VIII HERO dmi.board.vendor: ASUSTeK COMPUTER INC. dmi.board.version: Rev 1.xx dmi.chassis.asset.tag: Default string dmi.chassis.type: 3 dmi.chassis.vendor: Default string dmi.chassis.version: Default string dmi.modalias: dmi:bvnAmericanMegatrendsInc.:bvr3703:bd12/27/2017:svnSystemmanufacturer:pnSystemProductName:pvrSystemVersion:rvnASUSTeKCOMPUTERINC.:rnMAXIMUSVIIIHERO:rvrRev1.xx:cvnDefaultstring:ct3:cvrDefaultstring: dmi.product.family: To be filled by O.E.M. dmi.product.name: System Product Name dmi.product.sku: SKU dmi.product.version: System Version dmi.sys.vendor: System manufacturer To manage notifications about this bug go to: https://bugs.launchpad.net/pulseaudio/+bug/1877194/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1877194] Re: switch-on-connect mistakes startup for USB hotplug, so seemingly ignores the old default device on reboot
** Tags removed: rls-jj-incoming -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to pulseaudio in Ubuntu. https://bugs.launchpad.net/bugs/1877194 Title: switch-on-connect mistakes startup for USB hotplug, so seemingly ignores the old default device on reboot Status in PulseAudio: New Status in pulseaudio package in Ubuntu: Triaged Status in ubuntu-settings package in Ubuntu: New Status in pulseaudio source package in Kinetic: Triaged Status in ubuntu-settings source package in Kinetic: New Bug description: Similar to: https://bugs.launchpad.net/ubuntu/+source/pulseaudio/+bug/1847570 Only difference is that it does not reset to HDMI output, but to one of my USB-outputs. It does not respect the change I made after reboot. In short: 1. Boot system 2. "Analogue Output - RODE NT-USB" is selected by default. I want to use "Line Out - Built-in Audio", which I choose. 3. Reboot. 4 Output device is now back to "Analogue Output - RODE NT-USB". ProblemType: Bug DistroRelease: Ubuntu 20.04 Package: pulseaudio 1:13.99.1-1ubuntu3 ProcVersionSignature: Ubuntu 5.4.0-29.33-generic 5.4.30 Uname: Linux 5.4.0-29-generic x86_64 NonfreeKernelModules: nvidia_modeset nvidia ApportVersion: 2.20.11-0ubuntu27 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC2: marcus 1604 F pulseaudio /dev/snd/controlC0: marcus 1604 F pulseaudio /dev/snd/controlC1: marcus 1604 F pulseaudio /dev/snd/pcmC1D0c: marcus 1604 F...m pulseaudio CasperMD5CheckResult: skip CurrentDesktop: ubuntu:GNOME Date: Wed May 6 23:40:08 2020 InstallationDate: Installed on 2020-05-06 (0 days ago) InstallationMedia: Ubuntu 20.04 LTS "Focal Fossa" - Release amd64 (20200423) SourcePackage: pulseaudio UpgradeStatus: No upgrade log present (probably fresh install) dmi.bios.date: 12/27/2017 dmi.bios.vendor: American Megatrends Inc. dmi.bios.version: 3703 dmi.board.asset.tag: Default string dmi.board.name: MAXIMUS VIII HERO dmi.board.vendor: ASUSTeK COMPUTER INC. dmi.board.version: Rev 1.xx dmi.chassis.asset.tag: Default string dmi.chassis.type: 3 dmi.chassis.vendor: Default string dmi.chassis.version: Default string dmi.modalias: dmi:bvnAmericanMegatrendsInc.:bvr3703:bd12/27/2017:svnSystemmanufacturer:pnSystemProductName:pvrSystemVersion:rvnASUSTeKCOMPUTERINC.:rnMAXIMUSVIIIHERO:rvrRev1.xx:cvnDefaultstring:ct3:cvrDefaultstring: dmi.product.family: To be filled by O.E.M. dmi.product.name: System Product Name dmi.product.sku: SKU dmi.product.version: System Version dmi.sys.vendor: System manufacturer To manage notifications about this bug go to: https://bugs.launchpad.net/pulseaudio/+bug/1877194/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1877194] Re: switch-on-connect mistakes startup for USB hotplug, so seemingly ignores the old default device on reboot
switch-on-connect is a feature of PulseAudio only so we should probably say "Won't Fix" in kinetic. -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to pulseaudio in Ubuntu. https://bugs.launchpad.net/bugs/1877194 Title: switch-on-connect mistakes startup for USB hotplug, so seemingly ignores the old default device on reboot Status in PulseAudio: New Status in pulseaudio package in Ubuntu: Triaged Status in ubuntu-settings package in Ubuntu: New Status in pulseaudio source package in Kinetic: Triaged Status in ubuntu-settings source package in Kinetic: New Bug description: Similar to: https://bugs.launchpad.net/ubuntu/+source/pulseaudio/+bug/1847570 Only difference is that it does not reset to HDMI output, but to one of my USB-outputs. It does not respect the change I made after reboot. In short: 1. Boot system 2. "Analogue Output - RODE NT-USB" is selected by default. I want to use "Line Out - Built-in Audio", which I choose. 3. Reboot. 4 Output device is now back to "Analogue Output - RODE NT-USB". ProblemType: Bug DistroRelease: Ubuntu 20.04 Package: pulseaudio 1:13.99.1-1ubuntu3 ProcVersionSignature: Ubuntu 5.4.0-29.33-generic 5.4.30 Uname: Linux 5.4.0-29-generic x86_64 NonfreeKernelModules: nvidia_modeset nvidia ApportVersion: 2.20.11-0ubuntu27 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC2: marcus 1604 F pulseaudio /dev/snd/controlC0: marcus 1604 F pulseaudio /dev/snd/controlC1: marcus 1604 F pulseaudio /dev/snd/pcmC1D0c: marcus 1604 F...m pulseaudio CasperMD5CheckResult: skip CurrentDesktop: ubuntu:GNOME Date: Wed May 6 23:40:08 2020 InstallationDate: Installed on 2020-05-06 (0 days ago) InstallationMedia: Ubuntu 20.04 LTS "Focal Fossa" - Release amd64 (20200423) SourcePackage: pulseaudio UpgradeStatus: No upgrade log present (probably fresh install) dmi.bios.date: 12/27/2017 dmi.bios.vendor: American Megatrends Inc. dmi.bios.version: 3703 dmi.board.asset.tag: Default string dmi.board.name: MAXIMUS VIII HERO dmi.board.vendor: ASUSTeK COMPUTER INC. dmi.board.version: Rev 1.xx dmi.chassis.asset.tag: Default string dmi.chassis.type: 3 dmi.chassis.vendor: Default string dmi.chassis.version: Default string dmi.modalias: dmi:bvnAmericanMegatrendsInc.:bvr3703:bd12/27/2017:svnSystemmanufacturer:pnSystemProductName:pvrSystemVersion:rvnASUSTeKCOMPUTERINC.:rnMAXIMUSVIIIHERO:rvrRev1.xx:cvnDefaultstring:ct3:cvrDefaultstring: dmi.product.family: To be filled by O.E.M. dmi.product.name: System Product Name dmi.product.sku: SKU dmi.product.version: System Version dmi.sys.vendor: System manufacturer To manage notifications about this bug go to: https://bugs.launchpad.net/pulseaudio/+bug/1877194/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1877194] Re: switch-on-connect mistakes startup for USB hotplug, so seemingly ignores the old default device on reboot
Kinetic is switching to pipewire, unsure if the issue is already there with it, could someone try? ** Changed in: pulseaudio (Ubuntu Kinetic) Assignee: (unassigned) => Dave Jones (waveform) -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to pulseaudio in Ubuntu. https://bugs.launchpad.net/bugs/1877194 Title: switch-on-connect mistakes startup for USB hotplug, so seemingly ignores the old default device on reboot Status in PulseAudio: New Status in pulseaudio package in Ubuntu: Triaged Status in ubuntu-settings package in Ubuntu: New Status in pulseaudio source package in Kinetic: Triaged Status in ubuntu-settings source package in Kinetic: New Bug description: Similar to: https://bugs.launchpad.net/ubuntu/+source/pulseaudio/+bug/1847570 Only difference is that it does not reset to HDMI output, but to one of my USB-outputs. It does not respect the change I made after reboot. In short: 1. Boot system 2. "Analogue Output - RODE NT-USB" is selected by default. I want to use "Line Out - Built-in Audio", which I choose. 3. Reboot. 4 Output device is now back to "Analogue Output - RODE NT-USB". ProblemType: Bug DistroRelease: Ubuntu 20.04 Package: pulseaudio 1:13.99.1-1ubuntu3 ProcVersionSignature: Ubuntu 5.4.0-29.33-generic 5.4.30 Uname: Linux 5.4.0-29-generic x86_64 NonfreeKernelModules: nvidia_modeset nvidia ApportVersion: 2.20.11-0ubuntu27 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC2: marcus 1604 F pulseaudio /dev/snd/controlC0: marcus 1604 F pulseaudio /dev/snd/controlC1: marcus 1604 F pulseaudio /dev/snd/pcmC1D0c: marcus 1604 F...m pulseaudio CasperMD5CheckResult: skip CurrentDesktop: ubuntu:GNOME Date: Wed May 6 23:40:08 2020 InstallationDate: Installed on 2020-05-06 (0 days ago) InstallationMedia: Ubuntu 20.04 LTS "Focal Fossa" - Release amd64 (20200423) SourcePackage: pulseaudio UpgradeStatus: No upgrade log present (probably fresh install) dmi.bios.date: 12/27/2017 dmi.bios.vendor: American Megatrends Inc. dmi.bios.version: 3703 dmi.board.asset.tag: Default string dmi.board.name: MAXIMUS VIII HERO dmi.board.vendor: ASUSTeK COMPUTER INC. dmi.board.version: Rev 1.xx dmi.chassis.asset.tag: Default string dmi.chassis.type: 3 dmi.chassis.vendor: Default string dmi.chassis.version: Default string dmi.modalias: dmi:bvnAmericanMegatrendsInc.:bvr3703:bd12/27/2017:svnSystemmanufacturer:pnSystemProductName:pvrSystemVersion:rvnASUSTeKCOMPUTERINC.:rnMAXIMUSVIIIHERO:rvrRev1.xx:cvnDefaultstring:ct3:cvrDefaultstring: dmi.product.family: To be filled by O.E.M. dmi.product.name: System Product Name dmi.product.sku: SKU dmi.product.version: System Version dmi.sys.vendor: System manufacturer To manage notifications about this bug go to: https://bugs.launchpad.net/pulseaudio/+bug/1877194/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1877194] Re: switch-on-connect mistakes startup for USB hotplug, so seemingly ignores the old default device on reboot
** Changed in: pulseaudio Status: Unknown => New -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to pulseaudio in Ubuntu. https://bugs.launchpad.net/bugs/1877194 Title: switch-on-connect mistakes startup for USB hotplug, so seemingly ignores the old default device on reboot Status in PulseAudio: New Status in pulseaudio package in Ubuntu: Triaged Status in ubuntu-settings package in Ubuntu: New Status in pulseaudio source package in Kinetic: Triaged Status in ubuntu-settings source package in Kinetic: New Bug description: Similar to: https://bugs.launchpad.net/ubuntu/+source/pulseaudio/+bug/1847570 Only difference is that it does not reset to HDMI output, but to one of my USB-outputs. It does not respect the change I made after reboot. In short: 1. Boot system 2. "Analogue Output - RODE NT-USB" is selected by default. I want to use "Line Out - Built-in Audio", which I choose. 3. Reboot. 4 Output device is now back to "Analogue Output - RODE NT-USB". ProblemType: Bug DistroRelease: Ubuntu 20.04 Package: pulseaudio 1:13.99.1-1ubuntu3 ProcVersionSignature: Ubuntu 5.4.0-29.33-generic 5.4.30 Uname: Linux 5.4.0-29-generic x86_64 NonfreeKernelModules: nvidia_modeset nvidia ApportVersion: 2.20.11-0ubuntu27 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC2: marcus 1604 F pulseaudio /dev/snd/controlC0: marcus 1604 F pulseaudio /dev/snd/controlC1: marcus 1604 F pulseaudio /dev/snd/pcmC1D0c: marcus 1604 F...m pulseaudio CasperMD5CheckResult: skip CurrentDesktop: ubuntu:GNOME Date: Wed May 6 23:40:08 2020 InstallationDate: Installed on 2020-05-06 (0 days ago) InstallationMedia: Ubuntu 20.04 LTS "Focal Fossa" - Release amd64 (20200423) SourcePackage: pulseaudio UpgradeStatus: No upgrade log present (probably fresh install) dmi.bios.date: 12/27/2017 dmi.bios.vendor: American Megatrends Inc. dmi.bios.version: 3703 dmi.board.asset.tag: Default string dmi.board.name: MAXIMUS VIII HERO dmi.board.vendor: ASUSTeK COMPUTER INC. dmi.board.version: Rev 1.xx dmi.chassis.asset.tag: Default string dmi.chassis.type: 3 dmi.chassis.vendor: Default string dmi.chassis.version: Default string dmi.modalias: dmi:bvnAmericanMegatrendsInc.:bvr3703:bd12/27/2017:svnSystemmanufacturer:pnSystemProductName:pvrSystemVersion:rvnASUSTeKCOMPUTERINC.:rnMAXIMUSVIIIHERO:rvrRev1.xx:cvnDefaultstring:ct3:cvrDefaultstring: dmi.product.family: To be filled by O.E.M. dmi.product.name: System Product Name dmi.product.sku: SKU dmi.product.version: System Version dmi.sys.vendor: System manufacturer To manage notifications about this bug go to: https://bugs.launchpad.net/pulseaudio/+bug/1877194/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1877194] Re: switch-on-connect mistakes startup for USB hotplug, so seemingly ignores the old default device on reboot
I'm not sure we even need switch-on-connect anymore. It was introduced as a patch in 2017 (bug 1702794) at the request of Will Cooke but I suspect later upstream changes within the module logic like module- switch-on-port-available might suffice now. -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to pulseaudio in Ubuntu. https://bugs.launchpad.net/bugs/1877194 Title: switch-on-connect mistakes startup for USB hotplug, so seemingly ignores the old default device on reboot Status in PulseAudio: Unknown Status in pulseaudio package in Ubuntu: Triaged Status in ubuntu-settings package in Ubuntu: New Status in pulseaudio source package in Kinetic: Triaged Status in ubuntu-settings source package in Kinetic: New Bug description: Similar to: https://bugs.launchpad.net/ubuntu/+source/pulseaudio/+bug/1847570 Only difference is that it does not reset to HDMI output, but to one of my USB-outputs. It does not respect the change I made after reboot. In short: 1. Boot system 2. "Analogue Output - RODE NT-USB" is selected by default. I want to use "Line Out - Built-in Audio", which I choose. 3. Reboot. 4 Output device is now back to "Analogue Output - RODE NT-USB". ProblemType: Bug DistroRelease: Ubuntu 20.04 Package: pulseaudio 1:13.99.1-1ubuntu3 ProcVersionSignature: Ubuntu 5.4.0-29.33-generic 5.4.30 Uname: Linux 5.4.0-29-generic x86_64 NonfreeKernelModules: nvidia_modeset nvidia ApportVersion: 2.20.11-0ubuntu27 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC2: marcus 1604 F pulseaudio /dev/snd/controlC0: marcus 1604 F pulseaudio /dev/snd/controlC1: marcus 1604 F pulseaudio /dev/snd/pcmC1D0c: marcus 1604 F...m pulseaudio CasperMD5CheckResult: skip CurrentDesktop: ubuntu:GNOME Date: Wed May 6 23:40:08 2020 InstallationDate: Installed on 2020-05-06 (0 days ago) InstallationMedia: Ubuntu 20.04 LTS "Focal Fossa" - Release amd64 (20200423) SourcePackage: pulseaudio UpgradeStatus: No upgrade log present (probably fresh install) dmi.bios.date: 12/27/2017 dmi.bios.vendor: American Megatrends Inc. dmi.bios.version: 3703 dmi.board.asset.tag: Default string dmi.board.name: MAXIMUS VIII HERO dmi.board.vendor: ASUSTeK COMPUTER INC. dmi.board.version: Rev 1.xx dmi.chassis.asset.tag: Default string dmi.chassis.type: 3 dmi.chassis.vendor: Default string dmi.chassis.version: Default string dmi.modalias: dmi:bvnAmericanMegatrendsInc.:bvr3703:bd12/27/2017:svnSystemmanufacturer:pnSystemProductName:pvrSystemVersion:rvnASUSTeKCOMPUTERINC.:rnMAXIMUSVIIIHERO:rvrRev1.xx:cvnDefaultstring:ct3:cvrDefaultstring: dmi.product.family: To be filled by O.E.M. dmi.product.name: System Product Name dmi.product.sku: SKU dmi.product.version: System Version dmi.sys.vendor: System manufacturer To manage notifications about this bug go to: https://bugs.launchpad.net/pulseaudio/+bug/1877194/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1877194] Re: switch-on-connect mistakes startup for USB hotplug, so seemingly ignores the old default device on reboot
This behavior particularly affects Raspberry Pis, where USB is the only bus available for a lot of devices and treating this as "hotplug" gives wrong results. That doesn't mean the default should change for pulseaudio on the desktop in general, but should somehow be treated in a hardware-specific manner. I would suggest making /etc/pulse/default.pa key its loading of module- switch-on-connect on the absence of a flag file, which could then be provided by raspberry pi images. I'm going to open a task on ubuntu-settings for the moment, since it provides ubuntu-raspi-settings that seems the most likely existing package to attach the raspi side of this to. ** Also affects: ubuntu-settings (Ubuntu) Importance: Undecided Status: New ** Changed in: ubuntu-settings (Ubuntu) Assignee: (unassigned) => Dave Jones (waveform) ** Also affects: pulseaudio (Ubuntu Kinetic) Importance: Low Status: Triaged ** Also affects: ubuntu-settings (Ubuntu Kinetic) Importance: Undecided Assignee: Dave Jones (waveform) Status: New ** Tags added: rls-jj-incoming -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to pulseaudio in Ubuntu. https://bugs.launchpad.net/bugs/1877194 Title: switch-on-connect mistakes startup for USB hotplug, so seemingly ignores the old default device on reboot Status in PulseAudio: Unknown Status in pulseaudio package in Ubuntu: Triaged Status in ubuntu-settings package in Ubuntu: New Status in pulseaudio source package in Kinetic: Triaged Status in ubuntu-settings source package in Kinetic: New Bug description: Similar to: https://bugs.launchpad.net/ubuntu/+source/pulseaudio/+bug/1847570 Only difference is that it does not reset to HDMI output, but to one of my USB-outputs. It does not respect the change I made after reboot. In short: 1. Boot system 2. "Analogue Output - RODE NT-USB" is selected by default. I want to use "Line Out - Built-in Audio", which I choose. 3. Reboot. 4 Output device is now back to "Analogue Output - RODE NT-USB". ProblemType: Bug DistroRelease: Ubuntu 20.04 Package: pulseaudio 1:13.99.1-1ubuntu3 ProcVersionSignature: Ubuntu 5.4.0-29.33-generic 5.4.30 Uname: Linux 5.4.0-29-generic x86_64 NonfreeKernelModules: nvidia_modeset nvidia ApportVersion: 2.20.11-0ubuntu27 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC2: marcus 1604 F pulseaudio /dev/snd/controlC0: marcus 1604 F pulseaudio /dev/snd/controlC1: marcus 1604 F pulseaudio /dev/snd/pcmC1D0c: marcus 1604 F...m pulseaudio CasperMD5CheckResult: skip CurrentDesktop: ubuntu:GNOME Date: Wed May 6 23:40:08 2020 InstallationDate: Installed on 2020-05-06 (0 days ago) InstallationMedia: Ubuntu 20.04 LTS "Focal Fossa" - Release amd64 (20200423) SourcePackage: pulseaudio UpgradeStatus: No upgrade log present (probably fresh install) dmi.bios.date: 12/27/2017 dmi.bios.vendor: American Megatrends Inc. dmi.bios.version: 3703 dmi.board.asset.tag: Default string dmi.board.name: MAXIMUS VIII HERO dmi.board.vendor: ASUSTeK COMPUTER INC. dmi.board.version: Rev 1.xx dmi.chassis.asset.tag: Default string dmi.chassis.type: 3 dmi.chassis.vendor: Default string dmi.chassis.version: Default string dmi.modalias: dmi:bvnAmericanMegatrendsInc.:bvr3703:bd12/27/2017:svnSystemmanufacturer:pnSystemProductName:pvrSystemVersion:rvnASUSTeKCOMPUTERINC.:rnMAXIMUSVIIIHERO:rvrRev1.xx:cvnDefaultstring:ct3:cvrDefaultstring: dmi.product.family: To be filled by O.E.M. dmi.product.name: System Product Name dmi.product.sku: SKU dmi.product.version: System Version dmi.sys.vendor: System manufacturer To manage notifications about this bug go to: https://bugs.launchpad.net/pulseaudio/+bug/1877194/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1877194] Re: switch-on-connect mistakes startup for USB hotplug, so seemingly ignores the old default device on reboot
This bug has been reported on the Ubuntu ISO testing tracker. A list of all reports related to this bug can be found here: http://iso.qa.ubuntu.com/qatracker/reports/bugs/1877194 ** Tags added: iso-testing -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to pulseaudio in Ubuntu. https://bugs.launchpad.net/bugs/1877194 Title: switch-on-connect mistakes startup for USB hotplug, so seemingly ignores the old default device on reboot Status in PulseAudio: Unknown Status in pulseaudio package in Ubuntu: Triaged Bug description: Similar to: https://bugs.launchpad.net/ubuntu/+source/pulseaudio/+bug/1847570 Only difference is that it does not reset to HDMI output, but to one of my USB-outputs. It does not respect the change I made after reboot. In short: 1. Boot system 2. "Analogue Output - RODE NT-USB" is selected by default. I want to use "Line Out - Built-in Audio", which I choose. 3. Reboot. 4 Output device is now back to "Analogue Output - RODE NT-USB". ProblemType: Bug DistroRelease: Ubuntu 20.04 Package: pulseaudio 1:13.99.1-1ubuntu3 ProcVersionSignature: Ubuntu 5.4.0-29.33-generic 5.4.30 Uname: Linux 5.4.0-29-generic x86_64 NonfreeKernelModules: nvidia_modeset nvidia ApportVersion: 2.20.11-0ubuntu27 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC2: marcus 1604 F pulseaudio /dev/snd/controlC0: marcus 1604 F pulseaudio /dev/snd/controlC1: marcus 1604 F pulseaudio /dev/snd/pcmC1D0c: marcus 1604 F...m pulseaudio CasperMD5CheckResult: skip CurrentDesktop: ubuntu:GNOME Date: Wed May 6 23:40:08 2020 InstallationDate: Installed on 2020-05-06 (0 days ago) InstallationMedia: Ubuntu 20.04 LTS "Focal Fossa" - Release amd64 (20200423) SourcePackage: pulseaudio UpgradeStatus: No upgrade log present (probably fresh install) dmi.bios.date: 12/27/2017 dmi.bios.vendor: American Megatrends Inc. dmi.bios.version: 3703 dmi.board.asset.tag: Default string dmi.board.name: MAXIMUS VIII HERO dmi.board.vendor: ASUSTeK COMPUTER INC. dmi.board.version: Rev 1.xx dmi.chassis.asset.tag: Default string dmi.chassis.type: 3 dmi.chassis.vendor: Default string dmi.chassis.version: Default string dmi.modalias: dmi:bvnAmericanMegatrendsInc.:bvr3703:bd12/27/2017:svnSystemmanufacturer:pnSystemProductName:pvrSystemVersion:rvnASUSTeKCOMPUTERINC.:rnMAXIMUSVIIIHERO:rvrRev1.xx:cvnDefaultstring:ct3:cvrDefaultstring: dmi.product.family: To be filled by O.E.M. dmi.product.name: System Product Name dmi.product.sku: SKU dmi.product.version: System Version dmi.sys.vendor: System manufacturer To manage notifications about this bug go to: https://bugs.launchpad.net/pulseaudio/+bug/1877194/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1877194] Re: switch-on-connect mistakes startup for USB hotplug, so seemingly ignores the old default device on reboot
** Tags removed: groovy -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to pulseaudio in Ubuntu. https://bugs.launchpad.net/bugs/1877194 Title: switch-on-connect mistakes startup for USB hotplug, so seemingly ignores the old default device on reboot Status in PulseAudio: Unknown Status in pulseaudio package in Ubuntu: Triaged Bug description: Similar to: https://bugs.launchpad.net/ubuntu/+source/pulseaudio/+bug/1847570 Only difference is that it does not reset to HDMI output, but to one of my USB-outputs. It does not respect the change I made after reboot. In short: 1. Boot system 2. "Analogue Output - RODE NT-USB" is selected by default. I want to use "Line Out - Built-in Audio", which I choose. 3. Reboot. 4 Output device is now back to "Analogue Output - RODE NT-USB". ProblemType: Bug DistroRelease: Ubuntu 20.04 Package: pulseaudio 1:13.99.1-1ubuntu3 ProcVersionSignature: Ubuntu 5.4.0-29.33-generic 5.4.30 Uname: Linux 5.4.0-29-generic x86_64 NonfreeKernelModules: nvidia_modeset nvidia ApportVersion: 2.20.11-0ubuntu27 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC2: marcus 1604 F pulseaudio /dev/snd/controlC0: marcus 1604 F pulseaudio /dev/snd/controlC1: marcus 1604 F pulseaudio /dev/snd/pcmC1D0c: marcus 1604 F...m pulseaudio CasperMD5CheckResult: skip CurrentDesktop: ubuntu:GNOME Date: Wed May 6 23:40:08 2020 InstallationDate: Installed on 2020-05-06 (0 days ago) InstallationMedia: Ubuntu 20.04 LTS "Focal Fossa" - Release amd64 (20200423) SourcePackage: pulseaudio UpgradeStatus: No upgrade log present (probably fresh install) dmi.bios.date: 12/27/2017 dmi.bios.vendor: American Megatrends Inc. dmi.bios.version: 3703 dmi.board.asset.tag: Default string dmi.board.name: MAXIMUS VIII HERO dmi.board.vendor: ASUSTeK COMPUTER INC. dmi.board.version: Rev 1.xx dmi.chassis.asset.tag: Default string dmi.chassis.type: 3 dmi.chassis.vendor: Default string dmi.chassis.version: Default string dmi.modalias: dmi:bvnAmericanMegatrendsInc.:bvr3703:bd12/27/2017:svnSystemmanufacturer:pnSystemProductName:pvrSystemVersion:rvnASUSTeKCOMPUTERINC.:rnMAXIMUSVIIIHERO:rvrRev1.xx:cvnDefaultstring:ct3:cvrDefaultstring: dmi.product.family: To be filled by O.E.M. dmi.product.name: System Product Name dmi.product.sku: SKU dmi.product.version: System Version dmi.sys.vendor: System manufacturer To manage notifications about this bug go to: https://bugs.launchpad.net/pulseaudio/+bug/1877194/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1877194] Re: switch-on-connect mistakes startup for USB hotplug, so seemingly ignores the old default device on reboot
** Summary changed: - switch-on-connect mistakes startup for USB hotplug + switch-on-connect mistakes startup for USB hotplug, so seemingly ignores the old default device on reboot -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to pulseaudio in Ubuntu. https://bugs.launchpad.net/bugs/1877194 Title: switch-on-connect mistakes startup for USB hotplug, so seemingly ignores the old default device on reboot Status in PulseAudio: Unknown Status in pulseaudio package in Ubuntu: Triaged Bug description: Similar to: https://bugs.launchpad.net/ubuntu/+source/pulseaudio/+bug/1847570 Only difference is that it does not reset to HDMI output, but to one of my USB-outputs. It does not respect the change I made after reboot. In short: 1. Boot system 2. "Analogue Output - RODE NT-USB" is selected by default. I want to use "Line Out - Built-in Audio", which I choose. 3. Reboot. 4 Output device is now back to "Analogue Output - RODE NT-USB". ProblemType: Bug DistroRelease: Ubuntu 20.04 Package: pulseaudio 1:13.99.1-1ubuntu3 ProcVersionSignature: Ubuntu 5.4.0-29.33-generic 5.4.30 Uname: Linux 5.4.0-29-generic x86_64 NonfreeKernelModules: nvidia_modeset nvidia ApportVersion: 2.20.11-0ubuntu27 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC2: marcus 1604 F pulseaudio /dev/snd/controlC0: marcus 1604 F pulseaudio /dev/snd/controlC1: marcus 1604 F pulseaudio /dev/snd/pcmC1D0c: marcus 1604 F...m pulseaudio CasperMD5CheckResult: skip CurrentDesktop: ubuntu:GNOME Date: Wed May 6 23:40:08 2020 InstallationDate: Installed on 2020-05-06 (0 days ago) InstallationMedia: Ubuntu 20.04 LTS "Focal Fossa" - Release amd64 (20200423) SourcePackage: pulseaudio UpgradeStatus: No upgrade log present (probably fresh install) dmi.bios.date: 12/27/2017 dmi.bios.vendor: American Megatrends Inc. dmi.bios.version: 3703 dmi.board.asset.tag: Default string dmi.board.name: MAXIMUS VIII HERO dmi.board.vendor: ASUSTeK COMPUTER INC. dmi.board.version: Rev 1.xx dmi.chassis.asset.tag: Default string dmi.chassis.type: 3 dmi.chassis.vendor: Default string dmi.chassis.version: Default string dmi.modalias: dmi:bvnAmericanMegatrendsInc.:bvr3703:bd12/27/2017:svnSystemmanufacturer:pnSystemProductName:pvrSystemVersion:rvnASUSTeKCOMPUTERINC.:rnMAXIMUSVIIIHERO:rvrRev1.xx:cvnDefaultstring:ct3:cvrDefaultstring: dmi.product.family: To be filled by O.E.M. dmi.product.name: System Product Name dmi.product.sku: SKU dmi.product.version: System Version dmi.sys.vendor: System manufacturer To manage notifications about this bug go to: https://bugs.launchpad.net/pulseaudio/+bug/1877194/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
