Re: [Trisquel-users] hw/swcursor on eee pc x101ch

2013-08-26 Thread mikko . viinamaki
pre tags code tags The identifier can be anything unique. Yeah, no nvidia in sight, perhaps it was a leftover from where ever. One option would be to try a very recent kernel, like 3.10.*.

Re: [Trisquel-users] hw/swcursor on eee pc x101ch

2013-08-25 Thread mikko . viinamaki
Redshift works for me on radeon. What is the error message? The intel driver doesn't according to the man page have any option to draw cursor in either hw or sw.

Re: [Trisquel-users] hw/swcursor on eee pc x101ch

2013-08-25 Thread cmhobbs
That's the kicker, there's absolutely no error in vidmode. Here's my ~/.config/redshift.conf: ; Global settings [redshift] temp-day=6500 temp-night=3800 transition=1 gamma=1.0 ;location-provider=manual adjustment-method=vidmode ; The location provider and adjustment method settings ; are in

Re: [Trisquel-users] hw/swcursor on eee pc x101ch

2013-08-25 Thread cmhobbs
Note that I realize the initial output wasn't counting down. At night, it properly counts down to 3700K.

Re: [Trisquel-users] hw/swcursor on eee pc x101ch

2013-08-25 Thread mikko . viinamaki
Try putting this to /etc/X11/xorg.conf Section Device Identifier my intel cardie name Driver intel Option NoAccel true EndSection That should kill all hw acceleration. If it works with that, you can try enabling some accels to see if you find a

Re: [Trisquel-users] hw/swcursor on eee pc x101ch

2013-08-25 Thread cmhobbs
Disabling acceleration didn't appear to change anything, but in editing that, it occured to me that I may not be using the intel driver after all. Here's my /etc/X11/xorg.conf as it was immediately after install: Section Device Identifier Default Option GLXVBlank on

Re: [Trisquel-users] hw/swcursor on eee pc x101ch

2013-08-25 Thread mikko . viinamaki
That option is for the nouveau driver. Do you have a nvidia GPU? You can try and see what main menu system details say about your gfx. Or you can try to decipher xorg's log file.

Re: [Trisquel-users] hw/swcursor on eee pc x101ch

2013-08-25 Thread cmhobbs
It's not an nvidia as far as I know. H-Node says it's Intel: Intel Corporation Atom Processor D2xxx/N2xxx Integrated Graphics Controller (rev 09) (works, but without 3D acceleration) (http://h-node.org/notebooks/view/en/651/Eee-PC-X101CH) The system details show Graphics: Unknown. Is

Re: [Trisquel-users] hw/swcursor on eee pc x101ch

2013-08-25 Thread mikko . viinamaki
That xorg.conf snippet should do it. What does lspci -nn spit out?

Re: [Trisquel-users] hw/swcursor on eee pc x101ch

2013-08-25 Thread cmhobbs
The issue I had with the previous snippet is that I was unsure what the identifier string for my card would be. Using Driver intel appears to load the intel driver (as anticipated) by looking at xorg's logs. Here's the command output requested: 00:00.0 Host bridge [0600]: Intel Corporation