Re: [twsocket] Error in Sending mail
IMAGE wrote:Hello, Hello, > I enter my username and password, in SmtpCli (I don't need SSL). Perhaps they are overwritten by the demo application? Image or not image doesn't mater here but correct SMTP authentication, the easiest option is to use AuthType AutoSelect (cannot recall the exact names). If not authenticated the SMTP server does not allow relaying mail to another server. Also note that some servers require SSL (StartSsl command). -- Arno -- To unsubscribe or change your settings for TWSocket mailing list please goto http://lists.elists.org/cgi-bin/mailman/listinfo/twsocket Visit our website at http://www.overbyte.be
Re: [twsocket] Error in Sending mail
Hi PL if you use ICS to send an eMail f.e. from within a CGI, then you simply could use the SYNC SMTP client version SyncSmtpCli to send an eMail: emailstatus : integer; success : boolean; emailstatus := 1; Success := SyncSmtpCli1.ConnectSync; if not Success then goto wehaveaproblem; emailstatus := 2; Success := SyncSmtpCli1.EhloSync; if not Success then goto wehaveaproblem; emailstatus := 3; Success := SyncSmtpCli1.AuthSync; if not Success then goto wehaveaproblem; emailstatus := 4; Success := SyncSmtpCli1.MailSync; if not Success then goto wehaveaproblem; emailstatus := 5; Success := SyncSmtpCli1.QuitSync; if not Success then goto wehaveaproblem; Async smtp sample: see ICS sample OverbyteIcsMailSndAsync.dproj. Best regards Michael - Original Message - From: "IMAGE" To: Sent: Wednesday, April 16, 2014 8:40 AM Subject: [twsocket] Error in Sending mail Hello, After following an advise on a C++ forum (I use Builder C++), I download ICS. In first, I try to use the example IcsMailSnd.dproj I enter my username and password, in SmtpCli (I don't need SSL). When I launch the program, I enter the name of my Smtp server, the port (587), my mail address in From, and an address in To . I think it connected to the server, because I don't have any error message, the From is OK, but I have an error message for Receipt (I try few address of different domains, and it's the same message) : "This domain isn't in our allowed list". I contact our webmaster, we verify with WireShark, and our webmaster tell me that there isn't any authentification, but I have put the values SmtpAuthlogin, or SmtpAuthPlain on propriety AuthType of SmtpCli May you advise me to solve this problem ? Very cordially. PL -- To unsubscribe or change your settings for TWSocket mailing list please goto http://lists.elists.org/cgi-bin/mailman/listinfo/twsocket Visit our website at http://www.overbyte.be -- To unsubscribe or change your settings for TWSocket mailing list please goto http://lists.elists.org/cgi-bin/mailman/listinfo/twsocket Visit our website at http://www.overbyte.be
Re: [twsocket] Error in Sending mail
Hi PL I use Delphi - but I am pretty sure the C++ sample works (and the form looks) the same... When I run IcsMailSnd, I see a form with quite a lot of buttons in the upper right corner. After you had filled in the values for host, username a.s.o., did you click on these buttons or just wait ;-) ? 1. Fill in the values for host, username a.s.o. 2. Click Connect and WAIT for the smtp servers response (server response: see TMemo DisplayMemo - at the bottom of your form). 3. Then click Ehlo (Extended Helo), wait for the response, click Auth, wait again, press Mail, wait, then press the Quit button. http://en.wikipedia.org/wiki/Simple_Mail_Transfer_Protocol Best regards Michael - Original Message - From: "IMAGE" To: Sent: Wednesday, April 16, 2014 8:40 AM Subject: [twsocket] Error in Sending mail Hello, After following an advise on a C++ forum (I use Builder C++), I download ICS. In first, I try to use the example IcsMailSnd.dproj I enter my username and password, in SmtpCli (I don't need SSL). When I launch the program, I enter the name of my Smtp server, the port (587), my mail address in From, and an address in To . I think it connected to the server, because I don't have any error message, the From is OK, but I have an error message for Receipt (I try few address of different domains, and it's the same message) : "This domain isn't in our allowed list". I contact our webmaster, we verify with WireShark, and our webmaster tell me that there isn't any authentification, but I have put the values SmtpAuthlogin, or SmtpAuthPlain on propriety AuthType of SmtpCli May you advise me to solve this problem ? Very cordially. PL -- To unsubscribe or change your settings for TWSocket mailing list please goto http://lists.elists.org/cgi-bin/mailman/listinfo/twsocket Visit our website at http://www.overbyte.be -- To unsubscribe or change your settings for TWSocket mailing list please goto http://lists.elists.org/cgi-bin/mailman/listinfo/twsocket Visit our website at http://www.overbyte.be