except that there's now a common SPI framework for you to use
(drivers/spi/)
as well as an already existing atmel_spi.c driver
Yeah exactly . Its also there in u-boot-1.3.4. anyways im using the same
driver atmel_spi.c in /drivers/spi/ .
atleast can u tell me how to printf to print on
Hai,
I have populated ST 64MB chip and found that the nand flash commands work
for ST 64MB chip.But the same NAND flash drivers does not work for SAMSUNG
flash , Any Help?
Also one more issue is that the linux kernel boot is not seen after the
booting the kernel. , even though the kernel image
On Thu, Oct 22, 2009 at 12:03 PM, Magnus Lilja lilja.mag...@gmail.comwrote:
except that there's now a common SPI framework for you to use
(drivers/spi/)
as well as an already existing atmel_spi.c driver
Yeah exactly . Its also there in u-boot-1.3.4. anyways im using the same
driver
printf(%s:%d\n, __FILE__, __LINE__);? Given that printf and the UART
works on your board that is.
I tried with this
printf(%s:%d\n, /drivers/spi/spi-new.c, 72);
72 is the my line number but im gettin error . so what exactly should i
specify in __FILE_ and __LINE__ places .plz let me
On Thu, Oct 22, 2009 at 12:59 PM, Magnus Lilja lilja.mag...@gmail.comwrote:
printf(%s:%d\n, __FILE__, __LINE__);? Given that printf and the
UART
works on your board that is.
I tried with this
printf(%s:%d\n, /drivers/spi/spi-new.c, 72);
72 is the my line number but im gettin error
Hi List
I can use fatload or ext2load to read from USB storage
My need is to write to a storage over USB interface.
With reference to this link
https://lists.one-eyed-alien.net/pipermail/usb-storage/2008-May/003665.html
Is there any interface available or under development in U-boot to write
Ben Warren biggerbadder...@gmail.com wrote on 22/09/2009 18:55:22:
Anton Vorontsov wrote:
On Tue, Sep 22, 2009 at 04:03:16PM +0200, Joakim Tjernlund wrote:
[...]
Also
drivers/qe/uec.h:int uec_initialize(bd_t *bis, uec_info_t *uec_info);
include/netdev.h:int uec_initialize(int
I'm running a home-brew based on 2008-10
I started with NGW100 version, and went on from there :-(
D
In article 20091021184858.4410819...@gemini.denx.de, w...@denx.de
(Wolfgang Denk) wrote:
*From:* Wolfgang Denk w...@denx.de
*To:* from_denx_ub...@dexdyne.com
*CC:* u-boot@lists.denx.de
thanks to everyone I have a working bootcmd which stops if the mmc card
is extracted.
what I'd like to do is put it in a while loop - this is an embedded
system and it has nothing better to do than to try again.
but if I set up
bootcmd=while [ ]; do ; mmcinit ext2load mmc 0:1 0x1040
Hi Prafulla,
2009/10/22 Prafulla Wadaskar prafu...@marvell.com:
Hi List
I can use fatload or ext2load to read from USB storage
My need is to write to a storage over USB interface.
With reference to this link
https://lists.one-eyed-alien.net/pipermail/usb-storage/2008-May/003665.html
Is
From: Wolfgang Grandegger w...@denx.de
This patch add support for the IPEK01 MPC5200 based board.
It requires three patches for the Fujitsu MB862xx driver.
Anatolij Gustschin (1):
video: mb862xx: add option CONFIG_VIDEO_MB862xx_ACCEL for 32bpp mode
Wolfgang Grandegger (3):
video: mb862xx:
From: Wolfgang Grandegger w...@denx.de
In 16 bpp mode, the new IPEK01 board only requires swapping of D16 words
for D32 accesses due to the diffferent connecting to the GDC bus. This
patch introduces the configuration option VIDEO_FB_16BPP_WORD_SWAP,
which should be set for all board using the
From: Anatolij Gustschin ag...@denx.de
The new IPEK01 board can use the 32 bpp mode for the Lime graphics
controller. For this mode, video accelaration does not work. This patch
makes the accelaration configurable via CONFIG_VIDEO_MB862xx_ACCEL,
which is enabled for the lwmon5 and the socrates
From: Wolfgang Grandegger w...@denx.de
To avoid board-specific code accessing the mb862xx registers directly,
the public function mb862xx_probe() has been introduced. Furthermore,
the Change of Clock Frequency and Set Memory I/F Mode registers
are now defined by CONFIG_SYS_MB862xx_CCF and
From: Wolfgang Grandegger w...@denx.de
This patch adds support for the board IPEK01 based on the MPC5200.
The Futjitsu Lime graphics controller is configured in 16 bpp mode.
Signed-off-by: Wolfgang Grandegger w...@denx.de
---
MAINTAINERS |2 +
MAKEALL |1 +
From: Wolfgang Grandegger w...@denx.de
*** BLURB HERE ***
Anatolij Gustschin (1):
video: mb862xx: add option CONFIG_VIDEO_MB862xx_ACCEL for 32bpp mode
Wolfgang Grandegger (3):
video: mb862xx: improve board-specific Lime configuration
video: mb862xx: add option VIDEO_FB_16BPP_WORD_SWAP for
___
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
Hi,
I don't see MUSB support in uboot for OMAP3 platforms though a few patches
supporting MUSB are available in Sakoman's tree (omap-dev-usb branch) since
Feb-09.
What is the current status on this? I saw some long discussion on MUSB
Patches specially for clock changes.
Is someone working
Dear Prafulla Wadaskar,
In message 73173d32e9439e4abb5151606c3e19e202f1d36...@sc-vexch1.marvell.com
you wrote:
I can use fatload or ext2load to read from USB storage
My need is to write to a storage over USB interface.
With reference to this link
Dear David Collier,
In message memo.20091022093854.20...@postmaster+dexdyne.com.cix.co.uk you
wrote:
what I'd like to do is put it in a while loop - this is an embedded
system and it has nothing better to do than to try again.
but if I set up
bootcmd=while [ ]; do ; mmcinit
Dear Wolfgang Grandegegr,
In message 1256208516-10637-2-git-send-email...@grandegger.com you wrote:
From: Wolfgang Grandegger w...@denx.de
*** BLURB HERE ***
Heh :-)
Best regards,
Wolfgang Denk
--
DENX Software Engineering GmbH, MD: Wolfgang Denk Detlev Zundel
HRB 165235 Munich,
-Original Message-
From: l.ping...@gmail.com [mailto:l.ping...@gmail.com] On
Behalf Of Remy Bohmer
Sent: Thursday, October 22, 2009 4:18 PM
To: Prafulla Wadaskar
Cc: u-boot@lists.denx.de
Subject: Re: [U-Boot] Write operation for USB storage
Hi Prafulla,
2009/10/22 Prafulla
Hi,
I was looking the ctrl_regs.c file at the last release of u-boot,
specifically at sdram_mode register, and checking at AN3369.pdf I think that
Rtt bit position might be wrong. At the code, the bit shifting is 5, but
shouldn't be 6? I think that it overwrites AL register.
Thanks in advance,
Kumar Gala wrote:
Its possible that we end up with a device tree that happens to be a
particular size that after we call fdt_resize() we don't have any
space left for the initrd mem_rsv.
Fix this be adding a second mem_rsv into the size calculation. We
had one to cover the fdt itself and
sunr2007 wrote:
Dear all ,
Is there a option to print the message or some variable value which i av
modified in code to print it on serial console to check whether it is
getting executed or not? like we use printf in application programming . if
yes how to enable it and use it? . thanks.
Dear Ravi Kumar Kulkarni,
In message 532dd5840910220518h4df2fe9cy7e66f043a2acd...@mail.gmail.com you
wrote:
2) changed config file in /include/configs/at91sam9261ek.h
added a line
# CONFIG_ATMEL_SPI 1
As Mike already pointed out you should probably consider hiring
someone who has a clue
On Thu, Oct 22, 2009 at 6:04 PM, Wolfgang Denk w...@denx.de wrote:
Dear Ravi Kumar Kulkarni,
In message 532dd5840910220518h4df2fe9cy7e66f043a2acd...@mail.gmail.com
you wrote:
# CONFIG_ATMEL_SPI 1
correction : its actually
#define CONFIG_ATMEL_SPI 1
As Mike already pointed out you
Wolfgang Denk wrote:
Dear Wolfgang Grandegegr,
In message 1256208516-10637-2-git-send-email...@grandegger.com you wrote:
From: Wolfgang Grandegger w...@denx.de
*** BLURB HERE ***
Heh :-)
git send-email obviously has sent the emacs backup file
-cover-letter.patch~ in my patch
Hi Ravi,
Ravi Kumar Kulkarni wrote:
Yes, printf(), as you can see by looking at the source. The serial
port and printf() support is one of the first things that is
configured exactly to help debug via print statements.
If it isn't working on your board, you have more fundamental
I have submitted patches for musb recently.
I am using them to move the usb/cdc gadget support forward to the
mainline. Please review them before submitting yours.
Tom
Gupta, Ajay Kumar wrote:
Hi,
I don't see MUSB support in uboot for OMAP3 platforms though a few patches
supporting MUSB
Hi,
there was a simple script fine in the patch directory as well, causing
git send-email to compose and send a crap mail using wired addresses.
Sorry again for the noise. Will remember next time.
Wolfgang.
___
U-Boot mailing list
U-Boot@lists.denx.de
Hi Mike
I've included your source mmc-spi.c into my u-boot tree.
What do I have to do to activate your driver ?
Is it enough to call the function mmc_legacy_init(int verbose) ?
and set the new config_ ?
regards
Wilfried
Mike Frysinger vap...@gentoo.org schrieb im Newsbeitrag
OK I have changed it to
while 1==1 ; do ; mmcinit ext2load mmc 0:1 0x1040 /boot/uImage
bootm 0x1040 ; done
and if I do run bootcmd it simply says unknown command 1==1
so I'm still lost
I know I have hush installed, cosz if I do your multi-line-version I get
the prompt.
sorry - my fault - I failed to grasp the meaning of itest
This now works
while itest 1 == 1 ; do ; mmcinit ext2load mmc 0:1 0x1040
/boot/uImage bootm 0x1040 ; done
I could do with a literal true - I tried 'true' but that wasn't right -
is there a suitable constant value?
I'd still
Dear David Collier,
In message memo.20091022142208.20...@postmaster+dexdyne.com.cix.co.uk you
wrote:
OK I have changed it to
while 1==1 ; do ; mmcinit ext2load mmc 0:1 0x1040 /boot/uImage
bootm 0x1040 ; done
and if I do run bootcmd it simply says unknown command 1==1
so
-Original Message-
From: u-boot-boun...@lists.denx.de [mailto:u-boot-
boun...@lists.denx.de] On Behalf Of David Collier
Sent: den 22 oktober 2009 15:22
To: u-boot@lists.denx.de
Subject: Re: [U-Boot] hush while confusion
OK I have changed it to
while 1==1 ; do ; mmcinit
On Thursday 22 October 2009 09:02:32 Wilfried Busalski wrote:
Hi Mike
please dont top post
I've included your source mmc-spi.c into my u-boot tree.
What do I have to do to activate your driver ?
Is it enough to call the function mmc_legacy_init(int verbose) ?
and set the new config_ ?
On Oct 15, 2009, at 8:47 AM, Anton Vorontsov wrote:
Currently fdt_fixup_stdout() is using hard-coded CONFIG_CONS_INDEX
constant. With multi-serial support, the CONS_INDEX may no longer
represent actual console, so we should try to extract port number
from the current stdio device name
On Oct 22, 2009, at 6:48 AM, Werner Nedel wrote:
Hi,
I was looking the ctrl_regs.c file at the last release of u-boot,
specifically at sdram_mode register, and checking at AN3369.pdf I
think that
Rtt bit position might be wrong. At the code, the bit shifting is 5,
but
shouldn't be 6?
Hi Mike
thaks for your responds
I'm very new to u-boot and my problem is on with hook the mmc interface will
be activated and therefor I did not understand what to do ?
regards
wilfried
On Thursday 22 October 2009 09:02:32 Wilfried Busalski wrote:
Hi Mike
please dont top post
I've
Hi,
sorry about that. I'm working on a MPC8548 platform and using the mpc8xxx
common code for DDR configuration.
On Thu, Oct 22, 2009 at 11:36 AM, Kumar Gala ga...@kernel.crashing.orgwrote:
On Oct 22, 2009, at 6:48 AM, Werner Nedel wrote:
Hi,
I was looking the ctrl_regs.c file at the
Kumar Gala wrote:
On Oct 15, 2009, at 8:47 AM, Anton Vorontsov wrote:
Currently fdt_fixup_stdout() is using hard-coded CONFIG_CONS_INDEX
constant. With multi-serial support, the CONS_INDEX may no longer
represent actual console, so we should try to extract port number
from the current stdio
Sorry again,
and with DDR2.
On Thu, Oct 22, 2009 at 11:42 AM, Werner Nedel wmne...@gmail.com wrote:
Hi,
sorry about that. I'm working on a MPC8548 platform and using the mpc8xxx
common code for DDR configuration.
On Thu, Oct 22, 2009 at 11:36 AM, Kumar Gala
Proper behavior is to pull MAC address from NVRAM in the initialization()
an
stuff it in dev-address, then program the device from dev-address in
the init() function.
Signed-off-by: Ben Warren biggerbadder...@gmail.com
---
Ben I tested and here is the result.
1) dhcp still does not
Tom,
The ARM mach-types.h in /include/asm-arm needs to be updated with what is
present at
http://www.arm.linux.org.uk/developer/machines/
Thanks,
Sandeep
___
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
Dear David Collier,
In message memo.20091022142824.20...@postmaster+dexdyne.com.cix.co.uk you
wrote:
This now works
while itest 1 == 1 ; do ; mmcinit ext2load mmc 0:1 0x1040
/boot/uImage bootm 0x1040 ; done
I could do with a literal true - I tried 'true' but that wasn't right
Dear =?iso-8859-1?Q?=D6rjan_Friberg?=,
In message a646fe253fdf3d4f9742732015311cd44f7...@fg-server.flatfrog.local
you wrote:
OK I have changed it to
while 1==1 ; do ; mmcinit ext2load mmc 0:1 0x1040 /boot/uImage
bootm 0x1040 ; done
Replace the 1==1 with : and skip the ;
-Original Message-
From: Wolfgang Denk [mailto:w...@denx.de]
Sent: den 22 oktober 2009 20:07
To: Örjan Friberg
Cc: from_denx_ub...@dexdyne.com; u-boot@lists.denx.de
Subject: Re: [U-Boot] hush while confusion
Dear =?iso-8859-1?Q?=D6rjan_Friberg?=,
In message
Paulraj, Sandeep wrote:
Tom,
The ARM mach-types.h in /include/asm-arm needs to be updated with what is
present at
http://www.arm.linux.org.uk/developer/machines/
Thanks,
Sandeep
___
U-Boot mailing list
U-Boot@lists.denx.de
On Thursday 22 October 2009 10:31:23 Wilfried Busalski wrote:
Hi Mike
you're still top posting
I'm very new to u-boot and my problem is on with hook the mmc interface
will be activated and therefor I did not understand what to do ?
i dont know what you mean. there is no hook for you to
This is not the sequoia board.
Signed-off-by: Matthias Fuchs matthias.fu...@esd.eu
---
board/esd/pmc440/config.mk |4
1 files changed, 0 insertions(+), 4 deletions(-)
diff --git a/board/esd/pmc440/config.mk b/board/esd/pmc440/config.mk
index 0c4d582..91e65ec 100644
---
The autoupdate feature is not used on PLU405 boards.
So remove it.
Signed-off-by: Matthias Fuchs matthias.fu...@esd.eu
---
board/esd/plu405/Makefile |1 -
board/esd/plu405/plu405.c | 16
include/configs/PLU405.h |2 --
3 files changed, 0 insertions(+), 19 deletions(-)
This patch fixes an ugly behavior of the IL712 magnetic couplers
as used on PLU405. These parts will remember their last state
over a power cycle which might cause unwanted behavior.
Signed-off-by: Matthias Fuchs matthias.fu...@esd.eu
---
board/esd/plu405/plu405.c | 33
Dear Matthias Fuchs,
In message 200910222308.14956.matthias.fu...@esd-electronics.com you wrote:
+ u8 *ctrl = (u8*)addr;
+
+ /* reset */
+ out_8(ctrl, 0x21);
+
+ /* dominant */
+ out_8(ctrl + 6, 0x00);
+ out_8(ctrl + 7, 0x14);
+ out_8(ctrl + 8, 0xfe);
+
Paulraj, Sandeep wrote:
Tom,
The ARM mach-types.h in /include/asm-arm needs to be updated with what
is present at
http://www.arm.linux.org.uk/developer/machines/
Thanks,
Sandeep
___
U-Boot mailing list
U-Boot@lists.denx.de
Hi Stefan, Wolfgang,
Stefan Roese wrote:
This function can be used to update the size in the reg property
of the NOR FLASH device nodes. This is necessary for boards with
non-fixed NOR FLASH sizes.
Signed-off-by: Stefan Roese s...@denx.de
Cc: Wolfgang Denk w...@denx.de
Cc: Gerald Van
On Thu, Oct 22, 2009 at 4:42 PM, Paulraj, Sandeep s-paul...@ti.com wrote:
Paulraj, Sandeep wrote:
Tom,
The ARM mach-types.h in /include/asm-arm needs to be updated with what
is present at
http://www.arm.linux.org.uk/developer/machines/
Thanks,
Sandeep
Awesome, great code!. I think it MUST be added to the u-boot tree but
i'm not the all powerful Wolfgang ;-).
I think he doesn't know how to include this driver and the spi one.
You should take a look at the configuration file for your board and
add the corresponding macros. CONFIG_SPI_MMC is a new
Paulraj, Sandeep wrote:
Paulraj, Sandeep wrote:
Tom,
The ARM mach-types.h in /include/asm-arm needs to be updated with what
is present at
http://www.arm.linux.org.uk/developer/machines/
Thanks,
Sandeep
___
U-Boot mailing list
Enable ECC error checking on XES's 85xx and 86xx boards.
Signed-off-by: Peter Tyser pty...@xes-inc.com
---
include/configs/XPEDITE5170.h |1 +
include/configs/XPEDITE5200.h |1 +
include/configs/XPEDITE5370.h |1 +
3 files changed, 3 insertions(+), 0 deletions(-)
diff --git
Enable the 'ecc' command for XES's 85xx and 86xx boards.
Signed-off-by: Peter Tyser pty...@xes-inc.com
---
include/configs/XPEDITE5170.h |1 +
include/configs/XPEDITE5200.h |1 +
include/configs/XPEDITE5370.h |1 +
3 files changed, 3 insertions(+), 0 deletions(-)
diff --git
Note that SPRG4 is used to store U-Boot's post 'word'.
Signed-off-by: Peter Tyser pty...@xes-inc.com
---
board/xes/common/Makefile|1 +
board/xes/common/fsl_8xxx_post.c | 36
include/configs/XPEDITE5170.h|1 +
Add a new 'ecc' command to interact with the 85xx and 86xx DDR ECC
registers. The 'ecc' command can inject data/ECC errors to simulate
errors and provides an 'info' subcommand which displays ECC error
information such as failure address, read vs expected data/ECC,
physical signal which failed,
Add a CONFIG_CHECK_ECC_ERRORS define which causes the SDRAM POST and
mtest command to check for ECC errors during execution.
The 85xx and 86xx architectures currently support enabling
CONFIG_CHECK_ECC_ERRORS. Other architectures/boards can use it if they
implement an ecc_count() and ecc_info()
Your message to mx.jaring.my was rejected.
I said:
RCPT To:tha...@pop.jaring.my
And mx.jaring.my [192.228.250.150] responded with
553 5.3.0 tha...@pop.jaring.my... User unknown
The message headers follow:
---BeginMessage---
-
---End Message---
Previously, passing readline() or readline_into_buffer() a NULL 'prompt'
parameter would result in puts() printing garbage when
CONFIG_CMDLINE_EDITING was enabled.
Signed-off-by: Peter Tyser pty...@xes-inc.com
---
common/main.c |3 ++-
1 files changed, 2 insertions(+), 1 deletions(-)
diff
Signed-off-by: Peter Tyser pty...@xes-inc.com
---
common/main.c |5 +
1 files changed, 1 insertions(+), 4 deletions(-)
diff --git a/common/main.c b/common/main.c
index 298982a..b47e443 100644
--- a/common/main.c
+++ b/common/main.c
@@ -715,16 +715,13 @@ static int cread_line(const char
If the 'buf' parameter is a non-0-length string, its contents will be
edited. Previously, the initial value of 'buf' was ignored and the
user entered its contents from scratch.
Signed-off-by: Peter Tyser pty...@xes-inc.com
---
common/main.c | 10 ++
1 files changed, 10 insertions(+),
Previously _do_setenv() would only delete an environment variable if it
was passed a NULL string pointer as a value. It should also delete an
environment variable when it encounters a valid string pointer of
0-length.
Signed-off-by: Peter Tyser pty...@xes-inc.com
---
common/cmd_nvedit.c |2
The editenv command can be used to edit an environment variable.
Editing an environment variable is useful when one wants to tweak an
existing variable, for example fix a typo or change the baudrate in the
'bootargs' environment variable.
Signed-off-by: Peter Tyser pty...@xes-inc.com
---
The
On Thursday 22 October 2009 18:50:16 Ivan Llopard wrote:
Awesome, great code!. I think it MUST be added to the u-boot tree but
i'm not the all powerful Wolfgang ;-).
I think he doesn't know how to include this driver and the spi one.
You should take a look at the configuration file for your
Dear Wolfgang,
Can you let us know by when this release will be made?
Regards
Maneesh
-Original Message-
From: u-boot-boun...@lists.denx.de
[mailto:u-boot-boun...@lists.denx.de] On Behalf Of Wolfgang Denk
Sent: Saturday, October 17, 2009 2:24 AM
To: u-boot@lists.denx.de
Subject:
Gupta Maneesh-B18878 wrote:
Dear Wolfgang,
Can you let us know by when this release will be made?
Regards
Maneesh
http://www.denx.de/wiki/U-Boot/ReleaseCycle
Current Status:
* The Merge Window for the next release (v2009.11) is closed.
* Release v2009.11 is scheduled in 26 days
Is there any rc release planned as mentioned by wolfgang in his last
week's email?
Regards
Maneesh
-Original Message-
From: Jerry Van Baren [mailto:gvb.ub...@gmail.com]
Sent: Friday, October 23, 2009 7:58 AM
To: Gupta Maneesh-B18878
Cc: Wolfgang Denk; u-boot@lists.denx.de
74 matches
Mail list logo
