Hi Simon,
On Wednesday 01 June 2011 07:43 AM, Simon Glass wrote:
On Tue, May 31, 2011 at 12:54 AM, V, Aneeshane...@ti.com wrote:
Hi Wolfgang,
On Tue, May 17, 2011 at 2:57 PM, Wolfgang Denkw...@denx.de wrote:
Dear Aneesh V,
In message4dd23561.70...@ti.com you wrote:
In fact I had
Signed-off-by: Heiko Schocher h...@denx.de
---
post/drivers/memory.c |5 +++--
1 files changed, 3 insertions(+), 2 deletions(-)
diff --git a/post/drivers/memory.c b/post/drivers/memory.c
index 3f47449..b7943ef 100644
--- a/post/drivers/memory.c
+++ b/post/drivers/memory.c
@@ -500,9 +500,10
Signed-off-by: Heiko Schocher h...@denx.de
---
post/drivers/memory.c | 20
1 files changed, 20 insertions(+), 0 deletions(-)
diff --git a/post/drivers/memory.c b/post/drivers/memory.c
index b7943ef..47b312d 100644
--- a/post/drivers/memory.c
+++ b/post/drivers/memory.c
@@
The rsk7264 (also know as rsk2+sh7264) is an SH2A based board
with 64MB NAND flash and 64MB SDRAM. It is very similar to the
rsk7203 board.
Signed-off-by: Phil Edworthy phil.edwor...@renesas.com
Cc: Nobuhiro Iwamatsu iwama...@nigauri.org
---
Changes for v2:
- Fixed condition check for scif3
Dear Heiko Schocher,
In message 1306909447-19603-2-git-send-email...@denx.de you wrote:
Signed-off-by: Heiko Schocher h...@denx.de
---
post/drivers/memory.c | 20
1 files changed, 20 insertions(+), 0 deletions(-)
diff --git a/post/drivers/memory.c
Hello Wolfgang,
Wolfgang Denk wrote:
Dear Heiko Schocher,
In message 1306909447-19603-2-git-send-email...@denx.de you wrote:
Signed-off-by: Heiko Schocher h...@denx.de
---
post/drivers/memory.c | 20
1 files changed, 20 insertions(+), 0 deletions(-)
diff --git
At least on ARM the ipaddr is only set in board_init_r function. The
problem is if ipaddr is not defined in environment importing another
environment defined don't update the ipaddr value.
For example, suppose we've a default environment without net variables
defined and we want to import an
SH2A toolchains often only provide an fdpic version of libgcc. This
can't be used with bare-metal software like U-Boot, so this patch
provides the necessary functions extracted from libgcc.
Signed-off-by: Phil Edworthy phil.edwor...@renesas.com
Cc: Nobuhiro Iwamatsu iwama...@nigauri.org
---
--
Vishweshwar Hiremath.
Sr. Software Engineer.
NVIDIA Graphics Pvt. Ltd
Pune. (India).
___
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
Hi,
This is something you are supposed to do yourself. Please see [1]
for more details.
Best regards,
Anatolij
[1] http://lists.denx.de/mailman/listinfo/u-boot
___
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
On Wed, 2011-06-01 at 00:57 -0700, Lars Michael wrote:
Hello,
Using mkfs.ubifs and ubinize I have created an image with 5 volumes.
In Linux I could flash it using ubiformat /dev/mtd1 -f /root/ubi.img
and attach it using ubiattach /dev/ubi_ctrl -m 1. It worked.
OK.
In production I would
OMAP3 relied on the memory config done by X-loader or Configuration Header.
This has to be reworked for the implementation of a SPL. This patch
configures
RAM bank 0 if CONFIG_PRELOADER is set. Settings for Micron-RAM used by
devkit8000 are added to mem.h
Signed-off-by: Simon Schwarz
A quota check is running on your mailbox account.Your account limit is 378.54
MB of mailbox space used. At 380.86 MB you will not be able send mail or
receive mail.
This is done so that you have time to clean out some mail (likely from your
Junk and/or Trash folders) and reclaim some free
Hello,
I'm playing with mmc/sd card on a custom board with at91sam9g20 processor.
U-boot v2011.3 now runs well as I added support for AT45DB041 dataflash,
which is used on my board. It's size is only 512kB so I need sd card for
Linux image and rootfs. Unfortunately I still can't get mmc/sd
Thanks to:
commit c3330e9d6a11b6ead4a2346001338ce884b5832b
Author: Heiko Schocher h...@denx.de
Date: Fri Sep 17 13:10:30 2010 +0200
ARM (ARM926ejs): add data cache support, tested on magnesium and tx25 board
My 'Basi' board, based on DaVinci dm365, can read the uImage (1.5MB)
in 0.7 sec
Hi Lars
On Wed, Jun 1, 2011 at 3:57 AM, Lars Michael lh_p...@yahoo.com wrote:
Hello,
Using mkfs.ubifs and ubinize I have created an image with 5 volumes. In Linux
I could flash it using ubiformat /dev/mtd1 -f /root/ubi.img and attach it
using ubiattach /dev/ubi_ctrl -m 1. It worked.
In
Hi,
I try put a brakpoint in function cpu_init_f, but is not working
my config in BDI is:
8315-uhetreset
- TARGET: processing user reset request
- BDI asserts HRESET
- Reset JTAG controller passed
- Bypass check: 0x0001 = 0x0001
- JTAG exists check passed
- IDCODE is 0x268B401D
- BDI
On Wednesday, June 01, 2011 02:54:30 Heiko Schocher wrote:
Wolfgang Denk wrote:
Heiko Schocher wrote:
--- a/post/drivers/memory.c
+++ b/post/drivers/memory.c
@@ -455,10 +455,30 @@ static int memory_post_tests (unsigned long start,
unsigned long size)
__attribute__((weak))
int
Hi Stefan,
On Tue, May 31, 2011 at 4:37 PM, Stefan Roese s...@denx.de wrote:
Hi Frank,
On Tuesday 31 May 2011 15:55:56 Frank Svendsbøe wrote:
Understood. But why don't you disable write-protection when you first
call flash_init()? And enable the write-protection after the chip is
Fixed a l10n-ism in svn revision retrieval.
Signed-off-by: Stephane Fillod fill...@users.sf.net
---
--- a/tools/setlocalversion
+++ b/tools/setlocalversion
@@ -31,7 +31,7 @@
fi
# Check for svn and a svn repo.
-if rev=`svn info 2/dev/null` ; then
+if rev=`LANG=C svn info 2/dev/null` ; then
On Tuesday, May 24, 2011 11:47:39 Matthew McClintock wrote:
Right now we do not check if do_bootm is actually built into this
u-boot. Instead check define and only call do_bootm if it's actually
available.
actually, if you dont mind, i'd like to obsolete this patch with the one
below. what do
On Wednesday, June 01, 2011 11:02:30 Stephane Fillod wrote:
-if rev=`svn info 2/dev/null` ; then
+if rev=`LANG=C svn info 2/dev/null` ; then
rev=`echo ${rev} | grep '^Revision' | awk '{print $NF}'`
LANG=C wont fix the bug, just make it work in more cases. you need LC_ALL=C.
-mike
Acked-by: Mike Frysinger vap...@gentoo.org
-mike
signature.asc
Description: This is a digitally signed message part.
___
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
Hi Frank,
On Wednesday 01 June 2011 16:33:14 Frank Svendsbøe wrote:
Simply because disabling write-protection is not impossible after
installation. Our device will be located 3000m below sea level.
I see.
Hmm.. then you read my mind :) I meant to say is not possible and not is
not
Hi,
we try to enable the ethernet-interface on the BeagleBoard xM (Rev B)
and therefore we need to get the USB-HOST (EHCI) working. It seems that
the internal communication to the host is working, but the interface to
the external PHY isn't.
We are pretty sure that the USBTLL should be
On Wed, Jun 1, 2011 at 10:10 AM, Mike Frysinger vap...@gentoo.org wrote:
actually, if you dont mind, i'd like to obsolete this patch with the one
below. what do you think ?
-mike
diff --git a/common/cmd_bootm.c b/common/cmd_bootm.c
index 18019d6..c5c169f 100644
--- a/common/cmd_bootm.c
On Wednesday, June 01, 2011 11:55:03 McClintock Matthew-B29882 wrote:
On Wed, Jun 1, 2011 at 10:10 AM, Mike Frysinger vap...@gentoo.org wrote:
actually, if you dont mind, i'd like to obsolete this patch with the one
below. what do you think ?
diff --git a/common/cmd_bootm.c
Hello,
Our company represents an online community of over 36 million people,
most of which are located in the US and Canada. This advertising allows
us to present our online community with a first choice when they search for
anything on any of the major search engines.
We seek a preferred source
Hi John,
Le 01/06/2011 00:29, John Rigby a écrit :
On Tue, May 31, 2011 at 2:31 PM, Albert ARIBAUD
albert.u.b...@aribaud.net wrote:
Hi Wolfgang,
The following changes since commit 5d1ee00b1fe1180503f6dfc10e87a6c6e74778f3:
.gitignore: update list of u-boot.* files and add *.bin
Le 01/06/2011 00:05, Albert ARIBAUD a écrit :
Signed-off-by: Albert ARIBAUDalbert.u.b...@aribaud.net
---
Resent on behalf of the Marvell custodian
V2: reworked to apply on top of current u-boot-arm/master
V1: initial submission
include/configs/aspenite.h |1 -
On Wed, Jun 1, 2011 at 5:34 PM, Stefan Roese s...@denx.de wrote:
Hi Frank,
On Wednesday 01 June 2011 16:33:14 Frank Svendsbøe wrote:
Simply because disabling write-protection is not impossible after
installation. Our device will be located 3000m below sea level.
I see.
Hmm.. then you
Hi John,
Le 19/04/2011 22:42, John Rigby a écrit :
Based on ST-Ericsson internal git repo.
Signed-off-by: Mathieu Poiriermathieu.poir...@linaro.org
Signed-off-by: John Rigbyjohn.ri...@linaro.org
CC: Albert Aribaudalbert.arib...@free.fr
---
v2: cleanup, mostly removal of unused defines
v3:
Hi John,
Le 19/04/2011 22:42, John Rigby a écrit :
From: Michael Brandtmichael.bra...@stericsson.com
Signed-off-by: John Rigbyjohn.ri...@linaro.org
CC: Heiko Schocherh...@denx.de
---
v2: Incorporate suggestions from Heiko Schocher
v3: Fix line length problem reported by Heiko Schocher
v4:
Hi John,
Le 19/04/2011 22:42, John Rigby a écrit :
Minimal platform support to boot linux from SD.
Supported devices/hw limited to external MMC/SD slot,
GPIO, I2C and minimal PRCMU.
Signed-off-by: John Rigbyjohn.ri...@linaro.org
CC: Albert Aribaudalbert.arib...@free.fr
---
This board
Hi Chander,
Le 26/05/2011 13:10, Chander Kashyap a écrit :
Modifies CPU Frequency to 1GHz and removes hard coding of mmc_pre_ratio for
MMC Channel2 in FSYS2 register.
Signed-off-by: Chander Kashyapchander.kash...@linaro.org
---
board/samsung/smdkv310/lowlevel_init.S |4 ++--
1 files
Hi Thomas,
Le 31/05/2011 15:52, Thomas Abraham a écrit :
Fix the incorrect macro check for MIU linear mapping conditional compilation.
Signed-off-by: Thomas Abrahamthomas.abra...@linaro.org
---
board/samsung/smdkv310/mem_setup.S |4 ++--
1 files changed, 2 insertions(+), 2
Hello Christian,
On Wed, Jun 1, 2011 at 12:58 PM, Christian Riesch
christian.rie...@omicron.at wrote:
I have tried to run recent versions of u-boot on the da850evm (AM1808
eXperimenter's Kit) board. Using Texas Instrument's User Boot Loader (UBL)
to start u-boot (the default configuration for
On Wed, 1 Jun 2011 11:10:49 -0400
Mike Frysinger vap...@gentoo.org wrote:
On Tuesday, May 24, 2011 11:47:39 Matthew McClintock wrote:
Right now we do not check if do_bootm is actually built into this
u-boot. Instead check define and only call do_bootm if it's actually
available.
On Wed, Jun 1, 2011 at 11:59 AM, Mike Frysinger vap...@gentoo.org wrote:
I don't tink this will work since if we undef CONFIG_CMD_BOOTM we
don't even compile common/cmd_bootm.c.
please double check the patch where it modifies the header
Sorry. I did not get that far. Yes this looks good.
ACK
This fixes the MX31ADS build by using the new relocation scheme.
Signed-off-by: Fabio Estevam fabio.este...@freescale.com
---
Build tested only.
Do not have the hardware handy to test.
board/freescale/mx31ads/mx31ads.c | 19 ---
board/freescale/mx31ads/u-boot.lds | 42
This describes what it is for, devices supported, how to enable for your
board in U-Boot, setting up the server, and notes about MAC addresses.
Changes for v6:
- Adjust documentation file according to Wolfgang's comments
Signed-off-by: Simon Glass s...@chromium.org
---
doc/README.usb | 157
Built-in Ethernet adapters support setting the mac address by means of a
ethaddr environment variable for each interface (ethaddr, eth1addr, eth2addr).
This adds similar support to the USB network side, using the names
usbethaddr, usbeth1addr, etc. They are kept separate since we don't want
a USB
This is a small clean-up patch.
Signed-off-by: Simon Glass s...@chromium.org
---
net/bootp.c | 75 +-
1 files changed, 32 insertions(+), 43 deletions(-)
diff --git a/net/bootp.c b/net/bootp.c
index 4db63cb..4774624 100644
---
The SMSC95XX is a USB hub with a built-in Ethernet adapter. This adds support
for this, using the USB host network framework. The framework is extended to
support setting the hardware MAC address via an environment variable, since
SMSC95XX chips often have no EEPROM attached, and thus no MAC
The Asix driver takes the link down during init() and then brings it back up.
This commit changes this so that if a link has already been established
successfully we simply check that the link is still good.
This reduces the delay between successive network commands.
Signed-off-by: Simon Glass
From: Rob Herring rob.herr...@calxeda.com
This patch series enables common SDHCI and AHCI drivers for other platforms
to use.
The AHCI driver is modified to support non-PCI versions of the controller.
The Samsung s5p mmc driver appears to be the cleanest implementation of an
SDHCI controller
From: Rob Herring rob.herr...@calxeda.com
Move the register definitions into the sdhci.c file. Set the base
address from the board init code.
The Samsung SDHCI controller has extra registers. Make them conditional
on CONFIG_MMC_S5P.
Signed-off-by: Rob Herring rob.herr...@calxeda.com
---
From: Rob Herring rob.herr...@calxeda.com
The s5p mmc controller is a standard SDHCI controller with a few extra
registers. So rename it to reflect that and so other platforms can use it.
Signed-off-by: Rob Herring rob.herr...@calxeda.com
---
drivers/mmc/Makefile |3 +-
From: Rob Herring rob.herr...@calxeda.com
If the controller has an error condition, then stop polling for command
complete and exit mmc_send_cmd.
Signed-off-by: Rob Herring rob.herr...@calxeda.com
---
drivers/mmc/sdhci.c |4
1 files changed, 4 insertions(+), 0 deletions(-)
diff --git
From: Rob Herring rob.herr...@calxeda.com
The ata id string always needs swapping, not just on BE machines.
Signed-off-by: Rob Herring rob.herr...@calxeda.com
---
drivers/block/ahci.c |2 +-
1 files changed, 1 insertions(+), 1 deletions(-)
diff --git a/drivers/block/ahci.c
From: Rob Herring rob.herr...@calxeda.com
Add support for AHCI controllers that are not PCI based.
Signed-off-by: Rob Herring rob.herr...@calxeda.com
---
common/cmd_scsi.c|6 +++-
drivers/block/ahci.c | 62 +-
2 files changed, 60
Dear Mike Frysinger,
In message 20110600.50651.vap...@gentoo.org you wrote:
actually, if you dont mind, i'd like to obsolete this patch with the one
below. what do you think ?
Please submit it as a proper patch then.
Best regards,
Wolfgang Denk
--
DENX Software Engineering GmbH,
Dear Rob Herring,
In message 1306955427-18940-1-git-send-email-robherri...@gmail.com you wrote:
From: Rob Herring rob.herr...@calxeda.com
This patch series enables common SDHCI and AHCI drivers for other platforms
to use.
The AHCI driver is modified to support non-PCI versions of the
Dear Rob Herring,
In message 1306955427-18940-3-git-send-email-robherri...@gmail.com you wrote:
From: Rob Herring rob.herr...@calxeda.com
Move the register definitions into the sdhci.c file. Set the base
address from the board init code.
The Samsung SDHCI controller has extra registers.
Dear Rob Herring,
In message 1306955427-18940-6-git-send-email-robherri...@gmail.com you wrote:
From: Rob Herring rob.herr...@calxeda.com
Add support for AHCI controllers that are not PCI based.
...
+ memset((void *)ataid, 0, sizeof(hd_driveid_t *) * AHCI_MAX_PORTS);
This triggers a
Dear Fabio Estevam,
In message 1306953993-13430-1-git-send-email-fabio.este...@freescale.com you
wrote:
This fixes the MX31ADS build by using the new relocation scheme.
Signed-off-by: Fabio Estevam fabio.este...@freescale.com
...
+#define CONFIG_SYS_GBL_DATA_OFFSET
This fixes the MX31ADS build by using the new relocation scheme.
Signed-off-by: Fabio Estevam fabio.este...@freescale.com
---
Changes since v1:
- Fixed lines over 80 characters.
Build tested only.
Do not have the hardware handy to test.
board/freescale/mx31ads/mx31ads.c | 19
On 06/01/2011 02:25 PM, Wolfgang Denk wrote:
Dear Rob Herring,
In message1306955427-18940-1-git-send-email-robherri...@gmail.com you
wrote:
From: Rob Herringrob.herr...@calxeda.com
This patch series enables common SDHCI and AHCI drivers for other platforms
to use.
The AHCI driver is
Dear Marek Vasut,
In message 1305935305-25929-1-git-send-email-marek.va...@gmail.com you wrote:
Drop wepep250 board from MAINTAINERS and add all these three boards to
doc/README.scrapyard
Signed-off-by: Marek Vasut marek.va...@gmail.com
---
MAINTAINERS |4
Dear Mike Frysinger,
In message 1306207946-5626-1-git-send-email-vap...@gentoo.org you wrote:
The following changes since commit 5d1ee00b1fe1180503f6dfc10e87a6c6e74778f3:
.gitignore: update list of u-boot.* files and add *.bin (2011-05-22
23:46:26 +0200)
are available in the git
Dear Scott Wood,
In message 20110524210926.ga28...@schlenkerla.am.freescale.net you wrote:
The following changes since commit 5d1ee00b1fe1180503f6dfc10e87a6c6e74778f3:
.gitignore: update list of u-boot.* files and add *.bin (2011-05-22
23:46:26 +0200)
are available in the git
Dear Kumar Gala,
In message alpine.lfd.2.00.1105260933070.20...@right.am.freescale.net you
wrote:
The following changes since commit 7a82c208143bbc774ffcb4e53239410f867a0794:
Prepare v2011.06-rc1 (2011-05-19 22:23:50 +0200)
are available in the git repository at:
Dear Graeme Russ,
In message 4de0d3c2.50...@gmail.com you wrote:
A quick question for you - What defines what belongs in /lib versus /common?
/lib should be stuff that is called from (several, many) other files,
while /common is architecture independent code like the central main
loop,
Dear Sharath Kurudi,
In message BANLkTi=retwmsr-rg0j8tqf9v8xiyqa...@mail.gmail.com you wrote:
I am trying to port u-boot-2009.11-rc1 on 8308 processor. I get the
following prints on the terminal and the processor continuously resets
Please update and use current code instead.
Best
Dear Albert ARIBAUD,
In message 4de55027.3080...@aribaud.net you wrote:
Hi Wolfgang,
The following changes since commit 5d1ee00b1fe1180503f6dfc10e87a6c6e74778f3:
.gitignore: update list of u-boot.* files and add *.bin (2011-05-22
23:46:26 +0200)
are available in the git repository
Dear Nobuhiro Iwamatsu,
In message BANLkTik7qQdv41v5JhCPt+Z+BeH_ag-7=w...@mail.gmail.com you wrote:
Dear Wolfgang Denk.
Please pull u-boot-sh/master.
The following changes since commit 5d1ee00b1fe1180503f6dfc10e87a6c6e74778f3=
:
.gitignore: update list of u-boot.* files and add *.bin
Dear Enric Balletbo i Serra,
In message 1306911707-10564-1-git-send-email-eballe...@iseebcn.com you wrote:
At least on ARM the ipaddr is only set in board_init_r function. The
problem is if ipaddr is not defined in environment importing another
environment defined don't update the ipaddr
Dear Mike Frysinger,
In message 1302913525-18649-1-git-send-email-vap...@gentoo.org you wrote:
From: Patrick Sestier psest...@mircom.com
The status polling can take a while, so make sure we kick the
watchdog after each successful poll.
Signed-off-by: Patrick Sestier psest...@mircom.com
Hello Ben,
Thank you very much for your response.
On Wednesday, June 1, 2011, Ben Gardiner bengardi...@nanometrics.ca
On Wed, Jun 1, 2011 at 12:58 PM, Christian Riesch
christian.rie...@omicron.at wrote:
I have tried to run recent versions of u-boot on the da850evm (AM1808
eXperimenter's Kit)
Dear Albert,
In message 1304275463-23048-1-git-send-email...@denx.de I wrote:
The 'trab' board configuration is broken, and there is nobody who is
interested and willing to fix it. Drop it.
This includes support for VFD displays which have always been used by
this board only.
Dear Becky,
ping...
In message 20110504215341.a3af4126...@gemini.denx.de I wrote:
In message 1292627879-9027-4-git-send-email-bec...@kernel.crashing.org you
wrote:
Correct initdram to use phys_size_t to represent the size of
dram; instead of changing this all over the place, and
Dear Haojian Zhuang,
In message 1306137210-31942-1-git-send-email-haojian.zhu...@marvell.com you
wrote:
From: Haojian Zhuang haojian.zhu...@gmail.com
All data in dtb is big endian. Some ARM devices are little-endian.
In print_data(), it displays data with big-endian format. For ARM device,
Hi Christian,
On Wed, Jun 1, 2011 at 4:26 PM, Christian Riesch
christian.rie...@omicron.at wrote:
On Wednesday, June 1, 2011, Ben Gardiner bengardi...@nanometrics.ca
[...]
Last I heard about this [1] the AIS signer was unable to handle the
dynamic elf format resulting from the introduction of
On 06/01/2011 04:45 PM, Wolfgang Denk wrote:
Dear Haojian Zhuang,
In message1306137210-31942-1-git-send-email-haojian.zhu...@marvell.com you
wrote:
[snip]
Applied, thanks.
Gerald, I hope this is OK with you?
Yes.
Best regards,
Wolfgang Denk
Thanks,
gvb
This patch series adds bitfield operations to the Tegra code and modifies the
existing code to use them. These operations are highly desirable for many
reasons which I attempt to explain here.
U-Boot already has some basic macros for dealing with bitfields - setbits(),
clrbits() and family. These
Signed-off-by: Simon Glass s...@chromium.org
---
arch/arm/cpu/armv7/tegra2/ap20.c | 47 +---
arch/arm/include/asm/arch-tegra2/clk_rst.h | 39 ++-
board/nvidia/common/board.c| 13 ---
3 files changed, 25 insertions(+),
This adds an enum for each pin and some functions for changing the pin
muxing setup.
Signed-off-by: Simon Glass s...@chromium.org
---
arch/arm/cpu/armv7/tegra2/Makefile|2 +-
arch/arm/cpu/armv7/tegra2/pinmux.c| 54 ++
arch/arm/include/asm/arch-tegra2/pinmux.h | 156
To use these, set things up like this:
struct uart_ctlr *uart = (struct uart_ctlr *)UART_PA_START;
#define UART_PA_START 0x6700 /* Physical address of UART */
#define UART_FBCON_RANGE 5:3 /* Bit range for the FBCON field */
enum { /* An enum
These functions provide access to the high resolution microsecond timer
and tidy up a global variable in the code.
Signed-off-by: Simon Glass s...@chromium.org
---
arch/arm/cpu/armv7/tegra2/timer.c| 27 +--
arch/arm/include/asm/arch-tegra2/timer.h | 34
This adds functions to enable/disable clocks and reset to on-chip peripherals.
Signed-off-by: Simon Glass s...@chromium.org
---
arch/arm/cpu/armv7/tegra2/Makefile |2 +-
arch/arm/cpu/armv7/tegra2/ap20.c | 57 ++
arch/arm/cpu/armv7/tegra2/clock.c | 163
diff --git a/tools/Makefile b/tools/Makefile
index 623f908..f794ef1 100644
--- a/tools/Makefile
+++ b/tools/Makefile
@@ -96,11 +96,11 @@ OBJ_FILES-$(CONFIG_SHA1_CHECK_UB_IMG) += ubsha1.o
#endif
# Flattened device tree objects
-LIBFDT_OBJ_FILES-y += fdt.o
-LIBFDT_OBJ_FILES-y += fdt_ro.o
Hi, Phil.
Applied to next branch.
Thanks!
Nobuhiro
2011/6/1 Phil Edworthy phil.edwor...@renesas.com:
The rsk7264 (also know as rsk2+sh7264) is an SH2A based board
with 64MB NAND flash and 64MB SDRAM. It is very similar to the
rsk7203 board.
Signed-off-by: Phil Edworthy
Hello Mike,
Mike Frysinger wrote:
On Wednesday, June 01, 2011 02:54:30 Heiko Schocher wrote:
Wolfgang Denk wrote:
Heiko Schocher wrote:
--- a/post/drivers/memory.c
+++ b/post/drivers/memory.c
@@ -455,10 +455,30 @@ static int memory_post_tests (unsigned long start,
unsigned long size)
83 matches
Mail list logo