From: Jerry Huang chang-ming.hu...@freescale.com
In the current u-boot code, the value of these fields are the reserved
value (0b100), through the signal integrity measurement on freescale's
board with these reserved setting, the signal eye is out of the recommended
spec for non-transition
Configuring for kmeter1 board...
km83xx_i2c.c: In function 'i2c_make_abort':
km83xx_i2c.c:44:8: warning: variable 'dummy' set but not used
[-Wunused-but-set-variable]
Signed-off-by: Kim Phillips kim.phill...@freescale.com
---
board/keymile/km83xx/km83xx_i2c.c |3 +--
1 files changed, 1
Configuring for sbc8349 board...
spd_sdram.c: In function 'spd_sdram':
spd_sdram.c:152:41: warning: variable 'trfc_high' set but not used
[-Wunused-but-set-variable]
Signed-off-by: Kim Phillips kim.phill...@freescale.com
---
arch/powerpc/cpu/mpc83xx/spd_sdram.c |3 +--
1 files changed, 1
Configuring for MPC8360EMDS_66_HOST_33 - Board: MPC8360EMDS, Options:
CLKIN_66MHZ,PCI,PCI_33M,PQ_MDS_PIB=1
mpc8360emds.c: In function 'board_eth_init':
mpc8360emds.c:178:12: warning: array subscript is above array bounds
[-Warray-bounds]
Signed-off-by: Kim Phillips kim.phill...@freescale.com
Configuring for vme8349 board...
cmd_tsi148.c: In function 'tsi148_init':
cmd_tsi148.c:56:17: warning: variable 'lastError' set but not used
[-Wunused-but-set-variable]
Signed-off-by: Kim Phillips kim.phill...@freescale.com
---
common/cmd_tsi148.c |7 ++-
1 files changed, 2
Hello Kim,
Kim Phillips wrote:
Configuring for kmeter1 board...
km83xx_i2c.c: In function 'i2c_make_abort':
km83xx_i2c.c:44:8: warning: variable 'dummy' set but not used
[-Wunused-but-set-variable]
Signed-off-by: Kim Phillips kim.phill...@freescale.com
---
On Wed, 16 Nov 2011 15:36:25 +0800
chang-ming.hu...@freescale.com wrote:
From: Jerry Huang chang-ming.hu...@freescale.com
In the current u-boot code, the value of these fields are the reserved
value (0b100), through the signal integrity measurement on freescale's
board with these reserved
Hi Prafulla,
On Tue, Nov 08, 2011 at 10:31:14PM +0100, Simon Guinot wrote:
From: Simon Guinot simon.gui...@sequanux.org
Signed-off-by: Simon Guinot simon.gui...@sequanux.org
---
Changes in v2:
- fix asm-offsets.s removal
- make MAC address setup conditional to
This patch adds the support for new PIO controller introduced by some
AT91 SoCs.
New features include
* More peripheral multiplexing
* Pull-down, Schmitt trigger, Debouncer
* More irq trigger mode (may be not interesting in U-Boot)
Signed-off-by: Hong Xu hong...@atmel.com
---
Change for v3
*
On 12.11.2011 11:36, Jason Liu wrote:
Add the initial support for Freescale i.MX6Q Armadillo2 board
Support: MMC boot from slot 0/1, debug UART(UART4), usdhc.
...
diff --git a/include/configs/mx6qarm2.h b/include/configs/mx6qarm2.h
new file mode 100644
index 000..a4c7b31
--- /dev/null
On 12.11.2011 11:36, Jason Liu wrote:
This patch-set add the initial support for freescale i.mx6q support.
freescale i.mx6q is a quad core built on arm cortex_a9 complex.
With the mx6qarm2 config changes proposed some minutes ago:
Tested-by: Dirk Behme dirk.be...@de.bosch.com
Thanks
Dirk
On Wed, Nov 16, 2011 at 7:34 PM, Dirk Behme dirk.be...@de.bosch.com wrote:
On 12.11.2011 11:36, Jason Liu wrote:
Add the initial support for Freescale i.MX6Q Armadillo2 board
Support: MMC boot from slot 0/1, debug UART(UART4), usdhc.
...
diff --git a/include/configs/mx6qarm2.h
-Original Message-
From: Simon Guinot [mailto:si...@sequanux.org]
Sent: Wednesday, November 16, 2011 4:02 PM
To: Prafulla Wadaskar
Cc: u-boot@lists.denx.de
Subject: Re: [U-Boot] [PATCH v2] netspace_v2: Read Ethernet MAC
address from EEPROM
Hi Prafulla,
On Tue, Nov 08, 2011
Hello,
I'm currently using u-boot on a TI DM816x evaluation board (u-boot as
included in TI's EZSDK 5.02). I manually enabled CONFIG_CMD_DNS. However,
running dhcp followed by dns some_host_name only gave timeouts.
I found (using #define DEBUG) that DNS UDP queries are being sent to the
MAC of
On Wed, Nov 16, 2011 at 12:37 AM, Christian Riesch
christian.rie...@omicron.at wrote:
Hi Tom,
thanks for your comments!
On Tue, Nov 15, 2011 at 6:50 PM, Tom Rini tom.r...@gmail.com wrote:
On Tue, Nov 15, 2011 at 3:37 AM, Christian Riesch
christian.rie...@omicron.at wrote:
Signed-off-by:
The following changes since commit 75acc4d7c1c9081e06d1197c6da01361cf1bce92:
Heiko Schocher (1):
arm, davinci: add DAVINCI_MMC_CLKID
are available in the git repository at:
git://git.denx.de/u-boot-ti.git master
Sanjeev Premi (2):
part_efi: Fix compile errors
omap3evm:
On Tue, Nov 15, 2011 at 4:21 PM, Anatolij Gustschin ag...@denx.de wrote:
Fix:
davinci_i2c.c: In function 'flush_rx':
davinci_i2c.c:81:6: warning: variable 'dummy' set but not used
[-Wunused-but-set-variable]
Signed-off-by: Anatolij Gustschin ag...@denx.de
Cc: Heiko Schocher h...@denx.de
On Tuesday 15 November 2011 18:20:55 Anatolij Gustschin wrote:
- eir_reg = enc_r8(enc, CTL_REG_EIR);
+ (void)enc_r8(enc, CTL_REG_EIR);
is that (void) actually necessary ? last i looked, gcc didn't actually care.
which means you should drop the (void).
-mike
On Wednesday 16 November 2011 01:02:50 Simon Glass wrote:
grep -rs __bss_end__ * |wc
2151011 11552
grep -rs __bss_end * |wc
39 1952175
I think we should standardise on one or other of these. To me it feels
like __bss_end is correct, since we have __bss_start and
On Tuesday 15 November 2011 23:17:06 Simon Glass wrote:
--- a/arch/arm/cpu/arm920t/s3c24x0/usb_ohci.c
+++ b/arch/arm/cpu/arm920t/s3c24x0/usb_ohci.c
- __u32 datab[4];
- __u8 *data_buf = (__u8 *) datab;
+ union {
+ __u32 word[4];
+ __u16 hword[8];
+
Thierry Reding wrote at Wednesday, November 16, 2011 12:14 AM:
* Thierry Reding wrote:
* Simon Glass wrote:
[...]
If you are not implementing MMC, just remove it and all the MMC code
below.
I don't understand. What makes you think I don't want MMC? Both the Plutux
and the
Thierry Reding wrote at Tuesday, November 15, 2011 11:49 PM:
* PGP Signed by an unknown key
* Stephen Warren wrote:
Thierry Reding wrote at Tuesday, November 15, 2011 12:19 AM:
NVIDIA's flashing tools assume that the bootloader is loaded at address
0x00108000. Instead of requiring
Thierry,
-Original Message-
From: Thierry Reding [mailto:thierry.red...@avionic-design.de]
Sent: Wednesday, November 16, 2011 12:14 AM
To: Simon Glass
Cc: u-boot@lists.denx.de; Tom Warren
Subject: Re: [U-Boot] [PATCH v2 2/3] tegra2: Add Avionic Design Plutux support.
* PGP Signed by an
* Stephen Warren wrote:
Thierry Reding wrote at Tuesday, November 15, 2011 11:49 PM:
* PGP Signed by an unknown key
* Stephen Warren wrote:
Thierry Reding wrote at Tuesday, November 15, 2011 12:19 AM:
NVIDIA's flashing tools assume that the bootloader is loaded at address
* Stephen Warren wrote:
Thierry Reding wrote at Wednesday, November 16, 2011 12:14 AM:
* Thierry Reding wrote:
* Simon Glass wrote:
[...]
If you are not implementing MMC, just remove it and all the MMC code
below.
I don't understand. What makes you think I don't want
Hm...
it seems a subject as Help needed - urgently ends in too many spam
filters, so I'm reposting. This is actually serious.
In message 2015150119.1f8e41689...@gemini.denx.de I wrote:
Hello all,
I guess most of you will already have noticed that my activity on the
mailing list has
Dear Andy Fleming,
In message 1321134885-20735-1-git-send-email-aflem...@freescale.com you wrote:
The following changes since commit 5721385b187b3154c7768e6c182501022f4e2e45:
Merge branch 'master' of git://git.denx.de/u-boot-mpc83xx (2011-11-08
07:44:52 +0100)
are available in the git
Dear Heiko Schocher,
In message 4eba1018.9030...@denx.de you wrote:
Hello Wolfgang,
The following changes since commit 5721385b187b3154c7768e6c182501022f4e2e45:
Merge branch 'master' of git://git.denx.de/u-boot-mpc83xx (2011-11-08
07:44:52 +0100)
are available in the git repository
Dear Macpaul Lin,
In message caccg+xmnaz2elmeysnlgz21kpxcndo8u4i8dbfhrlhjw03i...@mail.gmail.com
you wrote:
Dear Wolfgang,
Could you please pull these 5 patches to your tree.
Thanks,
Macpaul
The following changes since commit 5721385b187b3154c7768e6c182501022f4e2e45:
Merge
Hello,
Our company represents an online platform of over 36.4 million people,
most of which are located in the US and Canada. What we do allows
us to present our online platform with a first choice when they search for
anything on any of the major search engines.
We seek a preferred source to
Dear Kumar Gala,
In message alpine.lfd.2.00.110817050.8...@right.am.freescale.net you
wrote:
The following changes since commit 5721385b187b3154c7768e6c182501022f4e2e45:
Merge branch 'master' of git://git.denx.de/u-boot-mpc83xx (2011-11-08
07:44:52 +0100)
are available in the git
Dear Jerry Van Baren,
In message 4ebff810.6080...@cideas.com you wrote:
Dear Wolfgang,
Please pull the bugfixes from the following changes since commit
5721385b187b3154c7768e6c182501022f4e2e45:
Merge branch 'master' of git://git.denx.de/u-boot-mpc83xx (2011-11-08
07:44:52 +0100)
Dear Simon Glass,
In message capnjgz0po2zdcghtd-dt0pnv3g6sfdzzjsutl_-6v1wq10a...@mail.gmail.com
you wrote:
We have built up quite a large number of patches which are currently
sitting in the Chromium tree - something like 200. If we continue to
dribble these out at 10-20 a month it will
The localbus controller node in the device tree is typically a root node,
even though the controller is part of CCSR. If we were to put the lbc
node under the SOC node, then the 'ranges' property in the lbc node would
translate through the 'ranges' property of the parent SOC node, and we
don't
On 11/16/2011 07:51 PM, Wolfgang Denk wrote:
Wolfgang,
Please let's try if this works. If you have any suggestions how to
help better, please don't hesitate to tell us.
I have tried with a couple of patches (network related), and then I
wanted to test if push works. As u-boot-staging
Dear Albert ARIBAUD,
In message 4ec2d979.6090...@aribaud.net you wrote:
Hi Wolfgang,
The following changes since commit 5721385b187b3154c7768e6c182501022f4e2e45:
Merge branch 'master' of git://git.denx.de/u-boot-mpc83xx (2011-11-08
07:44:52 +0100)
are available in the git
Dear Anatolij Gustschin,
In message 2016000607.43a91f9b@wker you wrote:
Hello Wolfgang,
The following changes since commit 5721385b187b3154c7768e6c182501022f4e2e45:
Merge branch 'master' of git://git.denx.de/u-boot-mpc83xx (2011-11-08
07:44:52 +0100)
are available in the git
Dear Stefano Babic,
In message 4ec4102d.2020...@denx.de you wrote:
I have tried with a couple of patches (network related), and then I
wanted to test if push works. As u-boot-staging should be open for all
custodians, I was expecting I should use the same mechanism, and then I
tried with:
Dear Stefano Babic,
In message 1320576159-1921-1-git-send-email-sba...@denx.de you wrote:
Fix:
ivm_core.c: In function 'ispVMLCOUNT':
ivm_core.c:2105:16: warning: unused variable 'usByte'
Signed-off-by: Stefano Babic sba...@denx.de
CC: Wolfgang Denk w...@denx.de
---
Dear Heiko Schocher,
In message 1320038153-24364-1-git-send-email...@denx.de you wrote:
Fix:
davinci_mmc.c: In function 'dmmc_wait_fifo_status':
davinci_mmc.c:72:7: warning: variable 'mmcstatus1' set but not used
[-Wunused-but-set-variable]
davinci_mmc.c: In function 'dmmc_busy_wait':
Dear Kumar Gala,
In message 1320855670-7289-1-git-send-email-ga...@kernel.crashing.org you
wrote:
Fix:
ahci.c: In function 'ata_scsiop_read10':
ahci.c:564:6: warning: variable 'lba' set but not used
[-Wunused-but-set-variable]
Signed-off-by: Kumar Gala ga...@kernel.crashing.org
---
... it's possible for the 'reg' property to be wrong.
Instead of all this, why doesn't u-boot just fix it?
I have the same annoyance with ccsrbar.
U-boot controls the ccsrbar address via a user configured #define.
So instead of having different dts's based on the u-boot ccsrbar,
why can't
Dear Kumar Gala,
In message 1320855670-7289-2-git-send-email-ga...@kernel.crashing.org you
wrote:
Fix:
x86emu/ops.c: In function 'x86emuOp_int3':
x86emu/ops.c:3521:9: warning: variable 'tmp' set but not used
[-Wunused-but-set-variable]
x86emu/ops.c: In function 'x86emuOp_int_IMM':
Swarthout Edward L-SWARTHOU wrote:
... it's possible for the 'reg' property to be wrong.
Instead of all this, why doesn't u-boot just fix it?
I have the same annoyance with ccsrbar.
U-boot controls the ccsrbar address via a user configured #define.
So instead of having different dts's
Dear Kumar Gala,
In message 1320855670-7289-3-git-send-email-ga...@kernel.crashing.org you
wrote:
Fix:
sata_sil3114.c: In function 'scan_sata':
sata_sil3114.c:793:7: warning: array subscript is above array bounds
[-Warray-bounds]
sata_sil3114.c:794:7: warning: array subscript is above
Dear Wolfgang Denk,
In message 1320866946-28235-1-git-send-email...@denx.de you wrote:
Fix:
sym53c8xx.c: In function 'scsi_write_dsp':
sym53c8xx.c:456:16: warning: variable 'val' set but not used
[-Wunused-but-set-variable]
Signed-off-by: Wolfgang Denk w...@denx.de
---
Dear Heiko Schocher,
In message 4ebb6ff4.5060...@denx.de you wrote:
Make checkpatch-clean
...
- unsigned int actualFreq, actualN=0, actualM=0;
+ unsigned int actualFreq, actualN = 0, actualM = 0;
Hmm.. we don't use Upper and Lower case mixed for variable names.
This should be
Dear Wolfgang Denk,
In message 1320866946-28235-2-git-send-email...@denx.de you wrote:
Make checkpatch-clean
Signed-off-by: Wolfgang Denk w...@denx.de
Cc: Eran Man e...@nbase.co.il
---
board/evb64260/i2c.c | 48 ++--
1 files changed, 22
On 11/16/2011 01:58 PM, Swarthout Edward L-SWARTHOU wrote:
... it's possible for the 'reg' property to be wrong.
Instead of all this, why doesn't u-boot just fix it?
I have the same annoyance with ccsrbar.
U-boot controls the ccsrbar address via a user configured #define.
So instead of
Dear Wolfgang Denk,
In message 1320866946-28235-3-git-send-email...@denx.de you wrote:
Fix:
i2c.c: In function 'i2c_init':
i2c.c:23:15: warning: variable 'actualFreq' set but not used
[-Wunused-but-set-variable]
Signed-off-by: Wolfgang Denk w...@denx.de
Cc: Eran Man e...@nbase.co.il
---
Dear Wolfgang Denk,
In message 1320866946-28235-4-git-send-email...@denx.de you wrote:
Fix:
evb64260.c: In function 'debug_led':
evb64260.c:363:6: warning: variable 'dummy' set but not used
[-Wunused-but-set-variable]
Signed-off-by: Wolfgang Denk w...@denx.de
---
Dear Wolfgang Denk,
In message 1320866946-28235-5-git-send-email...@denx.de you wrote:
Fix:
eth.c: In function 'gt6426x_handle_SMI':
eth.c:130:15: warning: variable 'psr' set but not used
[-Wunused-but-set-variable]
Signed-off-by: Wolfgang Denk w...@denx.de
---
board/evb64260/eth.c |
Dear Wolfgang Denk,
In message 1320866946-28235-6-git-send-email...@denx.de you wrote:
Fix:
sdram_init.c: In function 'setup_sdram_common':
sdram_init.c:333:49: warning: variable 'ecc' set but not used
[-Wunused-but-set-variable]
sdram_init.c: In function 'setup_sdram':
sdram_init.c:410:13:
Dear Wolfgang Denk,
In message 1320866946-28235-7-git-send-email...@denx.de you wrote:
Make (mostly) checkpatch-clean
Signed-off-by: Wolfgang Denk w...@denx.de
---
board/evb64260/zuma_pbb_mbox.c | 256
+---
1 files changed, 132 insertions(+), 124
Dear Wolfgang Denk,
In message 1320866946-28235-8-git-send-email...@denx.de you wrote:
Fix:
zuma_pbb_mbox.c: In function 'zuma_mbox_dump':
zuma_pbb_mbox.c:115:2: warning: dereferencing type-punned pointer will
break strict-aliasing rules [-Wstrict-aliasing]
zuma_pbb_mbox.c:117:2: warning:
Dear Wolfgang Denk,
In message 1320866946-28235-9-git-send-email...@denx.de you wrote:
Fix:
cmd_fdc.c: In function 'fdc_read_data':
cmd_fdc.c:435:6: warning: variable 'flags' set but not used
[-Wunused-but-set-variable]
cmd_fdc.c:432:16: warning: variable 'pcn' set but not used
Dear Wolfgang Denk,
In message 1320866946-28235-10-git-send-email...@denx.de you wrote:
Fix:
cmd_universe.c: In function 'universe_init':
cmd_universe.c:49:17: warning: variable 'lastError' set but not used
[-Wunused-but-set-variable]
Signed-off-by: Wolfgang Denk w...@denx.de
---
Dear Wolfgang Denk,
In message 1320866946-28235-12-git-send-email...@denx.de you wrote:
ThE code recorded error conditions but did not pass these on to the
higher level caller. Fixing this fixes also this build warning:
cpci750.c: In function 'do_loadpci':
cpci750.c:569:6: warning: variable
Dear Mike Frysinger,
In message 20091545.07892.vap...@gentoo.org you wrote:
static int check_dimm (uchar slot, AUX_MEM_DIMM_INFO * dimmInfo)
{
+#if 0
unsigned long spd_checksum;
-
+#endif
forgot to just delete ?
Indeed. Will do in commit.
Best regards,
Wolfgang Denk
Dear Wolfgang Denk,
In message 1320866946-28235-13-git-send-email...@denx.de you wrote:
Fix:
sdram_init.c: In function 'check_dimm':
sdram_init.c:267:50: warning: variable 'trrd_clocks' set but not used
[-Wunused-but-set-variable]
sdram_init.c:267:37: warning: variable 'tras_clocks' set but
Dear Anatolij Gustschin,
In message 1320963704-568-1-git-send-email-ag...@denx.de you wrote:
Fix:
pci.c: In function 'pci_init_board':
pci.c:55:26: warning: variable 'pci_conf' set but not used
[-Wunused-but-set-variable]
Signed-off-by: Anatolij Gustschin ag...@denx.de
---
Dear beneficiary,
This is to re-notify you of the $600,000.00 USD that was deposited here in the
western union office in your favour is available for pickup.
Contact us via email for your M.T.C.N Numbers.
Contact Person: Mr.David Churchill
Tel. +44 703 186 0768
Tel. +44 703 596 3267
Email: (
Dear Anatolij Gustschin,
In message 1320963704-568-2-git-send-email-ag...@denx.de you wrote:
Fix:
i2c.c: In function 'wait_for_bb':
i2c.c:81:16: warning: variable 'temp' set but not used
[-Wunused-but-set-variable]
Signed-off-by: Anatolij Gustschin ag...@denx.de
---
Dear Stefan Roese,
In message 1321380105-6159-1-git-send-email...@denx.de you wrote:
Fix:
usb_ohci.c: In function 'dl_transfer_length':
usb_ohci.c:756:8: warning: variable 'tdINFO' set but not used
[-Wunused-but-set-variable]
Signed-off-by: Stefan Roese s...@denx.de
---
Dear Stefan Roese,
In message 1321380124-6304-1-git-send-email...@denx.de you wrote:
Fix:
4xx_pcie.c: In function 'pcie_read_config':
4xx_pcie.c:230:6: warning: variable 'address' set but not used
[-Wunused-but-set-variable]
4xx_pcie.c: In function 'pcie_write_config':
4xx_pcie.c:290:6:
Dear Stefan Roese,
In message 1321380131-6351-1-git-send-email...@denx.de you wrote:
Fix:
4xx_ibm_ddr2_autocalib.c: In function 'get_membase':
4xx_ibm_ddr2_autocalib.c:157:8: warning: variable 'bxcf' set but not used
[-Wunused-but-set-variable]
4xx_ibm_ddr2_autocalib.c: In function
Dear Stefan Roese,
In message 1321380138-6398-1-git-send-email...@denx.de you wrote:
Fix:
cmd_ecctest.c: In function 'inject_ecc_error':
cmd_ecctest.c:116:6: warning: variable 'val' set but not used
[-Wunused-but-set-variable]
cmd_ecctest.c: In function 'rewrite_ecc_parity':
Hi Wolfgang,
Am Donnerstag 10 November 2011, 12:44:26 schrieb Wolfgang Denk:
Dear Prafulla,
In message 48935aa530a6457b76b9915a1fe7faf9.squir...@ssl.serverraum.org
Michael Walle wrote:
So was there any conclusion, now? Never touch mvgbe.c anymore?
Let's remove this broken code.
Dear Stefan Roese,
In message 1321380144-6445-1-git-send-email...@denx.de you wrote:
Fix:
44x_spd_ddr.c: In function 'program_cfg0':
44x_spd_ddr.c:384:16: warning: variable 'dimm_64bit' set but not used
[-Wunused-but-set-variable]
44x_spd_ddr.c:383:16: warning: variable 'dimm_32bit' set but
Dear Stefan Roese,
In message 1321380150-6492-1-git-send-email...@denx.de you wrote:
44x_spd_ddr2.c: In function 'initdram':
44x_spd_ddr2.c:450:17: warning: variable 'dimm_spd' set but not used
[-Wunused-but-set-variable]
44x_spd_ddr2.c: In function 'program_copt1':
44x_spd_ddr2.c:1003:16:
Dear Stefan Roese,
In message 1321380157-6539-1-git-send-email...@denx.de you wrote:
Fix:
40x_spd_sdram.c: In function 'spd_sdram':
40x_spd_sdram.c:137:6: warning: variable 'sdram0_b3cr' set but not used
[-Wunused-but-set-variable]
40x_spd_sdram.c:136:6: warning: variable 'sdram0_b2cr' set
Dear Stefan Roese,
In message 1321380163-6587-1-git-send-email...@denx.de you wrote:
Fix:
20001122-1.c: In function 'fpu_post_test_math1':
20001122-1.c:37:22: warning: variable 'p' set but not used
[-Wunused-but-set-variable]
Signed-off-by: Stefan Roese s...@denx.de
---
Dear Stefan Roese,
In message 1321380169-6634-1-git-send-email...@denx.de you wrote:
Fix:
sata_dwc.c: In function 'sata_dwc_softreset':
sata_dwc.c:444:5: warning: variable 'status' set but not used
[-Wunused-but-set-variable]
sata_dwc.c:443:6: warning: variable 'serror' set but not used
Dear Stefan Roese,
In message 1321380174-6687-1-git-send-email...@denx.de you wrote:
Fix:
nand_boot.c: In function 'nand_read_page':
nand_boot.c:190:6: warning: variable 'stat' set but not used
[-Wunused-but-set-variable]
nand_boot.c: In function 'nand_boot':
nand_boot.c:271:6: warning:
Dear Stefan Roese,
In message 1321380180-6735-1-git-send-email...@denx.de you wrote:
Fix:
dlvision-10g.c: In function 'print_fpga_info':
dlvision-10g.c:90:11: warning: variable 'feature_compression' set but not
used [-Wunused-but-set-variable]
Signed-off-by: Stefan Roese s...@denx.de
---
Dear Stefan Roese,
In message 1321380186-6782-1-git-send-email...@denx.de you wrote:
Fix:
cmd_pci405.c: In function 'do_loadpci':
cmd_pci405.c:45:6: warning: variable 'status' set but not used
[-Wunused-but-set-variable]
Signed-off-by: Stefan Roese s...@denx.de
---
Dear Stefan Roese,
In message 1321380200-6833-1-git-send-email...@denx.de you wrote:
Fix:
cmd_dasa_sim.c: In function 'updatePci9054':
cmd_dasa_sim.c:135:6: warning: variable 'val' set but not used
[-Wunused-but-set-variable]
cmd_dasa_sim.c: In function 'clearPci9054':
Dear Stefan Roese,
In message 1321380207-6889-1-git-send-email...@denx.de you wrote:
Fix:
iop480_uart.c: In function 'serial_init':
iop480_uart.c:137:16: warning: variable 'val' set but not used
[-Wunused-but-set-variable]
Signed-off-by: Stefan Roese s...@denx.de
---
Dear Stefan Roese,
In message 1321380213-6938-1-git-send-email...@denx.de you wrote:
Fix:
../common/auto_update.c: In function 'au_check_header_valid':
../common/auto_update.c:94:16: warning: variable 'checksum' set but not used
[-Wunused-but-set-variable]
../common/auto_update.c: In
Dear Stefan Roese,
In message 1321380219-6986-1-git-send-email...@denx.de you wrote:
Fix:
mip405.c: In function 'init_sdram':
mip405.c:250:4: warning: variable 'tctp_clocks' set but not used
[-Wunused-but-set-variable]
mip405.c: In function 'initdram':
mip405.c:629:9: warning: variable
Dear Stefan Roese,
In message 1321380225-7033-1-git-send-email...@denx.de you wrote:
Fix:
pip405.c: In function 'board_early_init_f':
pip405.c:192:16: warning: variable 'tctp_clocks' set but not used
[-Wunused-but-set-variable]
pip405.c:182:16: warning: variable 'dataout' set but not used
Dear Michael Walle,
In message 20162115.0.mich...@walle.cc you wrote:
Could you please revise your assessment? I would really appreciate if
we could clean this up.
Regarding Prafulla's NAK?
Yes - I'd really appreciate if Prafulla woudl withdraw his NAK, and
agree on a cleanup.
Dear Anatolij Gustschin,
In message 1321399263-13826-2-git-send-email-ag...@denx.de you wrote:
Fix:
atmel_spi.c: In function 'spi_xfer':
atmel_spi.c:139:7: warning: variable 'ret' set but not used
[-Wunused-but-set-variable]
Signed-off-by: Anatolij Gustschin ag...@denx.de
---
Dear Anatolij Gustschin,
In message 1321399263-13826-3-git-send-email-ag...@denx.de you wrote:
Fix:
dataflash.c: In function 'AT91F_DataflashInit':
dataflash.c:42:6: warning: variable 'last_part' set but not used
[-Wunused-but-set-variable]
Signed-off-by: Anatolij Gustschin ag...@denx.de
Dear Anatolij Gustschin,
In message 1321399263-13826-4-git-send-email-ag...@denx.de you wrote:
Fix:
at91_emac.c: In function 'at91emac_write_hwaddr':
at91_emac.c:477:15: warning: variable 'dev' set but not used
[-Wunused-but-set-variable]
Signed-off-by: Anatolij Gustschin ag...@denx.de
* Stephen Warren wrote:
Pass the GPIO numbers for power and card detect to tegra2_mmc_init(), and
modify that function to perform all required GPIO initialization. This
removes the need for board files to perform these operations.
Move board_mmc_getcd() into tegra2_mmc.c now that the driver
Dear Anatolij Gustschin,
In message 1321399263-13826-5-git-send-email-ag...@denx.de you wrote:
Fix:
enc28j60.c: In function 'enc_receive':
enc28j60.c:435:5: warning: variable 'eir_reg' set but not used
[-Wunused-but-set-variable]
enc28j60.c: In function 'enc_poll':
enc28j60.c:503:5:
Dear Mike Frysinger,
In message 20161058.57150.vap...@gentoo.org you wrote:
On Tuesday 15 November 2011 18:20:55 Anatolij Gustschin wrote:
- eir_reg = enc_r8(enc, CTL_REG_EIR);
+ (void)enc_r8(enc, CTL_REG_EIR);
is that (void) actually necessary ? last i looked,
___
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
Dear Anatolij Gustschin,
In message 1321399263-13826-6-git-send-email-ag...@denx.de you wrote:
Fix:
flash.c: In function 'flash_erase':
flash.c:209:6: warning: variable 'flag' set but not used
[-Wunused-but-set-variable]
flash.c: In function 'write_data':
flash.c:373:6: warning: variable
Dear Anatolij Gustschin,
In message 1321399263-13826-7-git-send-email-ag...@denx.de you wrote:
Fix:
flash.c: In function 'flash_erase':
flash.c:209:6: warning: variable 'flag' set but not used
[-Wunused-but-set-variable]
flash.c: In function 'write_data':
flash.c:373:6: warning: variable
Dear Anatolij Gustschin,
In message 1321399263-13826-8-git-send-email-ag...@denx.de you wrote:
Fix:
da8xx-fb.c: In function 'video_hw_init':
da8xx-fb.c:688:6: warning: variable 'ret' set but not used
[-Wunused-but-set-variable]
Signed-off-by: Anatolij Gustschin ag...@denx.de
---
Dear Anatolij Gustschin,
In message 1321399263-13826-9-git-send-email-ag...@denx.de you wrote:
Fix:
bus_vcxk.c: In function 'vcxk_display_bitmap':
bus_vcxk.c:396:16: warning: variable 'compression' set but not used
[-Wunused-but-set-variable]
Signed-off-by: Anatolij Gustschin ag...@denx.de
Dear Anatolij Gustschin,
In message 1321399263-13826-11-git-send-email-ag...@denx.de you wrote:
Fix:
pwm.c: In function 'pwm_config':
pwm.c:85:16: warning: variable 'timer_rate_hz' set but not used
[-Wunused-but-set-variable]
Signed-off-by: Anatolij Gustschin ag...@denx.de
---
Dear Anatolij Gustschin,
In message 1321399263-13826-12-git-send-email-ag...@denx.de you wrote:
Fix:
yaffs_guts.c: In function 'yaffs_CheckChunkErased':
yaffs_guts.c:854:6: warning: variable 'result' set but not used
yaffs_guts.c: In function 'yaffs_UpdateObjectHeader':
yaffs_guts.c:3463:6:
Dear Anatolij Gustschin,
In message 1321399263-13826-13-git-send-email-ag...@denx.de you wrote:
Fix:
s3c24x0_rtc.c: In function 'rtc_get':
s3c24x0_rtc.c:67:53: warning: variable 'a_armed' set but not used
s3c24x0_rtc.c:67:45: warning: variable 'a_year' set but not used
s3c24x0_rtc.c:67:38:
On Nov 15, 2011, at 9:01 AM, Wolfgang Denk wrote:
Hello all,
I guess most of you will already have noticed that my activity on the
mailing list has significantly declined recently. I'm sorry for that,
but I find myself in a situation where I have even less time
available for U-Boot than
Dear Simon Glass,
In message 1321417027-5639-2-git-send-email-...@chromium.org you wrote:
Sorry if this is already fixed somewhere - I could not find it.
This fixes the warnings show below.
yaffs_tagscompat.c: In function
'yaffs_TagsCompatabilityReadChunkWithTagsFromNAND':
Dear Kim Phillips,
In message 1321433993-2488-1-git-send-email-kim.phill...@freescale.com you
wrote:
Configuring for sbc8349 board...
spd_sdram.c: In function 'spd_sdram':
spd_sdram.c:152:41: warning: variable 'trfc_high' set but not used
[-Wunused-but-set-variable]
Signed-off-by: Kim
Dear Kim Phillips,
In message 1321433993-2488-3-git-send-email-kim.phill...@freescale.com you
wrote:
Configuring for kmeter1 board...
km83xx_i2c.c: In function 'i2c_make_abort':
km83xx_i2c.c:44:8: warning: variable 'dummy' set but not used
[-Wunused-but-set-variable]
Signed-off-by: Kim
1 - 100 of 137 matches
Mail list logo
