On Wed, Jan 18, 2012 at 11:21 PM, Igor Grinberg grinb...@compulab.co.il wrote:
Hi Govindraj,
On 01/17/12 08:10, Govindraj wrote:
And just to clarify further there is no code duplication for ulpi read writes
in ehci-omap.c done with this patch.
This is not just about code duplication,
this
From: Eric Miao eric.m...@linaro.org
Ignore the return value of eth_getenv_enetaddr_by_index(), and if it
fails, fall back to use dev-enetaddr, which could be filled up by
the ethernet device driver:
With the current code, introduced with below commit, eth_write_hwaddr()
will fail immediately if
On 12/26/2011 08:34 AM, Dirk Behme wrote:
From: Jason Liu jason@linaro.org
Add the initial support for Freescale i.MX6Q Sabre Lite board
Signed-off-by: Dirk Behme dirk.be...@de.bosch.com
CC: Jason Liu jason@linaro.org
CC: Eric Nelson eric.nel...@boundarydevices.com
---
...
There are tools that automatically extract this information, so better
make it up to date.
Signed-off-by: Wolfgang Denk w...@denx.de
---
README |2 +-
1 files changed, 1 insertions(+), 1 deletions(-)
diff --git a/README b/README
index 9d713e8..4343057 100644
--- a/README
+++ b/README
@@
Hi Sughosh,
On Thursday 19 January 2012 12:23 PM, Sughosh Ganu wrote:
On Tue Jan 17, 2012 at 08:27:58AM -0700, Tom Rini wrote:
On Mon, Jan 16, 2012 at 11:46 PM, Sughosh Ganuurwithsugh...@gmail.com wrote:
Hmm.. how did u-boot work on such boards? How can u-boot work with D-Cache
enabled, if
Dear Wolfgang,
On 19.01.2012 10:58, Wolfgang Grandegger wrote:
On 12/26/2011 08:34 AM, Dirk Behme wrote:
From: Jason Liu jason@linaro.org
Add the initial support for Freescale i.MX6Q Sabre Lite board
Signed-off-by: Dirk Behme dirk.be...@de.bosch.com
CC: Jason Liu jason@linaro.org
CC:
On 18/01/2012 21:05, Eric Nelson wrote:
Yes, you're right - of course, I am open also to other solutions if they
are proofed to be better ;-).
I think this is about as good as things get with the current code base.
I would argue that the driver would be better if it explicitly supported
Dear Simon Glass,
In message capnjgz1royguaascoqiw8poqkzvp5rim7kj6zzhlnpwubyk...@mail.gmail.com
you wrote:
Perhaps reword this slightly. U-Boot can have knowledge of a current
adaptor, mux settings and so on, and use this internally within the
i2c layer to optimise performance and redundant
Hi Aneesh,
On Thu, Jan 19, 2012 at 11:17 AM, Aneesh V ane...@ti.com wrote:
On Thursday 19 January 2012 12:23 PM, Sughosh Ganu wrote:
Tried a few things on my end.
* Read the D-cache value in the spl, and confirmed that the data
cache is indeed not enabled.
What is the value of the B
On Thursday 19 January 2012 05:00 PM, Christian Riesch wrote:
Hi Aneesh,
On Thu, Jan 19, 2012 at 11:17 AM, Aneesh Vane...@ti.com wrote:
On Thursday 19 January 2012 12:23 PM, Sughosh Ganu wrote:
Tried a few things on my end.
* Read the D-cache value in the spl, and confirmed that the
On 11/14/2011 12:21 PM, Stefano Babic wrote:
index
..efdbb4d097abb7ba7ac69e6960030ecb7e19e3cc
GIT binary patch
literal 27238
zcmeHOy^Acz5uaWoLJ0ZujP@0PdgP#8He4unIaT(SOx7YM9CSOO=;nM0*c491zk
znZd!sT%ZS3tk12n3Q7gFf_Vg~|0{Hvh9UuW8R_dxre6UW@oymKYsPAuCDH$
Hi Troy,
On 13.01.2012 13:10, Dirk Behme wrote:
From: Troy Kisky troy.ki...@boundarydevices.com
Previously, only GIGE phy was supported in this function.
Signed-off-by: Troy Kisky troy.ki...@boundarydevices.com
CC: Troy Kisky troy.ki...@boundarydevices.com
CC: Stefano Babic sba...@denx.de
CC:
On 15.01.2012 01:56, Mike Frysinger wrote:
On Friday 13 January 2012 07:10:02 Dirk Behme wrote:
common/miiphyutil.c | 18 +-
1 files changed, 17 insertions(+), 1 deletions(-)
this is dead code ... i think we're pushing people to use the name phy
framework rather than
On 19.01.2012 13:38, Dirk Behme wrote:
On 15.01.2012 01:56, Mike Frysinger wrote:
On Friday 13 January 2012 07:10:02 Dirk Behme wrote:
common/miiphyutil.c | 18 +-
1 files changed, 17 insertions(+), 1 deletions(-)
this is dead code ... i think we're pushing people to use the
Olof Johansson wrote at Wednesday, January 18, 2012 10:32 PM:
On Wed, Jan 18, 2012 at 05:16:52PM -0700, Stephen Warren wrote:
diff --git a/Documentation/devicetree/bindings/clock/nvidia,tegra20-car.txt
+* NVIDIA Tegra20 Clock And Reset Controller
+
+This binding uses the common clock
Olof Johansson wrote at Thursday, January 19, 2012 12:13 AM:
On Wed, Jan 18, 2012 at 10:59 PM, Simon Glass s...@chromium.org wrote:
Hi Olof,
On Wed, Jan 18, 2012 at 10:41 PM, Olof Johansson o...@lixom.net wrote:
Hi,
On Wed, Jan 18, 2012 at 9:55 PM, Simon Glass s...@chromium.org wrote:
Hi Heiko,
On Wed, Jan 18, 2012 at 11:53 PM, Heiko Schocher h...@denx.de wrote:
Hello Simon,
Simon Glass wrote:
Hi Heiko,
On Wed, Jan 18, 2012 at 10:35 PM, Heiko Schocher h...@denx.de wrote:
Hello Wolfgang, Timur, Simon,
Wolfgang Denk wrote:
Dear Simon Glass,
In message
Hi Wolfgang,
On Thu, Jan 19, 2012 at 3:20 AM, Wolfgang Denk w...@denx.de wrote:
Dear Simon Glass,
In message
capnjgz1royguaascoqiw8poqkzvp5rim7kj6zzhlnpwubyk...@mail.gmail.com you
wrote:
Perhaps reword this slightly. U-Boot can have knowledge of a current
adaptor, mux settings and so
On Thursday 19 January 2012 07:38:44 Dirk Behme wrote:
On 15.01.2012 01:56, Mike Frysinger wrote:
On Friday 13 January 2012 07:10:02 Dirk Behme wrote:
common/miiphyutil.c | 18 +-
1 files changed, 17 insertions(+), 1 deletions(-)
this is dead code ... i think we're
On Thursday 19 January 2012 11:19:52 Dirk Behme wrote:
On 19.01.2012 13:38, Dirk Behme wrote:
On 15.01.2012 01:56, Mike Frysinger wrote:
On Friday 13 January 2012 07:10:02 Dirk Behme wrote:
common/miiphyutil.c | 18 +-
1 files changed, 17 insertions(+), 1 deletions(-)
Wolfgang Denk wrote:
As mentioned before, this is what we currently have as device model
in U-Boot - not only I2C: we have the same current device concept
with IDE, USB, ...
The difference is that I2C operations are typically done internally by
other code, whereas IDE, USB, etc are done by the
On 01/12/2012 12:00 PM, Simon Glass wrote:
Some devices can deal with multiple compatible properties. The devices
need to know which nodes to bind to which features. For example an
I2C driver which supports two different controller types will want to
know which type it is dealing with in each
On 01/12/2012 12:00 PM, Simon Glass wrote:
Add U-Boot's peripheral clock information to the Tegra20 device tree file.
diff --git a/arch/arm/dts/tegra20.dtsi b/arch/arm/dts/tegra20.dtsi
index ca7b523..963cf27 100644
--- a/arch/arm/dts/tegra20.dtsi
+++ b/arch/arm/dts/tegra20.dtsi
@@ -45,6
On 01/12/2012 12:00 PM, Simon Glass wrote:
Select the port ordering for I2C on Seaboard.
Signed-off-by: Simon Glass s...@chromium.org
Acked-by: Stephen Warren swar...@nvidia.com
This isn't the patch that I ack'd.
diff --git a/board/nvidia/dts/tegra2-seaboard.dts
On 01/12/2012 12:00 PM, Simon Glass wrote:
From: Yen Lin ye...@nvidia.com
Add basic i2c driver for Tegra2 with 8- and 16-bit address support.
The driver requires CONFIG_OF_CONTROL to obtain its configuration
from the device tree.
(Simon Glass: s...@chromium.org modified for upstream)
On 01/13/2012 02:35 PM, Simon Glass wrote:
We want to know which type of chip we are running on - the Tegra
family has several SKUs. This can be determined by reading a
fuse register, so add this function to ap20.
Signed-off-by: Simon Glass s...@chromium.org
Acked-by: Stephen Warren
On 01/13/2012 02:35 PM, Simon Glass wrote:
From: Jimmy Zhang jimmzh...@nvidia.com
Add support for setting up the memory controller parameters. Boards
can set up an appropriate table in the device tree.
Signed-off-by: Simon Glass s...@chromium.org
---
Changes in v2:
- Add debug() output
On 01/13/2012 02:35 PM, Simon Glass wrote:
From: Yen Lin ye...@nvidia.com
Add code to set up the warm boot area in the Tegra CPU ready for a
resume after suspend.
Signed-off-by: Simon Glass s...@chromium.org
Acked-by: Stephen Warren swar...@nvidia.com
--
nvpublic
On 01/13/2012 02:35 PM, Simon Glass wrote:
This enables LP0 to support suspend / resume on Seaboard.
Signed-off-by: Simon Glass s...@chromium.org
FYI, I've read through all the patches in this series and besides the
comments I've already made, I think they're OK. I didn't review some of
the
On 01/13/2012 04:10 PM, Simon Glass wrote:
Add selection of NAND flash pins to the funcmux.
Signed-off-by: Simon Glass s...@chromium.org
Acked-by: Stephen Warren swar...@nvidia.com
--
nvpublic
___
U-Boot mailing list
U-Boot@lists.denx.de
Folks,
Simon and Stephen have been talking offline about Simon's fdt patches, to wit:
U-Boot-v3-1-2-fdt-Add-fdtdec_find_aliases-to-deal-with-alias-nodes.patch
U-Boot-v3-2-2-fdt-Add-tests-for-fdtdec.patch
U-Boot-v4-01-20-fdt-Tidy-up-a-few-fdtdec-problems.patch
Hi Stephen,
On Thu, Jan 19, 2012 at 12:49 PM, Stephen Warren swar...@nvidia.com wrote:
On 01/12/2012 12:00 PM, Simon Glass wrote:
Some devices can deal with multiple compatible properties. The devices
need to know which nodes to bind to which features. For example an
I2C driver which supports
Hi Stephen,
On Wed, Jan 18, 2012 at 2:24 PM, Stephen Warren swar...@nvidia.com wrote:
On 01/11/2012 09:32 PM, Simon Glass wrote:
This was taken from commit b48c54e2 at:
git://git.kernel.org/pub/scm/linux/kernel/git/olof/tegra.git
config.mk is updated to provide this file to boards through
Hi Stephen,
On Wed, Jan 18, 2012 at 2:30 PM, Stephen Warren swar...@nvidia.com wrote:
On 01/11/2012 09:32 PM, Simon Glass wrote:
Add a directory to hold device tree binding files, to permit easy review
of this material in U-Boot patches.
Signed-off-by: Simon Glass s...@chromium.org
diff
Hi Stephen,
On Wed, Jan 18, 2012 at 4:30 PM, Stephen Warren swar...@nvidia.com wrote:
On 01/11/2012 09:33 PM, Simon Glass wrote:
This adds basic USB support for port 0. The other port is not supported
yet.
diff --git a/board/nvidia/common/board.c b/board/nvidia/common/board.c
+#ifdef
Hi Stephen,
On Wed, Jan 18, 2012 at 4:19 PM, Stephen Warren swar...@nvidia.com wrote:
On 01/11/2012 09:33 PM, Simon Glass wrote:
This adds clock references to the USB part of the device tree for U-Boot.
The USB timing information may vary between boards sometimes, but for
now we hard-code it
Hi Stephen,
On Wed, Jan 18, 2012 at 4:43 PM, Stephen Warren swar...@nvidia.com wrote:
On 01/11/2012 09:33 PM, Simon Glass wrote:
This adds basic support for the Tegra2 USB controller. Board files should
call board_usb_init() to set things up.
diff --git a/arch/arm/cpu/armv7/tegra2/usb.c
Hi,
On Thu, Jan 19, 2012 at 9:33 AM, Stephen Warren swar...@nvidia.com wrote:
Olof Johansson wrote at Thursday, January 19, 2012 12:13 AM:
On Wed, Jan 18, 2012 at 10:59 PM, Simon Glass s...@chromium.org wrote:
Hi Olof,
On Wed, Jan 18, 2012 at 10:41 PM, Olof Johansson o...@lixom.net wrote:
Hi Stephen,
On Thu, Jan 19, 2012 at 1:58 PM, Stephen Warren swar...@nvidia.com wrote:
On 01/13/2012 02:35 PM, Simon Glass wrote:
From: Jimmy Zhang jimmzh...@nvidia.com
Add support for setting up the memory controller parameters. Boards
can set up an appropriate table in the device tree.
On 01/19/2012 04:51 PM, Simon Glass wrote:
Hi Stephen,
On Wed, Jan 18, 2012 at 2:24 PM, Stephen Warren swar...@nvidia.com wrote:
On 01/11/2012 09:32 PM, Simon Glass wrote:
This was taken from commit b48c54e2 at:
git://git.kernel.org/pub/scm/linux/kernel/git/olof/tegra.git
config.mk is
On 01/19/2012 04:59 PM, Simon Glass wrote:
Hi Stephen,
On Thu, Jan 19, 2012 at 1:58 PM, Stephen Warren swar...@nvidia.com wrote:
On 01/13/2012 02:35 PM, Simon Glass wrote:
From: Jimmy Zhang jimmzh...@nvidia.com
Add support for setting up the memory controller parameters. Boards
can set up
On 01/19/2012 04:45 PM, Simon Glass wrote:
Hi Stephen,
On Thu, Jan 19, 2012 at 12:49 PM, Stephen Warren swar...@nvidia.com wrote:
On 01/12/2012 12:00 PM, Simon Glass wrote:
Some devices can deal with multiple compatible properties. The devices
need to know which nodes to bind to which
Hi Stephen,
On Thu, Jan 19, 2012 at 4:17 PM, Stephen Warren swar...@nvidia.com wrote:
On 01/19/2012 04:45 PM, Simon Glass wrote:
Hi Stephen,
On Thu, Jan 19, 2012 at 12:49 PM, Stephen Warren swar...@nvidia.com wrote:
On 01/12/2012 12:00 PM, Simon Glass wrote:
Some devices can deal with
Hi Wolfgang,
On 01/19/2012 03:26 AM, Dirk Behme wrote:
Dear Wolfgang,
On 19.01.2012 10:58, Wolfgang Grandegger wrote:
Where can I find the SPI_to_SD_loader.bin image?
Unfortunately, at the moment you have to ask your Freescale contact for this. We
ping Freescale since weeks for this. Last
On 01/13/2012 04:10 PM, Simon Glass wrote:
Add a NAND controller along with a bindings file for review.
A few questions to start with:
diff --git a/doc/device-tree-bindings/nand/nvidia-nand.txt
b/doc/device-tree-bindings/nand/nvidia-nand.txt
+NAND Flash
+--
+
+(there isn't yet a
On 01/19/2012 06:40 PM, Tom Warren wrote:
Folks,
Simon and Stephen have been talking offline about Simon's fdt patches, to wit:
U-Boot-v3-1-2-fdt-Add-fdtdec_find_aliases-to-deal-with-alias-nodes.patch
U-Boot-v3-2-2-fdt-Add-tests-for-fdtdec.patch
On Wed, Jan 18, 2012 at 2:07 PM, Marek Vasut marek.va...@gmail.com wrote:
Fabio, can you please test this and 2/3 ?
Yes, will test them soon.
Regards,
Fabio Estevam
___
U-Boot mailing list
U-Boot@lists.denx.de
On Wed, Jan 18, 2012 at 6:09 AM, Eric Nelson
eric.nel...@boundarydevices.com wrote:
Signed-off-by: Eric Nelson eric.nel...@boundarydevices.com
---
include/configs/mx6qsabrelite.h | 12 +++-
1 files changed, 11 insertions(+), 1 deletions(-)
diff --git
On Wed, Jan 18, 2012 at 2:07 PM, Marek Vasut marek.va...@gmail.com wrote:
Fabio, can you please test this and 2/3 ?
Yes, will test them soon.
Regards,
Fabio Estevam
Thanks a lot!
___
U-Boot mailing list
U-Boot@lists.denx.de
Hello,
Is it possible to use i2c output in a u-boot script something like
if test i2c md.0 68 f = 0x80;then; echo Watchdog Triggered;else; echo
Power Cycle; fi
the only problem is that i2c command outputs something like= i2c md 68 f
000f: 00 .
and comparing the entire string is not working.
hi, Lei, Scott:
I think this is correct,
do you have some comments ?
thanks!
BR.
Kassey
2012/1/18 Liu, Wentao wentao@intel.com:
In function nand_write_skip_bad(),for YAFFS filesystem part,
write_oob() will return 0 when success, so when rval equals 0,
it should continue to
Hello Timur,
Timur Tabi wrote:
Wolfgang Denk wrote:
As mentioned before, this is what we currently have as device model
in U-Boot - not only I2C: we have the same current device concept
with IDE, USB, ...
The difference is that I2C operations are typically done internally by
other code,
Hello Patil,
Patil, Rachna schrieb:
Existing OMAP I2C driver does not support address
length greater than one. Hence this patch is to
add support for 2 byte address read/write.
Signed-off-by: Philip, Avinash avinashphi...@ti.com
Signed-off-by: Hebbar, Gururaja gururaja.heb...@ti.com
On 20.01.2012 04:27, Jason Hui wrote:
On Wed, Jan 18, 2012 at 6:09 AM, Eric Nelson
eric.nel...@boundarydevices.com wrote:
Signed-off-by: Eric Nelson eric.nel...@boundarydevices.com
---
include/configs/mx6qsabrelite.h | 12 +++-
1 files changed, 11 insertions(+), 1 deletions(-)
diff
On Thu, Jan 19, 2012 at 12:54 PM, Aneesh V ane...@ti.com wrote:
On Thursday 19 January 2012 05:00 PM, Christian Riesch wrote:
On Thu, Jan 19, 2012 at 11:17 AM, Aneesh Vane...@ti.com wrote:
On Thursday 19 January 2012 12:23 PM, Sughosh Ganu wrote:
Tried a few things on my end.
* Read the
On Fri, Jan 20, 2012 at 3:06 PM, Dirk Behme dirk.be...@de.bosch.com wrote:
On 20.01.2012 04:27, Jason Hui wrote:
On Wed, Jan 18, 2012 at 6:09 AM, Eric Nelson
eric.nel...@boundarydevices.com wrote:
Signed-off-by: Eric Nelson eric.nel...@boundarydevices.com
---
56 matches
Mail list logo
