On 20/01/2012 08:48, Jason Hui wrote:
I'm wondering how the CONFIG_ENV_SPI_CS could be 0x5300? Vague?
Then the left open question is only above one.
The SPI driver can take as chip select the controller's chip selects as
well as an external GPIO. The LSB byte has the value of the internal
Sughosh,
On Friday 20 January 2012 12:58 PM, Christian Riesch wrote:
On Thu, Jan 19, 2012 at 12:54 PM, Aneesh Vane...@ti.com wrote:
On Thursday 19 January 2012 05:00 PM, Christian Riesch wrote:
On Thu, Jan 19, 2012 at 11:17 AM, Aneesh Vane...@ti.comwrote:
On Thursday 19 January 2012
hi,
I am manish. I recently started working with beagleboard xm . I have a basic
doubt..
The sd card is divided into fat32 and ext3 partition. All the neccesary
files such as MLO, uboot.bin,uimage are put in the fat32 folder.I belive
this is done so that the uboot will pick up uimage from this
Hi Remy,
I am in the process of adding USB CDC-ECM support for the platform based on
OAMP3.
Can you give the pointers to start my porting
1. Linux files you modified to port gadget driver to U-boot
2. Under which U-Boot directory you copied these files
2. Linux files you
modified to
ICMP (ping) was reimplementing IP header code... it now shares code.
Signed-off-by: Joe Hershberger joe.hershber...@ni.com
Cc: Joe Hershberger joe.hershber...@gmail.com
Cc: Wolfgang Denk w...@denx.de
---
include/net.h |4 +++-
net/bootp.c |6 +++---
net/net.c | 47
A new non-static function NetInit() will initialize buffers and read
from the env
Only update from the env on each entry to NetLoop()
Check when attempting to send a packet that the buffers were initialized
Signed-off-by: Joe Hershberger joe.hershber...@ni.com
Cc: Joe Hershberger
MAC-seeded rand() will be needed by link-local as well, so give it
an interface
Signed-off-by: Joe Hershberger joe.hershber...@ni.com
Cc: Joe Hershberger joe.hershber...@gmail.com
Cc: Wolfgang Denk w...@denx.de
---
net/Makefile |1 +
net/bootp.c| 69
This is useful if you want to look for a DHCP server, but try some
other settings if not available
Signed-off-by: Joe Hershberger joe.hershber...@ni.com
Cc: Joe Hershberger joe.hershber...@gmail.com
Cc: Wolfgang Denk w...@denx.de
---
README |7 +++
net/bootp.c |5 +
2
Clears up checkpatch.pl complaint about extern in c file
Completes the effort started by Ben Warren in 2008 to generalize
eth init
Signed-off-by: Joe Hershberger joe.hershber...@ni.com
Cc: Joe Hershberger joe.hershber...@gmail.com
Cc: Wolfgang Denk w...@denx.de
---
Signed-off-by: Joe Hershberger joe.hershber...@ni.com
Cc: Joe Hershberger joe.hershber...@gmail.com
Cc: Wolfgang Denk w...@denx.de
---
net/net.c | 44 +---
1 files changed, 25 insertions(+), 19 deletions(-)
diff --git a/net/net.c b/net/net.c
index
There is no reason to use compiler magic to fix this
Actually move the definition inside the #ifdef
Signed-off-by: Joe Hershberger joe.hershber...@ni.com
Cc: Joe Hershberger joe.hershber...@gmail.com
Cc: Wolfgang Denk w...@denx.de
---
net/bootp.c |7 +++
1 files changed, 3 insertions(+),
Use this entry-point consistently across the net/ code
Signed-off-by: Joe Hershberger joe.hershber...@ni.com
Cc: Joe Hershberger joe.hershber...@gmail.com
Cc: Wolfgang Denk w...@denx.de
---
net/arp.c |6 +++---
net/cdp.c |2 +-
net/net.c |2 +-
net/ping.c |3 +--
4 files
NetUpdateEther() will preserve the original Ethernet packet header
and simply replace the src and dest MACs and the protocol
Signed-off-by: Joe Hershberger joe.hershber...@ni.com
Cc: Joe Hershberger joe.hershber...@gmail.com
Cc: Wolfgang Denk w...@denx.de
---
include/net.h |1 +
net/arp.c
Code based on networking/zcip.c in busybox
- commit 8531d76a15890c2c535908ce888b2e2aed35b172
Signed-off-by: Joe Hershberger joe.hershber...@ni.com
Cc: Joe Hershberger joe.hershber...@gmail.com
Cc: Wolfgang Denk w...@denx.de
---
README | 15 +++-
common/cmd_net.c | 30 +
Signed-off-by: Joe Hershberger joe.hershber...@ni.com
Cc: Joe Hershberger joe.hershber...@gmail.com
Cc: Wolfgang Denk w...@denx.de
---
net/arp.c | 13 -
net/ping.c |7 ---
net/rarp.c |6 --
3 files changed, 16 insertions(+), 10 deletions(-)
diff --git a/net/arp.c
Before this patch, bootp would not overwrite the value, but the
value was still clobbered in the env
Signed-off-by: Joe Hershberger joe.hershber...@ni.com
Cc: Joe Hershberger joe.hershber...@gmail.com
Cc: Wolfgang Denk w...@denx.de
---
common/cmd_net.c |4 ++--
1 files changed, 2
Don't force ARP clients to return the MAC address if they don't
care about it (such as ping)
Signed-off-by: Joe Hershberger joe.hershber...@ni.com
Cc: Joe Hershberger joe.hershber...@gmail.com
Cc: Wolfgang Denk w...@denx.de
---
net/arp.c |9 +
net/ping.c | 10 +++---
2
Signed-off-by: Joe Hershberger joe.hershber...@ni.com
Cc: Joe Hershberger joe.hershber...@gmail.com
Cc: Wolfgang Denk w...@denx.de
---
include/net.h |3 +-
net/Makefile |1 +
net/arp.c | 213 +
net/arp.h | 30
The mv_eth driver should not redefine the net function definition
Signed-off-by: Joe Hershberger joe.hershber...@ni.com
Cc: Joe Hershberger joe.hershber...@gmail.com
Cc: Wolfgang Denk w...@denx.de
---
board/Marvell/db64360/mv_eth.c |2 --
board/Marvell/db64460/mv_eth.c |2 --
Changes to NetState now go through an accessor function called
NetSetState()
Signed-off-by: Joe Hershberger joe.hershber...@ni.com
Cc: Joe Hershberger joe.hershber...@gmail.com
Cc: Wolfgang Denk w...@denx.de
---
drivers/net/netconsole.c |6 +++---
include/net.h| 13
Signed-off-by: Joe Hershberger joe.hershber...@ni.com
Cc: Joe Hershberger joe.hershber...@gmail.com
Cc: Wolfgang Denk w...@denx.de
---
include/configs/am3517_crane.h |2 +-
include/configs/am3517_evm.h |2 +-
include/configs/origen.h |2 +-
net/Makefile |
Signed-off-by: Joe Hershberger joe.hershber...@ni.com
Cc: Joe Hershberger joe.hershber...@gmail.com
Cc: Wolfgang Denk w...@denx.de
---
net/bootp.c | 26 ++
1 files changed, 14 insertions(+), 12 deletions(-)
diff --git a/net/bootp.c b/net/bootp.c
index 0c2af48..0d5f4cf
There is no need to call through the handler when we can handle
it inline
Signed-off-by: Joe Hershberger joe.hershber...@ni.com
Cc: Joe Hershberger joe.hershber...@gmail.com
Cc: Wolfgang Denk w...@denx.de
---
net/ping.c | 19 ++-
1 files changed, 2 insertions(+), 17
Cisco's arp-proxy feature fails to ignore the link-local address range
This means that a link-local device on a network with this Cisco
equipment will reply to ARP requests for our device (in addition
to our reply)
If we happen to reply first, the requester's ARP table will be
populated
Only call the handlers if one was registered... don't require
protocols to register a handler (eliminating dummies)
NetConsole now uses the ARP handler when waiting on arp (instead of
needing a #define hack in arp.c)
Clear handlers at the end of net loop
Signed-off-by: Joe Hershberger
Use the NetArpTxPacket for the ARP packet, not to hold what used to be
in NetTxPacket
This saves a copy and makes the code easier to understand
Generalize the formation of the ARP packet
Signed-off-by: Joe Hershberger joe.hershber...@ni.com
Cc: Joe Hershberger joe.hershber...@gmail.com
Cc:
Un-typedef IP_t, Ethernet_t, VLAN_Ethernet_t, ARP_t, ICMP_t
Rename IP header related things to IP_UDP
The existing definition of IP_t includes UDP header, so name it to
accurately describe the structure
Signed-off-by: Joe Hershberger joe.hershber...@ni.com
Cc: Joe Hershberger
Link-local support allows the bootloader to get a usable network address
regardless of network environment. Given that bootloaders may not always
have access to a DHCP server, this functionality makes accessing it in
those environments easier. It is also referred to as zero-configuration IP.
Rename parameter len to payload_len in NetSendUDPPacket: this name
more explicitly claims that it does not include the header size
Rename CDPHandler to CDPReceive: this is not called as a handler,
so don't name it that way
Rename OPT_SIZE to OPT_FIELD_SIZE: clearer constant name and also
Signed-off-by: Joe Hershberger joe.hershber...@ni.com
Cc: Joe Hershberger joe.hershber...@gmail.com
Cc: Wolfgang Denk w...@denx.de
---
drivers/net/netconsole.c |6 ++
net/arp.c| 12
net/link_local.c | 31 +++
net/net.c
Signed-off-by: Joe Hershberger joe.hershber...@ni.com
Cc: Joe Hershberger joe.hershber...@gmail.com
Cc: Wolfgang Denk w...@denx.de
---
net/net.c | 25 +
net/rarp.c | 38 +++---
net/rarp.h |1 +
3 files changed, 29 insertions(+), 35
Signed-off-by: Joe Hershberger joe.hershber...@ni.com
Cc: Joe Hershberger joe.hershber...@gmail.com
Cc: Wolfgang Denk w...@denx.de
---
arch/powerpc/cpu/mpc8xx/fec.c |2 +-
include/net.h |9 +-
net/Makefile |1 +
net/cdp.c | 380
Hi Eric,
On 01/20/2012 01:56 AM, Eric Nelson wrote:
Hi Wolfgang,
On 01/19/2012 03:26 AM, Dirk Behme wrote:
Dear Wolfgang,
On 19.01.2012 10:58, Wolfgang Grandegger wrote:
Where can I find the SPI_to_SD_loader.bin image?
Unfortunately, at the moment you have to ask your Freescale contact
Hi Aneesh,
On Fri, Jan 20, 2012 at 9:52 AM, Aneesh V ane...@ti.com wrote:
Sughosh,
[...]
Can you send the value of SCR you found at SPL entry? This will clarify
what's enabled and what's not.
I would like to try that on my board as well for comparison. Could you
please tell me how this
so sorry to you,
i think it's difference between DISABLE and Flush.
be careful.
On Wed, Jan 11, 2012 at 2:12 AM, Sughosh Ganu urwithsugh...@gmail.comwrote:
The current implementation invalidates the cache instead of flushing
it. This causes problems on platforms where the spl/u-boot is
Hello,
I want to stop autoboot and use mtest to check if my ram is alright, but
0x07FD2C00 forward freezes, and 0x0902 also freezes, mtest, when using
it. My ramsize is 0x0800.
Does u-boot uses any parts of ram by itself, I mean, is there any known
spots where I can't test because it
Hi,
On Fri, 20 Jan 2012 08:07:41 -0200
Érico Porto ericoporto2...@gmail.com wrote:
Hello,
I want to stop autoboot and use mtest to check if my ram is alright, but
0x07FD2C00 forward freezes, and 0x0902 also freezes, mtest, when using
it. My ramsize is 0x0800.
Does u-boot uses
Now I understood, LTIB is giving me an older u-boot version - 1.1.6 and not
2011.12. Will try to update it...
Érico V. Porto
On Fri, Jan 20, 2012 at 8:38 AM, Anatolij Gustschin ag...@denx.de wrote:
Hi,
On Fri, 20 Jan 2012 08:07:41 -0200
Érico Porto ericoporto2...@gmail.com wrote:
Hello,
files changed, 298 insertions(+), 172 deletions(-)
Sorry, your patch did not apply, nor on u-boot.git master nor on
u-boot-ti-git master:
[hs@pollux u-boot-i2c]$ git am 20120120/0001.patch
Applying: ARM: I2C: I2C Multi byte address support
error: patch failed: drivers/i2c/omap24xx_i2c.c:29
On Fri, Jan 20, 2012 at 12:28 AM, Christian Riesch
christian.rie...@omicron.at wrote:
On Thu, Jan 19, 2012 at 12:54 PM, Aneesh V ane...@ti.com wrote:
On Thursday 19 January 2012 05:00 PM, Christian Riesch wrote:
On Thu, Jan 19, 2012 at 11:17 AM, Aneesh Vane...@ti.com wrote:
On Thursday 19
On Friday 20 January 2012 02:51 PM, Christian Riesch wrote:
Hi Aneesh,
On Fri, Jan 20, 2012 at 9:52 AM, Aneesh Vane...@ti.com wrote:
Sughosh,
[...]
Can you send the value of SCR you found at SPL entry? This will clarify
what's enabled and what's not.
I would like to try that on my board
Hi Aneesh,
On Fri, Jan 20, 2012 at 1:13 PM, Aneesh V ane...@ti.com wrote:
On Friday 20 January 2012 02:51 PM, Christian Riesch wrote:
On Fri, Jan 20, 2012 at 9:52 AM, Aneesh Vane...@ti.com wrote:
Sughosh,
[...]
Can you send the value of SCR you found at SPL entry? This will clarify
Hi Christian,
On Friday 20 January 2012 06:18 PM, Christian Riesch wrote:
Hi Aneesh,
On Fri, Jan 20, 2012 at 1:13 PM, Aneesh Vane...@ti.com wrote:
On Friday 20 January 2012 02:51 PM, Christian Riesch wrote:
On Fri, Jan 20, 2012 at 9:52 AM, Aneesh Vane...@ti.comwrote:
Sughosh,
[...]
1) OOB area should be updated irrespective of NAND page size. Earlier it was
updated only for 512byte NAND page.
2) During OOB update fbcr should be equal to OOB size.
Signed-off-by: Poonam Aggrwal poonam.aggr...@freescale.com
Signed-off-by: Prabhakar Kushwaha prabha...@freescale.com
---
Based
Freescale IFC NAND Machine calculates ECC on 512byte sector and same is used in
fsl_ifc_run_command() during ECC status verification. Also this sector is passed
to is_blank() for blank checking. It is wrong at first place because
is_blank()'s implementation checks for Page size and OOB area size.
Hi, I am new to U-Boot, how do I get started?
--
*Thanks Regards**
*
*periyasamy.R*
___
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
I am trying to emulate a new MIPS64R2 based target in QEMU, which actually
uses U-Boot as a bootloader. Can I skip U-Boot and and directly load the
kernel as it is done in Matla Mips 64 board??
___
U-Boot mailing list
U-Boot@lists.denx.de
On 01/19/2012 08:27 PM, Jason Hui wrote:
On Wed, Jan 18, 2012 at 6:09 AM, Eric Nelson
eric.nel...@boundarydevices.com wrote:
Signed-off-by: Eric Nelsoneric.nel...@boundarydevices.com
---
include/configs/mx6qsabrelite.h | 12 +++-
1 files changed, 11 insertions(+), 1 deletions(-)
On 01/20/2012 01:47 AM, Stefano Babic wrote:
On 20/01/2012 08:48, Jason Hui wrote:
I'm wondering how the CONFIG_ENV_SPI_CS could be 0x5300? Vague?
Then the left open question is only above one.
The SPI driver can take as chip select the controller's chip selects as
well as an external
On 01/20/2012 02:15 AM, Wolfgang Grandegger wrote:
On 01/20/2012 01:56 AM, Eric Nelson wrote:
Yes. If you program u-boot.imx to offset 0x400, it will boot.
I just did so as shown below.
I started by placing SW1 in the 01 position (boot to USB), and
used imx_usb to dowload u-boot.imx:
Hi Joe,
On Thu, Jan 19, 2012 at 4:53 PM, Joe Hershberger joe.hershber...@ni.com wrote:
The mv_eth driver should not redefine the net function definition
Signed-off-by: Joe Hershberger joe.hershber...@ni.com
Cc: Joe Hershberger joe.hershber...@gmail.com
Cc: Wolfgang Denk w...@denx.de
---
Hi Joe,
On Thu, Jan 19, 2012 at 4:53 PM, Joe Hershberger joe.hershber...@ni.com wrote:
Signed-off-by: Joe Hershberger joe.hershber...@ni.com
Cc: Joe Hershberger joe.hershber...@gmail.com
Cc: Wolfgang Denk w...@denx.de
---
common/main.c | 1 -
drivers/net/netconsole.c | 122
On 01/13/2012 04:10 PM, Simon Glass wrote:
From: Jim Lin ji...@nvidia.com
A device tree is used to configure the NAND, including memory
timings and block/pages sizes.
If this node is not present or is disabled, then NAND will not
be initialized.
Signed-off-by: Simon Glass
Okay, got 2011.12 working here.
Same problem, my system stalls when I try using mtest on low position of
the memory, but now I have the relocaddr var to tell me what is the
superior memory limit.
( I can't paste any output here because the list gives me a BASE ENCODE64
not allowed error... )
On Tuesday 10 January 2012 19:45:45 Simon Glass wrote:
This adds support for a controlling fdt, mirroring the ARM implementation.
OK, but what's the point if we aren't doing FDT's ?
+#ifdef CONFIG_OF_EMBED
+ /* Get a pointer to the FDT */
+ gd-fdt_blob = _binary_dt_dtb_start;
+#elif
On Tuesday 10 January 2012 19:45:46 Simon Glass wrote:
+#define CONFIG_LMB
do we need this ?
-mike
signature.asc
Description: This is a digitally signed message part.
___
U-Boot mailing list
U-Boot@lists.denx.de
On Tuesday 10 January 2012 19:45:47 Simon Glass wrote:
This provides a way of simulating GPIOs by setting values which are seen
by the normal gpio_get/set_value() calls.
seems to be a desync in types ... all gpio fields should be unsigned and
not int
--- /dev/null
+++
On Tuesday 10 January 2012 19:45:48 Simon Glass wrote:
--- a/include/configs/sandbox.h
+++ b/include/configs/sandbox.h
+#define CONFIG_SANDBOX_GPIO_COUNT224
do we really need 224 examples GPIOs ? can't we do with like 20 ?
-mike
signature.asc
Description: This is a digitally signed
On Tuesday 10 January 2012 19:45:50 Simon Glass wrote:
In order to pass command line arguments to sandbox we need to be able
to act on them. So take control back at the end of board_init_r() from
where we can call the main loop or do something else.
does this need to be done this early ?
On Tuesday 10 January 2012 19:45:52 Simon Glass wrote:
--- a/arch/sandbox/cpu/os.c
+++ b/arch/sandbox/cpu/os.c
+static struct option long_options[] = {
constify
+void os_usage(int err)
+{
+ if (err 0)
+ fprintf(stderr, Try `--help' for more information.\n);
+
Signed-off-by: Mike Frysinger vap...@gentoo.org
---
include/os.h |5 +
1 files changed, 5 insertions(+), 0 deletions(-)
diff --git a/include/os.h b/include/os.h
index f3af4f0..c17a8a5 100644
--- a/include/os.h
+++ b/include/os.h
@@ -25,6 +25,9 @@
* This provides access to useful OS
Signed-off-by: Mike Frysinger vap...@gentoo.org
---
common/cmd_mem.c | 12 +++-
1 files changed, 3 insertions(+), 9 deletions(-)
diff --git a/common/cmd_mem.c b/common/cmd_mem.c
index 9ad932c..5121b22 100644
--- a/common/cmd_mem.c
+++ b/common/cmd_mem.c
@@ -35,12 +35,6 @@
#include
Not only does the source code get simpler, but it also shrinks the
compiled object code too.
While we're here, tweak the summary message to avoid the plural
issue. It isn't that big of a deal, and it's currently wrong
anyways in the single (1 byte) case:
Total of 1 byte were the same
Simplify the code slightly by using a for() loop since this is
basically what we're already doing -- incrementing ngood to
the value in count.
Signed-off-by: Mike Frysinger vap...@gentoo.org
---
common/cmd_mem.c |7 ++-
1 files changed, 2 insertions(+), 5 deletions(-)
diff --git
Hi Simon,
On Fri, Jan 20, 2012 at 10:22 AM, Simon Glass s...@chromium.org wrote:
Hi Joe,
On Thu, Jan 19, 2012 at 4:53 PM, Joe Hershberger joe.hershber...@ni.com
wrote:
The mv_eth driver should not redefine the net function definition
Signed-off-by: Joe Hershberger joe.hershber...@ni.com
Hi Simon,
On Fri, Jan 20, 2012 at 10:30 AM, Simon Glass s...@chromium.org wrote:
Hi Joe,
On Thu, Jan 19, 2012 at 4:53 PM, Joe Hershberger joe.hershber...@ni.com
wrote:
Signed-off-by: Joe Hershberger joe.hershber...@ni.com
Cc: Joe Hershberger joe.hershber...@gmail.com
Cc: Wolfgang Denk
I've partially solved the ctrl+c situatin inserting more check for it into
the code. But this isn't really what I was hoping...
Any known alternatives? Thanks.
Érico V. Porto
On Fri, Jan 20, 2012 at 4:22 PM, Érico Porto ericoporto2...@gmail.comwrote:
Okay, got 2011.12 working here.
Same
On 01/20/2012 12:17 AM, Kassey Lee wrote:
hi, Lei, Scott:
I think this is correct,
do you have some comments ?
Looks right.
-Scott
___
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
Hi,
Can new UDCs be written for CONFIG_USB_DEVICE or is that deprecated in
favour of CONFIG_USB_GADGET? If that is the case and CONFIG_USB_DEVICE is
deprecated, if I want to get USBTTY enabled for a currently unsupported UDC
I would need to port USBTTY to CONFIG_USB_GADGET; is there interest
Introduce source_commands() which incorporates run_command2() and parts of
source().
All command script are now treated the same, that is newlines are accepted
within a command script and variable.
Signed-off-by: Michael Walle mich...@walle.cc
Cc: Wolfgang Denk w...@denx.de
Cc: Mike Frysinger
On 01/13/2012 05:10 PM, Simon Glass wrote:
+/* Information about an attached NAND chip */
+struct fdt_nand {
+ struct nand_ctlr *reg;
+ int enabled;/* 1 to enable, 0 to disable */
+ struct fdt_gpio_state wp_gpio; /* write-protect GPIO */
+ int width;
On 01/16/2012 11:11 PM, Simon Glass wrote:
Add funcmux support for the default keyboard mapping.
Signed-off-by: Simon Glass s...@chromium.org
diff --git a/arch/arm/cpu/armv7/tegra2/funcmux.c
b/arch/arm/cpu/armv7/tegra2/funcmux.c
+ case PERIPH_ID_KBC:
+ if (config ==
On 01/16/2012 11:11 PM, Simon Glass wrote:
From: Anton Staff robot...@chromium.org
The Tegra keyboard controller provides a simple interface to a matrix
keyboard.
diff --git a/arch/arm/dts/tegra20.dtsi b/arch/arm/dts/tegra20.dtsi
+ kbc@7000e200 {
+ compatible =
Am Freitag 20 Januar 2012, 23:46:51 schrieb Michael Walle:
Introduce source_commands() which incorporates run_command2() and parts of
source().
All command script are now treated the same, that is newlines are accepted
within a command script and variable.
Signed-off-by: Michael Walle
On 01/16/2012 11:11 PM, Simon Glass wrote:
From: Rakesh Iyer ri...@nvidia.com
Add support for internal matrix keyboard controller for Nvidia Tegra
platforms.
This driver uses the fdt decode function to obtain its key codes.
...
+static uchar *create_keymap(u32 *data, int len, int
On Fri, Jan 20, 2012 at 11:07 AM, Mike Frysinger vap...@gentoo.org wrote:
Signed-off-by: Mike Frysinger vap...@gentoo.org
Acked-by: Simon Glass s...@chromium.org
---
include/os.h | 5 +
1 files changed, 5 insertions(+), 0 deletions(-)
diff --git a/include/os.h b/include/os.h
index
Hi Michael,
On Fri, Jan 20, 2012 at 3:37 PM, Michael Walle mich...@walle.cc wrote:
Am Freitag 20 Januar 2012, 23:46:51 schrieb Michael Walle:
Introduce source_commands() which incorporates run_command2() and parts of
source().
All command script are now treated the same, that is newlines are
Hi,
On Thu, Jan 19, 2012 at 9:17 AM, Stephen Warren swar...@nvidia.com wrote:
Olof Johansson wrote at Wednesday, January 18, 2012 10:32 PM:
On Wed, Jan 18, 2012 at 05:16:52PM -0700, Stephen Warren wrote:
diff --git a/Documentation/devicetree/bindings/clock/nvidia,tegra20-car.txt
+* NVIDIA
78 matches
Mail list logo
