Dear Simon Glass,
In message capnjgz3s2+w0ppyuh8c4jqgsemsbzwwdeqbquwkz_bf1o0o...@mail.gmail.com
you wrote:
$(DT_BIN): $(TOPDIR)/board/$(VENDOR)/dts/$(DEVICE_TREE).dts
- cat $ | $(CPP) -P $(DTS_CPPFLAGS) - $@.tmp
- $(DTC) -R 4 -p 0x1000 -O dtb -o ${DT_BIN} $@.tmp
- rm
On 23.01.2012 08:31, Simon Glass wrote:
Hi,
On Thu, Jan 19, 2012 at 12:56 AM, Dirk Behme dirk.be...@de.bosch.com wrote:
From: Eric Miao eric.m...@linaro.org
Ignore the return value of eth_getenv_enetaddr_by_index(), and if it
fails, fall back to use dev-enetaddr, which could be filled up by
This patchset add support for Samsung's SMDK5250 board based on
EXYNOS5250 based SoC. It also adds support for MMC SPL booting.
The porting is done by Samsung engineers at HQ in System LSI Team.
I am contributing in upstreaming the code for the board.
Based upon discussions following patches are
CONFIG_SYS_CLK_FREQ_C210 macro giving notion of S5PC2XX (Exynos4)
architecture. Replace CONFIG_SYS_CLK_FREQ_C210 with CONFIG_SYS_CLK_FREQ
to make it generic for exynos architecture.
Signed-off-by: Chander Kashyap chander.kash...@linaro.org
---
Changes for v2:
- None
Changes for v3:
Samsung's ARM Cortex-A15 based SoCs are known as Exynos5 series of
SoCs. This patch adds the support for Exynos5.
Signed-off-by: Chander Kashyap chander.kash...@linaro.org
---
Changes for v2:
- This patch was part of EXYNOS: Add SMDK5250 board support
- Now it is seprated as SoC
SMDK5250 board is based on Samsungs EXYNOS5250 SoC.
Signed-off-by: Chander Kashyap chander.kash...@linaro.org
---
Changes for v2:
- This patch is bifurcated into borad support and SoC support
- Fixed typo: s/EEYNOS/EXYNOS
- Squashed patch SMDK5250: enable device tree
This patch adds support for MMC SPL booting.
Signed-off-by: Chander Kashyap chander.kash...@linaro.org
---
Changes for v2:
- None
Changes for v3:
- None
Changes for v4:
None
board/samsung/smdk5250/Makefile | 16
board/samsung/smdk5250/mmc_boot.c
Existing OMAP I2C driver does not support address
length greater than one. Hence this patch is to
add support for 2 byte address read/write.
Signed-off-by: Philip, Avinash avinashphi...@ti.com
Signed-off-by: Hebbar, Gururaja gururaja.heb...@ti.com
Signed-off-by: Patil, Rachna rac...@ti.com
---
1. Compliant with Philips I2C specification version 2.1
2. Supports upto 100Kbps in standard mode
Signed-off-by: Chandan Nath chandan.n...@ti.com
Signed-off-by: Patil, Rachna rac...@ti.com
---
Changes for v3:
rebased, patches applied on top of master branch
drivers/i2c/omap24xx_i2c.c | 20
Add i2c driver board hookup for AM335X EVM
Signed-off-by: Chandan Nath chandan.n...@ti.com
Signed-off-by: Patil, Rachna rac...@ti.com
---
Changes for v3:
rebased, patches applied on top of master branch
arch/arm/cpu/armv7/am33xx/clock.c |5 ++
isn't U-boot's address given by the relocadrr variable? If it is so, it is
already at the end of ram and I'm giving a smaller end address to the ram -
I'm getting relocaddr 0x07fcd000 and using this minus 0x01000 as ending
position...
Érico V. Porto
On Sat, Jan 21, 2012 at 2:21 PM, amruth
Dear Wolfgang,
On 05.01.2012 16:59, Wolfgang Denk wrote:
Dear Grant Erickson,
In message 1324580395-27004-1-git-send-email-maratho...@gmail.com you wrote:
This patch allows the U-Boot user space companion utility, fw_setenv,
to overwrite the 'ethaddr' key/value pair if the current value is
Hello,
i recently stumbled upon a compile-error which appears after trying to
compile via
/./MAKEALL --arch arm --cpu pxa --vendor toradex/
, it appears U-Boot uses software-FP whereas the native XScale-libs use
hardware-FP, see for yourself please :
/[dmack@Blizzard ~/workspace/u-boot]$
Dear =?ISO-8859-1?Q?=C9rico_Porto?=,
In message cag1ktjegl3m69knr9tokhqgzrksnrzzjqfch9fnvm5g+6wa...@mail.gmail.com
you wrote:
isn't U-boot's address given by the relocadrr variable? If it is so, it is
already at the end of ram and I'm giving a smaller end address to the ram -
I'm getting
Dear Daniel Mack,
In message 4f1d60e8.4030...@lertes.de you wrote:
i recently stumbled upon a compile-error which appears after trying to
compile via
/./MAKEALL --arch arm --cpu pxa --vendor toradex/
, it appears U-Boot uses software-FP whereas the native XScale-libs use
hardware-FP,
Ok, this makes sense, but I think you mean:
memory start at 0x
mtest {
start address: right after (malloc area+global data + stack)
end address: relocaddr
}
memory end at 0x0800
...
Érico V. Porto
On Mon, Jan 23, 2012 at 12:23 PM, Wolfgang Denk w...@denx.de wrote:
Dear
Dear =?ISO-8859-1?Q?=C9rico_Porto?=,
Please stop top posting / full quoting.
In message CAG1KTJebU-QhhH2=ibfojsjjvaynh4hrfuzobnwz20uzq-5...@mail.gmail.com
you wrote:
Ok, this makes sense, but I think you mean:
No, I mean what I mean, not what you think I mean.
memory start at 0x
Oh, found the Memory Management section, thanks! And it also explains that
stuff should be written after 0x 2000 because of the exception vector -
actually, I thinks this is a bit bigger here in my system, but now makes
sense why I was also getting crashes at the beginning of the memory!
On 1/23/12, Marek Vasut marek.va...@gmail.com wrote:
Just put it amongst the other frequencies displayed by the clock command.
What about this?
--- a/arch/arm/cpu/arm926ejs/mx28/mx28.c
+++ b/arch/arm/cpu/arm926ejs/mx28/mx28.c
@@ -170,6 +170,7 @@ int arch_cpu_init(void)
int print_cpuinfo(void)
Albert,
-Original Message-
From: Albert ARIBAUD [mailto:albert.u.b...@aribaud.net]
Sent: Saturday, January 21, 2012 4:07 AM
To: Tom Warren
Cc: Wolfgang Denk; u-boot@lists.denx.de; Stephen Warren; Simon Glass
Subject: Re: pull request: u-boot-tegra/master
Hi Tom,
Le 19/01/2012
On 23/01/2012 16:52, Fabio Estevam wrote:
On 1/23/12, Marek Vasut marek.va...@gmail.com wrote:
Just put it amongst the other frequencies displayed by the clock command.
What about this?
--- a/arch/arm/cpu/arm926ejs/mx28/mx28.c
+++ b/arch/arm/cpu/arm926ejs/mx28/mx28.c
@@ -170,6 +170,7
Hi Dirk,
On Jan 23, 2012 12:30 AM, Dirk Behme dirk.be...@de.bosch.com wrote:
On 23.01.2012 08:31, Simon Glass wrote:
Hi,
On Thu, Jan 19, 2012 at 12:56 AM, Dirk Behme dirk.be...@de.bosch.com
wrote:
From: Eric Miao eric.m...@linaro.org
Ignore the return value of
Olof Johansson wrote at Saturday, January 21, 2012 12:32 AM:
On Thu, Jan 19, 2012 at 9:17 AM, Stephen Warren swar...@nvidia.com wrote:
Olof Johansson wrote at Wednesday, January 18, 2012 10:32 PM:
On Wed, Jan 18, 2012 at 05:16:52PM -0700, Stephen Warren wrote:
diff --git
Simon Glass wrote at Sunday, January 22, 2012 11:03 AM:
On Wed, Jan 18, 2012 at 4:16 PM, Stephen Warren swar...@nvidia.com wrote:
Document a binding for the Tegra20 CAR (Clock And Reset) Controller,
add it to tegra20.dtsi, and configure it for the board in tegra-
seaboard.dts.
...
A
Move (E)CSPI register declarations into the imx-regs.h files for each supported
CPU
Introduce two new macros to control conditional setup
MXC_CSPI - Used for processors with the Configurable Serial Peripheral
Interface (MX3x)
MXC_ECSPI - For processors with Enhanced Configurable...
Signed-off-by: Eric Nelson eric.nel...@boundarydevices.com
Acked-by: Dirk Behme dirk.be...@de.bosch.com
---
common/cmd_sf.c | 34 +++---
1 files changed, 23 insertions(+), 11 deletions(-)
diff --git a/common/cmd_sf.c b/common/cmd_sf.c
index 7225656..4b32171 100644
Signed-off-by: Eric Nelson eric.nel...@boundarydevices.com
Acked-by: Dirk Behme dirk.be...@de.bosch.com
---
board/freescale/mx6qsabrelite/imximage.cfg|2 +-
board/freescale/mx6qsabrelite/mx6qsabrelite.c | 25 +
include/configs/mx6qsabrelite.h |
Signed-off-by: Eric Nelson eric.nel...@boundarydevices.com
Acked-by: Dirk Behme dirk.be...@de.bosch.com
---
include/configs/mx6qsabrelite.h |1 +
1 files changed, 1 insertions(+), 0 deletions(-)
diff --git a/include/configs/mx6qsabrelite.h b/include/configs/mx6qsabrelite.h
index
The default settings store the persistent environment on SD card
and not serial flash (SPI NOR).
To use SPI NOR to save the environment instead of SD card, edit
include/configs/mx6qsabrelite.h and
- undefine CONFIG_ENV_IS_IN_MMC
- define CONFIG_ENV_IS_IN_SPI_FLASH
The SPI driver can take as
Signed-off-by: Eric Nelson eric.nel...@boundarydevices.com
Acked-by: Dirk Behme dirk.be...@de.bosch.com
---
arch/arm/include/asm/arch-mx6/imx-regs.h | 44 ++
1 files changed, 44 insertions(+), 0 deletions(-)
diff --git a/arch/arm/include/asm/arch-mx6/imx-regs.h
On 23/01/2012 16:52, Fabio Estevam wrote:
On 1/23/12, Marek Vasut marek.va...@gmail.com wrote:
Just put it amongst the other frequencies displayed by the clock
command.
What about this?
--- a/arch/arm/cpu/arm926ejs/mx28/mx28.c
+++ b/arch/arm/cpu/arm926ejs/mx28/mx28.c
@@ -170,6
Eric,
On 1/23/12, Eric Nelson eric.nel...@boundarydevices.com wrote:
Patch 4 modifies the 'sf' command to allow a default chip-select
to be specified by board headers as is done on efika et al. This allows
a bare 'sf' probe command:
U-Boot sf probe
instead of the more cumbersome usage
On Fri, Jan 20, 2012 at 11:32:04PM -0800, Olof Johansson wrote:
Hi,
On Thu, Jan 19, 2012 at 9:17 AM, Stephen Warren swar...@nvidia.com wrote:
Olof Johansson wrote at Wednesday, January 18, 2012 10:32 PM:
On Wed, Jan 18, 2012 at 05:16:52PM -0700, Stephen Warren wrote:
diff --git
On 01/21/2012 10:08 AM, Simon Glass wrote:
Hi Stephen,
On Wed, Jan 18, 2012 at 2:17 PM, Stephen Warren swar...@nvidia.com wrote:
On 01/11/2012 09:32 PM, Simon Glass wrote:
This adds some support into fdtdec for reading GPIO definitions from
the fdt. ...
...
diff --git a/include/fdtdec.h
On 01/22/2012 10:41 AM, Simon Glass wrote:
Hi Stephen,
On Thu, Jan 19, 2012 at 12:51 PM, Stephen Warren swar...@nvidia.com wrote:
On 01/12/2012 12:00 PM, Simon Glass wrote:
Add U-Boot's peripheral clock information to the Tegra20 device tree file.
diff --git a/arch/arm/dts/tegra20.dtsi
Hello!
(sorry for my english)
I need help!
Did you find solve with sd card for board with 9260/9g20?
I have board with at91sam9g20 and I have bug - gen_atmel_mci: CMDR 000d1052
(18) ARGR ec00 (SR: c0d7) XFER DTIP never unset, ignoring
u-boot 2011.12
All it works without mmc/sd.
My bug:
On 1/23/2012 6:18 AM, Stephen Warren wrote:
Olof Johansson wrote at Saturday, January 21, 2012 12:32 AM:
On Thu, Jan 19, 2012 at 9:17 AM, Stephen Warrenswar...@nvidia.com wrote:
Olof Johansson wrote at Wednesday, January 18, 2012 10:32 PM:
On Wed, Jan 18, 2012 at 05:16:52PM -0700, Stephen
On 01/23/2012 10:51 AM, Fabio Estevam wrote:
Patch 4 modifies the 'sf' command to allow a default chip-select
to be specified by board headers as is done on efika et al. This allows
a bare 'sf' probe command:
U-Boot sf probe
instead of the more cumbersome usage when a GPIO is
On 1/14/12, Matthias Fuchs matthias.fu...@esd.eu wrote:
The generic spi flash driver (drivers/mtd/spi/spi_flash.c) uses the
spi low level driver's spi_xfer() function with len=0 to deassert the
SPI flash' chip select. But the i.MX28 spi driver rejects this call
due to len=0.
This patch
On 1/14/12, Matthias Fuchs matthias.fu...@esd.eu wrote:
The generic spi flash driver (drivers/mtd/spi/spi_flash.c) uses the
spi low level driver's spi_xfer() function with len=0 to deassert the
SPI flash' chip select. But the i.MX28 spi driver rejects this call
due to len=0.
This
On 1/18/12, Matthias Fuchs matthias.fu...@esd.eu wrote:
This patch adds support for the MX28 internal RTC
and enables u-boot's date command.
Signed-off-by: Matthias Fuchs matthias.fu...@esd.eu
Tested-by: Fabio Estevam fabio.este...@freescale.com
___
Hi Matthias,
On 1/18/12, Matthias Fuchs matthias.fu...@esd.eu wrote:
Hi,
while playing around with the mx28evk and differnet bootmedia
I found it helpful to see the current bootmode without
running to the board and checking it's switches. Also
some other CPU (e.g. 440 PowerPCs) print some
On Monday 23 January 2012 07:23:09 Andreas Bießmann wrote:
On 05.01.2012 16:59, Wolfgang Denk wrote:
Grant Erickson wrote:
This patch allows the U-Boot user space companion utility, fw_setenv,
to overwrite the 'ethaddr' key/value pair if the current value is set
to a per-board-configured
Hi
The board that I am working on has multiple serial ports.
I am trying to use device trees to configure board resource of these
ports as well as the serial framework. So the driver doesnot know
apriori the number of uart ports on the board. But querries the device
tree for it.I am
On Wed, Jan 18, 2012 at 9:33 AM, Matthias Fuchs matthias.fu...@esd.eu wrote:
This patch adds SPI support for the MX28EVK. Support for
an optionally installed SPI flash is also added. An example
configuration for redundant envrionment from SPI flash is also
added but disabled by default.
This
Hi Mike,
On Sun, Jan 22, 2012 at 10:30 PM, Mike Frysinger vap...@gentoo.org wrote:
This adds a SPI framework for people to hook up simulated SPI clients.
Signed-off-by: Mike Frysinger vap...@gentoo.org
---
arch/sandbox/include/asm/spi.h | 33 +++
drivers/spi/Makefile | 1
Hi Mike,
On Sun, Jan 22, 2012 at 10:30 PM, Mike Frysinger vap...@gentoo.org wrote:
This adds a SPI flash driver which simulates SPI flash clients.
Currently supports the bare min that U-Boot requires: you can
probe, read, erase, and write. Should be easy to extend to make
it behave more
Hi Mike,
On Sun, Jan 22, 2012 at 10:30 PM, Mike Frysinger vap...@gentoo.org wrote:
Signed-off-by: Mike Frysinger vap...@gentoo.org
Acked-by: Simon Glass s...@chromium.org
---
arch/sandbox/cpu/os.c | 13 +
include/os.h | 1 +
2 files changed, 14 insertions(+), 0
On Monday 23 January 2012 19:31:23 Simon Glass wrote:
On Sun, Jan 22, 2012 at 10:30 PM, Mike Frysinger wrote:
This adds a SPI framework for people to hook up simulated SPI clients.
I don't know the SPI interface as well as use - might be useful to
have a few comments and debug() things when
On Monday 23 January 2012 19:41:42 Simon Glass wrote:
On Sun, Jan 22, 2012 at 10:30 PM, Mike Frysinger wrote:
--- /dev/null
+++ b/drivers/mtd/spi/sandbox.c
+#include common.h
+#include malloc.h
+#include spi.h
+#include os.h
+
+#include spi_flash.h
+#include
On Monday 23 January 2012 19:44:15 Simon Glass wrote:
Is this used by earlier patches (iwc it probably should go earlier) or
is it new?
it is not (anymore). i meant to only send out the first five, but this doesn't
hurt. i'll probably leave it in my local branch until someone needs it.
I
Hi Joe,
On Thu, Jan 19, 2012 at 4:53 PM, Joe Hershberger joe.hershber...@ni.com wrote:
MAC-seeded rand() will be needed by link-local as well, so give it
an interface
Signed-off-by: Joe Hershberger joe.hershber...@ni.com
Acked-by: Simon Glass s...@chromium.org
Cc: Joe Hershberger
Hi Joe,
On Thu, Jan 19, 2012 at 4:53 PM, Joe Hershberger joe.hershber...@ni.com wrote:
Signed-off-by: Joe Hershberger joe.hershber...@ni.com
Cc: Joe Hershberger joe.hershber...@gmail.com
Cc: Wolfgang Denk w...@denx.de
---
arch/powerpc/cpu/mpc8xx/fec.c | 2 +-
include/net.h
On Thu, Jan 19, 2012 at 4:53 PM, Joe Hershberger joe.hershber...@ni.com wrote:
Signed-off-by: Joe Hershberger joe.hershber...@ni.com
Acked-by: Simon Glass s...@chromium.org
Cc: Joe Hershberger joe.hershber...@gmail.com
Cc: Wolfgang Denk w...@denx.de
---
include/net.h | 3 +-
Hi Joe,
On Thu, Jan 19, 2012 at 4:53 PM, Joe Hershberger joe.hershber...@ni.com wrote:
Signed-off-by: Joe Hershberger joe.hershber...@ni.com
Cc: Joe Hershberger joe.hershber...@gmail.com
Cc: Wolfgang Denk w...@denx.de
---
include/configs/am3517_crane.h | 2 +-
On Thu, Jan 19, 2012 at 4:53 PM, Joe Hershberger joe.hershber...@ni.com wrote:
Signed-off-by: Joe Hershberger joe.hershber...@ni.com
Cc: Joe Hershberger joe.hershber...@gmail.com
Cc: Wolfgang Denk w...@denx.de
Acked-by: Simon Glass s...@chromium.org
---
net/net.c | 25
Hi Joe,
On Fri, Jan 20, 2012 at 12:15 PM, Joe Hershberger
joe.hershber...@gmail.com wrote:
Hi Simon,
On Fri, Jan 20, 2012 at 10:22 AM, Simon Glass s...@chromium.org wrote:
Hi Joe,
On Thu, Jan 19, 2012 at 4:53 PM, Joe Hershberger joe.hershber...@ni.com
wrote:
The mv_eth driver should not
Hi Joe,
On Fri, Jan 20, 2012 at 12:21 PM, Joe Hershberger
joe.hershber...@gmail.com wrote:
Hi Simon,
On Fri, Jan 20, 2012 at 10:30 AM, Simon Glass s...@chromium.org wrote:
Hi Joe,
On Thu, Jan 19, 2012 at 4:53 PM, Joe Hershberger joe.hershber...@ni.com
wrote:
Signed-off-by: Joe
Hi Joe,
On Thu, Jan 19, 2012 at 4:53 PM, Joe Hershberger joe.hershber...@ni.com wrote:
Rename parameter len to payload_len in NetSendUDPPacket: this name
more explicitly claims that it does not include the header size
Rename CDPHandler to CDPReceive: this is not called as a handler,
so
Hi Simon,
On Tue, Jan 24, 2012 at 12:09 AM, Simon Glass s...@chromium.org wrote:
Hi Joe,
On Fri, Jan 20, 2012 at 12:15 PM, Joe Hershberger
joe.hershber...@gmail.com wrote:
Hi Simon,
On Fri, Jan 20, 2012 at 10:22 AM, Simon Glass s...@chromium.org wrote:
Hi Joe,
On Thu, Jan 19, 2012 at
Hi Joe,
On Thu, Jan 19, 2012 at 4:53 PM, Joe Hershberger joe.hershber...@ni.com wrote:
ICMP (ping) was reimplementing IP header code... it now shares code.
Signed-off-by: Joe Hershberger joe.hershber...@ni.com
Cc: Joe Hershberger joe.hershber...@gmail.com
Cc: Wolfgang Denk w...@denx.de
---
On Thu, Jan 19, 2012 at 4:53 PM, Joe Hershberger joe.hershber...@ni.com wrote:
Signed-off-by: Joe Hershberger joe.hershber...@ni.com
Cc: Joe Hershberger joe.hershber...@gmail.com
Cc: Wolfgang Denk w...@denx.de
Acked-by: Simon Glass s...@chromium.org
---
net/arp.c | 13 -
Hi Joe,
On Thu, Jan 19, 2012 at 4:53 PM, Joe Hershberger joe.hershber...@ni.com wrote:
Signed-off-by: Joe Hershberger joe.hershber...@ni.com
Cc: Joe Hershberger joe.hershber...@gmail.com
Cc: Wolfgang Denk w...@denx.de
---
net/bootp.c | 26 ++
1 files changed, 14
Hi Simon,
On Tue, Jan 24, 2012 at 1:05 AM, Simon Glass s...@chromium.org wrote:
Hi Joe,
On Thu, Jan 19, 2012 at 4:53 PM, Joe Hershberger joe.hershber...@ni.com
wrote:
Signed-off-by: Joe Hershberger joe.hershber...@ni.com
Cc: Joe Hershberger joe.hershber...@gmail.com
Cc: Wolfgang Denk
64 matches
Mail list logo