The function return from P_FUNCT2MUX(per) takes 2 bits, however
for BF537_FAMILY with offset != 1 the function is 1 bit.
Also has small refactor for better readability.
In portmux_setup(), it looks odd having muxreg = ~(3 1);
while in current code we do muxreg |= (function offset);.
Hi Simon,
On 27.06.13 19:43, Simon Glass wrote:
At present mkimage is set up to always build with image signing support.
This means that the SSL libraries (e.g. libssl-dev) are always required.
Adjust things so that mkimage can be built with and without image signing,
controlled by the
Hi Andreas,
On Thu, Jun 27, 2013 at 11:48 PM, Andreas Bießmann
andreas.de...@googlemail.com wrote:
Hi Simon,
On 27.06.13 19:43, Simon Glass wrote:
At present mkimage is set up to always build with image signing support.
This means that the SSL libraries (e.g. libssl-dev) are always
Hi Stefan,
On Thu, Jun 27, 2013 at 9:12 PM, Stefan Roese s...@denx.de wrote:
Hi Simon,
On 06/28/2013 04:14 AM, Simon Glass wrote:
I can create something with or without compression and I cannot see the
failure. Tom is seeing it though. I will see if I can get another board
to try. If
Hi Simon,
On 28.06.13 08:52, Simon Glass wrote:
Hi Andreas,
On Thu, Jun 27, 2013 at 11:48 PM, Andreas Bießmann
andreas.de...@googlemail.com mailto:andreas.de...@googlemail.com wrote:
snip
+# TODO(s...@chromium.org mailto:s...@chromium.org): Is this
correct on Mac OS?
I'll
On 06/28/2013 08:58 AM, Simon Glass wrote:
One idea: It might have something to do with the interrupt disabling, as
powerpc compresses to 0. And thats the location of the interrupt vectors
(timer?). Just an idea. Do you remember shuffling the
disable_interrupts() call around?
Interfaces exposed by error.h seems not to be used in rsa-sig.c, remove it.
This also fixes an compile error on OS X:
---8---
u-boot/lib/rsa/rsa-sign.c:23:19: error: error.h: No such file or directory
---8---
Signed-off-by: Andreas Bießmann andreas.de...@googlemail.com
---
At least rsa-sig
Hi Andreas,
On Fri, Jun 28, 2013 at 12:02 AM, Andreas Bießmann
andreas.de...@googlemail.com wrote:
Hi Simon,
On 28.06.13 08:52, Simon Glass wrote:
Hi Andreas,
On Thu, Jun 27, 2013 at 11:48 PM, Andreas Bießmann
andreas.de...@googlemail.com mailto:andreas.de...@googlemail.com
wrote:
Hi Stefan,
On Fri, Jun 28, 2013 at 12:04 AM, Stefan Roese s...@denx.de wrote:
On 06/28/2013 08:58 AM, Simon Glass wrote:
One idea: It might have something to do with the interrupt
disabling, as
powerpc compresses to 0. And thats the location of the interrupt
vectors
This restores the ordering of interrupt disable to what it what before
commit 35fc84fa. It seems that on some archiectures (e.g. PowerPC) the
OS is loaded into an interrupt region, which can cause problems if
interrupts are still running.
Signed-off-by: Simon Glass s...@chromium.org
---
make sf update work with unaligned `len' parameter, by deleting the
whole last sector before writing, so to allow for:
sf update ${load_addr_r} 0 ${filesize}
Signed-off-by: Gerlando Falauto gerlando.fala...@keymile.com
Cc: Valentin Longchamp valentin.longch...@keymile.com
Cc: Holger Brunck
Since sf update erases the last block as a whole, but only rewrites
the meaningful initial part of it, the rest would be left erased,
potentially erasing meaningful information.
So, as a safety measure, have it rewrite the original content.
Signed-off-by: Gerlando Falauto
Hi,
this patchset allows sf update to erase+write a number of bytes which is not a
multiple of the sector size. Start address must still be sector-aligned though.
The first patch trivially makes it such it will always erase an entire sector
before writing, regardless of the amount of data to
This reverts commit 35fc84fa1ff51e15ecd3e464dac87eb105ffed30.
This bootm refactor breaks bootm on some boards, and the cause is as yet
unknown. The changes to image.h are left alone.
We may need to apply this until the bootm problem is understood and I have
some more automated tests. Hopefully
This reverts commit d0ae31eb0714a8b44dcdb644f8b68dafdbc1c197.
Signed-off-by: Simon Glass s...@chromium.org
---
common/cmd_bootm.c | 19 ++-
1 file changed, 2 insertions(+), 17 deletions(-)
diff --git a/common/cmd_bootm.c b/common/cmd_bootm.c
index ba0bcd4..0cd9cc3 100644
---
Hi Stefan,
On Fri, Jun 28, 2013 at 12:12 AM, Simon Glass s...@chromium.org wrote:
Hi Stefan,
On Fri, Jun 28, 2013 at 12:04 AM, Stefan Roese s...@denx.de wrote:
On 06/28/2013 08:58 AM, Simon Glass wrote:
One idea: It might have something to do with the interrupt
disabling, as
-Original Message-
From: Wood Scott-B07421
Sent: Thursday, June 27, 2013 6:33 AM
To: Zhang Ying-B40530
Cc: u-boot@lists.denx.de; aflem...@gmail.com; Xie Xiaobo-R63061; Zhang
Ying-B40530
Subject: Re: [PATCH 6/7 v6] nand: tpl : introduce the TPL based on the SPL
On 06/26/2013 02:18:31
On 06/28/2013 09:46 AM, Simon Glass wrote:
This restores the ordering of interrupt disable to what it what before
commit 35fc84fa. It seems that on some archiectures (e.g. PowerPC) the
OS is loaded into an interrupt region, which can cause problems if
interrupts are still running.
Patch 35fc84fa1 [Refactor the bootm command to reduce code duplication]
breaks booting Linux (compressed uImage with fdt) on powerpc.
boot_jump_linux() mustn't be called before boot_prep_linux() and
boot_body_linux() have been called. So remove the superfluous call
to boot_jump_linux() in
Hi Simon,
On 28/06/13 10:02, Andreas Bießmann wrote:
Hi Simon,
On 28.06.13 08:52, Simon Glass wrote:
Hi Andreas,
On Thu, Jun 27, 2013 at 11:48 PM, Andreas Bießmann
andreas.de...@googlemail.com mailto:andreas.de...@googlemail.com wrote:
snip
+# TODO(s...@chromium.org
Hi Marek,
On Sat, 22 Jun 2013 15:26:21 +0200, Marek Vasut ma...@denx.de wrote:
The following changes since commit fbf87b1823dd5ebc2a384711ea2c677543019ece:
arm: optimize relocate_code routine (2013-06-21 23:05:50 +0200)
are available in the git repository at:
-Original Message-
From: Fabio Estevam [mailto:feste...@gmail.com]
Sent: Friday, June 28, 2013 10:15 AM
To: Otavio Salvador
Cc: Andy Voltz; U-Boot Mailing List; Estevam Fabio-R49496; Stefano
Babic; Wang Huan-B18965
Subject: Re: [U-Boot] [PATCH v4 1/2] vf610twr: Add default
On 06/27/2013 12:36 AM, Scott Wood wrote:
On 06/25/2013 11:09:04 PM, Prabhakar Kushwaha wrote:
On 06/25/2013 08:38 PM, Scott Wood wrote:
On 06/25/2013 12:03:56 AM, Prabhakar Kushwaha wrote:
CONFIG_SPL_BUILD creates debug TLB entry, so disable it before
init_tlbs.
CONFIG_SPL_INIT_MINIMAL
When a board (slave) boots from SRIO/PCIE, it would get the instructions
from a remote board (master) by SRIO/PCIE interface, and the slave's
u-boot image should be built with the
SYS_TEXT_BASE=0xFFF8;
So the u-boot of the slave should avoid the NOR_BOOT branch at the
booting stage.
On Fri, 2013-06-28 at 13:09 +0800, Stephen Warren wrote:
On 06/27/2013 09:59 PM, Jim Lin wrote:
On Fri, 2013-06-28 at 02:20 +0800, Stephen Warren wrote:
On 06/27/2013 03:45 AM, Jim Lin wrote:
TFTP booting is observed a little bit slow, especially when a USB
keyboard is installed.
The
Hi Simon,
On 20 June 2013 12:40, Inderpal Singh inderpal.si...@linaro.org wrote:
Hi Simon,
Thanks for review.
On 11 June 2013 19:57, Simon Glass s...@chromium.org wrote:
Hi,
On Fri, Jun 7, 2013 at 4:56 AM, Inderpal Singh inderpal.si...@linaro.org
wrote:
Not all boards based on
Hi!
socfpga: Separating the configuration file for Virtual Target and
real hardware Cyclone V development kit
Signed-off-by: Chin Liang See cl...@altera.com
---
include/configs/socfpga_cyclone5.h | 28 +---
1 files changed, 21 insertions(+), 7 deletions(-)
Hi!
socfpga: Adding System Manager driver which will configure the pin mux
for real hardware Cyclone V development kit (not Virtual Platform)
Signed-off-by: Chin Liang See cl...@altera.com
diff --git a/arch/arm/cpu/armv7/socfpga/system_manager.c
Hi!
socfpga: Consolidating reset code into reset_manager.c. Also separating
reset configuration for virtual target and real hardware Cyclone V
development kit
Signed-off-by: Chin Liang See cl...@altera.com
+++ b/arch/arm/cpu/armv7/socfpga/reset_manager.c
@@ -0,0 +1,50 @@
+/*
+ *
On Fri, Jun 28, 2013 at 5:59 AM, Wang Huan-B18965 b18...@freescale.com wrote:
-Original Message-
From: Fabio Estevam [mailto:feste...@gmail.com]
Sent: Friday, June 28, 2013 10:15 AM
To: Otavio Salvador
Cc: Andy Voltz; U-Boot Mailing List; Estevam Fabio-R49496; Stefano
Babic; Wang
On Fri, Jun 28, 2013 at 5:59 AM, Wang Huan-B18965 b18...@freescale.com wrote:
[Alison Wang] mem=128M is not needed with the latest kernel.
Thanks for confirming, Alison.
Could you please test Otavio's patch?
___
U-Boot mailing list
Hi Fabio,
On Thu, Jun 27, 2013 at 10:14:40PM -0400, Fabio Estevam wrote:
On Thu, Jun 27, 2013 at 11:12 PM, Otavio Salvador
ota...@ossystems.com.br wrote:
Just curious: why do we need to pass mem=128M?
Board fails to boot otherwise ... Andy did try it so he can explain it
with more
On Fri, Jun 28, 2013 at 9:48 AM, Andy Voltz andy.vo...@timesys.com wrote:
Hi Fabio,
On Thu, Jun 27, 2013 at 10:14:40PM -0400, Fabio Estevam wrote:
On Thu, Jun 27, 2013 at 11:12 PM, Otavio Salvador
ota...@ossystems.com.br wrote:
Just curious: why do we need to pass mem=128M?
Board fails
On Fri, Jun 28, 2013 at 9:48 AM, Andy Voltz andy.vo...@timesys.com wrote:
Hi Fabio,
On Thu, Jun 27, 2013 at 10:14:40PM -0400, Fabio Estevam wrote:
On Thu, Jun 27, 2013 at 11:12 PM, Otavio Salvador
ota...@ossystems.com.br wrote:
Just curious: why do we need to pass mem=128M?
Board fails
On Fri, Jun 28, 2013 at 9:48 AM, Andy Voltz andy.vo...@timesys.com wrote:
It probably makes the most sense to just drop mem arg from the environment,
and
then we can patch our kernel to fix the memory setup issue.
Agreed, Andy.
Thanks,
Fabio Estevam
We've been dropping SoC name from U-Boot prompt as it increase
complexity for automatic testing and makes line longer for no good
reason.
Signed-off-by: Otavio Salvador ota...@ossystems.com.br
---
Changes in v5: None
Changes in v4: None
Changes in v3: None
Changes in v2: None
This adds a default environment which should be able to support both
3.0.15 from Timesys and upcoming 3.11.
Signed-off-by: Otavio Salvador ota...@ossystems.com.br
---
Changes in v5:
- remove mem=128M param (Alison/Andy/Fabio)
Changes in v4:
- revert sys text address change (Alison)
- add
On Fri, Jun 28, 2013 at 10:02:03AM +0200, Stefan Roese wrote:
Patch 35fc84fa1 [Refactor the bootm command to reduce code duplication]
breaks booting Linux (compressed uImage with fdt) on powerpc.
boot_jump_linux() mustn't be called before boot_prep_linux() and
boot_body_linux() have been
On Fri, Jun 28, 2013 at 08:52:59AM -0400, Otavio Salvador wrote:
This adds a default environment which should be able to support both
3.0.15 from Timesys and upcoming 3.11.
Signed-off-by: Otavio Salvador ota...@ossystems.com.br
---
I boot tested these patches using a yocto build. With our
On Fri, Jun 28, 2013 at 08:53:00AM -0400, Otavio Salvador wrote:
We've been dropping SoC name from U-Boot prompt as it increase
complexity for automatic testing and makes line longer for no good
reason.
Signed-off-by: Otavio Salvador ota...@ossystems.com.br
Tested-by: Andy Voltz
On 06/28/2013 03:03 PM, Tom Rini wrote:
Patch 35fc84fa1 [Refactor the bootm command to reduce code duplication]
breaks booting Linux (compressed uImage with fdt) on powerpc.
boot_jump_linux() mustn't be called before boot_prep_linux() and
boot_body_linux() have been called. So remove the
On 26/06/2013 18:53, Fabio Estevam wrote:
Signed-off-by: Fabio Estevam fabio.este...@freescale.com
---
Applied to u-boot-imx, thanks !
Best regards,
Stefano Babic
--
=
DENX Software Engineering GmbH, MD: Wolfgang Denk
Hi Fabio, hi Marek,
On 26/06/2013 21:56, Marek Vasut wrote:
Dear Fabio Estevam,
Currently we have the following on boot:
CPU: Freescale i.MX28 rev1.2 at 454 MHz
BOOT: SSP SD/MMC #0, 3V3
DRAM: 128 MiB
MMC: MXS MMC: 0
Video: MXSFB: 'videomode' variable not set!In:serial
Break
On 28/06/2013 14:53, Otavio Salvador wrote:
We've been dropping SoC name from U-Boot prompt as it increase
complexity for automatic testing and makes line longer for no good
reason.
Signed-off-by: Otavio Salvador ota...@ossystems.com.br
---
Applied to u-boot-imx, thanks !
Best regards,
On 28/06/2013 14:52, Otavio Salvador wrote:
This adds a default environment which should be able to support both
3.0.15 from Timesys and upcoming 3.11.
Signed-off-by: Otavio Salvador ota...@ossystems.com.br
---
Applied to u-boot-imx, thanks !
Best regards,
Stefano Babic
--
Hi Albert,
some fixes and pending patches. Please pull from u-boot-imx, thanks !
The following changes since commit 4a1c7b13ae104d4526d3176793b7f6b06694df15:
vf610twr: Drop unneeded 'status' variable (2013-06-06 17:52:08 +0200)
are available in the git repository at:
On Fri, Jun 28, 2013 at 11:57 AM, Stefano Babic sba...@denx.de wrote:
That is correct - as it is a very small change, I fix it myself by
applying the patch.
Thanks, Stefano!
Applied to u-boot-imx, thanks !
Best regards,
Stefano Babic
___
U-Boot
This serie introduce the support of the TI816X EVM board.
The serie fits into the existing AM33XX SoC support and reuse some definitions
from the TI814X.
Based on the implementation in the TI-PSP-04.00.02.14 vendor tree:
http://arago-project.org/git/projects/?p=u-boot-omap3.git;a=summary
It has
Rename some CONFIG_TI814X to a more generic CONFIG_81XX
Signed-off-by: Antoine Tenart aten...@adeneo-embedded.com
---
Makefile|2 +-
arch/arm/cpu/armv7/Makefile |2 +-
arch/arm/cpu/armv7/omap-common/Makefile |2 +-
Signed-off-by: Antoine Tenart aten...@adeneo-embedded.com
---
arch/arm/cpu/armv7/am33xx/Makefile |1 +
arch/arm/cpu/armv7/am33xx/clock_ti814x.c | 95 -
arch/arm/cpu/armv7/am33xx/clock_ti816x.c | 445
Signed-off-by: Antoine Tenart aten...@adeneo-embedded.com
---
MAINTAINERS |4 +
board/ti/ti816x/Makefile | 47 +
board/ti/ti816x/evm.c| 229 ++
boards.cfg |1 +
include/configs/ti816x_evm.h |
Hi Inderpal,
On Thu, Jun 20, 2013 at 12:10 AM, Inderpal Singh
inderpal.si...@linaro.orgwrote:
Hi Simon,
Thanks for review.
On 11 June 2013 19:57, Simon Glass s...@chromium.org wrote:
Hi,
On Fri, Jun 7, 2013 at 4:56 AM, Inderpal Singh inderpal.si...@linaro.org
wrote:
Not all boards
Hi Chin Liang,
On 06/28/2013 06:05 PM, Chin Liang See wrote:
socfpga: Separating the configuration file for Virtual Target and
real hardware Cyclone V development kit
Signed-off-by: Chin Liang See cl...@altera.com
---
include/configs/socfpga_cyclone5.h | 28 +---
On 06/28/2013 04:05:43 AM, Prabhakar Kushwaha wrote:
On 06/27/2013 12:36 AM, Scott Wood wrote:
On 06/25/2013 11:09:04 PM, Prabhakar Kushwaha wrote:
then it should be like this. slightly complex.
#if defined(CONFIG_SYS_PPC_E500_DEBUG_TLB)
!(defined(CONFIG_NAND_SPL) || \
In the following commit:
dfu: Support larger than memory transfers.
SHA1: ea2453d56b8860dbd18a3c517531ffc8dcb5c839
The ext4{read|write} command formatting has been changed. It removed
a write mandatory [sizebytes] parameter.
It extents DFU_FS_EXT4 case at mmc_file_op to provide mandatory
For the first eMMC read of data for upload, use the large dfu_buf (now
configurable) instead of usb request buffer allocated at composite layer
(which is 4KiB) [*].
For eMMC the whole file is read, which usually is larger than the buffer [*]
provided with usb request.
Signed-off-by: Lukasz
Commit:
dfu: make data buffer size configurable
SHA1: 89a72b2e0e141042c9109185e02d39b2107ffc62
replaced statically allocated buffers with one allocated with memalign.
Malloc pool size of 1MiB was too small, since we needed bigger buffer to
transfer for example uImage.
Signed-off-by: Lukasz
The following changes since commit 2f998071254d566c71c34ef013aef1d9d0ec0fa3:
image: Use ENOENT instead of ENOMEDIUM for better compatibility (2013-06-17
09:56:42 -0400)
are available in the git repository at:
git://git.denx.de/u-boot-nand-flash.git master
for you to fetch changes up to
With 35fc84fa1 [Refactor the bootm command to reduce code duplication]
we stopped checking the return value of bootm_load_os (unintentionally!)
and simply returned if we had a non-zero return value from the function.
This broke the valid case of a legacy image file of a single kernel
loaded into
Hi Pavel,
On Fri, 2013-06-28 at 13:40 +0200, ZY - pavel wrote:
Hi!
socfpga: Adding System Manager driver which will configure the pin mux
for real hardware Cyclone V development kit (not Virtual Platform)
Signed-off-by: Chin Liang See cl...@altera.com
diff --git
Hi Pavel,
On Fri, 2013-06-28 at 13:22 +0200, ZY - pavel wrote:
Hi!
socfpga: Separating the configuration file for Virtual Target and
real hardware Cyclone V development kit
Signed-off-by: Chin Liang See cl...@altera.com
---
include/configs/socfpga_cyclone5.h | 28
Hi Pavel,
On Fri, 2013-06-28 at 13:44 +0200, ZY - pavel wrote:
Hi!
socfpga: Consolidating reset code into reset_manager.c. Also separating
reset configuration for virtual target and real hardware Cyclone V
development kit
Signed-off-by: Chin Liang See cl...@altera.com
+++
Dear TENART Antoine,
In message 3465d313fdfb824f9a9c8cd24fa4f6bc0112a...@frontmail.adetel.com you
wrote:
Rename some CONFIG_TI814X to a more generic CONFIG_81XX
Signed-off-by: Antoine Tenart aten...@adeneo-embedded.com
---
Makefile|2 +-
Currently, we assume that if we can read from MMC correctly, we have
found a valid image. This is not the case as an empty area will read
just fine. Add a check for a valid IH_MAGIC.
Signed-off-by: Tom Rini tr...@ti.com
---
common/spl/spl_mmc.c |4
1 file changed, 4 insertions(+)
Tom == Tom Rini tr...@ti.com writes:
Tom Currently, we assume that if we can read from MMC correctly, we have
Tom found a valid image. This is not the case as an empty area will read
Tom just fine. Add a check for a valid IH_MAGIC.
Tom Signed-off-by: Tom Rini tr...@ti.com
Reviewed-by:
On 06/28/2013 02:57:55 AM, Zhang Ying-B40530 wrote:
You don't need to mention a dependency on an earlier patch in the same
patchset (and when you do need to mention a dependency, it should be
below the --- line so it doesn't go into the git history). OTOH, you
do need to mention the dependency
I thought I should ask before I screw this up. I have a new uboot that I
load with kwboot. It works fine and I want to write it to nand. I see many
references to write it after loading with tftp but not kwboot. Can I do
this? How? This is to a Guruplug. Using tftp
tftp 0x640 u-boot.kwb
With 35fc84fa1 [Refactor the bootm command to reduce code duplication]
we stopped checking the return value of bootm_load_os (unintentionally!)
and simply returned if we had a non-zero return value from the function.
This broke the valid case of a legacy image file of a single kernel
loaded into
Hi Stefano,
On Fri, 28 Jun 2013 17:05:29 +0200, Stefano Babic sba...@denx.de
wrote:
Hi Albert,
some fixes and pending patches. Please pull from u-boot-imx, thanks !
The following changes since commit 4a1c7b13ae104d4526d3176793b7f6b06694df15:
vf610twr: Drop unneeded 'status' variable
On Thu, Jun 27, 2013 at 9:33 PM, Zhang Haijun-B42677
b42...@freescale.comwrote:
Hi, Fleming
** **
I found the root cause.
Our driver didn’t make a distinction between different board for this
register. (Just distinguish by esdhc version)
On p1025 board watermark level was
Dear Simon Glass,
Make driver model available after relocation, by setting up data structures
and scanning for devices using compiled-in platform_data and (when
available) the device tree.
Signed-off-by: Simon Glass s...@chromium.org
---
Changes in v3: None
Changes in v2: None
Dear Simon Glass,
Add driver model functionality for generic board.
This includes data structures and base code for registering devices and
uclasses (groups of devices with the same purpose, e.g. all I2C ports will
be in the same uclass).
The feature is enabled with CONFIG_DM.
Dear Simon Glass,
+U_BOOT_CMD(
+ dm, 2, 1, do_dm,
+ Driver model low level access,
+ dump Dump driver model tree\n
+ dm uclassDump list of instances for each uclass\n
+ dm test Run tests
+);
Looking at this, remark comes to mind.
On 06/28/2013 03:15:03 PM, kqt4a...@gmail.com wrote:
I thought I should ask before I screw this up. I have a new uboot
that I load with kwboot. It works fine and I want to write it to
nand. I see many references to write it after loading with tftp but
not kwboot. Can I do this? How? This is
Dear Simon Glass,
From: Pavel Herrmann morpheus.i...@gmail.com
This adds a README to help with understanding of this series.
Signed-off-by: Simon Glass s...@chromium.org
---
Changes in v3:
- Updated README.txt to cover changes since version 2
Changes in v2:
- Removed pointer return
Hi Tom,
On Fri, Jun 28, 2013 at 1:25 PM, Tom Rini tr...@ti.com wrote:
With 35fc84fa1 [Refactor the bootm command to reduce code duplication]
we stopped checking the return value of bootm_load_os (unintentionally!)
and simply returned if we had a non-zero return value from the function.
This
Hi Stefan,
On Fri, Jun 28, 2013 at 1:02 AM, Stefan Roese s...@denx.de wrote:
Patch 35fc84fa1 [Refactor the bootm command to reduce code duplication]
breaks booting Linux (compressed uImage with fdt) on powerpc.
boot_jump_linux() mustn't be called before boot_prep_linux() and
Dear Simon Glass,
As an example of how to write a uclass and a driver, provide a demo version
of each, accessible through the 'demo' command.
To use these with driver model, define CONFIG_CMD_DEMO and CONFIG_DM_DEMO.
The two demo drivers are enabled with CONFIG_DM_DEMO_SIMPLE and
On Fri, Jun 14, 2013 at 4:14 AM, Wolfgang Denk w...@denx.de wrote:
Dear Kim,
In message 1371198068-3581-1-git-send-email...@denx.de you wrote:
mpc8323erdb.c: In function 'mac_read_from_eeprom':
mpc8323erdb.c:198:3: warning: dereferencing type-punned pointer will
break strict-aliasing
Dear Simon Glass,
Add driver model support for GPIOs. Since existing GPIO drivers do not use
driver model, this feature must be enabled by CONFIG_DM_GPIO. After all
GPO drivers are converted over we can perhaps remove this config.
Tests are provided for the sandbox implementation, and are a
This changes were being done in every version of U-Boot and it
makes sense to try to merge them upstream.
Please review them and ack/nack them.
Otavio Salvador (6):
mx53loco: Change default environment to cope with OE changes
mx6qsabrelite: Change default environment to cope with OE changes
OpenEmbedded has change partitioning layout of generated image so it
does not raise warnings during the boot regarding unkown partition
being used for U-Boot.
Signed-off-by: Otavio Salvador ota...@ossystems.com.br
---
include/configs/mx53loco.h | 4 ++--
1 file changed, 2 insertions(+), 2
OpenEmbedded has change partitioning layout of generated image so it
does not raise warnings during the boot regarding unkown partition
being used for U-Boot.
Signed-off-by: Otavio Salvador ota...@ossystems.com.br
---
include/configs/mx6qsabrelite.h | 4 ++--
1 file changed, 2 insertions(+), 2
OpenEmbedded has change partitioning layout of generated image so it
does not raise warnings during the boot regarding unkown partition
being used for U-Boot.
Signed-off-by: Otavio Salvador ota...@ossystems.com.br
---
include/configs/mx6slevk.h | 4 ++--
1 file changed, 2 insertions(+), 2
OpenEmbedded has change partitioning layout of generated image so it
does not raise warnings during the boot regarding unkown partition
being used for U-Boot.
Signed-off-by: Otavio Salvador ota...@ossystems.com.br
---
include/configs/mx53ard.h | 4 ++--
1 file changed, 2 insertions(+), 2
OpenEmbedded has change partitioning layout of generated image so it
does not raise warnings during the boot regarding unkown partition
being used for U-Boot.
Signed-off-by: Otavio Salvador ota...@ossystems.com.br
---
include/configs/wandboard.h | 4 ++--
1 file changed, 2 insertions(+), 2
OpenEmbedded has change partitioning layout of generated image so it
does not raise warnings during the boot regarding unkown partition
being used for U-Boot.
Signed-off-by: Otavio Salvador ota...@ossystems.com.br
---
include/configs/mx51evk.h | 4 ++--
1 file changed, 2 insertions(+), 2
On Fri, Jun 28, 2013 at 6:52 PM, Otavio Salvador
ota...@ossystems.com.br wrote:
This changes were being done in every version of U-Boot and it
makes sense to try to merge them upstream.
Please review them and ack/nack them.
I think the series look good:
Reviewed-by: Fabio Estevam
On Fri, Jun 28, 2013 at 02:41:49PM -0700, Simon Glass wrote:
Hi Tom,
On Fri, Jun 28, 2013 at 1:25 PM, Tom Rini tr...@ti.com wrote:
With 35fc84fa1 [Refactor the bootm command to reduce code duplication]
we stopped checking the return value of bootm_load_os (unintentionally!)
and simply
On Fri, Jun 28, 2013 at 10:00:58AM +0200, Stefan Roese wrote:
On 06/28/2013 09:46 AM, Simon Glass wrote:
This restores the ordering of interrupt disable to what it what before
commit 35fc84fa. It seems that on some archiectures (e.g. PowerPC) the
OS is loaded into an interrupt region, which
On Thu, Jun 27, 2013 at 10:43:18AM -0700, Simon Glass wrote:
At present mkimage is set up to always build with image signing support.
This means that the SSL libraries (e.g. libssl-dev) are always required.
Adjust things so that mkimage can be built with and without image signing,
On Fri, Jun 28, 2013 at 10:02:03AM +0200, Stefan Roese wrote:
Patch 35fc84fa1 [Refactor the bootm command to reduce code duplication]
breaks booting Linux (compressed uImage with fdt) on powerpc.
boot_jump_linux() mustn't be called before boot_prep_linux() and
boot_body_linux() have been
Hey all,
I've tagged and pushed v2013.07-rc2. A bit more over the place than I
should have gone, but picked up a lot of things that have been
outstanding for a while. The big thing is a refactor of the boot loop.
Everything should be working right now, but please test. Related to
this is the
Use structs instead of computing offsets for accessing individual
registers. The base address of the USB controller is still an offset
defined in SoC headers as it can differ between SoCs.
Signed-off-by: Sascha Silbe t-ub...@infra-silbe.de
---
Tested on CuBox Pro only.
Dear Wolfgang Denk,
Wolfgang Denk w...@denx.de writes:
-#define rdl(off)readl(MVUSB0_BASE + (off))
-#define wrl(off, val) writel((val), MVUSB0_BASE + (off))
+#define rdl(base, off) readl((base) + (off))
+#define wrl(base, off, val) writel((val), (base) + (off))
socfpga: Separating the configuration file for Virtual
Target and real hardware Cyclone V development kit
Signed-off-by: Chin Liang See cl...@altera.com
---
include/configs/socfpga_cyclone5.h | 28 +---
1 file changed, 21 insertions(+), 7 deletions(-)
diff --git
socfpga: Adding System Manager driver which will
configure the pin mux for real hardware Cyclone V
development kit (not Virtual Platform)
Signed-off-by: Chin Liang See cl...@altera.com
---
arch/arm/cpu/armv7/socfpga/Makefile|2 +-
arch/arm/cpu/armv7/socfpga/spl.c
socfpga: Consolidating reset code into reset_manager.c.
Also separating reset configuration for virtual target
and real hardware Cyclone V development kit
Signed-off-by: Chin Liang See cl...@altera.com
---
arch/arm/cpu/armv7/socfpga/Makefile |2 +-
Dear Chin Liang See,
In message 1372451028.11240.2.ca...@drezykow-virtualbox.altera.com you wrote:
socfpga: Separating the configuration file for Virtual
Target and real hardware Cyclone V development kit
Please keep the Subject SHORT - it should be 50 characters or less!
And please do not
Dear Chin Liang See,
In message 1372452523.11240.4.ca...@drezykow-virtualbox.altera.com you wrote:
socfpga: Consolidating reset code into reset_manager.c.
Also separating reset configuration for virtual target
and real hardware Cyclone V development kit
Arghhh... 154 characters in the
1 - 100 of 104 matches
Mail list logo
