Hi Minkyu Kang,
On Thu, Jul 4, 2013 at 11:27 AM, Minkyu Kang mk7.k...@samsung.com wrote:
On 04/07/13 14:27, Rajeshwari Birje wrote:
Hi Minkyu Kang,
On Thu, Jul 4, 2013 at 7:31 AM, Minkyu Kang mk7.k...@samsung.com wrote:
diff --git a/arch/arm/include/asm/arch-exynos/cpu.h
Dear Timur Tabi,
In message caozdjxwikugm5woxq5nwkpnbugoeuslozpsbt1jjln2c+m+...@mail.gmail.com
you wrote:
On Fri, Jun 28, 2013 at 4:47 PM, Andy Fleming aflem...@gmail.com wrote:
Well, he hasn't been at Freescale for years, now, so that's not surprising.
It's not entirely clear to me
smdk5250-uboot-spl.lds is moved to common folder, so that it can be reused.
It is renamed to exynos-uboot-spl.lds
Signed-off-by: Rajeshwari Shinde rajeshwar...@samsung.com
Acked-by: Simon Glass s...@chromium.org
Tested-by: Simon Glass s...@chromium.org
---
Changes in V2:
- None
Changes in
This patch adds APIs to get power reset status and exit the wakeup condition for
both exynos5 and exynos4
Signed-off-by: Rajeshwari Shinde rajeshwar...@samsung.com
---
Changes in V2:
- Expanded the comments for get_reset_status function declaration.
Changes in V3:
- None
Changes
This patch configures the gpio values for UART
on Origen and SMDKV310 using pinmux
Signed-off-by: Rajeshwari Shinde rajeshwar...@samsung.com
Acked-by: Simon Glass s...@chromium.org
---
Changes in V2:
- None
Changes in V3:
- None
Changes in V4:
- None
Convert the assembly code in board/samsung to c and move the same to arch/arm.
lds file made common across SMDKV310, Origen and SMDK5250.
Add the power reset and exit wakeup api for exynos.
Initialise GPIO for uart in Origen and SMDKV310 using pinmux.
Changes in V2:
- Rebased on latest
On 7/4/2013 6:12 AM, Scott Wood wrote:
On 07/02/2013 10:11:49 PM, Josh Wu wrote:
+if (!get_onfi_ecc_param(chip, cap, sector_size))
+MTDDEBUG(MTD_DEBUG_LEVEL1, ONFI params, minimum
required ECC: %d bits in %d bytes\n,
+*cap, *sector_size);
Use braces
1. if CONFIG_SYS_NAND_ONFI_DETECTION is defined, driver will check NAND flash's
ecc minimum requirement in ONFI parameter.
a) if CONFIG_PMECC_CAP, CONFIG_PMECC_SECTOR_SIZE are defined. then use it.
Driver will display a WARNING if the values are different from ONFI
parameters.
On 06/28/2013 03:00 AM, Masahiro Yamada wrote:
Hello Andre,
Hi,
thanks a lot for the review! I included most of the fixes you proposed
in the next version I will send out soon.
Very useful comments, thanks again!
diff --git a/arch/arm/include/asm/armv7.h b/arch/arm/include/asm/armv7.h
index
Tom +A further word of warning about using eMMC and partition tables. When
Tom +working with SD cards we can get away with erasing small areas at a time,
Tom +however on eMMC we must keep erases aligned to eraseblocks and thus the
Tom +first erase we issue will erase the partition table.
Peter
Hello,
I found bootz command causes 'undefined instruction' exception
on KZM-A9-GT board (armv7) in v2013.07-rc2.
KZM-A9-GT# tftp zImage.kzm9g.v310; bootz
smc911x: detected LAN9221 controller
smc911x: phy initialized
smc911x: MAC 00:01:9b:04:04:05
Using smc911x-0 device
TFTP from server
On 06/28/2013 05:18 AM, Masahiro Yamada wrote:
Hi Andre.
--- a/arch/arm/lib/Makefile
+++ b/arch/arm/lib/Makefile
@@ -60,6 +60,8 @@ COBJS-y += reset.o
COBJS-y += cache.o
COBJS-y += cache-cp15.o
+COBJS-$(CONFIG_ARMV7_VIRT) += virt-v7.o
+
Judging from the file name
Dear Minkyu Kang,
Please let me know if you have any more comments on this patch.
Also, there is another patchset to review:
http://patchwork.ozlabs.org/patch/245307/
Best regards,
Piotr Wilczek
-Original Message-
From: Piotr Wilczek [mailto:p.wilc...@samsung.com]
Sent: Tuesday,
If we have the following entry in cramfs:
= cramfsls
-rw-r--r-- 1922689 uImage
cramfsload would also succeed if we try to do:
= cramfsload uImage_1
CRAMFS load complete: 1922689 bytes loaded to 0x10
The old code succeeds if the begin of the filename we search matches
with a filename stored
Hi, experts:
I found DFU tool code had been put in drivers/dfu directory.
Previously, it was owned by Samsung Electronics.
Because it has been merged into uboot library.
So, it could be used or released by every ARM SOC vendor?
Best wishes,
___
U-Boot
On Thu, 04 Jul 2013 17:20:34 +0800, tiger...@viatech.com.cn wrote:
Hi, experts:
I found DFU tool code had been put in drivers/dfu directory.
Previously, it was owned by Samsung Electronics.
Could you be more specific here?
All DFU related files have following headers:
/*
* g_dnl.c -- USB
From: Arkadiusz Wlodarczyk a.wlodarc...@samsung.com
Configuration file for GONI has been updated to support FAT file system,
new mmc partitioning scheme and read linux kernel from eMMC instead of
OneNAND.
Signed-off-by: Arkadiusz Wlodarczyk a.wlodarc...@samsung.com
Signed-off-by: Kyungmin Park
From: Arkadiusz Wlodarczyk a.wlodarc...@samsung.com
New partitioning scheme has been defined at GONI target. It complies with
new GPT partitioning introduced previously.
Default partition layout has been defined at s5p_goni.h
Signed-off-by: Arkadiusz Wlodarczyk a.wlodarc...@samsung.com
From: Arkadiusz Wlodarczyk a.wlodarc...@samsung.com
This commit enables support for USB mass storage composite function.
It defines platform code and enables it at config file.
Signed-off-by: Arkadiusz Wlodarczyk a.wlodarc...@samsung.com
Signed-off-by: Kyungmin Park kyungmin.p...@samsung.com
From: Arkadiusz Wlodarczyk a.wlodarc...@samsung.com
Proper adjustment for supporting DFU at GONI target has been made.
The s5p_goni.h file has been updated. Moreover the code for low level
USB initialization has been added to GONI board code.
Signed-off-by: Arkadiusz Wlodarczyk
Samsung's GONI target has been updated to support:
- New GPT partition layout
- USB Mass Storage Gadget
- DFU support
- Loading uImage from eMMC not OneNAND
Arkadiusz Wlodarczyk (4):
arm:goni: Update configuration for goni target
arm:goni:dfu Add support for DFU at GONI target
arm:goni:
From: Mingkai Hu mingkai...@freescale.com
The Freescale C29x family is a high performance crypto co-processor.
It combines a single e500v2 core with necessary SEC engine. There're
three SoC types(C291, C292, C293) with the following features:
- 512K L2 Cache/SRAM and 512 KB platform SRAM
-
From: Mingkai Hu mingkai...@freescale.com
C29XPCIE board is a series of Freescale PCIe add-in cards to perform
as public key crypto accelerator or secure key management module. It
includes C293PCIE board, C293PCIE board and C291PCIE board.
- 512KB platform SRAM in addition to 512K L2 Cache/SRAM
Hi Minkyu,
Can you evaluate following patches:
CONFIG (TRATS):
http://patchwork.ozlabs.org/patch/255474/
PMIC (trats):
http://patchwork.ozlabs.org/patch/254152/
and following resend patches (for GONI):
http://patchwork.ozlabs.org/patch/256872/
http://patchwork.ozlabs.org/patch/256873/
This is porting of Freescale's patch from version imx_v2009.08_3.0.35_4.0.0,
that fixes the obvious mistype of bits offset macro name (ACLK_EMI_PODF_OFFSET
was used instead of ACLK_EMI_SLOW_PODF_OFFSET).
Using the occasion, change the variable name 'emi_slow_pof' to more consistent
On 06/28/2013 05:51 AM, Masahiro Yamada wrote:
Hi Andre
[RFC]
I'd like to suggest to separate HYP-switching code
from Non-secure switching.
Thanks for stepping up and providing a use-case!
The first version of the patches had those two separate cases, but I
later merged them in favor of
On 04.07.2013 13:27, Andrew Gabbasov wrote:
This is porting of Freescale's patch from version imx_v2009.08_3.0.35_4.0.0,
that fixes the obvious mistype of bits offset macro name (ACLK_EMI_PODF_OFFSET
was used instead of ACLK_EMI_SLOW_PODF_OFFSET).
Using the occasion, change the variable name
Hi Fabio,
On Fri, 28 Jun 2013 18:56:46 -0300, Fabio Estevam feste...@gmail.com
wrote:
On Fri, Jun 28, 2013 at 6:52 PM, Otavio Salvador
ota...@ossystems.com.br wrote:
This changes were being done in every version of U-Boot and it
makes sense to try to merge them upstream.
Please review
Hi Marek,
On Wed, 3 Jul 2013 15:30:20 +0200, Marek Vasut ma...@denx.de wrote:
Dear Albert ARIBAUD,
Hi Marek,
On Thu, 27 Jun 2013 15:23:33 +0200, Marek Vasut ma...@denx.de wrote:
Hello Albert,
Hi Marek,
On Thu, 27 Jun 2013 13:26:39 +0200, Marek Vasut ma...@denx.de
Hi Tom,
On Wed, 3 Jul 2013 15:47:27 -0400, Tom Rini tr...@ti.com wrote:
On Thu, Jun 27, 2013 at 10:27:26AM +0200, Albert ARIBAUD wrote:
Hi Stefan,
On Tue, 25 Jun 2013 09:14:12 +0200, Stefan Roese s...@denx.de wrote:
Fix a problem with a re-assignment of r8 in the SPL version.
Hi Andreas,
On Sun, 30 Jun 2013 13:15:06 +0200, Andreas Bießmann
andreas.de...@googlemail.com wrote:
Some OS (like OS X) do not provide a generic readelf. We should enforce to use
the toochain provided readelf instead, to do so use $(CROSS_COMPILE)readelf.
Signed-off-by: Andreas Bießmann
Hi Tom,
On Tue, 2 Jul 2013 16:05:52 -0400, Tom Rini tr...@ti.com wrote:
Hello,
The following changes since commit e6c7f86f03b0ad25e9ef70df3ee1989b6b789d7c:
Merge branch 'u-boot-imx/master' into 'u-boot-arm/master' (2013-06-28
17:51:13 +0200)
are available in the git repository at:
On Fri, Jun 14, 2013 at 3:21 AM, Wolfgang Denk w...@denx.de wrote:
diff --git a/board/freescale/mpc8323erdb/mpc8323erdb.c
b/board/freescale/mpc8323erdb/mpc8323erdb.c
index f29b2f4..533cb08 100644
--- a/board/freescale/mpc8323erdb/mpc8323erdb.c
+++ b/board/freescale/mpc8323erdb/mpc8323erdb.c
On 07/03/2013 02:37 PM, Tom Rini wrote:
On Tue, Jul 02, 2013 at 03:05:22PM +0200, Andreas Bie?mann wrote:
On 07/01/2013 03:09 PM, Tom Rini wrote:
With the do_bootm_states re-organization, we have the call to any
potential sub-commands in a single spot. If one fails, we can then stop
right
Signed-off-by: Holger Brunck holger.bru...@keymile.com
---
board/keymile/km_arm/km_arm.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/board/keymile/km_arm/km_arm.c b/board/keymile/km_arm/km_arm.c
index 24fcf70..29f85ff 100644
--- a/board/keymile/km_arm/km_arm.c
+++
CONFIG_BOOTCOUNT_LIMIT is used on all boards from this board series. So
remove this unneeded define.
Signed-off-by: Holger Brunck holger.bru...@keymile.com
---
board/keymile/km_arm/km_arm.c | 4
1 file changed, 4 deletions(-)
diff --git a/board/keymile/km_arm/km_arm.c
From: Karlheinz Jerg karlheinz.j...@keymile.com
The board is similar to the standard km_kirkwood board. From a
u-boot point of view, the only difference is an increased
256 MiB DRAM (128M16). A board based on this design is for
example the SUP12.
Signed-off-by: Karlheinz Jerg
Hi Albert,
On 07/04/2013 02:09 PM, Albert ARIBAUD wrote:
Hi Andreas,
On Sun, 30 Jun 2013 13:15:06 +0200, Andreas Bießmann
andreas.de...@googlemail.com wrote:
Some OS (like OS X) do not provide a generic readelf. We should enforce to
use
the toochain provided readelf instead, to do so
Signed-off-by: Holger Brunck holger.bru...@keymile.com
---
include/configs/km/keymile-common.h | 1 +
1 file changed, 1 insertion(+)
diff --git a/include/configs/km/keymile-common.h
b/include/configs/km/keymile-common.h
index 3b15c4e..cef4860 100644
--- a/include/configs/km/keymile-common.h
+++
This define is not used in u-boot code, we can drop this define safely.
Signed-off-by: Holger Brunck holger.bru...@keymile.com
---
include/configs/km/km83xx-common.h | 1 -
include/configs/km82xx.h | 1 -
2 files changed, 2 deletions(-)
diff --git a/include/configs/km/km83xx-common.h
From: Andreas Huber andreas.hu...@keymile.com
'actual_bank' is not used anymore, instead boot_bank is used.
Signed-off-by: Andreas Huber andreas.hu...@keymile.com
---
board/keymile/scripts/ramfs-common.txt | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git
commit a5510058 powerpc/83xx/km: make local functions and structs static
removed the staticness also from this struct. But this struct is needed
in arch/powerpc/cpu/mpc83xx/cpu_init.c and declared as extern.
Signed-off-by: Holger Brunck holger.bru...@keymile.com
---
Hi Andreas,
On Thu, 04 Jul 2013 15:25:53 +0200, Andreas Bießmann
andreas.de...@googlemail.com wrote:
Hi Albert,
On 07/04/2013 02:09 PM, Albert ARIBAUD wrote:
Hi Andreas,
On Sun, 30 Jun 2013 13:15:06 +0200, Andreas Bießmann
andreas.de...@googlemail.com wrote:
Some OS (like OS X)
Hi,
I have a custom OMAP37xx board running with a fairly uncommon 19.2MHz
oscillator. The general clock setup seems fine so far, but the
dpll5_init_34xx() used in prcm_init() for 36xx cpu-types gives me
trouble in the form of numerous stack dumps in the kernel boot. Reason is:
[
On Thu, Jul 04, 2013 at 03:24:10PM +0200, Andreas Bie?mann wrote:
On 07/03/2013 02:37 PM, Tom Rini wrote:
On Tue, Jul 02, 2013 at 03:05:22PM +0200, Andreas Bie?mann wrote:
On 07/01/2013 03:09 PM, Tom Rini wrote:
With the do_bootm_states re-organization, we have the call to any
potential
On Thu, Jul 4, 2013 at 12:03 AM, Gerlando Falauto
gerlando.fala...@keymile.com wrote:
Since sf update erases the last block as a whole, but only rewrites
the meaningful initial part of it, the rest would be left erased,
potentially erasing meaningful information.
So, as a safety measure, have
hi,
The tlb entries for the pcie mem space for the corenet SoC's is done
for 1.5GiB but certain boards use all the 4 pcie controller
instantiations, and each controller is assigned 512MiB size in the
config files. Should the tlb entries not map 2GiB space as against
1.5GiB. Am i missing something.
Hi,
Did anyone find this TX timeout issue on macb(gmac)?
I observed this issue when i enable d-cache.
Log:
zynq-uboot ping 10.10.70.101
gmac0: PHY present at 7
gmac0: link up, 1000Mbps full-duplex (lpa: 0x3800)
Using gmac0 device
gmac0: TX timeout
gmac0: TX timeout
ping failed; host
Hi,
On Thu, Jul 4, 2013 at 4:32 PM, Tetsuyuki Kobayashi k...@kmckk.co.jpwrote:
Hello,
I found bootz command causes 'undefined instruction' exception
on KZM-A9-GT board (armv7) in v2013.07-rc2.
KZM-A9-GT# tftp zImage.kzm9g.v310; bootz
smc911x: detected LAN9221 controller
smc911x: phy
Hi Robert,
On Thu, Jul 4, 2013 at 12:06 AM, Robert Nelson robertcnel...@gmail.comwrote:
diff --git a/common/cmd_bootm.c b/common/cmd_bootm.c
index 7b3e459..5749057 100644
--- a/common/cmd_bootm.c
+++ b/common/cmd_bootm.c
@@ -1758,6 +1758,10 @@ static int bootz_start(cmd_tbl_t *cmdtp,
A recent bootm fix left the error path incomplete. Reinstate this so that
failures in bootm stages are handled properly.
Signed-off-by: Simon Glass s...@chromium.org
---
Changes in v2:
- Correct checking in the no-error case
common/cmd_bootm.c | 6 +-
1 file changed, 1 insertion(+), 5
In the recent bootm refactor, the PREP stage was missing in the bootz
command. This causes unpredictable behaviour.
The use of a local variable means that the reset of cmd_bootm.c does not
in fact use the same image structure, so remove this.
Also manually set the OS type to Linux, since this is
The original bootm code (before commit 35fc84f) did not check for a valid
boot function in the subcommand case, which was incorrect.
This check was introduced in all cases, but in fact we should only check
for the function when we need it. Otherwise in some cases the check fires
before the OS
This function has no prototype in the headers and passes void * around, thus
requiring several casts. Tidy this up.
- Add new patch to clean up bootz_setup() function
Signed-off-by: Simon Glass s...@chromium.org
---
Changes in v2: None
arch/arm/lib/bootm.c | 14 --
With the move of the interrupt code to earlier in the sequence, we
exposed a problem where the interrupts are disabled at each bootm
stage. This is not correct - it should be done only once. Let's disable
interrupts in the LOAD stage. Put the code in a function for clarity.
Also, bootz lost its
From: Fabio Estevam fabio.este...@freescale.com
Allow the boot of a device tree kernel.
Signed-off-by: Fabio Estevam fabio.este...@freescale.com
---
include/configs/zmx25.h | 1 +
1 file changed, 1 insertion(+)
diff --git a/include/configs/zmx25.h b/include/configs/zmx25.h
index
Hello.
On Thu, 2013-07-04 at 11:37, Lukasz Majewski wrote:
On Thu, 04 Jul 2013 17:20:34 +0800, tiger...@viatech.com.cn wrote:
Hi, experts:
I found DFU tool code had been put in drivers/dfu directory.
Previously, it was owned by Samsung Electronics.
Could you be more specific here?
Hi Jagan Teki,
On 7/5/2013 03:36, Jagan Teki wrote:
Hi,
Did anyone find this TX timeout issue on macb(gmac)?
I observed this issue when i enable d-cache.
Log:
zynq-uboot ping 10.10.70.101
gmac0: PHY present at 7
gmac0: link up, 1000Mbps full-duplex (lpa: 0x3800)
Using gmac0 device
gmac0:
Hi Bo Shen,
Thanks for your info.
On Fri, Jul 5, 2013 at 7:04 AM, Bo Shen voice.s...@atmel.com wrote:
Hi Jagan Teki,
On 7/5/2013 03:36, Jagan Teki wrote:
Hi,
Did anyone find this TX timeout issue on macb(gmac)?
I observed this issue when i enable d-cache.
Log:
zynq-uboot ping
On 07/04/2013 07:52 PM, Lukasz Majewski wrote:
From: Arkadiusz Wlodarczyk a.wlodarc...@samsung.com
Configuration file for GONI has been updated to support FAT file system,
new mmc partitioning scheme and read linux kernel from eMMC instead of
OneNAND.
Signed-off-by: Arkadiusz Wlodarczyk
Hi,
I'm running U-Boot 2013.07-rc2 and seeing Ethernet is failed to
initialize. Is it a known issue or something not supported yet? It's
unlikely my setup problem, since I have a vendor U-Boot running the
board just fine.
Shawn
___
U-Boot mailing
61 matches
Mail list logo