Many (but not all) of Blackfin boards give -O2 option
to compile under lib/ directory.
That means lib/ should be speed-optimized,
whereas other parts should be size-optimized.
We want to keep the same behavior,
but do not want to parse board/*/config.mk again and again.
We've got no choice but to
Kbuild brought about many advantages for us but a significant
performance regression was reported by Simon Glass.
After some discussions and analysis, it turned out
its main cause is in $(call cc-option,...).
Historically, U-Boot parses all config.mk
(arch/*/config.mk and board/*/config.mk)
Kbuild brought about many advantages for us but a significant
performance regression was reported by Simon Glass.
After some discussions and analysis, it turned out
its main cause is in $(call cc-option,...).
Historically, U-Boot parses all config.mk
(arch/*/config.mk and board/*/config.mk)
We want to change the build system to include config.mk
only from ./Makefile and spl/Makefile.
We must prepare for that in this commit.
$(src) is a moving target and not handy for our purpose.
We must replace it with a fixed path.
Signed-off-by: Masahiro Yamada yamad...@jp.panasonic.com
---
Before this commit, USE_PRIVATE_LIBGCC was defined in
arch-specific config.mk and referenced in
arch/$(ARCH)/lib/Makefile.
We are not happy about parsing config.mk again and again.
We have to keep the same behavior with a different way.
By adding CONFIG_ prefix, this macro appears
in
All mip32 boards define CONFIG_MIPS32 in config headers
except malta board which defines it in boards.cfg.
We can consolidate them by defining it in
arch/mips/cpu/mips32/config.mk.
CONFIG_MIPS64 definition can be moved to
arch/mips/cpu/mips64/config.mk as well.
Signed-off-by: Masahiro Yamada
All mips32 boards define CONFIG_MIPS32 in config headers
except malta boards which define it in boards.cfg.
We can consolidate them by defining it in
arch/mips/cpu/mips32/config.mk.
CONFIG_MIPS64 definition can be moved to
arch/mips/cpu/mips64/config.mk as well.
Signed-off-by: Masahiro Yamada
Before this commit, CONFIG_MPC8260 and CONFIG_8260
were used mixed-up.
All boards with mpc8260 cpu defined both of them:
- CONFIG_MPC8260 was defined in board config headers
and include/common.h
- CONFIG_8260 was defined arch/powerpc/cpu/mpc8260/config.mk
We do not need to have both of
Add support for Cortina CS4315/CS4340 10G PHY.
- This driver loads CS43xx firmware to initialize Cortina PHY.
- To define macro CONFIG_PHY_CORTINA will enable this driver.
- Cortina PHY has non-standard offset of PHY ID registers, so
define own get_phy_id function.
Signed-off-by: Shengzhou Liu
In function get_phy_device_by_mask(), when trying Clause 45,
we should extend the value of devad(used in create_phy_by_mask)
to zero to cover more PHYs (e.g. devad must be 0 for CS4315 PHY).
Signed-off-by: Shengzhou Liu shengzhou@freescale.com
---
drivers/net/phy/phy.c | 4 ++--
1 file
README.malta referred to board/malta, but malta has now been moved
within board/imgtec/, so correct the path.
Signed-off-by: James Hogan james.ho...@imgtec.com
Cc: Daniel Schwierzeck daniel.schwierz...@googlemail.com
Cc: Paul Burton paul.bur...@imgtec.com
---
doc/README.malta | 2 +-
1 file
This patch set for use dw mmc controller.
First, add dw mmc controller initialization.
And then, change exynos4 mmc gpio configuration.
Additionally, I have removed exynos4x12_set_mmc_clk function.
Because samsung_get_base_clock() (exynos4x12/ exynos4) return same value.
This patch set is tested
Add DW MMC controller initialization.
Selectively use DW MMC controller instead of SDHCI controller.
Signed-off-by: Beomho Seo beomho@samsung.com
Signed-off-by: Jaehoon Chung jh80.ch...@samsung.com
Cc: Minkyu Kang mk7.k...@samsung.com
---
board/samsung/trats2/trats2.c | 31
For use dwmmc controller, add SDMMC4 gpio configuration.
Signed-off-by: Beomho Seo beomho@samsung.com
Signed-off-by: Jaehoon Chung jh80.ch...@samsung.com
Cc: Minkyu Kang mk7.k...@samsung.com
---
arch/arm/cpu/armv7/exynos/pinmux.c | 20 +++-
1 file changed, 15 insertions(+),
Hi Pavel,
Hi!
Clock Manager driver will be called to reconfigure all the clocks
setting based on user input. The input are passed to Preloader through
handoff files
Signed-off-by: Chin Liang See cl...@altera.com
Cc: Albert Aribaud albert.u.b...@aribaud.net
Cc: Tom Rini tr...@ti.com
Cc:
Remove exynos4x12_set_mmc_clk.
Signed-off-by: Beomho Seo beomho@samsung.com
Signed-off-by: Jaehoon Chung jh80.ch...@samsung.com
Cc: Minkyu Kang mk7.k...@samsung.com
---
arch/arm/cpu/armv7/exynos/clock.c | 29 +
1 file changed, 1 insertion(+), 28 deletions(-)
checkthumb makes sense only for ARM architecture.
Move it to arch/arm/config.mk.
To make sure gcc supports THUMB mode before beginning build,
run checkthumb during archprepare.
Signed-off-by: Masahiro Yamada yamad...@jp.panasonic.com
---
Makefile | 8
arch/arm/config.mk |
checkgcc4 is used only for PowerPC.
Move it to arch/powerpc/config.mk.
To make sure gcc is new enough before beginning build,
run checkgcc4 during archprepare.
Signed-off-by: Masahiro Yamada yamad...@jp.panasonic.com
---
Makefile | 9 -
arch/powerpc/config.mk | 11
Hi Tom,
On Tue, 4 Mar 2014 14:19:47 -0500, Tom Rini tr...@ti.com wrote:
Hey,
The following changes since commit eeb72e67619b98d2502fe634a3a5d9953de92ad0:
Merge branch 'master' of git://git.denx.de/u-boot-arm (2014-02-26 16:49:58
-0500)
are available in the git repository at:
Masahiro Yamada (2):
kbuild: move checkthumb to ARM archprepare
kbuild: move checkgcc4 to PowerPC archprepare
Makefile | 17 -
arch/arm/config.mk | 12 +++-
arch/powerpc/config.mk | 11 ++-
3 files changed, 21 insertions(+), 19
As some PHYs have non-standard PHY ID registers, PHY Id can't
be read correctly by current get_phy_id function, so we enable
get_phy_id redefinable to permit specific PHY driver having own
specific get_phy_id function.
Signed-off-by: Shengzhou Liu shengzhou@freescale.com
---
Hi Beomho,
This patch set for use dw mmc controller.
First, add dw mmc controller initialization.
And then, change exynos4 mmc gpio configuration.
Additionally, I have removed exynos4x12_set_mmc_clk function.
Because samsung_get_base_clock() (exynos4x12/ exynos4) return same
value.
Thank
CROSS_COMPILE is generally passed from the command line
or by the environment variable because cross tools
vary from user to user.
But, having some choices of often used CROSS_COMPILE
seems reasonable.
$(call cc-cross-prefix, ...) returns the first prefix
where a prefix$(CC) is found in PATH.
Hi Masahiro,
CROSS_COMPILE is generally passed from the command line
or by the environment variable because cross tools
vary from user to user.
But, having some choices of often used CROSS_COMPILE
seems reasonable.
$(call cc-cross-prefix, ...) returns the first prefix
where a prefix$(CC)
Hi Detlev,
On Wed, 05 Mar 2014 11:06:03 +0100
Detlev Zundel d...@denx.de wrote:
Hi Masahiro,
CROSS_COMPILE is generally passed from the command line
or by the environment variable because cross tools
vary from user to user.
But, having some choices of often used CROSS_COMPILE
Hi Masahiro,
Hi Detlev,
On Wed, 05 Mar 2014 11:06:03 +0100
Detlev Zundel d...@denx.de wrote:
Hi Masahiro,
CROSS_COMPILE is generally passed from the command line
or by the environment variable because cross tools
vary from user to user.
But, having some choices of often used
On 13/02/2014 08:48, Tim Harvey wrote:
Signed-off-by: Tim Harvey thar...@gateworks.com
Acked-by: Stefano Babic sba...@denx.de
---
Applied to u-boot-imx, thanks !
Best regards,
Stefano Babic
--
=
DENX Software Engineering
On 13/02/2014 08:48, Tim Harvey wrote:
Gateworks Ventana is a product family based on the i.MX6. This
patch adds support for all boards in the Ventana family. Where
possible, data from the boards EEPROM is used to determine various
details about the board at runtime.
Signed-off-by: Tim
On 15/02/2014 17:51, Fabio Estevam wrote:
From: Fabio Estevam fabio.este...@freescale.com
Fix the following sparse warning:
wandboard.c:58:22: warning: symbol 'usdhc1_pads' was not declared. Should it
be static?
Signed-off-by: Fabio Estevam fabio.este...@freescale.com
---
Applied to
On 15/02/2014 17:51, Fabio Estevam wrote:
From: Fabio Estevam fabio.este...@freescale.com
Fixes the following sparse warning:
wandboard.c:137:5: warning: symbol 'board_mmc_init' was not declared. Should
it be static?
Cc: Pantelis Antoniou pa...@antoniou-consulting.com
Signed-off-by:
On 15/02/2014 17:52, Fabio Estevam wrote:
From: Fabio Estevam fabio.este...@freescale.com
Include input.h in order to fix the following sparse warning:
wandboard.c:278:5: warning: symbol 'overwrite_console' was not declared.
Should it be static?
Signed-off-by: Fabio Estevam
On 15/02/2014 17:52, Fabio Estevam wrote:
From: Fabio Estevam fabio.este...@freescale.com
Add a prototype for board_phy_config() to fix the following sparse warning:
wandboard.c:200:5: warning: symbol 'board_phy_config' was not declared.
Should it be static?
Cc: Joe Hershberger
On 15/02/2014 17:52, Fabio Estevam wrote:
From: Fabio Estevam fabio.este...@freescale.com
Add a prototype for board_video_skip() in order to fix the following sparse
warning:
wandboard.c:227:5: warning: symbol 'board_video_skip' was not declared.
Should it be static?
Cc: Anatolij
Hi Tim,
On 05/03/2014 12:06, Stefano Babic wrote:
On 13/02/2014 08:48, Tim Harvey wrote:
Gateworks Ventana is a product family based on the i.MX6. This
patch adds support for all boards in the Ventana family. Where
possible, data from the boards EEPROM is used to determine various
details
On Wed, Mar 05, 2014 at 06:24:24PM +0900, Masahiro Yamada wrote:
CROSS_COMPILE is generally passed from the command line
or by the environment variable because cross tools
vary from user to user.
But, having some choices of often used CROSS_COMPILE
seems reasonable.
$(call
2014-03-05 9:25 GMT+01:00 Masahiro Yamada yamad...@jp.panasonic.com:
All mips32 boards define CONFIG_MIPS32 in config headers
except malta boards which define it in boards.cfg.
We can consolidate them by defining it in
arch/mips/cpu/mips32/config.mk.
CONFIG_MIPS64 definition can be moved to
2014-03-04 15:48 GMT+01:00 James Hogan james.ho...@imgtec.com:
README.malta referred to board/malta, but malta has now been moved
within board/imgtec/, so correct the path.
Signed-off-by: James Hogan james.ho...@imgtec.com
Cc: Daniel Schwierzeck daniel.schwierz...@googlemail.com
Cc: Paul
Hi Stefan,
On 04.03.2014 15:34, Stefan Roese wrote:
As ppc4xx currently only supports the deprecated nand_spl infrastructure
and nobody seems to have time / resources to port this over to the newer
SPL infrastructure, lets remove NAND booting completely.
This should not affect the normal,
Hi All,
I was working with dfu-utill couple of years ago as part of my thesis. My
task was to provide a firmware upgrade mechanism using USB. I had an open
moko so I thought of implementing a solution based on it. The board I used
is SAM9G45 http://www.atmel.com/devices/sam9g45.aspx.
My
For Exynos' pinmux UART implementation there was a possibility to run
for() statement with uninitialized bank, start and count values.
Those warnings appear when following toolchain is used
(gcc-4.8.2-glibc-2.18-binutils-2.24):
warning: 'count' may be used uninitialized in this function
Scan Manager driver will be called to configure the IOCSR
scan chain. This configuration will setup the IO buffer settings
Signed-off-by: Chin Liang See cl...@altera.com
Cc: Dinh Nguyen dingu...@altera.com
Cc: Wolfgang Denk w...@denx.de
CC: Pavel Machek pa...@denx.de
Cc: Tom Rini tr...@ti.com
Cc:
On Tue 2014-03-04 22:13:53, Chin Liang See wrote:
Clock Manager driver will be called to reconfigure all the
clocks setting based on user input. The input are passed to
Preloader through handoff files
Signed-off-by: Chin Liang See cl...@altera.com
Cc: Albert Aribaud
Hi!
Also I expect that you can change all pins for uarts/ethernets/spi/i2c/etc
that's why there is no golden configuration for socfpga that's why
it is better to keep it empty just to compile it.
Well, there are some development boards around... and having u-boot
able to boot on the devel
Hi!
I changed that to if (!scan_chain_engine_is_idle(SCAN_MAX_DELAY))
It should much better now
Yes, thanks.
Removed. Thanks
Thanks for all the changes, it looks better now, so you have my
Acked-by in another thread.
Hi Pavel,
On Mon, 2014-03-03 at 21:41 +0100, ZY - pavel wrote:
Hi!
Scan Manager driver will be called to configure the IOCSR
scan chain. This configuration will setup the IO buffer settings
Signed-off-by: Chin Liang See cl...@altera.com
Cc: Dinh Nguyen dingu...@altera.com
Cc:
Changes:
- randomly generate each partition uuid if undefined
- print info about generated uuid
- save environment on gpt write success
- update doc/README.gpt
Signed-off-by: Przemyslaw Marczak p.marc...@samsung.com
Acked-by: Lukasz Majewski l.majew...@samsung.com
cc: Piotr Wilczek
Changes:
Move functions:
- disk/part_efi.c uuid_string() to lib/uuid.c - uuid_bin_to_str()
- disk/part_efi.c string_uuid() to lib/uuid.c - uuid_str_to_bin()
Update files:
- include/common.h
- disk/part_efi.c
- lib/Makefile
Signed-off-by: Przemyslaw Marczak p.marc...@samsung.com
Acked-by: Lukasz
This patch adds support to generate UUID (Universally Unique Identifier)
in version 4 based on RFC4122, which is randomly.
Source: https://www.ietf.org/rfc/rfc4122.txt
Changes:
- add new config: CONFIG_RANDOM_UUID: compile uuid.c and rand.c
Update files:
- include/common.h
- lib/Makefile
-
This patch adds implementation of function hw_rand() based on exynos
security sub system.
Signed-off-by: Przemyslaw Marczak p.marc...@samsung.com
cc: Akshay Saraswat aksha...@samsung.com
cc: ARUN MANKUZHI aru...@samsung.com
cc: Minkyu Kang mk7.k...@samsung.com
---
Changes v2:
- none
Changes:
- lib/rand.c: add call to hw_rand() (depends on CONFIG_RAND_HW_ACCEL)
- include/common.h: add hw_rand() declaration.
Signed-off-by: Przemyslaw Marczak p.marc...@samsung.com
cc: Michael Walle mich...@walle.cc
cc: Tom Rini tr...@ti.com
---
Changes v2:
- move function hw_rand() from rand()
This allows to use hardware random number generator from exynos
security subsystem.
Signed-off-by: Przemyslaw Marczak p.marc...@samsung.com
Acked-by: Lukasz Majewski l.majew...@samsung.com
cc: Piotr Wilczek p.wilc...@samsung.com
cc: Minkyu Kang mk7.k...@samsung.com
---
Changes v2:
- none
Hey all,
I'm looking over some patches for am43xx to enable the case of non-SPL
XIP booting and this means we start getting code that's shared with
am335x that looks like:
#if defined(CONFIG_SPL_BUILD) || defined(CONFIG_NOR_BOOT) || \
defined(CONFIG_QSPI_BOOT)
...
#endif
Because we need
On Mon, 2014-03-03 at 18:03 -0600, Scott Wood wrote:
On Fri, 2014-02-21 at 14:51 -0600, Chin Liang See wrote:
To add the Denali NAND driver support into U-Boot. It required
information such as register base address from configuration
header file within include/configs folder.
On Mon, 2014-03-03 at 20:24 -0600, Scott Wood wrote:
On Thu, Feb 27, 2014 at 11:05:06AM -0600, Chin Liang See wrote:
To add the Denali NAND driver support into U-Boot. It required
information such as register base address from configuration
header file within include/configs folder.
Hi Masahiro,
On Tue, 2014-03-04 at 19:31 +0900, Masahiro Yamada wrote:
Hello Scott, Chin,
+/* this is a helper macro that allows us to
+ * format the bank into the proper bits for the controller */
+#define BANK(x) ((x) 24)
+
+/* Interrupts are cleared by writing a 1 to the
On Tue, 2014-03-04 at 23:30 -0600, Bansal Aneesh-B39320 wrote:
Yes, in case of secure boot from NAND, the DRAM is initialized by the BootROM
and complete u-boot image is copied from NAND to DRAM by the BootROM.
So, it should be called RAMBOOT.
DRAM or SRAM? Having ROM initialize DDR is a bit
To add the Denali NAND driver support into U-Boot. It required
information such as register base address from configuration
header file within include/configs folder.
Signed-off-by: Chin Liang See cl...@altera.com
Cc: Artem Bityutskiy artem.bityuts...@linux.intel.com
Cc: David Woodhouse
On Wed, 2014-03-05 at 17:15 +0100, ZY - pavel wrote:
Hi!
I changed that to if (!scan_chain_engine_is_idle(SCAN_MAX_DELAY))
It should much better now
Yes, thanks.
Removed. Thanks
Thanks for all the changes, it looks better now, so you have my
Acked-by in another thread.
Thanks
On Wed, 2014-03-05 at 11:34 -0600, Chin Liang See wrote:
On Mon, 2014-03-03 at 18:03 -0600, Scott Wood wrote:
On Fri, 2014-02-21 at 14:51 -0600, Chin Liang See wrote:
To add the Denali NAND driver support into U-Boot. It required
information such as register base address from
From: Fabio Estevam fabio.este...@freescale.com
Allow the boot of a device tree mainline kernel by aligning the environment
variables with other FSL boards.
Tested NFS boot of a dt 3.14-rc5 kernel.
Signed-off-by: Fabio Estevam fabio.este...@freescale.com
---
include/configs/mx25pdk.h | 103
On Wed, Mar 5, 2014 at 3:51 PM, Fabio Estevam feste...@gmail.com wrote:
From: Fabio Estevam fabio.este...@freescale.com
Allow the boot of a device tree mainline kernel by aligning the environment
variables with other FSL boards.
Tested NFS boot of a dt 3.14-rc5 kernel.
Signed-off-by: Fabio
Hi Pavel,
2014-03-05 17:13 GMT+01:00 Pavel Machek pa...@denx.de:
Hi!
Also I expect that you can change all pins for
uarts/ethernets/spi/i2c/etc
that's why there is no golden configuration for socfpga that's why
it is better to keep it empty just to compile it.
Well, there are some
Fix the function annotations in aes.h so they're compatible with kerneldoc.
Signed-off-by: Marek Vasut ma...@denx.de
---
include/aes.h | 22 --
1 file changed, 12 insertions(+), 10 deletions(-)
diff --git a/include/aes.h b/include/aes.h
index ea06308..c70eda6 100644
---
Add simple 'aes' command, which allows using the AES-128-CBC encryption
and decryption functions from U-Boot command line.
Signed-off-by: Marek Vasut ma...@denx.de
---
README | 1 +
common/Makefile | 1 +
common/cmd_aes.c | 89
Move the AES-128-CBC encryption function implemented in tegra20-common/crypto.c
into lib/aes.c . This is well re-usable common code. Moreover, clean the code up
a bit and fix the kerneldoc-style annotations.
Signed-off-by: Marek Vasut ma...@denx.de
---
arch/arm/cpu/tegra20-common/crypto.c | 72
Implement support for encrypting/decrypting the environment block
into the tools/env/fw_* tools. The cipher used is AES 128 CBC and
the implementation depends solely on components internal to U-Boot.
To allow building against the internal AES library, the library did
need minor adjustments to not
Implement env_export() wrapper, so that all implementers of saveenv() don't
have to call hexport_r(), crc32() etc. sequence . This trims down a bit of
code duplication.
Signed-off-by: Marek Vasut ma...@denx.de
---
common/env_common.c| 17 +
common/env_dataflash.c | 17
Add function which allows encrypting the whole environment block with
AES-128-CBC. The key for the environment is retrieved by env_aes_cbc_get_key()
function, which must be implemented on a per-board basis.
Signed-off-by: Marek Vasut ma...@denx.de
---
common/env_common.c | 62
On Wed, 2014-03-05 at 19:47 +0100, Michal Simek wrote:
Hi Pavel,
2014-03-05 17:13 GMT+01:00 Pavel Machek pa...@denx.de:
Hi!
Also I expect that you can change all pins for
uarts/ethernets/spi/i2c/etc
that's why there is no golden configuration
When using HAB, there are additional special requirements on the placement of
U-Boot and the U-Boot SPL in memory. To fullfill these, this patch moves the
U-Boot binary a little further from the begining of the DRAM, so the HAB CST
and IVT can be placed in front of the U-Boot binary. This is
This patch adds the groundwork for generating signed BootStream, which
can be used by the HAB library in i.MX28. We are adding a new target,
u-boot-signed.sb , since the process for generating regular non-signed
BootStream is much easier. Moreover, the signed bootstream depends on
external
On Sunday, February 16, 2014 at 12:30:54 AM, Simon Glass wrote:
Hi Marek,
On 5 February 2014 20:44, Marek Vasut ma...@denx.de wrote:
Move the AES-128-CBC encryption function implemented in
tegra20-common/crypto.c into lib/aes.c . This is well re-usable common
code. Moreover, clean the
On Sunday, February 16, 2014 at 12:31:53 AM, Simon Glass wrote:
Hi Marek,
On 5 February 2014 20:47, Marek Vasut ma...@denx.de wrote:
Add support for sha256,rsa2048 signature. This patch utilises the
previously laid groundwork for adding other hashes.
Signed-off-by: Marek Vasut
Implement a compatible AES-128-CBC decryption function as a counterpart
of the encryption function pulled from tegra20-common/crypto.c .
Signed-off-by: Marek Vasut ma...@denx.de
---
include/aes.h | 10 ++
lib/aes.c | 28
2 files changed, 38 insertions(+)
Since we are slowly heading toward a single u-boot for quad/duallite,
can we find a solution to this now.
mx6sabre_common.h: fdt_file= CONFIG_DEFAULT_FDT_FILE \0 \
mx6sabresd.h:#define CONFIG_DEFAULT_FDT_FILEimx6q-sabresd.dtb
mx6sabresd.h:#define CONFIG_DEFAULT_FDT_FILE
On Wed, Mar 5, 2014 at 4:30 PM, Troy Kisky
troy.ki...@boundarydevices.com wrote:
Since we are slowly heading toward a single u-boot for quad/duallite,
can we find a solution to this now.
mx6sabre_common.h: fdt_file= CONFIG_DEFAULT_FDT_FILE \0 \
mx6sabresd.h:#define
The s_init function is only called on SPL or XIP cases, so lets only
build it for them. This makes the #if logic within the function a bit
clearer as to when we are or are not calling things, and makes it easier
to see that for example preloader_console_init isn't ever called in the
non-XIP full
On Tue, Mar 04, 2014 at 08:09:19PM -0600, Scott Wood wrote:
The following changes since commit eeb72e67619b98d2502fe634a3a5d9953de92ad0:
Merge branch 'master' of git://git.denx.de/u-boot-arm (2014-02-26 16:49:58
-0500)
are available in the git repository at:
On Wed, Mar 05, 2014 at 05:57:46PM +0100, Przemyslaw Marczak wrote:
Changes:
- lib/rand.c: add call to hw_rand() (depends on CONFIG_RAND_HW_ACCEL)
- include/common.h: add hw_rand() declaration.
Signed-off-by: Przemyslaw Marczak p.marc...@samsung.com
cc: Michael Walle mich...@walle.cc
cc:
Hello,
My platform is a dra7xx_evm. My code baseline is denx master
I am trying to write to the pcf8575 i2c gpio expander at address 0x21 (bit P4)
I can read 16-bit okay in this version, but 16-bit writing is not working.
// Display current values
i2c md 21 0.0 2
: f7 eb..
// Set bit
On Wed, Mar 05, 2014 at 19:27 +0900, Masahiro Yamada wrote:
If you like, you can still pass CROSS_COMPILE from the command line
or by the environment variable.
ifeq ($(CROSS_COMPILE),)
CROSS_COMPILE := $(call cc-cross-prefix, arm-linux- arm-linux-gnueabi-)
endif
$(call
On Wed, 2014-03-05 at 12:23 -0600, Scott Wood wrote:
On Wed, 2014-03-05 at 11:34 -0600, Chin Liang See wrote:
On Mon, 2014-03-03 at 18:03 -0600, Scott Wood wrote:
On Fri, 2014-02-21 at 14:51 -0600, Chin Liang See wrote:
To add the Denali NAND driver support into U-Boot. It required
On Wed, 2014-03-05 at 17:01 -0600, Chin Liang See wrote:
On Wed, 2014-03-05 at 12:23 -0600, Scott Wood wrote:
On Wed, 2014-03-05 at 11:34 -0600, Chin Liang See wrote:
On Mon, 2014-03-03 at 18:03 -0600, Scott Wood wrote:
On Fri, 2014-02-21 at 14:51 -0600, Chin Liang See wrote:
Why
On Wed, 2014-03-05 at 17:04 -0600, Scott Wood wrote:
On Wed, 2014-03-05 at 17:01 -0600, Chin Liang See wrote:
On Wed, 2014-03-05 at 12:23 -0600, Scott Wood wrote:
On Wed, 2014-03-05 at 11:34 -0600, Chin Liang See wrote:
On Mon, 2014-03-03 at 18:03 -0600, Scott Wood wrote:
On Fri,
On Wed, 2014-03-05 at 17:09 -0600, Chin Liang See wrote:
On Wed, 2014-03-05 at 17:04 -0600, Scott Wood wrote:
On Wed, 2014-03-05 at 17:01 -0600, Chin Liang See wrote:
On Wed, 2014-03-05 at 12:23 -0600, Scott Wood wrote:
On Wed, 2014-03-05 at 11:34 -0600, Chin Liang See wrote:
On
On Wed, 2014-03-05 at 17:11 -0600, Scott Wood wrote:
On Wed, 2014-03-05 at 17:09 -0600, Chin Liang See wrote:
On Wed, 2014-03-05 at 17:04 -0600, Scott Wood wrote:
On Wed, 2014-03-05 at 17:01 -0600, Chin Liang See wrote:
On Wed, 2014-03-05 at 12:23 -0600, Scott Wood wrote:
On Wed,
Hi,
I'm working with an OMAP3503 processor with a NAND chip attached via
the GPMC interface. The NAND chip required at least 4-bit ECC outside
of the first block. Currently, I write the MLO and u-boot.img files
from u-boot using 1-bit hardware ECC (i.e. nandecc hw) to NAND and
boot the board.
Add yet another OCOTP driver for this i.MX family. This time, it's a driver for
the OCOTP variant found in the i.MX23 and i.MX28. This version of OCOTP is too
different from the i.MX6 one that I could not use the mxc_ocotp.c driver without
making it into a big pile of #ifdef . This driver
Like many platforms, the Altera socfpga platform requires that the
preloader be signed in a certain way or the built-in boot ROM will
not boot the code.
This change automatically creates an appropriately signed preloader
from an SPL image.
The signed image includes a CRC which must, of course,
On 03/05/2014 06:21 PM, Lukasz Majewski wrote:
Hi Beomho,
This patch set for use dw mmc controller.
First, add dw mmc controller initialization.
And then, change exynos4 mmc gpio configuration.
Additionally, I have removed exynos4x12_set_mmc_clk function.
Because samsung_get_base_clock()
Hello Tom,
unsigned int rand_r(unsigned int *seedp)
{
+#ifdef CONFIG_RAND_HW_ACCEL
+ return hw_rand();
+#endif
*seedp ^= (*seedp 13);
*seedp ^= (*seedp 17);
*seedp ^= (*seedp 5);
This doesn't already generate warnings about unreachable code?
I hate to say
On 03/06/2014 01:57 AM, Przemyslaw Marczak wrote:
This patch adds implementation of function hw_rand() based on exynos
security sub system.
Signed-off-by: Przemyslaw Marczak p.marc...@samsung.com
cc: Akshay Saraswat aksha...@samsung.com
cc: ARUN MANKUZHI aru...@samsung.com
cc: Minkyu Kang
BR boards are using Phy Addresses 'one' and 'two', prior this was
defined through #define PHYADDR 1 within a header file.
Now this is addresses are given with device-driver structure.
Signed-off-by: Hannes Petermaier oe5...@oevsv.at
---
board/BuR/common/common.c |4 ++--
1 file changed, 2
Hello,
I am trying to perform secure booting on nitrogen 6X SOM using
u-boot 2013. I tried to pad and sign the u-boot.imx image for
authentication.But the size of both u-boot.imx as well as
u-boot-signed-padded.imx remains same. Technically signed and padded image
should have more size
Commit 54e458de deleted qi_lb60 board support
because of the incompatible license issue.
There is no board with XBurst CPU.
Signed-off-by: Masahiro Yamada yamad...@jp.panasonic.com
Cc: Daniel Schwierzeck daniel.schwierz...@gmail.com
Cc: Tom Rini tr...@ti.com
---
README
On 28/02/14 23:30, Przemyslaw Marczak wrote:
This patch removes type static from those functions declaration.
Now it can be used outside.
outside where?
I think there's no reason to make them to non-static function.
If you want to use it at outside then please send the patch together.
On 05/03/14 10:57, Beomho Seo wrote:
For use dwmmc controller, add SDMMC4 gpio configuration.
Signed-off-by: Beomho Seo beomho@samsung.com
Signed-off-by: Jaehoon Chung jh80.ch...@samsung.com
Cc: Minkyu Kang mk7.k...@samsung.com
---
arch/arm/cpu/armv7/exynos/pinmux.c | 20
On 05/03/14 10:57, Beomho Seo wrote:
Add DW MMC controller initialization.
Selectively use DW MMC controller instead of SDHCI controller.
Signed-off-by: Beomho Seo beomho@samsung.com
Signed-off-by: Jaehoon Chung jh80.ch...@samsung.com
Cc: Minkyu Kang mk7.k...@samsung.com
---
On 05/03/14 10:57, Beomho Seo wrote:
Remove exynos4x12_set_mmc_clk.
Please describe here why you remove it.
Signed-off-by: Beomho Seo beomho@samsung.com
Signed-off-by: Jaehoon Chung jh80.ch...@samsung.com
Cc: Minkyu Kang mk7.k...@samsung.com
---
arch/arm/cpu/armv7/exynos/clock.c |
On 03/06/2014 03:58 PM, Minkyu Kang wrote:
On 05/03/14 10:57, Beomho Seo wrote:
For use dwmmc controller, add SDMMC4 gpio configuration.
Signed-off-by: Beomho Seo beomho@samsung.com
Signed-off-by: Jaehoon Chung jh80.ch...@samsung.com
Cc: Minkyu Kang mk7.k...@samsung.com
---
1 - 100 of 101 matches
Mail list logo
