Dear Masahiro,
In message 20140324145814.b35f.aa925...@jp.panasonic.com you wrote:
You are suggesting a better idea below.
We should not treat SPL as a special case.
In my opinion, CONFIG_SPL_* should be discontinued.
For example, we can merge CONFIG_SPL_TEXT_BASE
to
Hello Minkyu,
On 03/22/2014 04:18 PM, Minkyu Kang wrote:
Dear Przemyslaw Marczak,
On 21 March 2014 17:56, Przemyslaw Marczak p.marc...@samsung.com wrote:
Signed-off-by: Przemyslaw Marczak p.marc...@samsung.com
Cc: Minkyu Kang mk7.k...@samsung.com
---
Changes v3:
- new commit - after
MDIO clock needs to be initialized in u-boot code for SoCs
having FMAN-v3(v3H or v3L) controller due to below reasons
-On SoCs that have FMAN-v3H like B4860, default value of
MDIO_CLK_DIV bits in mdio_stat(mdio_cfg) register generates
mdio clock too high (much higher than 2.5MHz), violating the
MMC switch command for unsupported feature (e.g. bus width) sets a switch
error bit in card status. This bit should be checked, and, if it's set,
no access with new controller settings should be performed.
Signed-off-by: Andrew Gabbasov andrew_gabba...@mentor.com
---
drivers/mmc/mmc.c |4
Hi Wolfgang,
On Mon, 24 Mar 2014 08:30:56 +0100
Wolfgang Denk w...@denx.de wrote:
Dear Masahiro,
In message 20140324145814.b35f.aa925...@jp.panasonic.com you wrote:
You are suggesting a better idea below.
We should not treat SPL as a special case.
In my opinion, CONFIG_SPL_*
Calculation of the timeout value should be based on actual clock value,
written to controller registers. Since mmc-tran_speed is either the
maximum allowed speed, or the preliminary value, that is be not yet
set to registers, the actual timeout, taken by the controller, based
on its clock
The controller reset is performed now if command error occurs.
This commit adds the reset for the case of data related errors too.
Signed-off-by: Andrew Gabbasov andrew_gabba...@mentor.com
---
drivers/mmc/fsl_esdhc.c | 63 +++
1 file changed, 36
On Mon, 2014-03-24 at 01:14 +0100, Henrik Nordström wrote:
fre 2014-03-21 klockan 21:54 + skrev Ian Campbell:
I've tried to give corect credit and S-o-b based upon:
git log --pretty='%aN' linux-sunxi/sunxi -- [PATHS] | sort -u
git log linux-sunxi/sunxi -- [PATHS] | grep -i
Hi Wolfgang,
I notice an issues with out of tree builds in current top of tree
code: make O=${SOMEDIR} distclean leaves files around:
- rm -fr ${SOMEDIR}
- mkdir -p ${SOMEDIR}
- make -s O=${SOMEDIR} TQM5200S_config
Configuring for TQM5200S - Board: TQM5200,
On Mon, Mar 24, 2014 at 9:31 AM, S Durga Prasad Paladugu
durgaprasad.p...@gmail.com wrote:
Hi,
I have a below query on u-boot bootup.
When UBOOT does not detect NOR flash during bootup it throws up an error
message that indicates that uboot did not detect NOR flash and stops
there.
But
Hi!
.cmd files should not be version-controlled.
Signed-off-by: Pavel Machek pa...@denx.de
diff --git a/.gitignore b/.gitignore
index a163728..77fb2c8 100644
--- a/.gitignore
+++ b/.gitignore
@@ -15,6 +15,7 @@
*.swp
*.patch
*.bin
+*.cmd
# Build tree
Hey all,
*ping*
On 10/21/2013 09:44 PM, Wolfgang Denk wrote:
Dear Scott Wood,
In message 1382138723.7979.928.ca...@snotra.buserror.net you wrote:
And the one 64-bit environment that we're about to have in U-Boot
(armv8) has discontiguous memory, which is another case where
get_ram_size()
Hi Tom,
The following changes since commit 2c072c958bb544c72f0e848375803dbd6971f022:
sandbox: config: Enable cros_ec emulation and related items (2014-03-17
20:05:50 -0600)
are available in the git repository at:
git://git.denx.de/u-boot-mmc.git master
for you to fetch changes up to
With 32 milliseconds delay on some boards EEMPROM got written inconsistently.
With 64 msec all of our existig boards show properly written EEPROM.
Cc: Tom Rini tr...@ti.com
Signed-off-by: Alexey Brodkin abrod...@synopsys.com
---
include/configs/axs101.h | 2 +-
1 file changed, 1 insertion(+), 1
From: Shaohui Xie shaohui@freescale.com
Also, remove workaround of rev1.0.
Signed-off-by: Shaohui Xie shaohui@freescale.com
---
board/freescale/t4qds/t4_pbi.cfg | 14 --
board/freescale/t4qds/t4_rcw.cfg | 4 ++--
2 files changed, 2 insertions(+), 16 deletions(-)
diff --git
Hi Mashiro,
On Wed, 2014-03-19 at 20:26 +0900, Masahiro Yamada wrote:
Hi Chin,
--- /dev/null
+++ b/drivers/mtd/nand/denali.c
@@ -0,0 +1,1132 @@
+/*
+ * Copyright (C) 2013-2014 Altera Corporation www.altera.com
+ * Copyright (C) 2009-2010, Intel Corporation and its suppliers.
+
Hi Michal,
On Wed, 2014-03-12 at 15:54 +0100, Michal Simek wrote:
On 03/12/2014 03:45 PM, Chin Liang See wrote:
Hi guys,
Any ACK or further comments?
I still have a comment that you should at least rename your socfpga board name
to something better because currently it is more
Hi Michal,
On Wed, 2014-03-12 at 15:57 +0100, Michal Simek wrote:
On 03/05/2014 05:05 PM, Chin Liang See wrote:
Scan Manager driver will be called to configure the IOCSR
scan chain. This configuration will setup the IO buffer settings
Signed-off-by: Chin Liang See cl...@altera.com
A large chunk of U-Boot's executable size is the code to process and
execute commands. This is reasonable, since commands and scripts are
an important part of U-Boot's feature set and provide much of its
flexibility.
However, for some applications only a very limited set of commands is
required.
Add a simple board_run_command() function for sandbox. It does nothing
except print the command that would be executed. This can be extended
to perform actual tasks.
Signed-off-by: Simon Glass s...@chromium.org
---
board/sandbox/sandbox/sandbox.c | 10 ++
1 file changed, 10
A large chunk of the U-Boot code is the command line. For some applications
this is not needed, since the boot can be controlled by a board-specific
hard-coded boot procedure. This saves a significant amount of space.
This makes U-Boot proper look a little more like SPL in terms of size.
It would be better to split common/main.c into a few chunks: readline, the
standard parser and the real main. However such a change is fairly invasive.
For now, use #ifdef to remove the unwanted code.
This helps to reduce the image size by removing unwanted code.
Signed-off-by: Simon Glass
At present when this option is not defined, we do not process the FDT
options - for example we do not run the boot command specified by the FDT.
Move this code into the common function and make sure it is always called
when CONFIG_OF_CONTROL is defined.
Signed-off-by: Simon Glass
Commands are declared entirely within a macro, like this:
U_BOOT_CMD(...);
Sub-commands are not the same. At present the U_BOOT_CMD_MKENT() macro is
used within an array declaration, but the array itself is not handled by
macros. We have this:
static cmd_tbl_t table[] = {
In cmd_bootm.c the function pointer is misused as a flags word. It is better
to add a flag word to each command, so that bootm can avoid this hack.
To avoid increasing the size of the U-Boot binary, we can re-use the existing
'repeatable' flag, which only needs a single bit.
Signed-off-by: Simon
The reason for this change is to be able to use the ARM Trusted Firmware
(ATF) to load the various ATF images, plus u-boot, which can then load
the kernel/ramdisk/dtb with calls to an external host from a standard
fastmodel armv8 board file using semihosting, and then launch the kernel
without a
Hi I am working on a project with cubie2 boards loading linux (Patricks nand
boot loader patch, and kernel 3.3.0+ and ubuntu linaro 13.04 distro). I have
met with stability issues (lock-up) and as I dug deeper, a number of other
people have also complained about lockup issue relating to high
2014-03-24 7:35 GMT+01:00 Masahiro Yamada yamad...@jp.panasonic.com:
Thanks for your effort. I think basicly we're going to the right direction.
But I am afraind more careful check is necessary before posting the
series.
I did build test on your patches on kconfig-support branch.
I noticed
On Friday, March 21, 2014 at 10:54:25 PM, Ian Campbell wrote:
As well as the following signed-off-by the sunxi branch shows commits to
these files authored by the following:
Stefan Roese
Tom Cubie
yemao
Signed-off-by: Henrik Nordstrom hen...@henriknordstrom.net
Signed-off-by: Luke
On Friday, March 21, 2014 at 10:54:19 PM, Ian Campbell wrote:
[...]
diff --git a/arch/arm/cpu/armv7/sunxi/pinmux.c
b/arch/arm/cpu/armv7/sunxi/pinmux.c new file mode 100644
index 000..8f5cbfe
--- /dev/null
+++ b/arch/arm/cpu/armv7/sunxi/pinmux.c
@@ -0,0 +1,80 @@
+/*
+ * (C) Copyright
On Friday, March 21, 2014 at 10:54:18 PM, Ian Campbell wrote:
This has been stripped back for mainlining and supports only sun7i. These
changes are not useful by themselves but are split out to make the patch
sizes more manageable.
[...]
+int clock_init(void)
+{
+ struct sunxi_ccm_reg
On Friday, March 21, 2014 at 10:54:22 PM, Ian Campbell wrote:
This has been stripped back for mainlining and supports only sun7i booting
via FEL mode. These changes are not useful by themselves but are split out
to make the patch sizes more manageable.
As well as the following signed-off-by
+Tom
On 23 March 2014 22:55, Masahiro Yamada yamad...@jp.panasonic.com wrote:
Prior to Kbuild, the build system created a build directory,
when it did not exist, for out-of-tree build.
This feature was dropped when we switched to Kbuild
because many of lines in makefiles were copied from
On Monday, March 24, 2014 at 11:42:17 PM, Olliver Schinagl wrote:
On 03/24/2014 09:52 PM, Marek Vasut wrote:
On Friday, March 21, 2014 at 10:54:18 PM, Ian Campbell wrote:
This has been stripped back for mainlining and supports only sun7i.
These changes are not useful by themselves but are
On 24/03/14 16:44, Przemyslaw Marczak wrote:
Hello Minkyu,
On 03/22/2014 04:18 PM, Minkyu Kang wrote:
Dear Przemyslaw Marczak,
On 21 March 2014 17:56, Przemyslaw Marczak p.marc...@samsung.com wrote:
Signed-off-by: Przemyslaw Marczak p.marc...@samsung.com
Cc: Minkyu Kang
Applied, thanks!
Best regards,
Nobuhiro
2014-03-17 23:14 GMT+09:00 Baruch Siach bar...@tkos.co.il:
All pins should be output.
Signed-off-by: Baruch Siach bar...@tkos.co.il
---
board/renesas/ecovec/ecovec.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git
Applied, thanks!
Best regards,
Nobuhiro
2014-03-17 23:14 GMT+09:00 Baruch Siach bar...@tkos.co.il:
Enable USB0 clock by resetting bit 20 of MSTPCR2. Leave other bits unchanged.
Signed-off-by: Baruch Siach bar...@tkos.co.il
---
board/renesas/ecovec/ecovec.c | 2 +-
1 file changed, 1
On 26 January 2014 20:48, Andreas Färber afaer...@suse.de wrote:
Avoids could not find output section .gnu.hash ld.bfd errors on openSUSE.
Cc: Albert Aribaud albert.u.b...@aribaud.net
Cc: Tom Rini tr...@ti.com
Signed-off-by: Andreas Färber afaer...@suse.de
Acked-by: Simon Glass
On 21 March 2014 11:28, Stephen Warren swar...@wwwdotorg.org wrote:
From: Stephen Warren swar...@nvidia.com
Tegra's APB misc register region contains various miscellaneous
registers and the Tegra pinmux registers. Some code that touches the
misc registers currently uses struct pmux_tri_ctlr,
Hi Stephen,
On 21 March 2014 11:28, Stephen Warren swar...@wwwdotorg.org wrote:
From: Stephen Warren swar...@nvidia.com
Much of arch/arm/cpu/tegra*-common/pinmux.c is identical. Remove the
duplication by creating pinmux-common.c for all the identical code.
This leaves:
*
On 21 March 2014 11:28, Stephen Warren swar...@wwwdotorg.org wrote:
From: Stephen Warren swar...@nvidia.com
Clean up the naming of pinmux-related objects:
* Refer to drive groups rather than pad groups to match the Linux kernel.
* Ensure all pinmux API types are prefixed with pmux_, values
Hi Stephen,
On 21 March 2014 11:28, Stephen Warren swar...@wwwdotorg.org wrote:
From: Stephen Warren swar...@nvidia.com
This removes a bunch of open-coded register IO, masking, and shifting.
I would have squashed this into ARM: tegra: pinctrl: remove duplication
except that keeping it a
Hi Stephen,
On 21 March 2014 11:28, Stephen Warren swar...@wwwdotorg.org wrote:
From: Stephen Warren swar...@nvidia.com
This renames all the Tegra20 pinmux pins and functions so they have a
prefix which matches the type name.
The entries in tegra20_pingroups[] are all updated to remove the
On 21 March 2014 11:28, Stephen Warren swar...@wwwdotorg.org wrote:
From: Stephen Warren swar...@nvidia.com
This renames all the pinmux pins, drive groups, and functions so they
have a prefix which matches the type name. These lists are also auto-
generated using scripts that were also used
Hi Stephen,
On 21 March 2014 14:58, Stephen Warren swar...@wwwdotorg.org wrote:
From: Stephen Warren swar...@nvidia.com
Use smaller fields in the Tegra pinmux structures in order to pack the
data tables into a smaller space. This saves around 1-3KB for the SPL
and around 3-8KB for the main
Hi Rajeshwari,
I recall you mentioning that this patch has not made it to mainline
yet. Do you know who is working on it please?
Regards,
Simon
___
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
On 03/24/2014 09:52 PM, Marek Vasut wrote:
On Friday, March 21, 2014 at 10:54:18 PM, Ian Campbell wrote:
This has been stripped back for mainlining and supports only sun7i. These
changes are not useful by themselves but are split out to make the patch
sizes more manageable.
[...]
+int
47 matches
Mail list logo
