Signed-off-by: Teddy Reed
---
tools/mkimage.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/tools/mkimage.c b/tools/mkimage.c
index ff3024a..0e501f8 100644
--- a/tools/mkimage.c
+++ b/tools/mkimage.c
@@ -225,6 +225,7 @@ static void process_args(int argc, char **argv)
hi Andreas,
Thanks for your catch. I will revise the typos.
On 2016年07月12日 12:30, Andreas Färber wrote:
Am 12.07.2016 um 05:18 schrieb Ziyuan Xu:
From: Xu Ziyuan
If we would like to boot from SD card, we have to implement mmc driver
in SPL stage, and get a slightly
> -Original Message-
> From: U-Boot [mailto:u-boot-boun...@lists.denx.de] On Behalf Of Yunhui Cui
> Sent: Tuesday, July 12, 2016 8:20 AM
> To: york sun
> Cc: Yunhui Cui ; u-boot@lists.denx.de
> Subject: [U-Boot] [PATCH v3] driver: spi: fsl-qspi:
Hi Simon,
On Tue, Jun 28, 2016 at 9:44 PM, Stefan Roese wrote:
> This patch adds support for the SMBus block read/write functionality.
> Other protocols like the SMBus quick command need to get added
> if this is needed.
>
> This patch also removed the SMBus related defines from
On Tue, Jun 28, 2016 at 9:45 PM, Stefan Roese wrote:
> This patch includes the following changes:
>
> - Remove Designware I2C support from dts as its not used
> - Configure SMBus PADs in dts
> - Enable I2C commands and I2C support
> - Configure SMSC2513 USB hub via SMBus upon
On Mon, Jul 11, 2016 at 11:30 PM, Simon Glass wrote:
> With the change to set up pinctrl after relocation, link fails to boot. Add
> a special case in the link code to handle this.
>
> Fixes: d8906c1f (x86: Probe pinctrl driver in cpu_init_r())
>
> Signed-off-by: Simon Glass
On Mon, Jul 11, 2016 at 09:12:27AM +0200, Maxime Ripard wrote:
> On Wed, Jul 06, 2016 at 11:22:48AM +1000, David Gibson wrote:
> > On Tue, Jul 05, 2016 at 10:26:42AM +0200, Maxime Ripard wrote:
> > > Add a function to retrieve a writeable property only by the first
> > > characters of its name.
>
Am 12.07.2016 um 05:18 schrieb Ziyuan Xu:
> From: Xu Ziyuan
>
> If we would like to boot from SD card, we have to implement mmc driver
> in SPL stage, and get a slightly large SPL binrary. Rockchip SoC's
"binary"
> bootrom code has the ability to load spl and u-boot,
From: Yunhui Cui
Warnins log:
drivers/spi/fsl_qspi.c: In function ‘qspi_ahb_read’:
drivers/spi/fsl_qspi.c:400:16: warning: cast to pointer from integer of
different size [-Wint-to-pointer-cast]
memcpy(rxbuf, (u8 *)(priv->cur_amba_base + priv->sf_addr), len);
We do so for the EFI binary already and it aids debugging.
Cc: Alexander Graf
Signed-off-by: Andreas Färber
---
include/config_distro_bootcmd.h | 4
1 file changed, 4 insertions(+)
diff --git a/include/config_distro_bootcmd.h
On arm64 Linux device trees are organized by SoC vendor. Therefore we
need to search the vendor subdirectory as well.
Since the SoC vendor may be different from ${vendor}, introduce a new
${soc_vendor}. If this is not set, the behavior remains unchanged.
Cc: Alexander Graf
Hi,
This series modifies the distro boot scripts to better cope with real-world
.dtb scenarios. In particular openSUSE images have the EFI GRUB2 and optional
.dtb files on separate partitions (fat vs. ext4) and installed to /boot/dtb-foo
symlink, which may be /dtb or /boot/dtb for U-Boot. The
Signed-off-by: Andreas Färber
---
include/configs/dragonboard410c.h | 1 +
1 file changed, 1 insertion(+)
diff --git a/include/configs/dragonboard410c.h
b/include/configs/dragonboard410c.h
index 74a827d..8b019e9 100644
--- a/include/configs/dragonboard410c.h
+++
A UEFI setup will typically have an EFI FAT partition, but device trees
are more likely to be located on, e.g., Linux volumes. By convention the
EFI partition will usually be placed first, so that we would find the
EFI removable media binary and enter it without device tree from disk.
Therefore
Just like boot configs or scripts, .dtb files may be in /boot.
Search $efi_dtb_prefixes for all $boot_prefixes.
Cc: Alexander Graf
Signed-off-by: Andreas Färber
---
include/config_distro_bootcmd.h | 24 +++-
1 file changed, 15 insertions(+),
Fix a macro line break whose alignment slipped in commit fba5f93.
Be consistent in having trailing spaces after semicolon.
While at it, drop a duplicate white line.
Cc: Alexander Graf
Signed-off-by: Andreas Färber
---
include/config_distro_bootcmd.h | 11
From: Xu Ziyuan
If we would like to boot from SD card, we have to implement mmc driver
in SPL stage, and get a slightly large SPL binrary. Rockchip SoC's
bootrom code has the ability to load spl and u-boot, then boot.
If CONFIG_ROCKCHIP_SPL_BACK_TO_BROM is enabled, the
As part of the startup process for boards using the SPL, the
meaning of board_init_f changed such that it should return normally
rather than calling board_init_r directly.
(see db910353a126d84fe8dff7a694ea792f50fcfb6a)
This was fixed in 32-bit arm, but broke when SPL was added to
64 bit arm. This
From: Yunhui Cui
Errata: A-009282: QuadSPI data pre-fetch can result in incorrect data
We need this errata workaround when CONFIG_SYS_FSL_QSPI_AHB is enabled.
Signed-off-by: Yunhui Cui
---
drivers/spi/fsl_qspi.c | 12 +++-
1 file changed, 11
On 07/11, 2016, 11:17 PM, York Wrote:
> On 07/11/2016 12:49 AM, Yunhui Cui wrote:
> > From: Yunhui Cui
> >
> > Errata: A-009282: QuadSPI data pre-fetch can result in incorrect data
> >
> > Signed-off-by: Yunhui Cui
> > ---
> > drivers/spi/fsl_qspi.c |
Hi,
On Jul 11, 2016 20:06, "Ziyuan Xu" wrote:
>
> hi Simon,
>
>
> On 2016年07月12日 07:29, Simon Glass wrote:
>>
>> Hi Ziyuan,
>>
>> On 27 June 2016 at 02:30, Ziyuan Xu wrote:
>>>
>>> From: Xu Ziyuan
>>>
>>> If we would like to
Hi Simon,
CC Doug for this topic.
On 07/12/2016 07:54 AM, Simon Glass wrote:
Hi Kever,
On 11 July 2016 at 00:58, Kever Yang wrote:
Hi Simon,
On 07/09/2016 10:39 PM, Simon Glass wrote:
Hi Kever,
On 7 July 2016 at 20:45, Kever Yang
hi Simon,
On 2016年07月12日 07:29, Simon Glass wrote:
Hi Ziyuan,
On 27 June 2016 at 02:30, Ziyuan Xu wrote:
From: Xu Ziyuan
If we would like to boot from SD card, we have to implement mmc driver
in SPL stage, and get a slightly large spl binrary.
Am 03.07.2016 um 18:59 schrieb Ricardo Salveti:
> Make the external devices the preferred ones when booting the system
> (usb is already the first option). This allows users to easily boot
> custom distributions without requiring them to reflash/customize u-boot.
>
> Cc: Mateusz Kulikowski
hi Simon,
On 2016年07月12日 07:54, Simon Glass wrote:
Hi,
On 6 July 2016 at 03:34, Ziyuan Xu wrote:
This patchset add the fastboot support for rk3288, and I have tested on
firefly-rk3288 board.
Fix an issue which was mentioned in V1's cover-letter:
The DMA buffer was
Hi,
On 6 July 2016 at 08:44, Ihar Filipau wrote:
> Hi All!
>
> I have stumbled upon the lack of support for storage devices in API's
> ub_dev_write()/API_dev_write() functions. Currently the function
> supports only the network devices.
>
> I have implemented the support
On 10 July 2016 at 21:14, Kever Yang wrote:
> The 'evb_rk3036' and 'kylin' is not a vendor name, let's replace them
> to 'rockchip' which is a real _vendor_ name, and meet the architecure
> 'board///'.
>
> More boards from rockchip like evb_rk3288, evb_rk3399 will comes
Hi Kever,
On 11 July 2016 at 00:58, Kever Yang wrote:
> Hi Simon,
>
> On 07/09/2016 10:39 PM, Simon Glass wrote:
>>
>> Hi Kever,
>>
>> On 7 July 2016 at 20:45, Kever Yang wrote:
>>>
>>> The grf setting for rkpwm is only need in rk3288, other
Hi,
On 6 July 2016 at 03:34, Ziyuan Xu wrote:
> This patchset add the fastboot support for rk3288, and I have tested on
> firefly-rk3288 board.
>
> Fix an issue which was mentioned in V1's cover-letter:
> The DMA buffer was always zero after DMA transfer is complete, It
Hi Kever,
On 10 July 2016 at 21:14, Kever Yang wrote:
> Hi Simon,
>
>
> On 07/09/2016 10:38 PM, Simon Glass wrote:
>
> Hi Kevin,
>
> On 7 July 2016 at 21:49, Eddie Cai wrote:
>
> 2016-07-08 11:30 GMT+08:00 Kever Yang
On 27 June 2016 at 02:30, Ziyuan Xu wrote:
> From: Xu Ziyuan
>
> If we would like to boot from SD card, we have to implement mmc driver
> in SPL stage, and get a slightly large spl binrary. RK3288's bootrom code
> has the ability to load spl and
On 11 July 2016 at 03:14, Ziyuan Xu wrote:
> From: Xu Ziyuan
>
> evb-3288 board RK3288-based development board with 2 USB ports, HDMI,
> VGA, micro-SD card, audio, WiFi and Gigabit Ethernet. It also includes
> on-board 8G eMMC and 2GB of SDRAM.
Hi Ziyuan,
On 27 June 2016 at 02:30, Ziyuan Xu wrote:
> From: Xu Ziyuan
>
> If we would like to boot from SD card, we have to implement mmc driver
> in SPL stage, and get a slightly large spl binrary. RK3288's bootrom code
> has the ability to load
On Tue, Jul 12, 2016 at 12:54 AM, Andreas Färber wrote:
> Am 12.07.2016 um 00:52 schrieb Carlo Caione:
>> On Mon, Jul 11, 2016 at 11:38 PM, Andreas Färber wrote:
>>> Am 11.07.2016 um 22:36 schrieb Carlo Caione:
On Mon, Jul 11, 2016 at 10:15 PM, Andreas
Am 12.07.2016 um 00:52 schrieb Carlo Caione:
> On Mon, Jul 11, 2016 at 11:38 PM, Andreas Färber wrote:
>> Am 11.07.2016 um 22:36 schrieb Carlo Caione:
>>> On Mon, Jul 11, 2016 at 10:15 PM, Andreas Färber wrote:
>
> [...]
>
DRAM: 2 GiB
No
On Mon, Jul 11, 2016 at 11:38 PM, Andreas Färber wrote:
> Am 11.07.2016 um 22:36 schrieb Carlo Caione:
>> On Mon, Jul 11, 2016 at 10:15 PM, Andreas Färber wrote:
[...]
>>>
>>> DRAM: 2 GiB
>>> No maUsing default environment
>>>
>>> In:serial@4c0
>>> Out:
Hi,
On 4 July 2016 at 11:57, Simon Glass wrote:
>
> Note: This v3 series adds a test and fixes a few bugs found in generation of
> of-platdata.
>
> This series provides a way to compile in the contents of a device tree as C
> code into U-Boot, implementing an idea that Tom
Hi Tom,
This includes the MMC block-device stuff (which needs lots of testing
time), cleaning up some fdtdec COMPAT strings and some patman improvements.
The following changes since commit 19ce924ff914f315dc2fdf79f357825c513aed6e:
Prepare v2016.07 (2016-07-11 15:01:01 -0400)
are available in
Am 11.07.2016 um 22:36 schrieb Carlo Caione:
> On Mon, Jul 11, 2016 at 10:15 PM, Andreas Färber wrote:
>> [...]
>> NOTICE: BL3-1: v1.0(debug):4d2e34d
>> NOTICE: BL3-1: Built : 17:08:35, Oct 29 2015
>> INFO:BL3-1: Initializing runtime services
>> INFO:BL3-1: Preparing
Dear Tom,
In message <20160711195212.GA25382@bill-the-cat> you wrote:
>
> I've released v2016.07 and it's now live on git and FTP and ACD. As a
> possible bonus, the tarball is now signed with my PGP key.
Thanks a lot. Release statistics are also up now, oth for the recent
[1] and for the
On Mon, Jul 11, 2016 at 10:15 PM, Andreas Färber wrote:
> Am 11.07.2016 um 21:48 schrieb Beniamino Galvani:
>> On Mon, Jul 11, 2016 at 05:23:15AM +0100, Peter Robinson wrote:
>>> On Mon, Jul 11, 2016 at 4:57 AM, Andreas Färber wrote:
Last output:
Am 11.07.2016 um 21:48 schrieb Beniamino Galvani:
> On Mon, Jul 11, 2016 at 05:23:15AM +0100, Peter Robinson wrote:
>> On Mon, Jul 11, 2016 at 4:57 AM, Andreas Färber wrote:
>>> Last output:
>>>
>>> NOTICE: BL3-1: v1.0(debug):4d2e34d
>>> NOTICE: BL3-1: Built : 17:08:35, Oct 29
Hey all,
I've released v2016.07 and it's now live on git and FTP and ACD. As a
possible bonus, the tarball is now signed with my PGP key.
Looking over the changes in this release, I would say it's another good,
solid, iterative improvement over the last. MMC has moved to DM, we
have more tests
On Mon, Jul 11, 2016 at 05:23:15AM +0100, Peter Robinson wrote:
> On Mon, Jul 11, 2016 at 4:57 AM, Andreas Färber wrote:
> > Last output:
> >
> > NOTICE: BL3-1: v1.0(debug):4d2e34d
> > NOTICE: BL3-1: Built : 17:08:35, Oct 29 2015
> > INFO:BL3-1: Initializing runtime
From: Tim Harvey
The CONFIG_HIDE_LOGO_VERSION config can be used to disable putting the
U-Boot version string on top of the logo.
Signed-off-by: Tim Harvey
---
Changes in v2:
- move len and space variables to functio top
- hide extra string if
Am 11.07.2016 um 20:14 schrieb Bernhard Nortmann:
"transient" (='t') is like "any", but requests that a variable
should not be exported (ENV_FLAGS_VARACCESS_PREVENT_EXPORT).
"system" (='S') is meant for 'internal' variables that
aren't supposed to be changed by the user. It corresponds
to
Hi Bernhard,
On Mon, Jul 11, 2016 at 1:14 PM, Bernhard Nortmann
wrote:
> This series evolved around the idea of introducing a new env_op
> type to control (and possibly restrict) the export of variables.
> This is especially useful if one wants to prevent dynamic
>
I'm not sure why this breaks kernel loading.
Signed-off-by: Sandy Patterson
---
configs/rock2_defconfig | 1 +
1 file changed, 1 insertion(+)
diff --git a/configs/rock2_defconfig b/configs/rock2_defconfig
index 3e16b80..3a06b7e 100644
--- a/configs/rock2_defconfig
I am not sure why this limit is changing. But my kernel
doesn't load when it's above 256. This was testing on the
rock2 board.
Signed-off-by: Sandy Patterson
---
include/configs/rk3288_common.h | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)
diff --git
This reverts commit df120142f36b6ff8b12187b8860269763b2b3203.
Conflicts:
arch/arm/cpu/armv7/cache_v7.c
arch/arm/cpu/armv7/cache_v7_asm.S
Signed-off-by: Sandy Patterson
---
arch/arm/cpu/armv7/cache_v7.c | 24 +---
1 file changed,
This reverts commit c09d29057ab0b04db0857d319c6bff74de31b9c3.
Conflicts:
arch/arm/cpu/armv7/cache_v7.c
arch/arm/cpu/armv7/cache_v7_asm.S
Signed-off-by: Sandy Patterson
---
arch/arm/cpu/armv7/Makefile | 2 +-
I wasn't able to load the linux kernel using a Rock2 board
using the latest master branch. The board hangs after it has
handed executing over to the kernel. I found that the latest release
that worked was v2016.03.
I did some searching and I suspect the problem may be cache related.
This
"fel_booted" and "fel_scriptaddr" have a special meaning and get
used by U-Boot internally.
This patch aims at both preventing user modification of these
values, and at excluding them from being stored on "saveenv".
As this is achieved by setting specialized access flags,
also enable the "env
This patch introduces a new "export" environment operation
(env_op_export) and the corresponding access flag
ENV_FLAGS_VARACCESS_PREVENT_EXPORT; so that env_flags_validate()
may now check requests to export specific variables.
In turn, hexport_r() makes uses of this ability to suppress the
export
Like setenv(), but automatically marks the entry as "don't export".
Signed-off-by: Bernhard Nortmann
---
cmd/nvedit.c | 21 +
include/common.h | 1 +
2 files changed, 22 insertions(+)
diff --git a/cmd/nvedit.c b/cmd/nvedit.c
index
This is an attempt to prevent such information from ending up
in exported environment data, especially when doing "saveenv".
(http://lists.denx.de/pipermail/u-boot/2015-September/227611.html)
The patch makes use of the new setenv_transient() helper for
environment variables that get updated via
"transient" (='t') is like "any", but requests that a variable
should not be exported (ENV_FLAGS_VARACCESS_PREVENT_EXPORT).
"system" (='S') is meant for 'internal' variables that
aren't supposed to be changed by the user. It corresponds
to "transient" plus "read-only".
Signed-off-by: Bernhard
This prevents a possible compiler warning similar to
"net/eth-uclass.c::: warning: enumeration value
'env_op_*' not handled in switch [-Wswitch]".
Signed-off-by: Bernhard Nortmann
---
net/eth-uclass.c | 2 ++
1 file changed, 2 insertions(+)
diff --git
This series evolved around the idea of introducing a new env_op
type to control (and possibly restrict) the export of variables.
This is especially useful if one wants to prevent dynamic
configuration information from ending up in a saved environment -
the 'classic' example being network setup
This patch modifies env_flags_validate() in such a way that any
operation will *always* be allowed if H_PROGRAMMATIC is present.
Without this change, programmatically changing environment vars
may fail depending on their flags, e.g. when trying to setenv*()
a variable that is marked "read-only".
Hi all
I'm working with zynqmp evalutation board (zcu102 revB) and currently I rely on
FSBL generated by petalinux and I'm thinking of dropping it ans using u-boot's
SPL. I have spent some time trying to configure and use SPL, but I've stuck on
booting up the board.
I've prepared SD card as
Hi Tim,
On Fri, 8 Jul 2016 06:45:10 -0700
Tim Harvey thar...@gateworks.com wrote:
...
> I haven't seen any feedback on this. Do you have any comment or ack?
sorry for delay, I was on vacation. Applied slightly modified patch
to u-boot-video/next.
Thanks,
Anatolij
On 7/11/2016 12:05 PM, Jagan Teki wrote:
> On 11 July 2016 at 11:00, Vignesh R wrote:
>> Populating QSPI_RD_SNGL bit(0x1) in priv->cmd means that value
>> QSPI_INVAL (0x4) is not written to CMD field of QSPI_SPI_CMD_REG in
>> ti_qspi_cs_deactivate(). Therefore CS is never
From: Yunhui Cui
Errata: A-009282: QuadSPI data pre-fetch can result in incorrect data
Signed-off-by: Yunhui Cui
---
drivers/spi/fsl_qspi.c | 14 --
1 file changed, 12 insertions(+), 2 deletions(-)
diff --git a/drivers/spi/fsl_qspi.c
Hi all
I'm working with zynqmp evalutation board (zcu102 revB) and currently I rely on
FSBL generated by petalinux and I'm thinking of dropping it ans using u-boot's
SPL. I have spent some time trying to configure and use SPL, but I've stuck on
booting up the board.
I've prepared SD card as
With the change to set up pinctrl after relocation, link fails to boot. Add
a special case in the link code to handle this.
Fixes: d8906c1f (x86: Probe pinctrl driver in cpu_init_r())
Signed-off-by: Simon Glass
---
arch/x86/cpu/ivybridge/sdram.c | 5 +
1 file changed, 5
On 07/11/2016 12:49 AM, Yunhui Cui wrote:
> From: Yunhui Cui
>
> Errata: A-009282: QuadSPI data pre-fetch can result in incorrect data
>
> Signed-off-by: Yunhui Cui
> ---
> drivers/spi/fsl_qspi.c | 14 --
> 1 file changed, 12 insertions(+),
On Mon, Jul 11, 2016 at 09:56:48AM -0300, Fabio Estevam wrote:
> Hi Tom,
>
> On Fri, May 13, 2016 at 9:30 AM, Tom Rini wrote:
> > On Thu, May 12, 2016 at 11:22:17PM -0300, Fabio Estevam wrote:
> >> On Thu, May 12, 2016 at 11:12 PM, Fabio Estevam wrote:
>
On Sat, Jul 09, 2016 at 09:12:04PM +0800, jk wrote:
> It's easier to Cc rockchip maintainers on rockchip-releated patches.
>
> Signed-off-by: jk
Applied to u-boot/master, thanks!
--
Tom
signature.asc
Description: Digital signature
On 07/11/2016 04:23 PM, Stefano Babic wrote:
Hi Hannes,
Hi Stefano,
On 22/06/2016 12:07, Hannes Schmelzer wrote:
If MAC is directly connected to another MAC (like a switch for example)
we don't need to probe for a phy, autoneogation and so on. We simply
have to setup speed.
Signed-off-by:
On Mon, Jul 11, 2016 at 04:09:48PM +0200, Stefano Babic wrote:
> Because a gpimage cannot be detected, a false
> GP header is printed instead of checking
> for further image types.
>
> Move gpimage as last to be linked, letting check
> all other image types and printing a GP header just
> in
On Fri, Jul 08, 2016 at 03:25:23PM +0100, Andre Przywara wrote:
> Since we lack information about the DRAM initialization for the
> Allwinner A64 SoC, booting any A64 based board like the Pine64 is a bit
> involved at the moment.
> Add a README file to explain the process.
>
> Signed-off-by:
On 30/06/2016 15:08, Peng Fan wrote:
> Typo fix, "PPL2 -> PLL2"
>
> Signed-off-by: Peng Fan
> Cc: Stefano Babic
> ---
> arch/arm/cpu/armv7/mx6/clock.c | 2 +-
> 1 file changed, 1 insertion(+), 1 deletion(-)
>
> diff --git a/arch/arm/cpu/armv7/mx6/clock.c
On Wed, Jun 22, 2016 at 7:07 AM, Hannes Schmelzer wrote:
> if we build for an i.mx6 (d)ual(l)ite CONFIC_MX6DL we shall use
> MX6DL_PAD instead the common MX6_PAD.
>
> Signed-off-by: Hannes Schmelzer
Please put this for the current release; this is a bugfix and
On 22/06/2016 12:07, Hannes Schmelzer wrote:
> if we build for an i.mx6 (d)ual(l)ite CONFIC_MX6DL we shall use
> MX6DL_PAD instead the common MX6_PAD.
>
> Signed-off-by: Hannes Schmelzer
> ---
>
> arch/arm/include/asm/arch-mx6/mx6-pins.h | 4 ++--
> 1 file changed, 2
Hi Hannes,
On 22/06/2016 12:07, Hannes Schmelzer wrote:
> If MAC is directly connected to another MAC (like a switch for example)
> we don't need to probe for a phy, autoneogation and so on. We simply
> have to setup speed.
>
> Signed-off-by: Hannes Schmelzer
> ---
>
>
Because a gpimage cannot be detected, a false
GP header is printed instead of checking
for further image types.
Move gpimage as last to be linked, letting check
all other image types and printing a GP header just
in case no image is detected.
Signed-off-by: Stefano Babic
---
On 11/07/2016 14:41, Fabio Estevam wrote:
> Hi Stefano,
>
> On Mon, Jun 13, 2016 at 1:49 PM, Fabio Estevam wrote:
>> On Mon, Jun 13, 2016 at 1:01 PM, Vanessa Maegima
>> wrote:
>>> Add USB host support.
>>>
>>> Tested by connecting a USB pen drive:
On Mon, 2016-07-11 at 11:02 +0200, Hans de Goede wrote:
> > On Sat, 2016-07-09 at 15:12 +0200, Hans de Goede wrote:
> > >
> > > [...]
> > > +static void setup_environment(const void *fdt)
> >
> > It might be worth adding a commit to this function noting that it
> > must
> > remain idempotent.
>
Hi Tom,
On Fri, May 13, 2016 at 9:30 AM, Tom Rini wrote:
> On Thu, May 12, 2016 at 11:22:17PM -0300, Fabio Estevam wrote:
>> On Thu, May 12, 2016 at 11:12 PM, Fabio Estevam wrote:
>> > Hi Raul,
>> >
>> > In commit 0200020bc2b8192 ("imx6: Added DEK blob
This change gives common prefix for SDHCI_READ_STATUS_TIMEOUT.
Signed-off-by: Lukasz Majewski
---
drivers/mmc/sdhci.c | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)
diff --git a/drivers/mmc/sdhci.c b/drivers/mmc/sdhci.c
index 604f18d..aa4cd4f 100644
---
For some boards - e.g. odroid u3, it is necessary to adjust manually those
two timeouts.
Exynos4 based boards, which use SDHCI controller to read data from SD cards,
have SDHCI_QUIRK_BROKEN_R1B flag set. This quirk requires short timeout
values, since in fact it relies on timeout exit, because
Those values are necessary to provide SDHCI controller SD card write speed
comparable to those before introducing the commit:
29905a451b7ecf86785a4404e926fb14a8daced3.
Such adjustments are required on boards with SDHCI's SDHCI_QUIRK_BROKEN_R1B
quirk flag set.
Signed-off-by: Lukasz Majewski
Hi Stefano,
On Mon, Jun 13, 2016 at 1:49 PM, Fabio Estevam wrote:
> On Mon, Jun 13, 2016 at 1:01 PM, Vanessa Maegima
> wrote:
>> Add USB host support.
>>
>> Tested by connecting a USB pen drive:
>>
>> => usb start
>> starting USB...
>> USB0: Port
Hi Nikita,
On 10.07.2016 09:52, Nikita Kiryanov wrote:
Hi Christopher,
On Thu, Jul 07, 2016 at 03:30:25PM +0200, Christopher Spinrath wrote:
Hi Nikita,
On 07/07/2016 10:53 AM, Nikita Kiryanov wrote:
On Wed, Jun 22, 2016 at 07:17:53PM +0300, Igor Grinberg wrote:
On 06/19/2016 06:44 PM,
On Mon, Jul 11, 2016 at 3:51 AM, Alexey Brodkin
wrote:
> On Sat, 2016-07-09 at 10:02 -0300, Otavio Salvador wrote:
>> On Sat, Jul 9, 2016 at 9:42 AM, Alexey Brodkin
>> wrote:
>> >
>> > Recently I started to notice that u-boot.img built
The function fixup_silent_linux() is called in status BOOTM_STATE_LOADOS
to silence Linux if variable 'silent' is set.
Currently only the 'bootm' command state machine contains
BOOTM_STATE_LOADOS, but others like 'booti' or 'bootz' commands do not.
This means silent Linux does not work with these
From: Xu Ziyuan
evb-3288 board RK3288-based development board with 2 USB ports, HDMI,
VGA, micro-SD card, audio, WiFi and Gigabit Ethernet. It also includes
on-board 8G eMMC and 2GB of SDRAM. Expansion connector provide access to
display pins, I2C, SPI, UART and GPIOs.
Hi,
On 10-07-16 10:17, Ian Campbell wrote:
On Sat, 2016-07-09 at 22:22 +0200, Hans de Goede wrote:
Now that we know that the BROM stores a value indicating the boot-
source
at the beginning of SRAM, use that instead of trying to recreate the
BROM's boot probing.
Signed-off-by: Hans de Goede
Hi,
On 10-07-16 10:15, Ian Campbell wrote:
On Sat, 2016-07-09 at 15:12 +0200, Hans de Goede wrote:
Currently we fill ethaddr with a fixed unique address based on the
SoCs
serial (from the sid) to make sure that boards which use the
integrated
emac / gmac get a fixed mac rather then a random
On 07/07/2016 10:55 PM, York wrote:
> On 07/07/2016 12:52 AM, Yunhui Cui wrote:
> >
> >> On 07/07/2016 1:01 AM, york sun wrote:
> >> On 07/03/2016 08:27 PM, Yunhui Cui wrote:
> >>> From: Yunhui Cui
> >>>
> >>> A-009282: QuadSPI: QuadSPI data pre-fetch can result in incorrect
On Wed, Jul 06, 2016 at 11:22:48AM +1000, David Gibson wrote:
> On Tue, Jul 05, 2016 at 10:26:42AM +0200, Maxime Ripard wrote:
> > Add a function to retrieve a writeable property only by the first
> > characters of its name.
> >
> > Signed-off-by: Maxime Ripard
Hi David,
On Wed, Jul 06, 2016 at 11:16:41AM +1000, David Gibson wrote:
> On Tue, Jul 05, 2016 at 10:26:40AM +0200, Maxime Ripard wrote:
> > The function fdt_path_next_seperator had an obvious mispell. Fix it.
> >
> > Signed-off-by: Maxime Ripard
>
> Huh..
Hi Simon,
On 07/09/2016 10:39 PM, Simon Glass wrote:
Hi Kever,
On 7 July 2016 at 20:45, Kever Yang wrote:
The grf setting for rkpwm is only need in rk3288, other SoCs like
RK3399 which also use rkpwm do not need set the grf, let's add a
MACRO to make the code only
Hi Otavio,
On Sat, 2016-07-09 at 10:02 -0300, Otavio Salvador wrote:
> On Sat, Jul 9, 2016 at 9:42 AM, Alexey Brodkin
> wrote:
> >
> > Recently I started to notice that u-boot.img built for Wandboard
> > by some toolchains becomes so large that it basically overlaps
On 11 July 2016 at 11:00, Vignesh R wrote:
> Populating QSPI_RD_SNGL bit(0x1) in priv->cmd means that value
> QSPI_INVAL (0x4) is not written to CMD field of QSPI_SPI_CMD_REG in
> ti_qspi_cs_deactivate(). Therefore CS is never deactivated between
> successive READ ID which
96 matches
Mail list logo