Re: [U-Boot] [PATCH] arm: dts: exynos4: fix the device-tree compile warning

Hi 2017. 11. 30. 14:19에 "Jaehoon Chung" 님이 작성: On 11/28/2017 11:10 PM, Tom Rini wrote: > On Tue, Nov 28, 2017 at 04:20:39PM +0900, Jaehoon Chung wrote: > >> After updating dtc-1.4.5 version, there are too many warning. >> This patch is to fix about exynos4 series. >> >>

Re: [U-Boot] [PATCH] ARM: Samsung: Add Exynos5422-based Odroid HC1 support

Hi, 2017. 11. 11. 05:19에 "Krzysztof Kozlowski" 님이 작성: On Fri, Nov 03, 2017 at 09:30:30AM +0100, Marek Szyprowski wrote: > Odroid HC1 board is based on Odroid XU4 board, but it has no HDMI, > no eMMC, no build-in USB3.0 hub, no extension port pins, and no GPIO > button. USB3.0

Re: [U-Boot] [PATCH v5 07/20] common: Generic firmware loader for file system

Hi, On Thu, 7 Dec 2017 05:29:24 + Chee, Tien Fong wrote: > On Rab, 2017-12-06 at 12:00 +0100, Lothar Waßmann wrote: > > Hi, > > > > On Wed, 6 Dec 2017 10:06:21 + Chee, Tien Fong wrote: > > > > > > On Sel, 2017-12-05 at 09:53 +0100, Lothar Waßmann wrote: > > > > > > > > Hi, > > > > > >

Re: [U-Boot] [PATCH V2 23/23] Add DDR settings

Hi Philipp, >> +#define DDRC_DFITMG0_SHADOW(X) (DDRC_IPS_BASE_ADDR(X) + 0x2190) >> +#define DDRC_DFITMG1_SHADOW(X) (DDRC_IPS_BASE_ADDR(X) + 0x2194) >> +#define DDRC_DFITMG2_SHADOW(X) (DDRC_IPS_BASE_ADDR(X) + 0x21b4) >> +#define DDRC_DFITMG3_SHADOW(X)

Re: [U-Boot] [PATCH] arm: arm64: only use general regs

Hi Alexander, On Fri, Dec 01, 2017 at 10:46:29PM +0100, Alexander Graf wrote: > > >On 28.11.17 03:09, Peng Fan wrote: >> When compiling with android toolchain, there is an instruction >> "str q0, [x8],#16", but x8 is not 16bytes aligned, >> this instruction will trigger sync abort. >> >> So,

Re: [U-Boot] [PATCH] efi_loader: Fix partition offsets

On Fri, Dec 01, 2017 at 04:10:33PM +0100, Alexander Graf wrote: > Commit 884bcf6f65 (efi_loader: use proper device-paths for partitions) tried > to introduce the el torito scheme to all partition table types: Spawn > individual disk objects for each partition on a disk. > > Unfortunately, that

Re: [U-Boot] [PATCH] sf: ensure flash device is in 3-byte address mode

On Tue, Dec 5, 2017 at 11:50 AM, Goldschmidt Simon wrote: > + Lukasz (as a reviewer of my patch[1]) > > On Mon, Dec 4, 2017 at 8:20, Jagan Teki wrote: >> This is the patch[1] for 4-byte addressing, but I would wonder how can >> proceed >> operations with 4-byte

[U-Boot] [PATCH] board/ls2080a, ls1088a: Add check for mc-dpl applied in fdt

In fdt_fixup_board_enet() perform fdt fixup, fdt_status_okay, only when both MC is applied and DPL is deployed. Else returns failure, fdt_status_fail(). This patch add this check for - LS2080A/LS2088A boards: in dir ls2080a, ls2080ardb and ls2080aqds - LS1088A board: in dir ls1088a

Re: [U-Boot] [PATCH] sunxi: Fix UART console index for A33-OLinuXino

On Tue, Dec 5, 2017 at 3:11 PM, Maxime Ripard wrote: > On Tue, Dec 05, 2017 at 02:00:07PM +0800, Chen-Yu Tsai wrote: >> The A33-OLinuXino defconfig was using the default CONS_INDEX value for >> A33, which actually points to the R_UART, which is routed to the GPIO

Re: [U-Boot] [PATCH v2 1/1] sunxi: Fix A20-OLinuXino-MICRO LAN8710 support

On Thu, Dec 7, 2017 at 1:42 AM, Karsten Merker wrote: > On Mon, Nov 20, 2017 at 11:51:10AM +0100, Maxime Ripard wrote: >> On Sat, Nov 18, 2017 at 12:20:54AM +0100, Karsten Merker wrote: >> > On Fri, Nov 03, 2017 at 08:56:51AM +0200, Stefan Mavrodiev wrote: >> > > From revision

Re: [U-Boot] [PATCH v5 07/20] common: Generic firmware loader for file system

On Rab, 2017-12-06 at 12:00 +0100, Lothar Waßmann wrote: > Hi, > > On Wed, 6 Dec 2017 10:06:21 + Chee, Tien Fong wrote: > > > > On Sel, 2017-12-05 at 09:53 +0100, Lothar Waßmann wrote: > > > > > > Hi, > > > > > > On Tue,  5 Dec 2017 15:57:57 +0800 tien.fong.c...@intel.com > > > wrote: > >

Re: [U-Boot] [UBOOT PATCH 1/2] spi: zynqmp_qspi: Add support for ZynqMP qspi driver

On Thu, Nov 23, 2017 at 1:00 PM, Siva Durga Prasad Paladugu wrote: > Hi Jagan, > >> -Original Message- >> From: Jagan Teki [mailto:jagannadh.t...@gmail.com] >> Sent: Wednesday, November 01, 2017 2:54 PM >> To: Siva Durga Prasad Paladugu >> Cc:

Re: [U-Boot] [PATCH v2 2/5] net: sun8i_emac: Support RX/TX delay chains

On Thu, Dec 7, 2017 at 4:20 AM, Joe Hershberger wrote: > On Tue, Dec 5, 2017 at 8:34 PM, Chen-Yu Tsai wrote: >> On Wed, Dec 6, 2017 at 4:50 AM, Joe Hershberger >> wrote: >>> On Fri, Nov 24, 2017 at 11:08 PM, Chen-Yu Tsai

Re: [U-Boot] tools: omapimage: fix corner-case in byteswap path

On Mon, Dec 04, 2017 at 05:04:02PM +0100, Philipp Tomsich wrote: > Since commit 2614a208471e ("common: command: tempory buffer should > have size of command line buf"), there have been consistent Travis CI > failures on my builds (interestingly not for Tom, even though building > the same commit

Re: [U-Boot] [PULL] efi patch queue 2017-12-05

On Tue, Dec 05, 2017 at 10:59:07PM +0100, Alexander Graf wrote: > Hi Tom, > > This is my current patch queue for efi. Please pull. > > Alex > > > The following changes since commit 9804d88630cdb22f5f0ace05ac05942928410fd9: > > Merge branch 'rmobile-mx' of git://git.denx.de/u-boot-sh

[U-Boot] [PATCH] imx: Fix missing spl_sd configuration for wandboard.

In commit 6e6cf015e7cdd7ca83a933320a81201972bd5e5e ("Merge git://www.denx.de/git/u-boot-imx") the line defining spl_sd configuration for wandboard was removed, which resulted in no SPL target being built. Add it back. Signed-off-by: Vagrant Cascadian ---

Re: [U-Boot] [PATCH] common/memsize.c: restore content of the base address

Dear Patrick, In message <1512575263-23010-1-git-send-email-patrick.delau...@st.com> you wrote: > In function get_ram_size() and for 2 last cases the content of > the base address (*base) is not restored even it is > correctly saved in stack (in save[i]). > > This patch solved this issue. >

[U-Boot] [PATCH] powerpc: mpc85xx: Fix static TLB table for SDRAM

Most predefined TLB tables don't have memory coherence bit set for SDRAM. This wasn't an issue before invalidate_dcache_range() function was enabled. Without the coherence bit, dcache invalidation doesn't automatically flush the cache. The coherence bit is already set when dynamic TLB table is

Re: [U-Boot] [PATCH v2 2/5] net: sun8i_emac: Support RX/TX delay chains

On Tue, Dec 5, 2017 at 8:34 PM, Chen-Yu Tsai wrote: > On Wed, Dec 6, 2017 at 4:50 AM, Joe Hershberger > wrote: >> On Fri, Nov 24, 2017 at 11:08 PM, Chen-Yu Tsai wrote: >>> The EMAC syscon has configurable RX/TX delay chains for use with

Re: [U-Boot] [v3] armv8: ls1012a: enable/disable eSDHC1 through hwconfig for new RDB

On 12/06/2017 02:19 AM, Yangbo Lu wrote: > For LS1012ARDB RevD and later versions, the I2C reading for DIP > switch setting had been no longer reliable since the board was > reworked. This patch is to add hwconfig support to enable/disable I think this message is not accurate. How about saying

Re: [U-Boot] [PATCH] test/py: gpt: update size of gpt partition

On 12/06/2017 10:08 AM, Patrick Delaunay wrote: - avoid disturbing 0MiB partition size (in fact < 1MiB) - test overlap limit between part1 and part2 - test gpt write with data with modifier 'M' for MiB Signed-off-by: Patrick Delaunay Reviewed-by: Stephen Warren

[U-Boot] [PATCH] test/py: gpt: update size of gpt partition

- avoid disturbing 0MiB partition size (in fact < 1MiB) - test overlap limit between part1 and part2 - test gpt write with data with modifier 'M' for MiB Signed-off-by: Patrick Delaunay --- test ok on v2018.01-rc1 ./test/py/test.py -B sandbox =>

[U-Boot] [PATCH 2/2] configs: stm32f746-disco: enable MMC related flags

From: Patrice Chotard STM32F469-disco embeds an arm_pl180 mmc IP, so enable CMD_MMC, DM_MMC and ARM_PL180_MMCI flags. Also enables all filesystem command related flags : _ CMD_EXT2 _ CMD_EXT4 _ CMD_FAT _ CMD_FS_GENERIC _ CMD_GPT _ CMD_BOOTZ Signed-off-by:

[U-Boot] [PATCH 0/2] add STM32F7 MMC support

From: Patrice Chotard STM32F7 SoCs uses arm_pl180_mmci MMC IP. Enable MMC support by updating DT and enabling MMC related flags into defconfig. Patrice Chotard (2): ARM: DTS: stm32: add MMC nodes for stm32f746-disco and stm32f769-disco configs: stm32f746-disco:

[U-Boot] [PATCH 1/2] ARM: DTS: stm32: add MMC nodes for stm32f746-disco and stm32f769-disco

From: Patrice Chotard Add DT nodes to enable ARM_PL180_MMCI IP support for STM32F746 and STM32F769 discovery boards There is a hardware issue on these boards, it misses a pullup on the GPIO line used as card detect to allow correct SD card detection. As workaround,

[U-Boot] [PATCH] common/memsize.c: restore content of the base address

In function get_ram_size() and for 2 last cases the content of the base address (*base) is not restored even it is correctly saved in stack (in save[i]). This patch solved this issue. The content of the base address is saved in new variable in stack (save_base) to avoid the need of other

Re: [U-Boot] [PATCH 4/4] meson: use the clock driver

On 03/12/2017 10:17, Beniamino Galvani wrote: > Use the clk framework to initialize clocks from drivers that need them > instead of having hardcoded frequencies and initializations from board > code. > > Signed-off-by: Beniamino Galvani > --- >

Re: [U-Boot] [PATCH 3/4] clk: add Amlogic meson clock driver

On 03/12/2017 10:17, Beniamino Galvani wrote: > Introduce a basic clock driver for Amlogic Meson SoCs which supports > enabling/disabling clock gates and getting their frequency. > > Signed-off-by: Beniamino Galvani > --- > arch/arm/mach-meson/Kconfig | 2 + >

Re: [U-Boot] [PATCH 2/4] ARM: meson: add clock measurement function

On 03/12/2017 10:17, Beniamino Galvani wrote: > Add add a function to measure the current clock rate. > > Signed-off-by: Beniamino Galvani > --- > arch/arm/include/asm/arch-meson/clock.h | 34 + > arch/arm/mach-meson/Makefile| 2 +- >

Re: [U-Boot] [PATCH 1/4] ARM: dts: update gxbb-clkc.h from Linux 4.14

On 03/12/2017 10:17, Beniamino Galvani wrote: > Update gxbb-clkc.h from Linux 4.14 as it contains new clock ids. > > Signed-off-by: Beniamino Galvani > --- > include/dt-bindings/clock/gxbb-clkc.h | 75 > +++ > 1 file changed, 75

Re: [U-Boot] [RFC PATCH] test: py: Disable sleep test for qemu targets

On Wed, Dec 06, 2017 at 10:53:08AM +0100, Michal Simek wrote: > On 5.12.2017 16:13, Tom Rini wrote: > > On Tue, Dec 05, 2017 at 01:10:47PM +0100, Michal Simek wrote: > >> On 4.12.2017 18:14, Stephen Warren wrote: > >>> On 12/04/2017 08:30 AM, Tom Rini wrote: > On Mon, Dec 04, 2017 at

[U-Boot] [RFC PATCH v3 01/10] mtd: nand: pxa3xx_nand: Increase initial buffer size

From: Ofer Heifetz The initial buffer is used for the initial commands used to detect a flash device (STATUS, READID and PARAM). ONFI param page is 256 bytes, and there are three redundant copies to be read. JEDEC param page is 512 bytes, and there are also three redundant

Re: [U-Boot] [RFC PATCH v3 00/10] pxa3xx_nand updates

these patches were sent on mistake and should be ignored, I will rework this patchset and send again later > -Original Message- > From: of...@marvell.com [mailto:of...@marvell.com] > Sent: Wednesday, December 06, 2017 8:56 AM > To: u-boot@lists.denx.de > Cc: Nadav Haklai

[U-Boot] [RFC PATCH v3 10/10] mtd: nand: pxa3xx_nand: add support for partial chunks

From: Ofer Heifetz This commit is needed to properly support the 8-bits ECC configuration with 4KB pages. When pages larger than 2 KB are used on platforms using the PXA3xx NAND controller, the reading/programming operations need to be split in chunks of 2 KBs or less because

Re: [U-Boot] [RFC PATCH v3 01/10] mtd: nand: pxa3xx_nand: Increase initial buffer size

Hi Chris > -Original Message- > From: Chris Packham [mailto:judge.pack...@gmail.com] > Sent: Wednesday, December 06, 2017 9:49 AM > To: Ofer Heifetz ; Scott Wood ; > Scott Wood ; Tom Rini > Cc: u-boot

[U-Boot] [RFC PATCH v3 07/10] mtd: pxa3xx_nand: Increase the initial chunk size

From: Ofer Heifetz The chunk size represents the size of the data chunks, which is used by the controllers that allow to split transfered data. However, the initial chunk size is used in a non-splitted way, during device identification. Therefore, it must be large enough for

[U-Boot] [RFC PATCH v3 04/10] mtd: nand: pxa3xx_nand: fix early spurious interrupt

From: Ofer Heifetz When the nand is first probe, and upon the first command start, the status bits should be cleared before the interrupts are unmasked. [ Linux commit 0b14392db2e998157d924085d7913e537ec26121 ] Cc: Robert Jarzmik Signed-off-by: Chris Packham Reviewed-by:

[U-Boot] [RFC PATCH v3 09/10] mtd: pxa3xx_nand: Simplify pxa3xx_nand_scan

From: Ofer Heifetz This commit simplifies the initial configuration performed by pxa3xx_nand_scan. No functionality change is intended. [ Linux commit 154f50fbde539c20bbf74854461d932ebdace4d5 ] Cc: Ezequiel García Signed-off-by: Chris Packham Reviewed-by: Ofer Heifetz

[U-Boot] [RFC PATCH v3 05/10] mtd: nand: pxa3xx-nand: fix random command timeouts

From: Ofer Heifetz When 2 commands are submitted in a row, and the second is very quick, the completion of the second command might never come. This happens especially if the second command is quick, such as a status read after an erase [ Linux commit

[U-Boot] [RFC PATCH v3 08/10] mtd: pxa3xx_nand: Fix initial controller configuration

From: Ofer Heifetz The Data Flash Control Register (NDCR) contains two types of parameters: those that are needed for device identification, and those that can only be set after device identification. Therefore, the driver can't set them all at once and instead needs to

[U-Boot] [RFC PATCH v3 06/10] nand: pxa3xx: Increase READ_ID buffer and make the size static

From: Ofer Heifetz The read ID count should be made as large as the maximum READ_ID size, so there's no need to have dynamic size. This commit sets the hardware maximum read ID count, which should be more than enough on all cases. Also, we get rid of the read_id_bytes, and use

[U-Boot] [RFC PATCH v3 02/10] mtd: nand: pxa3xx_nand: use nand_to_mtd()

From: Ofer Heifetz Don't store struct mtd_info in struct pxa3xx_nand_host. Instead use the one that is already part of struct nand_chip. This brings us in line with current U-boot and Linux conventions. Signed-off-by: Chris Packham Reviewed-by: Ofer Heifetz

[U-Boot] [RFC PATCH v3 03/10] mtd: nand: pxa3xx_nand: sync pxa3xx_nand_set_sdr_timing()

From: Ofer Heifetz Since the pxa3xx_nand driver was added there has been a discrepancy in pxa3xx_nand_set_sdr_timing() around the setting of tWP_min and tRP_min. This brings us into line with the current Linux code. Signed-off-by: Chris Packham Tested-by: Ofer Heifetz

[U-Boot] [RFC PATCH v3 00/10] pxa3xx_nand updates

From: Ofer Heifetz I'm looking into the NAND support for the db-88f6820-amc board. There are a number of changes in the pxa3xx_nand driver in Linux that are relevant (not specifically to this boards but to Armada boards in general). Some of these changes are cleanups and some

Re: [U-Boot] [PATCH v5 07/20] common: Generic firmware loader for file system

Hi, On Wed, 6 Dec 2017 10:06:21 + Chee, Tien Fong wrote: > On Sel, 2017-12-05 at 09:53 +0100, Lothar Waßmann wrote: > > Hi, > > > > On Tue,  5 Dec 2017 15:57:57 +0800 tien.fong.c...@intel.com wrote: > > > > > > From: Tien Fong Chee > > > > > > This is file system

Re: [U-Boot] [v2] armv8: ls1012a: enable/disable eSDHC1 through hwconfig for RDB

Hi York, Thank you for your suggestion. I sent out v3 patch which is backward-compatible. Please check. Thanks a lot. Best regards, Yangbo Lu > -Original Message- > From: York Sun > Sent: 2017年12月1日 1:59 > To: Y.b. Lu ; u-boot@lists.denx.de > Cc: Xiaobo Xie

[U-Boot] [v3] armv8: ls1012a: enable/disable eSDHC1 through hwconfig for new RDB

For LS1012ARDB RevD and later versions, the I2C reading for DIP switch setting had been no longer reliable since the board was reworked. This patch is to add hwconfig support to enable/disable eSDHC1 manually for these boards. Also let kernel decide status of esdhc0. Signed-off-by: Yangbo Lu

Re: [U-Boot] [PATCH v5 07/20] common: Generic firmware loader for file system

On Sel, 2017-12-05 at 09:53 +0100, Lothar Waßmann wrote: > Hi, > > On Tue,  5 Dec 2017 15:57:57 +0800 tien.fong.c...@intel.com wrote: > > > > From: Tien Fong Chee > > > > This is file system generic loader which can be used to load > > the file image from the storage

Re: [U-Boot] [RFC PATCH] test: py: Disable sleep test for qemu targets

On 5.12.2017 16:13, Tom Rini wrote: > On Tue, Dec 05, 2017 at 01:10:47PM +0100, Michal Simek wrote: >> On 4.12.2017 18:14, Stephen Warren wrote: >>> On 12/04/2017 08:30 AM, Tom Rini wrote: On Mon, Dec 04, 2017 at 03:21:04PM +0100, Michal Simek wrote: > On 4.12.2017 15:03, Tom Rini wrote:

Re: [U-Boot] [RFC PATCH] test: py: Disable sleep test for qemu targets

On 5.12.2017 19:38, Tom Rini wrote: > On Tue, Dec 05, 2017 at 11:20:57AM -0700, Stephen Warren wrote: >> On 12/04/2017 04:21 PM, Tom Rini wrote: >>> On Mon, Dec 04, 2017 at 10:14:06AM -0700, Stephen Warren wrote: On 12/04/2017 08:30 AM, Tom Rini wrote: > On Mon, Dec 04, 2017 at 03:21:04PM

Re: [U-Boot] [UBOOT PATCH 1/2] spi: zynqmp_qspi: Add support for ZynqMP qspi driver

Hi Jagan, Ping!! Thanks, Siva > -Original Message- > From: Siva Durga Prasad Paladugu > Sent: Thursday, November 23, 2017 1:01 PM > To: Jagan Teki > Cc: u-boot@lists.denx.de; Liam Beguin > Subject: RE: [UBOOT PATCH 1/2] spi: zynqmp_qspi:

Re: [U-Boot] [PATCH 7/9] armv8: fsl-lsch2: configure pfe's scfg & dcfg registers

Hi Poonam, > -Original Message- > From: Poonam Aggrwal > Sent: Friday, November 24, 2017 11:25 AM > To: Calvin Johnson ; u-boot@lists.denx.de > Cc: joe.hershber...@ni.com; Anji Jagarlmudi > Subject: RE: [U-Boot] [PATCH 7/9] armv8:

Re: [U-Boot] [PATCH 0/3] ls1012a: fix tftp failure

Hi Joe, > -Original Message- > From: Joe Hershberger [mailto:joe.hershber...@gmail.com] > Sent: Wednesday, December 06, 2017 2:35 AM > > > > Your PFE patch set is not fully reviewed or accepted. If I were you, I > would probably send v2 version to include all the

Re: [U-Boot] [PATCH 9/9] configs: ls1012a: add pfe configuration for LS1012A

> -Original Message- > From: Calvin Johnson [mailto:calvin.john...@nxp.com] > Sent: Monday, October 09, 2017 2:42 PM > To: u-boot@lists.denx.de > Cc: Prabhakar Kushwaha ; York Sun > ; joe.hershber...@ni.com; Calvin Johnson >

Re: [U-Boot] [PATCH v4 08/10] mmc: make UHS and HS200 optional

On 02/12/2017 04:29, Simon Glass wrote: Hi Jean-Jacques, On 29 November 2017 at 07:29, Jean-Jacques Hiblot wrote: Supporting USH and HS200 increases the code size as it brings in IO voltage control, tuning and fatter data structures. Use Kconfig configuration to select