Dear Heinrich Schuchardt,
On Mon, 7 Sep 2020 at 14:13, Minkyu Kang wrote:
> Dear Heinrich Schuchardt,
>
> On 07/09/2020 04:33, Heinrich Schuchardt wrote:
> > On 9/6/20 9:00 PM, Andre Heider wrote:
> >> On 05/09/2020 12:02, Heinrich Schuchardt wrote:
> >>> Symbol CONFIG_DEFAULT_CONSOLE in
Dear Andre Heider,
On Wed, 23 Sep 2020 at 03:59, Simon Glass wrote:
> On Thu, 17 Sep 2020 at 00:52, Andre Heider wrote:
> >
> > These are all unused.
> >
> > Signed-off-by: Andre Heider
> > ---
> > This sets completely removes CONFIG_DEFAULT_CONSOLE from the tree.
> > Only compile time
By using a hypervisor call, we can implement DEBUG_UART on xen.
This will allow us to see messages even earlier than serial_init().
Signed-off-by: AKASHI Takahiro
---
drivers/serial/Kconfig | 14 +++---
drivers/serial/serial_xen.c | 20
2 files changed, 31
This new function, xen_debug_putc(), is intended to be used to
enable CONFIG_DEBUG_UART on xen guest.
Please note that the underlying functionality in Xen is available
only when Xen is configured with !NDEBUG but is much simpler than
a generic HYPERVISOR_console_io().
Signed-off-by: AKASHI
At present, DM_FLAG_PRE_RELOC is set only if !OF_CONTROL.
It doesn't make sense for this para-virtualized driver.
With this patch applied, you will be able to see early boot messages:
U-Boot 2020.10-1-ge442e71a6c52-dirty (Oct 15 2020 - 11:02:25 +0900)
xenguest
Xen virtual CPU
Model:
This patch series improves the behavior and functionality of console
output on Xen:
Patch#1: allow for U-Boot banner
Patch#2-4: enable DEBUG_UART (or early printf)
AKASHI Takahiro (4):
serial: serial_xen: print U-Boot banner and others
arch: arm/xen: add putc() for debugging
xen: add
Those definitions added are used with HYPERVISOR_console_io().
Signed-off-by: AKASHI Takahiro
---
include/xen/interface/xen.h | 6 ++
1 file changed, 6 insertions(+)
diff --git a/include/xen/interface/xen.h b/include/xen/interface/xen.h
index eec8ab75b9ce..a7c8ed781b34 100644
---
Hi Mike
All *.c and *.h files under
https://gitlab.denx.de/u-boot/u-boot/-/blob/master/lib/zlib/ have header
statement "For conditions of distribution and use, see copyright notice in
zlib.h". But, there is no copyright notice in zlib.h. Are you miss adding it?
Regards
Ley Foon
Hi Tom,
The patches has been rebased onto the up-to-date U-Boot master.
A makefile error is also fixed in the revised version and verified with an
AST2500 EVB.
Thanks,
Chiawei
> -Original Message-
> From: ChiaWei Wang
> Sent: Thursday, October 15, 2020 10:25 AM
> To:
This patch series refactors the reset method to use the
System Control Unit (SCU) reset control for simplicity.
In addition, the naming of reset driver and Kconfig
option is also refined for future consistency.
v3:
- Fix Makefile to adapt to the renamed reset driver file
v2:
- Rebase
1. Rename AST2500 reset driver from ast2500-reset.c
to reset-ast2500.c
2. Rename AST2500 reset kconfig option from AST2500_RESET
to RESET_AST2500
Signed-off-by: Chia-Wei, Wang
Reviewed-by: Ryan Chen
---
drivers/reset/Kconfig | 2 +-
drivers/reset/Makefile
The System Control Unit (SCU) controller of Aspeed
SoCs provides the reset control for each peripheral.
This patch refactors the reset method to leverage
the SCU reset control. Thus the driver dependency
on watchdog including dedicated WDT API and reset
flag encoding can be eliminated.
The
On Wed, 2020-10-14 at 15:31 +0200, Marek Vasut wrote:
> On 10/14/20 3:03 PM, Chunfeng Yun wrote:
> > On Wed, 2020-10-14 at 15:01 +0200, Marek Vasut wrote:
> >> On 10/14/20 2:54 PM, Chunfeng Yun wrote:
> >>> Set CONFIG_USB_MTU3_GADGET=y to enable device mode explicitly,
> >>> try to avoid build
Hi Marek,
On Wed, 2020-10-14 at 15:03 +0200, Marek Vasut wrote:
> On 10/14/20 2:29 PM, Chunfeng Yun wrote:
> > On Wed, 2020-10-14 at 12:56 +0200, Marek Vasut wrote:
> >> On 10/14/20 10:50 AM, Chunfeng Yun wrote:
> >>> This patch adds support for the MediaTek USB3 DRD controller,
> >>> its host
On Wed, 2020-10-14 at 15:31 +0200, Marek Vasut wrote:
> On 10/14/20 3:03 PM, Chunfeng Yun wrote:
> > On Wed, 2020-10-14 at 15:01 +0200, Marek Vasut wrote:
> >> On 10/14/20 2:54 PM, Chunfeng Yun wrote:
> >>> Set CONFIG_USB_MTU3_GADGET=y to enable device mode explicitly,
> >>> try to avoid build
On Wed, Oct 14, 2020 at 10:19:26AM +0200, Stefan Roese wrote:
> Hi Tom,
>
> please pull the first series of Marvell MVEBU related patches. Here the
> summary log:
>
Applied to u-boot/master, thanks!
--
Tom
signature.asc
Description: PGP signature
The 12d152620d commit fixed the get_rate helper because the set_parent
one did not re-parent the clock device to the new parent. The 4d139f3838
commit allows you to remove this workaround by calling the
clk_get_parent_rate routine.
Signed-off-by: Dario Binacchi
---
Changes in v2:
- Replace
On 14/10/2020 22:31, Tom Rini wrote:
> On Wed, Oct 14, 2020 at 09:58:28PM +0300, Alper Nebi Yasak wrote:
>> On 14/10/2020 18:24, Tom Rini wrote:
>>> Ugh. In so far as anything can be re-licensed, who did it all
>>> originally? I suspect coreboot isn't interested in 2.0+ but we can do
>>>
On Wed, Oct 14, 2020 at 09:58:28PM +0300, Alper Nebi Yasak wrote:
> On 14/10/2020 18:24, Tom Rini wrote:
> > On Tue, Oct 13, 2020 at 09:54:55AM -0600, Simon Glass wrote:
> >> I think it is OK to change the file to GPL2. I'm not sure if changing
> >> coreboot parts to 2.0+ is an option. I believe
Hi,
On Wed, 14 Oct 2020 at 09:24, Tom Rini wrote:
>
> On Tue, Oct 13, 2020 at 09:54:55AM -0600, Simon Glass wrote:
> > Hi Alper,
> >
> > On Tue, 13 Oct 2020 at 09:01, Alper Nebi Yasak
> > wrote:
> > >
> > > On 12/10/2020 06:34, Simon Glass wrote:
> > > > On Tue, 6 Oct 2020 at 14:40, Alper Nebi
On 14/10/2020 18:24, Tom Rini wrote:
> On Tue, Oct 13, 2020 at 09:54:55AM -0600, Simon Glass wrote:
>> I think it is OK to change the file to GPL2. I'm not sure if changing
>> coreboot parts to 2.0+ is an option. I believe the use of 2+ in U-Boot
>> is for fairly narrow reasons, but I'm not sure
Hello,
> On 11 Oct 2020, at 16:39, Emmanuel Vadot wrote:
>
>
> Hi Simon,
>
> On Sun, 19 Jul 2020 13:55:58 -0600
> Simon Glass wrote:
>
>> Add a simple binman config and enable CONFIG_HAS_ROM so that U-Boot
>> produces a ROM for bob.
>>
>> Signed-off-by: Simon Glass
>> ---
>>
>> Changes in
On Fri, Mar 20, 2020 at 10:59:23AM +0100, Frédéric Danis wrote:
> Add PStore command to sandbox and sandbox64 defconfigs.
> Add test checking:
> - 'pstore display' of all records
> - 'pstore display' only the 2nd dump record
> - 'pstore save' of all records
>
> Signed-off-by: Frédéric Danis
>
On Tue, Oct 06, 2020 at 04:08:35PM +0200, Christian Gmeiner wrote:
> Set the defaults on probe for the packet buffer size registers
> for the i210.
>
> The TX/RX PBSIZE register of the i210 resets to its default value
> only at power-on - see Intel Ethernet Controller I210 Datasheet rev 3.5
>
On Tue, Oct 06, 2020 at 05:56:59PM +0200, Heinrich Schuchardt wrote:
> Sphinx.override_domain() is deprecated since Sphinx 1.8 and removed in
> Sphinx 3.
>
> Use Sphinx.add_domain(, override=True) instead.
>
> Signed-off-by: Heinrich Schuchardt
Applied to u-boot/master, thanks!
--
Tom
On Fri, Mar 20, 2020 at 10:59:24AM +0100, Frédéric Danis wrote:
> To simplify configuration and keep synchronized the PStore/Ramoops between
> U-Boot and the Linux kernel, this commit dynamically adds the Ramoops
> parameters defined in the U-Boot session to the Device Tree.
>
> Signed-off-by:
On Fri, Mar 20, 2020 at 10:59:22AM +0100, Frédéric Danis wrote:
> This patch adds a new pstore command allowing to display or save ramoops
> logs (oops, panic, console, ftrace and user) generated by a previous
> kernel crash.
> PStore parameters can be set in U-Boot configuration file, or at
On Mon, Oct 05, 2020 at 09:57:29AM +0300, Alper Nebi Yasak wrote:
> CONFIG_IS_ENABLED() takes the kconfig name without the CONFIG_ prefix,
> e.g. CONFIG_IS_ENABLED(CLK) for CONFIG_CLK. Some of these were being
> fixed every now and then, see:
>
> commit 71ba2cb0d678 ("board: stm32mp1:
On Mon, Oct 05, 2020 at 09:57:30AM +0300, Alper Nebi Yasak wrote:
> CONFIG_IS_ENABLED() takes the kconfig name without the CONFIG_ prefix,
> e.g. CONFIG_IS_ENABLED(CLK) for CONFIG_CLK. Make including the prefix
> an error in checkpatch.pl so calls in the wrong format aren't
> accidentally
On Mon, Oct 05, 2020 at 08:30:08AM +0200, Heinrich Schuchardt wrote:
> Sphinx documentation is only available for enums not for #defines.
> Anyway it is better to keep related definitions in an enum.
>
> Signed-off-by: Heinrich Schuchardt
> Reviewed-by: Simon Glass
Applied to u-boot/master,
On Tue, Sep 29, 2020 at 11:14:29PM -0300, Otavio Salvador wrote:
> The USB SDP protocol require the SPL serial support to allow the build
> to succeed.
>
> Signed-off-by: Otavio Salvador
Applied to u-boot/master, thanks!
--
Tom
signature.asc
Description: PGP signature
On Mon, Oct 05, 2020 at 08:30:09AM +0200, Heinrich Schuchardt wrote:
> Add the missing Sphinx documentation for struct global_data and
> gd_board_type().
>
> Signed-off-by: Heinrich Schuchardt
> Reviewed-by: Simon Glass
Applied to u-boot/master, thanks!
--
Tom
signature.asc
Description:
On Mon, Oct 05, 2020 at 08:30:10AM +0200, Heinrich Schuchardt wrote:
> Add the description of the global data pointer to the generated HTML
> documentation.
>
> Signed-off-by: Heinrich Schuchardt
> Reviewed-by: Simon Glass
Applied to u-boot/master, thanks!
--
Tom
signature.asc
On Tue, Sep 15, 2020 at 01:58:11AM +0200, Heinrich Schuchardt wrote:
> Functions that are used in multiple C modules should be defined in an
> include.
>
> Signed-off-by: Heinrich Schuchardt
> Reviewed-by: Michael Walle
Applied to u-boot/master, thanks!
--
Tom
signature.asc
Description:
On Mon, Sep 14, 2020 at 12:50:56PM +0200, Heinrich Schuchardt wrote:
> To make the button command useful in a shell script it should return the
> status of the button:
>
> * 0 (true) - pressed, on
> * 1 (false) - not pressed, off
>
> The button command takes only one argument. Correct maxargs.
On Sat, Sep 19, 2020 at 07:55:35AM +0200, Heinrich Schuchardt wrote:
> The EFI_RNG_PROTOCOL is needed for address randomization in Linux.
> We should provide it by default on QEMU.
>
> Reported-by: François Ozog
> Signed-off-by: Heinrich Schuchardt
Applied to u-boot/master, thanks!
--
Tom
On Mon, Sep 14, 2020 at 12:50:54PM +0200, Heinrich Schuchardt wrote:
> Using different strings for the device tree node labels and the label
> property of buttons sharpens the button label unit test.
>
> Signed-off-by: Heinrich Schuchardt
> Reviewed-by: Philippe Reynes
Applied to
On Mon, Sep 14, 2020 at 12:50:55PM +0200, Heinrich Schuchardt wrote:
> For testing purposes keep the output value when switching to input.
> This allows us to manipulate the input value via the gpio command.
>
> Signed-off-by: Heinrich Schuchardt
> Reviewed-by: Philippe Reynes
Applied to
On Thu, Sep 03, 2020 at 02:25:15PM -0300, Otavio Salvador wrote:
> Signed-off-by: Otavio Salvador
> Reviewed-by: Tom Rini
> Reviewed-by: Stefan Roese
Applied to u-boot/master, thanks!
--
Tom
signature.asc
Description: PGP signature
On Tue, Sep 29, 2020 at 08:13:00AM +0100, Lad Prabhakar wrote:
> do_save() function defined in fs.c also supports FAT file system
> re-use the same for fatwrite command.
>
> Signed-off-by: Lad Prabhakar
> Reviewed-by: Biju Das
> ---
> cmd/fat.c | 43 +--
On Tue, Aug 04, 2020 at 10:05:46AM +0100, David Woodhouse wrote:
> Since it's so trivial I could just about tolerate this when there were only
> two copies of it. But now there are about to be three.
>
> Signed-off-by: David Woodhouse
Applied to u-boot/master, thanks!
--
Tom
signature.asc
On Tue, Aug 04, 2020 at 10:05:47AM +0100, David Woodhouse wrote:
> This parallels what I added for FAT in commit 6731bef6966, allowing the
> environment to be found in a specific partition on the device that the
> board's mmc_get_env_dev() returns. On the Banana Pi R2 that means the
> device that
On Wed, Sep 09, 2020 at 04:24:56PM -0400, Sean Anderson wrote:
> get_ticks does not always succeed. Sometimes it can be called before the
> timer has been initialized. If it does, it returns a negative errno.
> This causes the timer to appear non-monotonic, because the value will
> become much
This sync's the RZ/G2H clock tables with mainline linux 5.9 commit
bbf5c979011a ("Linux 5.9").
Signed-off-by: Biju Das
Reviewed-by: Lad Prabhakar
---
V2->V3
* Synced with Linux 5.9.
* Updated commit message.
V1->V2
* Rebased to u-boot-sh master.
---
arch/arm/mach-rmobile/Kconfig.64
This sync's the RZ/G2N clock tables with mainline linux 5.9 commit
bbf5c979011a ("Linux 5.9").
Signed-off-by: Biju Das
Reviewed-by: Lad Prabhakar
---
V2->V3
* Synced with Linux 5.9.
* Updated commit message.
V1->V2
* Rebased to u-boot-sh master.
---
arch/arm/mach-rmobile/Kconfig.64
Add Clock driver support for RZ/G2[HN] SoC's.
This patches are based on u-boot-sh master.
Biju Das (2):
clk: renesas: Add R8A774B1 clock tables
clk: renesas: Add R8A774E1 clock tables
arch/arm/mach-rmobile/Kconfig.64| 2 +
drivers/clk/renesas/Kconfig | 12 +
On Thu, Sep 17, 2020 at 3:50 PM Lad Prabhakar
wrote:
>
> Add Winbond W25M512JV flash device description.
>
> Linux already has the flash entry present. A snippet below:
> { "w25m512jv", INFO(0xef7119, 0, 64 * 1024, 1024...},
>
> Signed-off-by: Lad Prabhakar
> Reviewed-by: Biju Das
> ---
>
On 10/9/20 7:00 PM, Sean Anderson wrote:
On 10/9/20 12:43 PM, Harry Waschkeit wrote:
Hi Sean,
thanks for your try and sorry for the inconvenience my beginner's mistakes have
caused :-(
It is definitely no good idea to use copy with patch data, I should have
guessed that beforehand ...
You
Sync the R8A77990 SoC PFC tables with Linux 5.9 , commit bbf5c979011a.
Signed-off-by: Lad Prabhakar
Reviewed-by: Biju Das
---
v2->v3
* Synced with Linux 5.9 instead of 5.8.
* Updated commit message.
v1->v2
* Updated commit message
* Synced with Linux 5.8 instead of 5.9.rc4
v1:
On Wed, Oct 14, 2020 at 05:11:58PM +0800, Peng Fan wrote:
> V2:
> Migrate README to doc/board/freescale
> patch 1 is not changed.
Thanks for doing this!
--
Tom
signature.asc
Description: PGP signature
On Tue, Oct 13, 2020 at 09:54:55AM -0600, Simon Glass wrote:
> Hi Alper,
>
> On Tue, 13 Oct 2020 at 09:01, Alper Nebi Yasak
> wrote:
> >
> > On 12/10/2020 06:34, Simon Glass wrote:
> > > On Tue, 6 Oct 2020 at 14:40, Alper Nebi Yasak
> > > wrote:
> > >>
> > >> Found this by comparing it to the
Add support for getting a node/property from aliases.
The similar functionality is provided for chosen node and this
implemenatation is copy of it.
Signed-off-by: Michal Simek
---
drivers/core/ofnode.c | 22 ++
include/dm/ofnode.h | 22 ++
The most of Xilinx evaluation boards have FMC connectors which contain
small eeprom for card identification. That's why read content of eeprom and
record it.
Also generate cardX_ variables for easier script handling.
Signed-off-by: Michal Simek
---
board/xilinx/common/board.c | 85
Hi,
Based on discussion with Rob we should be using nvmem alias to pointing to
eeprom which stores information about device. ZynqMP boards are using
format which is based on offset. The code is reading it and setup
environment variables based on it. They can be used within scripts to
automate
Starts to use new way how eeproms should be referenced.
Reference is done via nvmem alias nodes. When this new way is specified
code itself read the eeprom and decode xilinx legacy format and fill struct
xilinx_board_description. Then based on information present there board_*
variables are setup.
On 10/14/20 3:03 PM, Chunfeng Yun wrote:
> On Wed, 2020-10-14 at 15:01 +0200, Marek Vasut wrote:
>> On 10/14/20 2:54 PM, Chunfeng Yun wrote:
>>> Set CONFIG_USB_MTU3_GADGET=y to enable device mode explicitly,
>>> try to avoid build error:
>>> "undefined reference to
On Wednesday 14 October 2020 10:45:33 Pali Rohár wrote:
> On Wednesday 14 October 2020 10:37:57 Andre Heider wrote:
> > On 14/10/2020 10:21, Pali Rohár wrote:
> >
> >
> >
> > > > > diff --git a/doc/README.marvell b/doc/README.marvell
> > > > > index 5416bc3035..be07f31f8c 100644
> > > > > ---
Hi Sean,
On Mon, 12 Oct 2020 at 10:56, Sean Anderson wrote:
>
> On 10/11/20 11:35 PM, Simon Glass wrote:
> > On Sat, 10 Oct 2020 at 13:43, Sean Anderson wrote:
> >>
> >> Checkpatch complains about using #ifdef for CONFIG variables.
> >>
> >> Signed-off-by: Sean Anderson
> >> ---
> >>
> >> (no
In order to be able to run the I2C bus at 400Khz, the chip errata[1]
recommends that the peripheral clock runs out of the 24MHz oscillator.
[1] Rev 2, 10/2019, ERR007805
Signed-off-by: Jorge Ramirez-Ortiz
---
arch/arm/mach-imx/mx6/soc.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
Hi Bin,
On Sun, 27 Sep 2020 at 22:26, Simon Glass wrote:
>
> Add definitions for part of the vboot context used with verified boot.
>
> Signed-off-by: Simon Glass
> ---
>
> arch/x86/include/asm/acpi/vbnv_layout.h | 38 +
> 1 file changed, 38 insertions(+)
> create mode
On 10/14/20 2:29 PM, Chunfeng Yun wrote:
> On Wed, 2020-10-14 at 12:56 +0200, Marek Vasut wrote:
>> On 10/14/20 10:50 AM, Chunfeng Yun wrote:
>>> This patch adds support for the MediaTek USB3 DRD controller,
>>> its host side is based on xHCI, this driver supports device mode
>>> and host mode.
>>
On Wed, 2020-10-14 at 15:01 +0200, Marek Vasut wrote:
> On 10/14/20 2:54 PM, Chunfeng Yun wrote:
> > Set CONFIG_USB_MTU3_GADGET=y to enable device mode explicitly,
> > try to avoid build error:
> > "undefined reference to `dm_usb_gadget_handle_interrupts'"
> >
> > Fixes: 764751784727 ("configs:
On 10/14/20 2:54 PM, Chunfeng Yun wrote:
> Set CONFIG_USB_MTU3_GADGET=y to enable device mode explicitly,
> try to avoid build error:
> "undefined reference to `dm_usb_gadget_handle_interrupts'"
>
> Fixes: 764751784727 ("configs: mt8512: enable fastboot and USB host related
> configs")
Should I
Set CONFIG_USB_MTU3_GADGET=y to enable device mode explicitly,
try to avoid build error:
"undefined reference to `dm_usb_gadget_handle_interrupts'"
Fixes: 764751784727 ("configs: mt8512: enable fastboot and USB host related
configs")
Signed-off-by: Chunfeng Yun
---
v2: change fixes info
On Wed, 2020-10-14 at 20:33 +0800, Bin Meng wrote:
> On Wed, Oct 14, 2020 at 8:24 PM Chunfeng Yun
> wrote:
> >
> > Set CONFIG_USB_MTU3_GADGET=y to enable it explicitly,
> > try to avoid build error:
> > "undefined reference to `dm_usb_gadget_handle_interrupts'"
> >
> > fixes: 311412ead0
Hi Vabhav,
On 14.10.20 13:15, Vabhav Sharma (OSS) wrote:
Hi Stefan,
Sorry for delayed reply, Occupied with high priority task
-Original Message-
From: Stefan Roese
Sent: Wednesday, September 30, 2020 10:46 AM
To: Vabhav Sharma (OSS) ;
andre.przyw...@arm.com; u-boot@lists.denx.de;
On Wed, Oct 14, 2020 at 8:24 PM Chunfeng Yun wrote:
>
> Set CONFIG_USB_MTU3_GADGET=y to enable it explicitly,
> try to avoid build error:
> "undefined reference to `dm_usb_gadget_handle_interrupts'"
>
> fixes: 311412ead0 ("configs: mt8512: enable fastboot and USB host related
> configs")
This
On Wed, 2020-10-14 at 12:56 +0200, Marek Vasut wrote:
> On 10/14/20 10:50 AM, Chunfeng Yun wrote:
> > This patch adds support for the MediaTek USB3 DRD controller,
> > its host side is based on xHCI, this driver supports device mode
> > and host mode.
>
> This patch doesn't seem to apply to
Hi Simon,
Apology for delayed reply, Got occupied due to other business deliverables
> -Original Message-
> From: Simon Glass
> Sent: Wednesday, September 30, 2020 10:15 PM
> To: Vabhav Sharma (OSS)
> Cc: Andre Przywara ; U-Boot Mailing List b...@lists.denx.de>; Stefan Roese ; Vabhav
Hi Stefan,
Sorry for delayed reply, Occupied with high priority task
> -Original Message-
> From: Stefan Roese
> Sent: Wednesday, September 30, 2020 10:46 AM
> To: Vabhav Sharma (OSS) ;
> andre.przyw...@arm.com; u-boot@lists.denx.de; s...@chromium.org
> Cc: Vabhav Sharma
> Subject: Re:
On 11.10.20 14:13, Dario Binacchi wrote:
> The series was born from the need to manage the PWM backlight of the
> display connected to my beaglebone board. To hit the target, I had to
> develop drivers for PWM management which in turn relied on drivers for
> managing timers and clocks, all
On 26.08.20 14:37, Stefan Roese wrote:
From: Suneel Garapati
Adds support for Network Interface controllers found on
OcteonTX2 SoC platforms.
Signed-off-by: Suneel Garapati
Signed-off-by: Stefan Roese
Cc: Joe Hershberger
---
Series-changes: 3
- Add SoB from Stefan
- Remove spdx.org line
From: Joseph Chen
Extend rockchip efuse driver with support for RK3328 non-secure efuse.
Signed-off-by: Joseph Chen
Signed-off-by: Jonas Karlman
---
drivers/misc/rockchip-efuse.c | 67 +++
1 file changed, 67 insertions(+)
diff --git
Set CONFIG_USB_MTU3_GADGET=y to enable it explicitly,
try to avoid build error:
"undefined reference to `dm_usb_gadget_handle_interrupts'"
fixes: 311412ead0 ("configs: mt8512: enable fastboot and USB host related
configs")
Signed-off-by: Chunfeng Yun
---
configs/mt8512_bm1_emmc_defconfig | 1
Enable efuse node so that boards can use cpu id in efuse as a source for
serial# and ethaddr.
Signed-off-by: Jonas Karlman
---
arch/arm/dts/rk3288.dtsi | 3 +--
1 file changed, 1 insertion(+), 2 deletions(-)
diff --git a/arch/arm/dts/rk3288.dtsi b/arch/arm/dts/rk3288.dtsi
index
From: Francis Fan
Extend rockchip efuse driver with support for RK3288 non-secure efuse.
Signed-off-by: Francis Fan
Signed-off-by: Cody Xie
Signed-off-by: Jonas Karlman
---
drivers/misc/rockchip-efuse.c | 91 +--
1 file changed, 87 insertions(+), 4
This extends rockchip efuse driver with support for RK3288 and RK3328.
Patch 1 and 2 was picked from vendor u-boot and updated to work with
mainline u-boot.
Patch 3 updates and enable the efuse node in rk3288.dtsi.
This makes it possible to get a persisted ethaddr using:
CONFIG_MISC=y
Fix "ram" typos for serial flash
Signed-off-by: Chance.Yang
---
doc/README.dfu | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/doc/README.dfu b/doc/README.dfu
index 4b9f883540..be53b5b393 100644
--- a/doc/README.dfu
+++ b/doc/README.dfu
@@ -121,7 +121,7 @@ Commands:
"sf"
Hi Marek,
> Subject: Re: [PATCH v2 3/5] pinctrl: renesas: r8a77965: Add R8A774B1 PFC
> support
>
> On 10/13/20 8:30 PM, Biju Das wrote:
>
> Hi,
>
> [...]
>
> On 10/13/20 10:52 AM, Biju Das wrote:
> > Renesas RZ/G2N (r8a774b1) is pin compatible with R-Car M3-N
> > (r8a77965),
On 10/14/20 10:50 AM, Chunfeng Yun wrote:
> This patch adds support for the MediaTek USB3 DRD controller,
> its host side is based on xHCI, this driver supports device mode
> and host mode.
This patch doesn't seem to apply to u-boot-usb/next , and also,
u-boot-usb/next does not build:
From: T Karthik Reddy
Remove unused variable 'count' which is causing warning while
compilation.
Signed-off-by: T Karthik Reddy
Signed-off-by: Michal Simek
---
drivers/spi/xilinx_spi.c | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)
diff --git a/drivers/spi/xilinx_spi.c
Activate the logging features in SPL and U-Boot
(CONFIG_LOG and CONFIG_SPL_LOG) and the command 'log' with
CONFIG_CMD_LOG.
Signed-off-by: Patrick Delaunay
---
configs/stm32mp15_basic_defconfig | 2 ++
configs/stm32mp15_trusted_defconfig | 1 +
2 files changed, 3 insertions(+)
diff --git
Change pr_* to dev_ or log_ macro and define LOG_CATEGORY.
Signed-off-by: Patrick Delaunay
---
board/st/common/stm32mp_dfu.c | 3 ++-
board/st/common/stm32mp_mtdparts.c | 5 +++--
board/st/common/stpmic1.c | 5 -
board/st/common/stusb160x.c| 2 ++
4 files changed, 11
Change pr_* to dev_ or log_ macro and define LOG_CATEGORY.
Signed-off-by: Patrick Delaunay
---
board/st/stm32mp1/stm32mp1.c | 134 +--
1 file changed, 65 insertions(+), 69 deletions(-)
diff --git a/board/st/stm32mp1/stm32mp1.c b/board/st/stm32mp1/stm32mp1.c
Change pr_* to dev_ or log_ macro and define LOG_CATEGORY.
Signed-off-by: Patrick Delaunay
---
drivers/mtd/nand/raw/stm32_fmc2_nand.c | 40 --
1 file changed, 19 insertions(+), 21 deletions(-)
diff --git a/drivers/mtd/nand/raw/stm32_fmc2_nand.c
Change pr_* to dev_ or log_ macro and define LOG_CATEGORY.
Signed-off-by: Patrick Delaunay
---
drivers/video/stm32/stm32_ltdc.c | 33 +---
1 file changed, 18 insertions(+), 15 deletions(-)
diff --git a/drivers/video/stm32/stm32_ltdc.c
Change debug/pr_* to log_* or dev_* macro and define LOG_CATEGORY.
Remove the "%s:" __func__ header as it is managed by dev macro
(dev->name is displayed) or log macro (CONFIG_LOGF_FUNC).
Signed-off-by: Patrick Delaunay
---
drivers/spi/stm32_qspi.c | 46
Define LOG_CATEGORY to allow filtering with log command.
Signed-off-by: Patrick Delaunay
---
drivers/serial/serial_stm32.c | 3 +++
1 file changed, 3 insertions(+)
diff --git a/drivers/serial/serial_stm32.c b/drivers/serial/serial_stm32.c
index cab0db2c96..f5450f4ea9 100644
---
Change pr_* to dev_ or log_ macro and define LOG_CATEGORY.
Signed-off-by: Patrick Delaunay
---
drivers/video/stm32/stm32_dsi.c | 18 ++
1 file changed, 10 insertions(+), 8 deletions(-)
diff --git a/drivers/video/stm32/stm32_dsi.c b/drivers/video/stm32/stm32_dsi.c
index
Change debug to dev_dbg macro and define LOG_CATEGORY.
Remove the "%s:" __func__ header as it is managed by dev macro
(dev->name is displayed) or log macro (CONFIG_LOGF_FUNC).
Signed-off-by: Patrick Delaunay
---
drivers/mailbox/stm32-ipcc.c | 16 +---
1 file changed, 9
Change pr_debug to log_debug or dev_dbg macro and define LOG_CATEGORY.
Remove the "%s:" __func__ header as it is managed by dev macro
(dev->name is displayed) or log macro (CONFIG_LOGF_FUNC).
Signed-off-by: Patrick Delaunay
---
drivers/phy/phy-stm32-usbphyc.c | 18 ++
1 file
Change debug to dev_dbg macro and define LOG_CATEGORY.
Remove the "%s:" __func__ header as it is managed by dev macro
(dev->name is displayed) or log macro (CONFIG_LOGF_FUNC).
Signed-off-by: Patrick Delaunay
---
drivers/i2c/stm32f7_i2c.c | 74 +++
1 file
Change debug to dev_dbg macro and define LOG_CATEGORY.
Remove the "%s:" __func__ header as it is managed by dev macro
(dev->name is displayed).
Signed-off-by: Patrick Delaunay
---
drivers/reset/stm32-reset.c | 13 +
1 file changed, 9 insertions(+), 4 deletions(-)
diff --git
Change pr_* to dev_ or log_ macro and define LOG_CATEGORY.
Signed-off-by: Patrick Delaunay
---
drivers/memory/stm32-fmc2-ebi.c | 30 --
1 file changed, 16 insertions(+), 14 deletions(-)
diff --git a/drivers/memory/stm32-fmc2-ebi.c b/drivers/memory/stm32-fmc2-ebi.c
Change debug/pr_debug to log_debug or dev_dbg macro and
define LOG_CATEGORY.
Remove the "%s:" __func__ header as it is managed by dev macro
(dev->name is displayed) or log macro (CONFIG_LOGF_FUNC).
Signed-off-by: Patrick Delaunay
---
drivers/spi/stm32_spi.c | 31
Change debug and pr_ macro to dev macro and define LOG_CATEGORY.
Remove the "%s:" __func__ header as it is managed by dev macro
(dev->name is displayed) or log macro (CONFIG_LOGF_FUNC).
Signed-off-by: Patrick Delaunay
---
drivers/clk/clk_stm32f.c | 39 ---
Change debug and pr_ macro to dev macro and define LOG_CATEGORY.
Remove the "%s:" __func__ header as it is managed by dev macro
(dev->name is displayed) or log macro (CONFIG_LOGF_FUNC).
Signed-off-by: Patrick Delaunay
---
drivers/clk/clk_stm32mp1.c | 147 ++---
Define LOG_CATEGORY, use dev_ macro when it is possible
and migrate other trace to log_ macro.
Signed-off-by: Patrick Delaunay
---
drivers/ram/stm32mp1/stm32mp1_ddr.c | 36 +++---
drivers/ram/stm32mp1/stm32mp1_interactive.c | 4 +-
drivers/ram/stm32mp1/stm32mp1_ram.c | 37
Update the name associated with the RCC drivers to avoid
duplicated name with the driver name.
With this patch the traces displayed with log macro provide a
correct device name.
The rcc device name before the patch is:
Class Index Probed DriverName
Change debug and pr_ macro to dev macro and define LOG_CATEGORY.
Remove the "%s:" __func__ header as it is managed by dev macro
(dev->name is displayed) or log macro (CONFIG_LOGF_FUNC).
Signed-off-by: Patrick Delaunay
---
drivers/clk/clk_stm32h7.c | 70 +--
1 - 100 of 185 matches
Mail list logo
