Hoi,
>> the thing with only checking !TXEMPTY is that it limits the fifo to one byte
>> only; and as far as i understood, drivermodel >code is supposed to return
>> immediately and t
>
>Why does it limit the FIFO to one byte only? The FIFO has 32 bytes.
>
we're in putc, so dealing with one
U-Boot has some particular challenges with device tree and devices:
- U-Boot has multiple build phases, such as a Secondary Program Loader
(SPL) phase which typically runs in a pre-SDRAM environment where code
and data space are limited. In particular, there may not be enough
space for the
On Tue, 1 Nov 2022 at 17:42, Pali Rohár wrote:
>
> This reverts commit d2e64d29c44dee6d455f7705dd1cf1af8674ad9a.
>
> This commit broke support for pound sign (£) and euro sign (€) keys on
> Nokia N900 keypad.
>
> Signed-off-by: Pali Rohár
> ---
> common/cli_readline.c | 6 ++
> 1 file
Add continuous read mode flag to the devices support continuous read
mode in ID table.
Signed-off-by: Leo Yu
---
drivers/mtd/nand/spi/macronix.c | 10 +-
1 file changed, 5 insertions(+), 5 deletions(-)
diff --git a/drivers/mtd/nand/spi/macronix.c b/drivers/mtd/nand/spi/macronix.c
index
The flow of continuous read operation is: firstly, starting
with the page read command and the 1st page data will be
read into the cache after the read latency tRD. Secondly,
issuing the Read From Cache commands (03h/0Bh/3Bh/6Bh/BBh/EBh)
to read out the data from cache continuously. After all the
This patch bypasses the limitation of length for read operations
in MTD test module. Thus, the total length of a read operation
can be passed down to the continuous read operation in SPI NAND
layer.
Signed-off-by: Leo Yu
---
cmd/mtd.c | 2 ++
1 file changed, 2 insertions(+)
diff --git
Add continuous read mode status and initialize the default status
to false.
Signed-off-by: Leo Yu
---
drivers/mtd/nand/spi/core.c | 8
include/linux/mtd/spinand.h | 3 +++
2 files changed, 11 insertions(+)
diff --git a/drivers/mtd/nand/spi/core.c b/drivers/mtd/nand/spi/core.c
index
This patch sets the "CONT" bit in the configuration register
and adds a flag for identifying continuous read mode capability.
Signed-off-by: Leo Yu
---
drivers/mtd/nand/spi/core.c | 12
include/linux/mtd/spinand.h | 2 ++
2 files changed, 14 insertions(+)
diff --git
Leo Yu (5):
mtd: spinand: Add continuous read mode configuration
mtd: spinand: Add continuous read mode initialization
cmd: mtd: Add total length of read operation
mtd: spinand: Add continuous read operation
mtd: spinand: macronix: Add continuous read mode flag for devices
cmd/mtd.c
Hey Pali,
Thanks for letting me know about it!
I will prepare new version tomorrow and send it as v2.
Regards,
Josef
On 01. 11. 22 23:07, Pali Rohár wrote:
+ Lukáš and Josef from CZ.NIC
On Monday 03 October 2022 22:25:05 Pali Rohár wrote:
+ Štěpán from CZ.NIC. Please look at the Heinrich
Hi all,
Thanks for CCing me, Andre.
On 11/1/22 13:15, Andre Przywara wrote:
> On Mon, 31 Oct 2022 15:43:01 -0400
> Tom Rini wrote:
>
> Hi Tom, Simon,
>
>> On Mon, Oct 31, 2022 at 01:27:06PM -0600, Simon Glass wrote:
>>> Hi Tom,
>>>
>>> On Sun, 30 Oct 2022 at 11:53, Tom Rini wrote:
On Friday 21 October 2022 21:09:55 Pali Rohár wrote:
> On Thursday 20 October 2022 22:06:58 Pali Rohár wrote:
> > On Monday 10 October 2022 23:30:21 Sicelo wrote:
> > > On Sun, Oct 09, 2022 at 09:33:17PM +0200, Pali Rohár wrote:
> > > > Hello!
> > > >
> > > > Current u-boot from master branch
This reverts commit d2e64d29c44dee6d455f7705dd1cf1af8674ad9a.
This commit broke support for pound sign (£) and euro sign (€) keys on
Nokia N900 keypad.
Signed-off-by: Pali Rohár
---
common/cli_readline.c | 6 ++
1 file changed, 2 insertions(+), 4 deletions(-)
diff --git
On Tue, Nov 01, 2022 at 11:58:48PM +0100, Pali Rohár wrote:
> On Sunday 09 October 2022 15:03:03 Pali Rohár wrote:
> > On Wednesday 27 July 2022 15:08:05 Tom Rini wrote:
> > > On Wed, Jul 27, 2022 at 09:01:15PM +0200, Pali Rohár wrote:
> > > > On Wednesday 27 July 2022 14:58:20 Tom Rini wrote:
> >
On Sun, 7 Aug 2022 at 13:59, Pali Rohár wrote:
>
> Return value -1 cause U-Boot to print usage message. Return value
> 1 (CMD_RET_FAILURE) indicates failure. So fix return value when ubifs
> command starts it execution and fails.
>
> Signed-off-by: Pali Rohár
> ---
> cmd/ubifs.c | 8
>
Hi Pali,
On Tue, 1 Nov 2022 at 17:08, Pali Rohár wrote:
>
> On Sunday 09 October 2022 17:19:50 Pali Rohár wrote:
> > Hello!
> >
> > Your commit d2e64d29c44dee6d455f7705dd1cf1af8674ad9a ("cli_readline:
> > Only insert printable chars") broke support for pound sign (£) and euro
> > sign (€) keys
On Monday 10 October 2022 17:48:58 Simon Glass wrote:
> Hi,
>
> On Sun, 28 Aug 2022 at 09:19, Marek Behún wrote:
> >
> > From: Pali Rohár
> >
> > When U-Boot is running from flash memory (execute in place) then
> > gd->fdt_blob before relocation points to read-only flash memory.
> >
> > So
On Monday 10 October 2022 14:20:20 Marek Behún wrote:
> On Sun, 9 Oct 2022 12:32:02 -0400
> Tom Rini wrote:
>
> > On Sun, Oct 09, 2022 at 03:10:45PM +0200, Pali Rohár wrote:
> > > On Sunday 09 October 2022 08:45:03 Tom Rini wrote:
> > > > On Sun, Oct 09, 2022 at 02:41:19PM +0200, Pali Rohár
On Sunday 09 October 2022 17:19:50 Pali Rohár wrote:
> Hello!
>
> Your commit d2e64d29c44dee6d455f7705dd1cf1af8674ad9a ("cli_readline:
> Only insert printable chars") broke support for pound sign (£) and euro
> sign (€) keys on Nokia N900 keypad.
>
> When I press either of those two keys,
Hi Oliver,
On Tue, Oct 25, 2022 at 12:31 PM Oliver Graute wrote:
> Now Running into this issue:
>
> MKIMAGE u-boot.img
> MKIMAGE u-boot-dtb.img
> LD u-boot.elf
> make[1]: Für das Ziel „SPL“ ist nichts zu tun.
> BINMAN all
> binman: Section '/binman/u-boot-spl-ddr': Symbol
>
On Sunday 09 October 2022 15:03:03 Pali Rohár wrote:
> On Wednesday 27 July 2022 15:08:05 Tom Rini wrote:
> > On Wed, Jul 27, 2022 at 09:01:15PM +0200, Pali Rohár wrote:
> > > On Wednesday 27 July 2022 14:58:20 Tom Rini wrote:
> > > > On Wed, Jul 27, 2022 at 08:52:01PM +0200, Pali Rohár wrote:
> >
On Sunday 09 October 2022 14:34:55 Pali Rohár wrote:
> On Friday 02 September 2022 21:56:07 Pali Rohár wrote:
> > On Wednesday 03 August 2022 08:48:39 Stefan Roese wrote:
> > > On 02.08.22 12:06, Pali Rohár wrote:
> > > > Remove identify wrapper functions.
> > > >
> > > > Signed-off-by: Pali
PING?
On Sunday 09 October 2022 14:28:19 Pali Rohár wrote:
> PING?
>
> On Wednesday 03 August 2022 13:20:49 Pali Rohár wrote:
> > kmcent2-u-boot.dtsi file contains copy of powerpc u-boot.dtsi binman file.
> > So remove code duplication and replace it by including u-boot.dtsi file.
> >
> >
Enable insertion of version variable into U-Boot environment on DHSOM,
to make it possible to check U-Boot version e.g. in U-Boot scripts.
Signed-off-by: Marek Vasut
---
Cc: Fabio Estevam
Cc: Peng Fan
Cc: Stefano Babic
Cc: uboot-imx
---
configs/dh_imx6_defconfig | 1 +
1 file changed, 1
On Wednesday 07 September 2022 11:24:58 Pali Rohár wrote:
> On Wednesday 17 August 2022 23:00:43 Pali Rohár wrote:
> > On Wednesday 17 August 2022 12:05:20 Stefan Roese wrote:
> > > On 17.08.22 11:59, Pali Rohár wrote:
> > > > File name with pattern u-boot-spl* is used on all places except in kwb
Enable insertion of version variable into U-Boot environment on DHSOM,
to make it possible to check U-Boot version e.g. in U-Boot scripts.
Signed-off-by: Marek Vasut
---
Cc: Patrice Chotard
Cc: Patrick Delaunay
---
configs/stm32mp15_dhcom_basic_defconfig | 1 +
PING again
On Sunday 09 October 2022 13:30:26 Pali Rohár wrote:
> PING again after more than one month.
>
> On Thursday 25 August 2022 15:53:32 Pali Rohár wrote:
> > PING? Who can review and take this patch? It is needed for more boards
> > due to increasing size of u-boot binary.
> >
> > On
ping?
On Sunday 09 October 2022 13:18:47 Pali Rohár wrote:
> PING?
>
> On Sunday 07 August 2022 21:58:56 Pali Rohár wrote:
> > Return value -1 cause U-Boot to print usage message. Return value
> > 1 (CMD_RET_FAILURE) indicates failure. So fix return value when ubifs
> > command starts it
+ Lukáš and Josef from CZ.NIC
On Monday 03 October 2022 22:25:05 Pali Rohár wrote:
> + Štěpán from CZ.NIC. Please look at the Heinrich comments below and
> prepare a new version with fixes... I will let it to you right now.
>
> On Monday 26 September 2022 13:30:02 Heinrich Schuchardt wrote:
> >
Johannes,
On Wed, Oct 26, 2022 at 7:23 PM SCHNEIDER Johannes
wrote:
>
> Hi
>
> the thing with only checking !TXEMPTY is that it limits the fifo to one byte
> only; and as far as i understood, drivermodel code is supposed to return
> immediately and t
Why does it limit the FIFO to one byte
On Tue, Nov 01, 2022 at 08:55:09PM +0100, Pali Rohár wrote:
> On Tuesday 01 November 2022 15:48:34 Tom Rini wrote:
> > On Tue, Nov 01, 2022 at 06:35:04PM +0100, Pali Rohár wrote:
> > > On Monday 31 October 2022 11:51:45 Max Krummenacher wrote:
> > > > On Fri, Oct 28, 2022 at 6:40 PM Pali Rohár
On Tuesday 01 November 2022 15:48:34 Tom Rini wrote:
> On Tue, Nov 01, 2022 at 06:35:04PM +0100, Pali Rohár wrote:
> > On Monday 31 October 2022 11:51:45 Max Krummenacher wrote:
> > > On Fri, Oct 28, 2022 at 6:40 PM Pali Rohár wrote:
> > > > On Friday 28 October 2022 18:18:49 Max Krummenacher
On Tue, Nov 01, 2022 at 06:35:04PM +0100, Pali Rohár wrote:
> On Monday 31 October 2022 11:51:45 Max Krummenacher wrote:
> > On Fri, Oct 28, 2022 at 6:40 PM Pali Rohár wrote:
> > > On Friday 28 October 2022 18:18:49 Max Krummenacher wrote:
> > > > quiet_cmd_genenv = GENENV $@
> > > >
Hi Heinrich,
On Tue, 1 Nov 2022 at 03:03, Heinrich Schuchardt
wrote:
>
>
>
> On 11/1/22 00:52, Simon Glass wrote:
> > Hi Heinrich,
> >
> > On Mon, 31 Oct 2022 at 15:58, Heinrich Schuchardt
> > wrote:
> >>
> >>
> >>
> >> On 10/31/22 20:27, Simon Glass wrote:
> >>> Hi Heinrich,
> >>>
> >>> On
Hi Tom,
On Tue, 1 Nov 2022 at 07:31, Tom Rini wrote:
>
> On Mon, Oct 31, 2022 at 07:59:42PM +0200, Ilias Apalodimas wrote:
> > Hi Sughosh,
> >
> > Ideally this would be better of as a different FMP, but I understand we are
> > missing some information (the capsule header) on the FMP level.
> >
>
Enables the use of for, while and until loops for command line as
well as with run_command().
Signed-off-by: Francis Laniel
Reviewed-by: Simon Glass
---
common/cli_hush_2021.c | 1 +
common/cli_hush_upstream.c | 15 ++-
2 files changed, 15 insertions(+), 1 deletion(-)
diff
For the moment, the menu contains only entry: HUSH_OLD_PARSER which is the
default.
The goal is to prepare the field to add a new hush parser which guarantees
actual behavior is still correct.
Signed-off-by: Francis Laniel
---
cmd/Kconfig | 21 +
common/Makefile | 3 ++-
If one defines HUSH_2021_PARSER, it is then possible to use 2021 parser with:
=> parser get
old
=> parser set 2021
2021> parser get
2021
Signed-off-by: Francis Laniel
---
cmd/parser.c | 7 -
common/cli.c | 38 +++
This command can be used to print the current parser with 'parser print'.
It can also be used to set the current parser with 'parser set'.
For the moment, only one value is valid for set: old.
Signed-off-by: Francis Laniel
---
cmd/Makefile | 2 +
cmd/parser.c | 120
Adds support for "if then else" construct both for command line interface and
through run_command().
Signed-off-by: Francis Laniel
Reviewed-by: Simon Glass
---
common/cli_hush_2021.c | 11 +++
common/cli_hush_upstream.c | 12
2 files changed, 15 insertions(+), 8
Modifies the expected result for hush 2021.
Indeed, there were bugs in actual U-Boot hush which were fixed in upstream
Busybox.
As hush 2021 is based on upstream Busybox, these bugs no longer exist.
Signed-off-by: Francis Laniel
---
test/hush/list.c | 69
Modifies the expected result for hush 2021.
Indeed, there were bugs in actual U-Boot hush which were fixed in upstream
Busybox.
As hush 2021 is based on upstream Busybox, these bugs no longer exist.
Signed-off-by: Francis Laniel
---
test/hush/dollar.c | 79
Modifies the command run for hush 2021 when using string comparison operator.
Indeed, '<' and '>' must be escaped to be used as these operators.
Signed-off-by: Francis Laniel
---
test/hush/if.c | 45 +
1 file changed, 45 insertions(+)
diff --git
Modifies return code got from while loop as hush 2021 always returns 0 from
while loop.
Signed-off-by: Francis Laniel
---
test/hush/loop.c | 34 ++
1 file changed, 30 insertions(+), 4 deletions(-)
diff --git a/test/hush/loop.c b/test/hush/loop.c
index
This commit adds the following hush busybox upstream commits:
7d1c7d833785 ("ash,hush: use HOME for tab completion and prompts")
21afddefd258 ("hush: fix "error: invalid preprocessing directive ##"")
e53c7dbafc78 ("hush: fix set -n to act immediately, not just after run_list()
")
574b9c446da1
This commit set CONFIG_HUSH_PARSER_2021 as the default to trigger the CI with
this parser.
Nonetheless, Some boards are not compatible with new 2021 hush parser:
1. rcar3_ulcb:
When built with CONFIG_HUSH_PARSER_2021, the u-boot.img file size
exceeds the 1MB file limit of 890
Enables variables expansion for hush 2021, both for local and environment
variables.
So the following commands:
foo=bar
echo $foo
setenv bar foo
echo $bar
leads to "bar" and "foo" being printed on console output.
Signed-off-by: Francis Laniel
Reviewed-by: Simon Glass
---
common/cli_hush_2021.c
Enables using, in code, hush 2021 as parser for run_command function family.
It also enables the command run to be used by CLI user of hush 2021.
Signed-off-by: Francis Laniel
---
common/cli.c | 63 --
common/cli_hush_upstream.c | 2 +-
2 files
run_command() is called internally by the command run and it can also be called
directly from U-Boot code, e.g. to do unit tests.
This commit adds this path to go to hush 2021.
Signed-off-by: Francis Laniel
Reviewed-by: Simon Glass
---
common/cli_hush_upstream.c | 66
This flag is used to indicate we are using the hush parser.
Signed-off-by: Francis Laniel
---
common/cli.c | 2 ++
include/asm-generic/global_data.h | 4
2 files changed, 6 insertions(+)
diff --git a/common/cli.c b/common/cli.c
index a47d6a3f2b..cfcf4a585b 100644
---
Adds new file cli_hush_2021.c, it is a copy of Busybox hush file as it was of
time to commit 37460f5da.
This commit modifies Busybox hush to not compile some part specific to Busybox
and adds some code needed by U-Boot.
The modifications consists mainly on adding code #if(n)def guards.
For the
The added tests verifies correct behavior of for, while and until loops.
Signed-off-by: Francis Laniel
Reviewed-by: Simon Glass
---
test/hush/Makefile | 1 +
test/hush/loop.c | 65 ++
2 files changed, 66 insertions(+)
create mode 100644
Verifies shell variables are replaced by their values.
Signed-off-by: Francis Laniel
---
test/hush/Makefile | 1 +
test/hush/dollar.c | 167 +++
test/py/tests/test_ut.py | 8 +-
3 files changed, 175 insertions(+), 1 deletion(-)
create mode
Verifies behavior of commands separated by ';', '&&' and '||'.
Signed-off-by: Francis Laniel
Reviewed-by: Simon Glass
---
test/hush/Makefile | 1 +
test/hush/list.c | 79 ++
2 files changed, 80 insertions(+)
create mode 100644 test/hush/list.c
ce40f44eb336 ("test: hush: Test hush if/else") translated this test to a C test,
so this python file is no more needed.
Signed-off-by: Francis Laniel
Reviewed-by: Simon Glass
---
test/py/tests/test_hush_if_test.py | 184 -
1 file changed, 184 deletions(-)
delete
As asked in commit 9c6bf1715f6a ("test/py: hush_if_test: Add tests to cover
octal/hex values"), this commit translates test_hush_if_test.py to a C test.
Signed-off-by: Francis Laniel
Reviewed-by: Simon Glass
---
test/hush/Makefile | 1 +
test/hush/if.c | 308
Introduce a new subcommand to ut: ut hush.
For the moment, this command does nothing, future commits will add tests which
will be run on command call.
Note that CONFIG_HUSH_PARSER must be defined to compile this new subcommand.
Signed-off-by: Francis Laniel
Reviewed-by: Simon Glass
---
Hi.
Before presenting this contribution, I would like to pay homage to Wolfgang Denk
for his work on the U-Boot project.
Moreover, first versions of this series received valued feedback from him and
he also contributed to the discussion which leaded to this patchset.
During 2021 summer, Sean
On Mon, 31 Oct 2022 15:43:01 -0400
Tom Rini wrote:
Hi Tom, Simon,
> On Mon, Oct 31, 2022 at 01:27:06PM -0600, Simon Glass wrote:
> > Hi Tom,
> >
> > On Sun, 30 Oct 2022 at 11:53, Tom Rini wrote:
> > >
> > > On Sat, Oct 29, 2022 at 07:44:01PM -0600, Simon Glass wrote:
> > > > Hi Tom,
> > >
On Monday 31 October 2022 11:51:45 Max Krummenacher wrote:
> On Fri, Oct 28, 2022 at 6:40 PM Pali Rohár wrote:
> > On Friday 28 October 2022 18:18:49 Max Krummenacher wrote:
> > > quiet_cmd_genenv = GENENV $@
> > > -cmd_genenv = $(OBJCOPY) --dump-section .rodata.default_environment=$@
> > >
On Fri, Oct 21, 2022 at 06:15:54PM +0530, Sughosh Ganu wrote:
> Add bindings needed for accessing the FWU metadata partitions. These
> include the compatible string which point to the access method and the
> actual device which stores the FWU metadata.
>
> The current patch adds basic bindings
On Fri, Oct 21, 2022 at 01:34:04PM -0400, Tom Rini wrote:
> On Tue, Oct 18, 2022 at 02:15:47PM -0400, Sean Anderson wrote:
> > When sending out this email, I noticed that Ashish's (LS1088 board
> > maintainer) email also bounces.
> >
> > --Sean
> >
> > On 10/18/22 2:12 PM, Sean Anderson wrote:
>
* BASH code should be labeled as such.
* Code blocks should be indented by 4 spaces.
Fix these here.
Suggested-by: Heinrich Schuchardt
Signed-off-by: Andrew Davis
---
Changes from v1:
- New patch with fixes suggested by Heinrich
doc/board/ti/j721e_evm.rst | 24
1
J721e needs DM firmware when using updated SYSFW. Add steps to fetch,
build, and deploy the same.
Signed-off-by: Andrew Davis
---
Changes from v1:
- None
doc/board/ti/j721e_evm.rst | 16 ++--
1 file changed, 10 insertions(+), 6 deletions(-)
diff --git
On Mon, Oct 31, 2022 at 11:51:45AM +0100, Max Krummenacher wrote:
> Hi
>
> On Fri, Oct 28, 2022 at 6:40 PM Pali Rohár wrote:
> >
> > Hello! This is really much better solution! Few comments are below.
> >
> > On Friday 28 October 2022 18:18:49 Max Krummenacher wrote:
> > > From: Max Krummenacher
On 10/7/22 6:47 PM, Heinrich Schuchardt wrote:
On 10/7/22 22:37, Andrew Davis wrote:
J721e needs DM firmware when using updated SYSFW. Add steps to fetch,
build, and deploy the same.
Signed-off-by: Andrew Davis
---
doc/board/ti/j721e_evm.rst | 16 ++--
1 file changed, 10
On Mon, Oct 31, 2022 at 07:59:42PM +0200, Ilias Apalodimas wrote:
> Hi Sughosh,
>
> Ideally this would be better of as a different FMP, but I understand we are
> missing some information (the capsule header) on the FMP level.
>
> I think we can include it as is for now and have another look
Both PCS/PMA PHY and the external PHY need to have a valid link status
in order to have Ethernet traffic. Check and wait this status at
setup_phy() so that we could diagnose if there is a PHY issue.
Signed-off-by: Andy Chiu
Reviewed-by: Greentime Hu
---
drivers/net/xilinx_axi_emac.c | 44
If we bridge an external PHY to Xilinx's PCS/PMA PHY and would like to
get and set the real status of the PHY facing the external world. Then
we should phy_connect() to the external PHY instead of the PCS/PMA one.
Thus, we add a pcs-handle DT entry, which have been merged in Linux, and
leave the
If both PCS/PMA PHY and an external PHY are pressent on the Ethernet,
then the real link status should point to the external facing PHY. At
the same time, we must ensure the link status of the PCS/PMA PHY is good
before transmitting packets.
Change Log:
--- v2 ---
1. Fix typo: use pcs-handle
On 11/1/22 00:52, Simon Glass wrote:
Hi Heinrich,
On Mon, 31 Oct 2022 at 15:58, Heinrich Schuchardt
wrote:
On 10/31/22 20:27, Simon Glass wrote:
Hi Heinrich,
On Sat, 29 Oct 2022 at 20:56, Heinrich Schuchardt
wrote:
On 10/30/22 02:43, Simon Glass wrote:
Hi Heinrich,
On Thu, 27
71 matches
Mail list logo
