Hi Tom,
On 19/06/23 18:48, Tom Rini wrote:
On Mon, Jun 19, 2023 at 03:14:01PM +0530, Nikhil M Jain wrote:
This patch series aims at mitigating warnings occurred during
compilation by including required header files and using appropriate
types for variables which are typecasted.
Nikhil M Jain
hi Simon,
On Mon, 19 Jun 2023 at 18:07, Simon Glass wrote:
>
> Hi Sughosh,
>
> On Thu, 15 Jun 2023 at 17:25, Sughosh Ganu wrote:
> >
> > hi Simon,
> >
> > On Thu, 15 Jun 2023 at 14:44, Simon Glass wrote:
> > >
> > > Hi Sughosh,
> > >
> > > On Tue, 13 Jun 2023 at 11:39, Sughosh Ganu
> > >
hi Simon,
On Mon, 19 Jun 2023 at 18:07, Simon Glass wrote:
>
> Hi Sughosh,
>
> On Thu, 15 Jun 2023 at 17:11, Sughosh Ganu wrote:
> >
> > hi Simon,
> >
> > On Thu, 15 Jun 2023 at 14:44, Simon Glass wrote:
> > >
> > > Hi Sughosh,
> > >
> > > On Tue, 13 Jun 2023 at 11:41, Sughosh Ganu
> > >
On 6/20/23 22:40, Detlev Casanova wrote:
On Tuesday, June 20, 2023 4:03:18 P.M. EDT Marek Vasut wrote:
On 6/20/23 19:49, Detlev Casanova wrote:
On Monday, June 19, 2023 5:54:44 P.M. EDT Marek Vasut wrote:
On 6/19/23 20:27, Detlev Casanova wrote:
On Monday, June 19, 2023 12:11:18 P.M. EDT
On 6/21/23 04:55, Chong, Teik Heng wrote:
-Original Message-
From: Marek Vasut
Sent: Wednesday, 21 June, 2023 9:20 AM
To: Chong, Teik Heng ; u-boot@lists.denx.de
Cc: Jagan Teki ; Vignesh R
; Simon ; Kris
; Chee, Tien Fong ; Hea,
Kok Kiang ; Lokanathan, Raaj
; Maniyam, Dinesh
; Ng, Boon
From: Sieu Mun Tang
This is for new platform enablement for agilex5.
Update binman tool for new platform.
Signed-off-by: Sieu Mun Tang
---
tools/binman/control.py | 8
1 file changed, 4 insertions(+), 4 deletions(-)
diff --git a/tools/binman/control.py b/tools/binman/control.py
This is for new platform enablement for agilex5.
Add combo phy driver for new platform.
Signed-off-by: Jit Loon Lim
---
drivers/phy/cadence/Kconfig| 9 +
drivers/phy/cadence/Makefile | 1 +
drivers/phy/cadence/phy-cadence-combophy.c | 855 +
This is for new platform enablement for agilex5.
Add in new configuration that needed to boot new platform.
Signed-off-by: Jit Loon Lim
---
arch/arm/mach-socfpga/Kconfig | 55 +
configs/socfpga_agilex5_defconfig | 2 +
configs/socfpga_agilex5_legacy_defconfig
This is for new platform enablement for agilex5.
Update watchdog timeout timer for new platform.
Signed-off-by: Jit Loon Lim
---
drivers/watchdog/Kconfig | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/watchdog/Kconfig b/drivers/watchdog/Kconfig
index
This is for new platform enablement for agilex5.
Add cold, warm reset logic for new platform.
Signed-off-by: Jit Loon Lim
---
drivers/sysreset/Kconfig| 7
drivers/sysreset/Makefile | 1 +
drivers/sysreset/sysreset_socfpga_agilex5.c | 44
This is for new platform enablement for agilex5.
Add reset driver for new platform.
Signed-off-by: Jit Loon Lim
---
drivers/reset/reset-socfpga.c | 28 +---
1 file changed, 25 insertions(+), 3 deletions(-)
diff --git a/drivers/reset/reset-socfpga.c
This is for new platform enablement for agilex5.
Add mmc and cadence host driver for new platform.
Signed-off-by: Jit Loon Lim
---
drivers/mmc/mmc.c | 27 +++---
drivers/mmc/sdhci-cadence.c | 164
2 files changed, 160 insertions(+), 31
This is for new platform enablement for agilex5.
Add new clock files for new platform.Add
Signed-off-by: Jit Loon Lim
---
drivers/clk/altera/Makefile | 1 +
drivers/clk/altera/clk-agilex5.c | 736 +++
drivers/clk/altera/clk-agilex5.h | 263 +++
3 files
This is for new platform enablement for agilex5.
Add new ddr and iossm mailbox files for new platform.Add
Signed-off-by: Jit Loon Lim
---
drivers/ddr/altera/Makefile| 5 +-
drivers/ddr/altera/iossm_mailbox.c | 786 +
drivers/ddr/altera/iossm_mailbox.h | 141
This is for new platform enablement for agilex5.
Update secure registers, Kconfig and makefile for new platform.
Signed-off-by: Jit Loon Lim
---
drivers/misc/Kconfig | 9 +++
drivers/misc/Makefile | 1 +
drivers/misc/socfpga_secreg.c | 116 ++
This is for new platform enablement for agilex5.
Add new platform defconfig for new platform.
Signed-off-by: Jit Loon Lim
---
configs/socfpga_agilex5_defconfig| 123 +++
configs/socfpga_agilex5_legacy_defconfig | 85
2 files changed, 208
This is for new platform enablement for agilex5.
Add new secure register text file for new platform.
Signed-off-by: Jit Loon Lim
---
.../misc/socfpga_secreg.txt | 397 ++
1 file changed, 397 insertions(+)
create mode 100644
This is for new platform enablement for agilex5.
Add new platform socdk and update maintainer list.
Signed-off-by: Jit Loon Lim
---
board/intel/agilex5-socdk/MAINTAINERS | 8
board/intel/agilex5-socdk/Makefile| 7 +++
board/intel/agilex5-socdk/socfpga.c | 7 +++
3 files
This is for new platform enablement for agilex5.
Add platform related header files to enable new product.
Signed-off-by: Jit Loon Lim
---
.../include/mach/base_addr_soc64.h| 43 +-
.../mach-socfpga/include/mach/clock_manager.h | 5 +-
.../include/mach/clock_manager_agilex5.h
This is for new platform enablement for agilex5.
Add platform related files to enable new product.
Signed-off-by: Jit Loon Lim
---
arch/arm/mach-socfpga/Kconfig | 37 +++
arch/arm/mach-socfpga/Makefile| 69 -
arch/arm/mach-socfpga/board.c |
This is for new platform enablement for agilex5.
Add agilex5 dtsi and dts.
Update checkpatch error for stratix10.
Signed-off-by: Jit Loon Lim
---
arch/arm/dts/Makefile | 1 +
arch/arm/dts/socfpga_agilex5-u-boot.dtsi | 459 +
This is for new platform enablement for agilex5
Signed-off-by: Jit Loon Lim
---
arch/arm/Kconfig | 5 -
1 file changed, 4 insertions(+), 1 deletion(-)
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index 99264a6478..8e36456fa8 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@
Intel Agilex5 is a midrange FPGAs optimized for applications requiring high
performance,
lower power, and smaller form factors and lower logic densities. U-Boot is one
of the
bootloader to boot along with ARM trusted Firmware to boot the board up.
*** BLURB HERE ***
Jit Loon Lim (16):
From: Teik Heng Chong
Fix the write to the HPRT register which treat W1C fields
as if they were mere RW. This leads to unintended clearing of such fields
This bug was found during the testing on Simics model. Referring to
specification DesignWare Cores USB 2.0 Hi-Speed On-The-Go (OTG)
Databook
> -Original Message-
> From: Marek Vasut
> Sent: Wednesday, 21 June, 2023 9:20 AM
> To: Chong, Teik Heng ; u-boot@lists.denx.de
> Cc: Jagan Teki ; Vignesh R
> ; Simon ; Kris
> ; Chee, Tien Fong ; Hea,
> Kok Kiang ; Lokanathan, Raaj
> ; Maniyam, Dinesh
> ; Ng, Boon Khai ;
> Yuslaimi, Alif
> From: Yanhong Wang
> Sent: Thursday, June 15, 2023 5:37 PM
> To: u-boot@lists.denx.de; Rick Jian-Zhi Chen(陳建志) ; Leo
> Yu-Chi Liang(梁育齊) ; Joe Hershberger
> ; Ramon Fried
> Cc: Yanhong Wang ; Torsten Duwe ;
> Leyfoon Tan ; samin . guo
> ; Walker Chen ; Hal
> Feng
> Subject: [PATCH v5
> From: Yanhong Wang
> Sent: Thursday, June 15, 2023 5:37 PM
> To: u-boot@lists.denx.de; Rick Jian-Zhi Chen(陳建志) ; Leo
> Yu-Chi Liang(梁育齊) ; Joe Hershberger
> ; Ramon Fried
> Cc: Yanhong Wang ; Torsten Duwe ;
> Leyfoon Tan ; samin . guo
> ; Walker Chen ; Hal
> Feng
> Subject: [PATCH v5
> From: Conor Dooley
> Sent: Thursday, June 15, 2023 6:13 PM
> To: u-boot@lists.denx.de
> Cc: Rick Jian-Zhi Chen(陳建志) ; Leo Yu-Chi Liang(梁育齊)
> ; Padmarao Begari ;
> Conor Dooley
> Subject: [PATCH v2 2/3] riscv: dts: sync mpfs-icicle devicetree with linux
>
> The "notable" disappearances are:
On 6/21/23 02:57, Chong, Teik Heng wrote:
-Original Message-
From: Marek Vasut
Sent: Wednesday, 21 June, 2023 5:38 AM
To: Chong, Teik Heng ; u-boot@lists.denx.de
Cc: Jagan Teki ; Vignesh R ; Simon ; Kris ;
Chee, Tien Fong ; Hea, Kok Kiang ; Lokanathan, Raaj ; Maniyam, Dinesh
; Ng,
-Original Message-
From: Marek Vasut
Sent: Wednesday, 21 June, 2023 5:38 AM
To: Chong, Teik Heng ; u-boot@lists.denx.de
Cc: Jagan Teki ; Vignesh R ; Simon
; Kris ; Chee, Tien
Fong ; Hea, Kok Kiang ;
Lokanathan, Raaj ; Maniyam, Dinesh
; Ng, Boon Khai ; Yuslaimi,
Alif Zakuan ; Zamri,
Add gpio-fan in the DTS and enable the GPIO in board file to start the fan
during boot.
Note that this patch depends on
https://patchwork.ozlabs.org/project/uboot/patch/20230606214539.4229-1-mibo...@gmail.com/
Signed-off-by: Tony Dinh
---
arch/arm/dts/armada-385-thecus-n2350.dts | 15
On 6/20/23 12:43, Xavier Drudis Ferran wrote:
El Tue, Jun 20, 2023 at 11:49:36AM +0200, Marek Vasut deia:
Default, see:
$ git grep CONFIG_BOOTCOMMAND configs/
I'm lost.
I called default what Kconfig used as default.
You seem to call default what's in board specific config files.
Whatever.
On Mon, Jun 19, 2023 at 1:40 PM Tim Harvey wrote:
>
> On Fri, Jun 16, 2023 at 4:52 PM Tim Harvey wrote:
> >
> > On Thu, Jun 15, 2023 at 8:31 PM Peng Fan wrote:
> > >
> > >
> > >
> > > On 6/16/2023 9:56 AM, Tim Harvey wrote:
> > > > Greetings,
> > > >
> > > > I've seen several IMX8M boards
Hi Andre,
On 6/20/23 06:42, Andre Przywara wrote:
So yeah, the request of a "Enter FEL" command came up multiple times, but
so far no one could be bothered to implement this properly. The idea would
be to have a generic command (more like "fel-reset" than efex), and
allow each SoC (family) to
On 6/20/23 15:52, teik.heng.ch...@intel.com wrote:
From: Teik Heng Chong
Fix the write to the HPRT register which treat W1C fields
as if they were mere RW. This leads to unintended clearing of such fields
Signed-off-by: Teik Heng Chong
---
V1->V2
- update subject tags to usb:dwc2
---
On Tue, Jun 20, 2023 at 08:36:11AM +0200, Michal Simek wrote:
>
>
> On 6/19/23 19:04, Eugen Hristev wrote:
> > On 6/19/23 19:07, Marek Vasut wrote:
> > > On 6/19/23 15:26, Eugen Hristev wrote:
> > > > On 5/8/23 06:00, Venkatesh Yadav Abbarapu wrote:
> > > > > [ Felipe: Ported from Linux kernel
On Tuesday, June 20, 2023 4:03:18 P.M. EDT Marek Vasut wrote:
> On 6/20/23 19:49, Detlev Casanova wrote:
> > On Monday, June 19, 2023 5:54:44 P.M. EDT Marek Vasut wrote:
> >> On 6/19/23 20:27, Detlev Casanova wrote:
> >>> On Monday, June 19, 2023 12:11:18 P.M. EDT Marek Vasut wrote:
> On
On 6/20/23 19:49, Detlev Casanova wrote:
On Monday, June 19, 2023 5:54:44 P.M. EDT Marek Vasut wrote:
On 6/19/23 20:27, Detlev Casanova wrote:
On Monday, June 19, 2023 12:11:18 P.M. EDT Marek Vasut wrote:
On 6/19/23 16:42, Detlev Casanova wrote:
On Friday, June 16, 2023 8:43:33 P.M. EDT
With some changes to our mapping files in gitdm, re-generate the last
few releases worth of statistics to correctly reflect contributions. We
only go back this far to try and find a balance between highlighting
contributions and still being reviewable.
Signed-off-by: Tom Rini
---
On 2023-05-01, Wolfgang Zarre wrote:
> If u-boot is installed on the internal emmc, then this will
> allow to boot without failure.
>
> Signed-off-by: Wolfgang Zarre
> Reviewed-by: Kever Yang
This is marked as accepted in patchwork, but I do not see it in git
yet...
Is this planned to land in
Sec proxy data buffer is 60 bytes with the last of the registers
indicating transmission completion. This however poses a bit of a
challenge.
The backing memory for sec_proxy is regular memory, and all sec proxy
does is to trigger a burst of all 60 bytes of data over to the target
thread backing
On Thu, 04 Jun 2020 16:35:15 -0400, Tom Rini wrote:
> In lan78xx_read_otp() we want to know if sig is LAN78XX_OTP_INDICATOR_1
> or LAN78XX_OTP_INDICATOR_2. In the case of matching the first one we
> set offset to itself, and clang warns about this. Rework the logic so
> that if sig is the
On Mon, 30 Jan 2023 10:21:43 +0100, Mario Kicherer wrote:
> If only FIT images are enabled and loading the FIT image fails,
> spl_nor_load_image() should return an error instead of zero.
>
> Without this patch:
>
> >>SPL: board_init_r()
> spl_init
> Trying to boot from NOR
> Unsupported OS
On Monday, June 19, 2023 5:54:44 P.M. EDT Marek Vasut wrote:
> On 6/19/23 20:27, Detlev Casanova wrote:
> > On Monday, June 19, 2023 12:11:18 P.M. EDT Marek Vasut wrote:
> >> On 6/19/23 16:42, Detlev Casanova wrote:
> >>> On Friday, June 16, 2023 8:43:33 P.M. EDT Marek Vasut wrote:
> On
Hi Jan,
On Tue, 20 Jun 2023 at 18:05, Jan Kiszka wrote:
>
> On 20.06.23 16:36, Simon Glass wrote:
> > Hi Jan,
> >
> > On Tue, 20 Jun 2023 at 11:37, Jan Kiszka wrote:
> >>
> >> On 20.06.23 12:11, Simon Glass wrote:
> >>> Hi Jan,
> >>>
> >>> On Mon, 19 Jun 2023 at 16:09, Jan Kiszka wrote:
>
On 20.06.23 16:36, Simon Glass wrote:
> Hi Jan,
>
> On Tue, 20 Jun 2023 at 11:37, Jan Kiszka wrote:
>>
>> On 20.06.23 12:11, Simon Glass wrote:
>>> Hi Jan,
>>>
>>> On Mon, 19 Jun 2023 at 16:09, Jan Kiszka wrote:
On 19.06.23 16:09, Simon Glass wrote:
> Hi Jan,
>
> On Mon,
On Tue, Jun 20, 2023 at 12:19 PM Tim Harvey wrote:
>
> There is no need to include the firmware/optee node if the optee
> driver is not enabled.
>
> Signed-off-by: Tim Harvey
Reviewed-by: Fabio Estevam
On Tue, Jun 20, 2023 at 12:19 PM Tim Harvey wrote:
>
> Move the firmware/optee node to the common imx8mp-u-boot.dtsi and
> protect it with an ifdef CONFIG_OPTEE as it is a meaningless node
> without the optee driver enabled.
>
> Signed-off-by: Tim Harvey
Reviewed-by: Fabio Estevam
On Tue, Jun 20, 2023 at 12:19 PM Tim Harvey wrote:
>
> Move the firmware/optee node to the common imx8mm-u-boot.dtsi and
> protect it with an ifdef CONFIG_OPTEE as it is a meaningless node
> without the optee driver enabled.
>
> Signed-off-by: Tim Harvey
Reviewed-by: Fabio Estevam
There is no need to include the firmware/optee node if the optee
driver is not enabled.
Signed-off-by: Tim Harvey
---
arch/arm/dts/imx8mn-u-boot.dtsi | 2 ++
1 file changed, 2 insertions(+)
diff --git a/arch/arm/dts/imx8mn-u-boot.dtsi b/arch/arm/dts/imx8mn-u-boot.dtsi
index
Move the firmware/optee node to the common imx8mp-u-boot.dtsi and
protect it with an ifdef CONFIG_OPTEE as it is a meaningless node
without the optee driver enabled.
Signed-off-by: Tim Harvey
---
arch/arm/dts/imx8mp-beacon-kit-u-boot.dtsi | 7 ---
Move the firmware/optee node to the common imx8mm-u-boot.dtsi and
protect it with an ifdef CONFIG_OPTEE as it is a meaningless node
without the optee driver enabled.
Signed-off-by: Tim Harvey
---
arch/arm/dts/imx8mm-cl-iot-gate-optee-u-boot.dtsi | 7 ---
On Mon, Jan 30, 2023 at 11:03:03AM +0100, Mario Kicherer wrote:
> On systems without a watchdog, using hang() prevents a system to
> recover from an error. For example, a board could implement a boot
> counter to switch to an alternative load address after some failed
> tries.
>
> Signed-off-by:
On Tue, Jun 20, 2023 at 01:49:43PM +0200, Marek Vasut wrote:
> Add domain mapping for the +renesas mail, so that the patches get
> attributed to to Renesas Electronics correctly.
>
> Signed-off-by: Marek Vasut
Applied to gitdm/u-boot, thanks!
--
Tom
signature.asc
Description: PGP signature
Hi,
Has anyone tried to use dwc2 and echi port together with USB disk?
look like this is not working with this combination on any Rockchip
SoC's
Here are the issues that I've reproduced in RK3328 where the disk
connected in EHCI port is detecting but DWC2 is not. Any clue?
=> usb start
starting
Hi Jan,
On Tue, 20 Jun 2023 at 11:37, Jan Kiszka wrote:
>
> On 20.06.23 12:11, Simon Glass wrote:
> > Hi Jan,
> >
> > On Mon, 19 Jun 2023 at 16:09, Jan Kiszka wrote:
> >>
> >> On 19.06.23 16:09, Simon Glass wrote:
> >>> Hi Jan,
> >>>
> >>> On Mon, 19 Jun 2023 at 14:28, Jan Kiszka wrote:
>
On Tue, 20 Jun 2023 at 11:50, Kunihiko Hayashi
wrote:
>
> In case of OF_SEPARATE (!OF_EMBED), the devicetree blob is placed
> after _end, and fdt_find_separate() always returns _end. There is
> a .bss section after _end and the section is cleared before relocation.
>
> When GD_FLG_SKIP_RELOC is
On Tue, 20 Jun 2023 at 12:20, Xavier Drudis Ferran wrote:
>
> El Tue, Jun 20, 2023 at 11:03:57AM +0100, Simon Glass deia:
> > Hi Xavier,
> >
>
> Hi Simon,
>
> > >
> > > It is also possible that one day a device that is not UCLASS_BLK,
> > > UCLASS_BOOTDEV or UCLASS_USB_EMUL is put as children of
[...]
>
> diff --git a/MAINTAINERS b/MAINTAINERS
> index 43603522fd..0d960731cf 100644
> --- a/MAINTAINERS
> +++ b/MAINTAINERS
> @@ -269,7 +269,9 @@ F: configs/cortina_presidio-asic-pnand_defconfig
> ARM FF-A
> M: Abdellatif El Khlifi
> S: Maintained
> +F: cmd/armffa.c
> F:
On 6/20/23 16:13, Marek Vasut wrote:
On 6/20/23 15:36, Michal Simek wrote:
On 6/20/23 11:54, Marek Vasut wrote:
On 6/20/23 11:42, Michal Simek wrote:
On 6/20/23 11:23, Marek Vasut wrote:
On 6/20/23 08:36, Michal Simek wrote:
On 6/19/23 19:04, Eugen Hristev wrote:
On 6/19/23 19:07,
On 6/20/23 16:14, Jassi Brar wrote:
On Tue, 20 Jun 2023 at 05:05, Ilias Apalodimas
wrote:
Sorry for being late to the party,
+cc Jose who maintains DEN0118
On Mon, Jun 19, 2023 at 11:16:53AM -0500, Jassi Brar wrote:
Hi Michal,
On Mon, 19 Jun 2023 at 10:02, Michal Simek wrote:
Hi
On Tue, 20 Jun 2023 at 05:05, Ilias Apalodimas
wrote:
>
> Sorry for being late to the party,
>
> +cc Jose who maintains DEN0118
>
> On Mon, Jun 19, 2023 at 11:16:53AM -0500, Jassi Brar wrote:
> > Hi Michal,
> >
> > On Mon, 19 Jun 2023 at 10:02, Michal Simek wrote:
> > >
> > > Hi Jassi,
> > >
> >
On 6/20/23 15:36, Michal Simek wrote:
On 6/20/23 11:54, Marek Vasut wrote:
On 6/20/23 11:42, Michal Simek wrote:
On 6/20/23 11:23, Marek Vasut wrote:
On 6/20/23 08:36, Michal Simek wrote:
On 6/19/23 19:04, Eugen Hristev wrote:
On 6/19/23 19:07, Marek Vasut wrote:
On 6/19/23 15:26,
Hi Abdellatif,
On Fri, 16 Jun 2023 at 18:28, Abdellatif El Khlifi
wrote:
>
> add support for x0-x17 registers used by the SMC calls
>
> In SMCCC v1.2 [1] arguments are passed in registers x1-x17.
> Results are returned in x0-x17.
>
> This work is inspired from the following kernel commit:
>
>
From: Teik Heng Chong
Fix the write to the HPRT register which treat W1C fields
as if they were mere RW. This leads to unintended clearing of such fields
Signed-off-by: Teik Heng Chong
---
V1->V2
- update subject tags to usb:dwc2
---
drivers/usb/host/dwc2.c | 34
On Sat, 03 Jun 2023 19:32:52 +0530, Mayuresh Chitale wrote:
> This patchset adds support to load images of the SPL's next booting
> stage from a NVMe device.
>
> Changes in v4:
> - Drop patch 4
> - Modify patch 2 to use generic fs.h APIs
>
> [...]
With one change, which is that the
On 6/20/23 11:54, Marek Vasut wrote:
On 6/20/23 11:42, Michal Simek wrote:
On 6/20/23 11:23, Marek Vasut wrote:
On 6/20/23 08:36, Michal Simek wrote:
On 6/19/23 19:04, Eugen Hristev wrote:
On 6/19/23 19:07, Marek Vasut wrote:
On 6/19/23 15:26, Eugen Hristev wrote:
On 5/8/23 06:00,
On Sun, 18 Jun 2023 13:01:33 -0600
Sam Edwards wrote:
Hi Sam,
thanks for the reply, that's very helpful.
> On 6/14/23 18:07, Andre Przywara wrote:
> > So I finally found some time to address some issues in the series,
> > especially in the first patches (pinctrl rework and preparation).
> > I
Add domain mapping for the +renesas mail, so that the patches get
attributed to to Renesas Electronics correctly.
Signed-off-by: Marek Vasut
---
u-boot-config/domain-map | 3 +++
1 file changed, 3 insertions(+)
diff --git a/u-boot-config/domain-map b/u-boot-config/domain-map
index
El Tue, Jun 20, 2023 at 11:03:57AM +0100, Simon Glass deia:
> Hi Xavier,
>
Hi Simon,
> >
> > It is also possible that one day a device that is not UCLASS_BLK,
> > UCLASS_BOOTDEV or UCLASS_USB_EMUL is put as children of a usb storage
> > device (just imagine a future system similar to bootstd for
In case of OF_SEPARATE (!OF_EMBED), the devicetree blob is placed
after _end, and fdt_find_separate() always returns _end. There is
a .bss section after _end and the section is cleared before relocation.
When GD_FLG_SKIP_RELOC is set, relocation is skipped, so the blob is
still in .bss section,
El Tue, Jun 20, 2023 at 11:49:36AM +0200, Marek Vasut deia:
>
> Default, see:
> $ git grep CONFIG_BOOTCOMMAND configs/
>
I'm lost.
I called default what Kconfig used as default.
You seem to call default what's in board specific config files.
Whatever. Fix the wording in the commit message if
On 20.06.23 12:11, Simon Glass wrote:
> Hi Jan,
>
> On Mon, 19 Jun 2023 at 16:09, Jan Kiszka wrote:
>>
>> On 19.06.23 16:09, Simon Glass wrote:
>>> Hi Jan,
>>>
>>> On Mon, 19 Jun 2023 at 14:28, Jan Kiszka wrote:
On 19.06.23 14:36, Simon Glass wrote:
> Hi Jan,
>
> On Fri,
Hi Simon,
On 2023/06/19 21:36, Simon Glass wrote:
Hi Kunihiko,
On Fri, 16 Jun 2023 at 00:59, Kunihiko Hayashi
wrote:
Hi Simon,
Thank you for your comment.
On 2023/06/13 6:17, Simon Glass wrote:
Hi Kunihiko,
On Thu, 8 Jun 2023 at 07:53, Kunihiko Hayashi
wrote:
There are cases that the
On Fri, 16 Jun 2023 at 16:28, Abdellatif El Khlifi
wrote:
>
> Provide armffa command showcasing the use of the U-Boot FF-A support
>
> armffa is a command showcasing how to invoke FF-A operations.
> This provides a guidance to the client developers on how to
> call the FF-A bus interfaces. The
On Fri, 16 Jun 2023 at 16:28, Abdellatif El Khlifi
wrote:
>
> Add MM communication support using FF-A transport
>
> This feature allows accessing MM partitions services through
> EFI MM communication protocol. MM partitions such as StandAlonneMM
> or smm-gateway secure partitions which reside in
On Fri, 16 Jun 2023 at 16:28, Abdellatif El Khlifi
wrote:
>
> Add Arm FF-A support implementing Arm Firmware Framework for Armv8-A v1.0
>
> The Firmware Framework for Arm A-profile processors (FF-A v1.0) [1]
> describes interfaces (ABIs) that standardize communication
> between the Secure World
On Fri, 16 Jun 2023 at 16:28, Abdellatif El Khlifi
wrote:
>
> provide a test case
>
> Signed-off-by: Abdellatif El Khlifi
> Cc: Simon Glass
>
> ---
>
> Changelog:
> ===
>
> v11:
>
> * use ut_asserteq_mem()
>
> MAINTAINERS | 5 +
> test/lib/Makefile | 1 +
>
On Mon, 19 Jun 2023 at 17:25, wrote:
>
> From: Mingli Yu
>
> Fixed when build xilinx_zynqmp in long directory ( >256):
> |
>
Hi Tom, Pali,
On Wed, 14 Jun 2023 at 20:51, Tom Rini wrote:
>
> On Sun, Jun 11, 2023 at 02:53:21PM +0200, Pali Rohár wrote:
>
> > These 3 commits broke support for U-Boot Bootmenu on Nokia N900.
> > Issues were reported more than month ago, but nobody reacted to them.
> > So revert these broken
Hi Jan,
On Mon, 19 Jun 2023 at 16:09, Jan Kiszka wrote:
>
> On 19.06.23 16:09, Simon Glass wrote:
> > Hi Jan,
> >
> > On Mon, 19 Jun 2023 at 14:28, Jan Kiszka wrote:
> >>
> >> On 19.06.23 14:36, Simon Glass wrote:
> >>> Hi Jan,
> >>>
> >>> On Fri, 16 Jun 2023 at 16:42, Jan Kiszka wrote:
>
Sorry for being late to the party,
+cc Jose who maintains DEN0118
On Mon, Jun 19, 2023 at 11:16:53AM -0500, Jassi Brar wrote:
> Hi Michal,
>
> On Mon, 19 Jun 2023 at 10:02, Michal Simek wrote:
> >
> > Hi Jassi,
> >
> > On 5/31/23 07:28, jaswinder.si...@linaro.org wrote:
> > > From: Jassi Brar
Hi Heinrich,
On Mon, 19 Jun 2023 at 18:51, Heinrich Schuchardt wrote:
>
> On 6/19/23 14:57, Simon Glass wrote:
> > I suggest a simple device that needs no setup. The original commit[1]
> > suggests using USB - does that worK?
> >
> > Regards,
> > Simon
> >
> > [1] 49c752c93a78 ("cmd: Add
On Mon, 19 Jun 2023 at 21:36, Sergei Antonov wrote:
>
> Fix an enum/integer mismatch encountered in 'sandbox_defconfig' build.
>
> .../u-boot/drivers/axi/axi-emul-uclass.c:16:5: warning: conflicting types for
> ‘axi_sandbox_get_emul’ due to enum/integer mismatch; have ‘int(struct udevice
> *,
Hi Xavier,
On Wed, 14 Jun 2023 at 09:40, Xavier Drudis Ferran wrote:
>
>
> Thanks for explaining, Simon Glass.
>
> Can someone please stop me if I'm splitting hairs or bikeshedding or
> something ? I guess we agree both checking for null or UCLASS_BOOTDEV
> would work right now but we are
On 6/20/23 11:42, Michal Simek wrote:
On 6/20/23 11:23, Marek Vasut wrote:
On 6/20/23 08:36, Michal Simek wrote:
On 6/19/23 19:04, Eugen Hristev wrote:
On 6/19/23 19:07, Marek Vasut wrote:
On 6/19/23 15:26, Eugen Hristev wrote:
On 5/8/23 06:00, Venkatesh Yadav Abbarapu wrote:
[ Felipe:
On 6/20/23 11:17, Xavier Drudis Ferran wrote:
El Mon, Jun 19, 2023 at 11:49:18PM +0200, Marek Vasut deia:
On 6/19/23 12:12, Xavier Drudis Ferran wrote:
It seems the email addresses are being constantly corrupted in each email.
This time the ML address is wrong and missing an e at the end.
On 6/20/23 11:23, Marek Vasut wrote:
On 6/20/23 08:36, Michal Simek wrote:
On 6/19/23 19:04, Eugen Hristev wrote:
On 6/19/23 19:07, Marek Vasut wrote:
On 6/19/23 15:26, Eugen Hristev wrote:
On 5/8/23 06:00, Venkatesh Yadav Abbarapu wrote:
[ Felipe: Ported from Linux kernel commit
On 6/20/23 09:03, Xavier Drudis Ferran wrote:
El Tue, Jun 20, 2023 at 02:50:48AM +0200, Marek Vasut deia:
On 6/13/23 08:52, Xavier Drudis Ferran wrote:
U-Boot TPL 2023.07-rc2-00144-g497967f1ee (Jun 12 2023 - 11:15:47)
Next is already at rc4 , what's this rc2 ?
It's a test I did last week
On 6/20/23 08:36, Michal Simek wrote:
On 6/19/23 19:04, Eugen Hristev wrote:
On 6/19/23 19:07, Marek Vasut wrote:
On 6/19/23 15:26, Eugen Hristev wrote:
On 5/8/23 06:00, Venkatesh Yadav Abbarapu wrote:
[ Felipe: Ported from Linux kernel commit
f59dcab17629 ("usb: dwc3: core: improve
El Mon, Jun 19, 2023 at 11:49:18PM +0200, Marek Vasut deia:
> On 6/19/23 12:12, Xavier Drudis Ferran wrote:
>
> It seems the email addresses are being constantly corrupted in each email.
> This time the ML address is wrong and missing an e at the end. There is some
> e@ nonexistent address which
Add ms so it is easier to search for tables in memory.
Expand the command-line and print buffers so that we can deal with the
very long ChromeOS command lines. (typically 700 characters).
Enable BOOTSTD_FULL to get the full set of standard-boot options.
Replace the existing manual script with
Drop IDE since this is not widely used anymore. Add NVME since it is
becoming more popular.
Add ms so it is easier to search for tables in memory.
Expand the command-line and print buffers so that we can deal with the
very long ChromeOS command lines. (typically 700 characters).
Enable
It is possible to boot x86-based ChromeOS machines by parsing a table and
locating the kernel and command line. Add a bootmeth for this.
Signed-off-by: Simon Glass
Reviewed-by: Bin Meng
---
(no changes since v1)
boot/Kconfig | 11 ++
boot/Makefile| 1 +
Some Linux parameters can be set automatically by U-Boot, if it knows the
device being used. For example, since U-Boot knows the serial console
being used, it can add parameters for earlycon and console.
Add support for this.
Note that this is an experimental feature and we will see how useful
Allow reading the command line from a zimage, so that it can be recorded
in the bootflow.
Reviewed-by: Bin Meng
Signed-off-by: Simon Glass
---
(no changes since v1)
arch/x86/include/asm/zimage.h | 10 ++
arch/x86/lib/zimage.c | 11 ---
2 files changed, 18
Add a direct interface to booting a zimage, so that bootstd can call it
without going through the command-line interface.
Signed-off-by: Simon Glass
Reviewed-by: Bin Meng
---
(no changes since v1)
arch/x86/include/asm/zimage.h | 17
arch/x86/lib/zimage.c | 82
The Linux command line consists of a number of words with optional values.
At present U-Boot allows this to be changed using the bootargs environment
variable.
But this is quite painful, since the command line can be very long.
Add a function which can adjust a single field in the command line,
We want to enable some of the more interesting bootstd features. Move SPL
up to create some room for the larger U-Boot binary. Also disable
microcode since this is not needed
Signed-off-by: Simon Glass
---
Changes in v2:
- Add new patch to create a little more room for U-Boot on qemu-x86_64
Drop use of the distro boot script and use standard boot instead.
Moving to a text-based environment would be desirable also, but requires
additional work.
Signed-off-by: Simon Glass
---
Changes in v2:
- Add new patch to switch x86 qemu to standard boot
configs/qemu-x86_64_defconfig | 2 +-
1 - 100 of 119 matches
Mail list logo
