On 14/12/2023 21:15, Tom Rini wrote:
On Thu, Dec 14, 2023 at 01:48:42PM -0600, Rob Herring wrote:
On Thu, Dec 14, 2023 at 12:23 PM Tom Rini wrote:
On Thu, Dec 14, 2023 at 03:53:11PM +0100, neil.armstr...@linaro.org wrote:
Hi,
On 14/12/2023 14:50, Sumit Garg wrote:
Prerquisite
On 14/12/2023 20:48, Rob Herring wrote:
>>
>> I think some of the important questions to ask are, how often / likely
>> are the breakages to occur? It seems like these days it's either:
>> - U-Boot had an early version of the binding and we already state we
>> don't support backwards
Hi Neal,
On 12/14/23 18:11, Frager, Neal wrote:
Hi Michal,
This patch corrects the k24 som clocking configuration such that the serdes
Corrects the ...
Ok.
clocks are correctly enabled and the usb0 is configured to use the psgtr
refclk2 for usb3 mode.
I sort of have no problem
Currently, the u-boot zynqmp psgtr driver is not connected to the usb dwc3
driver. Without this, the only way for u-boot to be able to use usb3 is if
the psgtr serdes clocking is already enabled in the psu_init_gpl.c. This
patch enables the psgtr serdes for usb3 use, so the u-boot dwc3 driver
From: Dinesh Maniyam
The reserved space is extended to 32MB in Linux kernel because
additional space is needed for authorization execution of JIC/RBF file.
U-Boot required to align with Linux.
Signed-off-by: Dinesh Maniyam
---
arch/arm/dts/socfpga_agilex.dtsi | 4 ++--
1 file changed, 2
From: Dinesh Maniyam
MEMCLKMGR_EXTCNTRST_C0CNTRST register defined as BIT[0] in documentation
but it is wrongly defined as BIT[7] in u-boot code. This register is used
to hold associated pingpong counter in reset
while PLL and 5:1 mux configuration is changed.
Signed-off-by: Dinesh Maniyam
---
Hi Jagan,
On 2023/12/15 14:36, Jagan Teki wrote:
Hi Heiko/Kerver/Anatoloj,
On Mon, Dec 11, 2023 at 2:30 PM Jagan Teki wrote:
Unlike RK3399, Sunxi/Meson DW HDMI the new Rockchip SoC Rk3328 would
support external vendor PHY with DW HDMI chip.
Support this vendor PHY by adding new platform PHY
> -Original Message-
> From: Simon Glass
> Sent: Friday, December 15, 2023 1:50 AM
> To: U-Boot Mailing List
> Cc: Tom Rini ; Simon Glass ; Chanho
> Park ; Heinrich Schuchardt
;
> Leo ; Nikita Shubin ; Rick Chen
>
> Subject: [PATCH v2 05/21] riscv: Add a reset_cpu() function
>
> The
Hi Heiko/Kerver/Anatoloj,
On Mon, Dec 11, 2023 at 2:30 PM Jagan Teki wrote:
>
> Unlike RK3399, Sunxi/Meson DW HDMI the new Rockchip SoC Rk3328 would
> support external vendor PHY with DW HDMI chip.
>
> Support this vendor PHY by adding new platform PHY ops via DW HDMI
> driver and call the
On 15:15-20231107, Neha Malcom Francis wrote:
> Hi Prasanth,
>
> On 30/10/23 22:34, Prasanth Babu Mantena wrote:
> > EEPROM detection logic in ti_i2c_eeprom_get() involves reading
> > the total size and the 1-byte size with an offset 1. The commit
> > 9f393a2d7af8 ("board: ti: common:
On Fri, 15 Dec 2023 at 01:45, Tom Rini wrote:
>
> On Thu, Dec 14, 2023 at 01:48:42PM -0600, Rob Herring wrote:
> > On Thu, Dec 14, 2023 at 12:23 PM Tom Rini wrote:
> > >
> > > On Thu, Dec 14, 2023 at 03:53:11PM +0100, neil.armstr...@linaro.org wrote:
> > > > Hi,
> > > >
> > > > On 14/12/2023
On Thu, 14 Dec 2023 at 23:53, Tom Rini wrote:
>
> On Thu, Dec 14, 2023 at 03:53:11PM +0100, neil.armstr...@linaro.org wrote:
> > Hi,
> >
> > On 14/12/2023 14:50, Sumit Garg wrote:
> > > Prerquisite
> >
> > s/Prerquisite/Prerequisite/
> >
Ack.
> > > ---
> > >
> > > This patch series
At this point most things work, including booting a distro, so drop
this message.
Signed-off-by: Simon Glass
---
(no changes since v1)
arch/x86/lib/spl.c | 2 +-
doc/board/emulation/qemu-x86.rst | 2 +-
2 files changed, 2 insertions(+), 2 deletions(-)
diff --git
Use zboot_run() to boot rather than the command line. This allows
extlinux to be used (on x86) without CMDLINE being enabled.
Collect any error but do not return it, to match the existing code.
Signed-off-by: Simon Glass
---
(no changes since v1)
boot/pxe_utils.c | 19 ---
1
Use bootm_run() and booti_run() to boot rather than the command line.
This allows extlinux to be used without CMDLINE being enabled.
Collect any error but do not return it, to match the existing code.
Signed-off-by: Simon Glass
---
Changes in v2:
- Update commit message to mention booti
- Use
This code undertakes a separate task from the main logic of
label_run_boot() so move it into its own function.
Signed-off-by: Simon Glass
---
(no changes since v1)
boot/pxe_utils.c | 112 +++
1 file changed, 64 insertions(+), 48 deletions(-)
diff
The bootm_argv[3] expression is used in many places. It is the FDT
address, so use that name throughout.
Assign it to bootm_argv[3] only at the end, when all the conditions are
resolved.
Signed-off-by: Simon Glass
---
(no changes since v1)
boot/pxe_utils.c | 22 --
1 file
This function is far too long and complicated. Split out the part
which actually calls the boot commands into a separate function.
Change a strncpy() to strlcpy() to keep checkpatch happy.
No functional change is intended.
Signed-off-by: Simon Glass
---
(no changes since v1)
The intention here is to nul-terminate the result string, so use the
correct function for that.
Signed-off-by: Simon Glass
---
Changes in v2:
- Split out the strlcpy() change into its own patch
boot/pxe_utils.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git
The fastboot 'boot' command only supports running a U-Boot command if
CONFIG_CMDLINE is enabled. Mention this in the documentation.
Signed-off-by: Simon Glass
Suggested-by: Tom Rini
---
(no changes since v1)
doc/android/fastboot.rst | 1 +
1 file changed, 1 insertion(+)
diff --git
It is possible to boot a kernel without CMDLINE being enabled. Update
the implementation to handle this, and drop the condition from the
FASTBOOT config.
Signed-off-by: Simon Glass
---
Changes in v2:
- Avoid changing the logic when a command is not set
drivers/fastboot/Kconfig | 1 -
Allow the default command line to be used when booting the OS. This is
needed by fastboot.
Signed-off-by: Simon Glass
---
Changes in v2:
- Drop check for NULL with env_set()
include/bootm.h | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/include/bootm.h b/include/bootm.h
Given the name of this variable, it should be an address, not a
pointer. Update this, to make it easier to use with sandbox.
Signed-off-by: Simon Glass
Reviewed-by: Dmitrii Merkurev
Reviewed-by: Mattijs Korpershoek
Tested-by: Mattijs Korpershoek # on vim3
---
Changes in v2:
- Use
Use the new CONFIG_BOOTM symbol to determine whether SYS_BOOT_LEN is
visible or not, since we want to support decompression when CMDLINE is
disabled.
Signed-off-by: Simon Glass
---
(no changes since v1)
boot/Kconfig | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git
Allow these functions to be compiled in when CONFIG_BOOTM is enabled,
even if CONFIG_CMD_BOOTM is not.
Signed-off-by: Simon Glass
---
(no changes since v1)
arch/arc/lib/Makefile| 2 +-
arch/arm/lib/Makefile| 2 +-
arch/m68k/lib/Makefile | 2 +-
Booting an OS does not require the 'bootm' command, so change the
condition for these options.
Move them into boot/ so they don't depend on CMDLINE
Note that CMD_BOOTM_PRE_LOAD has been put directly into the bootm code
so will need some additional refactoring (and a test!) to allow it to
change
Create a separate Kconfig option which enables the bootm logic,
separate from the 'bootm' command. This will eventually allow booting
without CMDLINE enabled.
Update boards which disable CMD_BOOTM to disable BOOTM instead, since
CMD_BOOTM now depends on BOOTM
Signed-off-by: Simon Glass
---
(no
The boot menu shows Android first and then a timestamp option. Move
these later since they are less commonly used.
Signed-off-by: Simon Glass
---
(no changes since v1)
boot/Kconfig | 36 ++--
1 file changed, 18 insertions(+), 18 deletions(-)
diff --git
On 2023-12-14 17:36, Tejas Bhumkar wrote:
Added support for Macronix OSPI flash parts MX25UM51345G
and MX66UM2G45G, with initial testing conducted on the
Tenzing-se1 board using STR mode for basic erase, write,
and readback operations.
Signed-off-by: Tejas Bhumkar
---
On Thu, Dec 7, 2023 at 2:51 PM Marek Vasut wrote:
>
> In case the Buck5 and Buck6 regulators which supply DRAM Vdd1 and Vdd2/Vddq
> respectively operate in automatic PWM/PFM mode, the DRAM EDAC detects more
> correctable errors than if the regulators operate in forced PWM only mode.
> Force DRAM
On Fri, Dec 1, 2023 at 10:58 PM Marek Vasut wrote:
>
> Enable CAAM in U-Boot to make crypto available early in the boot process.
>
> This has a side-effect that in case an older kernel version contains a
> broken CAAM initialization timeout code, initialization in bootloader
> will help that old
On Fri, Dec 1, 2023 at 10:56 PM Marek Vasut wrote:
>
> Enable CAAM in U-Boot to make crypto available early in the boot process.
>
> This has a side-effect that in case an older kernel version contains a
> broken CAAM initialization timeout code, initialization in bootloader
> will help that old
On Fri, Dec 1, 2023 at 10:49 PM Marek Vasut wrote:
>
> Add PLL settings for DDR 3600 MTps . This is very similar to 3200 MTps
> PLL setting, except the divider is not 9 but 8 .
>
> Signed-off-by: Marek Vasut
Applied to u-boot-imx master, thanks.
On Fri, Dec 1, 2023 at 10:48 PM Marek Vasut wrote:
>
> The new MX8M DDR tool 3.31 now generates a programming file which uses
> data rate 3734 instead of 3733 or 3732 . Handle another rounding option .
>
> Signed-off-by: Marek Vasut
Applied to u-boot-imx master, thanks.
On Sat, Nov 4, 2023 at 9:04 PM Marek Vasut wrote:
>
> Inhibit DTC warning in imx8mp-dhcom-pdk3-overlay-rev100.dts:
> "
> arch/arm/dts/imx8mp-dhcom-pdk3-overlay-rev100.dtbo: Warning (reg_format):
> /fragment@0/__overlay__:reg: property has invalid length (4 bytes)
> (#address-cells == 2,
On Thu, Dec 14, 2023 at 1:22 PM Tim Harvey wrote:
>
> Remove lpddr4_timing_imx8mm_512mb.c mistakenly committed
>
> Fixes: a1c711046b0d "(board: gateworks: venice: add imx8mm-gw7903 support)"
> Signed-off-by: Tim Harvey
Applied all to u-boot-imx master, thanks.
The Turing RK1 is a Rockchip RK3588 based SoM from Turing Machines.
Specifications:
Rockchip RK3588 SoC
4x ARM Cortex-A76, 4x ARM Cortex-A55
8/16/32GB memory LPDDR4x
Mali G610MC4 GPU
32GB eMMC HS400
2x USB 2.0, 2x USB 3.0
2x MIPI CSI 4x lanes
1x MIPI-DSI DPHY 2x
Hi Manorit,
This commit added a possibly unintentional dependency on python 3.9+.
I ran into this while trying to build the soon-to-be-released 09.01.00.008.
Build failure on ubuntu 20.04 which uses python 3.8:
"binman: 'type' object is not subscriptable"
This can be fixed by:
diff --git
Hi Heinrich,
On Thu, 14 Dec 2023 at 00:21, Heinrich Schuchardt wrote:
>
>
>
> Am 13. Dezember 2023 21:39:12 MEZ schrieb Simon Glass :
> >Update to use the new docs.u-boot.org URL for documentation.
>
> Who owns that domain? Can we let http://www.u-boot.org forward to
> https://docs.u-boot.org?
Hi Rafał,
On Thu, 14 Dec 2023 at 08:36, Rafał Miłecki wrote:
>
> From: Rafał Miłecki
>
> So far we had a property for "ethaddr" NVMEM cell containing base
> Ethernet MAC address. The problem is vendors often pick non-standard
> names for storing MAC(s) (other than "ethaddr"). A few names were
>
+Masahiro Yamada too
On Wed, 13 Dec 2023 at 01:22, Geert Uytterhoeven wrote:
>
> Hi,
>
> On Tue, Dec 12, 2023 at 4:52 PM Andrew Davis wrote:
> > On 12/12/23 8:05 AM, Simon Glass wrote:
> > > The devicetree files for a board can be quite large, perhaps around
> > > 60KB. To boot on any supported
Hi Rob,
On Thu, 14 Dec 2023 at 10:27, Rob Herring wrote:
>
> On Fri, Dec 08, 2023 at 03:58:10PM -0700, Simon Glass wrote:
> > Hi Rob,
> >
> > On Fri, 8 Dec 2023 at 14:56, Rob Herring wrote:
> > >
> > > On Fri, Dec 8, 2023 at 11:47 AM Simon Glass wrote:
> > > >
> > > > Hi Rob,
> > > >
> > > >
On Thu, Dec 14, 2023 at 04:50:53PM +0100, Michal Simek wrote:
> Hi Tom,
>
> please pull these patches to your next branch. There is nothing
> controversial from my point of view. The biggest change is to create new
> kria defconfig to target couple of boards based on ZynqMP. There is going to
>
On 12/14/23 2:10 PM, b...@ti.com wrote:
On December 14, 2023 thus sayeth Marcel Ziswiler:
Hi Apurva
Thanks!
On Wed, 2023-12-06 at 18:07 +0530, Apurva Nandan wrote:
Hello Everyone!
This series will introduce basic support (SD and UART) support for Texas
Instruments J784S4 EVM.
For the
On Thu, Dec 14, 2023 at 01:48:42PM -0600, Rob Herring wrote:
> On Thu, Dec 14, 2023 at 12:23 PM Tom Rini wrote:
> >
> > On Thu, Dec 14, 2023 at 03:53:11PM +0100, neil.armstr...@linaro.org wrote:
> > > Hi,
> > >
> > > On 14/12/2023 14:50, Sumit Garg wrote:
> > > > Prerquisite
> > >
> > >
On December 14, 2023 thus sayeth Marcel Ziswiler:
> Hi Apurva
>
> Thanks!
>
> On Wed, 2023-12-06 at 18:07 +0530, Apurva Nandan wrote:
> > Hello Everyone!
> >
> > This series will introduce basic support (SD and UART) support for Texas
> > Instruments J784S4 EVM.
>
> For the whole series:
>
>
On Thu, Dec 14, 2023 at 12:23 PM Tom Rini wrote:
>
> On Thu, Dec 14, 2023 at 03:53:11PM +0100, neil.armstr...@linaro.org wrote:
> > Hi,
> >
> > On 14/12/2023 14:50, Sumit Garg wrote:
> > > Prerquisite
> >
> > s/Prerquisite/Prerequisite/
> >
> > > ---
> > >
> > > This patch series requires
Hi Mark, Abdellatif
On Thu, 14 Dec 2023 at 18:47, Mark Kettenis wrote:
>
> > Date: Thu, 14 Dec 2023 15:53:46 +
> > From: Abdellatif El Khlifi
>
> Hi Abdellatif,
>
> > Hi guys,
> >
> > I'd like to ask for advice regarding adding EFI RT support to the Arm's
> > FF-A bus
> > in U-Boot.
> >
>
On Mon, Oct 30, 2023 at 9:50 PM Jan Kiszka wrote:
>
> From: Jan Kiszka
>
> We are not iterating CQSPI_REG_RETRY, we are waiting 'timeout' ms, since
> day 1.
>
> Signed-off-by: Jan Kiszka
> ---
Applied to u-boot-spi/master
On Wed, Oct 18, 2023 at 9:08 AM Bruce Suen wrote:
>
> Add support for XTX XT55Q02G(1.8V,2Gbit).
>
> Signed-off-by: Bruce Suen
> ---
Applied to u-boot-spi/master
From: Chris Morgan
The Powkiddy X55 is a Rockchip RK3566 based handheld gaming device.
UART, ADC, eMMC, and SDMMC are tested to work in U-Boot and this
successfully boots mainline Linux.
Changes since V1:
- Built on top of this patch series [1] which makes the ADC detect
function more
On Thu, Dec 14, 2023 at 03:53:11PM +0100, neil.armstr...@linaro.org wrote:
> Hi,
>
> On 14/12/2023 14:50, Sumit Garg wrote:
> > Prerquisite
>
> s/Prerquisite/Prerequisite/
>
> > ---
> >
> > This patch series requires devicetree-rebasing git repo to be added as a
> > subtree to the main
On Wed, Oct 18, 2023 at 12:59 AM Igor Prusov wrote:
>
> Adaptation of Linux commit d74c36480a67
>
> This patch adds support for ESMT F50L1G41LB and F50D1G41LB.
> It seems that ESMT likes to use random JEDEC ID from other vendors.
> Their 1G chips uses 0xc8 from GigaDevice and 2G/4G chips uses
After some header file cleanups to add missing include files, remove
common.h from all files in the lib directory. This primarily means just
dropping the line but in a few cases we need to add in other header
files now.
Signed-off-by: Tom Rini
Reviewed-by: Simon Glass
---
lib/abuf.c
Add some missing headers such as or or
to header files that make direct usage of things
provided by these headers.
Signed-off-by: Tom Rini
Reviewed-by: Simon Glass
---
include/atmel_lcd.h | 2 ++
include/getopt.h| 2 ++
include/mapmem.h| 2 ++
include/memalign.h | 1 +
We largely do not need in these files, so drop it. The only
exception here is that efi_freestanding.c needs and had
been getting that via .
Signed-off-by: Tom Rini
---
lib/efi_loader/dtbdump.c | 1 -
lib/efi_loader/efi_acpi.c | 1 -
In include/display_options.h we cannot include ourself, but do need
directly. Then in lib/display_options.c we further clean
the list to remove common.h.
Signed-off-by: Tom Rini
Reviewed-by: Simon Glass
---
lib/display_options.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
diff
In order for RMOBILE_CPU_TYPE_R9A07G044L to be defined we need to
include here.
Signed-off-by: Tom Rini
Reviewed-by: Marek Vasut
---
arch/arm/mach-rmobile/cpu_info-rzg2l.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/arch/arm/mach-rmobile/cpu_info-rzg2l.c
Cleanup the list of headers we include here. For the tools build we only
need to exclude as that's used by the target build for the
prototype for schedule(), and we don't need to get that via
. We can also make use of our intentionally
existing as a redirection to to reduce ifdef'd lines.
In the architecture global data, replace the one case of u32 with
unsigned long. Now, we can drop config.h here but then do need to add it
in two m68k-centric spaces.
Signed-off-by: Tom Rini
Acked-by: Angelo Dureghello
---
arch/m68k/include/asm/cache.h | 2 ++
In most cases, the architecture global data currently makes use of
assorted linux types, but does not include to provide
them. Add instead of relying on indirect inclusion.
Signed-off-by: Tom Rini
---
Changes in v2:
- Update include/system-constraints.h and board/cssi/cmpc885/sdram.c
---
We need in these files as we reference Linux types.
Signed-off-by: Tom Rini
Reviewed-by: Simon Glass
---
arch/sandbox/include/asm/global_data.h | 2 ++
1 file changed, 2 insertions(+)
diff --git a/arch/sandbox/include/asm/global_data.h
b/arch/sandbox/include/asm/global_data.h
index
We need and include and this in turn already includes
, so drop it here.
Signed-off-by: Tom Rini
Reviewed-by: Simon Glass
---
arch/arm/include/asm/global_data.h | 1 -
1 file changed, 1 deletion(-)
diff --git a/arch/arm/include/asm/global_data.h
b/arch/arm/include/asm/global_data.h
index
We need to include directly when a file needs to have
something such as CFG_SYS_SDRAM_SIZE referenced as this file is not
automatically globally included and is most commonly indirectly included
via common.h. Remove most cases of arm including config.h directly, but
add it where needed. This
These files include twice. Start by removing the second
inclusion of the file.
Signed-off-by: Tom Rini
Reviewed-by: Simon Glass
---
board/data_modul/common/common.c | 1 -
board/grinn/liteboard/board.c | 1 -
board/toradex/colibri_imx7/colibri_imx7.c | 1 -
In order to make it easier to move on to dropping common.h from code
directly, remove common.h inclusion from the rest of the header file
which had been including it.
Signed-off-by: Tom Rini
Reviewed-by: Simon Glass
---
board/BuR/common/br_resetc.h | 1 -
Remove and replace common.h and config.h in sandbox when it's not needed
and add some explicit includes where needed.
Signed-off-by: Tom Rini
---
Changes in v2:
- Drop from arch/sandbox/cpu/state.c as it's also not
needed and leads to unrelated build failures with CMDLINE=n
---
We need to include directly when a file needs to have
something such as CFG_SYS_SDRAM_SIZE referenced as this file is not
automatically globally included and is most commonly indirectly included
via common.h. Remove most cases of arc including config.h directly, but
add it where needed. Further
Given how we define QE_MURAM_SIZE today, this header needs to have
added to it.
Signed-off-by: Tom Rini
Reviewed-by: Simon Glass
---
include/linux/immap_qe.h | 2 ++
1 file changed, 2 insertions(+)
diff --git a/include/linux/immap_qe.h b/include/linux/immap_qe.h
index
On Fri, Aug 4, 2023 at 7:56 AM Jit Loon Lim wrote:
>
> From: Teik Heng Chong
>
> Add Support for GigaDevice GD55LB02GEBIR SPI NOR flash as QSPI
> configuration flash
>
> Signed-off-by: Teik Heng Chong
> ---
Applied to u-boot-spi/master
On Fri, Aug 4, 2023 at 7:57 AM Jit Loon Lim wrote:
>
> MT25QU01 OPN with 4B OPCODE support is currently not supported in
> source code and the driver reuses the definition for "n25q00a"
> which has the same silicon ID but is a slower part.
>
> Adding mt25u01g definition to the source code to
On Sat, Aug 5, 2023 at 2:05 AM wrote:
>
> From: Godfrey Mwangi
>
> Add Micron MT25QU128AB flash.
>
> Signed-off-by: Godfrey Mwangi
> ---
Applied u-boot-spi/master
On Tue, Sep 12, 2023 at 3:20 PM Udit Kumar wrote:
>
> Currently spi driver gets flash parameter from first subnode.
>
> Few boards have more than one flash with different parameters
> and selection of flash is done by on board switch settings.
> In such case, uboot needs to be recompiled with
On Tue, Sep 26, 2023 at 2:40 PM Jim Liu wrote:
>
> add flash w25q01jv, w25q01jvfim and w25q02jv support
>
> Signed-off-by: Jim Liu
> ---
Applied to u-boot-spi/master
On Thu, Dec 14, 2023 at 11:06:58AM +0800, tracymg...@outlook.com wrote:
> From: TracyMg_Li
>
> Signed-off-by: TracyMg_Li
Please rework your commit message.
> ---
> arch/arm/Kconfig | 8 ++
> arch/arm/dts/Makefile| 1 +
> arch/arm/dts/phytium-pe2201.dts | 43
On Thu, Dec 14, 2023 at 06:36:37PM +0100, Jan Kiszka wrote:
> On 31.10.23 08:14, Stefan Roese wrote:
> > On 10/30/23 17:20, Jan Kiszka wrote:
> >> From: Jan Kiszka
> >>
> >> We are not iterating CQSPI_REG_RETRY, we are waiting 'timeout' ms, since
> >> day 1.
> >>
> >> Signed-off-by: Jan Kiszka
>
On Thu, Dec 14, 2023 at 05:54:17PM +0100, Csókás Bence wrote:
> Signed-off-by: Csókás Bence
Reviewed-by: Tom Rini
--
Tom
signature.asc
Description: PGP signature
On Thu, Dec 14, 2023 at 05:29:31PM +0100, Csókás Bence wrote:
> It may be necessary to set breakpoints etc. on a specific fault handler in
> SPL.
> Add a Kconfig option to separate the different handlers into their own
> individual infinite loops.
>
> Signed-off-by: Csókás Bence
> ---
>
On Thu, Dec 14, 2023 at 09:50:26AM -0700, Simon Glass wrote:
> In quite a few places, the bootm command is used to handle a boot. We
> want these to be done without needing CONFIG_CMDLINE, so add a new
> bootm_run() function to handle this.
>
> Signed-off-by: Simon Glass
[snip]
> +int
On Thu, Dec 14, 2023 at 09:50:25AM -0700, Simon Glass wrote:
> Use struct bootm_info with this function, to avoiding needing to
> create a new one.
>
> Signed-off-by: Simon Glass
Reviewed-by: Tom Rini
--
Tom
signature.asc
Description: PGP signature
On Thu, Dec 14, 2023 at 09:50:24AM -0700, Simon Glass wrote:
> Rename the function to bootm_run_states() to better indicate ts
> purpose. The 'do_' prefix is used to indicate a command processor,
> which this is now not.
>
> Signed-off-by: Simon Glass
Reviewed-by: Tom Rini
--
Tom
On Thu, Dec 14, 2023 at 09:50:19AM -0700, Simon Glass wrote:
> Add fields for the three bootm parameters and other things needed for
> booting. Also add a helper to set up the struct correctly.
>
> Signed-off-by: Simon Glass
[snip]
> diff --git a/include/bootm.h b/include/bootm.h
> index
On Thu, Dec 14, 2023 at 09:50:23AM -0700, Simon Glass wrote:
> Use the bootm_info struct to hold the information required by bootm.
>
> Now that none of the functions called from do_bootm_states() needs an
> argv[] list, change the arguments of do_bootm_states() as well. Take
> care to use the
On Thu, Dec 14, 2023 at 09:50:22AM -0700, Simon Glass wrote:
> Use the compiler to get the set of states, instead of the preprocessor.
>
> Signed-off-by: Simon Glass
Reviewed-by: Tom Rini
--
Tom
signature.asc
Description: PGP signature
On Thu, Dec 14, 2023 at 09:50:20AM -0700, Simon Glass wrote:
> This is an exported function, so move the function comment to the
> bootm.h header file.
>
> Signed-off-by: Simon Glass
Reviewed-by: Tom Rini
--
Tom
signature.asc
Description: PGP signature
On Thu, Dec 14, 2023 at 09:50:21AM -0700, Simon Glass wrote:
> Use the compiler to get the set of states, instead of the preprocessor.
>
> Signed-off-by: Simon Glass
Reviewed-by: Tom Rini
--
Tom
signature.asc
Description: PGP signature
On Thu, Dec 14, 2023 at 09:50:18AM -0700, Simon Glass wrote:
> Adjust boot_os_fn to use struct bootm_info instead of the separate
> argc, argv and image parameters. Update the handlers accordingly. Few
> of the functions make use of the arguments, so this improves code size
> slightly.
>
>
On Thu, Dec 14, 2023 at 09:50:17AM -0700, Simon Glass wrote:
> Some OS functions require the arguments to the 'bootm' command. This is
> inconvenient for two reasons.
>
> Firstly, there may not be any actual command, if CMDLINE is not enabled
> and programmatic boot is being used.
>
> Secondly,
Hi Apurva
Thanks!
On Wed, 2023-12-06 at 18:07 +0530, Apurva Nandan wrote:
> Hello Everyone!
>
> This series will introduce basic support (SD and UART) support for Texas
> Instruments J784S4 EVM.
For the whole series:
Tested-by: Marcel Ziswiler
However, one thing I noticed is that with
On 31.10.23 08:14, Stefan Roese wrote:
> On 10/30/23 17:20, Jan Kiszka wrote:
>> From: Jan Kiszka
>>
>> We are not iterating CQSPI_REG_RETRY, we are waiting 'timeout' ms, since
>> day 1.
>>
>> Signed-off-by: Jan Kiszka
>
> Reviewed-by: Stefan Roese
>
> Thanks,
> Stefan
>
>> ---
>>
>> We are
On Fri, Dec 08, 2023 at 03:58:10PM -0700, Simon Glass wrote:
> Hi Rob,
>
> On Fri, 8 Dec 2023 at 14:56, Rob Herring wrote:
> >
> > On Fri, Dec 8, 2023 at 11:47 AM Simon Glass wrote:
> > >
> > > Hi Rob,
> > >
> > > On Fri, 8 Dec 2023 at 08:00, Rob Herring wrote:
> > > >
> > > > On Thu, Nov 16,
Hi Tim,
On Thu, Dec 14, 2023 at 2:09 PM Tim Harvey wrote:
> Fabio,
>
> Thanks for asking. I suppose I should have put a Fixes on "[2/3]
> imx8mp-venice: fix DRAM bus configuration" as that one does resolve a
> real issue (patch 1 just removes a bogus file and patch 3 is a memory
> speed
Hi Michal,
>
>> This patch corrects the k24 som clocking configuration such that the serdes
>
>> Corrects the ...
>
> Ok.
>
>> clocks are correctly enabled and the usb0 is configured to use the psgtr
>> refclk2 for usb3 mode.
>
>> I sort of have no problem with this patch but it should be
On Thu, Dec 14, 2023 at 8:29 AM Fabio Estevam wrote:
>
> Hi Tim,
>
> On Thu, Dec 14, 2023 at 1:22 PM Tim Harvey wrote:
> >
> > The imx8mp venice boards can support 2000Mhz DRAM.
> > Update the DRAM config to support this.
> >
> > Signed-off-by: Tim Harvey
>
> Do you consider this series
Hi Neal,
On 12/14/23 17:30, Frager, Neal wrote:
Hi Michal,
This patch corrects the k24 som clocking configuration such that the serdes
Corrects the ...
Ok.
clocks are correctly enabled and the usb0 is configured to use the psgtr
refclk2 for usb3 mode.
I sort of have no problem with
Signed-off-by: Csókás Bence
---
lib/rsa/rsa-sign.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
diff --git a/lib/rsa/rsa-sign.c b/lib/rsa/rsa-sign.c
index d20bdb58a5..0d67a80b82 100644
--- a/lib/rsa/rsa-sign.c
+++ b/lib/rsa/rsa-sign.c
@@ -317,7 +317,8 @@ static int
This series continues refactoring the bootm code to allow it to be used
with CONFIG_COMMAND disabled. The OS-handling code is refactored and
a new bootm_run() function is created to run through the bootm stages.
This completes the work.
A booti_go() function is created also, in case it proves
It may be necessary to set breakpoints etc. on a specific fault handler in SPL.
Add a Kconfig option to separate the different handlers into their own
individual infinite loops.
Signed-off-by: Csókás Bence
---
arch/arm/Kconfig | 10 ++
arch/arm/lib/vectors.S | 18
In a few places, the booti command is used to handle a boot. We want
these to be done without needing CONFIG_CMDLINE, so add a new
booti_run() function to handle this.
So far this is not used.
Signed-off-by: Simon Glass
---
Changes in v2:
- Rework series to allow OS access to cmdline arguments
Use the new bootm/z_run() functions to avoid having to create an
argument list for the stm32prog code.
Signed-off-by: Simon Glass
---
(no changes since v1)
.../cmd_stm32prog/cmd_stm32prog.c | 20 ++-
1 file changed, 11 insertions(+), 9 deletions(-)
diff --git
1 - 100 of 173 matches
Mail list logo
