change for the ARM architecture:
master ARM repository:Tom Rix
Atmel (AT91): Jean-Christophe Plagniol-Villard
Marvell (PXA + IXP): Jean-Christophe Plagniol-Villard
I decline it
Best Regards,
J.
___
U-Boot
On 18:15 Sat 05 Sep , Eric Benard wrote:
these boards are built around Atmel's AT91SAM9260/9G20 and have
up to 64MB of NOR flash, up to 128MB of SDRAM, up to 2GB of NAND
and include a 10/100 Ethernet PHY in RMII mode.
Signed-off-by: Eric Benard e...@eukrea.com
---
MAINTAINERS
On 08:46 Sun 06 Sep , Tom wrote:
Jean-Christophe PLAGNIOL-VILLARD wrote:
On 15:12 Fri 04 Sep , Tom Rix wrote:
snip
please add an empty line
I will take care of all the empty lines.
+ if (ret == 0)
+ ret = data;
+ else
+ printf(TWL4030:USB:Read[0x%x] Error
On 17:27 Fri 04 Sep , Justin Waters wrote:
Simon,
I found a slight problem with this section of the patch:
On Mon, 2009-08-24 at 03:10 -0400, Simon Kagstrom wrote:
diff --git a/include/asm-arm/bitops.h b/include/asm-arm/bitops.h
index 854e225..3c7b00c 100644
---
Jean-Christophe: In
http://lists.denx.de/pipermail/u-boot/2009-August/059087.html
we agreed on omap3_devkit8000.
in v4 the author prefer it devkit8000 so I respect it
You missed v5 and v6, no?
no I did not as Frederik Kriewitz said this
'Oh yes, do we really need a v7? Or is v4 (with
On 23:43 Sun 06 Sep , Wolfgang Denk wrote:
Dear Jean-Christophe PLAGNIOL-VILLARD,
In message 1251037960-17063-1-git-send-email-plagn...@jcrosoft.com you
wrote:
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD plagn...@jcrosoft.com
---
Sorry for the late comment, but I hust notice
On 22:50 Sun 06 Sep , Wolfgang Denk wrote:
Dear Jean-Christophe PLAGNIOL-VILLARD,
In message 20090905113728.gn30...@game.jcrosoft.org you wrote:
Sorry to ping you all, but are there any more comments on work to be
done before this patch series can be accepted? The patches were
On 11:03 Sat 05 Sep , Albin Tonnerre wrote:
Oh ... I had a more recent patch, but looks like it didn't make it to the
list.
It already fixes a large parts of your comments. Thanks for the review
please use MCI0_BASE and MCI1_BASE so we can detect if the soc support
multiple mci and
On 22:14 Fri 04 Sep , Wolfgang Denk wrote:
Dear Simon Kagstrom,
In message 20090831113210.02299...@marrow.netinsight.se you wrote:
On Mon, 24 Aug 2009 09:06:05 +0200
Simon Kagstrom simon.kagst...@netinsight.net wrote:
This update to the patch series just cleans up the commit
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD plagn...@jcrosoft.com
---
include/asm-arm/arch-at91/at91cap9.h|4
include/asm-arm/arch-at91/at91sam9260.h |4
include/asm-arm/arch-at91/at91sam9261.h |3 +++
include/asm-arm/arch-at91/at91sam9263.h |4
include/asm
On 13:20 Sat 05 Sep , Albin Tonnerre wrote:
On Sat, 05 Sep 2009 01:47 +0200, Jean-Christophe PLAGNIOL-VILLARD wrote :
On 10:36 Thu 20 Aug , Albin Tonnerre wrote:
On Thu, Aug 20, 2009 at 02:00:45AM +0200, Jean-Christophe
PLAGNIOL-VILLARD wrote :
On 10:49 Tue 18 Aug , Albin
On 07:37 Sat 05 Sep , Dirk Behme wrote:
Dear Jean-Christophe,
Jean-Christophe PLAGNIOL-VILLARD wrote:
Hi,
Please pull
The following changes since commit 3aa8b68d80dbcb6829af60485c1e388b39af793d:
Wolfgang Denk (1):
Merge branch 'next' of ../next
are available in the git
On 16:33 Sat 05 Sep , kevin.morf...@fearnside-systems.co.uk wrote:
This sets CONFIG_SYS_HZ to 1000 for all boards that use the s3c2400 and
s3c2410 cpu's which fixes various problems such as the timeouts in tftp being
too short.
Tested on an Embest SBC2440-II Board with local u-boot
+
+#ifdef CONFIG_SERIAL0
+#define UART_NR S5PC1XX_UART0
+#elif defined(CONFIG_SERIAL1)
+#define UART_NR S5PC1XX_UART1
+#elif defined(CONFIG_SERIAL2)
+#define UART_NR S5PC1XX_UART2
+#elif defined(CONFIG_SERIAL3)
+#define UART_NR S5PC1XX_UART3
+#else
+#error Bad: you
On 12:45 Fri 04 Sep , Dirk Behme wrote:
Kyungmin Park wrote:
Hi,
As he goes to home, I reply it instead.
Nice weekend then :)
On Fri, Sep 4, 2009 at 5:43 PM, Dirk Behmedirk.be...@googlemail.com wrote:
Dear Minkyu Kang,
Minkyu Kang wrote:
Current code is supported only
change for the ARM architecture:
I think this will be better
master ARM repository : Jean-Christophe Plagniol-Villard
Freescale (i.MX)Magnus Lilja?
Or are there any volunteers at Freescale?
Marvell Prafulla
On 12:56 Sun 23 Aug , Frederik Kriewitz wrote:
This patch adds support for the DevKit8000 board.
Signed-off-by: Frederik Kriewitz frede...@kriewitz.eu
---
mach-types.h needs to be synced (MACH_TYPE_DEVKIT8000)
---
MAINTAINERS |4 +
MAKEALL
On 18:03 Mon 24 Aug , Albin Tonnerre wrote:
The Calao SBC35-A9G20 board is manufactured and sold by Calao Systems
http://www.calao-systems.com. It is built around an AT91SAM9G20 ARM SoC
running at 400MHz. It features an Ethernet port, an SPI RTC backed by an
onboard
battery , an SD/MMC
Hi,
please be carefull you have a lot's of ligne which exceed 80 chars
limit
+
+/* Define MUSB_DEBUG before including this file to get debug macros */
+#ifdef MUSB_DEBUG
+
+static inline void MUSB_PRINT_PWR(u8 b)
please lowercase
+{
+ serial_printf(\tpower 0x%2.2x\n,
saveenv
usbtty will be usable by accessing the /dev/ttyACM0 on a linux host.
Signed-off-by: Tom Rix tom@windriver.com
---
include/configs/omap3_zoom1.h | 16
1 files changed, 16 insertions(+), 0 deletions(-)
Acked-by: Jean-Christophe PLAGNIOL-VILLARD plagn
On 11:27 Fri 04 Sep , Simon Kagstrom wrote:
Make arm926ejs use -march=armv5t to avoid problems with EABI
Using -march=armv5t instead of armv5te allows Marvell Kirkwood-based
boards to boot with the EABI changes introduced in commit
f772acf8a584067033eff1e231fcd1fb3a00d3d9
On 10:31 Thu 03 Sep , Manuel Sahm wrote:
Hello,
I have to use interrupts in UBoot 1.3.4 - how could I enable them ?
I have an AT91SAM9G20 - in ist header file I enable CONFIG_USE_IRQ und
uncomment the lines#ifdefc CONFIG_USE_IRQ #error #endif.
I inserted the lines:
#define
LogicPD
Jean-Christophe PLAGNIOL-VILLARD (3):
omap: move TI's boards to board/ti/
arm: move Logicpd's boards to board/logicpd/
omap3: move the other boards to board/
Prafulla Wadaskar (1):
arm: Kirkwood: add SYSRSTn Duration Counter Support
Simon Kagstrom (1
On 09:41 Tue 01 Sep , Po-Yu Chuang wrote:
Dear Jean-Christophe PLAGNIOL-VILLARD,
2009/8/20 Po-Yu Chuang ratbert.chu...@gmail.com:
Dear Jean-Christophe PLAGNIOL-VILLARD,
From: Po-Yu Chuang ratb...@faraday-tech.com
This patch adds support for A320 evaluation board from Faraday
On 02:32 Tue 11 Aug , Ilya Yanok wrote:
This patch adds support for i.MX27-LITEKIT development board from
LogicPD. This board uses i.MX27 SoC and has 2MB NOR flash, 64MB NAND
flash, FEC ethernet controller integrated into i.MX27.
Signed-off-by: Ilya Yanok ya...@emcraft.com
---
On 20:59 Thu 20 Aug , Prafulla Wadaskar wrote:
This feature can be used to trigger special command sysrstcmd using
reset key long press event and environment variable sysrstdelay is set
(useful for reset to factory or manufacturing mode execution)
Kirkwood SoC implements a hardware-based
On 16:04 Thu 20 Aug , Albin Tonnerre wrote:
The Calao TNY-A9260 and TNY-9G20 are boards manufactured and sold by
Calao Systems http://www.calao-systems.com. Their components are very
similar to the AT91SAM9260EK board, so their configuration is based on
the configuration of this board.
On 11:26 Tue 01 Sep , Albin Tonnerre wrote:
Commit 7ebafb7ec1a0285af8380623c009576f92583b98 introduced a mistake in the
spi
init function call for those boards. This patch fixes this.
Signed-off-by: Albin Tonnerre albin.tonne...@free-electrons.com
---
board/afeb9260/afeb9260.c
On 13:26 Fri 28 Aug , Uladzislau Rezki wrote:
Hello list,
I have Intel IQ31244 board that is based on XScale-IOP8032x Family processor.
I want to use u-boot as embedded loader but it seems to me that this
board is not
supported by u-boot.
So, my questions are: Is it possible to build
On 21:05 Sat 29 Aug , Albin Tonnerre wrote:
Hi Sami,
Please note that I'm not an u-boot custodian, so what follows is by no means
authoritative.
However, I do have some comments about your code:
agreed with all comments
Best Regards,
J.
___
On 20:22 Sat 29 Aug , Sami Kantoluoto wrote:
Adds support for Embedtronics Oy's MRFSA board. Board features
AT91SAM9G20 controller, 64 MB of SDRAM, two 64 Mbit data flashses
(AT45DB321), SD card slot, GSM modem, GPS receiver, ZigBee (CC2420),
USB host ports, USB device port, two RS232 and
this driver must be the last one registered to be the last one probed
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD plagn...@jcrosoft.com
---
drivers/net/phy/Makefile |1 +
drivers/net/phy/generic.c | 35 +++
drivers/net/phy/phylib.c |8
the current implementation will allow you to probe, instance and mananage
one phy_device per mii_device
this implementation is based on the linux implementation done by Andy Fleming
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD plagn...@jcrosoft.com
---
drivers/net/phy/Makefile |1
On 09:08 Tue 25 Aug , Stefan Roese wrote:
Hi Michal,
On Tuesday 25 August 2009 09:02:14 Michal Simek wrote:
I saw you have phy lib in your branch. What is the current state?
Are there any problems? When do you want to add to mainline?
IIRC, Jean-Christophe is also working on a PHY
Second, where do you know from that all these boards are from TI?
Are you sure that they are not from SpectrumDigital, Mistral or
DigiKey etc?
here you mix board vendor and distributor as example you can buy a atmel
ref design at DigiKey or resistor, soc, ddr, etc...
Third, I don't like
On 12:56 Sun 23 Aug , Frederik Kriewitz wrote:
This patch adds support for the DevKit8000 board.
Signed-off-by: Frederik Kriewitz frede...@kriewitz.eu
---
mach-types.h needs to be synced (MACH_TYPE_DEVKIT8000)
---
MAINTAINERS |4 +
MAKEALL
On 20:31 Mon 24 Aug , Frederik Kriewitz wrote:
This patch adds support for the DevKit8000 board.
Signed-off-by: Frederik Kriewitz frede...@kriewitz.eu
---
mach-types.h needs to be synced (MACH_TYPE_DEVKIT8000)
Changelog:
v6:
added changelog
v5:
moved files from
On 11:01 Mon 24 Aug , Nobuhiro Iwamatsu wrote:
Update lowlevel_init.S and macro.h.
Signed-off-by: Nobuhiro Iwamatsu iwama...@nigauri.org
---
board/espt/lowlevel_init.S | 10 +---
board/renesas/sh7785lcr/lowlevel_init.S | 96
+--
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD plagn...@jcrosoft.com
---
board/renesas/rsk7203/rsk7203.c |1 +
1 files changed, 1 insertions(+), 0 deletions(-)
diff --git a/board/renesas/rsk7203/rsk7203.c b/board/renesas/rsk7203/rsk7203.c
index 2b85799..fbf2e23 100644
--- a/board/renesas
Hi,
currenlty we have 3 api for stdio device : stdio_dev, serial_device
(multi-serial) and the serial_getc/putc...
this cleanup will join them in one api the stdio_dev which will support
the multi-serial for before and after relocation
this will also pass
we use for the serail multi api the struct stdio_dev also which will reduce
and simplify the code and prepare the join of all serial APIs.
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD plagn...@jcrosoft.com
---
board/esd/pmc440/pmc440.c|2 +-
board/lwmon/lwmon.c |2
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD plagn...@jcrosoft.com
---
common/serial.c | 62 +-
1 files changed, 20 insertions(+), 42 deletions(-)
diff --git a/common/serial.c b/common/serial.c
index a4171be..7d764f2 100644
--- a/common
to allow it to have base address and other information to simplify
the implementation and avoid workarround as done for ns16550 on the omap3 zoom
or ppc4xx as example
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD plagn...@jcrosoft.com
---
board/MAI/AmigaOneG3SE/video.c | 10 +++---
board
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD plagn...@jcrosoft.com
---
Makefile |6 +++---
board/{ = logicpd}/imx31_litekit/Makefile|0
board/{ = logicpd}/imx31_litekit/config.mk |0
board/{ = logicpd}/imx31_litekit
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD plagn...@jcrosoft.com
---
Makefile|4 ++--
board/{omap3 = }/overo/Makefile|0
board/{omap3 = }/overo/config.mk |0
board/{omap3 = }/overo/overo.c |0
board/{omap3 = }/overo/overo.h |0
On 23:05 Fri 21 Aug , Peter Tyser wrote:
Signed-off-by: Peter Tyser pty...@xes-inc.com
---
common/dlmalloc.c | 15 +++
include/malloc.h |2 ++
lib_arm/board.c| 10 --
lib_avr32/board.c | 15 ++-
lib_blackfin/board.c |
On 13:54 Sat 22 Aug , Wolfgang Denk wrote:
Dear Jean-Christophe PLAGNIOL-VILLARD,
In message 20090822085428.ga11...@game.jcrosoft.org you wrote:
common/dlmalloc.c | 15 +++
include/malloc.h |2 ++
lib_arm/board.c| 10
On 10:55 Thu 20 Aug , Frederik Kriewitz wrote:
On Thu, Aug 20, 2009 at 12:19 AM, Jean-Christophe
PLAGNIOL-VILLARDplagn...@jcrosoft.com wrote:
board/omap3/devkit8000/Makefile | 52 +
board/omap3/devkit8000/config.mk| 35
board/omap3/devkit8000/devkit8000.c | 124
On 15:43 Thu 20 Aug , Albin Tonnerre wrote:
On Wed, Aug 19, 2009 at 11:30:05PM +0200, Jean-Christophe PLAGNIOL-VILLARD
wrote :
On 21:14 Wed 19 Aug , Albin Tonnerre wrote:
diff --git a/MAKEALL b/MAKEALL
index edebaea..5882ceb 100755
--- a/MAKEALL
+++ b/MAKEALL
@@ -607,6
Okay I got it
WE can do this but,
There are just two APIs, overall size impact is not much
(100 bytes max).
The actual u-boot.bin size diff for newly posted patch is (169464- 169344=
120 bytes)
ok fine
Best Regards,
J.
___
U-Boot mailing
On 20:37 Thu 20 Aug , Frederik Kriewitz wrote:
On Thu, Aug 20, 2009 at 7:28 PM, Dirk Behmedirk.be...@googlemail.com wrote:
Peter Tyser wrote:
Hi Frederik,
I had some minor aesthetic nitpicks. I'd change the title to Add
support for the DevKit8000 board.
I'll fix them
On 21:14 Wed 19 Aug , Albin Tonnerre wrote:
The Calao TNY-A9260 and TNY-9G20 are boards manufactured and sold by
Calao Systems http://www.calao-systems.com. Their components are very
similar to the AT91SAM9260EK board, so their configuration is based on
the configuration of this board.
On 09:38 Tue 18 Aug , Po-Yu Chuang wrote:
Dear Jean-Christophe PLAGNIOL-VILLARD,
2009/8/18 Jean-Christophe PLAGNIOL-VILLARD plagn...@jcrosoft.com:
On 14:13 Thu 06 Aug , Po-Yu Chuang wrote:
Anyway, I have an idea now.
I can submit a version that do not do the bank swap
(SDRAM
On 16:24 Wed 19 Aug , Prafulla Wadaskar wrote:
I am sorry for previous post v2, pls ignore it, this is the right patch for
the same
This feature can be used to trigger special command sysrstcmd using
reset key long press event and environment variable sysrstdelay is set
(useful for
On 01:20 Tue 18 Aug , Frederik Kriewitz wrote:
This patch adds support for the DevKit8000 board.
Signed-off-by: Frederik Kriewitz frede...@kriewitz.eu
---
mach-types.h needs to be synced (MACH_TYPE_DEVKIT8000)
---
MAINTAINERS |4 +
Makefile
On 12:48 Tue 18 Aug , Simon Kagstrom wrote:
Thanks for the review Prafulla!
On Tue, 18 Aug 2009 03:12:07 -0700
Prafulla Wadaskar prafu...@marvell.com wrote:
v2: Malloc send buffer (comment from Stefan Roese)
Malloc will always be an overhead.
It's only allocated once (the first
On 23:15 Tue 18 Aug , Wolfgang Denk wrote:
Dear Paulraj, Sandeep,
In message 0554bef07d437848af01b9c9b5f0bc5d7e996...@dlee01.ent.ti.com you
wrote:
Yesterday night after J-C mentioned that he applied 2 of my patches to u-bo
ot-arm next I tried to checkout that branch
to add some
---
include/configs/davinci_dm355evm.h | 22 +-
1 files changed, 13 insertions(+), 9 deletions(-)
Acked-by: Jean-Christophe PLAGNIOL-VILLARD plagn...@jcrosoft.com
Scott please apply after the 4 bit patch handling
Best Regards,
J
On 00:01 Tue 18 Aug , Jean-Christophe PLAGNIOL-VILLARD wrote:
On 11:20 Sat 15 Aug , s-paul...@ti.com wrote:
From: Sandeep Paulraj s-paul...@ti.com
This patch adds support for the DM365 EVM.
It has been tested on a DM365 EVM.
Signed-off-by: Sandeep Paulraj s-paul...@ti.com
On 11:08 Tue 18 Aug , Simon Kagstrom wrote:
Hi again!
This patch series is an update to [PATCH 0/8]: Fixes for ubifs build
on ARM sent in july:
http://lists.denx.de/pipermail/u-boot/2009-July/055594.html
and contains the patches which were not accepted. The patches are:
On 11:13 Tue 18 Aug , Simon Kagstrom wrote:
Remove duplicate set_cr
set_cr is defined in both asm-arm/proc-armv/system.h and
include/asm-arm/system.h. This patch removes it (and some duplicate
defines) from the former.
Signed-off-by: Simon Kagstrom simon.kagst...@netinsight.net
---
/linux/bitops.h | 37 +
Acked-by: Jean-Christophe PLAGNIOL-VILLARD plagn...@jcrosoft.com
Best Regards,
J.
___
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
++
9 files changed, 59 insertions(+), 32 deletions(-)
Acked-by: Jean-Christophe PLAGNIOL-VILLARD plagn...@jcrosoft.com
Best Regards,
J.
___
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
On 11:14 Tue 18 Aug , Simon Kagstrom wrote:
Define test_and_set_bit and test_and_clear bit for ARM
Needed for (e.g.) ubifs support to work.
Signed-off-by: Simon Kagstrom simon.kagst...@netinsight.net
---
include/asm-arm/bitops.h | 27 ---
1 files changed,
On 14:16 Wed 19 Aug , Albin Tonnerre wrote:
While rewriting the atmel_mci driver to use the new MMC_GENERIC API (and allow
the use of SD/MMC on AT91 in the process), it appeared that switching the card
frequency before the controller frequency resulted in the answer from the card
never
Applying the basic functionality (function move) now allows others
to finally go on with their long waiting patches.
no this code is omap3 specific and there is no need ot this
rename or move the function make no sense
Yes, it is OMAP3 specific (as already mentioned in the patch
On 10:49 Tue 18 Aug , Albin Tonnerre wrote:
On Tue, Aug 18, 2009 at 12:51:48AM +0200, Jean-Christophe PLAGNIOL-VILLARD
wrote :
no please take a look on the other LED thread
Would you please provide a pointer to this thread ? THe only one remotely
related I can find is
http
On 18:25 Fri 14 Aug , Albin Tonnerre wrote:
Hi,
This afternoon I spent some time trying to get a CompactFlash card to work on
ARM (AT91). While looking at the code, I noticed several things in the I/O
code
that I think are wrong or could be improved, so I figured I'd ask here before
On 05:59 Thu 20 Aug , Frederik Kriewitz wrote:
I'll fix that.
On Thu, Aug 20, 2009 at 12:19 AM, Jean-Christophe
PLAGNIOL-VILLARDplagn...@jcrosoft.com wrote:
+void reset_phy(void)
+{
+ eth_init(gd-bd);
+}
NACK
the net need to be init only when you use it
The kernel will
Signed-off-by: Prafulla Wadaskar prafu...@marvell.com
---
Change log:
v2: updated as per review feedback for v1
bug fix in the previous post (V2) fixed
ok
but I think make optionnal will be better
Hi Jean
Thanks..
I didn't understod what you want to say here, can you pls
On 09:54 Thu 20 Aug , Po-Yu Chuang wrote:
Dear Jean-Christophe PLAGNIOL-VILLARD,
2009/8/20 Jean-Christophe PLAGNIOL-VILLARD plagn...@jcrosoft.com:
On 09:38 Tue 18 Aug , Po-Yu Chuang wrote:
I have submitted a v5 patch. Please check.
where?
I do not seen it
http
+
+#ifndef __CONFIG_H
+#define __CONFIG_H
+
+#if defined(CONFIG_tny_a9260) || defined(CONFIG_tny_a9260_nandflash) ||
defined(CONFIG_tny_a9260_eeprom)
too long
and define must be upper case
+#define CONFIG_TNY_A9260
+#define CONFIG_AT91SAM9260
+#elif defined(CONFIG_tny_a9g20) ||
On 23:10 Tue 04 Aug , Darius Augulis wrote:
On 08/04/2009 10:48 PM, Jean-Christophe PLAGNIOL-VILLARD wrote:
On 09:42 Mon 03 Aug , Darius Augulis wrote:
On 07/08/2009 02:30 PM, Jean-Christophe PLAGNIOL-VILLARD wrote:
On 15:14 Fri 03 Jul , Po-Yu Chuang wrote:
This patch adds support
On 12:45 Thu 06 Aug , Po-Yu Chuang wrote:
Dear Jean-Christophe and Darius,
2009/8/5 Darius Augulis augulis.dar...@gmail.com:
On 08/04/2009 10:48 PM, Jean-Christophe PLAGNIOL-VILLARD wrote:
as I understand correctly the faraday and the CS3518 share the same core
and
IP so
On 14:13 Thu 06 Aug , Po-Yu Chuang wrote:
Dear Jean-Christophe,
2009/7/8 Jean-Christophe PLAGNIOL-VILLARD plagn...@jcrosoft.com:
+.globl lowlevel_init
+lowlevel_init:
+ mov r11, lr
+
+ led 0x0
+
+ /* if REMAP bit is set - memory had been initialzed
On 11:20 Sat 15 Aug , s-paul...@ti.com wrote:
From: Sandeep Paulraj s-paul...@ti.com
This patch adds support for the DM365 EVM.
It has been tested on a DM365 EVM.
Signed-off-by: Sandeep Paulraj s-paul...@ti.com
---
Makefile |3 +
On 11:20 Sat 15 Aug , s-paul...@ti.com wrote:
From: Sandeep Paulraj s-paul...@ti.com
This patch adds support for DaVinci DM365 SOC.
Signed-off-by: Sandeep Paulraj s-paul...@ti.com
---
cpu/arm926ejs/davinci/Makefile |1 +
cpu/arm926ejs/davinci/dm365.c | 35
On 10:03 Fri 14 Aug , Ben Goska wrote:
In commit 187af954cf7958c24efcf0fd62289bbdb4f1f24e there was a typo that
offset all the ecc registers by 4 bytes, fixed that.
Signed-off-by: Ben Goska gos...@onid.oregonstate.edu
---
include/asm-arm/arch-omap3/cpu.h |4 ++--
1 files changed,
On 10:45 Tue 11 Aug , s-paul...@ti.com wrote:
From: Sandeep Paulraj s-paul...@ti.com
This patch adds 4 BIT ecc support in the DaVinci NAND
driver. Tested on both the DM355 and DM365.
Signed-off-by: Sandeep Paulraj s-paul...@ti.com
---
drivers/mtd/nand/davinci_nand.c |
On 10:49 Tue 11 Aug , s-paul...@ti.com wrote:
From: Sandeep Paulraj s-paul...@ti.com
This patch enables NAND support on the DM355 EVM.
Changes in this patch mostly relate to adding the NAND support.
This patch also defines a boot delay.
Signed-off-by: Sandeep Paulraj
On 22:03 Fri 07 Aug , Prafulla Wadaskar wrote:
This feature can be used to trigger special command sysrstcmd using
reset key long press event and environment variable sysrstdelay is set
(useful for reset to factory or manufacturing mode execution)
Kirkwood SoC implements a hardware-based
On 18:30 Wed 22 Jul , Albin Tonnerre wrote:
The name of the atmel nand driver in the kernel changed from at91_nand
to atmel_nand back in June 2008, but the at91-based boards config files
still refer to at91_nand. This patch updates them with the new name
Signed-off-by: Albin Tonnerre
On 00:26 Tue 18 Aug , Albin Tonnerre wrote:
On Tue, Aug 18, 2009 at 12:14:12AM +0200, Jean-Christophe PLAGNIOL-VILLARD
wrote :
I've recive a ack for the pm9263 recently so I apply this version
Did you mean 9261 ? From your previous mail, I thought this was the one
causing
issues
On 00:13 Tue 18 Aug , Albin Tonnerre wrote:
On Mon, Aug 17, 2009 at 11:41:06PM +0200, Jean-Christophe PLAGNIOL-VILLARD
wrote :
+
+#ifndef __CONFIG_H
+#define __CONFIG_H
+
+#if defined(CONFIG_tny_a9260) || defined(CONFIG_tny_a9260_nandflash) ||
defined
On 23:39 Wed 12 Aug , Albin Tonnerre wrote:
On Wed, Aug 12, 2009 at 11:15:26PM +0200, Jean-Christophe PLAGNIOL-VILLARD
wrote :
On 18:10 Wed 12 Aug , Albin Tonnerre wrote:
Currently, at91/led.c only provides _on and _off functions for green,
yellow and red LEDs. This patch
On 00:36 Tue 18 Aug , Wolfgang Denk wrote:
Dear Jean-Christophe PLAGNIOL-VILLARD,
In message 20090817221152.gm23...@game.jcrosoft.org you wrote:
+ printf(Starting %s process...\n, __FUNCTION__);
+ sprintf(cmd, run );
+ sprintf(img, sysrstcmd);
+ argv[0] = cmd;
+ argv[1
Hi,
please pull
The following changes since commit 7dedefdf749ff02c1086f7ddb8cb83a77b00d030:
John Schmoller (1):
flash: Fix CFI buffer size bug
are available in the git repository at:
git://git.denx.de/u-boot-arm.git master
Albin Tonnerre (1):
Update the mtd driver name in
On 15:45 Fri 14 Aug , Kumar Gala wrote:
On Aug 14, 2009, at 3:13 PM, Jean-Christophe PLAGNIOL-VILLARD wrote:
On 14:00 Fri 14 Aug , Kumar Gala wrote:
Added a arch_preboot() function that cpu specific code can
implement to
allow for various modifications to the state of the machine
On 16:24 Fri 14 Aug , Frederik Kriewitz wrote:
I'm a bit confused about the u-boot code which reads the OMAP die id.
From the OMAP TRM:
CONTROL.CONTROL_DIE_ID[127:0]
Address: 0x4830A218
Size: 128
u-boot code:
On 17:02 Sat 15 Aug , Frederik Kriewitz wrote:
On Sat, Aug 15, 2009 at 4:35 PM, Jean-Christophe
PLAGNIOL-VILLARDplagn...@jcrosoft.com wrote:
Honnesty it's not really important the order except you have a special need
it's really a personnal preference
I intent to use some bytes of the
On 13:00 Thu 13 Aug , Albin Tonnerre wrote:
On Sat, Aug 01, 2009 at 10:59:00PM +0200, Jean-Christophe PLAGNIOL-VILLARD
wrote :
On 17:40 Fri 31 Jul , Albin Tonnerre wrote:
Hi Wolfgang and Jean-Christophe,
Is this patch being left aside on purpose, or did it get under
/imx27lite.h
Acked-by: Jean-Christophe PLAGNIOL-VILLARD plagn...@jcrosoft.com
Scott could you applied on your tree as this one need the nand patch that you
handle
Best Regards,
J.
___
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo
On 14:00 Fri 14 Aug , Kumar Gala wrote:
Added a arch_preboot() function that cpu specific code can implement to
allow for various modifications to the state of the machine right before
we boot. This can be useful to setup register state to a specific
configuration.
Signed-off-by: Kumar
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD plagn...@jcrosoft.com
---
include/net.h |1 +
net/eth.c | 17 +
2 files changed, 6 insertions(+), 12 deletions(-)
diff --git a/include/net.h b/include/net.h
index 4a03717..2a8a12d 100644
--- a/include/net.h
+++ b/include
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD plagn...@jcrosoft.com
---
board/netstar/eeprom.c |3 +-
board/voiceblue/eeprom.c |3 +-
drivers/net/smc9.c | 420 +++--
drivers/net/smc9.h |8 +-
include
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD plagn...@jcrosoft.com
---
include/net.h |2 ++
net/eth.c | 28 +---
2 files changed, 27 insertions(+), 3 deletions(-)
diff --git a/include/net.h b/include/net.h
index 2a8a12d..dc4ae41 100644
--- a/include/net.h
On 21:12 Wed 12 Aug , Wolfgang Denk wrote:
Dear Jean-Christophe PLAGNIOL-VILLARD,
In message 1250023747-20224-3-git-send-email-plagn...@jcrosoft.com you
wrote:
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD plagn...@jcrosoft.com
...
#ifdef CONFIG_SMC_USE_32_BIT
-#define
On 08:54 Wed 12 Aug , Ben Warren wrote:
Jean-Christophe,
Jean-Christophe PLAGNIOL-VILLARD wrote:
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD plagn...@jcrosoft.com
I already posted a patch that does this and asked for help testing.
It is available in the net/next repo. If you find
On 20:58 Wed 12 Aug , Wolfgang Denk wrote:
Dear Jean-Christophe PLAGNIOL-VILLARD,
In message 1250023747-20224-2-git-send-email-plagn...@jcrosoft.com you
wrote:
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD plagn...@jcrosoft.com
---
include/net.h |2 ++
net/eth.c | 28
On 20:50 Wed 12 Aug , Wolfgang Denk wrote:
Dear Jean-Christophe PLAGNIOL-VILLARD,
In message 1250023747-20224-1-git-send-email-plagn...@jcrosoft.com you
wrote:
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD plagn...@jcrosoft.com
---
include/net.h |1 +
net/eth.c | 17
1 - 100 of 1501 matches
Mail list logo
