2015-04-03 16:26 GMT+02:00 Michael Trimarchi mich...@amarulasolutions.com:
Hi
Increase the divisor of the clock
MXC_CCM_CSCDR1_USDHC[X]_PODF_MASK
MXC_CCM_CSCDR1_USDHC[X]_PODF_OFFSET
I'm not sure because I have not a board and no time before Easter
to open documentation ;)
Michael
Hi
2015-03-30 17:32 GMT+02:00 Marco Cavallini cavallini.k...@gmail.com:
Hello,
I am probably working on a 'buggy hardware' based on i.MX6 that isn't
able to manage a SDcard speed properly.
I mean, u-boot starts, but as soon as I try to perform a fatload if
the uImage the command won't work
Hello,
I am probably working on a 'buggy hardware' based on i.MX6 that isn't
able to manage a SDcard speed properly.
I mean, u-boot starts, but as soon as I try to perform a fatload if
the uImage the command won't work properly.
I had the possibility to test the SoM on another carrier with a
Hello,
I'd like to know if exists a method to store in eMMC a bootolader
without kobs-ng, so without using linux, but simply running a command
from u-boot.
I booted my i.MX28 system (I have the same question for i.MX6 as well)
using the u-boot.sb (u-boot-2015.01 with SPL) file loaded with mxsldr
2015-02-23 16:03 GMT+01:00 Otavio Salvador ota...@ossystems.com.br:
On Mon, Feb 23, 2015 at 11:57 AM, Marco Cavallini
cavallini.k...@gmail.com wrote:
2015-02-23 15:20 GMT+01:00 Fabio Estevam feste...@gmail.com:
Hi Marco,
On Mon, Feb 23, 2015 at 11:11 AM, Marco Cavallini
cavallini.k
Signed-off-by: Marco Cavallini m.cavall...@koansoftware.com
---
arch/arm/cpu/arm926ejs/mxs/spl_mem_init.c | 18 ++
1 file changed, 18 insertions(+)
diff --git a/arch/arm/cpu/arm926ejs/mxs/spl_mem_init.c
b/arch/arm/cpu/arm926ejs/mxs/spl_mem_init.c
index a744e5d..9e11288 100644
2015-02-23 15:20 GMT+01:00 Fabio Estevam feste...@gmail.com:
Hi Marco,
On Mon, Feb 23, 2015 at 11:11 AM, Marco Cavallini
cavallini.k...@gmail.com wrote:
Hello,
I'd like to know if exists a method to store in eMMC a bootolader
without kobs-ng, so without using linux, but simply running
2015-02-21 15:00 GMT+01:00 Fabio Estevam feste...@gmail.com:
Hi Marco,
[Please keep the list on Cc.]
On Sat, Feb 21, 2015 at 11:13 AM, Marco Cavallini
cavallini.k...@gmail.com wrote:
Hi Fabio,
I moved to u-boot GIT master today (21 Feb 2015)
I set up my DDR settings, defined
Hello,
I'm trying to send a patch using my gmail web account, but I
continuosly receive the following message.
Message rejected. No base64 encoded MIME text parts allowed
Is there a solution?
TIA
--
Marco
___
U-Boot mailing list
U-Boot@lists.denx.de
, I hope it is ok.
0001-spl_mem_init.c-Added-support-for-mDDR-in-SPL-for-i.M.patch
Cheers,
--
Marco Cavallini | KOAN sas | Bergamo - Italia
embedded and real-time software engineering
Phone:+39-035-255.235 - Fax:+39-178-22.39.748
http://www.KoanSoftware.com
2015-02-12 16:57 GMT+01:00 Marco
Hi,
On a custom i.MX28 board I am using u-boot-2015.01.
The debug port DUART is not the same as i.MX28, so I changed these
settings in iomux.c:
const iomux_cfg_t iomux_setup[] = {
/* DUART */
// MX28_PAD_PWM0__DUART_RX,
// MX28_PAD_PWM1__DUART_TX,
/*
Hi,
On a custom i.MX28 board I am using u-boot-2015.01.
The debug port DUART is not the same as i.MX28, so I changed these
settings in iomux.c:
const iomux_cfg_t iomux_setup[] = {
/* DUART */
// MX28_PAD_PWM0__DUART_RX,
// MX28_PAD_PWM1__DUART_TX,
/* DUART */
/* Unconfigure BOOT ROM
Your mail to 'U-Boot' is being held until the list moderator can
review it for approval.
Is this list moderated ?
___
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
\n, erased);
after uboot partition erasing.
Can you help me?
Posting output messages of the procedure may help.
Cordiali Saluti / Kindest Regards / mit freundlichen GrĂ¼ssen
--
Marco Cavallini | KOAN sas | Bergamo - Italia
embedded and real-time software engineering
Phone:+39-035-255.235
14 matches
Mail list logo