Dear Scott,
could you please test the following patch
on top of this big patch to see if ecc.strength
problem goes away? I can integrate it into big
one then.
From dffea1f073c546ab88f37f219f66d9d1478d4cf1 Mon Sep 17 00:00:00 2001
From: Sergey Lapin sla...@ossfans.org
Date: Thu, 17 Jan 2013 18:29
On Fri, Jan 18, 2013 at 10:39:29PM +1300, Chris Packham wrote:
Putting my IPv6 promoter hat on I hope that it won't stay dead for long :)
From my side, IPv6 is long awaited feature by me and various people,
so it won't stay dead.
___
U-Boot mailing
Hi, Josh
diff --git a/drivers/mtd/nand/atmel_nand.c b/drivers/mtd/nand/atmel_nand.c
index b09e7b7..9cdf35b 100644
--- a/drivers/mtd/nand/atmel_nand.c
+++ b/drivers/mtd/nand/atmel_nand.c
@@ -709,6 +709,7 @@ static int atmel_pmecc_nand_init_params(struct nand_chip
*nand,
Dear Scott,
could you please test the following patch
on top of this big patch to see if ecc.strength
problem goes away? I can integrate it into big
one then.
From dffea1f073c546ab88f37f219f66d9d1478d4cf1 Mon Sep 17 00:00:00 2001
From: Sergey Lapin sla...@ossfans.org
Date: Thu, 17 Jan
Dear Scott,
thanks a lot for your review,
see below.
On Wed, Jan 16, 2013 at 04:09:45PM -0600, Scott Wood wrote:
On 01/14/2013 07:46:50 AM, Sergey Lapin wrote:
This patch is essentially an update of u-boot MTD subsystem to
the state of Linux-3.7.1 with exclusion of some bits:
- the update
Dear Scott,
I tried booting on P2020RDB-PC_NAND, and got this:
L2:512 KB already enabled, moving to 0xf8f8
NAND: BUG: failure at nand_base.c:3214/nand_scan_tail()!
BUG!
### ERROR ### Please RESET the board ###
It boots fine without this patch. nand_base.c:3214 is complaining
On Mon, Jan 14, 2013 at 08:30:03AM -0500, Sergey Lapin wrote:
From: Brian Norris computersforpe...@gmail.com
This patch is essentially an update of u-boot MTD subsystem to
the state of Linux-3.7.1 with exclusion of some bits:
- the update is concentrated on NAND, no onenand or CFI/NOR/SPI
On Mon, Jan 14, 2013 at 08:30:03AM -0500, Sergey Lapin wrote:
From: Brian Norris computersforpe...@gmail.com
Sorry about this - will fix and resubmit.
___
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
depend on this change.
Other changes, as you can see, are minor, easily reviewable,
and can be managed by single person.
On 12/28/2012 05:19:17 AM, Sergey Lapin wrote:
Signed-off-by: Sergey Lapin sla...@ossfans.org
---
Warning: no testing, except for single board,
was made
On Fri, Dec 28, 2012 at 06:59:53AM -0700, Tom Rini wrote:
On Fri, Dec 28, 2012 at 07:17:42AM -0500, Sergey Lapin wrote:
Hi, all!
As I failed to submit 250KB patch to the list
I will send this pull request
This patch is not for inclusion yet.
This patch is just update of u-boot
On Sat, Dec 29, 2012 at 10:52:50PM +0100, Wolfgang Denk wrote:
Dear Sergey Lapin,
In message 20121229205429.ga9...@build.ihdev.net you wrote:
First, while I appreciate the effort, I'd rather us sync with v3.7
release rather than the in-flux v3.8. Second, can you please look
On Sat, Dec 29, 2012 at 05:20:48PM -0500, Sergey Lapin wrote:
On Sat, Dec 29, 2012 at 10:52:50PM +0100, Wolfgang Denk wrote:
Dear Sergey Lapin,
In message 20121229205429.ga9...@build.ihdev.net you wrote:
First, while I appreciate the effort, I'd rather us sync with v3.7
release
On Sun, Dec 30, 2012 at 12:33:31AM +0100, Wolfgang Denk wrote:
Dear Sergey Lapin,
In message 20121229231332.gc9...@build.ihdev.net you wrote:
Tom is right when asking to use a stable kernel tree version as
starting point. Said interesting changes may be added in a second
step
callback list entries for SPL (2012-12-22 05:57:16 -0700)
are available in the git repository at:
git://github.com/slapin/uboot-allwinner.git upstream-mtd
Sergey Lapin (1):
MTD resync from Linux-3.8-rc2+ (master)
common/cmd_nand.c | 18 +-
drivers/mtd/Makefile
On Fri, Dec 28, 2012 at 02:51:52PM +0100, Wolfgang Denk wrote:
Dear Sergey Lapin,
In message 20121228121741.ga29...@build.ihdev.net you wrote:
As I failed to submit 250KB patch to the list
You did not fail. You just have to be patient until a moderator finds
time to review
Hi, all!
As u-boot MTD layer is from kernel 2.6.30 (if I'm right),
it misses a lot of current large NAND chips support.
Is it possible to update it, or any plans to do so?
I don't want to provide hacks on top of it or workaround
it in drivers, as current Linux mtd supports these and
what is
On Tue, Jan 31, 2012 at 03:03:55PM +0100, Matthias Fuchs wrote:
Hi,
I have a problem booting the current u-boot-imx version
on a MX28EVK via USB. The i.MX28 CPU supports a special boot mode
where the image (sb boot stream) is downloaded via USB device
(all DIP switches in position 'off' on
On Sun, Jan 29, 2012 at 08:54:22PM +0530, jagan wrote:
Hi,
I need an info, what are the changes that can be added to plain u-boot that
supports a particular board.
Please point-out any specific doc or links.
Thanks for your time.
Regards,
Jagan.
That really depends on is board
On Thu, Jan 26, 2012 at 05:39:13PM +0100, Pali Rohár wrote:
On Thursday 26 January 2012 11:25:59 Sergey Lapin wrote:
On Wed, Jan 25, 2012 at 11:00:34PM +0100, Marek Vasut wrote:
What do you mean, you don't need xloader, u-boot SPL can replace it.
Yes and no. No, becaue you nor I
On Wed, Jan 25, 2012 at 08:57:19PM +0100, Pali Rohár wrote:
On Wednesday 25 January 2012 19:18:50 Marek Vasut wrote:
Do you need this command if you already have common/menu.c?
I need menu which can work with ANSI terminal and framebuffer on device
screen. Something which can easy
On Wed, Jan 25, 2012 at 11:00:34PM +0100, Marek Vasut wrote:
On Wednesday 25 January 2012 22:29:16 Marek Vasut wrote:
On Wednesday 25 January 2012 21:56:37 Marek Vasut wrote:
On Wednesday 25 January 2012 19:20:01 Marek Vasut wrote:
So why not just replace the bootloader right
On Tue, Jan 24, 2012 at 03:27:57PM +0100, Pali Rohár wrote:
This patch series add support for new board Nokia RX-51 (aka N900).
Last two patches adding on screen bootmenu support.
This series supersedes the last sent version.
A quick offtopic question - how do you replace boot loader on N900?
Hi, all!
We have a board, based on s3c2416, with 128MB of RAM
and 1GB of NAND flash.
RAM is organized as 2 memory banks with far placed bases:
TOP
UNUSED 64MB
64MB SDRAM
--- 128MB segment base 1 -
UNUSED 64MB
64MB SDRAM
-- 128MB segment base 0 --
BOTTOM
So we could have only 64MB
On Tue, Dec 13, 2011 at 05:24:22PM +0100, Wolfgang Denk wrote:
Dear Sergey Lapin,
In message 20111213160810.ga27...@build.ihdev.net you wrote:
We have a board, based on s3c2416, with 128MB of RAM
and 1GB of NAND flash.
RAM is organized as 2 memory banks with far placed bases:
TOP
Hi, all!
Is it possible to use u-boot's tftp client
in v6-only setup?
If not, is there some known working tftp/ipv6 implementation?
Thanks a lot,
S.
___
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
On Thu, Jun 09, 2011 at 11:13:25AM +0200, Reinhard Meyer wrote:
Dear Sergey Lapin,
Make AFEB9260 build again.
Based on fix for AT91SAM9260EK.
Signed-off-by: Sergey Lapin sla...@ossfans.org
---
Cleaned-up a bit
board/afeb9260/afeb9260.c | 103
Make AFEB9260 build again.
Based on fix for AT91SAM9260EK.
Signed-off-by: Sergey Lapin sla...@ossfans.org
---
Fixed unneeded 1s in defines in config .h
Removed most undefs.
Setting SoC name in config .h
board/afeb9260/afeb9260.c | 103 ---
include
On Thu, Jun 09, 2011 at 11:12:15AM -0400, Sergey Lapin wrote:
Make AFEB9260 build again.
Based on fix for AT91SAM9260EK.
Signed-off-by: Sergey Lapin sla...@ossfans.org
---
Fixed unneeded 1s in defines in config .h
Removed most undefs.
Setting SoC name in config .h
board/afeb9260
Make AFEB9260 build again.
Based on fix for AT91SAM9260EK.
Signed-off-by: Sergey Lapin sla...@ossfans.org
---
Fixed unneeded 1s in defines in board configuration
Removed most undefs in board configuration
Setting SoC name in board configuration
board/afeb9260/afeb9260.c | 101
Make AFEB9260 build again.
Based on fix for AT91SAM9260EK.
Signed-off-by: Sergey Lapin sla...@ossfans.org
---
Cleaned-up a bit
board/afeb9260/afeb9260.c | 103 ---
boards.cfg |2 +-
include/configs/afeb9260.h | 28 +---
3
Make AFEB9260 build again.
Signed-off-by: Sergey Lapin sla...@ossfans.org
---
board/afeb9260/afeb9260.c | 103 ---
boards.cfg |2 +-
include/configs/afeb9260.h | 27 +---
3 files changed, 78 insertions(+), 54 deletions
Make AFEB9260 build again.
Signed-off-by: Sergey Lapin sla...@ossfans.org
---
board/afeb9260/afeb9260.c | 103 ---
boards.cfg |2 +-
include/configs/afeb9260.h | 27 +---
3 files changed, 78 insertions(+), 54 deletions
Hi, all!
I'm trying to implement splash screen on OMAP35xx-based device
with 128x128 1bpp display connected using RFBI, plain parallel interface.
Display has controller and own memory, and is controlled with parallel
interface, 8-bit wide data bus and signals.
This display works under Linux, but
On Wed, May 13, 2009 at 01:16:51AM +0200, Jean-Christophe PLAGNIOL-VILLARD
wrote:
On 12:25 Tue 12 May , Sergey Lapin wrote:
AFEB9260 uses PA10, PA11 for ETX2 and ETX3.
Also, due to extarnal pull-up on IRQ line, Micrel PHY ID is 1 after reset
sequence,
not 0.
Signed-off
Signed-off-by: Sergey Lapin sla...@ossfans.org
---
board/afeb9260/afeb9260.c |2 +-
cpu/arm926ejs/at91/at91sam9260_macb.c |2 +-
2 files changed, 2 insertions(+), 2 deletions(-)
diff --git a/board/afeb9260/afeb9260.c b/board/afeb9260/afeb9260.c
index 024db2b..a247663 100644
On Sat, Apr 04, 2009 at 04:06:34PM +0200, Jean-Christophe PLAGNIOL-VILLARD
wrote:
The timer has been rewrote with a precision at ~0,18%
Works perfectly with afeb9260
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD plagn...@jcrosoft.com
Tested-by: Sergey Lapin sla...@ossfans.org
But the config file for afeb9260 sets it to a value of 8598,
and I can't change that as I don't know that board, but it's
near enough to 1 to accept that.
And I noticed that only because I had the check there in the
first place, so it didn't compile with MAKEALL when I only
Hi, all!
I am used to build at91 board using Angstrom EABI toolchain (gcc-4.2.4)
without any problems. Now I try to build PXA board and have the
following error on final link stage: (I build master branch)
cd /home/slapin/u-boot
~/openedhand/tmp/cross/bin/arm-angstrom-linux-gnueabi-ld -Bstatic
On Wed, Oct 29, 2008 at 12:04:25PM +0300, Sergey Lapin wrote:
On Sun, Oct 26, 2008 at 10:26:32PM +0300, Sergey Lapin wrote:
This patch provides support for AFEB9260 board, a product of
OpenSource hardware and software. Some commertial projects
are made with this design. A board is basically
On Sun, Oct 26, 2008 at 10:26:32PM +0300, Sergey Lapin wrote:
This patch provides support for AFEB9260 board, a product of
OpenSource hardware and software. Some commertial projects
are made with this design. A board is basically AT91SAM9260-EK
with some modifications and different peripherals
experience in
hardware design.
More info: http://groups.google.com/group/arm9fpga-evolution-board
(In Russian only, sorry).
Subversion repository: svn://194.85.238.22/home/users/george/svn/arm9eb
Signed-off-by: Sergey Lapin [EMAIL PROTECTED]
---
All suggested changes handled (If I forgot something
experience in
hardware design.
More info: http://groups.google.com/group/arm9fpga-evolution-board
(In Russian only, sorry).
Subversion repository: svn://194.85.238.22/home/users/george/svn/arm9eb
Signed-off-by: Sergey Lapin [EMAIL PROTECTED]
---
Added forgotten CFG_ - CONFIG_SYS_ conversions
Added
On Wed, Oct 22, 2008 at 11:49:44PM +0200, Jean-Christophe PLAGNIOL-VILLARD
wrote:
On 02:29 Fri 15 Aug , Sergey Lapin wrote:
Dear Jean-Christophe,
thanks a lot for your review.
Are you from ADI?
No, but this file structure is a lot based on blackfin watchdog
and I have too little code
Hi, all!
On Mon, Sep 29, 2008 at 11:52:40PM +0400, Sergey Lapin wrote:
This patch provides support for AFEB9260 board, a product of
OpenSource hardware and software. Some commertial projects
are made with this design. A board is basically AT91SAM9260-EK
with some modifications and different
experience in
hardware design.
More info: http://groups.google.com/group/arm9fpga-evolution-board
(In Russian only, sorry).
Subversion repository: svn://194.85.238.22/home/users/george/svn/arm9eb
Signed-off-by: Sergey Lapin [EMAIL PROTECTED]
---
This is rebased version of previous one
experience in
hardware design.
More info: http://groups.google.com/group/arm9fpga-evolution-board
(In Russian only, sorry).
Subversion repository: svn://194.85.238.22/home/users/george/svn/arm9eb
Signed-off-by: Sergey Lapin [EMAIL PROTECTED]
---
MAKEALL
experience in
hardware design.
More info: http://groups.google.com/group/arm9fpga-evolution-board
(In Russian only, sorry).
Subversion repository: svn://194.85.238.22/home/users/george/svn/arm9eb
Signed-off-by: Sergey Lapin [EMAIL PROTECTED]
---
Updated after review, added email.
---
MAKEALL
experience in
hardware design.
More info: http://groups.google.com/group/arm9fpga-evolution-board
(In Russian only, sorry).
Subversion repository: svn://194.85.238.22/home/users/george/svn/arm9eb
Signed-off-by: Sergey Lapin [EMAIL PROTECTED]
---
Makefile |3 +
board/afeb9260
Signed-off-by: Sergey Lapin [EMAIL PROTECTED]
---
cpu/arm926ejs/at91/Makefile |1 +
cpu/arm926ejs/at91/watchdog.c | 35 +++
2 files changed, 36 insertions(+), 0 deletions(-)
create mode 100644 cpu/arm926ejs/at91/watchdog.c
diff --git a/cpu/arm926ejs/at91
On Fri, Aug 15, 2008 at 02:29:26AM +0400, Sergey Lapin wrote:
Signed-off-by: Sergey Lapin [EMAIL PROTECTED]
---
cpu/arm926ejs/at91/Makefile |1 +
cpu/arm926ejs/at91/watchdog.c | 35 +++
2 files changed, 36 insertions(+), 0 deletions(-)
create mode
Signed-off-by: Sergey Lapin [EMAIL PROTECTED]
---
cpu/arm926ejs/at91/Makefile |1 +
cpu/arm926ejs/at91/watchdog.c | 38 ++
2 files changed, 39 insertions(+), 0 deletions(-)
create mode 100644 cpu/arm926ejs/at91/watchdog.c
diff --git a/cpu/arm926ejs
On Fri, Aug 08, 2008 at 11:55:29AM +0400, Sergey Lapin wrote:
This patch provides support for AFEB9260 board, a product of
OpenSource hardware and software. Some commertial projects
are made with this design. A board is basically AT91SAM9260-EK
with some modifications and different peripherals
On Sat, Aug 09, 2008 at 12:35:29AM +0200, Jean-Christophe PLAGNIOL-VILLARD
wrote:
On 01:37 Sat 09 Aug , Sergey Lapin wrote:
From: Sergey Lapin [EMAIL PROTECTED]
Fix for page size of AT45DB021. Also adding bigger AT45DB081
which comes with some newer boards.
Signed-off
From: Sergey Lapin [EMAIL PROTECTED]
Fix for page size of AT45DB021. Also adding bigger AT45DB081
which comes with some newer boards.
Signed-off-by: Sergey Lapin [EMAIL PROTECTED]
---
drivers/mtd/dataflash.c | 15 ++-
include/dataflash.h |2 +-
2 files changed, 15
Fix for page size of AT45DB021. Also adding bigger AT45DB081
which comes with some newer boards.
Signed-off-by: Sergey Lapin [EMAIL PROTECTED]
---
drivers/mtd/dataflash.c | 15 ++-
include/dataflash.h |2 +-
2 files changed, 15 insertions(+), 2 deletions(-)
diff --git
55 matches
Mail list logo
