er Architecture® processors"
Is that accurate? Is it not available for ARM processors (e.g. A9 CPU
system within Xilinx Zynq 7000 series SoCs) ?
Thanks, Brendan,
--
On 28/5/20 5:14 pm, Brendan Simon (eTRIX) wrote:
> Hi,
>
> Before I embark on my own implementation of a failsafe bootloadi
to get information/documentation on this?*
Finally, I'm looking at migrating to EMMC, maybe with a golden image for
failsafe use, and two partitions for current filesystem and next/upgrade
filesystem.
*Is there any documentation that might be a useful in this use case?*
Thanks, Brendan.
to get information/documentation on this?*
Finally, I'm looking at migrating to EMMC, maybe with a golden image for
failsafe use, and two partitions for current filesystem and next/upgrade
filesystem.
*Is there any documentation that might be a useful in this use case?*
Thanks, Brendan.
In ft_fixup_enet_phy_connect_type(), use strlen() instead of sizeof() on
the pointer result of phy_string_for_interface().
sizeof() was returning the size of the pointer (4 bytes), resulting in
the phy-connection-type being set to "rgmi" rather than "rgmii-id".
Signed-off-by
I have stored multiple device trees in my emmc (ext4 formatted) partition
and I want to load a certain device tree file from emmc, but if this fails
(i.e. the device tree file doesn't exist) it should default to a device tree
that is stored in memory.
For example if I run this:
I get a return
I have stored multiple device trees in my emmc (ext4 formatted) partition and
I want to load a certain device tree file from emmc, but if this fails (i.e.
the device tree file doesn't exist) it should default to a device tree that
is stored in memory.
For example if I run this:
I get a return
I am storing some information regarding my board within EEPROM (in memory
after I use the >eeprom read command) and I was wondering if it was possible
for me to somehow read from memory and store the values into an environment
variable.
I have done a search but could not find anything of
Hello,
I am using an Freescale/nxp mx6solo and I want to test that the watchdog
timer is working as intended. I have enabled it on my board and have
confirmed it during boot
> U-Boot SPL 2015.04-g0f11429-dirty (Jan 18 2017 - 05:42:24)
>
> Part number: VSM-SOLO-102
> Assembly: AS151004858
>
as
supplied by NXP
(http://www.nxp.com/assets/documents/data/en/reference-manuals/IMX6SDLRM.pdf)
Any help would be greatly appreciated.
Regards,
Brendan
___
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
repository?
Any help would be greatly appreciated, I cannot find any in depth
documentation relating to this so I am looking for any resources available.
Regards,
Brendan
--
View this message in context:
http://u-boot.10912.n7.nabble.com/Enable-redundant-u-boot-environment-for-iMX6-Yocto-tp276498
Hello,
I have a VAR-SOM-MX6 with the following details:
Board: Variscite VAR_SOM_MX6 SOM-Solo
SOC_FAMILY = "mx6:mx6q:mx6dl"
PREFERRED_PROVIDER_virtual/kernel_var-som-mx6 ?= "linux-variscite"
PREFERRED_VERSION_linux-imx_mx6 = "4.1.15"
and the following u-boot details:
U-Boot SPL
Hi Wolfgang,
On 7/12/2015 5:23 PM, Wolfgang Denk wrote:
> Dear Brendan,
>
> In message <5663b74e.7000...@etrix.com.au> you wrote:
>> Is there any documentation or u-boot support for having a list of boot
>> images to try, starting with the first in the list, trying 1, 2
Hi. see inline comments below ...
On 7/12/2015 8:35 PM, Anatolij Gustschin wrote:
> On Sun, 6 Dec 2015 12:01:08 +1100
> "Brendan Simon (eTRIX)" <brendan.si...@etrix.com.au> wrote:
>
>> Here is info from /proc/mtd and my /etc/fw_env.config.
>
off partition 3 of eMMC, then partition2 of eMMC, then
partition 2 of SD card, then tftp/nfs ?
I've seen some info on google that says this is possible. I'm just
looking for good documentation that can explain how to set it all up.
Thanks,
Brendan
find out the correct settings. Is there a command in u-boot
itself which will report the correct information?
Thanks,
Brendan.
___
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
Hi, hope everything is well.
I would like to invite you to www.uniqueBidWin.com . An auction where new
Iphone 32Gs is sold for $7.07
Find a bonuss just for yourself.
Want to make money from home, visit http://uniquebidwin.com/affiliate/
Best
___
U-Boot
16 matches
Mail list logo