From: Lukas Funke
This series enables the CPU reset in the SPL for ZynqMP based platforms.
This only works if CONFIG_SYSRESET is disabled. This is usually the
case since the the regular sysreset requires bl31 firmware to be loaded
in order to hand the sysreset over to PMU firmware. In SPL we
From: Lukas Funke
This commit enables SPL to reset the CPU via PMU-firmware. The usual
reset mechanism requires bl31 to be loaded which may not be the case in
SPL.
Signed-off-by: Lukas Funke
---
Changes in v3:
- Use 'ZYNQMP_PM_RESET_SOFT' directly
- Add comment on what happens if
From: Lukas Funke
Add driver to access ZynqMP efuses. This is a u-boot port of [1].
Note: Accessing eFuses requires eFuse access to be enabled in the
underlying PMU firmware.
[1]
https://lore.kernel.org/all/20240224114516.86365-8-srinivas.kandaga...@linaro.org/
Signed-off-by: Lukas Funke
From: Lukas Funke
Add functions to access efuses through PMU firmware
interface.
Signed-off-by: Lukas Funke
---
(no changes since v1)
drivers/firmware/firmware-zynqmp.c | 31 ++
include/zynqmp_firmware.h | 2 ++
2 files changed, 33 insertions(+)
diff
From: Lukas Funke
Use common zynqmp_pm_get_chipid() function to get the chip revision
Signed-off-by: Lukas Funke
---
(no changes since v1)
drivers/soc/soc_xilinx_zynqmp.c | 21 +
1 file changed, 9 insertions(+), 12 deletions(-)
diff --git
From: Lukas Funke
Use common zynqmp_pm_get_chipid() function to get the chip revision
Signed-off-by: Lukas Funke
---
(no changes since v1)
drivers/soc/soc_xilinx_versal.c | 13 ++---
1 file changed, 6 insertions(+), 7 deletions(-)
diff --git a/drivers/soc/soc_xilinx_versal.c
From: Lukas Funke
Use common zynqmp_pm_get_chipid() function to get the chip revision
Signed-off-by: Lukas Funke
---
(no changes since v1)
drivers/soc/soc_xilinx_versal_net.c | 13 ++---
1 file changed, 6 insertions(+), 7 deletions(-)
diff --git
From: Lukas Funke
Enable CMD_FUSE and ZYNQMP_EFUSE in order to be able to write
ZyqnMP eFuses from within the bootloader.
Signed-off-by: Lukas Funke
---
(no changes since v1)
configs/xilinx_zynqmp_kria_defconfig | 2 ++
1 file changed, 2 insertions(+)
diff --git
From: Lukas Funke
Enable CMD_FUSE and ZYNQMP_EFUSE in order to be able to write
ZyqnMP eFuses from within the bootloader for Kria SoM.
Signed-off-by: Lukas Funke
---
(no changes since v1)
configs/xilinx_zynqmp_virt_defconfig | 2 ++
1 file changed, 2 insertions(+)
diff --git
From: Lukas Funke
This series adds a driver to read and write ZynqMP eFuses [1]. The
driver can be accessed by the 'fuse read' and 'fuse write' commands
Example:
=> fuse read 0 0xc 3
Reading bank 0:
Word 0x000c: 3cb16685 013af244 4000
Note: Accessing eFuses requires eFuse access to
From: Lukas Funke
This series enables the CPU reset in the SPL for ZynqMP based platforms.
This only works if CONFIG_SYSRESET is disabled. This is usually the
case since the the regular sysreset requires bl31 firmware to be loaded
in order to hand the sysreset over to PMU firmware. In SPL we
From: Lukas Funke
This commit enables SPL to reset the CPU via PMU-firmware. The usual
reset mechanism requires bl31 to be loaded which may not be the case in
SPL.
Signed-off-by: Lukas Funke
---
Changes in v2:
- Drop 2/2 since reworking ZYNQMP_FIRMWARE dependency is out-of-scope
From: Lukas Funke
In order to make CONFIG_IS_ENABLED() work with 'ZYNQMP_FIRMWARE'
introduce an additional Kconfig 'SPL_ZYNQMP_FIRMWARE' which is selected
if and only if ZYNQMP_FIRMWARE is enabled. Driver are adapted such
that they build with and without the config being set.
Signed-off-by:
From: Lukas Funke
This commit enables SPL to reset the CPU via PMU-firmware. The usual
reset mechanism requires bl31 to be loaded which may not be the case in
SPL.
Signed-off-by: Lukas Funke
---
board/xilinx/zynqmp/zynqmp.c | 9 +
1 file changed, 9 insertions(+)
diff --git
From: Lukas Funke
This series enables the CPU reset in the SPL for ZynqMP based platforms.
This only works if CONFIG_SYSRESET is disabled. This is usually the
case since the the regular sysreset requires bl31 firmware to be loaded
in order to hand the sysreset over to PMU firmware. In SPL we
From: Lukas Funke
Add driver to access ZynqMP efuses. This is a u-boot port of [1].
[1]
https://lore.kernel.org/all/20240224114516.86365-8-srinivas.kandaga...@linaro.org/
Signed-off-by: Lukas Funke
---
Changes in v2:
- Drop vendor specific fuse cmd, use existing fuse cmd
- Minor code
From: Lukas Funke
Add functions to access efuses through PMU firmware
interface.
Signed-off-by: Lukas Funke
---
(no changes since v1)
drivers/firmware/firmware-zynqmp.c | 31 ++
include/zynqmp_firmware.h | 2 ++
2 files changed, 33 insertions(+)
diff
From: Lukas Funke
This series adds a driver to read and write ZynqMP eFuses [1]. The
driver can be accessed by the 'fuse read' and 'fuse write' commands
Example:
=> fuse read 0 0xc 3
Reading bank 0:
Word 0x000c: 3cb16685 013af244 4000
Note: Accessing eFuses requires eFuse access to
From: Lukas Funke
Add driver to access ZynqMP efuses. This is a u-boot port of [1].
[1]
https://lore.kernel.org/all/20240224114516.86365-8-srinivas.kandaga...@linaro.org/
Signed-off-by: Lukas Funke
---
drivers/misc/Kconfig| 8 ++
drivers/misc/Makefile | 1 +
From: Lukas Funke
This series adds a driver to read and write ZynqMP eFuses [1]. The
driver can be accessed by the 'efuse_read' and 'efuse_write' subcommands
of the 'zynqmp' command.
Example:
=> zynqmp efuse_read 0xc 0xc
: 85 66 b1 32 43 f2 4a 02 00 00 00 40
From: Lukas Funke
Add subcommands to read/write eFuses using u-boot. The subcommands
through the 'zynqmp' command.
Example:
=> zynqmp efuse_read 0xc 0xc
: 85 36 b1 3c 34 f2 3b 01 00 00 00 40 .f.
---
board/xilinx/zynqmp/cmds.c | 101 +
From: Lukas Funke
Add functions to access efuses through PMU firmware
interface.
Signed-off-by: Lukas Funke
---
drivers/firmware/firmware-zynqmp.c | 31 ++
include/zynqmp_firmware.h | 2 ++
2 files changed, 33 insertions(+)
diff --git
From: Lukas Funke
On ZynqMp there seems to be a dependency between the card-stable bit and
the card-detect bit. The card-stable bit is set *if and only if*
the card-detect bit was set before, indicating that the signal was
stable and reliable during card insertion.
If the card-detect bit is
From: Lukas Funke
On ZynqMp there seems to be a dependency between the card-stable bit and
the card-detect bit. The card-stable bit is set *if and only if*
the card-detect bit was set before, indicating that the signal was
stable and reliable during card insertion.
If the card-detect bit is
From: Lukas Funke
Rename spl_soc_init() to spl_dram_init() because the generic function
name does not reflect what the function actually does. Also
spl_dram_init() is commonly used for dram initialization and should be
called from board_init_f().
Signed-off-by: Lukas Funke
---
Changes in v3:
From: Lukas Funke
Rename spl_soc_init() to spl_dram_init() because the generic function
name does not reflect what the function actually does. Also
spl_dram_init() is commonly used for dram initialization and should be
called from board_init_f().
Signed-off-by: Lukas Funke
---
(no changes
From: Lukas Funke
This patch series renames spl_soc_init() to spl_dram_init() since the
purpose of the function is to initialization the DRAM on sifive/starfive
boards. spl_dram_init() is a commonly used function for this purpose.
Changes in v3:
- Reorganize patches such that each patch can
From: Lukas Funke
Call spl_dram_init() since this is commonly used for dram initialization
in u-boot.
Signed-off-by: Lukas Funke
---
Changes in v2:
- capitalized acronym DRAM
board/starfive/visionfive2/spl.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git
From: Lukas Funke
Rename spl_soc_init() to spl_dram_init() because the generic function
name does not reflect what the function is actually doing. In addition
spl_dram_init() is commonly used for dram initialization and should
be called from board_init_f().
Signed-off-by: Lukas Funke
---
(no
From: Lukas Funke
Call spl_dram_init() since this is commonly used for DRAM initialization
in u-boot.
Signed-off-by: Lukas Funke
---
(no changes since v1)
board/sifive/unleashed/spl.c | 4 ++--
board/sifive/unmatched/spl.c | 4 ++--
2 files changed, 4 insertions(+), 4 deletions(-)
diff
From: Lukas Funke
This patch series renames spl_soc_init() to spl_dram_init() since the
purpose of the function is to initialization the DRAM on sifive/starfive
boards. spl_dram_init() is a commonly used function for this purpose.
Changes in v2:
- capitalized acronym DRAM
Lukas Funke (3):
From: Lukas Funke
This patch series renames spl_soc_init() to spl_dram_init() since the
purpose of the function is to initialization the DRAM on sifive/starfive
boards. spl_dram_init() is a commonly used function for this purpose.
Lukas Funke (3):
arch: riscv: Rename spl_soc_init() to
From: Lukas Funke
Call spl_dram_init() since this is commonly used for dram initialization
in u-boot.
Signed-off-by: Lukas Funke
---
board/sifive/unleashed/spl.c | 4 ++--
board/sifive/unmatched/spl.c | 4 ++--
2 files changed, 4 insertions(+), 4 deletions(-)
diff --git
From: Lukas Funke
Call spl_dram_init() since this is commonly used for dram initialization
in u-boot.
Signed-off-by: Lukas Funke
---
board/starfive/visionfive2/spl.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/board/starfive/visionfive2/spl.c
From: Lukas Funke
Rename spl_soc_init() to spl_dram_init() because the generic function
name does not reflect what the function is actually doing. In addition
spl_dram_init() is commonly used for dram initialization and should
be called from board_init_f().
Signed-off-by: Lukas Funke
---
From: Stefan Herbrechtsmeier
Add function to prevent debug access from being enabled. If the debug
lock is set the debug access cannot be enabled after a soft-reset.
The debug access can only be enabled after a power-on-reset is
performed.
Signed-off-by: Stefan Herbrechtsmeier
Signed-off-by:
From: Stefan Herbrechtsmeier
In non-secure boot mode jtag is restored by the BootROM. In secure boot
mode jtag has to be restored by the trusted application, i.e. the
bootloader.
This commit adds a function to enable the jtag interface on zynq
devices from u-boot.
Signed-off-by: Stefan
From: Stefan Herbrechtsmeier
This commit adds a function to get/set the multiboot register. This
becomes handy in order to ensure a fresh bootimage search after reset.
Signed-off-by: Stefan Herbrechtsmeier
Signed-off-by: Lukas Funke
---
arch/arm/mach-zynq/cpu.c| 19
From: Lukas Funke
This series adds support to enable/disable/lock the jtag interface
from u-boot. This becomes handy if secure boot is used but debugging
should be poissible for non-productions builds.
The series also adds support to get/set the multiboot register in order
to ensure a freash
From: Lukas Funke
Some architectures use spl_board_init() in their SoC specific
implementation. Board developers should be able to add board specific
implementation via spl_board_init(). Hence, introduce a spl_soc_init()
method which is called right before spl_board_init() for SoC
specific
From: Lukas Funke
Rename spl_board_init() to spl_soc_init(). SoC specific
implementation should be separated from board specific implementation
in order to be extended by board developers.
Signed-off-by: Lukas Funke
---
Changes in v3:
- Rephrase Kconfig description and correct minor typo
From: Lukas Funke
Currently some vendors use spl_board_init() for their SoC
specific initialization. This prohibits board developers from adding
board init code using said function. This series introduces a new
function in order to separate SoC init code from board init code.
Changes in v3:
From: Lukas Funke
Rename spl_board_init() to spl_soc_init(). SoC specific
implementation should be separated from board specific implementation
in order to be extended by board developers.
Signed-off-by: Lukas Funke
---
Changes in v2:
- Change spl_arch_init() to spl_soc_init()
From: Lukas Funke
Currently some vendors use spl_board_init() for their SoC
specific initialization. This prohibits board developers from adding
board init code using said function. This series introduces a new
function in order to separate SoC init code from board init code.
Changes in v2:
From: Lukas Funke
Some architectures use spl_board_init() in their SoC specific
implementation. Board developers should be able to add board specific
implementation via spl_board_init(). Hence, introduce a spl_soc_init()
method which is called right before spl_board_init() for SoC
specific
From: Lukas Funke
Some architectures use spl_board_init() in their architecture specific
implementation. Board developers should be able to add board specific
implementation via spl_board_init(). Hence, introduce a spl_arch_init()
method which is called right before spl_board_init() for
From: Lukas Funke
Rename spl_board_init() to spl_arch_init(). Architecture specific
implementation should be separated from board specific implementation
in order to be extended by board developers.
Signed-off-by: Lukas Funke
---
arch/arm/Kconfig | 4 ++--
arch/arm/mach-zynq/spl.c
From: Lukas Funke
Currently some architectures use spl_board_init() for their architecture
specific initialization. This prohibits board developers from adding
board init code using said function. This series introduces a new
function in order to separate arch init code from board init code.
From: Lukas Funke
ZynqMP CG series devices only have two cpus. In this
case the interrupt-affinity property has to adapted, because
cpu3 and cpu4 are missing. By adding a label to the pmu fwnode the
interrupt-affinity can be adapted in a device specific DT.
Signed-off-by: Lukas Funke
---
From: Lukas Funke
Some zynqmp SoCs (the cg series) only have two cpus. Thus, for some
cases the cpu-affinity has to adapted, because cpu3 and cpu4 are
missing. By adding a label to the pmu fwnode the cpu affinity can
be adapted in a device specific dt.
Signed-off-by: Lukas Funke
---
From: Lukas Funke
Forward '%p' format specifier to the underlying format logic in order
to print pointers, especially bitmaps.
Signed-off-by: Lukas Funke
---
Changes in v3:
- Dereference pointer argument (i.e. *value) in the
'setexpr name fmt value' case. This is currently only
supported
From: Lukas Funke
Extend setexpr_get_arg() function in order to handle bitmaps with
length greater than 8 byte. If the bitmap is provided as hex string
the string is parsed into a bitmap.
Signed-off-by: Lukas Funke
---
(no changes since v1)
cmd/setexpr.c | 29 ++---
From: Lukas Funke
The commit enables vsprintf() to handle the '%pbl' format specifier
in order to print bitmaps and its derivatives such as cpumask and
nodemask [1]. This can be used to derive kernel boot parameters from
bitmaks such as 'isolcpu' or 'nohz_full' [2].
[1]
From: Lukas Funke
Prefix the get_arg() function with 'setexpr_' in order to prepare
the removal of the static specifier. The prefix shall denote the origin
of the function.
Signed-off-by: Lukas Funke
---
(no changes since v1)
cmd/setexpr.c | 6 +++---
1 file changed, 3 insertions(+), 3
From: Lukas Funke
Promote 'setexpr_get_arg()' to a public function in order to use it
from the setexpr command and in the printf-internals.
Signed-off-by: Lukas Funke
---
(no changes since v1)
cmd/setexpr.c | 15 +--
include/command.h | 27 +++
2
From: Lukas Funke
Add '%pbl' printf format specifier as descriped in [1].
[1] https://www.kernel.org/doc/Documentation/printk-formats.txt
Signed-off-by: Lukas Funke
---
Changes in v3:
- Remove '%bp' from documentation
- Give an example output in the documentation
doc/develop/printf.rst | 4
From: Lukas Funke
Add a 'hextobarray()' function which converts a hex string to it's
memory representation. This can be used to represent large integer
numbers or bitmasks which do not fit in a regular unsigned long value.
Signed-off-by: Lukas Funke
---
(no changes since v1)
From: Lukas Funke
Add tests to test the bitmap format specifier. Test different bit
widths and access to memory by pointer.
Signed-off-by: Lukas Funke
---
(no changes since v1)
test/cmd/setexpr.c | 22 ++
1 file changed, 22 insertions(+)
diff --git a/test/cmd/setexpr.c
From: Lukas Funke
Add 'for_each_set_bitrange' (from Linux kernel) in order to iterate
over each set bitrange of a bitmap. This becomes handy if one wants
to generate a cpu list i.e. for isolcpu or nohz_full.
Signed-off-by: Lukas Funke
Reviewed-by: Simon Glass
---
(no changes since v1)
From: Lukas Funke
Correctly parse the field width from the format specifier. Before this
commit the field_width was simply ignored.
Signed-off-by: Lukas Funke
---
(no changes since v1)
cmd/printf.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/cmd/printf.c
From: Lukas Funke
This series enables the 'setexpr' command to print "cpu list"-like
bitmaps based on the printk format specifier [1].
One use-case is to pass cpu list [2] based kernel parameter like
'isolcpu', 'nohz_full', irq affinity or RCU related CPU parameter to
the kernel via a separate
From: Lukas Funke
Add generic 'find_next_zero_bit()' implementation in order to enable the
use of the 'for_each_set_bitrange' macro. The implementation is currently
missing for the sandbox-arch and using the function results in a linker
error. The implementation is copied from the 'arm'
From: Lukas Funke
Forward '%p' format specifier to the underlying format logic in order
to print pointers, especially bitmaps.
Signed-off-by: Lukas Funke
---
(no changes since v1)
cmd/printf.c | 29 +
1 file changed, 29 insertions(+)
diff --git a/cmd/printf.c
From: Lukas Funke
The commit enables vsprintf() to handle the '%*pb[l]' format specifier
in order to print bitmaps and its derivatives such as cpumask and
nodemask [1]. This can be used to derive kernel boot parameters from
bitmaks such as 'isolcpu' or 'nohz_full' [2].
[1]
From: Lukas Funke
Add '%*pb[l]' printf format specifier as descriped in [1].
[1] https://www.kernel.org/doc/Documentation/printk-formats.txt
Signed-off-by: Lukas Funke
---
(no changes since v1)
doc/develop/printf.rst | 6 ++
1 file changed, 6 insertions(+)
diff --git
From: Lukas Funke
Add test to test the bitmap format specifier
Signed-off-by: Lukas Funke
---
(no changes since v1)
test/cmd/setexpr.c | 9 +
1 file changed, 9 insertions(+)
diff --git a/test/cmd/setexpr.c b/test/cmd/setexpr.c
index 312593e1e3..4e1c9e983b 100644
---
From: Lukas Funke
Add 'for_each_set_bitrange' (from Linux kernel) in order to iterate
over each set bitrange of a bitmap. This becomes handy if one wants
to generate a cpu list i.e. for isolcpu or nohz_full.
Signed-off-by: Lukas Funke
---
(no changes since v1)
include/linux/bitmap.h | 7
From: Lukas Funke
This series enables the 'setexpr' command to print "cpu list"-like
bitmaps based on the printk format specifier [1].
One use-case is to pass cpu list [2] based kernel parameter like
'isolcpu', 'nohz_full', irq affinity or RCU related CPU parameter to
the kernel via a separate
From: Lukas Funke
Add generic 'find_next_zero_bit' implementation in order to enable the
use of the 'for_each_set_bitrange' macro. The implementation is currently
missing for the sandbox-arch and using the function results in a linker
error.
There are more efficient implementations in the
From: Lukas Funke
The commit enables vsprintf() to handle the '%*pb[l]' format specifier
in order to print bitmaps and its derivatives such as cpumask and
nodemask [1]. This can be used to derive kernel boot parameters from
bitmaks such as 'isolcpu' or 'nohz_full' [2].
[1]
From: Lukas Funke
Forward '%p' format specifier to the underlying format logic in order
to print pointers, especially bitmaps.
Signed-off-by: Lukas Funke
---
cmd/printf.c | 29 +
1 file changed, 29 insertions(+)
diff --git a/cmd/printf.c b/cmd/printf.c
index
From: Lukas Funke
Add 'for_each_set_bitrange' (from Linux kernel) in order to iterate
over each set bitrange of a bitmap. This becomes handy if one wants
to generate a cpu list i.e. for isolcpu or nohz_full.
Signed-off-by: Lukas Funke
---
include/linux/bitmap.h | 7 +++
1 file changed, 7
From: Lukas Funke
Add generic 'find_next_zero_bit' implementation in order to enable the
use of the 'for_each_set_bitrange' macro. The implementation is currently
missing for the sandbox-arch and using the function results in a linker
error.
There are more efficient implementations in the
From: Lukas Funke
This series enables the 'setexpr' command to print "cpu list"-like
bitmaps based on the printk format specifier [1].
One use-case is to pass cpu list [2] based kernel parameter like
'isolcpu', 'nohz_full', irq affinity or RCU related CPU parameter to
the kernel via a separate
From: Lukas Funke
Add test to test the bitmap format specifier
Signed-off-by: Lukas Funke
---
test/cmd/setexpr.c | 9 +
1 file changed, 9 insertions(+)
diff --git a/test/cmd/setexpr.c b/test/cmd/setexpr.c
index 312593e1e3..4e1c9e983b 100644
--- a/test/cmd/setexpr.c
+++
From: Lukas Funke
The argument type of `build_from_git` was changed from string to list
in d71e7116997f14097735f04cc7847f0a68dbc485.
This commit adapts the argument type of all bintools using this
function.
Signed-off-by: Lukas Funke
---
tools/binman/btool/bootgen.py | 2 +-
From: Lukas Funke
Currently the pcap_prog struct variable is pointing to 0x3004 which is
incorrect according to [1]. The variable should point to 0x3000.
[1]
https://www.xilinx.com/htmldocs/registers/ug1087/ug1087-zynq-ultrascale-registers.html#csu___pcap_prog.html
Signed-off-by: Lukas Funke
From: Lukas Funke
This adds a new etype 'xilinx-bootgen'. By using this etype it is
possible to created an signed SPL (FSBL in Xilinx terms) for
ZynqMP boards.
The etype uses Xilinx Bootgen tools in order to transform the SPL into
a bootable image and sign the image with a given primary and
From: Lukas Funke
Add the Xilinx Bootgen as bintool. Xilinx Bootgen is used to create
bootable SPL (FSBL in Xilinx terms) images for Zynq/ZynqMP devices. The
btool creates a signed version of the SPL. Additionally to signing the
key source for the decryption engine can be passend to the boot
From: Lukas Funke
Add test for the 'xilinx-bootgen' etype
Signed-off-by: Lukas Funke
Reviewed-by: Simon Glass
---
Changes in v4:
- Add test to check for missing bootgen tool
Changes in v3:
- Improved test coverage for xilinx-fsbl-auth etype
Changes in v2:
- Fixed typo in dts name
From: Lukas Funke
This series adds one etype to create a verified boot chain for
Xilinx ZynqMP devices. The etype 'xilinx-bootgen' is used to
create a bootable, signed image for ZynqMP boards using the Xilinx
Bootgen tool. The series also contains the corresponding btool for
calling 'bootgen'.
From: Lukas Funke
This adds a new etype 'xilinx-fsbl-auth'. By using this etype it is
possible to created an authenticated SPL (FSBL in Xilinx terms) for
ZynqMP boards.
The etype uses Xilinx Bootgen tools in order to transform the SPL into
a bootable image and sign the image with a given
From: Lukas Funke
This adds a new etype 'u-boot-spl-pubkey-dtb'. The etype adds the public
key from a certificate to the dtb. This creates a '/signature' node which
is turn contains the fields which make up the public key. Usually this
is done by 'mkimage -K'. However, 'binman sign' does not add
From: Lukas Funke
Add test for the 'xilinx_fsbl_auth' etype
Signed-off-by: Lukas Funke
---
Changes in v3:
- Improved test coverage for xilinx-fsbl-auth etype
Changes in v2:
- Fixed typo in dts name
tools/binman/ftest.py | 61 +++
From: Lukas Funke
Add the Xilinx Bootgen as bintool. Xilinx Bootgen is used to create
bootable SPL (FSBL in Xilinx terms) images for Zynq/ZynqMP devices. The
btool creates a signed version of the SPL. Additionally to signing the
key source for the decryption engine can be passend to the boot
From: Lukas Funke
Add documentation for the 'bootgen' bintool
Signed-off-by: Lukas Funke
Reviewed-by: Simon Glass
---
(no changes since v1)
tools/binman/bintools.rst | 12
1 file changed, 12 insertions(+)
diff --git a/tools/binman/bintools.rst b/tools/binman/bintools.rst
From: Lukas Funke
Add btool which calls 'fdt_add_pubkey'
Signed-off-by: Lukas Funke
Reviewed-by: Simon Glass
---
(no changes since v1)
tools/binman/btool/fdt_add_pubkey.py | 67
1 file changed, 67 insertions(+)
create mode 100644
From: Lukas Funke
Add documentation for btool which calls 'fdt_add_pubkey'
Signed-off-by: Lukas Funke
Reviewed-by: Simon Glass
---
Changes in v3:
- Fix rst headline length
tools/binman/bintools.rst | 10 ++
1 file changed, 10 insertions(+)
diff --git a/tools/binman/bintools.rst
From: Lukas Funke
Add test for u_boot_spl_pubkey_dtb. The test adds a public key to the
dtb and checks if the required nodes will be added to the images dtb.
Signed-off-by: Lukas Funke
Reviewed-by: Simon Glass
---
Changes in v3:
- Add newline before main
- Adapted test due to property
From: Lukas Funke
While signing a fit compressed data (i.e. 'blob-ext') is decompressed,
but never compressed again. When compressed data was wrapped in a
section, decompression leads to an error because the outer section had
the original compressed size but the inner entry has the
uncompressed
From: Lukas Funke
The method 'connect_contents_to_file()' calls ObtainsContents() with
'fake_size' argument. Without providing the argument in the blob_dtb
we are not able to call this method without error.
Signed-off-by: Lukas Funke
Reviewed-by: Simon Glass
---
(no changes since v1)
From: Lukas Funke
This series adds two etypes to create a verified boot chain for
Xilinx ZynqMP devices. The first etype 'xilinx-fsbl-auth' is used to
create a bootable, signed image for ZynqMP boards using the Xilinx
Bootgen tool. The second etype 'u-boot-spl-pubkey-dtb' is used to add
a
From: Lukas Funke
Check if elf tools are available when running DecodeElf(). Also
remove superfuous semicolon at line ending.
Signed-off-by: Lukas Funke
Reviewed-by: Simon Glass
---
Changes in v3:
- Improved test coverage regarding missing libelf
- Align error message
tools/binman/elf.py
From: Lukas Funke
Add the Xilinx Bootgen as bintool. Xilinx Bootgen is used to create
bootable SPL (FSBL in Xilinx terms) images for Zynq/ZynqMP devices. The
btool creates a signed version of the SPL. Additionally to signing the
key source for the decryption engine can be passend to the boot
From: Lukas Funke
This adds a new etype 'xilinx_fsbl_auth'. Using this etype it is possible
to created an authenticated SPL (FSBL in Xilinx terms) for ZynqMP boards.
The etype uses Xilinx Bootgen tools in order to transform the SPL into
a bootable image and sign the image with a given primary
From: Lukas Funke
This adds a new etype 'u_boot_spl_pubkey_dtb'. The etype adds the public
key from a certificate to the dtb. This creates a '/signature' node which
is turn contains the fields which make up the public key. Usually this
is done by 'mkimage -K'. However, 'binman sign' does not add
From: Lukas Funke
Add test for the 'xilinx_fsbl_auth' etype
Signed-off-by: Lukas Funke
---
Changes in v2:
- Fixed typo in dts name
tools/binman/ftest.py | 8
tools/binman/test/280_xilinx_fsbl_auth.dts | 23 ++
2 files changed, 31
From: Lukas Funke
Add documentation for the 'bootgen' bintool
Signed-off-by: Lukas Funke
Reviewed-by: Simon Glass
---
(no changes since v1)
tools/binman/bintools.rst | 12
1 file changed, 12 insertions(+)
diff --git a/tools/binman/bintools.rst b/tools/binman/bintools.rst
From: Lukas Funke
Add btool which calls 'fdt_add_pubkey'
Signed-off-by: Lukas Funke
Reviewed-by: Simon Glass
---
(no changes since v1)
tools/binman/btool/fdt_add_pubkey.py | 67
1 file changed, 67 insertions(+)
create mode 100644
From: Lukas Funke
Add documentation for btool which calls 'fdt_add_pubkey'
Signed-off-by: Lukas Funke
Reviewed-by: Simon Glass
---
(no changes since v1)
tools/binman/bintools.rst | 10 ++
1 file changed, 10 insertions(+)
diff --git a/tools/binman/bintools.rst
1 - 100 of 118 matches
Mail list logo