Import the PM8998 and PMI8998 PMIC DTSI files from Linux as well
as the common audio codec in preperation for replacing board DTS files
with upstream.
Taken from kernel tag v6.7
Reviewed-by: Neil Armstrong <neil.armstr...@linaro.org>
Signed-off-by: Caleb Connolly <caleb.conno...@linaro.org>
---
arch/arm/dts/pm8998.dtsi | 130 +++++++++++++++++++++++++++++++++++++++
arch/arm/dts/pmi8998.dtsi | 98 +++++++++++++++++++++++++++++
arch/arm/dts/sdm845-wcd9340.dtsi | 86 ++++++++++++++++++++++++++
3 files changed, 314 insertions(+)
diff --git a/arch/arm/dts/pm8998.dtsi b/arch/arm/dts/pm8998.dtsi
new file mode 100644
index 000000000000..3f82715392c6
--- /dev/null
+++ b/arch/arm/dts/pm8998.dtsi
@@ -0,0 +1,130 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/* Copyright 2018 Google LLC. */
+
+#include <dt-bindings/iio/qcom,spmi-vadc.h>
+#include <dt-bindings/input/linux-event-codes.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/spmi/spmi.h>
+#include <dt-bindings/thermal/thermal.h>
+
+/ {
+ thermal-zones {
+ pm8998-thermal {
+ polling-delay-passive = <250>;
+ polling-delay = <1000>;
+
+ thermal-sensors = <&pm8998_temp>;
+
+ trips {
+ pm8998_alert0: pm8998-alert0 {
+ temperature = <105000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
+ pm8998_crit: pm8998-crit {
+ temperature = <125000>;
+ hysteresis = <2000>;
+ type = "critical";
+ };
+ };
+ };
+ };
+};
+
+&spmi_bus {
+ pm8998_lsid0: pmic@0 {
+ compatible = "qcom,pm8998", "qcom,spmi-pmic";
+ reg = <0x0 SPMI_USID>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ pm8998_pon: pon@800 {
+ compatible = "qcom,pm8998-pon";
+
+ reg = <0x800>;
+ mode-bootloader = <0x2>;
+ mode-recovery = <0x1>;
+
+ pm8998_pwrkey: pwrkey {
+ compatible = "qcom,pm8941-pwrkey";
+ interrupts = <0x0 0x8 0 IRQ_TYPE_EDGE_BOTH>;
+ debounce = <15625>;
+ bias-pull-up;
+ linux,code = <KEY_POWER>;
+ };
+
+ pm8998_resin: resin {
+ compatible = "qcom,pm8941-resin";
+ interrupts = <0x0 0x8 1 IRQ_TYPE_EDGE_BOTH>;
+ debounce = <15625>;
+ bias-pull-up;
+ status = "disabled";
+ };
+ };
+
+ pm8998_temp: temp-alarm@2400 {
+ compatible = "qcom,spmi-temp-alarm";
+ reg = <0x2400>;
+ interrupts = <0x0 0x24 0x0 IRQ_TYPE_EDGE_RISING>;
+ io-channels = <&pm8998_adc ADC5_DIE_TEMP>;
+ io-channel-names = "thermal";
+ #thermal-sensor-cells = <0>;
+ };
+
+ pm8998_coincell: charger@2800 {
+ compatible = "qcom,pm8998-coincell",
"qcom,pm8941-coincell";
+ reg = <0x2800>;
+
+ status = "disabled";
+ };
+
+ pm8998_adc: adc@3100 {
+ compatible = "qcom,spmi-adc-rev2";
+ reg = <0x3100>;
+ interrupts = <0x0 0x31 0x0 IRQ_TYPE_EDGE_RISING>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ #io-channel-cells = <1>;
+
+ channel@6 {
+ reg = <ADC5_DIE_TEMP>;
+ label = "die_temp";
+ };
+ };
+
+ pm8998_adc_tm: adc-tm@3400 {
+ compatible = "qcom,spmi-adc-tm-hc";
+ reg = <0x3400>;
+ interrupts = <0x0 0x34 0x0 IRQ_TYPE_EDGE_RISING>;
+ #thermal-sensor-cells = <1>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ rtc@6000 {
+ compatible = "qcom,pm8941-rtc";
+ reg = <0x6000>, <0x6100>;
+ reg-names = "rtc", "alarm";
+ interrupts = <0x0 0x61 0x1 IRQ_TYPE_EDGE_RISING>;
+ };
+
+ pm8998_gpios: gpio@c000 {
+ compatible = "qcom,pm8998-gpio", "qcom,spmi-gpio";
+ reg = <0xc000>;
+ gpio-controller;
+ gpio-ranges = <&pm8998_gpios 0 0 26>;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ };
+
+ pm8998_lsid1: pmic@1 {
+ compatible = "qcom,pm8998", "qcom,spmi-pmic";
+ reg = <0x1 SPMI_USID>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+};
diff --git a/arch/arm/dts/pmi8998.dtsi b/arch/arm/dts/pmi8998.dtsi
new file mode 100644
index 000000000000..cd3f0790fd42
--- /dev/null
+++ b/arch/arm/dts/pmi8998.dtsi
@@ -0,0 +1,98 @@
+// SPDX-License-Identifier: GPL-2.0
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/spmi/spmi.h>
+
+&spmi_bus {
+ pmi8998_lsid0: pmic@2 {
+ compatible = "qcom,pmi8998", "qcom,spmi-pmic";
+ reg = <0x2 SPMI_USID>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ pmi8998_charger: charger@1000 {
+ compatible = "qcom,pmi8998-charger";
+ reg = <0x1000>;
+
+ interrupts = <0x2 0x13 0x4 IRQ_TYPE_EDGE_BOTH>,
+ <0x2 0x12 0x2 IRQ_TYPE_EDGE_BOTH>,
+ <0x2 0x16 0x1 IRQ_TYPE_EDGE_RISING>,
+ <0x2 0x13 0x6 IRQ_TYPE_EDGE_RISING>;
+ interrupt-names = "usb-plugin",
+ "bat-ov",
+ "wdog-bark",
+ "usbin-icl-change";
+
+ io-channels = <&pmi8998_rradc 3>,
+ <&pmi8998_rradc 4>;
+ io-channel-names = "usbin_i", "usbin_v";
+
+ status = "disabled";
+ };
+
+ pmi8998_gpios: gpio@c000 {
+ compatible = "qcom,pmi8998-gpio", "qcom,spmi-gpio";
+ reg = <0xc000>;
+ gpio-controller;
+ gpio-ranges = <&pmi8998_gpios 0 0 14>;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ pmi8998_rradc: adc@4500 {
+ compatible = "qcom,pmi8998-rradc";
+ reg = <0x4500>;
+ #io-channel-cells = <1>;
+ };
+ };
+
+ pmi8998_lsid1: pmic@3 {
+ compatible = "qcom,pmi8998", "qcom,spmi-pmic";
+ reg = <0x3 SPMI_USID>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ labibb {
+ compatible = "qcom,pmi8998-lab-ibb";
+
+ ibb: ibb {
+ interrupts = <0x3 0xdc 0x2
IRQ_TYPE_EDGE_RISING>,
+ <0x3 0xdc 0x0 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "sc-err", "ocp";
+ };
+
+ lab: lab {
+ interrupts = <0x3 0xde 0x1
IRQ_TYPE_EDGE_RISING>,
+ <0x3 0xde 0x0 IRQ_TYPE_LEVEL_LOW>;
+ interrupt-names = "sc-err", "ocp";
+ };
+ };
+
+ pmi8998_lpg: pwm {
+ compatible = "qcom,pmi8998-lpg";
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+ #pwm-cells = <2>;
+
+ status = "disabled";
+ };
+
+ pmi8998_flash: led-controller@d300 {
+ compatible = "qcom,pmi8998-flash-led",
"qcom,spmi-flash-led";
+ reg = <0xd300>;
+ status = "disabled";
+ };
+
+ pmi8998_wled: leds@d800 {
+ compatible = "qcom,pmi8998-wled";
+ reg = <0xd800>, <0xd900>;
+ interrupts = <0x3 0xd8 0x1 IRQ_TYPE_EDGE_RISING>,
+ <0x3 0xd8 0x2 IRQ_TYPE_EDGE_RISING>;
+ interrupt-names = "ovp", "short";
+ label = "backlight";
+
+ status = "disabled";
+ };
+ };
+};
diff --git a/arch/arm/dts/sdm845-wcd9340.dtsi b/arch/arm/dts/sdm845-wcd9340.dtsi
new file mode 100644
index 000000000000..c15d48860646
--- /dev/null
+++ b/arch/arm/dts/sdm845-wcd9340.dtsi
@@ -0,0 +1,86 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * SDM845 SoC device tree source
+ *
+ * Copyright (c) 2018, The Linux Foundation. All rights reserved.
+ */
+
+&slim {
+ status = "okay";
+
+ slim@1 {
+ reg = <1>;
+ #address-cells = <2>;
+ #size-cells = <0>;
+
+ wcd9340_ifd: ifd@0,0 {
+ compatible = "slim217,250";
+ reg = <0 0>;
+ };
+
+ wcd9340: codec@1,0 {
+ compatible = "slim217,250";
+ reg = <1 0>;
+ slim-ifc-dev = <&wcd9340_ifd>;
+
+ #sound-dai-cells = <1>;
+
+ interrupts-extended = <&tlmm 54 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-controller;
+ #interrupt-cells = <1>;
+
+ clock-names = "extclk";
+ clocks = <&rpmhcc RPMH_LN_BB_CLK2>;
+
+ #clock-cells = <0>;
+ clock-frequency = <9600000>;
+ clock-output-names = "mclk";
+
+ pinctrl-0 = <&wcd_intr_default>;
+ pinctrl-names = "default";
+
+ qcom,micbias1-microvolt = <1800000>;
+ qcom,micbias2-microvolt = <1800000>;
+ qcom,micbias3-microvolt = <1800000>;
+ qcom,micbias4-microvolt = <1800000>;
+
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ wcdgpio: gpio-controller@42 {
+ compatible = "qcom,wcd9340-gpio";
+ gpio-controller;
+ #gpio-cells = <2>;
+ reg = <0x42 0x2>;
+ };
+
+ swm: swm@c85 {
+ compatible = "qcom,soundwire-v1.3.0";
+ reg = <0xc85 0x40>;
+ interrupts-extended = <&wcd9340 20>;
+
+ qcom,dout-ports = <6>;
+ qcom,din-ports = <2>;
+ qcom,ports-sinterval-low = /bits/ 8 <0x07 0x1f
0x3f 0x7 0x1f 0x3f 0x0f 0x0f>;
+ qcom,ports-offset1 = /bits/ 8 <0x01 0x02 0x0c
0x6 0x12 0x0d 0x07 0x0a>;
+ qcom,ports-offset2 = /bits/ 8 <0x00 0x00 0x1f
0x00 0x00 0x1f 0x00 0x00>;
+
+ #sound-dai-cells = <1>;
+ clocks = <&wcd9340>;
+ clock-names = "iface";
+ #address-cells = <2>;
+ #size-cells = <0>;
+ };
+ };
+ };
+};
+
+&tlmm {
+ wcd_intr_default: wcd-intr-default-state {
+ pins = "gpio54";
+ function = "gpio";
+
+ bias-pull-down;
+ drive-strength = <2>;
+ };
+};
--
2.43.0
