Add the required binman images to replace the Makefile rules which are
currently used. This includes subsuming:
- tpl/u-boot-tpl-rockchip.bin if TPL is enabled
- idbloader.img if either or both of SPL and TPL are enabled
- u-boot.itb if SPL_FIT is enabled
- u-boot-rockchip.bin if SPL is used, either using u-boot.itb when
SPL_FIT is enabled or u-boot.img when it isn't
Note that the intermediate files are dropped with binman, since it
producing everything in one pass. This means that
tpl/u-boot-tpl-rockchip.bin is not created, for example.
Note that for some 32-bit rk3288 boards, rockchip-optee.dtsi is included.
Signed-off-by: Simon Glass <s...@chromium.org>
---
Changes in v8:
- Make OP-TEE image optional
- Specify an entry address for U-Boot
Changes in v5:
- Rename blob to fit for puma and also SPI image
Changes in v3:
- Add an offset to the FIT description
Changes in v2:
- Rename op-tee to tee-os
- Drop use of .itb2
arch/arm/dts/rk3399-puma-haikou-u-boot.dtsi | 4 +-
arch/arm/dts/rockchip-u-boot.dtsi | 78 +++++++++++++++++++--
2 files changed, 74 insertions(+), 8 deletions(-)
diff --git a/arch/arm/dts/rk3399-puma-haikou-u-boot.dtsi
b/arch/arm/dts/rk3399-puma-haikou-u-boot.dtsi
index d2349ae90e2..088861dbf6d 100644
--- a/arch/arm/dts/rk3399-puma-haikou-u-boot.dtsi
+++ b/arch/arm/dts/rk3399-puma-haikou-u-boot.dtsi
@@ -46,14 +46,14 @@
&binman {
simple-bin {
- blob {
+ fit {
offset = <((CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR -
64) * 512)>;
};
};
#ifdef CONFIG_ROCKCHIP_SPI_IMAGE
simple-bin-spi {
- blob {
+ fit {
/* same as u-boot,spl-payload-offset */
offset = <0x80000>;
};
diff --git a/arch/arm/dts/rockchip-u-boot.dtsi
b/arch/arm/dts/rockchip-u-boot.dtsi
index fa094b00392..234fc5df433 100644
--- a/arch/arm/dts/rockchip-u-boot.dtsi
+++ b/arch/arm/dts/rockchip-u-boot.dtsi
@@ -30,14 +30,79 @@
};
};
-#ifdef CONFIG_ARM64
- blob {
+#if defined(CONFIG_SPL_FIT) && defined(CONFIG_ARM64)
+ fit: fit {
+ description = "FIT image for U-Boot with bl31 (TF-A)";
+ #address-cells = <1>;
+ fit,fdt-list = "of-list";
filename = "u-boot.itb";
+ fit,external-offset = <CONFIG_FIT_EXTERNAL_OFFSET>;
+ offset = <CONFIG_SPL_PAD_TO>;
+ images {
+ u-boot {
+ description = "U-Boot (64-bit)";
+ type = "standalone";
+ os = "U-Boot";
+ arch = "arm64";
+ compression = "none";
+ load = <CONFIG_TEXT_BASE>;
+ entry = <CONFIG_TEXT_BASE>;
+ u-boot-nodtb {
+ };
+ };
+
+ @atf-SEQ {
+ fit,operation = "split-elf";
+ description = "ARM Trusted Firmware";
+ type = "firmware";
+ arch = "arm64";
+ os = "arm-trusted-firmware";
+ compression = "none";
+ fit,load;
+ fit,entry;
+ fit,data;
+
+ atf-bl31 {
+ };
+ };
+ @tee-SEQ {
+ fit,operation = "split-elf";
+ description = "TEE";
+ type = "tee";
+ arch = "arm64";
+ os = "tee";
+ compression = "none";
+ fit,load;
+ fit,entry;
+ fit,data;
+
+ tee-os {
+ optional;
+ };
+ };
+
+ @fdt-SEQ {
+ description = "fdt-NAME";
+ compression = "none";
+ type = "flat_dt";
+ };
+ };
+
+ configurations {
+ default = "@config-DEFAULT-SEQ";
+ @config-SEQ {
+ description = "NAME.dtb";
+ fdt = "fdt-SEQ";
+ firmware = "u-boot";
+ fit,loadables;
+ };
+ };
+ };
#else
u-boot-img {
-#endif
offset = <CONFIG_SPL_PAD_TO>;
};
+#endif
};
#ifdef CONFIG_ROCKCHIP_SPI_IMAGE
@@ -59,7 +124,8 @@
};
#ifdef CONFIG_ARM64
- blob {
+ fit {
+ type = "blob";
filename = "u-boot.itb";
#else
u-boot-img {
@@ -68,6 +134,6 @@
offset = <CONFIG_SYS_SPI_U_BOOT_OFFS>;
};
};
-#endif
+#endif /* CONFIG_ROCKCHIP_SPI_IMAGE */
};
-#endif
+#endif /* CONFIG_SPL */
--
2.39.0.314.g84b9a713c41-goog
