Changes in relation to FriendlyARM's U-Boot nanopi2-v2016.01:
- DM_VIDEO support (display_dev.h).
- boot0.h added, handles NSIH --> tools/nexell obsolete.
- gpio.h: Include-path to errno.h changed.
Signed-off-by: Stefan Bosch <stefa...@posteo.net>
---
arch/arm/mach-nexell/include/mach/boot0.h | 40 +++
arch/arm/mach-nexell/include/mach/clk.h | 24 ++
arch/arm/mach-nexell/include/mach/display.h | 273 +++++++++++++++
arch/arm/mach-nexell/include/mach/display_dev.h | 37 ++
arch/arm/mach-nexell/include/mach/ehci.h | 106 ++++++
arch/arm/mach-nexell/include/mach/gpio.h | 17 +
arch/arm/mach-nexell/include/mach/mipi_display.h | 219 ++++++++++++
arch/arm/mach-nexell/include/mach/nexell.h | 352 +++++++++++++++++++
arch/arm/mach-nexell/include/mach/nx_gpio.h | 103 ++++++
arch/arm/mach-nexell/include/mach/reset.h | 19 +
arch/arm/mach-nexell/include/mach/sec_reg.h | 15 +
arch/arm/mach-nexell/include/mach/tieoff.h | 423 +++++++++++++++++++++++
12 files changed, 1628 insertions(+)
create mode 100644 arch/arm/mach-nexell/include/mach/boot0.h
create mode 100644 arch/arm/mach-nexell/include/mach/clk.h
create mode 100644 arch/arm/mach-nexell/include/mach/display.h
create mode 100644 arch/arm/mach-nexell/include/mach/display_dev.h
create mode 100644 arch/arm/mach-nexell/include/mach/ehci.h
create mode 100644 arch/arm/mach-nexell/include/mach/gpio.h
create mode 100644 arch/arm/mach-nexell/include/mach/mipi_display.h
create mode 100644 arch/arm/mach-nexell/include/mach/nexell.h
create mode 100644 arch/arm/mach-nexell/include/mach/nx_gpio.h
create mode 100644 arch/arm/mach-nexell/include/mach/reset.h
create mode 100644 arch/arm/mach-nexell/include/mach/sec_reg.h
create mode 100644 arch/arm/mach-nexell/include/mach/tieoff.h
diff --git a/arch/arm/mach-nexell/include/mach/boot0.h
b/arch/arm/mach-nexell/include/mach/boot0.h
new file mode 100644
index 0000000..e05c07e
--- /dev/null
+++ b/arch/arm/mach-nexell/include/mach/boot0.h
@@ -0,0 +1,40 @@
+/* SPDX-License-Identifier: GPL-2.0+
+ *
+ * NSIH (Nexell System Information Header) for FriendlyArm nanopi2 board
+ *
+ * The NSIH (first 512 Bytes of u-boot.bin) is necessary for the
+ * 2nd-Bootloader to get information like load address of U-Boot.
+ *
+ * 0x400 must be added to CONFIG_SYS_TEXT_BASE to have the actual load and
+ * start address because 2nd-Bootloader loads with an offset of 0x400
+ * (NSIH + 0x200 bytes are not loaded into RAM).
+ *
+ * It has been tested / is working with the following 2nd-Bootloader:
+ * "BL1 by Nexell V1.0.0-gd551e13 [Built on 2018-01-25 16:58:29]"
+ *
+ * (C) Copyright 2020 Stefan Bosch <stefa...@posteo.net>
+ */
+
+#ifndef __BOOT0_H
+#define __BOOT0_H
+
+ ARM_VECTORS
+ .space 0x30
+ .word (_end - _start) + 20 * 1024 /* 0x50: load size
+ * (bin + 20k for DTB) */
+ .space 0x4
+ .word CONFIG_SYS_TEXT_BASE + 0x400 /* 0x58: load address */
+ .word 0x00000000
+ .word CONFIG_SYS_TEXT_BASE + 0x400 /* 0x60: start address */
+ .space 0x198
+ .byte 'N' /* 0x1FC: "NSIH" signature */
+ .byte 'S'
+ .byte 'I'
+ .byte 'H'
+
+ /* The NSIH + 0x200 bytes are omitted by the 2nd-Bootloader */
+ .space 0x200
+_start:
+ ARM_VECTORS
+
+#endif /* __BOOT0_H */
diff --git a/arch/arm/mach-nexell/include/mach/clk.h
b/arch/arm/mach-nexell/include/mach/clk.h
new file mode 100644
index 0000000..cc5589a
--- /dev/null
+++ b/arch/arm/mach-nexell/include/mach/clk.h
@@ -0,0 +1,24 @@
+/* SPDX-License-Identifier: GPL-2.0+
+ *
+ * (C) Copyright 2016 Nexell
+ * Hyunseok, Jung <hsj...@nexell.co.kr>
+ */
+
+#ifndef __ASM_ARM_ARCH_CLK_H_
+#define __ASM_ARM_ARCH_CLK_H_
+
+struct clk {
+ unsigned long rate;
+};
+
+void clk_init(void);
+
+struct clk *clk_get(const char *id);
+void clk_put(struct clk *clk);
+unsigned long clk_get_rate(struct clk *clk);
+long clk_round_rate(struct clk *clk, unsigned long rate);
+int clk_set_rate(struct clk *clk, unsigned long rate);
+int clk_enable(struct clk *clk);
+void clk_disable(struct clk *clk);
+
+#endif
diff --git a/arch/arm/mach-nexell/include/mach/display.h
b/arch/arm/mach-nexell/include/mach/display.h
new file mode 100644
index 0000000..b167e63
--- /dev/null
+++ b/arch/arm/mach-nexell/include/mach/display.h
@@ -0,0 +1,273 @@
+/* SPDX-License-Identifier: GPL-2.0+
+ *
+ * Copyright (C) 2016 Nexell Co., Ltd.
+ *
+ * Author: junghyun, kim <jh...@nexell.co.kr>
+ */
+
+#ifndef _NX__DISPLAY_H_
+#define _NX__DISPLAY_H_
+
+#define DP_PLANS_NUM 3
+
+/* the display output format. */
+#define DPC_FORMAT_RGB555 0 /* RGB555 Format */
+#define DPC_FORMAT_RGB565 1 /* RGB565 Format */
+#define DPC_FORMAT_RGB666 2 /* RGB666 Format */
+#define DPC_FORMAT_RGB888 3 /* RGB888 Format */
+#define DPC_FORMAT_MRGB555A 4 /* MRGB555A Format */
+#define DPC_FORMAT_MRGB555B 5 /* MRGB555B Format */
+#define DPC_FORMAT_MRGB565 6 /* MRGB565 Format */
+#define DPC_FORMAT_MRGB666 7 /* MRGB666 Format */
+#define DPC_FORMAT_MRGB888A 8 /* MRGB888A Format */
+#define DPC_FORMAT_MRGB888B 9 /* MRGB888B Format */
+#define DPC_FORMAT_CCIR656 10 /* ITU-R BT.656 / 601(8-bit)
*/
+#define DPC_FORMAT_CCIR601A 12 /* ITU-R BT.601A */
+#define DPC_FORMAT_CCIR601B 13 /* ITU-R BT.601B */
+#define DPC_FORMAT_4096COLOR 1 /* 4096 Color Format */
+#define DPC_FORMAT_16GRAY 3 /* 16 Level Gray Format */
+
+/* layer pixel format. */
+#define MLC_RGBFMT_R5G6B5 0x44320000 /* {R5,G6,B5 }.
*/
+#define MLC_RGBFMT_B5G6R5 0xC4320000 /* {B5,G6,R5 }. */
+#define MLC_RGBFMT_X1R5G5B5 0x43420000 /* {X1,R5,G5,B5}. */
+#define MLC_RGBFMT_X1B5G5R5 0xC3420000 /* {X1,B5,G5,R5}. */
+#define MLC_RGBFMT_X4R4G4B4 0x42110000 /* {X4,R4,G4,B4}. */
+#define MLC_RGBFMT_X4B4G4R4 0xC2110000 /*
{X4,B4,G4,R4}. */
+#define MLC_RGBFMT_X8R3G3B2 0x41200000 /*
{X8,R3,G3,B2}. */
+#define MLC_RGBFMT_X8B3G3R2 0xC1200000 /*
{X8,B3,G3,R2}. */
+#define MLC_RGBFMT_A1R5G5B5 0x33420000 /*
{A1,R5,G5,B5}. */
+#define MLC_RGBFMT_A1B5G5R5 0xB3420000 /*
{A1,B5,G5,R5}. */
+#define MLC_RGBFMT_A4R4G4B4 0x22110000 /*
{A4,R4,G4,B4}. */
+#define MLC_RGBFMT_A4B4G4R4 0xA2110000 /*
{A4,B4,G4,R4}. */
+#define MLC_RGBFMT_A8R3G3B2 0x11200000 /*
{A8,R3,G3,B2}. */
+#define MLC_RGBFMT_A8B3G3R2 0x91200000 /*
{A8,B3,G3,R2}. */
+#define MLC_RGBFMT_R8G8B8 0x46530000 /* {R8,G8,B8 }.
*/
+#define MLC_RGBFMT_B8G8R8 0xC6530000 /* {B8,G8,R8 }.
*/
+#define MLC_RGBFMT_X8R8G8B8 0x46530000 /*
{X8,R8,G8,B8}. */
+#define MLC_RGBFMT_X8B8G8R8 0xC6530000 /*
{X8,B8,G8,R8}. */
+#define MLC_RGBFMT_A8R8G8B8 0x06530000 /*
{A8,R8,G8,B8}. */
+#define MLC_RGBFMT_A8B8G8R8 0x86530000 /*
{A8,B8,G8,R8}. */
+
+/* the data output order in case of ITU-R BT.656 / 601. */
+#define DPC_YCORDER_CBYCRY 0
+#define DPC_YCORDER_CRYCBY 1
+#define DPC_YCORDER_YCBYCR 2
+#define DPC_YCORDER_YCRYCB 3
+
+/* the PAD output clock. */
+#define DPC_PADCLKSEL_VCLK 0 /* VCLK */
+#define DPC_PADCLKSEL_VCLK2 1 /* VCLK2 */
+
+/* display sync info for DPC */
+struct dp_sync_info {
+ int interlace;
+ int h_active_len;
+ int h_sync_width;
+ int h_back_porch;
+ int h_front_porch;
+ int h_sync_invert; /* default active low */
+ int v_active_len;
+ int v_sync_width;
+ int v_back_porch;
+ int v_front_porch;
+ int v_sync_invert; /* default active low */
+ int pixel_clock_hz; /* HZ */
+};
+
+/* syncgen control (DPC) */
+#define DP_SYNC_DELAY_RGB_PVD (1 << 0)
+#define DP_SYNC_DELAY_HSYNC_CP1 (1 << 1)
+#define DP_SYNC_DELAY_VSYNC_FRAM (1 << 2)
+#define DP_SYNC_DELAY_DE_CP (1 << 3)
+
+struct dp_ctrl_info {
+ /* clock gen */
+ int clk_src_lv0;
+ int clk_div_lv0;
+ int clk_src_lv1;
+ int clk_div_lv1;
+ /* scan format */
+ int interlace;
+ /* syncgen format */
+ unsigned int out_format;
+ int invert_field; /* 0:normal(Low odd), 1:invert (low even) */
+ int swap_RB;
+ unsigned int yc_order; /* for CCIR output */
+ /* extern sync delay */
+ int delay_mask; /* if 0, set defalut delays */
+ int d_rgb_pvd; /* delay for RGB/PVD, 0~16, default 0 */
+ int d_hsync_cp1; /* delay for HSYNC/CP1, 0~63, default 12 */
+ int d_vsync_fram; /* delay for VSYNC/FRAM, 0~63, default 12 */
+ int d_de_cp2; /* delay for DE/CP2, 0~63, default 12 */
+ /* sync offset */
+ int vs_start_offset; /* start vsync offset, defatult 0 */
+ int vs_end_offset; /* end vsync offset, default 0 */
+ int ev_start_offset; /* start even vsync offset, default 0 */
+ int ev_end_offset; /* end even vsync offset , default 0 */
+ /* pad clock seletor */
+ int vck_select; /* 0=vclk0, 1=vclk2 */
+ int clk_inv_lv0; /* OUTCLKINVn */
+ int clk_delay_lv0; /* OUTCLKDELAYn */
+ int clk_inv_lv1; /* OUTCLKINVn */
+ int clk_delay_lv1; /* OUTCLKDELAYn */
+ int clk_sel_div1; /* 0=clk1_inv, 1=clk1_div_2_ns */
+};
+
+/* multi layer control (MLC) */
+struct dp_plane_top {
+ int screen_width;
+ int screen_height;
+ int video_prior; /* 0: video>RGBn, 1: RGB0>video>RGB1,
+ * 2: RGB0 > RGB1 > video .. */
+ int interlace;
+ int plane_num;
+ unsigned int back_color;
+};
+
+struct dp_plane_info {
+ int layer;
+ unsigned int fb_base;
+ int left;
+ int top;
+ int width;
+ int height;
+ int pixel_byte;
+ unsigned int format;
+ int alpha_on;
+ int alpha_depth;
+ int tp_on; /* transparency color enable */
+ unsigned int tp_color;
+ unsigned int mem_lock_size; /* memory burst access (4,8,16) */
+ int video_layer;
+ int enable;
+};
+
+/*
+ * LCD device dependency struct
+ * RGB, LVDS, MiPi, HDMI
+ */
+enum {
+ DP_DEVICE_RESCONV = 0,
+ DP_DEVICE_RGBLCD = 1,
+ DP_DEVICE_HDMI = 2,
+ DP_DEVICE_MIPI = 3,
+ DP_DEVICE_LVDS = 4,
+ DP_DEVICE_CVBS = 5,
+ DP_DEVICE_DP0 = 6,
+ DP_DEVICE_DP1 = 7,
+ DP_DEVICE_END,
+};
+
+enum {
+ DP_CLOCK_RESCONV = 0,
+ DP_CLOCK_LCDIF = 1,
+ DP_CLOCK_MIPI = 2,
+ DP_CLOCK_LVDS = 3,
+ DP_CLOCK_HDMI = 4,
+ DP_CLOCK_END,
+};
+
+enum dp_lvds_format {
+ DP_LVDS_FORMAT_VESA = 0,
+ DP_LVDS_FORMAT_JEIDA = 1,
+ DP_LVDS_FORMAT_LOC = 2,
+};
+
+#define DEF_VOLTAGE_LEVEL (0x20)
+
+struct dp_lvds_dev {
+ enum dp_lvds_format lvds_format; /* 0:VESA, 1:JEIDA, 2: Location */
+ int pol_inv_hs; /* hsync polarity invert for VESA, JEIDA */
+ int pol_inv_vs; /* bsync polarity invert for VESA, JEIDA */
+ int pol_inv_de; /* de polarity invert for VESA, JEIDA */
+ int pol_inv_ck; /* input clock(pixel clock) polarity invert */
+ int voltage_level;
+ /* Location setting */
+ unsigned int loc_map[9]; /* Location Setting */
+ unsigned int loc_mask[2]; /* Location Setting, 0 ~ 34 */
+ unsigned int loc_pol[2]; /* Location Setting, 0 ~ 34 */
+};
+
+#include "mipi_display.h"
+
+struct dp_mipi_dev {
+ int lp_bitrate; /* to lcd setup, low power bitrate (150, 100, 80 Mhz) */
+ int hs_bitrate; /* to lcd data, high speed bitrate (1000, ... Mhz) */
+ int lpm_trans;
+ int command_mode;
+ unsigned int hs_pllpms;
+ unsigned int hs_bandctl;
+ unsigned int lp_pllpms;
+ unsigned int lp_bandctl;
+ struct mipi_dsi_device dsi;
+};
+
+struct dp_rgb_dev {
+ int lcd_mpu_type;
+};
+
+struct dp_hdmi_dev {
+ int preset;
+};
+
+/* platform data for the driver model */
+struct nx_display_platdata {
+ int module;
+ struct dp_sync_info sync;
+ struct dp_ctrl_info ctrl;
+ struct dp_plane_top top;
+ struct dp_plane_info plane[DP_PLANS_NUM];
+ int dev_type;
+ void *device;
+};
+
+/* Lcd api */
+void nx_lvds_display(int module,
+ struct dp_sync_info *sync, struct dp_ctrl_info *ctrl,
+ struct dp_plane_top *top,
+ struct dp_plane_info *planes,
+ struct dp_lvds_dev *dev);
+
+void nx_rgb_display(int module,
+ struct dp_sync_info *sync, struct dp_ctrl_info *ctrl,
+ struct dp_plane_top *top, struct dp_plane_info *planes,
+ struct dp_rgb_dev *dev);
+
+void nx_hdmi_display(int module,
+ struct dp_sync_info *sync, struct dp_ctrl_info *ctrl,
+ struct dp_plane_top *top,
+ struct dp_plane_info *planes,
+ struct dp_hdmi_dev *dev);
+
+void nx_mipi_display(int module,
+ struct dp_sync_info *sync, struct dp_ctrl_info *ctrl,
+ struct dp_plane_top *top,
+ struct dp_plane_info *planes,
+ struct dp_mipi_dev *dev);
+
+int nx_mipi_dsi_lcd_bind(struct mipi_dsi_device *dsi);
+
+/* disaply api */
+void dp_control_init(int module);
+int dp_control_setup(int module, struct dp_sync_info *sync,
+ struct dp_ctrl_info *ctrl);
+void dp_control_enable(int module, int on);
+
+void dp_plane_init(int module);
+int dp_plane_screen_setup(int module, struct dp_plane_top *top);
+void dp_plane_screen_enable(int module, int on);
+
+int dp_plane_layer_setup(int module, struct dp_plane_info *plane);
+void dp_plane_layer_enable(int module, struct dp_plane_info *plane, int on);
+
+int dp_plane_set_enable(int module, int layer, int on);
+int dp_plane_set_address(int module, int layer, unsigned int address);
+int dp_plane_wait_vsync(int module, int layer, int fps);
+
+#if defined CONFIG_SPL_BUILD || \
+ (!defined(CONFIG_DM) && !defined(CONFIG_OF_CONTROL))
+int nx_display_probe(struct nx_display_platdata *plat);
+#endif
+
+#endif
diff --git a/arch/arm/mach-nexell/include/mach/display_dev.h
b/arch/arm/mach-nexell/include/mach/display_dev.h
new file mode 100644
index 0000000..77eb614
--- /dev/null
+++ b/arch/arm/mach-nexell/include/mach/display_dev.h
@@ -0,0 +1,37 @@
+/* SPDX-License-Identifier: GPL-2.0+
+ *
+ * Copyright (C) 2016 Nexell Co., Ltd.
+ *
+ * Author: junghyun, kim <jh...@nexell.co.kr>
+ */
+
+#ifndef _NX__DISPLAY_DEV_H_
+#define _NX__DISPLAY_DEV_H_
+
+#if defined CONFIG_VIDEO || defined CONFIG_DM_VIDEO
+#include <video_fb.h>
+#elif defined CONFIG_LCD
+#include <lcd.h>
+#endif
+
+struct nx_display_dev {
+#if defined CONFIG_VIDEO || defined CONFIG_DM_VIDEO
+ GraphicDevice graphic_device;
+#elif defined CONFIG_LCD
+ vidinfo_t *panel_info;
+#endif
+ unsigned long base;
+ int module;
+ struct dp_sync_info sync;
+ struct dp_ctrl_info ctrl;
+ struct dp_plane_top top;
+ struct dp_plane_info planes[DP_PLANS_NUM];
+ int dev_type;
+ void *device;
+ struct dp_plane_info *fb_plane;
+ unsigned int depth; /* byte per pixel */
+ unsigned int fb_addr;
+ unsigned int fb_size;
+};
+
+#endif
diff --git a/arch/arm/mach-nexell/include/mach/ehci.h
b/arch/arm/mach-nexell/include/mach/ehci.h
new file mode 100644
index 0000000..545153b
--- /dev/null
+++ b/arch/arm/mach-nexell/include/mach/ehci.h
@@ -0,0 +1,106 @@
+/* SPDX-License-Identifier: GPL-2.0+
+ *
+ * NEXELL USB HOST EHCI Controller
+ *
+ * (C) Copyright 2016 Nexell
+ * Hyunseok, Jung <hsj...@nexell.co.kr>
+ */
+
+#ifndef __ASM_ARM_ARCH_EHCI_H__
+#define __ASM_ARM_ARCH_EHCI_H__
+
+/* Nexell USBHOST PHY registers */
+
+/* USBHOST Configuration 0 Register */
+#define NX_HOST_CON0 0x14
+#define NX_HOST_CON0_SS_WORD_IF BIT(26)
+#define NX_HOST_CON0_SS_WORD_IF_ENB BIT(25)
+#define NX_HOST_CON0_SS_WORD_IF_16 ( \
+ NX_HOST_CON0_SS_WORD_IF | \
+ NX_HOST_CON0_SS_WORD_IF_ENB)
+
+#define NX_HOST_CON0_HSIC_480M_FROM_OTG_PHY BIT(24)
+#define NX_HOST_CON0_HSIC_FREE_CLOCK_ENB BIT(23)
+#define NX_HOST_CON0_HSIC_CLK_MASK (0x3 << 23)
+
+#define NX_HOST_CON0_N_HOST_HSIC_RESET_SYNC BIT(22)
+#define NX_HOST_CON0_N_HOST_UTMI_RESET_SYNC BIT(21)
+#define NX_HOST_CON0_N_HOST_PHY_RESET_SYNC BIT(20)
+#define NX_HOST_CON0_UTMI_RESET_SYNC ( \
+ NX_HOST_CON0_N_HOST_HSIC_RESET_SYNC | \
+ NX_HOST_CON0_N_HOST_UTMI_RESET_SYNC | \
+ NX_HOST_CON0_N_HOST_PHY_RESET_SYNC)
+
+#define NX_HOST_CON0_N_AUXWELL_RESET_SYNC BIT(19)
+#define NX_HOST_CON0_N_OHCI_RESET_SYNC BIT(18)
+#define NX_HOST_CON0_N_RESET_SYNC BIT(17)
+#define NX_HOST_CON0_AHB_RESET_SYNC ( \
+ NX_HOST_CON0_N_AUXWELL_RESET_SYNC | \
+ NX_HOST_CON0_N_OHCI_RESET_SYNC | \
+ NX_HOST_CON0_N_RESET_SYNC)
+
+#define NX_HOST_CON0_HSIC_EN_PORT1 (0x2 << 14)
+#define NX_HOST_CON0_HSIC_EN_MASK (0x7 << 14)
+
+/* USBHOST Configuration 1 Register */
+#define NX_HOST_CON1 0x18
+
+/* USBHOST Configuration 2 Register */
+#define NX_HOST_CON2 0x1C
+#define NX_HOST_CON2_SS_ENA_INCRX_ALIGN (0x1 << 28)
+#define NX_HOST_CON2_SS_ENA_INCR4 (0x1 << 27)
+#define NX_HOST_CON2_SS_ENA_INCR8 (0x1 << 26)
+#define NX_HOST_CON2_SS_ENA_INCR16 (0x1 << 25)
+#define NX_HOST_CON2_SS_DMA_BURST_MASK \
+ (NX_HOST_CON2_SS_ENA_INCR16 | NX_HOST_CON2_SS_ENA_INCR8 | \
+ NX_HOST_CON2_SS_ENA_INCR4 | NX_HOST_CON2_SS_ENA_INCRX_ALIGN)
+
+#define NX_HOST_CON2_EHCI_SS_ENABLE_DMA_BURST \
+ (NX_HOST_CON2_SS_ENA_INCR16 | NX_HOST_CON2_SS_ENA_INCR8 | \
+ NX_HOST_CON2_SS_ENA_INCR4 | NX_HOST_CON2_SS_ENA_INCRX_ALIGN)
+
+#define NX_HOST_CON2_OHCI_SS_ENABLE_DMA_BURST \
+ (NX_HOST_CON2_SS_ENA_INCR4 | NX_HOST_CON2_SS_ENA_INCRX_ALIGN)
+
+#define NX_HOST_CON2_SS_FLADJ_VAL_0_OFFSET (21)
+#define NX_HOST_CON2_SS_FLADJ_VAL_OFFSET (3)
+#define NX_HOST_CON2_SS_FLADJ_VAL_NUM (6)
+#define NX_HOST_CON2_SS_FLADJ_VAL_0_SEL BIT(5)
+#define NX_HOST_CON2_SS_FLADJ_VAL_MAX 0x7
+
+/* USBHOST Configuration 3 Register */
+#define NX_HOST_CON3 0x20
+#define NX_HOST_CON3_POR BIT(8)
+#define NX_HOST_CON3_POR_ENB BIT(7)
+#define NX_HOST_CON3_POR_MASK (0x3 << 7)
+
+/* USBHOST Configuration 4 Register */
+#define NX_HOST_CON4 0x24
+#define NX_HOST_CON4_WORDINTERFACE BIT(9)
+#define NX_HOST_CON4_WORDINTERFACE_ENB BIT(8)
+#define NX_HOST_CON4_WORDINTERFACE_16 ( \
+ NX_HOST_CON4_WORDINTERFACE | \
+ NX_HOST_CON4_WORDINTERFACE_ENB)
+
+/* USBHOST Configuration 5 Register */
+#define NX_HOST_CON5 0x28
+#define NX_HOST_CON5_HSIC_POR BIT(19)
+#define NX_HOST_CON5_HSIC_POR_ENB BIT(18)
+#define NX_HOST_CON5_HSIC_POR_MASK (0x3 << 18)
+
+/* USBHOST Configuration 6 Register */
+#define NX_HOST_CON6 0x2C
+#define NX_HOST_CON6_HSIC_WORDINTERFACE BIT(13)
+#define NX_HOST_CON6_HSIC_WORDINTERFACE_ENB BIT(12)
+#define NX_HOST_CON6_HSIC_WORDINTERFACE_16 ( \
+ NX_HOST_CON6_HSIC_WORDINTERFACE | \
+ NX_HOST_CON6_HSIC_WORDINTERFACE_ENB)
+
+/* Register map for PHY control */
+struct nx_usb_phy {
+ unsigned int reserved;
+ unsigned int others[4];
+ unsigned int usbhost_con[7];
+};
+
+#endif /* __ASM_ARM_ARCH_EHCI_H__ */
diff --git a/arch/arm/mach-nexell/include/mach/gpio.h
b/arch/arm/mach-nexell/include/mach/gpio.h
new file mode 100644
index 0000000..7167d3c
--- /dev/null
+++ b/arch/arm/mach-nexell/include/mach/gpio.h
@@ -0,0 +1,17 @@
+/* SPDX-License-Identifier: GPL-2.0+
+ *
+ * (C) Copyright 2016 Nexell
+ * DeokJin, Lee <truevir...@nexell.co.kr>
+ */
+
+#ifndef __ASM_ARCH_NEXELL_GPIO_H
+#define __ASM_ARCH_NEXELL_GPIO_H
+
+#include <asm/io.h>
+#include <linux/errno.h>
+
+#define PIN_BASE 0
+
+#define MAX_GPIO_BANKS 5
+
+#endif /* __ASM_ARCH_NEXELL_GPIO_H */
diff --git a/arch/arm/mach-nexell/include/mach/mipi_display.h
b/arch/arm/mach-nexell/include/mach/mipi_display.h
new file mode 100644
index 0000000..f10f4ae
--- /dev/null
+++ b/arch/arm/mach-nexell/include/mach/mipi_display.h
@@ -0,0 +1,219 @@
+/* SPDX-License-Identifier: GPL-2.0+
+ *
+ * Defines for Mobile Industry Processor Interface (MIPI(R))
+ * Display Working Group standards: DSI, DCS, DBI, DPI
+ *
+ * Copyright (C) 2010 Guennadi Liakhovetski <g.liakhovet...@gmx.de>
+ * Copyright (C) 2006 Nokia Corporation
+ * Author: Imre Deak <imre.d...@nokia.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef MIPI_DISPLAY_H
+#define MIPI_DISPLAY_H
+
+/* MIPI DSI Processor-to-Peripheral transaction types */
+enum {
+ MIPI_DSI_V_SYNC_START = 0x01,
+ MIPI_DSI_V_SYNC_END = 0x11,
+ MIPI_DSI_H_SYNC_START = 0x21,
+ MIPI_DSI_H_SYNC_END = 0x31,
+
+ MIPI_DSI_COLOR_MODE_OFF = 0x02,
+ MIPI_DSI_COLOR_MODE_ON = 0x12,
+ MIPI_DSI_SHUTDOWN_PERIPHERAL = 0x22,
+ MIPI_DSI_TURN_ON_PERIPHERAL = 0x32,
+
+ MIPI_DSI_GENERIC_SHORT_WRITE_0_PARAM = 0x03,
+ MIPI_DSI_GENERIC_SHORT_WRITE_1_PARAM = 0x13,
+ MIPI_DSI_GENERIC_SHORT_WRITE_2_PARAM = 0x23,
+
+ MIPI_DSI_GENERIC_READ_REQUEST_0_PARAM = 0x04,
+ MIPI_DSI_GENERIC_READ_REQUEST_1_PARAM = 0x14,
+ MIPI_DSI_GENERIC_READ_REQUEST_2_PARAM = 0x24,
+
+ MIPI_DSI_DCS_SHORT_WRITE = 0x05,
+ MIPI_DSI_DCS_SHORT_WRITE_PARAM = 0x15,
+
+ MIPI_DSI_DCS_READ = 0x06,
+
+ MIPI_DSI_SET_MAXIMUM_RETURN_PACKET_SIZE = 0x37,
+
+ MIPI_DSI_END_OF_TRANSMISSION = 0x08,
+
+ MIPI_DSI_NULL_PACKET = 0x09,
+ MIPI_DSI_BLANKING_PACKET = 0x19,
+ MIPI_DSI_GENERIC_LONG_WRITE = 0x29,
+ MIPI_DSI_DCS_LONG_WRITE = 0x39,
+
+ MIPI_DSI_LOOSELY_PACKED_PIXEL_STREAM_YCBCR20 = 0x0c,
+ MIPI_DSI_PACKED_PIXEL_STREAM_YCBCR24 = 0x1c,
+ MIPI_DSI_PACKED_PIXEL_STREAM_YCBCR16 = 0x2c,
+
+ MIPI_DSI_PACKED_PIXEL_STREAM_30 = 0x0d,
+ MIPI_DSI_PACKED_PIXEL_STREAM_36 = 0x1d,
+ MIPI_DSI_PACKED_PIXEL_STREAM_YCBCR12 = 0x3d,
+
+ MIPI_DSI_PACKED_PIXEL_STREAM_16 = 0x0e,
+ MIPI_DSI_PACKED_PIXEL_STREAM_18 = 0x1e,
+ MIPI_DSI_PIXEL_STREAM_3BYTE_18 = 0x2e,
+ MIPI_DSI_PACKED_PIXEL_STREAM_24 = 0x3e,
+};
+
+/* MIPI DSI Peripheral-to-Processor transaction types */
+enum {
+ MIPI_DSI_RX_ACKNOWLEDGE_AND_ERROR_REPORT = 0x02,
+ MIPI_DSI_RX_END_OF_TRANSMISSION = 0x08,
+ MIPI_DSI_RX_GENERIC_SHORT_READ_RESPONSE_1BYTE = 0x11,
+ MIPI_DSI_RX_GENERIC_SHORT_READ_RESPONSE_2BYTE = 0x12,
+ MIPI_DSI_RX_GENERIC_LONG_READ_RESPONSE = 0x1a,
+ MIPI_DSI_RX_DCS_LONG_READ_RESPONSE = 0x1c,
+ MIPI_DSI_RX_DCS_SHORT_READ_RESPONSE_1BYTE = 0x21,
+ MIPI_DSI_RX_DCS_SHORT_READ_RESPONSE_2BYTE = 0x22,
+};
+
+/* MIPI DCS commands */
+enum {
+ MIPI_DCS_NOP = 0x00,
+ MIPI_DCS_SOFT_RESET = 0x01,
+ MIPI_DCS_GET_DISPLAY_ID = 0x04,
+ MIPI_DCS_GET_RED_CHANNEL = 0x06,
+ MIPI_DCS_GET_GREEN_CHANNEL = 0x07,
+ MIPI_DCS_GET_BLUE_CHANNEL = 0x08,
+ MIPI_DCS_GET_DISPLAY_STATUS = 0x09,
+ MIPI_DCS_GET_POWER_MODE = 0x0A,
+ MIPI_DCS_GET_ADDRESS_MODE = 0x0B,
+ MIPI_DCS_GET_PIXEL_FORMAT = 0x0C,
+ MIPI_DCS_GET_DISPLAY_MODE = 0x0D,
+ MIPI_DCS_GET_SIGNAL_MODE = 0x0E,
+ MIPI_DCS_GET_DIAGNOSTIC_RESULT = 0x0F,
+ MIPI_DCS_ENTER_SLEEP_MODE = 0x10,
+ MIPI_DCS_EXIT_SLEEP_MODE = 0x11,
+ MIPI_DCS_ENTER_PARTIAL_MODE = 0x12,
+ MIPI_DCS_ENTER_NORMAL_MODE = 0x13,
+ MIPI_DCS_EXIT_INVERT_MODE = 0x20,
+ MIPI_DCS_ENTER_INVERT_MODE = 0x21,
+ MIPI_DCS_SET_GAMMA_CURVE = 0x26,
+ MIPI_DCS_SET_DISPLAY_OFF = 0x28,
+ MIPI_DCS_SET_DISPLAY_ON = 0x29,
+ MIPI_DCS_SET_COLUMN_ADDRESS = 0x2A,
+ MIPI_DCS_SET_PAGE_ADDRESS = 0x2B,
+ MIPI_DCS_WRITE_MEMORY_START = 0x2C,
+ MIPI_DCS_WRITE_LUT = 0x2D,
+ MIPI_DCS_READ_MEMORY_START = 0x2E,
+ MIPI_DCS_SET_PARTIAL_AREA = 0x30,
+ MIPI_DCS_SET_SCROLL_AREA = 0x33,
+ MIPI_DCS_SET_TEAR_OFF = 0x34,
+ MIPI_DCS_SET_TEAR_ON = 0x35,
+ MIPI_DCS_SET_ADDRESS_MODE = 0x36,
+ MIPI_DCS_SET_SCROLL_START = 0x37,
+ MIPI_DCS_EXIT_IDLE_MODE = 0x38,
+ MIPI_DCS_ENTER_IDLE_MODE = 0x39,
+ MIPI_DCS_SET_PIXEL_FORMAT = 0x3A,
+ MIPI_DCS_WRITE_MEMORY_CONTINUE = 0x3C,
+ MIPI_DCS_READ_MEMORY_CONTINUE = 0x3E,
+ MIPI_DCS_SET_TEAR_SCANLINE = 0x44,
+ MIPI_DCS_GET_SCANLINE = 0x45,
+ MIPI_DCS_READ_DDB_START = 0xA1,
+ MIPI_DCS_READ_DDB_CONTINUE = 0xA8,
+};
+
+/* MIPI DCS pixel formats */
+#define MIPI_DCS_PIXEL_FMT_24BIT 7
+#define MIPI_DCS_PIXEL_FMT_18BIT 6
+#define MIPI_DCS_PIXEL_FMT_16BIT 5
+#define MIPI_DCS_PIXEL_FMT_12BIT 3
+#define MIPI_DCS_PIXEL_FMT_8BIT 2
+#define MIPI_DCS_PIXEL_FMT_3BIT 1
+
+/* request ACK from peripheral */
+#define MIPI_DSI_MSG_REQ_ACK BIT(0)
+/* use Low Power Mode to transmit message */
+#define MIPI_DSI_MSG_USE_LPM BIT(1)
+
+/**
+ * struct mipi_dsi_msg - read/write DSI buffer
+ * @channel: virtual channel id
+ * @type: payload data type
+ * @flags: flags controlling this message transmission
+ * @tx_len: length of @tx_buf
+ * @tx_buf: data to be written
+ * @rx_len: length of @rx_buf
+ * @rx_buf: data to be read, or NULL
+ */
+struct mipi_dsi_msg {
+ u8 channel; /* virtual channel id */
+ u8 type; /* payload data type */
+ u16 flags; /* flags controlling this message transmission */
+ size_t tx_len;
+ const void *tx_buf;
+ size_t rx_len;
+ void *rx_buf;
+};
+
+/* DSI mode flags */
+
+/* video mode */
+#define MIPI_DSI_MODE_VIDEO BIT(0)
+/* video burst mode */
+#define MIPI_DSI_MODE_VIDEO_BURST BIT(1)
+/* video pulse mode */
+#define MIPI_DSI_MODE_VIDEO_SYNC_PULSE BIT(2)
+/* enable auto vertical count mode */
+#define MIPI_DSI_MODE_VIDEO_AUTO_VERT BIT(3)
+/* enable hsync-end packets in vsync-pulse and v-porch area */
+#define MIPI_DSI_MODE_VIDEO_HSE BIT(4)
+/* disable hfront-porch area */
+#define MIPI_DSI_MODE_VIDEO_HFP BIT(5)
+/* disable hback-porch area */
+#define MIPI_DSI_MODE_VIDEO_HBP BIT(6)
+/* disable hsync-active area */
+#define MIPI_DSI_MODE_VIDEO_HSA BIT(7)
+/* flush display FIFO on vsync pulse */
+#define MIPI_DSI_MODE_VSYNC_FLUSH BIT(8)
+/* disable EoT packets in HS mode */
+#define MIPI_DSI_MODE_EOT_PACKET BIT(9)
+/* device supports non-continuous clock behavior (DSI spec 5.6.1) */
+#define MIPI_DSI_CLOCK_NON_CONTINUOUS BIT(10)
+/* transmit data in low power */
+#define MIPI_DSI_MODE_LPM BIT(11) /* DSI mode flags */
+
+enum mipi_dsi_pixel_format {
+ MIPI_DSI_FMT_RGB888,
+ MIPI_DSI_FMT_RGB666,
+ MIPI_DSI_FMT_RGB666_PACKED,
+ MIPI_DSI_FMT_RGB565,
+};
+
+/**
+ * struct mipi_dsi_device - DSI peripheral device
+ * @host: DSI host for this peripheral
+ * @dev: driver model device node for this peripheral
+ * @channel: virtual channel assigned to the peripheral
+ * @format: pixel format for video mode
+ * @lanes: number of active data lanes
+ * @mode_flags: DSI operation mode related flags
+ */
+struct mipi_dsi_device {
+ unsigned int channel;
+ unsigned int lanes;
+ enum mipi_dsi_pixel_format format;
+ unsigned long mode_flags;
+ struct mipi_panel_ops *ops;
+ ssize_t (*write_buffer)(struct mipi_dsi_device *dsi,
+ const void *data, size_t len);
+};
+
+struct mipi_panel_ops {
+ int (*init)(struct mipi_dsi_device *dsi, int width, int height);
+ int (*prepare)(struct mipi_dsi_device *dsi);
+ int (*unprepare)(struct mipi_dsi_device *dsi);
+ int (*enable)(struct mipi_dsi_device *dsi);
+ int (*disable)(struct mipi_dsi_device *dsi);
+ void *private_data;
+};
+
+#endif
diff --git a/arch/arm/mach-nexell/include/mach/nexell.h
b/arch/arm/mach-nexell/include/mach/nexell.h
new file mode 100644
index 0000000..e42805f
--- /dev/null
+++ b/arch/arm/mach-nexell/include/mach/nexell.h
@@ -0,0 +1,352 @@
+/* SPDX-License-Identifier: GPL-2.0+
+ *
+ * (C) Copyright 2016 Nexell
+ * Hyunseok, Jung <hsj...@nexell.co.kr>
+ */
+
+#ifndef __NEXELL_H__
+#define __NEXELL_H__
+
+#define PHY_BASEADDR_DMA0 (0xC0000000)
+#define PHY_BASEADDR_DMA1 (0xC0001000)
+#if defined(CONFIG_ARCH_S5P4418)
+#define PHY_BASEADDR_INTC0 (0xC0002000)
+#define PHY_BASEADDR_INTC1 (0xC0003000)
+#elif defined(CONFIG_ARCH_S5P6818)
+#define PHY_BASEADDR_INTC (0xC0008000)
+#endif
+#define PHY_BASEADDR_CLKPWR (0xC0010000)
+#define PHY_BASEADDR_RTC (0xC0010C00)
+#define PHY_BASEADDR_ALIVE (0xC0010800)
+#define PHY_BASEADDR_RSTCON (0xC0012000)
+#define PHY_BASEADDR_TIEOFF (0xC0011000)
+#define PHY_BASEADDR_PDM (0xC0014000)
+#define PHY_BASEADDR_CRYPTO (0xC0015000)
+#define PHY_BASEADDR_TIMER (0xC0017000)
+#define PHY_BASEADDR_PWM (0xC0018000)
+#define PHY_BASEADDR_WDT (0xC0019000)
+#define PHY_BASEADDR_GPIOA (0xC001A000)
+#define PHY_BASEADDR_GPIOB (0xC001B000)
+#define PHY_BASEADDR_GPIOC (0xC001C000)
+#define PHY_BASEADDR_GPIOD (0xC001D000)
+#define PHY_BASEADDR_GPIOE (0xC001E000)
+#define PHY_BASEADDR_OHCI (0xC0020000)
+#define PHY_BASEADDR_EHCI (0xC0030000)
+#define PHY_BASEADDR_HSOTG (0xC0040000)
+#define PHY_BASEADDR_ADC (0xC0053000)
+#define PHY_BASEADDR_PPM (0xC0054000)
+#define PHY_BASEADDR_I2S0 (0xC0055000)
+#define PHY_BASEADDR_I2S1 (0xC0056000)
+#define PHY_BASEADDR_I2S2 (0xC0057000)
+#define PHY_BASEADDR_AC97 (0xC0058000)
+#define PHY_BASEADDR_SPDIF_TX (0xC0059000)
+#define PHY_BASEADDR_SPDIF_RX (0xC005A000)
+#define PHY_BASEADDR_SSP0 (0xC005B000)
+#define PHY_BASEADDR_SSP1 (0xC005C000)
+#define PHY_BASEADDR_SSP2 (0xC005F000)
+#define PHY_BASEADDR_MPEGTSI (0xC005D000)
+#define PHY_BASEADDR_GMAC (0xC0060000)
+#define PHY_BASEADDR_VIP0 (0xC0063000)
+#define PHY_BASEADDR_VIP1 (0xC0064000)
+#if defined(CONFIG_ARCH_S5P6818)
+#define PHY_BASEADDR_VIP2 (0xC0099000)
+#endif
+#define PHY_BASEADDR_DEINTERLACE (0xC0065000)
+#define PHY_BASEADDR_SCALER (0xC0066000)
+#define PHY_BASEADDR_ECID (0xC0067000)
+#define PHY_BASEADDR_SDMMC0 (0xC0062000)
+#define PHY_BASEADDR_SDMMC1 (0xC0068000)
+#define PHY_BASEADDR_SDMMC2 (0xC0069000)
+#define PHY_BASEADDR_MALI400 (0xC0070000)
+#define PHY_BASEADDR_CODA_APB0 (0xC0080000)
+#define PHY_BASEADDR_CODA_APB1 (0xC0081000)
+#define PHY_BASEADDR_CODA_APB2 (0xC0082000)
+#define PHY_BASEADDR_CODA_APB3 (0xC0083000)
+/* dma (O), modem(X), UART0_MODULE */
+#define PHY_BASEADDR_UART0 (0xC00A1000)
+/* dma (O), modem(O), pl01115_Uart_modem_MODULE */
+#define PHY_BASEADDR_UART1 (0xC00A0000)
+/* dma (O), modem(X), UART1_MODULE */
+#define PHY_BASEADDR_UART2 (0xC00A2000)
+/* dma (X), modem(X), pl01115_Uart_nodma0_MODULE */
+#define PHY_BASEADDR_UART3 (0xC00A3000)
+/* dma (X), modem(X), pl01115_Uart_nodma1_MODULE */
+#define PHY_BASEADDR_UART4 (0xC006D000)
+/* dma (X), modem(X), pl01115_Uart_nodma2_MODULE */
+#define PHY_BASEADDR_UART5 (0xC006F000)
+#define PHY_BASEADDR_I2C0 (0xC00A4000)
+#define PHY_BASEADDR_I2C1 (0xC00A5000)
+#define PHY_BASEADDR_I2C2 (0xC00A6000)
+#define PHY_BASEADDR_CAN0 (0xC00CE000)
+#define PHY_BASEADDR_CAN1 (0xC00CF000)
+#define PHY_BASEADDR_MIPI (0xC00D0000)
+#define PHY_BASEADDR_DISPLAYTOP (0xC0100000)
+
+#define PHY_BASEADDR_CLKGEN0 (0xC00BB000) /* TIMER_1 */
+#define PHY_BASEADDR_CLKGEN1 (0xC00BC000) /* TIMER_2 */
+#define PHY_BASEADDR_CLKGEN2 (0xC00BD000) /* TIMER_3 */
+#define PHY_BASEADDR_CLKGEN3 (0xC00BE000) /* PWM_1 */
+#define PHY_BASEADDR_CLKGEN4 (0xC00BF000) /* PWM_2 */
+#define PHY_BASEADDR_CLKGEN5 (0xC00C0000) /* PWM_3 */
+#define PHY_BASEADDR_CLKGEN6 (0xC00AE000) /* I2C_0 */
+#define PHY_BASEADDR_CLKGEN7 (0xC00AF000) /* I2C_1 */
+#define PHY_BASEADDR_CLKGEN8 (0xC00B0000) /* I2C_2 */
+#define PHY_BASEADDR_CLKGEN9 (0xC00CA000) /* MIPI */
+#define PHY_BASEADDR_CLKGEN10 (0xC00C8000) /* GMAC */
+#define PHY_BASEADDR_CLKGEN11 (0xC00B8000) /* SPDIF_TX */
+#define PHY_BASEADDR_CLKGEN12 (0xC00B7000) /* MPEGTSI */
+#define PHY_BASEADDR_CLKGEN13 (0xC00BA000) /* PWM_0 */
+#define PHY_BASEADDR_CLKGEN14 (0xC00B9000) /* TIMER_0 */
+#define PHY_BASEADDR_CLKGEN15 (0xC00B2000) /* I2S_0 */
+#define PHY_BASEADDR_CLKGEN16 (0xC00B3000) /* I2S_1 */
+#define PHY_BASEADDR_CLKGEN17 (0xC00B4000) /* I2S_2 */
+#define PHY_BASEADDR_CLKGEN18 (0xC00C5000) /* SDHC_0 */
+#define PHY_BASEADDR_CLKGEN19 (0xC00CC000) /* SDHC_1 */
+#define PHY_BASEADDR_CLKGEN20 (0xC00CD000) /* SDHC_2 */
+#define PHY_BASEADDR_CLKGEN21 (0xC00C3000) /* MALI */
+#define PHY_BASEADDR_CLKGEN22 (0xC00A9000) /* UART_0 */
+#define PHY_BASEADDR_CLKGEN23 (0xC00AA000) /* UART_2 */
+#define PHY_BASEADDR_CLKGEN24 (0xC00A8000) /* UART_1 */
+#define PHY_BASEADDR_CLKGEN25 (0xC00AB000) /* UART_3 */
+#define PHY_BASEADDR_CLKGEN26 (0xC006E000) /* UART_4 */
+#define PHY_BASEADDR_CLKGEN27 (0xC00B1000) /* UART_5 */
+#define PHY_BASEADDR_CLKGEN28 (0xC00B5000) /* DEINTERLACE */
+#define PHY_BASEADDR_CLKGEN29 (0xC00C4000) /* PPM */
+#define PHY_BASEADDR_CLKGEN30 (0xC00C1000) /* VIP_0 */
+#define PHY_BASEADDR_CLKGEN31 (0xC00C2000) /* VIP_1 */
+#define PHY_BASEADDR_CLKGEN32 (0xC006B000) /* USB2HOST */
+#define PHY_BASEADDR_CLKGEN33 (0xC00C7000) /* CODA */
+#define PHY_BASEADDR_CLKGEN34 (0xC00C6000) /* CRYPTO */
+#define PHY_BASEADDR_CLKGEN35 (0xC00B6000) /* SCALER */
+#define PHY_BASEADDR_CLKGEN36 (0xC00CB000) /* PDM */
+#define PHY_BASEADDR_CLKGEN37 (0xC00AC000) /* SPI0 */
+#define PHY_BASEADDR_CLKGEN38 (0xC00AD000) /* SPI1 */
+#define PHY_BASEADDR_CLKGEN39 (0xC00A7000) /* SPI2 */
+#if defined(CONFIG_ARCH_S5P6818)
+#define PHY_BASEADDR_CLKGEN40 (0xC009A000)
+#endif
+#define PHY_BASEADDR_DREX (0xC00E0000)
+
+#define PHY_BASEADDR_CS_NAND (0x2C000000)
+
+#define PHY_BASEADDR_SRAM (0xFFFF0000)
+
+/*
+ * Nexell clock generator
+ */
+#define CLK_ID_TIMER_1 0
+#define CLK_ID_TIMER_2 1
+#define CLK_ID_TIMER_3 2
+#define CLK_ID_PWM_1 3
+#define CLK_ID_PWM_2 4
+#define CLK_ID_PWM_3 5
+#define CLK_ID_I2C_0 6
+#define CLK_ID_I2C_1 7
+#define CLK_ID_I2C_2 8
+#define CLK_ID_MIPI 9
+#define CLK_ID_GMAC 10 /* External Clock 1 */
+#define CLK_ID_SPDIF_TX 11
+#define CLK_ID_MPEGTSI 12
+#define CLK_ID_PWM_0 13
+#define CLK_ID_TIMER_0 14
+#define CLK_ID_I2S_0 15 /* External Clock 1 */
+#define CLK_ID_I2S_1 16 /* External Clock 1 */
+#define CLK_ID_I2S_2 17 /* External Clock 1 */
+#define CLK_ID_SDHC_0 18
+#define CLK_ID_SDHC_1 19
+#define CLK_ID_SDHC_2 20
+#define CLK_ID_MALI 21
+#define CLK_ID_UART_0 22 /* UART0_MODULE */
+#define CLK_ID_UART_2 23 /* UART1_MODULE */
+#define CLK_ID_UART_1 24 /* pl01115_Uart_modem_MODULE */
+#define CLK_ID_UART_3 25 /* pl01115_Uart_nodma0_MODULE */
+#define CLK_ID_UART_4 26 /* pl01115_Uart_nodma1_MODULE */
+#define CLK_ID_UART_5 27 /* pl01115_Uart_nodma2_MODULE */
+#define CLK_ID_DIT 28
+#define CLK_ID_PPM 29
+#define CLK_ID_VIP_0 30 /* External Clock 1 */
+#define CLK_ID_VIP_1 31 /* External Clock 1, 2 */
+#define CLK_ID_USB2HOST 32 /* External Clock 2 */
+#define CLK_ID_CODA 33
+#define CLK_ID_CRYPTO 34
+#define CLK_ID_SCALER 35
+#define CLK_ID_PDM 36
+#define CLK_ID_SPI_0 37
+#define CLK_ID_SPI_1 38
+#define CLK_ID_SPI_2 39
+#define CLK_ID_MAX 39
+
+/*
+ * Nexell Reset control
+ */
+#define RESET_ID_AC97 0
+#define RESET_ID_CPU1 1
+#define RESET_ID_CPU2 2
+#define RESET_ID_CPU3 3
+#define RESET_ID_WD1 4
+#define RESET_ID_WD2 5
+#define RESET_ID_WD3 6
+#define RESET_ID_CRYPTO 7
+#define RESET_ID_DEINTERLACE 8
+#define RESET_ID_DISP_TOP 9
+#define RESET_ID_DISPLAY 10
+#define RESET_ID_RESCONV 11
+#define RESET_ID_LCDIF 12
+#define RESET_ID_HDMI 13
+#define RESET_ID_HDMI_VIDEO 14
+#define RESET_ID_HDMI_SPDIF 15
+#define RESET_ID_HDMI_TMDS 16
+#define RESET_ID_HDMI_PHY 17
+#define RESET_ID_LVDS 18
+#define RESET_ID_ECID 19
+#define RESET_ID_I2C0 20
+#define RESET_ID_I2C1 21
+#define RESET_ID_I2C2 22
+#define RESET_ID_I2S0 23
+#define RESET_ID_I2S1 24
+#define RESET_ID_I2S2 25
+#define RESET_ID_DREX_C 26
+#define RESET_ID_DREX_A 27
+#define RESET_ID_DREX 28
+#define RESET_ID_MIPI 29
+#define RESET_ID_MIPI_DSI 30
+#define RESET_ID_MIPI_CSI 31
+#define RESET_ID_MIPI_PHY_S 32
+#define RESET_ID_MIPI_PHY_M 33
+#define RESET_ID_MPEGTSI 34
+#define RESET_ID_PDM 35
+#define RESET_ID_TIMER 36
+#define RESET_ID_PWM 37
+#define RESET_ID_SCALER 38
+#define RESET_ID_SDMMC0 39
+#define RESET_ID_SDMMC1 40
+#define RESET_ID_SDMMC2 41
+#define RESET_ID_SPDIFRX 42
+#define RESET_ID_SPDIFTX 43
+#define RESET_ID_SSP0_P 44
+#define RESET_ID_SSP0 45
+#define RESET_ID_SSP1_P 46
+#define RESET_ID_SSP1 47
+#define RESET_ID_SSP2_P 48
+#define RESET_ID_SSP2 49
+#define RESET_ID_UART0 50 /* UART1 */
+#define RESET_ID_UART1 51 /* pl01115_Uart_modem */
+#define RESET_ID_UART2 52 /* UART1 */
+#define RESET_ID_UART3 53 /* pl01115_Uart_nodma0 */
+#define RESET_ID_UART4 54 /* pl01115_Uart_nodma1 */
+#define RESET_ID_UART5 55 /* pl01115_Uart_nodma2 */
+#define RESET_ID_USB20HOST 56
+#define RESET_ID_USB20OTG 57
+#define RESET_ID_WDT 58
+#define RESET_ID_WDT_POR 59
+#define RESET_ID_ADC 60
+#define RESET_ID_CODA_A 61
+#define RESET_ID_CODA_P 62
+#define RESET_ID_CODA_C 63
+#define RESET_ID_DWC_GMAC 64
+#define RESET_ID_MALI400 65
+#define RESET_ID_PPM 66
+#define RESET_ID_VIP1 67
+#define RESET_ID_VIP0 68
+#if defined(CONFIG_ARCH_S5P6818)
+#define RESET_ID_VIP2 69
+#endif
+
+/*
+ * device name
+ */
+#define DEV_NAME_UART "nx-uart" /* pl0115 (amba-pl011.c) */
+#define DEV_NAME_FB "nx-fb"
+#define DEV_NAME_DISP "nx-disp"
+#define DEV_NAME_LCD "nx-lcd"
+#define DEV_NAME_LVDS "nx-lvds"
+#define DEV_NAME_HDMI "nx-hdmi"
+#define DEV_NAME_RESCONV "nx-resconv"
+#define DEV_NAME_MIPI "nx-mipi"
+#define DEV_NAME_PCM "nx-pcm"
+#define DEV_NAME_I2S "nx-i2s"
+#define DEV_NAME_SPDIF_TX "nx-spdif-tx"
+#define DEV_NAME_SPDIF_RX "nx-spdif-rx"
+#define DEV_NAME_I2C "nx-i2c"
+#define DEV_NAME_NAND "nx-nand"
+#define DEV_NAME_KEYPAD "nx-keypad"
+#define DEV_NAME_SDHC "nx-sdhc"
+#define DEV_NAME_PWM "nx-pwm"
+#define DEV_NAME_TIMER "nx-timer"
+#define DEV_NAME_SOC_PWM "nx-soc-pwm"
+#define DEV_NAME_GPIO "nx-gpio"
+#define DEV_NAME_RTC "nx-rtc"
+#define DEV_NAME_GMAC "nx-gmac"
+#define DEV_NAME_MPEGTSI "nx-mpegtsi"
+#define DEV_NAME_MALI "nx-mali"
+#define DEV_NAME_DIT "nx-deinterlace"
+#define DEV_NAME_PPM "nx-ppm"
+#define DEV_NAME_VIP "nx-vip"
+#define DEV_NAME_CODA "nx-coda"
+#define DEV_NAME_USB2HOST "nx-usb2h"
+#define DEV_NAME_CRYPTO "nx-crypto"
+#define DEV_NAME_SCALER "nx-scaler"
+#define DEV_NAME_PDM "nx-pdm"
+#define DEV_NAME_SPI "nx-spi"
+#define DEV_NAME_CPUFREQ "nx-cpufreq"
+
+/*
+ * clock generator
+ */
+#define CORECLK_NAME_PLL0 "pll0" /* cpu clock */
+#define CORECLK_NAME_PLL1 "pll1"
+#define CORECLK_NAME_PLL2 "pll2"
+#define CORECLK_NAME_PLL3 "pll3"
+#define CORECLK_NAME_FCLK "fclk"
+#define CORECLK_NAME_MCLK "mclk"
+#define CORECLK_NAME_BCLK "bclk"
+#define CORECLK_NAME_PCLK "pclk"
+#define CORECLK_NAME_HCLK "hclk"
+
+#define CORECLK_ID_PLL0 0
+#define CORECLK_ID_PLL1 1
+#define CORECLK_ID_PLL2 2
+#define CORECLK_ID_PLL3 3
+#define CORECLK_ID_FCLK 4
+#define CORECLK_ID_MCLK 5
+#define CORECLK_ID_BCLK 6
+#define CORECLK_ID_PCLK 7
+#define CORECLK_ID_HCLK 8
+
+#define ALIVEPWRGATEREG (PHY_BASEADDR_ALIVE + 0x0)
+
+#if defined(CONFIG_ARCH_S5P4418)
+#define SCR_ARM_SECOND_BOOT (0xC0010C1C) /* PWR scratch
*/
+#define SCR_ARM_SECOND_BOOT_REG1 (0xc0010234) /* ToDo : Check
Address */
+#elif defined(CONFIG_ARCH_S5P6818)
+#define SCR_ARM_SECOND_BOOT (0xc0010230) /* PWR scratch
*/
+#define SCR_ARM_SECOND_BOOT_REG1 (0xc0010234) /* PWR scratch */
+#define SCR_ARM_SECOND_BOOT_REG2 (0xc0010238) /* PWR scratch */
+#endif
+
+#define SCR_ALIVE_BASE (PHY_BASEADDR_ALIVE)
+#define SCR_SIGNAGURE_RESET (SCR_ALIVE_BASE + 0x068)
+#define SCR_SIGNAGURE_SET (SCR_ALIVE_BASE + 0x06C)
+#define SCR_SIGNAGURE_READ (SCR_ALIVE_BASE + 0x070)
+
+#define SYSRSTCONFIG (0x23C)
+#define DEVICEBOOTINFO (0x50)
+#define BOOTMODE_MASK (0x7)
+#define BOOTMODE_SDMMC 5
+#define BOOTMODE_USB 6
+#define BOOTMODE_SDMMC_PORT_VAL(x) ((((x) >> 3) & 1) | \
+ (((x) >> 19 & 1) << 1))
+#define EMMC_PORT_NUM 2
+#define SD_PORT_NUM 0
+#define ID_REG_EC0 (0x54)
+#define WIRE0_MASK (0x1)
+
+#ifndef __ASSEMBLY__
+
+#define NS_IN_HZ (1000000000UL)
+#define TO_PERIOD_NS(freq) (NS_IN_HZ / (freq))
+#define TO_DUTY_NS(duty, freq) (duty ? TO_PERIOD_NS(freq) / (100 / duty) : 0)
+
+#endif /* __ASSEMBLY__ */
+
+#endif /* __NEXELL_H__ */
diff --git a/arch/arm/mach-nexell/include/mach/nx_gpio.h
b/arch/arm/mach-nexell/include/mach/nx_gpio.h
new file mode 100644
index 0000000..91803d2
--- /dev/null
+++ b/arch/arm/mach-nexell/include/mach/nx_gpio.h
@@ -0,0 +1,103 @@
+/* SPDX-License-Identifier: GPL-2.0+
+ *
+ * (C) Copyright 2016 Nexell
+ * Youngbok, Park <ybp...@nexell.co.kr>
+ */
+
+#include <linux/types.h>
+#include <asm/io.h>
+
+#ifndef __nx_gpio_h__
+#define __nx_gpio_h__
+
+struct nx_gpio_register_set {
+ u32 gpioxout;
+ u32 gpioxoutenb;
+ u32 gpioxdetmode[2];
+ u32 gpioxintenb;
+ u32 gpioxdet;
+ u32 gpioxpad;
+ u32 gpioxpuenb;
+ u32 gpioxaltfn[2];
+ u32 gpioxdetmodeex;
+ u32 __reserved[4];
+ u32 gpioxdetenb;
+ u32 gpiox_slew;
+ u32 gpiox_slew_disable_default;
+ u32 gpiox_drv1;
+ u32 gpiox_drv1_disable_default;
+ u32 gpiox_drv0;
+ u32 gpiox_drv0_disable_default;
+ u32 gpiox_pullsel;
+ u32 gpiox_pullsel_disable_default;
+ u32 gpiox_pullenb;
+ u32 gpiox_pullenb_disable_default;
+ u32 gpiox_input_mux_select0;
+ u32 gpiox_input_mux_select1;
+ u8 __reserved1[0x1000 - 0x70];
+};
+
+enum {
+ nx_gpio_padfunc_0 = 0ul,
+ nx_gpio_padfunc_1 = 1ul,
+ nx_gpio_padfunc_2 = 2ul,
+ nx_gpio_padfunc_3 = 3ul
+};
+
+enum {
+ nx_gpio_drvstrength_0 = 0ul,
+ nx_gpio_drvstrength_1 = 1ul,
+ nx_gpio_drvstrength_2 = 2ul,
+ nx_gpio_drvstrength_3 = 3ul
+};
+
+enum {
+ nx_gpio_pull_down = 0ul,
+ nx_gpio_pull_up = 1ul,
+ nx_gpio_pull_off = 2ul
+};
+
+int nx_gpio_initialize(void);
+u32 nx_gpio_get_number_of_module(void);
+u32 nx_gpio_get_size_of_register_set(void);
+void nx_gpio_set_base_address(u32 module_index, void *base_address);
+void *nx_gpio_get_base_address(u32 module_index);
+int nx_gpio_open_module(u32 module_index);
+int nx_gpio_close_module(u32 module_index);
+int nx_gpio_check_busy(u32 module_index);
+void nx_gpio_set_detect_enable(u32 module_index, u32 bit_number,
+ int detect_enb);
+void nx_gpio_set_pad_function(u32 module_index, u32 bit_number, u32 padfunc);
+void nx_gpio_set_pad_function32(u32 module_index, u32 msbvalue, u32 lsbvalue);
+int nx_gpio_get_pad_function(u32 module_index, u32 bit_number);
+void nx_gpio_set_output_enable(u32 module_index, u32 bit_number,
+ int output_enb);
+int nx_gpio_get_detect_enable(u32 module_index, u32 bit_number);
+u32 nx_gpio_get_detect_enable32(u32 module_index);
+void nx_gpio_set_detect_enable(u32 module_index, u32 bit_number,
+ int detect_enb);
+void nx_gpio_set_detect_enable32(u32 module_index, u32 enable_flag);
+int nx_gpio_get_output_enable(u32 module_index, u32 bit_number);
+void nx_gpio_set_output_enable32(u32 module_index, int output_enb);
+u32 nx_gpio_get_output_enable32(u32 module_index);
+void nx_gpio_set_output_value(u32 module_index, u32 bit_number, int value);
+int nx_gpio_get_output_value(u32 module_index, u32 bit_number);
+void nx_gpio_set_output_value32(u32 module_index, u32 value);
+u32 nx_gpio_get_output_value32(u32 module_index);
+int nx_gpio_get_input_value(u32 module_index, u32 bit_number);
+void nx_gpio_set_pull_select(u32 module_index, u32 bit_number, int enable);
+void nx_gpio_set_pull_select32(u32 module_index, u32 value);
+int nx_gpio_get_pull_select(u32 module_index, u32 bit_number);
+u32 nx_gpio_get_pull_select32(u32 module_index);
+void nx_gpio_set_pull_mode(u32 module_index, u32 bit_number, u32 mode);
+void nx_gpio_set_fast_slew(u32 module_index, u32 bit_number, int enable);
+void nx_gpio_set_drive_strength_disable_default(u32 module_index,
+ u32 bit_number, int enable);
+void nx_gpio_set_drive_strength_disable_default(u32 module_index,
+ u32 bit_number, int enable);
+void nx_gpio_set_drive_strength(u32 module_index, u32 bit_number,
+ u32 drvstrength);
+void nx_gpio_set_drive_strength_disable_default(u32 module_index,
+ u32 bit_number, int enable);
+u32 nx_gpio_get_drive_strength(u32 module_index, u32 bit_number);
+#endif
diff --git a/arch/arm/mach-nexell/include/mach/reset.h
b/arch/arm/mach-nexell/include/mach/reset.h
new file mode 100644
index 0000000..e1301d4
--- /dev/null
+++ b/arch/arm/mach-nexell/include/mach/reset.h
@@ -0,0 +1,19 @@
+/* SPDX-License-Identifier: GPL-2.0+
+ *
+ * (C) Copyright 2016 Nexell
+ * Youngbok, Park <ybp...@nexell.co.kr>
+ */
+
+#ifndef __NEXELL_RESET__
+#define __NEXELL_RESET__
+
+#define NUMBER_OF_RESET_MODULE_PIN 69
+
+enum rstcon {
+ RSTCON_ASSERT = 0UL,
+ RSTCON_NEGATE = 1UL
+};
+
+void nx_rstcon_setrst(u32 rstindex, enum rstcon status);
+
+#endif /* __NEXELL_RESET__ */
diff --git a/arch/arm/mach-nexell/include/mach/sec_reg.h
b/arch/arm/mach-nexell/include/mach/sec_reg.h
new file mode 100644
index 0000000..e3ae5ac
--- /dev/null
+++ b/arch/arm/mach-nexell/include/mach/sec_reg.h
@@ -0,0 +1,15 @@
+/* SPDX-License-Identifier: GPL-2.0+
+ *
+ * (C) Copyright 2016 Nexell
+ * Youngbok, Park <p...@nexell.co.kr>
+ */
+
+#define NEXELL_L2C_SEC_ID 0
+#define NEXELL_MALI_SEC_ID 2
+#define NEXELL_MIPI_SEC_ID 4
+#define NEXELL_TOFF_SEC_ID 6
+
+int write_sec_reg_by_id(void __iomem *reg, int val, int id);
+int read_sec_reg_by_id(void __iomem *reg, int id);
+int read_sec_reg(void __iomem *reg);
+int write_sec_reg(void __iomem *reg, int val);
diff --git a/arch/arm/mach-nexell/include/mach/tieoff.h
b/arch/arm/mach-nexell/include/mach/tieoff.h
new file mode 100644
index 0000000..70e9652
--- /dev/null
+++ b/arch/arm/mach-nexell/include/mach/tieoff.h
@@ -0,0 +1,423 @@
+/* SPDX-License-Identifier: GPL-2.0+
+ *
+ * (C) Copyright 2016 Nexell
+ * Youngbok, Park <p...@nexell.co.kr>
+ */
+
+#ifndef _NEXELL_TIEOFF_H
+#define _NEXELL_TIEOFF_H
+
+void nx_tieoff_set(u32 tieoff_index, u32 tieoff_value);
+u32 nx_tieoff_get(u32 tieoff_index);
+
+#if defined(CONFIG_ARCH_S5P4418)
+#define NX_TIEOFF_CORTEXA9MP_TOP_QUADL2C_CLAMPCOREOUT ((1 << 16) | 0)
+#define NX_TIEOFF_CORTEXA9MP_TOP_QUADL2C_CLAMPCPU0 ((1 << 16) | 1)
+#define NX_TIEOFF_CORTEXA9MP_TOP_QUADL2C_CLAMPCPU1 ((1 << 16) | 2)
+#define NX_TIEOFF_CORTEXA9MP_TOP_QUADL2C_CLAMPCPU2 ((1 << 16) | 3)
+#define NX_TIEOFF_CORTEXA9MP_TOP_QUADL2C_CLAMPCPU3 ((1 << 16) | 4)
+#define NX_TIEOFF_CORTEXA9MP_TOP_QUADL2C_COREPWRDOWN ((1 << 16) | 5)
+#define NX_TIEOFF_CORTEXA9MP_TOP_QUADL2C_CPU0PWRDOWN ((1 << 16) | 6)
+#define NX_TIEOFF_CORTEXA9MP_TOP_QUADL2C_CPU1PWRDOWN ((1 << 16) | 7)
+#define NX_TIEOFF_CORTEXA9MP_TOP_QUADL2C_CPU2PWRDOWN ((1 << 16) | 8)
+#define NX_TIEOFF_CORTEXA9MP_TOP_QUADL2C_CPU3PWRDOWN ((1 << 16) | 9)
+#define NX_TIEOFF_CORTEXA9MP_TOP_QUADL2C_L2_CFGENDIAN ((1 << 16) | 10)
+#define NX_TIEOFF_CORTEXA9MP_TOP_QUADL2C_L1EMAS ((1 << 16) | 11)
+#define NX_TIEOFF_CORTEXA9MP_TOP_QUADL2C_L2RET1N_0 ((1 << 16) | 12)
+#define NX_TIEOFF_CORTEXA9MP_TOP_QUADL2C_L2RET1N_1 ((1 << 16) | 13)
+#define NX_TIEOFF_CORTEXA9MP_TOP_QUADL2C_L2PGEN_0 ((1 << 16) | 14)
+#define NX_TIEOFF_CORTEXA9MP_TOP_QUADL2C_L2PGEN_1 ((1 << 16) | 15)
+#define NX_TIEOFF_CORTEXA9MP_TOP_QUADL2C_CLAMPL2_0 ((1 << 16) | 16)
+#define NX_TIEOFF_CORTEXA9MP_TOP_QUADL2C_CLAMPL2_1 ((1 << 16) | 17)
+#define NX_TIEOFF_CORTEXA9MP_TOP_QUADL2C_VINITHI ((4 << 16) | 18)
+#define NX_TIEOFF_CORTEXA9MP_TOP_QUADL2C_L2EMA ((3 << 16) | 22)
+#define NX_TIEOFF_CORTEXA9MP_TOP_QUADL2C_TEINIT ((4 << 16) | 25)
+#define NX_TIEOFF_CORTEXA9MP_TOP_QUADL2C_L1EMAW ((2 << 16) | 29)
+#define NX_TIEOFF_CORTEXA9MP_TOP_QUADL2C_L2EMAW ((2 << 16) | 32)
+#define NX_TIEOFF_CORTEXA9MP_TOP_QUADL2C_L1EMA ((3 << 16) | 34)
+#define NX_TIEOFF_CORTEXA9MP_TOP_QUADL2C_CPUCLKOFF ((4 << 16) | 37)
+#define NX_TIEOFF_CORTEXA9MP_TOP_QUADL2C_PWRCTLI0 ((2 << 16) | 41)
+#define NX_TIEOFF_CORTEXA9MP_TOP_QUADL2C_PWRCTLI1 ((2 << 16) | 43)
+#define NX_TIEOFF_CORTEXA9MP_TOP_QUADL2C_PWRCTLI2 ((2 << 16) | 45)
+#elif defined(CONFIG_ARCH_S5P6818)
+#define NX_TIEOFF_MMC_8BIT ((1 << 16) | 5)
+#endif
+#define NX_TIEOFF_AXISRAM0_i_TIE_ra2w_EMAA ((3 << 16) | 47)
+#define NX_TIEOFF_AXISRAM0_i_TIE_ra2w_EMAB ((3 << 16) | 50)
+#define NX_TIEOFF_AXISRAM0_i_TIE_ra2w_EMAWA ((2 << 16) | 53)
+#define NX_TIEOFF_AXISRAM0_i_TIE_ra2w_EMAWB ((2 << 16) | 55)
+#define NX_TIEOFF_AXISRAM0_i_nPowerDown ((1 << 16) | 57)
+#define NX_TIEOFF_AXISRAM0_i_nSleep ((1 << 16) | 58)
+#define NX_TIEOFF_CAN0_i_TIE_rf1_EMA ((3 << 16) | 59)
+#define NX_TIEOFF_CAN0_i_TIE_rf1_EMAW ((2 << 16) | 62)
+#define NX_TIEOFF_CAN0_i_nPowerDown ((1 << 16) | 64)
+#define NX_TIEOFF_CAN0_i_nSleep ((1 << 16) | 65)
+#define NX_TIEOFF_CAN1_i_TIE_rf1_EMA ((3 << 16) | 66)
+#define NX_TIEOFF_CAN1_i_TIE_rf1_EMAW ((2 << 16) | 69)
+#define NX_TIEOFF_CAN1_i_nPowerDown ((1 << 16) | 71)
+#define NX_TIEOFF_CAN1_i_nSleep ((1 << 16) | 72)
+#define NX_TIEOFF_DEINTERLACE0_i_NX_RF1_EMA ((3 << 16) | 73)
+#define NX_TIEOFF_DEINTERLACE0_i_NX_RF1_EMAW ((2 << 16) | 76)
+#define NX_TIEOFF_DEINTERLACE0_i_NX_RF2_EMAA ((3 << 16) | 78)
+#define NX_TIEOFF_DEINTERLACE0_i_NX_RF2_EMAB ((3 << 16) | 81)
+#define NX_TIEOFF_DEINTERLACE0_i_NX_RF2W_EMAA ((3 << 16) | 84)
+#define NX_TIEOFF_DEINTERLACE0_i_NX_RF2W_EMAB ((3 << 16) | 87)
+#define NX_TIEOFF_DISPLAYTOP0_i_ResConv_nPowerDown ((1 << 16) | 90)
+#define NX_TIEOFF_DISPLAYTOP0_i_ResConv_nSleep ((1 << 16) | 91)
+#define NX_TIEOFF_DISPLAYTOP0_i_HDMI_nPowerDown ((2 << 16) | 92)
+#define NX_TIEOFF_DISPLAYTOP0_i_HDMI_nSleep ((2 << 16) | 94)
+#define NX_TIEOFF_DISPLAYTOP0_i_HDMI_PHY_REFCLK_SEL ((1 << 16) | 96)
+#define NX_TIEOFF_DISPLAYTOP0_i_TIEOFF_SPSRAM_EMA ((3 << 16) | 97)
+#define NX_TIEOFF_DISPLAYTOP0_i_TIEOFF_SPSRAM_EMAW ((2 << 16) | 100)
+#define NX_TIEOFF_DISPLAYTOP0_i_TIEOFF_DPSRAM_1R1W_EMAA ((3 << 16) | 102)
+#define NX_TIEOFF_DISPLAYTOP0_i_TIEOFF_DPSRAM_1R1W_EMAB ((3 << 16) | 105)
+#define NX_TIEOFF_DISPLAYTOP0_i_TIEOFF_DPSRAM_EMAA ((3 << 16) | 108)
+#define NX_TIEOFF_DISPLAYTOP0_i_TIEOFF_DPSRAM_EMAB ((3 << 16) | 111)
+#define NX_TIEOFF_DISPLAYTOP0_i_TIEOFF_DPSRAM_EMAWA ((2 << 16) | 114)
+#define NX_TIEOFF_DISPLAYTOP0_i_TIEOFF_DPSRAM_EMAWB ((2 << 16) | 116)
+#define NX_TIEOFF_MCUSTOP0_i_vrom_EMA ((3 << 16) | 118)
+#define NX_TIEOFF_DREX0_CKE_INIT ((1 << 16) | 121)
+#define NX_TIEOFF_DREX0_CA_SWAP ((1 << 16) |
122)
+#define NX_TIEOFF_DREX0_CSYSREQ ((1 << 16) |
123)
+#define NX_TIEOFF_DREX0_PAUSE_REQ ((1 << 16) | 124)
+#define NX_TIEOFF_DREX0_PEREV_TRIGGER ((1 << 16) | 125)
+#define NX_TIEOFF_DREX0_CTRL_HCKE ((1 << 16) | 126)
+#define NX_TIEOFF_DREX0_DFI_RESET_N_P0 ((1 << 16) | 127)
+#define NX_TIEOFF_DREX0_DFI_RESET_N_P1 ((1 << 16) | 128)
+#define NX_TIEOFF_MIPI0_NX_DPSRAM_1R1W_EMAA ((3 << 16) | 129)
+#define NX_TIEOFF_MIPI0_NX_DPSRAM_1R1W_EMAB ((3 << 16) | 132)
+#define NX_TIEOFF_MIPI0_i_NX_NPOWERDOWN ((4 << 16) |
135)
+#define NX_TIEOFF_MIPI0_i_NX_NSLEEP ((4 << 16) | 139)
+#define NX_TIEOFF_SCALER0_i_NX_EMA ((3 << 16) | 143)
+#define NX_TIEOFF_SCALER0_i_NX_EMAW ((2 << 16) | 146)
+#define NX_TIEOFF_UART0_USESMC ((1 << 16) | 148)
+#define NX_TIEOFF_UART0_SMCTXENB ((1 << 16) | 149)
+#define NX_TIEOFF_UART0_SMCRXENB ((1 << 16) | 150)
+#define NX_TIEOFF_UART1_USESMC ((1 << 16) | 151)
+#define NX_TIEOFF_UART1_SMCTXENB ((1 << 16) | 152)
+#define NX_TIEOFF_UART1_SMCRXENB ((1 << 16) | 153)
+#define NX_TIEOFF_UART2_USESMC ((1 << 16) | 154)
+#define NX_TIEOFF_UART2_SMCTXENB ((1 << 16) | 155)
+#define NX_TIEOFF_UART2_SMCRXENB ((1 << 16) | 156)
+#define NX_TIEOFF_UART3_USESMC ((1 << 16) | 157)
+#define NX_TIEOFF_UART3_SMCTXENB ((1 << 16) | 158)
+#define NX_TIEOFF_UART3_SMCRXENB ((1 << 16) | 159)
+#define NX_TIEOFF_UART4_USESMC ((1 << 16) | 160)
+#define NX_TIEOFF_UART4_SMCTXENB ((1 << 16) | 161)
+#define NX_TIEOFF_UART4_SMCRXENB ((1 << 16) | 162)
+#define NX_TIEOFF_UART5_USESMC ((1 << 16) | 163)
+#define NX_TIEOFF_UART5_SMCTXENB ((1 << 16) | 164)
+#define NX_TIEOFF_UART5_SMCRXENB ((1 << 16) | 165)
+#define NX_TIEOFF_USB20HOST0_i_nPowerDown ((1 << 16) | 166)
+#define NX_TIEOFF_USB20HOST0_i_nSleep ((1 << 16) | 167)
+#define NX_TIEOFF_USB20HOST0_i_NX_RF1_EMA ((3 << 16) | 168)
+#define NX_TIEOFF_USB20HOST0_i_NX_RF1_EMAW ((2 << 16) | 171)
+#define NX_TIEOFF_USB20HOST0_sys_interrupt_i ((1 << 16) | 173)
+#define NX_TIEOFF_USB20HOST0_i_hsic_en ((3 << 16) | 174)
+#define NX_TIEOFF_USB20HOST0_i_nResetSync ((1 << 16) | 177)
+#define NX_TIEOFF_USB20HOST0_i_nResetSync_ohci ((1 << 16) | 178)
+#define NX_TIEOFF_USB20HOST0_i_nAuxWellResetSync ((1 << 16) | 179)
+#define NX_TIEOFF_USB20HOST0_i_nHostPhyResetSync ((1 << 16) | 180)
+#define NX_TIEOFF_USB20HOST0_i_nHostUtmiResetSync ((1 << 16) | 181)
+#define NX_TIEOFF_USB20HOST0_i_nHostHsicResetSync ((1 << 16) | 182)
+#define NX_TIEOFF_USB20HOST0_i_HSIC_FREE_CLOCK_ENB ((1 << 16) | 183)
+#define NX_TIEOFF_USB20HOST0_i_HSIC_480M_FROM_OTG_PHY ((1 << 16) | 184)
+#define NX_TIEOFF_USB20HOST0_ss_word_if_enb_i ((1 << 16) | 185)
+#define NX_TIEOFF_USB20HOST0_ss_word_if_i ((1 << 16) | 186)
+#define NX_TIEOFF_USB20HOST0_ss_utmi_backward_enb_i ((1 << 16) | 187)
+#define NX_TIEOFF_USB20HOST0_ss_resume_utmi_pls_dis_i ((1 << 16) | 188)
+#define NX_TIEOFF_USB20HOST0_phy_vstatus_0_i ((3 << 16) | 189)
+#define NX_TIEOFF_USB20HOST0_phy_vstatus_1_i ((3 << 16) | 192)
+#define NX_TIEOFF_USB20HOST0_phy_vstatus_2_i ((3 << 16) | 195)
+#define NX_TIEOFF_USB20HOST0_phy_vstatus_3_i ((3 << 16) | 198)
+#define NX_TIEOFF_USB20HOST0_phy_vstatus_4_i ((3 << 16) | 201)
+#define NX_TIEOFF_USB20HOST0_phy_vstatus_5_i ((3 << 16) | 204)
+#define NX_TIEOFF_USB20HOST0_phy_vstatus_6_i ((3 << 16) | 207)
+#define NX_TIEOFF_USB20HOST0_phy_vstatus_7_i ((3 << 16) | 210)
+#define NX_TIEOFF_USB20HOST0_ss_power_state_valid_i ((1 << 16) | 213)
+#define NX_TIEOFF_USB20HOST0_ss_nxt_power_state_valid_i ((1 << 16) | 214)
+#define NX_TIEOFF_USB20HOST0_ss_power_state_i ((2 << 16) | 215)
+#define NX_TIEOFF_USB20HOST0_ss_next_power_state_i ((2 << 16) | 217)
+#define NX_TIEOFF_USB20HOST0_app_prt_ovrcur_i ((3 << 16) | 219)
+#define NX_TIEOFF_USB20HOST0_ss_simulation_mode_i ((1 << 16) | 222)
+#define NX_TIEOFF_USB20HOST0_ss_fladj_val_host_i ((6 << 16) | 224)
+#define NX_TIEOFF_USB20HOST0_ss_fladj_val_5_i ((3 << 16) | 230)
+#define NX_TIEOFF_USB20HOST0_ss_fladj_val_4_i ((3 << 16) | 233)
+#define NX_TIEOFF_USB20HOST0_ss_fladj_val_3_i ((3 << 16) | 236)
+#define NX_TIEOFF_USB20HOST0_ss_fladj_val_2_i ((3 << 16) | 239)
+#define NX_TIEOFF_USB20HOST0_ss_fladj_val_1_i ((3 << 16) | 242)
+#define NX_TIEOFF_USB20HOST0_ss_fladj_val_0_i ((3 << 16) | 245)
+#define NX_TIEOFF_USB20HOST0_ss_autoppd_on_overcur_en_i ((1 << 16) | 248)
+#define NX_TIEOFF_USB20HOST0_ss_ena_incr16_i ((1 << 16) | 249)
+#define NX_TIEOFF_USB20HOST0_ss_ena_incr8_i ((1 << 16) | 250)
+#define NX_TIEOFF_USB20HOST0_ss_ena_incr4_i ((1 << 16) | 251)
+#define NX_TIEOFF_USB20HOST0_ss_ena_incrx_align_i ((1 << 16) | 252)
+#define NX_TIEOFF_USB20HOST0_i_ohci_0_cntsel_n ((1 << 16) | 253)
+#define NX_TIEOFF_USB20HOST0_ohci_0_app_irq1_i ((1 << 16) | 254)
+#define NX_TIEOFF_USB20HOST0_ohci_0_app_irq12_i ((1 << 16) |
255)
+#define NX_TIEOFF_USB20HOST0_ohci_0_app_io_hit_i ((1 << 16) | 256)
+#define NX_TIEOFF_USB20HOST0_ss_hubsetup_min_i ((1 << 16) | 257)
+#define NX_TIEOFF_USB20HOST0_app_start_clk_i ((1 << 16) | 258)
+#define NX_TIEOFF_USB20HOST0_ohci_susp_lgcy_i ((1 << 16) | 259)
+#define NX_TIEOFF_USB20HOST0_i_SIDDQ ((1 << 16) | 260)
+#define NX_TIEOFF_USB20HOST0_i_VATESTENB ((2 << 16) | 261)
+#define NX_TIEOFF_USB20HOST0_i_POR_ENB ((1 << 16) | 263)
+#define NX_TIEOFF_USB20HOST0_i_POR ((1 << 16) | 264)
+#define NX_TIEOFF_USB20HOST0_i_REFCLKSEL ((2 << 16) | 265)
+#define NX_TIEOFF_USB20HOST0_i_FSEL ((3 << 16) | 267)
+#define NX_TIEOFF_USB20HOST0_i_COMMONONN ((1 << 16) | 270)
+#define NX_TIEOFF_USB20HOST0_i_RESREQIN ((1 << 16) |
271)
+#define NX_TIEOFF_USB20HOST0_i_PORTRESET ((1 << 16) | 272)
+#define NX_TIEOFF_USB20HOST0_i_OTGDISABLE ((1 << 16) | 273)
+#define NX_TIEOFF_USB20HOST0_i_LOOPBACKENB ((1 << 16) | 274)
+#define NX_TIEOFF_USB20HOST0_i_IDPULLUPi ((1 << 16) | 275)
+#define NX_TIEOFF_USB20HOST0_i_DRVVBUS ((1 << 16) | 276)
+#define NX_TIEOFF_USB20HOST0_i_ADPCHRG ((1 << 16) | 277)
+#define NX_TIEOFF_USB20HOST0_i_ADPDISCHRG ((1 << 16) | 278)
+#define NX_TIEOFF_USB20HOST0_i_ADPPRBENB ((1 << 16) | 279)
+#define NX_TIEOFF_USB20HOST0_i_VBUSVLDEXT ((1 << 16) | 280)
+#define NX_TIEOFF_USB20HOST0_i_VBUSVLDEXTSEL ((1 << 16) | 281)
+#define NX_TIEOFF_USB20HOST0_i_DPPULLDOWN ((1 << 16) | 282)
+#define NX_TIEOFF_USB20HOST0_i_DMPULLDOWN ((1 << 16) | 283)
+#define NX_TIEOFF_USB20HOST0_i_SUSPENDM_ENB ((1 << 16) | 284)
+#define NX_TIEOFF_USB20HOST0_i_SUSPENDM ((1 << 16) |
285)
+#define NX_TIEOFF_USB20HOST0_i_SLEEPM_ENB ((1 << 16) | 286)
+#define NX_TIEOFF_USB20HOST0_i_SLEEPM ((1 << 16) | 287)
+#define NX_TIEOFF_USB20HOST0_i_OPMODE_ENB ((1 << 16) | 288)
+#define NX_TIEOFF_USB20HOST0_i_OPMODE ((2 << 16) | 289)
+#define NX_TIEOFF_USB20HOST0_i_TERMSEL_ENB ((1 << 16) | 291)
+#define NX_TIEOFF_USB20HOST0_i_TERMSEL ((1 << 16) | 292)
+#define NX_TIEOFF_USB20HOST0_i_XCVRSEL_ENB ((1 << 16) | 293)
+#define NX_TIEOFF_USB20HOST0_i_XCVRSEL ((2 << 16) | 294)
+#define NX_TIEOFF_USB20HOST0_i_WORDINTERFACE_ENB ((1 << 16) | 296)
+#define NX_TIEOFF_USB20HOST0_i_WORDINTERFACE ((1 << 16) | 297)
+#define NX_TIEOFF_USB20HOST0_i_TXBITSTUFFEN ((1 << 16) | 298)
+#define NX_TIEOFF_USB20HOST0_i_TXBITSTUFFENH ((1 << 16) | 299)
+#define NX_TIEOFF_USB20HOST0_i_BYPASSDPDATA ((1 << 16) | 300)
+#define NX_TIEOFF_USB20HOST0_i_BYPASSDMDATA ((1 << 16) | 301)
+#define NX_TIEOFF_USB20HOST0_i_BYPASSDPEN ((1 << 16) | 302)
+#define NX_TIEOFF_USB20HOST0_i_BYPASSDMEN ((1 << 16) | 303)
+#define NX_TIEOFF_USB20HOST0_i_BYPASSSEL ((1 << 16) | 304)
+#define NX_TIEOFF_USB20HOST0_i_COMPDISTUNE ((3 << 16) | 305)
+#define NX_TIEOFF_USB20HOST0_i_SQRXTUNE ((3 << 16) |
308)
+#define NX_TIEOFF_USB20HOST0_i_OTGTUNE ((3 << 16) | 311)
+#define NX_TIEOFF_USB20HOST0_i_TXHSXVTUNE ((2 << 16) | 314)
+#define NX_TIEOFF_USB20HOST0_i_TXFSLSTUNE ((4 << 16) | 316)
+#define NX_TIEOFF_USB20HOST0_i_TXVREFTUNE ((4 << 16) | 320)
+#define NX_TIEOFF_USB20HOST0_i_TXRISETUNE ((2 << 16) | 324)
+#define NX_TIEOFF_USB20HOST0_i_TXRESTUNE ((2 << 16) | 326)
+#define NX_TIEOFF_USB20HOST0_i_TXPREEMPAMPTUNE ((2 << 16) | 328)
+#define NX_TIEOFF_USB20HOST0_i_TXPREEMPPULSETUNE ((1 << 16) | 330)
+#define NX_TIEOFF_USB20HOST0_i_CHRGSEL ((1 << 16) | 331)
+#define NX_TIEOFF_USB20HOST0_i_VDATDETENB ((1 << 16) | 332)
+#define NX_TIEOFF_USB20HOST0_i_VDATSRCENB ((1 << 16) | 333)
+#define NX_TIEOFF_USB20HOST0_i_DCDENB ((1 << 16) | 334)
+#define NX_TIEOFF_USB20HOST0_i_ACAENB ((1 << 16) | 335)
+#define NX_TIEOFF_USB20HOST0_i_HSIC_MSTRXCVR ((1 << 16) | 336)
+#define NX_TIEOFF_USB20HOST0_i_HSIC_SIDDQ ((1 << 16) | 337)
+#define NX_TIEOFF_USB20HOST0_i_HSIC_POR_ENB ((1 << 16) | 338)
+#define NX_TIEOFF_USB20HOST0_i_HSIC_POR ((1 << 16) |
339)
+#define NX_TIEOFF_USB20HOST0_i_HSIC_REFCLKDIV ((7 << 16) | 340)
+#define NX_TIEOFF_USB20HOST0_i_HSIC_REFCLKSEL ((2 << 16) | 347)
+#define NX_TIEOFF_USB20HOST0_i_HSIC_COMMONONN ((1 << 16) | 349)
+#define NX_TIEOFF_USB20HOST0_i_HSIC_PORTRESET ((1 << 16) | 350)
+#define NX_TIEOFF_USB20HOST0_i_HSIC_LOOPBACKENB ((1 << 16) |
351)
+#define NX_TIEOFF_USB20HOST0_i_HSIC_DPPULLDOWN ((1 << 16) | 352)
+#define NX_TIEOFF_USB20HOST0_i_HSIC_DMPULLDOWN ((1 << 16) | 353)
+#define NX_TIEOFF_USB20HOST0_i_HSIC_SUSPENDM_ENB ((1 << 16) | 354)
+#define NX_TIEOFF_USB20HOST0_i_HSIC_SUSPENDM ((1 << 16) | 355)
+#define NX_TIEOFF_USB20HOST0_i_HSIC_SLEEPM_ENB ((1 << 16) | 356)
+#define NX_TIEOFF_USB20HOST0_i_HSIC_SLEEPM ((1 << 16) | 357)
+#define NX_TIEOFF_USB20HOST0_i_HSIC_MSTRXOPU ((1 << 16) | 358)
+#define NX_TIEOFF_USB20HOST0_i_HSIC_OPMODE_ENB ((1 << 16) | 359)
+#define NX_TIEOFF_USB20HOST0_i_HSIC_OPMODE ((2 << 16) | 360)
+#define NX_TIEOFF_USB20HOST0_i_HSIC_XCVRSELECT_ENB ((1 << 16) | 362)
+#define NX_TIEOFF_USB20HOST0_i_HSIC_XCVRSELECT ((1 << 16) | 363)
+#define NX_TIEOFF_USB20HOST0_i_HSIC_WORDINTERFACE_ENB ((1 << 16) | 364)
+#define NX_TIEOFF_USB20HOST0_i_HSIC_WORDINTERFACE ((1 << 16) | 365)
+#define NX_TIEOFF_USB20HOST0_i_HSIC_TXBITSTUFFEN ((1 << 16) | 366)
+#define NX_TIEOFF_USB20HOST0_i_HSIC_TXBITSTUFFENH ((1 << 16) | 367)
+#define NX_TIEOFF_USB20HOST0_i_HSIC_TXRPUTUNE ((2 << 16) | 368)
+#define NX_TIEOFF_USB20HOST0_i_HSIC_TXRPDTUNE ((2 << 16) | 370)
+#define NX_TIEOFF_USB20HOST0_i_HSIC_TXSRTUNE ((4 << 16) | 372)
+#define NX_TIEOFF_USB20OTG0_i_nPowerDown ((1 << 16) | 376)
+#define NX_TIEOFF_USB20OTG0_i_nSleep ((1 << 16) | 377)
+#define NX_TIEOFF_USB20OTG0_i_NX_RF1_EMA ((3 << 16) | 378)
+#define NX_TIEOFF_USB20OTG0_i_NX_RF1_EMAW ((2 << 16) | 381)
+#define NX_TIEOFF_USB20OTG0_i_ss_scaledown_mode ((2 << 16) |
384)
+#define NX_TIEOFF_USB20OTG0_i_gp_in ((16 << 16) | 386)
+#define NX_TIEOFF_USB20OTG0_i_sof_count ((14 << 16) |
402)
+#define NX_TIEOFF_USB20OTG0_i_sys_dma_done ((1 << 16) | 416)
+#define NX_TIEOFF_USB20OTG0_i_if_select_hsic ((1 << 16) | 417)
+#define NX_TIEOFF_USB20OTG0_i_nResetSync ((1 << 16) | 418)
+#define NX_TIEOFF_USB20OTG0_i_nUtmiResetSync ((1 << 16) | 419)
+#define NX_TIEOFF_USB20OTG0_i_SIDDQ ((1 << 16) | 420)
+#define NX_TIEOFF_USB20OTG0_i_VATESTENB ((2 << 16) |
421)
+#define NX_TIEOFF_USB20OTG0_i_POR_ENB ((1 << 16) | 423)
+#define NX_TIEOFF_USB20OTG0_i_POR ((1 << 16) | 424)
+#define NX_TIEOFF_USB20OTG0_i_REFCLKSEL ((2 << 16) |
425)
+#define NX_TIEOFF_USB20OTG0_i_FSEL ((3 << 16) | 427)
+#define NX_TIEOFF_USB20OTG0_i_COMMONONN ((1 << 16) |
430)
+#define NX_TIEOFF_USB20OTG0_i_RESREQIN ((1 << 16) | 431)
+#define NX_TIEOFF_USB20OTG0_i_PORTRESET ((1 << 16) |
432)
+#define NX_TIEOFF_USB20OTG0_i_OTGDISABLE ((1 << 16) | 433)
+#define NX_TIEOFF_USB20OTG0_i_LOOPBACKENB ((1 << 16) | 434)
+#define NX_TIEOFF_USB20OTG0_i_IDPULLUP ((1 << 16) | 435)
+#define NX_TIEOFF_USB20OTG0_i_DRVVBUS ((1 << 16) | 436)
+#define NX_TIEOFF_USB20OTG0_i_ADPCHRG ((1 << 16) | 437)
+#define NX_TIEOFF_USB20OTG0_i_ADPDISCHRG ((1 << 16) | 438)
+#define NX_TIEOFF_USB20OTG0_i_ADPPRBENB ((1 << 16) |
439)
+#define NX_TIEOFF_USB20OTG0_i_VBUSVLDEXT ((1 << 16) | 440)
+#define NX_TIEOFF_USB20OTG0_i_VBUSVLDEXTSEL ((1 << 16) | 441)
+#define NX_TIEOFF_USB20OTG0_i_DPPULLDOWN ((1 << 16) | 442)
+#define NX_TIEOFF_USB20OTG0_i_DMPULLDOWN ((1 << 16) | 443)
+#define NX_TIEOFF_USB20OTG0_i_SUSPENDM_ENB ((1 << 16) | 444)
+#define NX_TIEOFF_USB20OTG0_i_SUSPENDM ((1 << 16) | 445)
+#define NX_TIEOFF_USB20OTG0_i_SLEEPM_ENB ((1 << 16) | 446)
+#define NX_TIEOFF_USB20OTG0_i_SLEEPM ((1 << 16) | 447)
+#define NX_TIEOFF_USB20OTG0_i_OPMODE_ENB ((1 << 16) | 448)
+#define NX_TIEOFF_USB20OTG0_i_OPMODE ((2 << 16) | 449)
+#define NX_TIEOFF_USB20OTG0_i_TERMSEL_ENB ((1 << 16) | 451)
+#define NX_TIEOFF_USB20OTG0_i_TERMSEL ((1 << 16) | 452)
+#define NX_TIEOFF_USB20OTG0_i_XCVRSEL_ENB ((1 << 16) | 453)
+#define NX_TIEOFF_USB20OTG0_i_XCVRSEL ((2 << 16) | 454)
+#define NX_TIEOFF_USB20OTG0_i_WORDINTERFACE_ENB ((1 << 16) |
456)
+#define NX_TIEOFF_USB20OTG0_i_WORDINTERFACE ((1 << 16) | 457)
+#define NX_TIEOFF_USB20OTG0_i_TXBITSTUFFEN ((1 << 16) | 458)
+#define NX_TIEOFF_USB20OTG0_i_TXBITSTUFFENH ((1 << 16) | 459)
+#define NX_TIEOFF_USB20OTG0_i_BYPASSDPDATA ((1 << 16) | 460)
+#define NX_TIEOFF_USB20OTG0_i_BYPASSDMDATA ((1 << 16) | 461)
+#define NX_TIEOFF_USB20OTG0_i_BYPASSDPEN ((1 << 16) | 462)
+#define NX_TIEOFF_USB20OTG0_i_BYPASSDMEN ((1 << 16) | 463)
+#define NX_TIEOFF_USB20OTG0_i_BYPASSSEL ((1 << 16) |
464)
+#define NX_TIEOFF_USB20OTG0_i_COMPDISTUNE ((3 << 16) | 465)
+#define NX_TIEOFF_USB20OTG0_i_SQRXTUNE ((3 << 16) | 468)
+#define NX_TIEOFF_USB20OTG0_i_OTGTUNE ((3 << 16) | 471)
+#define NX_TIEOFF_USB20OTG0_i_TXHSXVTUNE ((2 << 16) | 474)
+#define NX_TIEOFF_USB20OTG0_i_TXFSLSTUNE ((4 << 16) | 476)
+#define NX_TIEOFF_USB20OTG0_i_TXVREFTUNE ((4 << 16) | 480)
+#define NX_TIEOFF_USB20OTG0_i_TXRISETUNE ((2 << 16) | 484)
+#define NX_TIEOFF_USB20OTG0_i_TXRESTUNE ((2 << 16) |
486)
+#define NX_TIEOFF_USB20OTG0_i_TXPREEMPAMPTUNE ((2 << 16) | 488)
+#define NX_TIEOFF_USB20OTG0_i_TXPREEMPPULSETUNE ((1 << 16) |
490)
+#define NX_TIEOFF_USB20OTG0_i_CHRGSEL ((1 << 16) | 491)
+#define NX_TIEOFF_USB20OTG0_i_VDATDETENB ((1 << 16) | 492)
+#define NX_TIEOFF_USB20OTG0_i_VDATSRCENB ((1 << 16) | 493)
+#define NX_TIEOFF_USB20OTG0_i_DCDENB ((1 << 16) | 494)
+#define NX_TIEOFF_USB20OTG0_i_ACAENB ((1 << 16) | 495)
+#define NX_TIEOFF_USB20OTG0_i_IDPULLUP_ENB ((1 << 16) | 496)
+#define NX_TIEOFF_USB20OTG0_i_DPPULLDOWN_ENB ((1 << 16) | 497)
+#define NX_TIEOFF_USB20OTG0_i_DMPULLDOWN_ENB ((1 << 16) | 498)
+#define NX_TIEOFF_USB20OTG0_i_DRVVBUS_ENB ((1 << 16) | 499)
+#define NX_TIEOFF_USB20OTG0_i_LPMClkMuxCntrl ((1 << 16) | 500)
+#define NX_TIEOFF_USB20OTG0_i_GLITCHLESSMUXCntrl ((1 << 16) | 501)
+#define NX_TIEOFF_CODA9600_i_nPWRDN00 ((4 << 16) | 502)
+#define NX_TIEOFF_CODA9600_i_nSLEEP00 ((4 << 16) | 506)
+#define NX_TIEOFF_CODA9600_i_nPWRDN01 ((8 << 16) | 512)
+#define NX_TIEOFF_CODA9600_i_nSLEEP01 ((8 << 16) | 520)
+#define NX_TIEOFF_CODA9600_i_nPWRDN02 ((10 << 16) | 528)
+#define NX_TIEOFF_CODA9600_i_nSLEEP02 ((10 << 16) | 544)
+#define NX_TIEOFF_CODA9600_i_nPWRDN03 ((2 << 16) | 554)
+#define NX_TIEOFF_CODA9600_i_nSLEEP03 ((2 << 16) | 556)
+#define NX_TIEOFF_CODA9600_i_nPWRDN04 ((8 << 16) | 558)
+#define NX_TIEOFF_CODA9600_i_nSLEEP04 ((8 << 16) | 566)
+#define NX_TIEOFF_CODA9600_i_nPWRDN05 ((3 << 16) | 576)
+#define NX_TIEOFF_CODA9600_i_nSLEEP05 ((3 << 16) | 579)
+#define NX_TIEOFF_CODA9600_i_nPWRDN06 ((7 << 16) | 582)
+#define NX_TIEOFF_CODA9600_i_nSLEEP06 ((7 << 16) | 589)
+#define NX_TIEOFF_CODA9600_i_nPWRDN07 ((12 << 16) | 596)
+#define NX_TIEOFF_CODA9600_i_nSLEEP07 ((12 << 16) | 608)
+#define NX_TIEOFF_CODA9600_i_nPWRDN08 ((1 << 16) | 620)
+#define NX_TIEOFF_CODA9600_i_nSLEEP08 ((1 << 16) | 621)
+#define NX_TIEOFF_CODA9600_i_nPWRDN09 ((2 << 16) | 622)
+#define NX_TIEOFF_CODA9600_i_nSLEEP09 ((2 << 16) | 624)
+#define NX_TIEOFF_CODA9600_i_nPWRDN10 ((10 << 16) | 626)
+#define NX_TIEOFF_CODA9600_i_nSLEEP10 ((10 << 16) | 640)
+#define NX_TIEOFF_CODA9600_i_nPWRDN11 ((1 << 16) | 650)
+#define NX_TIEOFF_CODA9600_i_nSLEEP11 ((1 << 16) | 651)
+#define NX_TIEOFF_CODA9600_i_TIE_rf2_EMAA ((3 << 16) | 652)
+#define NX_TIEOFF_CODA9600_i_TIE_rf2_EMAB ((3 << 16) | 655)
+#define NX_TIEOFF_CODA9600_i_TIE_rf2w_EMAA ((3 << 16) | 658)
+#define NX_TIEOFF_CODA9600_i_TIE_rf2w_EMAB ((3 << 16) | 661)
+#define NX_TIEOFF_CODA9600_i_TIE_ra2_EMAA ((3 << 16) | 664)
+#define NX_TIEOFF_CODA9600_i_TIE_ra2_EMAB ((3 << 16) | 667)
+#define NX_TIEOFF_CODA9600_i_TIE_ra2_EMAWA ((2 << 16) | 670)
+#define NX_TIEOFF_CODA9600_i_TIE_ra2_EMAWB ((2 << 16) | 672)
+#define NX_TIEOFF_CODA9600_i_TIE_ra2w_EMAA ((3 << 16) | 674)
+#define NX_TIEOFF_CODA9600_i_TIE_ra2w_EMAB ((3 << 16) | 677)
+#define NX_TIEOFF_CODA9600_i_TIE_ra2w_EMAWA ((2 << 16) | 680)
+#define NX_TIEOFF_CODA9600_i_TIE_ra2w_EMAWB ((2 << 16) | 682)
+#define NX_TIEOFF_CODA9600_i_TIE_rf1_EMA ((3 << 16) | 684)
+#define NX_TIEOFF_CODA9600_i_TIE_rf1_EMAW ((2 << 16) | 687)
+#define NX_TIEOFF_CODA9600_i_TIE_rf1w_EMA ((3 << 16) | 689)
+#define NX_TIEOFF_CODA9600_i_TIE_rf1w_EMAW ((2 << 16) | 692)
+#define NX_TIEOFF_DWC_GMAC0_sbd_flowctrl_i ((1 << 16) | 694)
+#define NX_TIEOFF_DWC_GMAC0_phy_intf_sel_i ((3 << 16) | 695)
+#define NX_TIEOFF_DWC_GMAC0_i_NX_RF2_EMAA ((3 << 16) | 698)
+#define NX_TIEOFF_DWC_GMAC0_i_NX_RF2_EMAB ((3 << 16) | 701)
+#define NX_TIEOFF_MALI4000_NX_DPSRAM_1R1W_EMAA ((3 << 16) | 704)
+#define NX_TIEOFF_MALI4000_NX_DPSRAM_1R1W_EMAB ((3 << 16) | 707)
+#define NX_TIEOFF_MALI4000_NX_SPSRAM_EMA ((3 << 16) | 710)
+#define NX_TIEOFF_MALI4000_NX_SPSRAM_EMAW ((2 << 16) | 713)
+#define NX_TIEOFF_MALI4000_NX_SPSRAM_BW_EMA ((3 << 16) | 715)
+#define NX_TIEOFF_MALI4000_NX_SPSRAM_BW_EMAW ((2 << 16) | 718)
+#define NX_TIEOFF_MALI4000_PWRDNBYPASS ((1 << 16) | 720)
+#define NX_TIEOFF_MALI4000_GP_NX_NPOWERDOWN ((15 << 16) | 721)
+#define NX_TIEOFF_MALI4000_GP_NX_NSLEEP ((15 << 16) |
736)
+#define NX_TIEOFF_MALI4000_L2_NX_NPOWERDOWN ((3 << 16) | 751)
+#define NX_TIEOFF_MALI4000_L2_NX_NSLEEP ((3 << 16) |
754)
+#define NX_TIEOFF_MALI4000_PP0_NX_NPOWERDOWN ((32 << 16) | 768)
+#define NX_TIEOFF_MALI4000_PP0_NX_NSLEEP ((32 << 16) | 800)
+#define NX_TIEOFF_MALI4000_PP1_NX_NPOWERDOWN ((32 << 16) | 832)
+#define NX_TIEOFF_MALI4000_PP1_NX_NSLEEP ((32 << 16) | 864)
+#define NX_TIEOFF_MALI4000_PP2_NX_NPOWERDOWN ((32 << 16) | 896)
+#define NX_TIEOFF_MALI4000_PP2_NX_NSLEEP ((32 << 16) | 928)
+#define NX_TIEOFF_MALI4000_PP3_NX_NPOWERDOWN ((32 << 16) | 960)
+#define NX_TIEOFF_MALI4000_PP3_NX_NSLEEP ((32 << 16) | 992)
+#define NX_TIEOFF_A3BM_AXI_PERI_BUS0_SYNCMODEREQm9 ((1 << 16) | 1024)
+#define NX_TIEOFF_A3BM_AXI_PERI_BUS0_SYNCMODEREQm10 ((1 << 16) | 1025)
+#define NX_TIEOFF_A3BM_AXI_PERI_BUS0_SYNCMODEREQm16 ((1 << 16) | 1026)
+#define NX_TIEOFF_A3BM_AXI_TOP_MASTER_BUS0_REMAP ((2 << 16) | 1027)
+#if defined(CONFIG_ARCH_S5P6818)
+#define NX_TIEOFF_Inst_ARMTOP_SMPEN ((4 << 16) | 2816)
+#define NX_TIEOFF_Inst_ARMTOP_STANBYWFI ((4 << 16) |
2880)
+#define NX_TIEOFF_Inst_ARMTOP_STANBYWFIL2 ((1 << 16) | 2884)
+#define NX_TIEOFF_Inst_ARMTOP_DBGNOPWRDWN ((4 << 16) | 2889)
+#define NX_TIEOFF_Inst_ARMTOP_DBGPWRUPREQ ((4 << 16) | 2893)
+#define NX_TIEOFF_Inst_ARMTOP_COREPWRDOWNPRE ((1 << 16) | 2901)
+#define NX_TIEOFF_Inst_ARMTOP_CPU0PWRDOWNPRE ((1 << 16) | 2902)
+#define NX_TIEOFF_Inst_ARMTOP_CPU1PWRDOWNPRE ((1 << 16) | 2903)
+#define NX_TIEOFF_Inst_ARMTOP_CPU2PWRDOWNPRE ((1 << 16) | 2904)
+#define NX_TIEOFF_Inst_ARMTOP_CPU3PWRDOWNPRE ((1 << 16) | 2905)
+#define NX_TIEOFF_Inst_ARMTOP_COREPWRDOWNALL ((1 << 16) | 2906)
+#define NX_TIEOFF_Inst_ARMTOP_CPU0PWRDOWNALL ((1 << 16) | 2907)
+#define NX_TIEOFF_Inst_ARMTOP_CPU1PWRDOWNALL ((1 << 16) | 2908)
+#define NX_TIEOFF_Inst_ARMTOP_CPU2PWRDOWNALL ((1 << 16) | 2909)
+#define NX_TIEOFF_Inst_ARMTOP_CPU3PWRDOWNALL ((1 << 16) | 2910)
+#define NX_TIEOFF_Inst_ARMTOP_CLAMPL2 ((1 << 16) | 2920)
+#define NX_TIEOFF_Inst_ARMTOP_L2FLUSHREQ ((1 << 16) | 3018)
+#define NX_TIEOFF_Inst_ARMTOP_L2FLUSHDONE ((1 << 16) | 3019)
+#define NX_TIEOFF_Inst_ARMTOP_ACINACTM ((1 << 16) | 3023)
+#define NX_TIEOFF_Inst_ARMTOP_P1_SMPEN ((4 << 16) | 3360)
+#define NX_TIEOFF_Inst_ARMTOP_P1_STANBYWFI ((4 << 16) | 3424)
+#define NX_TIEOFF_Inst_ARMTOP_P1_STANBYWFIL2 ((1 << 16) | 3428)
+#define NX_TIEOFF_Inst_ARMTOP_P1_DBGNOPWRDWN ((4 << 16) | 3442)
+#define NX_TIEOFF_Inst_ARMTOP_P1_DBGPWRUPREQ ((4 << 16) | 3443)
+#define NX_TIEOFF_Inst_ARMTOP_P1_DBGPWRDUP ((4 << 16) | 3444)
+#define NX_TIEOFF_Inst_ARMTOP_P1_COREPWRDOWNPRE ((1 << 16) |
3445)
+#define NX_TIEOFF_Inst_ARMTOP_P1_CPU0PWRDOWNPRE ((1 << 16) |
3446)
+#define NX_TIEOFF_Inst_ARMTOP_P1_CPU1PWRDOWNPRE ((1 << 16) |
3447)
+#define NX_TIEOFF_Inst_ARMTOP_P1_CPU2PWRDOWNPRE ((1 << 16) |
3448)
+#define NX_TIEOFF_Inst_ARMTOP_P1_CPU3PWRDOWNPRE ((1 << 16) |
3449)
+#define NX_TIEOFF_Inst_ARMTOP_P1_COREPWRDOWNALL ((1 << 16) |
3450)
+#define NX_TIEOFF_Inst_ARMTOP_P1_CPU0PWRDOWNALL ((1 << 16) |
3451)
+#define NX_TIEOFF_Inst_ARMTOP_P1_CPU1PWRDOWNALL ((1 << 16) |
3452)
+#define NX_TIEOFF_Inst_ARMTOP_P1_CPU2PWRDOWNALL ((1 << 16) |
3453)
+#define NX_TIEOFF_Inst_ARMTOP_P1_CPU3PWRDOWNALL ((1 << 16) |
3454)
+#define NX_TIEOFF_Inst_ARMTOP_P1_CLAMPL2 ((1 << 16) | 3464)
+#define NX_TIEOFF_Inst_ARMTOP_P1_L2FLUSHREQ ((1 << 16) | 3562)
+#define NX_TIEOFF_Inst_ARMTOP_P1_L2FLUSHDONE ((1 << 16) | 3563)
+#define NX_TIEOFF_Inst_ARMTOP_P1_ACINACTM ((1 << 16) | 3567)
+#endif
+
+#endif /* _NEXELL_TIEOFF_H */
--
1.9.1
